From owner-freebsd-usb@FreeBSD.ORG Sun May 8 14:10:10 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5784B106566B for ; Sun, 8 May 2011 14:10:10 +0000 (UTC) (envelope-from clay@milos.co.za) Received: from lisa.milos.co.za (lisa.milos.co.za [109.169.49.137]) by mx1.freebsd.org (Postfix) with ESMTP id 9BA2C8FC0A for ; Sun, 8 May 2011 14:10:04 +0000 (UTC) Received: (qmail 73481 invoked by uid 89); 8 May 2011 13:59:08 -0000 Received: from unknown (HELO claydesktop) (clay@milos.co.za@192.168.200.6) by lisa.milos.co.za with ESMTPA; 8 May 2011 13:59:08 -0000 Message-ID: From: "Clayton Milos" To: References: <201105050841.56095.hselasky@c2i.net><201105051009.55454.hselasky@c2i.net> Date: Sun, 8 May 2011 14:59:24 +0100 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5931 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5931 X-Mailman-Approved-At: Sun, 08 May 2011 14:14:55 +0000 Subject: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 May 2011 14:10:10 -0000 Hi there I'm looking for any help out there. I have a USB relay controller that should be seen as a modem. I think there was something similar working before under FreeBSD called a PICKit. When I look up the error I'm getting it points to this kit. The vendor ID seems to be the same. The chip on the controller I have is a PIC18F24 J50. When I plug it in on a FreeBSD8.2 AMD64 release I get the following: root: Unknown USB device: vendor 0x04d8 product 0x000a bus uhub2 kernel: ugen2.2: at usbus2 # usbconfig list ugen2.2: at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON If I plug it into my Linux netbook running Ubuntu it works fine and comes up as such: [ 4607.992101] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 4608.198575] usb 5-1: configuration #1 chosen from 1 choice [ 4608.234905] cdc_acm 5-1:1.0: ttyACM0: USB ACM device [ 4608.237372] usbcore: registered new interface driver cdc_acm [ 4608.237385] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters I can provide access to the machine with device plugged into it. Thanks Clay From owner-freebsd-usb@FreeBSD.ORG Sun May 8 18:56:43 2011 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A34961065670 for ; Sun, 8 May 2011 18:56:43 +0000 (UTC) (envelope-from torfinn.ingolfsen@broadpark.no) Received: from thalia-smout.broadpark.no (thalia-smout.broadpark.no [80.202.8.21]) by mx1.freebsd.org (Postfix) with ESMTP id 5DE9C8FC08 for ; Sun, 8 May 2011 18:56:43 +0000 (UTC) MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Received: from terra-smin.broadpark.no ([80.202.8.13]) by thalia-smout.broadpark.no (Sun Java(tm) System Messaging Server 7u3-15.01 64bit (built Feb 12 2010)) with ESMTP id <0LKW001TW1UGS270@thalia-smout.broadpark.no> for freebsd-usb@FreeBSD.org; Sun, 08 May 2011 19:56:40 +0200 (CEST) Received: from kg-v2.kg4.no ([84.48.120.215]) by terra-smin.broadpark.no (Sun Java(tm) System Messaging Server 7u3-15.01 64bit (built Feb 12 2010)) with SMTP id <0LKW00BV31UFAP00@terra-smin.broadpark.no> for freebsd-usb@FreeBSD.org; Sun, 08 May 2011 19:56:40 +0200 (CEST) Date: Sun, 08 May 2011 19:56:39 +0200 From: Torfinn Ingolfsen To: freebsd-usb@FreeBSD.org Message-id: <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> In-reply-to: References: <201105050841.56095.hselasky@c2i.net> <201105051009.55454.hselasky@c2i.net> X-Mailer: Sylpheed 3.1.0 (GTK+ 2.22.1; amd64-portbld-freebsd8.1) X-Face: "t9w2,-X@O^I`jVW\sonI3.,36KBLZE*AL[y9lL[PyFD*r_S:dIL9c[8Y>V42R0"!"yb_zN,f#%.[PYYNq; m"_0v; ~rUM2Yy!zmkh)3&U|u!=T(zyv,MHJv"nDH>OJ`t(@mil461d_B'Uo|'nMwlKe0Mv=kvV?Nh@>Hb<3s_z2jYgZhPb@?Wi^x1a~Hplz1.zH Content-transfer-encoding: quoted-printable Cc: Subject: Re: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 May 2011 18:56:43 -0000 On Sun, 08 May 2011 14:59:24 +0100 Clayton Milos wrote: > Hi there >=20 > I'm looking for any help out there. I have a USB relay controller that=20 > should be seen as a modem. I think there was something similar working=20 > before under FreeBSD called a PICKit. When I look up the error I'm gettin= g=20 > it points to this kit. The vendor ID seems to be the same. >=20 > The chip on the controller I have is a PIC18F24 J50. >=20 > When I plug it in on a FreeBSD8.2 AMD64 release I get the following: > root: Unknown USB device: vendor 0x04d8 product 0x000a bus uhub2 > kernel: ugen2.2: at usbus2 >=20 > # usbconfig list > ugen2.2: at usbus2,= =20 > cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON That could be a CDCE device (communication class - ethernet). See cdce(4) m= an page. Try to load the if_cdce kernel module, then plug in your device. If that doen'st work, I'=E6m out of ideas. --=20 Torfinn From owner-freebsd-usb@FreeBSD.ORG Sun May 8 22:33:34 2011 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7C262106564A for ; Sun, 8 May 2011 22:33:34 +0000 (UTC) (envelope-from torfinn.ingolfsen@broadpark.no) Received: from thalia-smout.broadpark.no (thalia-smout.broadpark.no [80.202.8.21]) by mx1.freebsd.org (Postfix) with ESMTP id 342498FC13 for ; Sun, 8 May 2011 22:33:34 +0000 (UTC) MIME-version: 1.0 Content-transfer-encoding: 7BIT Content-type: text/plain; CHARSET=US-ASCII Received: from terra-smin.broadpark.no ([80.202.8.13]) by thalia-smout.broadpark.no (Sun Java(tm) System Messaging Server 7u3-15.01 64bit (built Feb 12 2010)) with ESMTP id <0LKW004X4ENWHXB0@thalia-smout.broadpark.no> for freebsd-usb@FreeBSD.org; Mon, 09 May 2011 00:33:33 +0200 (CEST) Received: from kg-v2.kg4.no ([84.48.120.215]) by terra-smin.broadpark.no (Sun Java(tm) System Messaging Server 7u3-15.01 64bit (built Feb 12 2010)) with SMTP id <0LKW00C3FENWQXG0@terra-smin.broadpark.no> for freebsd-usb@FreeBSD.org; Mon, 09 May 2011 00:33:32 +0200 (CEST) Date: Mon, 09 May 2011 00:33:32 +0200 From: Torfinn Ingolfsen To: freebsd-usb@FreeBSD.org Message-id: <20110509003332.6c03a93a.torfinn.ingolfsen@broadpark.no> In-reply-to: <19D6F25774644079A2F18331E87C773D@claydesktop> References: <201105050841.56095.hselasky@c2i.net> <201105051009.55454.hselasky@c2i.net> <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> <19D6F25774644079A2F18331E87C773D@claydesktop> X-Mailer: Sylpheed 3.1.0 (GTK+ 2.22.1; amd64-portbld-freebsd8.1) X-Face: "t9w2,-X@O^I`jVW\sonI3.,36KBLZE*AL[y9lL[PyFD*r_S:dIL9c[8Y>V42R0"!"yb_zN,f#%.[PYYNq; m"_0v; ~rUM2Yy!zmkh)3&U|u!=T(zyv,MHJv"nDH>OJ`t(@mil461d_B'Uo|'nMwlKe0Mv=kvV?Nh@>Hb<3s_z2jYgZhPb@?Wi^x1a~Hplz1.zH Cc: Subject: Re: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 May 2011 22:33:34 -0000 On Sun, 08 May 2011 20:46:41 +0100 Clayton Milos wrote: > Thanks Torfinn but that didn't work. It stil ldid not pick the device up. > In Linux it picks it up as a modem and from what I've read up on the > internet you connect to the virtual serial port to control the relays. You hvae troed the various usb serial modules, have you? Like uark(4), ubsa(4), ubser(4), uchcom(4), uftdi(4), uplcom(4), uslcom (4), uvscom(4) and umcs7840(4)? HTH -- Torfinn From owner-freebsd-usb@FreeBSD.ORG Sun May 8 19:46:28 2011 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3C94C1065670 for ; Sun, 8 May 2011 19:46:28 +0000 (UTC) (envelope-from clay@milos.co.za) Received: from lisa.milos.co.za (lisa.milos.co.za [109.169.49.137]) by mx1.freebsd.org (Postfix) with ESMTP id AF8CE8FC13 for ; Sun, 8 May 2011 19:46:27 +0000 (UTC) Received: (qmail 98707 invoked by uid 89); 8 May 2011 19:46:25 -0000 Received: from unknown (HELO claydesktop) (clay@milos.co.za@192.168.200.6) by lisa.milos.co.za with ESMTPA; 8 May 2011 19:46:25 -0000 Message-ID: <19D6F25774644079A2F18331E87C773D@claydesktop> From: "Clayton Milos" To: "Torfinn Ingolfsen" , References: <201105050841.56095.hselasky@c2i.net><201105051009.55454.hselasky@c2i.net> <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> Date: Sun, 8 May 2011 20:46:41 +0100 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5931 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5931 X-Mailman-Approved-At: Mon, 09 May 2011 00:13:22 +0000 Cc: Subject: Re: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 08 May 2011 19:46:28 -0000 ----- Original Message ----- From: "Torfinn Ingolfsen" To: Sent: Sunday, May 08, 2011 6:56 PM Subject: Re: Relay controller On Sun, 08 May 2011 14:59:24 +0100 Clayton Milos wrote: > Hi there > > I'm looking for any help out there. I have a USB relay controller that > should be seen as a modem. I think there was something similar working > before under FreeBSD called a PICKit. When I look up the error I'm getting > it points to this kit. The vendor ID seems to be the same. > > The chip on the controller I have is a PIC18F24 J50. > > When I plug it in on a FreeBSD8.2 AMD64 release I get the following: > root: Unknown USB device: vendor 0x04d8 product 0x000a bus uhub2 > kernel: ugen2.2: at usbus2 > > # usbconfig list > ugen2.2: at usbus2, > cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON That could be a CDCE device (communication class - ethernet). See cdce(4) man page. Try to load the if_cdce kernel module, then plug in your device. If that doen'st work, I'æm out of ideas. -- Torfinn Thanks Torfinn but that didn't work. It stil ldid not pick the device up. In Linux it picks it up as a modem and from what I've read up on the internet you connect to the virtual serial port to control the relays. Clay From owner-freebsd-usb@FreeBSD.ORG Mon May 9 02:53:28 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6068C106564A for ; Mon, 9 May 2011 02:53:28 +0000 (UTC) (envelope-from s.dave.jones@gmail.com) Received: from mail-ww0-f50.google.com (mail-ww0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id F00708FC08 for ; Mon, 9 May 2011 02:53:27 +0000 (UTC) Received: by wwc33 with SMTP id 33so4896322wwc.31 for ; Sun, 08 May 2011 19:53:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:date:message-id:subject:from:to :content-type; bh=DVqm5Jvsv0ZS8CHgqdlCLkwNL1LvjWeRr+/LcAXcFbk=; b=Ua1bD4zKmkJfICpsXyHLP5KWo603dQOsfZ0Rw4+BCGRwzNandG/Iqt3fhE1wYW1vLA spLzKvm2ICkFK7n9edu5wICe6C4uOHW2MdhFh+/S5QpFpEwrotKSJ3jslq7mmmeLMX6s f30RWF7eSokPTGQBEAVfulz8yTokDoUN6s4fE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=fs5IZWIoB7bYMrmiLXKKoh3D/SECon82jjaZwAcJwmUuPKlU8X2eLuj03dYJ0R7ADU gbCK3eciKht/kNHqLFXDOShbTUtkjpwk9PmeckHKy+E8WkJCWj9dTb9aVeiNA6A5W8ym aNL79pOipraLNYDw6MRI8AYiPG+nrX9jy1pWE= MIME-Version: 1.0 Received: by 10.216.9.141 with SMTP id 13mr2103821wet.73.1304907754755; Sun, 08 May 2011 19:22:34 -0700 (PDT) Received: by 10.216.1.212 with HTTP; Sun, 8 May 2011 19:22:34 -0700 (PDT) Date: Mon, 9 May 2011 10:22:34 +0800 Message-ID: From: dave jones To: freebsd-usb@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: Problem with automount usb sd reader X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 May 2011 02:53:28 -0000 Hello, I have a usb-based sdcard reader in my computer: umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed) da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 If I want to mount the sd card, I have to run "true > /dev/da0" first to create /dev/da0s1 device node. In order to automount, I was trying to add the following lines in /etc/devd.conf but doesn't work. attach 10 { device-name "umass0"; action "true > /dev/da0; mount /dev/da0s1 /mnt"; }; Any solutions? Thank you. BR. Dave. From owner-freebsd-usb@FreeBSD.ORG Mon May 9 06:43:04 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4DC9F1065674 for ; Mon, 9 May 2011 06:43:04 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe04.c2i.net [212.247.154.98]) by mx1.freebsd.org (Postfix) with ESMTP id C82AE8FC15 for ; Mon, 9 May 2011 06:43:03 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.1 cv=wd7fLirDSts22yawIUsTeMUS9lsm8Llc0grT6RvpTjU= c=1 sm=1 a=SvYTsOw2Z4kA:10 a=WQU8e4WWZSUA:10 a=8nJEP1OIZ-IA:10 a=CL8lFSKtTFcA:10 a=i9M/sDlu2rpZ9XS819oYzg==:17 a=Ylkrha_eYUUgcOKjUFEA:9 a=wPNLvfGTeEIA:10 a=i9M/sDlu2rpZ9XS819oYzg==:117 Received: from [188.126.198.129] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe04.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 123662353; Mon, 09 May 2011 08:43:01 +0200 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Mon, 9 May 2011 08:41:51 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.2-STABLE; KDE/4.4.5; amd64; ; ) References: <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> In-Reply-To: <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> X-Face: *nPdTl_}RuAI6^PVpA02T?$%Xa^>@hE0uyUIoiha$pC:9TVgl.Oq,NwSZ4V" =?iso-8859-1?q?=7CLR=2E+tj=7Dg5=0A=09=25V?=,x^qOs~mnU3]Gn; cQLv&.N>TrxmSFf+p6(30a/{)KUU!s}w\IhQBj}[g}bj0I3^glmC( =?iso-8859-1?q?=0A=09=3AAuzV9=3A=2EhESm-x4h240C=609=3Dw?= MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <201105090841.51402.hselasky@c2i.net> Cc: Subject: Re: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 May 2011 06:43:04 -0000 On Sunday 08 May 2011 19:56:39 Torfinn Ingolfsen wrote: > > # usbconfig list > > ugen2.2: at > > usbus2, cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON >=20 > That could be a CDCE device (communication class - ethernet). See cdce(4) > man page. Try to load the if_cdce kernel module, then plug in your device. > If that doen'st work, I'=E6m out of ideas. > --=20 > Torfinn The modem part of CDC is implemented by umodem. kldload umodem =2D-HPS From owner-freebsd-usb@FreeBSD.ORG Mon May 9 06:54:45 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 89C621065670 for ; Mon, 9 May 2011 06:54:45 +0000 (UTC) (envelope-from clay@milos.co.za) Received: from lisa.milos.co.za (lisa.milos.co.za [109.169.49.137]) by mx1.freebsd.org (Postfix) with ESMTP id E043B8FC0C for ; Mon, 9 May 2011 06:54:44 +0000 (UTC) Received: (qmail 46639 invoked by uid 89); 9 May 2011 06:54:43 -0000 Received: from unknown (HELO claydesktop) (clay@milos.co.za@192.168.200.6) by lisa.milos.co.za with ESMTPA; 9 May 2011 06:54:43 -0000 Message-ID: <270018E094F84E4EB7570378427D2C26@claydesktop> From: "Clayton Milos" To: "Hans Petter Selasky" , References: <20110508195639.fce81709.torfinn.ingolfsen@broadpark.no> <201105090841.51402.hselasky@c2i.net> Date: Mon, 9 May 2011 07:54:58 +0100 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5931 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5931 X-Mailman-Approved-At: Mon, 09 May 2011 11:05:53 +0000 Cc: Subject: Re: Relay controller X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 May 2011 06:54:45 -0000 ----- Original Message ----- From: "Hans Petter Selasky" To: Sent: Monday, May 09, 2011 7:41 AM Subject: Re: Relay controller On Sunday 08 May 2011 19:56:39 Torfinn Ingolfsen wrote: > > # usbconfig list > > ugen2.2: at > > usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > > That could be a CDCE device (communication class - ethernet). See cdce(4) > man page. Try to load the if_cdce kernel module, then plug in your device. > If that doen'st work, I'æm out of ideas. > -- > Torfinn The modem part of CDC is implemented by umodem. kldload umodem --HPS Thanks Hans It looks like it's found it. I'll check if I can access it now. Clay _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" From owner-freebsd-usb@FreeBSD.ORG Mon May 9 11:07:17 2011 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6B87A106564A for ; Mon, 9 May 2011 11:07:17 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 59A158FC1D for ; Mon, 9 May 2011 11:07:17 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p49B7Hgv070784 for ; Mon, 9 May 2011 11:07:17 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p49B7G1e070780 for freebsd-usb@FreeBSD.org; Mon, 9 May 2011 11:07:16 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 9 May 2011 11:07:16 GMT Message-Id: <201105091107.p49B7G1e070780@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-usb@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-usb@FreeBSD.org X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 May 2011 11:07:17 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o usb/156735 usb Need Quirk for Goflex USB Disk Drives o usb/156725 usb USB stack stall cause complete system input loss o usb/156596 usb [ehci] Extremely high interrupt rate on ehci/uhci IRQ1 o usb/156000 usb rum(4) Fatal trap 18: integer divide fault while in ke o usb/155996 usb NanoBSD not booted as Disk o usb/155784 usb Problem with Transcend StoreJet 25M3 (2AJ1) on Asus M2 o usb/155663 usb [usbdevs] [patch] Add support for Supertop Nano 1GB US o usb/155496 usb [usb][patch] support BUFFALO WLI-U2-SG54HG wireless o usb/154753 usb [usbdevs] [patch] Support for Qualcomm USB modem/stora o usb/154710 usb [ugen] Conexant USB Modem is not working in 8.x. In 7. o usb/154506 usb [umass] Copying dir with large files makes FreeBSD loa o usb/154192 usb [umass] In Garmin Oregon GPS, only the first umass dev o i386/153851 usb [keyboard] keyboard issues on new Intel Mother boards. o usb/153703 usb [keyboard] My USB keyboard can not be used in 8-STABLE o usb/153609 usb [zyd] [panic] kernel: Fatal trap 12: page fault while o usb/153599 usb [usbdevs] [patch] Feiya Elango USB MicroSD reader sync o usb/153149 usb [umass] USB stick quirk regression [regression] o usb/152075 usb [usb8] [ehci] [request] Add quirk for CS5536 USB o usb/150892 usb [zyd] Whenever network contacted in any shape, way or o usb/150189 usb [run] [usb8] [patch] if_run appears to corrupt IP traf p usb/149934 usb [patch] [usb8] Transcend JetFlash V85 poor performance p usb/149900 usb [uftdi] [patch] FreeBSD 8.1 uftdi patch to support usb p usb/149764 usb [u3g] [patch] usbdevs update: Huawei K3765 3G modem o usb/149528 usb [zyd] Wireless USB stick not detected - vendor id 0x08 o usb/149283 usb [uftdi] avrdude unable to talk to Arduino board (via u o usb/149162 usb [ural] ASUS WL-167g doesn't work in 8.1 (continue of 1 s usb/148702 usb [usb8] [request] IO DATA USB-RSAQ5 support on FreeBSD- o usb/148080 usb usbconfig(8) sometimes does not turn off the device o usb/147516 usb [umass] [usb67] kernel unable to deal with Olympus USB o i386/147475 usb [install] FreeBSD 8.x does not install on ASUS K8N4-E p usb/146871 usb [usbdevs] [usb8] [patch] provide descriprive string fo o usb/146840 usb [hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup after e o usb/146153 usb [axe] [usb8] Hosts in network doesn't receive any pack o usb/146054 usb [urtw] [usb8] urtw driver potentially out of date f usb/145513 usb [usb8] New USB stack: no new devices after forced usb p usb/145455 usb [usb8] [patch] USB debug support cannot be disabled o usb/145415 usb [umass] [usb8] USB card reader does not create slices a usb/145184 usb GENERIC can't mount root from USB on Asus EEE o usb/145165 usb [keyboard] [usb8] ukbd_set_leds_callback: error=USB_ER f kern/144938 usb [keyboard] [boot] Boot Failure with Apple (MB869LL/A) o usb/144387 usb [run] [panic] if_run panic o usb/144043 usb [umass] [usb8] USB DLT tape drive throws random errors a usb/143790 usb [boot] [cam] can not boot from usb hdd f usb/143620 usb [cdce] [usb8] the module if_cdce doesn't support my Op f usb/143294 usb [usb8] copying process stops at some time (10 - 50 sec o usb/143286 usb [ukbd] [usb8] [boot] boot failures on RELENG_8 system p usb/143186 usb [usbdevs] [usb8] [patch] add USB device IDs for Google a usb/143139 usb [umass] [usb8] [patch] Quirk for Century EX35SW4_SB4 J o usb/143045 usb [umass] [usb8] [patch] mounting Fujitsu 2600Z camera d o usb/142991 usb [uftdi] [usb67] [patch] Patch to add Crystalfontz 533 f usb/142989 usb [usb8] canon eos 50D attaches but detaches after few s f usb/142957 usb [umass] [usb8] [patch] patch for USB disk SYNCHRONIZE o usb/142719 usb [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fa o usb/142713 usb [usb67] [panic] Kernel Panik when connecting an IPhone f usb/142276 usb [umass] [usb8] Cache Synchronization Error with Olympu o usb/142229 usb [ums] [usb8] [hang] connecting a USB mouse to a Dell P o usb/141777 usb [usb8] [usbdevs] [rum] [patch] Support usbdevs / rum(4 f usb/141680 usb [uath] [usb8] Netgear WG111T not working with uath dri o usb/141664 usb [pcm] [usb8] Logitech USB microphone failure [regressi o usb/141474 usb [boot] [usb8] FreeBSD 8.0 can not install from USB CDR o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER o kern/141011 usb [usb8] Encrypted root, geli password at boot; enter ke o usb/140920 usb [install] [usb8] USB based install fails on 8.0-RELEAS o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0- a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A s usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after a usb/139598 usb [umass] [usb8] CAM reports "xptioctl: put "device pass o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor a usb/138904 usb [rum] [panic] [usb67] unpluging USB wifi card panics s f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT s usb/138570 usb [usb67] [panic] USB mass device panics current 7.2-STA o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit o usb/138124 usb [snd_uaudio] [usb8] Axed uaudio functionality in the u o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is o usb/137872 usb [usb67] [boot] slow booting on usb flash drive o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no o usb/137377 usb [usb8] request support for Huawei E180 o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro f usb/137190 usb [usb8][patch] inhibit spurious button releases for som o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo p usb/137188 usb [usb8][patch] correctly handle USB report descriptors o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa o usb/135348 usb [umass] [patch] USB Drive Hangs with ZFS (JMicron USB2 o usb/135206 usb machine reboots when inserted USB device f usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu o usb/135182 usb UMASS quirk - Olympus FE20 camera o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g o usb/134193 usb System freeze on usb MP3 player insertion o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive o usb/133989 usb [usb8] [ukbd] USB keyboard dead at mountroot> prompt o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache o usb/133296 usb [rum] driver not working properly in hostap mode o usb/132594 usb USB subsystem causes page fault and crashes o usb/132080 usb [patch] [usb] [rum] [panic] Kernel panic after NOMEM c o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760 o usb/132036 usb [panic] page fault when connecting Olympus C740 camera o usb/131583 usb [umass] Failure when detaching umass Device o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data o usb/131521 usb Registering Belkin UPS to usb_quirks.c p usb/131123 usb [patch] [usb67] re-add UQ_ASSUME_CM_OVER_DATA USB quir o usb/131074 usb no run-time detection of usb devices plugged into exte o usb/130736 usb Page fault unplugging USB stick o usb/130230 usb [patch] [quirk] [usb67] [usb] [cam] [umass] Samsung El o usb/130208 usb Boot process severely hampered by umass0 error o usb/130122 usb [usb8] DVD drive detects as 'da' device f usb/129766 usb [usb] [panic] plugging in usb modem HUAWEI E226 panics o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis o usb/129311 usb [usb] [panic] Instant crash with an USB card reader s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa o usb/128977 usb [usb67] [patch] uaudio is not full duplex p usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2 o usb/128485 usb [umodem] [patch] Nokia N80 modem support o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like o usb/127926 usb [boot] USB Timeout during bootup s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support o usb/127248 usb [ucom] panic while uplcom devices attach and detach o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c o usb/126848 usb [usb]: USB Keyboard hangs during Installation o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be o usb/126519 usb [usb] [panic] panic when plugging in an iphone o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d o usb/125450 usb [panic] Removing USB flash card while being accessed c o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe o usb/124758 usb [rum] [panic] rum panics SMP kernel o usb/124708 usb [panic] Kernel panic on USB KVM reattach o kern/124130 usb [usb] gmirror fails to start usb devices that were pre o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with o usb/123691 usb usbd(8): usbd hangs o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa s usb/122819 usb [usb67] [patch] Patch to provide dynamic additions to o usb/122813 usb [udbp] [request] udbp driver should be removed in favo o usb/122547 usb [ehci] USB Printer not being recognized after reboot o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE o usb/122119 usb [umass] umass device causes creation of daX but not da o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic o usb/121734 usb [ugen] ugen HP1022 printer device not working since up o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s f usb/121232 usb [usb67] [panic] USB CardBus card removal causes reboot o usb/121169 usb [umass] Issues with usb mp3 player o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS f usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det o usb/120729 usb [panic] fault while in kernel mode with connecting USB o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression] o usb/119509 usb [usb] USB flaky on Dell Optiplex 755 o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work o usb/117893 usb [umass] Lacie USB DVD writing failing o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory o usb/117598 usb [snd_uaudio] [patch] Not possible to record with Plant o usb/117313 usb [umass] [panic] panic on usb camera insertion o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a p usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th p usb/116699 usb [usb] [usb67] USB HID devices do not initialize at sys o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300 o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco o usb/114682 usb [umass] generic USB media-card reader unusable o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff s usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele p usb/101775 usb [usb67] [libusbhid] [patch] possible error in report d o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar o kern/99200 usb [usb67] SMP-Kernel crashes reliably when Bluetooth con o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3 o usb/97472 usb [cam] [patch] add support for Olympus C150,D390 s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2. o usb/97175 usb [umass] [hang] USB cardreader hangs system o usb/96457 usb [umass] [panic] fatback on umass = reboot o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync s usb/96120 usb [ums] [request] USB mouse not always detected s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620 o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen o usb/95037 usb [umass] USB disk not recognized on hot-plug. o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI o usb/94384 usb [panic] kernel panic with usb2 hardware o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work o usb/92852 usb [ums] [patch] Vertical scroll not working properly on o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg f usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return " o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500 o usb/91283 usb [boot] [regression] booting very slow with usb devices o usb/91238 usb [umass] USB tape unit fails to write a second tape fil o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas o usb/89954 usb [umass] [panic] USB Disk driver race condition? s usb/89003 usb [request] LaCie Firewire drive not properly supported o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg o usb/88408 usb [axe] axe0 read PHY failed o usb/87648 usb [mouse] Logitech USB-optical mouse problem. f usb/87224 usb [usb] Cannot mount USB Zip750 o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the o usb/86298 usb [mouse] Known good USB mouse won't work with correct s s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN o usb/83863 usb [ugen] Communication problem between opensc/openct via o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55. o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me s usb/80777 usb [request] usb_rem_task() should wait for callback to c s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_ o usb/80774 usb [patch] have "usbd_find_desc" in line with the other " o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails f usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze o usb/79723 usb [usb] [request] prepare for high speed isochronous tra o usb/78984 usb [umass] [patch] Creative MUVO umass failure f usb/77294 usb [ucom] [panic] ucom + ulpcom panic o usb/76732 usb [ums] Mouse problems with USB KVM Switch o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device f usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0 s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for f usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace) f usb/74771 usb [umass] [hang] mounting write-protected umass device a s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R o usb/73307 usb [panic] Kernel panics on USB disconnect s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1 o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction o usb/67301 usb [uftdi] [panic] RTS and system panic o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans s bin/57255 usb [patch] usbd(8) and multi-function devices s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2 s usb/51958 usb [urio] [patch] update for urio driver o usb/40948 usb [umass] [request] USB HP CDW8200 does not work o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem 313 problems total. From owner-freebsd-usb@FreeBSD.ORG Tue May 10 16:32:52 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 15E58106566C for ; Tue, 10 May 2011 16:32:52 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1-6.sentex.ca [IPv6:2607:f3e0:0:1::12]) by mx1.freebsd.org (Postfix) with ESMTP id C3C3A8FC13 for ; Tue, 10 May 2011 16:32:51 +0000 (UTC) Received: from smtp2.sentex.ca (smtp2c.sentex.ca [64.7.153.30]) by smarthost1.sentex.ca (8.14.4/8.14.4) with ESMTP id p4AGWnKu096302 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Tue, 10 May 2011 12:32:49 -0400 (EDT) (envelope-from mike@sentex.net) Received: from pyroxene.sentex.ca ([IPv6:2607:f3e0:0:3::18]) by smtp2.sentex.ca (8.14.4/8.14.4) with ESMTP id p4AGWn6B013564 for ; Tue, 10 May 2011 12:32:49 -0400 (EDT) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (saphire3.sentex.net [192.168.43.26]) by pyroxene.sentex.ca (8.14.4/8.14.3) with ESMTP id p4AGWmuP021291 for ; Tue, 10 May 2011 12:32:48 -0400 (EDT) (envelope-from mike@sentex.net) Message-ID: <4DC9689F.60506@sentex.net> Date: Tue, 10 May 2011 12:32:31 -0400 From: Mike Tancsa Organization: Sentex Communications User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.13) Gecko/20101207 Thunderbird/3.1.7 MIME-Version: 1.0 To: freebsd-usb@freebsd.org X-Enigmail-Version: 1.1.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Virus-Scanned: clamav-milter 0.95.1 at smtp2.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.67 on 64.7.153.18 Subject: usb errors on RELENG_8 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 10 May 2011 16:32:52 -0000 I am trying to monitor a boat load of UPSes off a soekris 5501 (same error on an Alix box) and a pair of USB hubs. It seems I can only have one USB hub plug in at a time. If I plug just one in, all is ok. But if two are plugged in, I get a stream of errors like this. Is this some sort of device or driver limitation ? ugen1.11: at usbus1 (disconnected) uhub_reattach_port: could not allocate new device usb_alloc_device: set address 11 failed (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=11, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=11, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 11 failed, USB_ERR_STALLED ugen1.11: at usbus1 (disconnected) uhub_reattach_port: could not allocate new device ugen0.1: at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen1.1: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.3: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.4: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.5: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.6: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.7: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.8: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.9: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.10: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ From owner-freebsd-usb@FreeBSD.ORG Tue May 10 19:19:43 2011 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2C7F21065670; Tue, 10 May 2011 19:19:43 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 036E48FC15; Tue, 10 May 2011 19:19:43 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p4AJJgO5070125; Tue, 10 May 2011 19:19:42 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p4AJJgZr070121; Tue, 10 May 2011 19:19:42 GMT (envelope-from linimon) Date: Tue, 10 May 2011 19:19:42 GMT Message-Id: <201105101919.p4AJJgZr070121@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-amd64@FreeBSD.org, freebsd-usb@FreeBSD.org From: linimon@FreeBSD.org Cc: Subject: Re: usb/156898: [keyboard] usb keyboard does not work while boot (ps2 keyboard works perfect) X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 10 May 2011 19:19:43 -0000 Old Synopsis: usb keyboard does not work while boot (ps2 keyboard works perfect) New Synopsis: [keyboard] usb keyboard does not work while boot (ps2 keyboard works perfect) Responsible-Changed-From-To: freebsd-amd64->freebsd-usb Responsible-Changed-By: linimon Responsible-Changed-When: Tue May 10 19:19:26 UTC 2011 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=156898 From owner-freebsd-usb@FreeBSD.ORG Tue May 10 20:07:59 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CA1FB1065673 for ; Tue, 10 May 2011 20:07:59 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1-6.sentex.ca [IPv6:2607:f3e0:0:1::12]) by mx1.freebsd.org (Postfix) with ESMTP id 540D68FC15 for ; Tue, 10 May 2011 20:07:59 +0000 (UTC) Received: from smtp2.sentex.ca (smtp2c.sentex.ca [64.7.153.30]) by smarthost1.sentex.ca (8.14.4/8.14.4) with ESMTP id p4AK7upq038185 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Tue, 10 May 2011 16:07:56 -0400 (EDT) (envelope-from mike@sentex.net) Received: from pyroxene.sentex.ca ([IPv6:2607:f3e0:0:3::18]) by smtp2.sentex.ca (8.14.4/8.14.4) with ESMTP id p4AK7uZ3018224 for ; Tue, 10 May 2011 16:07:56 -0400 (EDT) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (saphire3.sentex.net [192.168.43.26]) by pyroxene.sentex.ca (8.14.4/8.14.3) with ESMTP id p4AK7tP2028329 for ; Tue, 10 May 2011 16:07:55 -0400 (EDT) (envelope-from mike@sentex.net) Message-ID: <4DC99B0A.5090301@sentex.net> Date: Tue, 10 May 2011 16:07:38 -0400 From: Mike Tancsa Organization: Sentex Communications User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.13) Gecko/20101207 Thunderbird/3.1.7 MIME-Version: 1.0 To: freebsd-usb@freebsd.org References: <4DC9689F.60506@sentex.net> In-Reply-To: <4DC9689F.60506@sentex.net> X-Enigmail-Version: 1.1.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Virus-Scanned: clamav-milter 0.95.1 at smtp2.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.67 on 64.7.153.18 Subject: Re: usb errors on RELENG_8 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 10 May 2011 20:07:59 -0000 On 5/10/2011 12:32 PM, Mike Tancsa wrote: > I am trying to monitor a boat load of UPSes off a soekris 5501 (same error on an Alix box) and a pair of USB hubs. It seems I can only have one USB hub plug in at a time. If I plug just one in, all is ok. But if two are plugged in, I get a stream of errors like this. Is this some sort of device or driver limitation ? > > ugen1.11: at usbus1 (disconnected) Some other odd things. If we plug in a new UPS to the hub, it fails usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 13 failed, USB_ERR_STALLED ugen1.13: at usbus1 (disconnected) but, if we plug it in, then reboot the box, it seems to work. 0[upsmon1]# usbconfig ugen0.1: at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen1.1: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.3: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.4: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.5: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.6: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.7: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.8: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.9: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.10: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.11: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.12: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen1.13: at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON 0[upsmon1]# Also, I noticed at bootup time, I get the following error consistently uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.2: at usbus1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.3: at usbus1 Root mount waiting for: usbus1 ugen1.4: at usbus1 Root mount waiting for: usbus1 ugen1.5: at usbus1 Root mount waiting for: usbus1 ugen1.6: at usbus1 uhub3: on usbus1 Root mount waiting for: usbus1 uhub3: 7 ports with 7 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 usb_alloc_device: set address 7 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=7, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_STALLED Root mount waiting for: usbus1 ugen1.7: at usbus1 Root mount waiting for: usbus1 ugen1.8: at usbus1 Root mount waiting for: usbus1 ugen1.9: at usbus1 ugen1.10: at usbus1 Root mount waiting for: usbus1 ugen1.11: at usbus1 Root mount waiting for: usbus1 ugen1.12: at usbus1 Root mount waiting for: usbus1 ugen1.13: at usbus1 Trying to mount root from ufs:/dev/ad0s1a The error seems to follow the first port of the second HUB that is plugged in. Also, unplugging and replugging a device gives ugen1.3: at usbus1 (disconnected) usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED ugen1.3: at usbus1 (disconnected) uhub_reattach_port: could not allocate new device uhub_reattach_port: giving up port reset - device vanished usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED ugen1.3: at usbus1 (disconnected) uhub_reattach_port: could not allocate new device ugen1.7: at usbus1 (disconnected) usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED ugen1.3: at usbus1 0[upsmon1]# sysctl -a dev.usbus dev.usbus.0.%desc: OHCI (generic) USB controller dev.usbus.0.%driver: usbus dev.usbus.0.%parent: ohci0 dev.usbus.1.%desc: AMD CS5536 (Geode) USB 2.0 controller dev.usbus.1.%driver: usbus dev.usbus.1.%parent: ehci0 0[upsmon1]# sysctl -a hw.usb hw.usb.ehci.lostintrbug: 0 hw.usb.ehci.iaadbug: 0 hw.usb.ehci.no_hs: 0 hw.usb.ehci.debug: 0 hw.usb.ohci.debug: 0 hw.usb.uhci.loop: 0 hw.usb.uhci.debug: 0 hw.usb.no_boot_wait: 0 hw.usb.ctrl.debug: 0 hw.usb.umass.debug: 0 hw.usb.debug: 0 hw.usb.dev.debug: 0 hw.usb.usb_lang_mask: 255 hw.usb.usb_lang_id: 9 hw.usb.template: 0 hw.usb.ugen.debug: 0 hw.usb.power_timeout: 30 hw.usb.uhub.debug: 0 hw.usb.no_pf: 0 hw.usb.proc.debug: 0 hw.usb.pr_recovery_delay: 250 hw.usb.pr_poll_delay: 50 hw.usb.ubsa.debug: 0 hw.usb.uftdi.debug: 0 hw.usb.uplcom.debug: 0 hw.usb.uslcom.debug: 0 hw.usb.uvisor.debug: 0 hw.usb.uvscom.debug: 0 hw.usb.ucom.cons_baud: 9600 hw.usb.ucom.cons_subunit: 0 hw.usb.ucom.cons_unit: -1 hw.usb.ucom.debug: 0 hw.usb.uhid.debug: 0 hw.usb.umodem.debug: 0 hw.usb.u3g.debug: 0 0[upsmon1]# ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ From owner-freebsd-usb@FreeBSD.ORG Wed May 11 06:22:48 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 85020106566C for ; Wed, 11 May 2011 06:22:48 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe02.c2i.net [212.247.154.34]) by mx1.freebsd.org (Postfix) with ESMTP id F27BC8FC16 for ; Wed, 11 May 2011 06:22:47 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.1 cv=oR3+9dOmPeF3nZCt5Gxyvf/bIpfj8bfjGZkkfp/xES8= c=1 sm=1 a=SvYTsOw2Z4kA:10 a=2kf5TSms6lgA:10 a=WQU8e4WWZSUA:10 a=8nJEP1OIZ-IA:10 a=CL8lFSKtTFcA:10 a=i9M/sDlu2rpZ9XS819oYzg==:17 a=RwoVGHLvPicRPu-0EnMA:9 a=0K7Ao1CYtm3kSxvwJAcA:7 a=wPNLvfGTeEIA:10 a=sacPUS_WQIPYfBUw:21 a=lh4RMoUfLodpfo_i:21 a=i9M/sDlu2rpZ9XS819oYzg==:117 Received: from [188.126.198.129] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe02.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 125268267; Wed, 11 May 2011 08:22:45 +0200 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Wed, 11 May 2011 08:21:35 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.2-STABLE; KDE/4.4.5; amd64; ; ) References: <4DC9689F.60506@sentex.net> <4DC99B0A.5090301@sentex.net> In-Reply-To: <4DC99B0A.5090301@sentex.net> X-Face: *nPdTl_}RuAI6^PVpA02T?$%Xa^>@hE0uyUIoiha$pC:9TVgl.Oq, NwSZ4V"|LR.+tj}g5 %V,x^qOs~mnU3]Gn; cQLv&.N>TrxmSFf+p6(30a/{)KUU!s}w\IhQBj}[g}bj0I3^glmC( :AuzV9:.hESm-x4h240C`9=w MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201105110821.35744.hselasky@c2i.net> Cc: Subject: Re: usb errors on RELENG_8 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 11 May 2011 06:22:48 -0000 On Tuesday 10 May 2011 22:07:38 Mike Tancsa wrote: > On 5/10/2011 12:32 PM, Mike Tancsa wrote: > > I am trying to monitor a boat load of UPSes off a soekris 5501 (same > > error on an Alix box) and a pair of USB hubs. It seems I can only have > > one USB hub plug in at a time. If I plug just one in, all is ok. But if > > two are plugged in, I get a stream of errors like this. Is this some > > sort of device or driver limitation ? > > > > ugen1.11: at usbus1 (disconnected) > > Some other odd things. If we plug in a new UPS to the hub, it fails > > usbd_setup_device_desc: getting device descriptor at addr 13 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_TIMEOUT, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 13 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=13, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 13 failed, > USB_ERR_STALLED > ugen1.13: at usbus1 (disconnected) > > > but, if we plug it in, then reboot the box, it seems to work. > > 0[upsmon1]# usbconfig > ugen0.1: at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE > ugen1.1: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE > ugen1.2: at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE > ugen1.3: > at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.4: > at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.5: > at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.6: at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE > ugen1.7: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.8: > at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.9: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.10: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.11: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.12: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen1.13: Conversion> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > 0[upsmon1]# > > > Also, I noticed at bootup time, I get the following error consistently > > uhub1: 4 ports with 4 removable, self powered > Root mount waiting for: usbus1 > ugen1.2: at usbus1 > uhub2: on > usbus1 > uhub2: 4 ports with 4 removable, self powered > Root mount waiting for: usbus1 > ugen1.3: at usbus1 > Root mount waiting for: usbus1 > ugen1.4: at usbus1 > Root mount waiting for: usbus1 > ugen1.5: at usbus1 > Root mount waiting for: usbus1 > ugen1.6: at usbus1 > uhub3: > on usbus1 > Root mount waiting for: usbus1 > uhub3: 7 ports with 7 removable, self powered > Root mount waiting for: usbus1 > Root mount waiting for: usbus1 > usb_alloc_device: set address 7 failed (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 7 failed, > USB_ERR_STALLED > Root mount waiting for: usbus1 > usbd_req_re_enumerate: addr=7, set address failed! (USB_ERR_TIMEOUT, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 7 failed, > USB_ERR_STALLED > Root mount waiting for: usbus1 > ugen1.7: at usbus1 > Root mount waiting for: usbus1 > ugen1.8: at usbus1 > Root mount waiting for: usbus1 > ugen1.9: at usbus1 > ugen1.10: at usbus1 > Root mount waiting for: usbus1 > ugen1.11: at usbus1 > Root mount waiting for: usbus1 > ugen1.12: at usbus1 > Root mount waiting for: usbus1 > ugen1.13: at usbus1 > Trying to mount root from ufs:/dev/ad0s1a > > The error seems to follow the first port of the second HUB that is > plugged in. > > Also, unplugging and replugging a device gives > > ugen1.3: at usbus1 (disconnected) > usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > ugen1.3: at usbus1 (disconnected) > uhub_reattach_port: could not allocate new device > uhub_reattach_port: giving up port reset - device vanished > usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > ugen1.3: at usbus1 (disconnected) > uhub_reattach_port: could not allocate new device > ugen1.7: at usbus1 (disconnected) > usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > ugen1.3: at usbus1 > Try to send this USB control request to the HUB and then re-plug the device. Does it help? usbconfig -d X.Y do_request 0x23 0x09 0x0000 0x0001 0 --HPS From owner-freebsd-usb@FreeBSD.ORG Wed May 11 16:11:02 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B73981065674 for ; Wed, 11 May 2011 16:11:02 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1-6.sentex.ca [IPv6:2607:f3e0:0:1::12]) by mx1.freebsd.org (Postfix) with ESMTP id 702D38FC0C for ; Wed, 11 May 2011 16:11:02 +0000 (UTC) Received: from smtp2.sentex.ca (smtp2c.sentex.ca [64.7.153.30]) by smarthost1.sentex.ca (8.14.4/8.14.4) with ESMTP id p4BGAsHt064790 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 11 May 2011 12:10:54 -0400 (EDT) (envelope-from mike@sentex.net) Received: from pyroxene.sentex.ca ([IPv6:2607:f3e0:0:3::18]) by smtp2.sentex.ca (8.14.4/8.14.4) with ESMTP id p4BGAsH7088143; Wed, 11 May 2011 12:10:54 -0400 (EDT) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (saphire3.sentex.net [192.168.43.26]) by pyroxene.sentex.ca (8.14.4/8.14.3) with ESMTP id p4BGAsK9062043; Wed, 11 May 2011 12:10:54 -0400 (EDT) (envelope-from mike@sentex.net) Message-ID: <4DCAB511.4060900@sentex.net> Date: Wed, 11 May 2011 12:10:57 -0400 From: Mike Tancsa Organization: Sentex Communications User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.13) Gecko/20101207 Thunderbird/3.1.7 MIME-Version: 1.0 To: Hans Petter Selasky References: <4DC9689F.60506@sentex.net> <4DC99B0A.5090301@sentex.net> <201105110821.35744.hselasky@c2i.net> In-Reply-To: <201105110821.35744.hselasky@c2i.net> X-Enigmail-Version: 1.1.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Virus-Scanned: clamav-milter 0.95.1 at smtp2.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.67 on 64.7.153.18 Cc: freebsd-usb@freebsd.org Subject: Re: usb errors on RELENG_8 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 11 May 2011 16:11:02 -0000 On 5/11/2011 2:21 AM, Hans Petter Selasky wrote: > Try to send this USB control request to the HUB and then re-plug the device. > Does it help? > > usbconfig -d X.Y do_request 0x23 0x09 0x0000 0x0001 0 Hi, I get this command 0[upsmon1]# usbconfig -d 1.8 do_request 0x23 0x09 0x0000 0x0001 0 REQUEST = 0[upsmon1]# It seems to quiet things down. What does the command do ? ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ From owner-freebsd-usb@FreeBSD.ORG Wed May 11 16:25:53 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DFAB7106564A for ; Wed, 11 May 2011 16:25:53 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id 6CE218FC13 for ; Wed, 11 May 2011 16:25:52 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.1 cv=0KkIQGagYCvnrzE3Z2Lmid87OPdbX6VLcZYwAuLMZ50= c=1 sm=1 a=SvYTsOw2Z4kA:10 a=2kf5TSms6lgA:10 a=WQU8e4WWZSUA:10 a=8nJEP1OIZ-IA:10 a=CL8lFSKtTFcA:10 a=i9M/sDlu2rpZ9XS819oYzg==:17 a=8xRRQk4AJjHggb4ar6oA:9 a=wPNLvfGTeEIA:10 a=i9M/sDlu2rpZ9XS819oYzg==:117 Received: from [188.126.198.129] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 125653763; Wed, 11 May 2011 18:25:51 +0200 From: Hans Petter Selasky To: Mike Tancsa Date: Wed, 11 May 2011 18:24:39 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.2-STABLE; KDE/4.4.5; amd64; ; ) References: <4DC9689F.60506@sentex.net> <201105110821.35744.hselasky@c2i.net> <4DCAB511.4060900@sentex.net> In-Reply-To: <4DCAB511.4060900@sentex.net> X-Face: *nPdTl_}RuAI6^PVpA02T?$%Xa^>@hE0uyUIoiha$pC:9TVgl.Oq, NwSZ4V"|LR.+tj}g5 %V,x^qOs~mnU3]Gn; cQLv&.N>TrxmSFf+p6(30a/{)KUU!s}w\IhQBj}[g}bj0I3^glmC( :AuzV9:.hESm-x4h240C`9=w MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201105111824.39631.hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: usb errors on RELENG_8 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 11 May 2011 16:25:54 -0000 On Wednesday 11 May 2011 18:10:57 Mike Tancsa wrote: > On 5/11/2011 2:21 AM, Hans Petter Selasky wrote: > > Try to send this USB control request to the HUB and then re-plug the > > device. Does it help? > > > > usbconfig -d X.Y do_request 0x23 0x09 0x0000 0x0001 0 > > Hi, > I get this command > > 0[upsmon1]# usbconfig -d 1.8 do_request 0x23 0x09 0x0000 0x0001 0 > REQUEST = > 0[upsmon1]# > > It seems to quiet things down. What does the command do ? > > ---Mike Hi, It resets the transaction translator of the high speed HUB. Probably we could issue that command before or after resetting the USB port. --HPS From owner-freebsd-usb@FreeBSD.ORG Wed May 11 21:22:09 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BEE281065670 for ; Wed, 11 May 2011 21:22:09 +0000 (UTC) (envelope-from kc5vdj.freebsd@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 8851E8FC13 for ; Wed, 11 May 2011 21:22:09 +0000 (UTC) Received: by iyj12 with SMTP id 12so984398iyj.13 for ; Wed, 11 May 2011 14:22:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:message-id:date:from:user-agent:mime-version:to :subject:content-type:content-transfer-encoding; bh=xG9lJ5YFOaeyE0d0fatudqvdJLWBRuqkxPAF2B3e+Fg=; b=dxB+aNkOx0vj6YodlFqPpaxS1kU2J+j1kVs2Xn0Vv20irrLARx8p9ljXT+5zF1tnqA f6y4ch921DAxsrIfK/2+gBmePMDUmw/p43eTZ5fnLqZayA8IBplS66A78zKu+7rsLbag vChMRlqFRry/mhcJebhKGFvqOhdzY9dzaZ6IY= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject :content-type:content-transfer-encoding; b=uDFUJ/PPNdF4ZNdJtjL0NdO2xj2+FmtMXcSvycBIAEy2pqh/+ponjXpfKSrZQtW1s4 DTCxPB8JVK7mzawZ7RP8boyYcLukwhNpiKSu/CiFfP23RJTlJieBuBJEN8fMvwC+Sg/G sgqc2nIdcQTmulGqy2rvX2cdyg5R63Q+wCjf8= Received: by 10.42.145.65 with SMTP id e1mr3521193icv.145.1305147490632; Wed, 11 May 2011 13:58:10 -0700 (PDT) Received: from argus.electron-tube.net (desm-44-169.dsl.netins.net [167.142.44.169]) by mx.google.com with ESMTPS id g16sm174473ibb.37.2011.05.11.13.58.01 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 11 May 2011 13:58:10 -0700 (PDT) Message-ID: <4DCAF83C.3010501@gmail.com> Date: Wed, 11 May 2011 15:57:32 -0500 From: Jim Bryant User-Agent: Thunderbird 2.0.0.24 (X11/20100911) MIME-Version: 1.0 To: freebsd-usb@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: request for usbdevs additions X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 11 May 2011 21:22:09 -0000 Can someone please add the following entries to usbdevs? vendor SOUNDGRAPH 0x15C2 Soundgraph, Inc. product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris Elite VFD Panel and Remote product SOUNDGRAPH SILVERSTONE_LC16 0xFFDC Silverstone LC16 VFD Panel and Remote Also, is there any documentation for usbdi(9) than the source code itself ???????????? Thank you, Jim, KC5VDJ From owner-freebsd-usb@FreeBSD.ORG Thu May 12 04:30:16 2011 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 560DE106566B for ; Thu, 12 May 2011 04:30:16 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 2D2148FC08 for ; Thu, 12 May 2011 04:30:16 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p4C4UFe8034387 for ; Thu, 12 May 2011 04:30:15 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p4C4UFno034382; Thu, 12 May 2011 04:30:15 GMT (envelope-from gnats) Date: Thu, 12 May 2011 04:30:15 GMT Message-Id: <201105120430.p4C4UFno034382@freefall.freebsd.org> To: freebsd-usb@FreeBSD.org From: "Eugene M. Zheganin" Cc: Subject: Re: usb/133989: [usb8] [ukbd] USB keyboard dead at mountroot> prompt X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: "Eugene M. Zheganin" List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 12 May 2011 04:30:16 -0000 The following reply was made to PR usb/133989; it has been noted by GNATS. From: "Eugene M. Zheganin" To: bug-followup@FreeBSD.org, emikulic@gmail.com Cc: Subject: Re: usb/133989: [usb8] [ukbd] USB keyboard dead at mountroot> prompt Date: Thu, 12 May 2011 10:27:27 +0600 8.2-RELEASE. still there. furthermore, the number of usb-only server platform is increasing. From owner-freebsd-usb@FreeBSD.ORG Thu May 12 07:12:15 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B0511106564A for ; Thu, 12 May 2011 07:12:15 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id 419ED8FC0C for ; Thu, 12 May 2011 07:12:15 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.1 cv=0KkIQGagYCvnrzE3Z2Lmid87OPdbX6VLcZYwAuLMZ50= c=1 sm=1 a=SvYTsOw2Z4kA:10 a=WQU8e4WWZSUA:10 a=8nJEP1OIZ-IA:10 a=CL8lFSKtTFcA:10 a=i9M/sDlu2rpZ9XS819oYzg==:17 a=dF4OoHsbd9TSMqSvdW0A:9 a=wPNLvfGTeEIA:10 a=i9M/sDlu2rpZ9XS819oYzg==:117 Received: from [188.126.198.129] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 125865644; Thu, 12 May 2011 09:12:13 +0200 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Thu, 12 May 2011 09:11:03 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.2-STABLE; KDE/4.4.5; amd64; ; ) References: <4DCAF83C.3010501@gmail.com> In-Reply-To: <4DCAF83C.3010501@gmail.com> X-Face: *nPdTl_}RuAI6^PVpA02T?$%Xa^>@hE0uyUIoiha$pC:9TVgl.Oq, NwSZ4V"|LR.+tj}g5 %V,x^qOs~mnU3]Gn; cQLv&.N>TrxmSFf+p6(30a/{)KUU!s}w\IhQBj}[g}bj0I3^glmC( :AuzV9:.hESm-x4h240C`9=w MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201105120911.03529.hselasky@c2i.net> Cc: Subject: Re: request for usbdevs additions X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 12 May 2011 07:12:15 -0000 On Wednesday 11 May 2011 22:57:32 Jim Bryant wrote: > Can someone please add the following entries to usbdevs? > > vendor SOUNDGRAPH 0x15C2 Soundgraph, Inc. > > product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris > Elite VFD Panel and Remote > product SOUNDGRAPH SILVERSTONE_LC16 0xFFDC Silverstone LC16 VFD > Panel and Remote > > Also, is there any documentation for usbdi(9) than the source code > itself ???????????? No. Maybe something on youtube, if you search for FreeBSD USB. Can you format the addition like a patch to usbdevs? The entries should be inserted at the correct numerical and alphabetical location. --HPS From owner-freebsd-usb@FreeBSD.ORG Thu May 12 20:16:26 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 032221065670 for ; Thu, 12 May 2011 20:16:26 +0000 (UTC) (envelope-from kc5vdj.freebsd@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id B894C8FC16 for ; Thu, 12 May 2011 20:16:25 +0000 (UTC) Received: by iyj12 with SMTP id 12so2166674iyj.13 for ; Thu, 12 May 2011 13:16:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:message-id:date:from:user-agent:mime-version:to :cc:subject:references:in-reply-to:content-type; bh=/n/rM0mCaxA6qlTtiJL9z8Zt0q0mwv9kXzCj7JTX8JA=; b=Rw5x5tPM1fWTuu+h1H/FTjCDjiqjpYXtEv3taSXTzDVPJPnZmBADzMOl8h/Nup+7EI +6XLzki2PhF1zQTLQl10PupSmNPzENcXGEQkKS1Fx5f2Kp9aOwrfj0A2rcnAI1c8WUF8 FFhTWjeNJ57NsFLcKZIp/pp2vEpD+cwVBSBnQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type; b=WJX08KzleYhpCWa7uLlcmKJPnpoZHuj7h2xee6R4tiqMUYbrUGOdLIDqGRG4m2AaU2 2ufluNh3ELOVSQZfQzJgxutw4KZCz4vdr1p7kSFbc2tTHhSYHMDh9Q9v8VeggEmAmCMk +JdYNmjH3R89EbczcbCl74bvMYiGiXB7japHg= Received: by 10.42.177.197 with SMTP id bj5mr893635icb.64.1305231385198; Thu, 12 May 2011 13:16:25 -0700 (PDT) Received: from argus.electron-tube.net (desm-44-169.dsl.netins.net [167.142.44.169]) by mx.google.com with ESMTPS id gy41sm622052ibb.56.2011.05.12.13.16.18 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 12 May 2011 13:16:24 -0700 (PDT) Message-ID: <4DCC3FF3.1090808@gmail.com> Date: Thu, 12 May 2011 15:15:47 -0500 From: Jim Bryant User-Agent: Thunderbird 2.0.0.24 (X11/20100911) MIME-Version: 1.0 To: Hans Petter Selasky References: <4DCAF83C.3010501@gmail.com> <201105120911.03529.hselasky@c2i.net> In-Reply-To: <201105120911.03529.hselasky@c2i.net> Content-Type: multipart/mixed; boundary="------------090804060305020705070309" Cc: freebsd-usb@freebsd.org Subject: Re: request for usbdevs additions X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 12 May 2011 20:16:26 -0000 This is a multi-part message in MIME format. --------------090804060305020705070309 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit thanks, I shall take a look at youtube when I can. The context diff patch is attached, cwd for the patch should be /usr/src. Hans Petter Selasky wrote: > On Wednesday 11 May 2011 22:57:32 Jim Bryant wrote: > >> Can someone please add the following entries to usbdevs? >> >> vendor SOUNDGRAPH 0x15C2 Soundgraph, Inc. >> >> product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris >> Elite VFD Panel and Remote >> product SOUNDGRAPH SILVERSTONE_LC16 0xFFDC Silverstone LC16 VFD >> Panel and Remote >> >> Also, is there any documentation for usbdi(9) than the source code >> itself ???????????? >> > > No. Maybe something on youtube, if you search for FreeBSD USB. > > Can you format the addition like a patch to usbdevs? The entries should be > inserted at the correct numerical and alphabetical location. > > --HPS > > --------------090804060305020705070309 Content-Type: text/plain; name="usbdevs.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="usbdevs.patch" *** sys/dev/usb/usbdevs.backup Thu May 12 15:03:01 2011 --- sys/dev/usb/usbdevs Thu May 12 15:06:36 2011 *************** *** 626,631 **** --- 626,632 ---- vendor UMEDIA 0x157e U-MEDIA Communications vendor FIBERLINE 0x1582 Fiberline vendor SPARKLAN 0x15a9 SparkLAN + vendor SOUNDGRAPH 0x15c2 Soundgraph, Inc. vendor AMIT2 0x15c5 AMIT vendor SOHOWARE 0x15e8 SOHOware vendor UMAX 0x1606 UMAX Data Systems *************** *** 3108,3113 **** --- 3109,3118 ---- product SPARKLAN RT2870_1 0x0006 RT2870 product SPARKLAN RT3070 0x0010 RT3070 + /* Soundgraph products */ + product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris Elite VFD Panel, Knob, and Remote + product SOUNDGRAPH SSTONE_LC16 0xffdc Silverstone LC16 VFD Panel, Knob, and Remote + /* Speed Dragon Multimedia products */ product SPEEDDRAGON MS3303H 0x110b MS3303H Serial --------------090804060305020705070309-- From owner-freebsd-usb@FreeBSD.ORG Thu May 12 20:27:41 2011 Return-Path: Delivered-To: usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C80A210657BA for ; Thu, 12 May 2011 20:27:41 +0000 (UTC) (envelope-from jhs@berklix.com) Received: from tower.berklix.org (tower.berklix.org [83.236.223.114]) by mx1.freebsd.org (Postfix) with ESMTP id 6732B8FC0A for ; Thu, 12 May 2011 20:27:41 +0000 (UTC) Received: from park.js.berklix.net (pD9FBF716.dip.t-dialin.net [217.251.247.22]) (authenticated bits=0) by tower.berklix.org (8.14.2/8.14.2) with ESMTP id p4CJxKmh061437 for ; Thu, 12 May 2011 19:59:21 GMT (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41]) by park.js.berklix.net (8.13.8/8.13.8) with ESMTP id p4CJxFPs038955 for ; Thu, 12 May 2011 21:59:15 +0200 (CEST) (envelope-from jhs@berklix.com) Received: from fire.js.berklix.net (localhost [127.0.0.1]) by fire.js.berklix.net (8.14.3/8.14.3) with ESMTP id p4CJxADv098731 for ; Thu, 12 May 2011 21:59:15 +0200 (CEST) (envelope-from jhs@fire.js.berklix.net) Message-Id: <201105121959.p4CJxADv098731@fire.js.berklix.net> To: usb@freebsd.org From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com/~jhs/cv/ Date: Thu, 12 May 2011 21:59:10 +0200 Sender: jhs@berklix.com Cc: Subject: Does FreeBSD 8.2-RELEASE support combi printer + scanner ? X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 12 May 2011 20:27:42 -0000 Hi usb people, Does 8.2-RELEASE support combi printer + scanner ? Or do I need to install current to get my HP Deskjet 2050 combi scanner + printer to work ? Thanks for any clues. Forwarded from: "Julian Stacey" http://www.berklix.com/~jhs/ ------- Forwarded Message To: sane-devel@lists.alioth.debian.org cc: "m. allan noah" Subject: Re: [sane-devel] HP Deskjet 2050 special edition From: "Julian H. Stacey" Organization: http://www.berklix.com BSD Unix Linux Consultancy, Munich Germany User-agent: EXMH on FreeBSD http://www.berklix.com/free/ X-URL: http://www.berklix.com In-reply-to: Your message "Thu, 12 May 2011 02:47:53 +0200." <201105120047.p4C0lrei083904@fire.js.berklix.net> Date: Thu, 12 May 2011 21:54:50 +0200 Sender: jhs@fire.js.berklix.net Hi, I wrote: > > Hi Sane people, > > Is "HP Deskjet 2050 special edition" supported ? > > > > I've been trying on FreeBSD-8.2-RELEASE, with sane-backends-1.0.21_2 > > + guidance from > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/scanners.html > > > > I can see & use another scanner (Epson Perfection 1260) > > > > I've been doing some comparisons with both scanners alternately plugged in: > > > > grep ugen /var/log/messages > > ugen1.3: at usbus1 > > > > ugen1.3: at usbus1 > > > > su ; sane-find-scanner -q > > found USB scanner (vendor=0x04b8 [EPSON], product=0x011d > > [EPSON Scanner] , chip=LM9832/3) at libusb:/dev/usb:/dev/ugen1.3 > > > > found USB scanner (vendor=0x03f0 [HP], product=0x8711 > > [Deskjet 2050 J510 series]) at libusb:/dev/usb:/dev/ugen1.3 > > > > ls -l /dev/pass* > > crw------- 1 root operator 0, 141 May 11 19:07 /dev/pass0 > > crw------- 1 root operator 0, 121 May 3 15:50 /dev/pass0 > > > > su ; scanimage -L > > device `plustek:libusb:/dev/usb:/dev/ugen1.3' is a Epson > > Perfection 1260 /Photo flatbed scanner > > > > No scanners were identified. > > > > I've tried adding extra dummy lines in > > sane-backends-1.0.21/tools/hal/libsane.fdi > > sane-backends-1.0.21/tools/hotplug/libsane.usermap > > sane-backends-1.0.21/tools/udev/libsane.rules > > > > but no luck. > > > > PS Hplip claims to support it: > > http://hplipopensource.com/hplip-web/supported_devices/deskjet_aio.html > > http://hplipopensource.com/hplip-web/models/deskjet_aio/deskjet_2050_j510_series > > html > > > > Model Name = HP Deskjet 2050 j510 All-in-one Printer > > Min. HPLIP Version = 3.10.6 > > FreeBSD-8.2 installs print/hplip 3.11.1, > > FreeBSD-current installs 3.11.3 "m. allan noah" replied: > Do you have HPLIP installed? Yes as above HP page says 3.10.6 or newer required. I installed 3.11.1 then 3.11.3 My other Epson scanner is Just a scanner, & works. The HP is a combi scanner + printer. I'm just wondering if that might be a problem to FreeBSD-8.2-RELEASE, though I recognise that's not a valid question for this sane list, so I'll ask on an @FreeBSD.org list. Cheers, Julian - -- Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com Mail plain text; Not quoted-printable, Not HTML, Not base 64. Reply below text sections not at top, to avoid breaking cumulative context. ------- End of Forwarded Message From owner-freebsd-usb@FreeBSD.ORG Fri May 13 21:07:33 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AB5C8106566C for ; Fri, 13 May 2011 21:07:33 +0000 (UTC) (envelope-from kc5vdj.freebsd@gmail.com) Received: from mail-iw0-f182.google.com (mail-iw0-f182.google.com [209.85.214.182]) by mx1.freebsd.org (Postfix) with ESMTP id 6FAFC8FC19 for ; Fri, 13 May 2011 21:07:33 +0000 (UTC) Received: by iwn33 with SMTP id 33so3606157iwn.13 for ; Fri, 13 May 2011 14:07:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:message-id:date:from:user-agent:mime-version:to :cc:subject:references:in-reply-to:content-type :content-transfer-encoding; bh=9E4+JW4pbHZAMWsarOGxQyqeWXln1t4wv556hM3AL9g=; b=SdVqqruol26vs09dzp5T2iZkw1KfBhJ4LgP9bFjpkb4X9eFDiFyrCtML6On41AbK5x QBVShdR/c4TC9qPpOu8DnPj0KIskDFEpqZqC5uuniwLgO5J5oDzQrap0Cye2/RlsN9cW EqM9daa6Y8IHc0pDIcKWl4/XH0tsq48n3CD2w= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type:content-transfer-encoding; b=fkDPy0Olk99FVPHfFt4pANBpcoQZAsjq1GX+J9tW9mdwMzY8GMtZksD42pXyqcYNNB EyyrUaI9iR7LIdUGywC8ChLr9SEnOV1XmFIu1wCYam2KdOKDObAP4VvMGZxf40e2oFSn eXvp5l9HX1Xv0zTlRCIqlppNLIBT91aU8fCaw= Received: by 10.42.148.194 with SMTP id s2mr2489417icv.126.1305320853032; Fri, 13 May 2011 14:07:33 -0700 (PDT) Received: from argus.electron-tube.net (desm-44-169.dsl.netins.net [167.142.44.169]) by mx.google.com with ESMTPS id hc41sm1087727ibb.47.2011.05.13.14.07.31 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 13 May 2011 14:07:32 -0700 (PDT) Message-ID: <4DCD9D92.3020801@gmail.com> Date: Fri, 13 May 2011 16:07:30 -0500 From: Jim Bryant User-Agent: Thunderbird 2.0.0.24 (X11/20100911) MIME-Version: 1.0 To: Hans Petter Selasky References: <4DCAF83C.3010501@gmail.com> <201105120911.03529.hselasky@c2i.net> <4DCC3FF3.1090808@gmail.com> In-Reply-To: <4DCC3FF3.1090808@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: request for usbdevs additions X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 13 May 2011 21:07:33 -0000 in case i'm having difficulty with attachments because of gmail. i'm inlining it this time.. the patch should be applied from /usr/src or / (assuming the sys symlink is there) *** sys/dev/usb/usbdevs.backup Thu May 12 15:03:01 2011 --- sys/dev/usb/usbdevs Thu May 12 15:06:36 2011 *************** *** 626,631 **** --- 626,632 ---- vendor UMEDIA 0x157e U-MEDIA Communications vendor FIBERLINE 0x1582 Fiberline vendor SPARKLAN 0x15a9 SparkLAN + vendor SOUNDGRAPH 0x15c2 Soundgraph, Inc. vendor AMIT2 0x15c5 AMIT vendor SOHOWARE 0x15e8 SOHOware vendor UMAX 0x1606 UMAX Data Systems *************** *** 3108,3113 **** --- 3109,3118 ---- product SPARKLAN RT2870_1 0x0006 RT2870 product SPARKLAN RT3070 0x0010 RT3070 + /* Soundgraph products */ + product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris Elite VFD Panel, Knob, and Remote + product SOUNDGRAPH SSTONE_LC16 0xffdc Silverstone LC16 VFD Panel, Knob, and Remote + /* Speed Dragon Multimedia products */ product SPEEDDRAGON MS3303H 0x110b MS3303H Serial Jim Bryant wrote: > thanks, I shall take a look at youtube when I can. > > The context diff patch is attached, cwd for the patch should be /usr/src. > > Hans Petter Selasky wrote: >> On Wednesday 11 May 2011 22:57:32 Jim Bryant wrote: >> >>> Can someone please add the following entries to usbdevs? >>> >>> vendor SOUNDGRAPH 0x15C2 Soundgraph, Inc. >>> >>> product SOUNDGRAPH IMON_VFD 0x0044 Antec Veris >>> Elite VFD Panel and Remote >>> product SOUNDGRAPH SILVERSTONE_LC16 0xFFDC Silverstone LC16 VFD >>> Panel and Remote >>> >>> Also, is there any documentation for usbdi(9) than the source code >>> itself ???????????? >>> >> >> No. Maybe something on youtube, if you search for FreeBSD USB. >> >> Can you format the addition like a patch to usbdevs? The entries >> should be inserted at the correct numerical and alphabetical location. >> >> --HPS >> >> From owner-freebsd-usb@FreeBSD.ORG Sat May 14 12:18:20 2011 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5C3C81065670 for ; Sat, 14 May 2011 12:18:20 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id D38CF8FC19 for ; Sat, 14 May 2011 12:18:19 +0000 (UTC) X-Cloudmark-Score: 0.000000 [] X-Cloudmark-Analysis: v=1.1 cv=0KkIQGagYCvnrzE3Z2Lmid87OPdbX6VLcZYwAuLMZ50= c=1 sm=1 a=SvYTsOw2Z4kA:10 a=WQU8e4WWZSUA:10 a=Q9fys5e9bTEA:10 a=CL8lFSKtTFcA:10 a=i9M/sDlu2rpZ9XS819oYzg==:17 a=6I5d2MoRAAAA:8 a=GVLM966cp-B9s_uwC6MA:9 a=PUjeQqilurYA:10 a=i9M/sDlu2rpZ9XS819oYzg==:117 Received: from [188.126.198.129] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.2.19) with ESMTPA id 126897437; Sat, 14 May 2011 14:18:16 +0200 From: Hans Petter Selasky To: Jim Bryant Date: Sat, 14 May 2011 14:17:04 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.2-STABLE; KDE/4.4.5; amd64; ; ) References: <4DCAF83C.3010501@gmail.com> <201105120911.03529.hselasky@c2i.net> <4DCC3FF3.1090808@gmail.com> In-Reply-To: <4DCC3FF3.1090808@gmail.com> X-Face: *nPdTl_}RuAI6^PVpA02T?$%Xa^>@hE0uyUIoiha$pC:9TVgl.Oq, NwSZ4V"|LR.+tj}g5 %V,x^qOs~mnU3]Gn; cQLv&.N>TrxmSFf+p6(30a/{)KUU!s}w\IhQBj}[g}bj0I3^glmC( :AuzV9:.hESm-x4h240C`9=w MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <201105141417.04963.hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: request for usbdevs additions X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 14 May 2011 12:18:20 -0000 On Thursday 12 May 2011 22:15:47 Jim Bryant wrote: > thanks, I shall take a look at youtube when I can. > > The context diff patch is attached, cwd for the patch should be /usr/src. > http://svn.freebsd.org/changeset/base/221883 --HPS