From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 11:07:24 2012 Return-Path: Delivered-To: freebsd-usb@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C6AB910656A7 for ; Mon, 9 Apr 2012 11:07:24 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id AF90F8FC12 for ; Mon, 9 Apr 2012 11:07:24 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q39B7OEB039772 for ; Mon, 9 Apr 2012 11:07:24 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q39B7OT9039770 for freebsd-usb@FreeBSD.org; Mon, 9 Apr 2012 11:07:24 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 9 Apr 2012 11:07:24 GMT Message-Id: <201204091107.q39B7OT9039770@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-usb@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-usb@FreeBSD.org X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 11:07:24 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o usb/165815 usb add k3772z 3g modem support o usb/165163 usb [keyboard] The USB RF keyboard and mouse become non-re o usb/164058 usb Lexar 8GB USB flash drive doesn't work by default o usb/163328 usb [usb] Support for Atheros USB abgn devices o kern/163091 usb [panic] Fatal trap 12: page fault while in kernel mode o usb/162306 usb usb devices cant get address asignation, no memories, o usb/162054 usb usbdump just hangs on 9.0-RC1 f usb/161793 usb poor EHCI usb2 i/o performance o usb/160436 usb ucom wedges machine on parity error ? o usb/160299 usb MicroSDHC-to-USB adapters do not work in FreeBSD 8.x o usb/160192 usb [install] Installation from USB-Stick doesn't find the o usb/159274 usb USB 3.0 Etron EJ168A does not work. f usb/159191 usb [fusefs-ntfs] write on fusefs-ntfs mounted partition r o usb/157376 usb LaCie USB disk not recognized o usb/157074 usb [boot] [usb8] vfs_mountroot_ask is called when no usb o usb/156898 usb [keyboard] usb keyboard does not work while boot (ps2 f usb/156735 usb Need Quirk for Goflex USB Disk Drives o usb/156725 usb USB stack stall cause complete system input loss o usb/156596 usb [ehci] Extremely high interrupt rate on ehci/uhci IRQ1 o usb/156000 usb rum(4) Fatal trap 18: integer divide fault while in ke f usb/155996 usb NanoBSD not booted as Disk o usb/155784 usb Problem with Transcend StoreJet 25M3 (2AJ1) on Asus M2 o usb/154506 usb [umass] Copying dir with large files makes FreeBSD loa o usb/154192 usb [umass] In Garmin Oregon GPS, only the first umass dev o i386/153851 usb [keyboard] keyboard issues on new Intel Mother boards. o usb/153703 usb [keyboard] My USB keyboard can not be used in 8-STABLE o usb/153609 usb [zyd] [panic] kernel: Fatal trap 12: page fault while o usb/153149 usb [umass] USB stick quirk regression [regression] o usb/152075 usb [usb8] [ehci] [request] Add quirk for CS5536 USB o usb/150892 usb [zyd] Whenever network contacted in any shape, way or o usb/150189 usb [run] [usb8] [patch] if_run appears to corrupt IP traf p usb/149764 usb [u3g] [patch] usbdevs update: Huawei K3765 3G modem o usb/149283 usb [uftdi] avrdude unable to talk to Arduino board (via u o usb/149162 usb [ural] ASUS WL-167g doesn't work in 8.1 (continue of 1 s usb/148702 usb [usb8] [request] IO DATA USB-RSAQ5 support on FreeBSD- o usb/148080 usb usbconfig(8) sometimes does not turn off the device o usb/147516 usb [umass] [usb67] kernel unable to deal with Olympus USB o i386/147475 usb [install] FreeBSD 8.x does not install on ASUS K8N4-E o usb/146840 usb [hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup after e o usb/146153 usb [axe] [usb8] Hosts in network doesn't receive any pack f usb/146054 usb [urtw] [usb8] urtw driver potentially out of date f usb/145513 usb [usb8] New USB stack: no new devices after forced usb p usb/145455 usb [usb8] [patch] USB debug support cannot be disabled o usb/145415 usb [umass] [usb8] USB card reader does not create slices a usb/145184 usb GENERIC can't mount root from USB on Asus EEE o usb/145165 usb [keyboard] [usb8] ukbd_set_leds_callback: error=USB_ER f kern/144938 usb [keyboard] [boot] Boot Failure with Apple (MB869LL/A) o usb/144387 usb [run] [panic] if_run panic o usb/144043 usb [umass] [usb8] USB DLT tape drive throws random errors a usb/143790 usb [boot] [cam] can not boot from usb hdd f usb/143620 usb [cdce] [usb8] the module if_cdce doesn't support my Op f usb/143294 usb [usb8] copying process stops at some time (10 - 50 sec o usb/143286 usb [ukbd] [usb8] [boot] boot failures on RELENG_8 system p usb/143186 usb [usbdevs] [usb8] [patch] add USB device IDs for Google a usb/143139 usb [umass] [usb8] [patch] Quirk for Century EX35SW4_SB4 J p usb/143045 usb [umass] [usb8] [patch] mounting Fujitsu 2600Z camera d o usb/142991 usb [uftdi] [usb67] [patch] Patch to add Crystalfontz 533 f usb/142989 usb [usb8] canon eos 50D attaches but detaches after few s f usb/142957 usb [umass] [usb8] [patch] patch for USB disk SYNCHRONIZE o usb/142719 usb [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fa o usb/142713 usb [usb67] [panic] Kernel Panik when connecting an IPhone f usb/142276 usb [umass] [usb8] Cache Synchronization Error with Olympu o usb/142229 usb [ums] [usb8] [hang] connecting a USB mouse to a Dell P f usb/141680 usb [uath] [usb8] Netgear WG111T not working with uath dri o usb/141664 usb [pcm] [usb8] Logitech USB microphone failure [regressi o usb/141474 usb [boot] [usb8] FreeBSD 8.0 can not install from USB CDR o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER o kern/141011 usb [usb8] Encrypted root, geli password at boot; enter ke o usb/140920 usb [install] [usb8] USB based install fails on 8.0-RELEAS o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0- a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A s usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit o usb/138124 usb [snd_uaudio] [usb8] Axed uaudio functionality in the u o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is f usb/137872 usb [usb67] [boot] slow booting on usb flash drive o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no o usb/137377 usb [usb8] request support for Huawei E180 o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro f usb/137190 usb [usb8][patch] inhibit spurious button releases for som o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo p usb/137188 usb [usb8][patch] correctly handle USB report descriptors o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa o usb/135206 usb machine reboots when inserted USB device f usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g o usb/134193 usb System freeze on usb MP3 player insertion o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive o usb/133989 usb [usb8] [ukbd] USB keyboard dead at mountroot> prompt o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache o usb/133296 usb [rum] driver not working properly in hostap mode o usb/132594 usb USB subsystem causes page fault and crashes o usb/132080 usb [patch] [usb] [rum] [panic] Kernel panic after NOMEM c o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760 o usb/132036 usb [panic] page fault when connecting Olympus C740 camera o usb/131583 usb [umass] Failure when detaching umass Device o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data o usb/131521 usb Registering Belkin UPS to usb_quirks.c o usb/131074 usb no run-time detection of usb devices plugged into exte o usb/130736 usb Page fault unplugging USB stick o usb/130230 usb [patch] [quirk] [usb67] [usb] [cam] [umass] Samsung El o usb/130208 usb Boot process severely hampered by umass0 error o usb/130122 usb [usb8] DVD drive detects as 'da' device f usb/129766 usb [usb] [panic] plugging in usb modem HUAWEI E226 panics o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis o usb/129311 usb [usb] [panic] Instant crash with an USB card reader s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa o usb/128977 usb [usb67] [patch] uaudio is not full duplex p usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2 o usb/128485 usb [umodem] [patch] Nokia N80 modem support o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like o usb/127926 usb [boot] USB Timeout during bootup s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support o usb/127248 usb [ucom] panic while uplcom devices attach and detach o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c o usb/126848 usb [usb]: USB Keyboard hangs during Installation o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be o usb/126519 usb [usb] [panic] panic when plugging in an iphone o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d f usb/125450 usb [panic] Removing USB flash card while being accessed c o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe o usb/124758 usb [rum] [panic] rum panics SMP kernel o usb/124708 usb [panic] Kernel panic on USB KVM reattach o kern/124130 usb [usb] gmirror fails to start usb devices that were pre o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with o usb/123691 usb usbd(8): usbd hangs o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa s usb/122819 usb [usb67] [patch] Patch to provide dynamic additions to o usb/122813 usb [udbp] [request] udbp driver should be removed in favo o usb/122547 usb [ehci] USB Printer not being recognized after reboot o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE o usb/122119 usb [umass] umass device causes creation of daX but not da o usb/121734 usb [ugen] ugen HP1022 printer device not working since up o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s o usb/121169 usb [umass] Issues with usb mp3 player o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS f usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det o usb/120729 usb [panic] fault while in kernel mode with connecting USB o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression] o usb/119509 usb [usb] USB flaky on Dell Optiplex 755 o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work o usb/117893 usb [umass] Lacie USB DVD writing failing o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory o usb/117598 usb [snd_uaudio] [patch] Not possible to record with Plant o usb/117313 usb [umass] [panic] panic on usb camera insertion o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a p usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300 o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco o usb/114682 usb [umass] generic USB media-card reader unusable o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff s usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar o kern/99200 usb [usb67] SMP-Kernel crashes reliably when Bluetooth con o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3 o usb/97472 usb [cam] [patch] add support for Olympus C150,D390 s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2. o usb/97175 usb [umass] [hang] USB cardreader hangs system o usb/96457 usb [umass] [panic] fatback on umass = reboot o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync s usb/96120 usb [ums] [request] USB mouse not always detected s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620 o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb o usb/95037 usb [umass] USB disk not recognized on hot-plug. o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI o usb/94384 usb [panic] kernel panic with usb2 hardware o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work o usb/92852 usb [ums] [patch] Vertical scroll not working properly on o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg f usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return " o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500 o usb/91283 usb [boot] [regression] booting very slow with usb devices o usb/91238 usb [umass] USB tape unit fails to write a second tape fil o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas o usb/89954 usb [umass] [panic] USB Disk driver race condition? s usb/89003 usb [request] LaCie Firewire drive not properly supported o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg o usb/88408 usb [axe] axe0 read PHY failed o usb/87648 usb [mouse] Logitech USB-optical mouse problem. f usb/87224 usb [usb] Cannot mount USB Zip750 o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the o usb/86298 usb [mouse] Known good USB mouse won't work with correct s s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN o usb/83863 usb [ugen] Communication problem between opensc/openct via o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55. s usb/80777 usb [request] usb_rem_task() should wait for callback to c s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_ o usb/80774 usb [patch] have "usbd_find_desc" in line with the other " o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails f usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze o usb/79723 usb [usb] [request] prepare for high speed isochronous tra o usb/78984 usb [umass] [patch] Creative MUVO umass failure f usb/77294 usb [ucom] [panic] ucom + ulpcom panic o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device f usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0 s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for f usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace) f usb/74771 usb [umass] [hang] mounting write-protected umass device a s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1 o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports o usb/67301 usb [uftdi] [panic] RTS and system panic o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s s bin/57255 usb [patch] usbd(8) and multi-function devices s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2 s usb/51958 usb [urio] [patch] update for urio driver o usb/40948 usb [umass] [request] USB HP CDW8200 does not work o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem 292 problems total. From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 16:17:37 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B3492106564A for ; Mon, 9 Apr 2012 16:17:37 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe01.c2i.net [212.247.154.2]) by mx1.freebsd.org (Postfix) with ESMTP id 3B7288FC14 for ; Mon, 9 Apr 2012 16:17:37 +0000 (UTC) X-T2-Spam-Status: No, hits=-0.2 required=5.0 tests=ALL_TRUSTED, BAYES_50 Received: from [176.74.212.201] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe01.swip.net (CommuniGate Pro SMTP 5.4.4) with ESMTPA id 262846873; Mon, 09 Apr 2012 18:12:29 +0200 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Mon, 9 Apr 2012 18:11:16 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.3-PRERELEASE; KDE/4.4.5; amd64; ; ) References: <975552A94CBC0F4DA60ED7B36C949CBA03DB0C8BA5@shandy.Beer.Town> <975552A94CBC0F4DA60ED7B36C949CBA03DB0C8BB2@shandy.Beer.Town> In-Reply-To: <975552A94CBC0F4DA60ED7B36C949CBA03DB0C8BB2@shandy.Beer.Town> X-Face: 'mmZ:T{)),Oru^0c+/}w'`gU1$ubmG?lp!=R4Wy\ELYo2)@'UZ24N@d2+AyewRX}mAm; Yp |U[@, _z/([?1bCfM{_"B<.J>mICJCHAzzGHI{y7{%JVz%R~yJHIji`y>Y}k1C4TfysrsUI -%GU9V5]iUZF&nRn9mJ'?&>O MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201204091811.16428.hselasky@c2i.net> Cc: Subject: Re: Impact of changes made to umass.c at r232358 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 16:17:37 -0000 On Friday 06 April 2012 18:19:10 Terence Telkamp wrote: > One thing I forgot to mention is that I have a machine in the kernel > debugger after the panic, so I can capture more information if any would > be helpful. > > -----Original Message----- > From: owner-freebsd-usb@freebsd.org [mailto:owner-freebsd-usb@freebsd.org] > On Behalf Of Terence Telkamp Sent: Friday, April 06, 2012 11:17 AM > To: freebsd-usb@freebsd.org > Subject: Impact of changes made to umass.c at r232358 > > I am seeing a kernel panic in FreeBSD 8.1, which is reproduced after > physically attaching and detaching a USB device several times. The kernel > debugger shows that the panic happens in camisr where the cam_sim and its > associated mutex are clearly destroyed. sim->refcount is 0, sim->softc is > 1 (UMASS_GONE), and the sim->mtx is destroyed (mtx_lock = 6). > > This looks very similar to FreeBSD PR kern/153514, which is unfortunately > unresolved. > > http://www.freebsd.org/cgi/query-pr.cgi?pr=153514 > > > Is it possible that the changes made to umass.c at r232358 might fix this > issue? > Hi, I need to see the backtrace. The revision you mention fixes a detach panic issue. Current issues are happening inside CAM layer, and that is outside of USB. If you search this list for usbconfig and umass, you will find some e-mails describing how you can stress test umass attach/detach. --HPS From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 16:18:40 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B73F21065672 for ; Mon, 9 Apr 2012 16:18:40 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id 3E5E78FC0C for ; Mon, 9 Apr 2012 16:18:40 +0000 (UTC) X-T2-Spam-Status: No, hits=-1.0 required=5.0 tests=ALL_TRUSTED Received: from [176.74.212.201] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.4.4) with ESMTPA id 94512561; Mon, 09 Apr 2012 18:13:32 +0200 From: Hans Petter Selasky To: freebsd-usb@freebsd.org Date: Mon, 9 Apr 2012 18:12:19 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.3-PRERELEASE; KDE/4.4.5; amd64; ; ) References: In-Reply-To: X-Face: 'mmZ:T{)),Oru^0c+/}w'`gU1$ubmG?lp!=R4Wy\ELYo2)@'UZ24N@d2+AyewRX}mAm; Yp |U[@, _z/([?1bCfM{_"B<.J>mICJCHAzzGHI{y7{%JVz%R~yJHIji`y>Y}k1C4TfysrsUI -%GU9V5]iUZF&nRn9mJ'?&>O MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201204091812.19973.hselasky@c2i.net> Cc: Subject: Re: uhub_reattach_port: could not allocate new device X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 16:18:40 -0000 On Friday 06 April 2012 23:50:07 Xavier wrote: > Hi to all, > > I attach an external USB Drive into a connector on the side of the > computer ( not USB hub ). > > DMESG(8) only say: > > ugen4.8: at usbus4 (disconnected) > uhub_reattach_port: could not allocate new device > > I'm running FreeBSD 9.0-RELEASE > > Can somebody help me ? Hi, Is your drive self powered? Try also: sysctl hw.usb.ehci.no_hs=1 --HPS From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 18:00:34 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 41F101065674 for ; Mon, 9 Apr 2012 18:00:34 +0000 (UTC) (envelope-from denverh@comcast.net) Received: from qmta15.westchester.pa.mail.comcast.net (qmta15.westchester.pa.mail.comcast.net [76.96.59.228]) by mx1.freebsd.org (Postfix) with ESMTP id D7AD78FC12 for ; Mon, 9 Apr 2012 18:00:25 +0000 (UTC) Received: from omta14.westchester.pa.mail.comcast.net ([76.96.62.60]) by qmta15.westchester.pa.mail.comcast.net with comcast id vtwj1i0051HzFnQ5FtzKaz; Mon, 09 Apr 2012 17:59:19 +0000 Received: from [192.168.0.30] ([66.41.84.80]) by omta14.westchester.pa.mail.comcast.net with comcast id vtzJ1i0161jzK7m3atzKl8; Mon, 09 Apr 2012 17:59:19 +0000 Message-ID: <4F832375.8010201@comcast.net> Date: Mon, 09 Apr 2012 12:59:17 -0500 From: Denver Hull User-Agent: Mozilla/5.0 (X11; U; FreeBSD amd64; en-US; rv:1.9.1.19) Gecko/20110521 SeaMonkey/2.0.14 MIME-Version: 1.0 To: Hans Petter Selasky References: <4F6E0101.8020806@comcast.net> <201203251005.04485.hselasky@c2i.net> <4F74D22B.9010307@comcast.net> <201204012304.32240.hselasky@c2i.net> In-Reply-To: <201204012304.32240.hselasky@c2i.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 18:00:34 -0000 Hans Petter Selasky wrote: > On Thursday 29 March 2012 23:20:43 Denver Hull wrote: > >> Hans Petter Selasky wrote: >> >>> On Saturday 24 March 2012 18:14:41 Denver Hull wrote: >>> >>>> Hello, >>>> >>>> I discovered this when I saw an update to input-wacom at >>>> freshports.org. I've installed cuse4bsd, the new input-wacom, and the >>>> latest webcamd: >>>> cuse4bsd-kmod-0.1.23 >>>> input-wacom-40.0.11.1 >>>> webcamd-3.2.0.2 >>>> >>>> I believe I've followed all the instructions properly, and when I start >>>> webcamd, everything seems to be correct: >>>> Attached ugen1.2[0] to cuse unit 0 >>>> Creating /dev/input/event0 >>>> >>>> According to dmesg, ugen1.2 is the correct device (I have a Bamboo Pen): >>>> ugen1.2: at usbus1 >>>> >>>> The /dev/input/event0 node is indeed created. However, when I start X, >>>> I get the following: >>>> (EE) stylus: Wacom X driver can't grab event device (Bad address) >>>> (EE) eraser: Wacom X driver can't grab event device (Bad address) >>>> (EE) cursor: Wacom X driver can't grab event device (Bad address) >>>> (EE) pad: Wacom X driver can't grab event device (Bad address) >>>> (EE) touch: Wacom X driver can't grab event device (Bad address) >>>> Protocol not supported by server >>>> >>>> The last line repeats indefinitely, and X never finishes starting up. >>>> The system I'm trying this on is 8.3-PRERELEASE. I had tried this >>>> quickly a while ago on 8.2-STABLE with similar results. >>>> >>>> Does anyone have any ideas about what might be wrong? >>>> >>> Hi, >>> >>> I think the wacom has two interfaces. >>> >>> So you need to do two instances of webcamd, using -i 0 and -i 1 . >>> >>> Else search google for webcamd-3.4.0.1 >>> >>> --HPS >>> >> My Bamboo Pen is working fine now. I installed your latest version, >> webcamd-3.4.0.1, and that takes care of getting webcamd started >> properly. It's still necessary to make sure moused doesn't attach to >> the tablet. I'm not sure what the best way is to do that, but for now >> I've adjusted /etc/devd.conf so only the first ums device gets attached. >> >> Thanks Hans, this is great. I wish I had one or two other devices I >> could try. >> > Hi, > > To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS". > > --HPS > > I don't get anything with that command on my 8.2-STABLE system. Is that something that will work on 9 but not 8? Thanks, Denver From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 19:03:10 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id EC7761065672 for ; Mon, 9 Apr 2012 19:03:10 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id 738188FC1B for ; Mon, 9 Apr 2012 19:03:10 +0000 (UTC) X-T2-Spam-Status: No, hits=-0.2 required=5.0 tests=ALL_TRUSTED, BAYES_50 Received: from [176.74.212.201] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.4.4) with ESMTPA id 94549525; Mon, 09 Apr 2012 21:03:08 +0200 From: Hans Petter Selasky To: Denver Hull Date: Mon, 9 Apr 2012 21:01:53 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.3-PRERELEASE; KDE/4.4.5; amd64; ; ) References: <4F6E0101.8020806@comcast.net> <201204012304.32240.hselasky@c2i.net> <4F832375.8010201@comcast.net> In-Reply-To: <4F832375.8010201@comcast.net> X-Face: 'mmZ:T{)),Oru^0c+/}w'`gU1$ubmG?lp!=R4Wy\ELYo2)@'UZ24N@d2+AyewRX}mAm; Yp |U[@, _z/([?1bCfM{_"B<.J>mICJCHAzzGHI{y7{%JVz%R~yJHIji`y>Y}k1C4TfysrsUI -%GU9V5]iUZF&nRn9mJ'?&>O MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201204092101.53603.hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 19:03:11 -0000 On Monday 09 April 2012 19:59:17 Denver Hull wrote: > Hans Petter Selasky wrote: > > On Thursday 29 March 2012 23:20:43 Denver Hull wrote: > >> Hans Petter Selasky wrote: > >>> On Saturday 24 March 2012 18:14:41 Denver Hull wrote: > >>>> Hello, > >>>> > >>>> I discovered this when I saw an update to input-wacom at > >>>> freshports.org. I've installed cuse4bsd, the new input-wacom, and the > >>>> latest webcamd: > >>>> cuse4bsd-kmod-0.1.23 > >>>> input-wacom-40.0.11.1 > >>>> webcamd-3.2.0.2 > >>>> > >>>> I believe I've followed all the instructions properly, and when I > >>>> start webcamd, everything seems to be correct: > >>>> Attached ugen1.2[0] to cuse unit 0 > >>>> Creating /dev/input/event0 > >>>> > >>>> According to dmesg, ugen1.2 is the correct device (I have a Bamboo > >>>> Pen): ugen1.2: at usbus1 > >>>> > >>>> The /dev/input/event0 node is indeed created. However, when I start > >>>> X, I get the following: > >>>> (EE) stylus: Wacom X driver can't grab event device (Bad address) > >>>> (EE) eraser: Wacom X driver can't grab event device (Bad address) > >>>> (EE) cursor: Wacom X driver can't grab event device (Bad address) > >>>> (EE) pad: Wacom X driver can't grab event device (Bad address) > >>>> (EE) touch: Wacom X driver can't grab event device (Bad address) > >>>> Protocol not supported by server > >>>> > >>>> The last line repeats indefinitely, and X never finishes starting up. > >>>> The system I'm trying this on is 8.3-PRERELEASE. I had tried this > >>>> quickly a while ago on 8.2-STABLE with similar results. > >>>> > >>>> Does anyone have any ideas about what might be wrong? > >>> > >>> Hi, > >>> > >>> I think the wacom has two interfaces. > >>> > >>> So you need to do two instances of webcamd, using -i 0 and -i 1 . > >>> > >>> Else search google for webcamd-3.4.0.1 > >>> > >>> --HPS > >> > >> My Bamboo Pen is working fine now. I installed your latest version, > >> webcamd-3.4.0.1, and that takes care of getting webcamd started > >> properly. It's still necessary to make sure moused doesn't attach to > >> the tablet. I'm not sure what the best way is to do that, but for now > >> I've adjusted /etc/devd.conf so only the first ums device gets attached. > >> > >> Thanks Hans, this is great. I wish I had one or two other devices I > >> could try. > > > > Hi, > > > > To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS". > > > > --HPS > > I don't get anything with that command on my 8.2-STABLE system. Is that > something that will work on 9 but not 8? > Did you kldload usb_quirk ? --HPS From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 19:28:10 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 1234B106566B for ; Mon, 9 Apr 2012 19:28:10 +0000 (UTC) (envelope-from denverh@comcast.net) Received: from qmta06.westchester.pa.mail.comcast.net (qmta06.westchester.pa.mail.comcast.net [76.96.62.56]) by mx1.freebsd.org (Postfix) with ESMTP id C396E8FC08 for ; Mon, 9 Apr 2012 19:28:09 +0000 (UTC) Received: from omta04.westchester.pa.mail.comcast.net ([76.96.62.35]) by qmta06.westchester.pa.mail.comcast.net with comcast id vvNM1i0020ldTLk56vU4iA; Mon, 09 Apr 2012 19:28:04 +0000 Received: from [192.168.0.30] ([66.41.84.80]) by omta04.westchester.pa.mail.comcast.net with comcast id vvU41i00l1jzK7m3QvU4Gb; Mon, 09 Apr 2012 19:28:04 +0000 Message-ID: <4F833842.2060507@comcast.net> Date: Mon, 09 Apr 2012 14:28:02 -0500 From: Denver Hull User-Agent: Mozilla/5.0 (X11; U; FreeBSD amd64; en-US; rv:1.9.1.19) Gecko/20110521 SeaMonkey/2.0.14 MIME-Version: 1.0 To: Hans Petter Selasky References: <4F6E0101.8020806@comcast.net> <201204012304.32240.hselasky@c2i.net> <4F832375.8010201@comcast.net> <201204092101.53603.hselasky@c2i.net> In-Reply-To: <201204092101.53603.hselasky@c2i.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 19:28:10 -0000 Hans Petter Selasky wrote: > On Monday 09 April 2012 19:59:17 Denver Hull wrote: > >> Hans Petter Selasky wrote: >> >>> On Thursday 29 March 2012 23:20:43 Denver Hull wrote: >>> >>>> Hans Petter Selasky wrote: >>>> >>>>> On Saturday 24 March 2012 18:14:41 Denver Hull wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> I discovered this when I saw an update to input-wacom at >>>>>> freshports.org. I've installed cuse4bsd, the new input-wacom, and the >>>>>> latest webcamd: >>>>>> cuse4bsd-kmod-0.1.23 >>>>>> input-wacom-40.0.11.1 >>>>>> webcamd-3.2.0.2 >>>>>> >>>>>> I believe I've followed all the instructions properly, and when I >>>>>> start webcamd, everything seems to be correct: >>>>>> Attached ugen1.2[0] to cuse unit 0 >>>>>> Creating /dev/input/event0 >>>>>> >>>>>> According to dmesg, ugen1.2 is the correct device (I have a Bamboo >>>>>> Pen): ugen1.2: at usbus1 >>>>>> >>>>>> The /dev/input/event0 node is indeed created. However, when I start >>>>>> X, I get the following: >>>>>> (EE) stylus: Wacom X driver can't grab event device (Bad address) >>>>>> (EE) eraser: Wacom X driver can't grab event device (Bad address) >>>>>> (EE) cursor: Wacom X driver can't grab event device (Bad address) >>>>>> (EE) pad: Wacom X driver can't grab event device (Bad address) >>>>>> (EE) touch: Wacom X driver can't grab event device (Bad address) >>>>>> Protocol not supported by server >>>>>> >>>>>> The last line repeats indefinitely, and X never finishes starting up. >>>>>> The system I'm trying this on is 8.3-PRERELEASE. I had tried this >>>>>> quickly a while ago on 8.2-STABLE with similar results. >>>>>> >>>>>> Does anyone have any ideas about what might be wrong? >>>>>> >>>>> Hi, >>>>> >>>>> I think the wacom has two interfaces. >>>>> >>>>> So you need to do two instances of webcamd, using -i 0 and -i 1 . >>>>> >>>>> Else search google for webcamd-3.4.0.1 >>>>> >>>>> --HPS >>>>> >>>> My Bamboo Pen is working fine now. I installed your latest version, >>>> webcamd-3.4.0.1, and that takes care of getting webcamd started >>>> properly. It's still necessary to make sure moused doesn't attach to >>>> the tablet. I'm not sure what the best way is to do that, but for now >>>> I've adjusted /etc/devd.conf so only the first ums device gets attached. >>>> >>>> Thanks Hans, this is great. I wish I had one or two other devices I >>>> could try. >>>> >>> Hi, >>> >>> To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS". >>> >>> --HPS >>> >> I don't get anything with that command on my 8.2-STABLE system. Is that >> something that will work on 9 but not 8? >> >> > Did you kldload usb_quirk ? > > --HPS > > Well, that reports "kldload: can't load usb_quirk: File exists", but usb_quirk isn't listed in kldstat. The man page for usb_quirk(4) doesn't show anything for UMS. However, everything listed in the man page is reported by "usbconfig dump_quirk_names". Or at least it looks that way. I didn't do a line by line check. I checked my kernel conf file, and there's no "device usb_quirk" line, and it's not in loader.conf, so I'm not sure where it's coming from. In my experience that kldload error usually just means it's compiled in. But it's not listed in my kernel conf file. So that's kind of a mystery. Thanks, Denver From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 19:29:17 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id AA210106566B for ; Mon, 9 Apr 2012 19:29:17 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe03.c2i.net [212.247.154.66]) by mx1.freebsd.org (Postfix) with ESMTP id 1B9C68FC12 for ; Mon, 9 Apr 2012 19:29:16 +0000 (UTC) X-T2-Spam-Status: No, hits=-0.2 required=5.0 tests=ALL_TRUSTED, BAYES_50 Received: from [176.74.212.201] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe03.swip.net (CommuniGate Pro SMTP 5.4.4) with ESMTPA id 94555653; Mon, 09 Apr 2012 21:29:14 +0200 From: Hans Petter Selasky To: Denver Hull Date: Mon, 9 Apr 2012 21:28:01 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.3-PRERELEASE; KDE/4.4.5; amd64; ; ) References: <4F6E0101.8020806@comcast.net> <201204092101.53603.hselasky@c2i.net> <4F833842.2060507@comcast.net> In-Reply-To: <4F833842.2060507@comcast.net> X-Face: 'mmZ:T{)),Oru^0c+/}w'`gU1$ubmG?lp!=R4Wy\ELYo2)@'UZ24N@d2+AyewRX}mAm; Yp |U[@, _z/([?1bCfM{_"B<.J>mICJCHAzzGHI{y7{%JVz%R~yJHIji`y>Y}k1C4TfysrsUI -%GU9V5]iUZF&nRn9mJ'?&>O MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201204092128.01748.hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 19:29:17 -0000 On Monday 09 April 2012 21:28:02 Denver Hull wrote: > Hans Petter Selasky wrote: > > On Monday 09 April 2012 19:59:17 Denver Hull wrote: > >> Hans Petter Selasky wrote: > >>> On Thursday 29 March 2012 23:20:43 Denver Hull wrote: > >>>> Hans Petter Selasky wrote: > >>>>> On Saturday 24 March 2012 18:14:41 Denver Hull wrote: > >>>>>> Hello, > >>>>>> > >>>>>> I discovered this when I saw an update to input-wacom at > >>>>>> freshports.org. I've installed cuse4bsd, the new input-wacom, and > >>>>>> the latest webcamd: > >>>>>> cuse4bsd-kmod-0.1.23 > >>>>>> input-wacom-40.0.11.1 > >>>>>> webcamd-3.2.0.2 > >>>>>> > >>>>>> I believe I've followed all the instructions properly, and when I > >>>>>> start webcamd, everything seems to be correct: > >>>>>> Attached ugen1.2[0] to cuse unit 0 > >>>>>> Creating /dev/input/event0 > >>>>>> > >>>>>> According to dmesg, ugen1.2 is the correct device (I have a Bamboo > >>>>>> Pen): ugen1.2: at usbus1 > >>>>>> > >>>>>> The /dev/input/event0 node is indeed created. However, when I start > >>>>>> X, I get the following: > >>>>>> (EE) stylus: Wacom X driver can't grab event device (Bad address) > >>>>>> (EE) eraser: Wacom X driver can't grab event device (Bad address) > >>>>>> (EE) cursor: Wacom X driver can't grab event device (Bad address) > >>>>>> (EE) pad: Wacom X driver can't grab event device (Bad address) > >>>>>> (EE) touch: Wacom X driver can't grab event device (Bad address) > >>>>>> Protocol not supported by server > >>>>>> > >>>>>> The last line repeats indefinitely, and X never finishes starting > >>>>>> up. The system I'm trying this on is 8.3-PRERELEASE. I had tried > >>>>>> this quickly a while ago on 8.2-STABLE with similar results. > >>>>>> > >>>>>> Does anyone have any ideas about what might be wrong? > >>>>> > >>>>> Hi, > >>>>> > >>>>> I think the wacom has two interfaces. > >>>>> > >>>>> So you need to do two instances of webcamd, using -i 0 and -i 1 . > >>>>> > >>>>> Else search google for webcamd-3.4.0.1 > >>>>> > >>>>> --HPS > >>>> > >>>> My Bamboo Pen is working fine now. I installed your latest version, > >>>> webcamd-3.4.0.1, and that takes care of getting webcamd started > >>>> properly. It's still necessary to make sure moused doesn't attach to > >>>> the tablet. I'm not sure what the best way is to do that, but for now > >>>> I've adjusted /etc/devd.conf so only the first ums device gets > >>>> attached. > >>>> > >>>> Thanks Hans, this is great. I wish I had one or two other devices I > >>>> could try. > >>> > >>> Hi, > >>> > >>> To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS". > >>> > >>> --HPS > >> > >> I don't get anything with that command on my 8.2-STABLE system. Is that > >> something that will work on 9 but not 8? > > > > Did you kldload usb_quirk ? > > > > --HPS > > Well, that reports "kldload: can't load usb_quirk: File exists", but > usb_quirk isn't listed in kldstat. The man page for usb_quirk(4) > doesn't show anything for UMS. However, everything listed in the man > page is reported by "usbconfig dump_quirk_names". Or at least it looks > that way. I didn't do a line by line check. > > I checked my kernel conf file, and there's no "device usb_quirk" line, > and it's not in loader.conf, so I'm not sure where it's coming from. In > my experience that kldload error usually just means it's compiled in. > But it's not listed in my kernel conf file. So that's kind of a mystery. Did you run the usbconfig command like root ? --HPS From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 19:42:39 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 241971065675 for ; Mon, 9 Apr 2012 19:42:39 +0000 (UTC) (envelope-from denverh@comcast.net) Received: from qmta14.westchester.pa.mail.comcast.net (qmta14.westchester.pa.mail.comcast.net [76.96.59.212]) by mx1.freebsd.org (Postfix) with ESMTP id D665C8FC12 for ; Mon, 9 Apr 2012 19:42:38 +0000 (UTC) Received: from omta18.westchester.pa.mail.comcast.net ([76.96.62.90]) by qmta14.westchester.pa.mail.comcast.net with comcast id vt2m1i0071wpRvQ5EvhYiD; Mon, 09 Apr 2012 19:41:32 +0000 Received: from [192.168.0.30] ([66.41.84.80]) by omta18.westchester.pa.mail.comcast.net with comcast id vvhX1i00U1jzK7m3evhXc2; Mon, 09 Apr 2012 19:41:31 +0000 Message-ID: <4F833B6A.8020602@comcast.net> Date: Mon, 09 Apr 2012 14:41:30 -0500 From: Denver Hull User-Agent: Mozilla/5.0 (X11; U; FreeBSD amd64; en-US; rv:1.9.1.19) Gecko/20110521 SeaMonkey/2.0.14 MIME-Version: 1.0 To: Hans Petter Selasky References: <4F6E0101.8020806@comcast.net> <201204092101.53603.hselasky@c2i.net> <4F833842.2060507@comcast.net> <201204092128.01748.hselasky@c2i.net> In-Reply-To: <201204092128.01748.hselasky@c2i.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 19:42:39 -0000 Hans Petter Selasky wrote: > On Monday 09 April 2012 21:28:02 Denver Hull wrote: > >> Hans Petter Selasky wrote: >> >>> On Monday 09 April 2012 19:59:17 Denver Hull wrote: >>> >>>> Hans Petter Selasky wrote: >>>> >>>>> On Thursday 29 March 2012 23:20:43 Denver Hull wrote: >>>>> >>>>>> Hans Petter Selasky wrote: >>>>>> >>>>>>> On Saturday 24 March 2012 18:14:41 Denver Hull wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> I discovered this when I saw an update to input-wacom at >>>>>>>> freshports.org. I've installed cuse4bsd, the new input-wacom, and >>>>>>>> the latest webcamd: >>>>>>>> cuse4bsd-kmod-0.1.23 >>>>>>>> input-wacom-40.0.11.1 >>>>>>>> webcamd-3.2.0.2 >>>>>>>> >>>>>>>> I believe I've followed all the instructions properly, and when I >>>>>>>> start webcamd, everything seems to be correct: >>>>>>>> Attached ugen1.2[0] to cuse unit 0 >>>>>>>> Creating /dev/input/event0 >>>>>>>> >>>>>>>> According to dmesg, ugen1.2 is the correct device (I have a Bamboo >>>>>>>> Pen): ugen1.2: at usbus1 >>>>>>>> >>>>>>>> The /dev/input/event0 node is indeed created. However, when I start >>>>>>>> X, I get the following: >>>>>>>> (EE) stylus: Wacom X driver can't grab event device (Bad address) >>>>>>>> (EE) eraser: Wacom X driver can't grab event device (Bad address) >>>>>>>> (EE) cursor: Wacom X driver can't grab event device (Bad address) >>>>>>>> (EE) pad: Wacom X driver can't grab event device (Bad address) >>>>>>>> (EE) touch: Wacom X driver can't grab event device (Bad address) >>>>>>>> Protocol not supported by server >>>>>>>> >>>>>>>> The last line repeats indefinitely, and X never finishes starting >>>>>>>> up. The system I'm trying this on is 8.3-PRERELEASE. I had tried >>>>>>>> this quickly a while ago on 8.2-STABLE with similar results. >>>>>>>> >>>>>>>> Does anyone have any ideas about what might be wrong? >>>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I think the wacom has two interfaces. >>>>>>> >>>>>>> So you need to do two instances of webcamd, using -i 0 and -i 1 . >>>>>>> >>>>>>> Else search google for webcamd-3.4.0.1 >>>>>>> >>>>>>> --HPS >>>>>>> >>>>>> My Bamboo Pen is working fine now. I installed your latest version, >>>>>> webcamd-3.4.0.1, and that takes care of getting webcamd started >>>>>> properly. It's still necessary to make sure moused doesn't attach to >>>>>> the tablet. I'm not sure what the best way is to do that, but for now >>>>>> I've adjusted /etc/devd.conf so only the first ums device gets >>>>>> attached. >>>>>> >>>>>> Thanks Hans, this is great. I wish I had one or two other devices I >>>>>> could try. >>>>>> >>>>> Hi, >>>>> >>>>> To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS". >>>>> >>>>> --HPS >>>>> >>>> I don't get anything with that command on my 8.2-STABLE system. Is that >>>> something that will work on 9 but not 8? >>>> >>> Did you kldload usb_quirk ? >>> >>> --HPS >>> >> Well, that reports "kldload: can't load usb_quirk: File exists", but >> usb_quirk isn't listed in kldstat. The man page for usb_quirk(4) >> doesn't show anything for UMS. However, everything listed in the man >> page is reported by "usbconfig dump_quirk_names". Or at least it looks >> that way. I didn't do a line by line check. >> >> I checked my kernel conf file, and there's no "device usb_quirk" line, >> and it's not in loader.conf, so I'm not sure where it's coming from. In >> my experience that kldload error usually just means it's compiled in. >> But it's not listed in my kernel conf file. So that's kind of a mystery. >> > Did you run the usbconfig command like root ? > > --HPS > > Yes. From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 19:56:35 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A102E106566B for ; Mon, 9 Apr 2012 19:56:35 +0000 (UTC) (envelope-from hselasky@c2i.net) Received: from swip.net (mailfe08.c2i.net [212.247.154.226]) by mx1.freebsd.org (Postfix) with ESMTP id 299AA8FC0A for ; Mon, 9 Apr 2012 19:56:34 +0000 (UTC) X-T2-Spam-Status: No, hits=-0.2 required=5.0 tests=ALL_TRUSTED, BAYES_50 Received: from [176.74.212.201] (account mc467741@c2i.net HELO laptop002.hselasky.homeunix.org) by mailfe08.swip.net (CommuniGate Pro SMTP 5.4.4) with ESMTPA id 261514636; Mon, 09 Apr 2012 21:56:26 +0200 From: Hans Petter Selasky To: Denver Hull Date: Mon, 9 Apr 2012 21:55:13 +0200 User-Agent: KMail/1.13.5 (FreeBSD/8.3-PRERELEASE; KDE/4.4.5; amd64; ; ) References: <4F6E0101.8020806@comcast.net> <201204092128.01748.hselasky@c2i.net> <4F833B6A.8020602@comcast.net> In-Reply-To: <4F833B6A.8020602@comcast.net> X-Face: 'mmZ:T{)),Oru^0c+/}w'`gU1$ubmG?lp!=R4Wy\ELYo2)@'UZ24N@d2+AyewRX}mAm; Yp |U[@, _z/([?1bCfM{_"B<.J>mICJCHAzzGHI{y7{%JVz%R~yJHIji`y>Y}k1C4TfysrsUI -%GU9V5]iUZF&nRn9mJ'?&>O MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201204092155.13313.hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 19:56:35 -0000 On Monday 09 April 2012 21:41:30 Denver Hull wrote: > Hans Petter Selasky wrote: > > > > Did you run the usbconfig command like root ? > > > > --HPS > > Yes. Hi, It looks like we currently don't have a quirk for UMS, like the following. Adding one such though would be trivial. UQ_HID_IGNORE UQ_KBD_IGNORE --HPS From owner-freebsd-usb@FreeBSD.ORG Mon Apr 9 20:04:18 2012 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 1EAE4106564A for ; Mon, 9 Apr 2012 20:04:18 +0000 (UTC) (envelope-from denverh@comcast.net) Received: from qmta08.westchester.pa.mail.comcast.net (qmta08.westchester.pa.mail.comcast.net [76.96.62.80]) by mx1.freebsd.org (Postfix) with ESMTP id D1B8C8FC12 for ; Mon, 9 Apr 2012 20:04:17 +0000 (UTC) Received: from omta08.westchester.pa.mail.comcast.net ([76.96.62.12]) by qmta08.westchester.pa.mail.comcast.net with comcast id vw2s1i0010Fqzac58w3B7V; Mon, 09 Apr 2012 20:03:11 +0000 Received: from [192.168.0.30] ([66.41.84.80]) by omta08.westchester.pa.mail.comcast.net with comcast id vw3A1i0161jzK7m3Uw3BGj; Mon, 09 Apr 2012 20:03:11 +0000 Message-ID: <4F83407D.7070900@comcast.net> Date: Mon, 09 Apr 2012 15:03:09 -0500 From: Denver Hull User-Agent: Mozilla/5.0 (X11; U; FreeBSD amd64; en-US; rv:1.9.1.19) Gecko/20110521 SeaMonkey/2.0.14 MIME-Version: 1.0 To: Hans Petter Selasky References: <4F6E0101.8020806@comcast.net> <201204092128.01748.hselasky@c2i.net> <4F833B6A.8020602@comcast.net> <201204092155.13313.hselasky@c2i.net> In-Reply-To: <201204092155.13313.hselasky@c2i.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-usb@freebsd.org Subject: Re: wacom and x11 and webcamd X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 09 Apr 2012 20:04:18 -0000 Hans Petter Selasky wrote: > On Monday 09 April 2012 21:41:30 Denver Hull wrote: > >> Hans Petter Selasky wrote: >> > >>> Did you run the usbconfig command like root ? >>> >>> --HPS >>> >> Yes. >> > Hi, > > It looks like we currently don't have a quirk for UMS, like the following. > Adding one such though would be trivial. > > UQ_HID_IGNORE > UQ_KBD_IGNORE > > --HPS > > Ok, so until we do have one, I'll continue to use devd.conf to specify the exact device for moused. Thanks, Denver From owner-freebsd-usb@FreeBSD.ORG Wed Apr 11 15:30:14 2012 Return-Path: Delivered-To: freebsd-usb@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3FD0C1065675 for ; Wed, 11 Apr 2012 15:30:14 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id F3B9E8FC15 for ; Wed, 11 Apr 2012 15:30:13 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q3BFUDfC058846 for ; Wed, 11 Apr 2012 15:30:13 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q3BFUDda058845; Wed, 11 Apr 2012 15:30:13 GMT (envelope-from gnats) Resent-Date: Wed, 11 Apr 2012 15:30:13 GMT Resent-Message-Id: <201204111530.q3BFUDda058845@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-usb@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Andrew Gregory Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 408431065675 for ; Wed, 11 Apr 2012 15:29:54 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from red.freebsd.org (red.freebsd.org [IPv6:2001:4f8:fff6::22]) by mx1.freebsd.org (Postfix) with ESMTP id 2C58A8FC12 for ; Wed, 11 Apr 2012 15:29:54 +0000 (UTC) Received: from red.freebsd.org (localhost [127.0.0.1]) by red.freebsd.org (8.14.4/8.14.4) with ESMTP id q3BFTrdW078652 for ; Wed, 11 Apr 2012 15:29:53 GMT (envelope-from nobody@red.freebsd.org) Received: (from nobody@localhost) by red.freebsd.org (8.14.4/8.14.4/Submit) id q3BFTrO5078651; Wed, 11 Apr 2012 15:29:53 GMT (envelope-from nobody) Message-Id: <201204111529.q3BFTrO5078651@red.freebsd.org> Date: Wed, 11 Apr 2012 15:29:53 GMT From: Andrew Gregory To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Cc: Subject: usb/166848: Buffalo RUF2 requires quirk X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 11 Apr 2012 15:30:14 -0000 >Number: 166848 >Category: usb >Synopsis: Buffalo RUF2 requires quirk >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Apr 11 15:30:13 UTC 2012 >Closed-Date: >Last-Modified: >Originator: Andrew Gregory >Release: 8.2 >Organization: Southern Cross Software Solutions >Environment: FreeBSD domain-redacted 8.2-RELEASE-p6 FreeBSD 8.2-RELEASE-p6 #0: Mon Apr 9 04:53:29 UTC 2012 root@domain-redacted:/usr/local/8.2.0-BETA2/os-base/amd64/usr/local/8.2.0-BETA2/FreeBSD/src/sys/FREENAS.amd64 amd64 >Description: I've recently built a FreeNAS 8.2.0 system using some Buffalo RUF2 Flash drives for the operating system and swap. Specifically: http://www.buffalo-asia.com/cgi-bin/products/detail.cgi?country=ar&code=5&id=485 These reported frequent cache sync errors until I built a custom kernel with a quirk added to sys/dev/usb/quirk/usb_quirk.c. I presume a proper fix would add the VID and PID to usbdevs as well. >How-To-Repeat: Write to Buffalo RUF2 flash drives using FreeBSD. Many errors are reported as: (da1:umass-sim1:1:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0 (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI status: Check Condition (da1:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) >Fix: Line to add to usb_quirk.c: USB_QUIRK_VP(0x13fe, 0x2240, 0x0000, 0xffff, UQ_MSC_NO_SYNC_CACHE), >Release-Note: >Audit-Trail: >Unformatted: