From owner-freebsd-arm@FreeBSD.ORG Mon Jan 21 11:06:42 2013 Return-Path: Delivered-To: freebsd-arm@FreeBSD.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id D3067B7F for ; Mon, 21 Jan 2013 11:06:42 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id C4F8E70C for ; Mon, 21 Jan 2013 11:06:42 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.6/8.14.6) with ESMTP id r0LB6gip054007 for ; Mon, 21 Jan 2013 11:06:42 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.6/8.14.6/Submit) id r0LB6gLM054005 for freebsd-arm@FreeBSD.org; Mon, 21 Jan 2013 11:06:42 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 21 Jan 2013 11:06:42 GMT Message-Id: <201301211106.r0LB6gLM054005@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-arm@FreeBSD.org Subject: Current problem reports assigned to freebsd-arm@FreeBSD.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Jan 2013 11:06:42 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o arm/174461 arm [patch] Fix off-by-one in arm9/arm10 cache maintenance o arm/173617 arm Dreamplug exhibits eSATA file corruption using network o kern/171096 arm [arm][xscale][ixp]Allow 16bit access on PCI bus o arm/166256 arm build fail in pmap.c o arm/162159 arm [panic] USB errors leading to panic on DockStar 9.0-RC o arm/161110 arm /usr/src/sys/arm/include/signal.h is bad o arm/161044 arm devel/icu does not build on arm o arm/158950 arm arm/sheevaplug fails fsx when mmap operations are enab o arm/155894 arm [patch] Enable at91 booting from SDHC (high capacity) p arm/155214 arm [patch] MMC/SD IO slow on Atmel ARM with modern large o arm/154227 arm [geli] using GELI leads to panic on ARM o arm/153380 arm Panic / translation fault with wlan on ARM o arm/150581 arm [irq] Unknown error generates IRQ address decoding err o arm/149288 arm mail/dovecot causes panic during configure on Sheevapl o arm/134368 arm [patch] nslu2_led driver for the LEDs on the NSLU2 p arm/134338 arm [patch] Lock GPIO accesses on ixp425 16 problems total. From owner-freebsd-arm@FreeBSD.ORG Thu Jan 24 23:52:23 2013 Return-Path: Delivered-To: arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 151B8535; Thu, 24 Jan 2013 23:52:23 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id B8986EC7; Thu, 24 Jan 2013 23:52:22 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.5/8.14.5) with ESMTP id r0ONqF6R015125; Thu, 24 Jan 2013 18:52:15 -0500 (EST) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.5/8.14.5/Submit) id r0ONqFVR015124; Thu, 24 Jan 2013 23:52:15 GMT (envelope-from tinderbox@freebsd.org) Date: Thu, 24 Jan 2013 23:52:15 GMT Message-Id: <201301242352.r0ONqFVR015124@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Subject: [head tinderbox] failure on arm/arm Precedence: bulk X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Jan 2013 23:52:23 -0000 TB --- 2013-01-24 23:50:17 - tinderbox 2.10 running on freebsd-current.sentex.ca TB --- 2013-01-24 23:50:17 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012 des@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64 TB --- 2013-01-24 23:50:17 - starting HEAD tinderbox run for arm/arm TB --- 2013-01-24 23:50:17 - cleaning the object tree TB --- 2013-01-24 23:50:17 - /usr/local/bin/svn stat /src TB --- 2013-01-24 23:50:21 - At svn revision 245894 TB --- 2013-01-24 23:50:22 - building world TB --- 2013-01-24 23:50:22 - CROSS_BUILD_TESTING=YES TB --- 2013-01-24 23:50:22 - MAKEOBJDIRPREFIX=/obj TB --- 2013-01-24 23:50:22 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2013-01-24 23:50:22 - SRCCONF=/dev/null TB --- 2013-01-24 23:50:22 - TARGET=arm TB --- 2013-01-24 23:50:22 - TARGET_ARCH=arm TB --- 2013-01-24 23:50:22 - TZ=UTC TB --- 2013-01-24 23:50:22 - __MAKE_CONF=/dev/null TB --- 2013-01-24 23:50:22 - cd /src TB --- 2013-01-24 23:50:22 - /usr/bin/make -B buildworld >>> Building an up-to-date make(1) >>> World build started on Thu Jan 24 23:50:27 UTC 2013 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree [...] rm -f .depend GPATH GRTAGS GSYMS GTAGS ===> gnu/usr.bin/cc/cc1plus (cleandir) rm -f cfns.h cc1plus-dummy cc1plus-checksum.c cc1plus cc1plus-checksum.o main.o cp-lang.o c-opts.o call.o class.o cvt.o cxx-pretty-print.o decl.o decl2.o error.o except.o expr.o dump.o friend.o init.o lex.o mangle.o method.o name-lookup.o parser.o pt.o ptree.o repo.o rtti.o search.o semantics.o tree.o typeck.o typeck2.o optimize.o cp-objcp-common.o cp-gimplify.o tree-mudflap.o rm -f .depend GPATH GRTAGS GSYMS GTAGS ===> gnu/usr.bin/cc/c++ (cleandir) "../Makefile.inc", line 29: Malformed conditional (${TARGET_CPUARCH} == "arm" && ${MK_ARM_EABI} != "no") "../Makefile.inc", line 110: if-less endif make: fatal errors encountered -- cannot continue *** [cleandir] Error code 1 Stop in /src/gnu/usr.bin/cc. *** [cleandir] Error code 1 Stop in /src/gnu/usr.bin. *** [cleandir] Error code 1 Stop in /src/gnu. *** [gnu.cleandir__D] Error code 1 Stop in /src. *** [_cleanobj] Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2013-01-24 23:52:15 - WARNING: /usr/bin/make returned exit code 1 TB --- 2013-01-24 23:52:15 - ERROR: failed to build world TB --- 2013-01-24 23:52:15 - 80.16 user 15.41 system 118.16 real http://tinderbox.freebsd.org/tinderbox-head-ss-build-HEAD-arm-arm.full From owner-freebsd-arm@FreeBSD.ORG Fri Jan 25 08:07:43 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id C51A4540 for ; Fri, 25 Jan 2013 08:07:43 +0000 (UTC) (envelope-from alie@affle.com) Received: from mail-qc0-f174.google.com (mail-qc0-f174.google.com [209.85.216.174]) by mx1.freebsd.org (Postfix) with ESMTP id 7E25D401 for ; Fri, 25 Jan 2013 08:07:43 +0000 (UTC) Received: by mail-qc0-f174.google.com with SMTP id z24so43101qcq.5 for ; Fri, 25 Jan 2013 00:07:36 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-received:in-reply-to:references:date:message-id :subject:from:to:cc:content-type:x-gm-message-state; bh=nyOtraUYvpDojBbuXrmHdszMPpj3sTUyfnDhAMVGFqI=; b=M9xhug3BOahKZdEbKIBVPkHhKQiRW9VZAk+6p60X9+/Ahv6iom91lMNTbqHDfuXEkt plECn+kAoiJsbGBbQPD+laZfiFYGs/6jKIB8SsVqa9ua8TcwKGXFQ0liBwxxxesd2+2E VQLajcAWtlIOk4syPOOXHicOtFewJ3/g5xrQsYsguopsSzXV4nWY7sXwPphC2xGYdqHb oYHI2GSUWdIc0NZtyQxdMqd5CCpTbYE0MHAVyAvGUk/dsn+E1YfC6uOT0XHAQPJpB/jb bdQojpP/DsQvifPUrg70WFIjwLgR3nLLDCftUvaZ8PdjETxKefGJRN7yjvObtitvH/PW l30w== MIME-Version: 1.0 X-Received: by 10.224.185.78 with SMTP id cn14mr4993240qab.30.1359101256082; Fri, 25 Jan 2013 00:07:36 -0800 (PST) Received: by 10.49.2.72 with HTTP; Fri, 25 Jan 2013 00:07:35 -0800 (PST) In-Reply-To: <50FB2316.4060300@m5p.com> References: <50FB2316.4060300@m5p.com> Date: Fri, 25 Jan 2013 16:07:35 +0800 Message-ID: Subject: Re: FreeBSD ARM with swap partition and tmpfs From: Alie Tan To: George Mitchell Content-Type: multipart/mixed; boundary=20cf302efa849524cc04d4186bca X-Gm-Message-State: ALoCoQl4ks42u/85kVptaBnQs6EqyvmUHd50INwHVDIdflU32BK1fsw1SSWeCsMiD0yXU8yjiyDD X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: "freebsd-arm@freebsd.org" X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Jan 2013 08:07:43 -0000 --20cf302efa849524cc04d4186bca Content-Type: text/plain; charset=ISO-8859-1 Try the script attached to install the kernel and uboot directly to your SD card. The kernel contains ulpt and USB wireless drives too. On Sun, Jan 20, 2013 at 6:49 AM, George Mitchell wrote: > On 01/15/13 04:02, Alie Tan wrote: > >> Hi, >> >> I just built new 4G FreeBSD image for Raspberry Pi (username/password: >> root/freebsdarm): >> http://www.snakeorladder.com/**bsd-pi-r245446.img.gz >> >> This image has tmpfs, swap space, and compiled without DDB, KDB, GDB, >> etc. >> Do let me know if you have any issue with this image. >> >> I will share FreeBSD Pi image compiled with GCC46 ASAP :-D >> >> Regards, >> Alie T >> ______________________________**_________________ >> freebsd-arm@freebsd.org mailing list >> http://lists.freebsd.org/**mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@**freebsd.org >> " >> >> > Thanks very much! I've been running this image continuously for three > and a half days. I've compiled ghostscript and cups-base (and also perl > and python). Do you by any chance have the ulpt.ko module that goes > with this kernel available? The Pi is the only place I could try > compiling it right now, and that would take quite a while, so I would be > very grateful if it's already built somewhere. > > Perhaps someone might be interested in my compiled packages? > > autoconf-2.69.txz jbigkit-1.6.txz > autoconf-wrapper-20101119.txz jpeg-8_3.txz > cmake-2.8.9.txz lcms2-2.4.txz > cmake-modules-2.8.9.txz libiconv-1.14.txz > cups-1.5.2.txz libidn-1.25.txz > cups-base-1.5.2_2.txz libpaper-1.1.24_1.txz > cups-client-1.5.2_2.txz libtool-2.4.2.txz > cups-image-1.5.2_1.txz lynx-2.8.7.2,1.txz > cups-pstoraster-8.15.4_7.txz m4-1.4.16_1,1.txz > expat-2.0.1_2.txz openldap-client-2.4.33.txz > fontconfig-2.9.0,1.txz p5-Locale-gettext-1.05_3.txz > freetype2-2.4.9_1.txz perl-5.14.2_2.txz > gettext-0.18.1.1.txz pkg-1.0.3_1.txz > ghostscript9-nox11-9.06_1.txz pkgconf-0.8.9.txz > gmake-3.82_1.txz png-1.5.12.txz > gsfonts-8.11_5.txz portmaster-3.14_8.txz > help2man-1.40.13.txz python27-2.7.3_3.txz > jbig2dec-0.11_1.txz tiff-4.0.2_1.txz > > cupsd (from cups-base) isn't very stable, and I'm still debugging it. > -- George > ______________________________**_________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/**mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@**freebsd.org > " > --20cf302efa849524cc04d4186bca-- From owner-freebsd-arm@FreeBSD.ORG Fri Jan 25 08:19:01 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 3749E8C7 for ; Fri, 25 Jan 2013 08:19:01 +0000 (UTC) (envelope-from ghw@7axu.com) Received: from mail-wi0-f171.google.com (mail-wi0-f171.google.com [209.85.212.171]) by mx1.freebsd.org (Postfix) with ESMTP id C4B9F68A for ; Fri, 25 Jan 2013 08:19:00 +0000 (UTC) Received: by mail-wi0-f171.google.com with SMTP id hn14so1185265wib.10 for ; Fri, 25 Jan 2013 00:18:54 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:mime-version:x-originating-ip:from:date:message-id :subject:to:content-type:x-gm-message-state; bh=xScFUGXHo79uV0IQsY9Xp8rXJwhwtC+DrMUL8S6DK98=; b=Kh0quoKkbqjCH/UCrt2f6/Gr6MJeSA4h8oUy7IdlgQjE7K0ou9z/awXmJguZVEJ5re 9lNu9lE6LsH1lWWw2nlTYiaueBEfyFTOBtwtPn8MdF05GtsdZlX1ZwOAwqO+ZWyElE3l Vpy9BoVo9YNQI6OuIrmuFyenIcgRF/a8gN3K+jexjJIegg+ivuHVt602M/++T+PI+hO2 3AcdrkLYemvwNYZngkpkVud1USxc6qVcvKWnMdy0LI+nin0yPROLumLj57mp5tColwfU rnX2r1wEJ60kNSlsjLTiBlk0bLaREV0/a8TXERDMqpb/NpqcyJSHwhm9YV+PHlitmNxX cpFQ== X-Received: by 10.180.97.68 with SMTP id dy4mr7054335wib.7.1359101934020; Fri, 25 Jan 2013 00:18:54 -0800 (PST) MIME-Version: 1.0 Received: by 10.194.30.102 with HTTP; Fri, 25 Jan 2013 00:18:13 -0800 (PST) X-Originating-IP: [74.63.212.29] From: XiaoQI Ge Date: Fri, 25 Jan 2013 16:18:13 +0800 Message-ID: Subject: Hope for the help on building the supported image for FreeBSD To: freebsd-arm@freebsd.org X-Gm-Message-State: ALoCoQndJkxDSvdVxMGEXSE9O9/fxBKl38m8H6wPX4/ck1EHcIdjaH9wlw2vj5FJItWSpETKL9CZ Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Jan 2013 08:19:01 -0000 I've just bought an CubieBoard, but when I searched the httpXXX,found there was not any materials about CubieBoard, and I just want ask how to compile the IMG for Freebsd, espically on the ubldr part From owner-freebsd-arm@FreeBSD.ORG Fri Jan 25 08:22:02 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 0B2AF932 for ; Fri, 25 Jan 2013 08:22:02 +0000 (UTC) (envelope-from alie@affle.com) Received: from mail-qa0-f46.google.com (mail-qa0-f46.google.com [209.85.216.46]) by mx1.freebsd.org (Postfix) with ESMTP id C5E306AC for ; Fri, 25 Jan 2013 08:22:01 +0000 (UTC) Received: by mail-qa0-f46.google.com with SMTP id r4so952529qaq.5 for ; Fri, 25 Jan 2013 00:21:55 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-received:in-reply-to:references:date:message-id :subject:from:to:cc:content-type:x-gm-message-state; bh=3N5yod1YkSJZHb5eg57bFSYxfjggsz0geycFdWTzhws=; b=We9eCuSWCwg026AW84L+g9zIWujIL7Joe5JjS9a5f15LUVe+wKZRpBQrQ0u+kQmAh8 tnyHBBSJGvP3lDGeDOSLx8d/ZUe8bEo86+08GjZ4CRyVBrT9AbBVG09N9f3UjJeFsfi5 KZ8Alt1MLUsNNgStUGha++smry//ahbu/mP2SJfYGmFoKf7GPTr2Cf8gUjC7MVSI/nmy yuOiWRzf+c2qjljB5/gpwGHRMr3APltWR5kzbNE+80TMiF0ElF2ZFiQLoHWbDP0LYg8X 5amjM1huOqkyjjWIjd6mNgVSjhWNRNJu1GvE7DQg31Dpt8q3fl0BXxZw3EccYfnJFFM4 l5bA== MIME-Version: 1.0 X-Received: by 10.224.185.148 with SMTP id co20mr4961399qab.94.1359102115089; Fri, 25 Jan 2013 00:21:55 -0800 (PST) Received: by 10.49.2.72 with HTTP; Fri, 25 Jan 2013 00:21:55 -0800 (PST) In-Reply-To: References: Date: Fri, 25 Jan 2013 16:21:55 +0800 Message-ID: Subject: Re: Hope for the help on building the supported image for FreeBSD From: Alie Tan To: XiaoQI Ge X-Gm-Message-State: ALoCoQlBkH6M7Fd0DfWcsMwZh9G4H2RW7LHh5zMn/EWIP1AxZ/WY9cOwXVJT57no3d8KzQ1gLwTU Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: "freebsd-arm@freebsd.org" X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Jan 2013 08:22:02 -0000 Use script from Tim here: https://github.com/kientzle/freebsd-beaglebone And replace the KERNCONF to CUBIEBOARD On Fri, Jan 25, 2013 at 4:18 PM, XiaoQI Ge wrote: > I've just bought an CubieBoard, but when I searched the httpXXX,found > there was not any materials about CubieBoard, and I just want ask how to > compile the IMG for Freebsd, espically on the ubldr part > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > From owner-freebsd-arm@FreeBSD.ORG Fri Jan 25 09:05:43 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id EB3DD3C0 for ; Fri, 25 Jan 2013 09:05:43 +0000 (UTC) (envelope-from ganbold@gmail.com) Received: from mail-ia0-x235.google.com (ia-in-x0235.1e100.net [IPv6:2607:f8b0:4001:c02::235]) by mx1.freebsd.org (Postfix) with ESMTP id 939F486E for ; Fri, 25 Jan 2013 09:05:43 +0000 (UTC) Received: by mail-ia0-f181.google.com with SMTP id k25so232469iah.26 for ; Fri, 25 Jan 2013 01:05:43 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:x-received:in-reply-to:references:date:message-id :subject:from:to:cc:content-type; bh=Gkb338FgfH0EKwOxC9jEQEiewom/0/1LVlIYZfoxlgY=; b=gxdIvqNKHIykjNZRl9dE3400fakhzgcB7LhWXc1H1KUO6tJJeWqT2krxIsxrN3fGY6 yK/10hVGa19hqKoS14a9M2ggV7Gj5DYTo/A2vAwq5vdkbe8a1hkGsLo6U6ePi5CJqDDg YRo6+5Kcj3lmdQYkNe8kaZp2ieid3LE06k7Dzeh0dXVF7nSNzhNag55P5NokB6oC78iN Gy+sVH1SqtAmfJm8MYodYIkYOjweGRB6+IgwdDjeie/Z2W8cS3u0/5tq986KKlLEFTbX HcK+FuXLUoZjg3YaDuE+uqlDnuxcc9aakQRkBaPjQAY5CAHOtVC/gaxztMIL62p/bNwt 3Ihw== MIME-Version: 1.0 X-Received: by 10.50.219.169 with SMTP id pp9mr3497903igc.46.1359104743065; Fri, 25 Jan 2013 01:05:43 -0800 (PST) Received: by 10.64.170.167 with HTTP; Fri, 25 Jan 2013 01:05:42 -0800 (PST) In-Reply-To: References: Date: Fri, 25 Jan 2013 17:05:42 +0800 Message-ID: Subject: Re: Hope for the help on building the supported image for FreeBSD From: Ganbold Tsagaankhuu To: XiaoQI Ge Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-arm@freebsd.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Jan 2013 09:05:44 -0000 On Fri, Jan 25, 2013 at 4:18 PM, XiaoQI Ge wrote: > I've just bought an CubieBoard, but when I searched the httpXXX,found > there was not any materials about CubieBoard, and I just want ask how to > compile the IMG for Freebsd, espically on the ubldr part You have to prepare SD card with special layout like http://linux-sunxi.org/U-Boot. (You can also use SD card which was prepared for linux, just remove/rename uImage) Once SD card is ready make sure you have xdev tools built. Make sure you have CURRENT machine with source. Tim's script also require xdev tools and you can build it like: cd /usr/src make xdev XDEV=arm XDEV_ARCH=arm Then you can compile kernel like: make TARGET_ARCH=armv6 KERNCONF=CUBIEBOARD buildkernel and put your kernel to fat partition of SD card and you are ready to boot. To boot using sd card, at uboot prompt type: fatload mmc 0 0x40200000 kernel go 0x40200100 Ganbold > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" From owner-freebsd-arm@FreeBSD.ORG Fri Jan 25 23:06:39 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id A87C2DAB for ; Fri, 25 Jan 2013 23:06:39 +0000 (UTC) (envelope-from imp@bsdimp.com) Received: from mail-ye0-f172.google.com (mail-ye0-f172.google.com [209.85.213.172]) by mx1.freebsd.org (Postfix) with ESMTP id 6F544F94 for ; Fri, 25 Jan 2013 23:06:39 +0000 (UTC) Received: by mail-ye0-f172.google.com with SMTP id m10so153057yen.17 for ; Fri, 25 Jan 2013 15:06:33 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:sender:subject:mime-version:content-type:from :in-reply-to:date:cc:content-transfer-encoding:message-id:references :to:x-mailer:x-gm-message-state; bh=jjFDQwEQztsQxxf3dDwepgab3y7A07frT68wjuKDF6M=; b=Z4kjOIRNRJtPa2JWPSJi5a/C4RPgZOwipSuoTjQ9El7S45dpc1OTKIpGnStU9NxnLI X+AUdwfAuq1C2GuWg32JzAC6CSKbheO1DUQRMLkoMsPleNFu6YYcqvCmUP3AHvqcjYQC bvxCL0JmH2a9bZgEx6q5Mh2Q2kdG2nDbKjhD3qRtceMA83bZO+T/4xuoHfKnSptPmTRM 5R1vZa7ovKUkGVw1MaFLTTwJeFCaWj/cFLWsU17dAGR0Ux0NXz5wYocjUqSnzJulCxvp nfqr22J7Wln2yljLlXBrAH0ziGOwrxYmfZAkw9bjcLDT/2RZ1bCXsdbb4V2FeKQaq8t3 LI9g== X-Received: by 10.236.184.166 with SMTP id s26mr7744616yhm.76.1359151791521; Fri, 25 Jan 2013 14:09:51 -0800 (PST) Received: from fusionlt2834a.int.fusionio.com ([209.117.142.2]) by mx.google.com with ESMTPS id r17sm2062535ani.8.2013.01.25.14.09.49 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Fri, 25 Jan 2013 14:09:50 -0800 (PST) Sender: Warner Losh Subject: Re: Hope for the help on building the supported image for FreeBSD Mime-Version: 1.0 (Apple Message framework v1085) Content-Type: text/plain; charset=us-ascii From: Warner Losh In-Reply-To: Date: Fri, 25 Jan 2013 15:09:47 -0700 Content-Transfer-Encoding: 7bit Message-Id: References: To: Ganbold Tsagaankhuu X-Mailer: Apple Mail (2.1085) X-Gm-Message-State: ALoCoQn3sEakGzK54x8wZsRkuiTQSLD2506lqZfUrPGs/RU90zCR5NTJseQtuwagZW7EK+R9QPfS Cc: freebsd-arm@freebsd.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Jan 2013 23:06:39 -0000 On Jan 25, 2013, at 2:05 AM, Ganbold Tsagaankhuu wrote: > On Fri, Jan 25, 2013 at 4:18 PM, XiaoQI Ge wrote: >> I've just bought an CubieBoard, but when I searched the httpXXX,found >> there was not any materials about CubieBoard, and I just want ask how to >> compile the IMG for Freebsd, espically on the ubldr part > > You have to prepare SD card with special layout like > http://linux-sunxi.org/U-Boot. > (You can also use SD card which was prepared for linux, just > remove/rename uImage) > > Once SD card is ready make sure you have xdev tools built. > Make sure you have CURRENT machine with source. > Tim's script also require xdev tools and you can build it like: > > cd /usr/src > make xdev XDEV=arm XDEV_ARCH=arm shouldn't that be XDEV_ARCH=armv6? Warner > > Then you can compile kernel like: > > make TARGET_ARCH=armv6 KERNCONF=CUBIEBOARD buildkernel > > and put your kernel to fat partition of SD card and you are ready to boot. > > To boot using sd card, at uboot prompt type: > > fatload mmc 0 0x40200000 kernel > go 0x40200100 > > > Ganbold > >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" From owner-freebsd-arm@FreeBSD.ORG Sat Jan 26 14:10:00 2013 Return-Path: Delivered-To: freebsd-arm@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id B39AF7E3 for ; Sat, 26 Jan 2013 14:10:00 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 786EEEE for ; Sat, 26 Jan 2013 14:10:00 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.6/8.14.6) with ESMTP id r0QEA0Qk071119 for ; Sat, 26 Jan 2013 14:10:00 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.6/8.14.6/Submit) id r0QEA0vt071118; Sat, 26 Jan 2013 14:10:00 GMT (envelope-from gnats) Resent-Date: Sat, 26 Jan 2013 14:10:00 GMT Resent-Message-Id: <201301261410.r0QEA0vt071118@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-arm@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, xianjie Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id C50F1798 for ; Sat, 26 Jan 2013 14:04:05 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from red.freebsd.org (red.freebsd.org [IPv6:2001:4f8:fff6::22]) by mx1.freebsd.org (Postfix) with ESMTP id ADD0DCE for ; Sat, 26 Jan 2013 14:04:05 +0000 (UTC) Received: from red.freebsd.org (localhost [127.0.0.1]) by red.freebsd.org (8.14.5/8.14.5) with ESMTP id r0QE44iv059196 for ; Sat, 26 Jan 2013 14:04:04 GMT (envelope-from nobody@red.freebsd.org) Received: (from nobody@localhost) by red.freebsd.org (8.14.5/8.14.5/Submit) id r0QE44Fi059195; Sat, 26 Jan 2013 14:04:04 GMT (envelope-from nobody) Message-Id: <201301261404.r0QE44Fi059195@red.freebsd.org> Date: Sat, 26 Jan 2013 14:04:04 GMT From: xianjie To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Subject: arm/175605: please fix build binutils-2.23.1 in raspberry pi X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Jan 2013 14:10:00 -0000 >Number: 175605 >Category: arm >Synopsis: please fix build binutils-2.23.1 in raspberry pi >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-arm >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Sat Jan 26 14:10:00 UTC 2013 >Closed-Date: >Last-Modified: >Originator: xianjie >Release: freebsd 10 current >Organization: NTES >Environment: FreeBSD raspberry-pi 10.0-CURRENT FreeBSD 10.0-CURRENT #6 r245782: Tue Jan 22 17:46:59 CST 2013 root@laptop:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm >Description: binutils-2.23.1 build failed in raspberry pi >How-To-Repeat: build binutils-2.23.1 in raspberry pi >Fix: add support armv6-portbld-freebsd10.0 in binutils' config files example: /usr/ports/devel/binutils/work/binutils-2.23.1/bfd/configure: arm-*-freebsd* | arm-*-kfreebsd*-gnu | armv6-*-freebsd*) >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-arm@FreeBSD.ORG Sat Jan 26 17:55:37 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 83621CDA for ; Sat, 26 Jan 2013 17:55:37 +0000 (UTC) (envelope-from tim@kientzle.com) Received: from monday.kientzle.com (99-115-135-74.uvs.sntcca.sbcglobal.net [99.115.135.74]) by mx1.freebsd.org (Postfix) with ESMTP id 08D0A98B for ; Sat, 26 Jan 2013 17:55:36 +0000 (UTC) Received: (from root@localhost) by monday.kientzle.com (8.14.4/8.14.4) id r0QHfE1I022405; Sat, 26 Jan 2013 17:41:14 GMT (envelope-from tim@kientzle.com) Received: from [192.168.2.143] (CiscoE3000 [192.168.1.65]) by kientzle.com with SMTP id cksg2rr5sz7fnmb3jcysea4tai; Sat, 26 Jan 2013 17:41:14 +0000 (UTC) (envelope-from tim@kientzle.com) Subject: Re: Hope for the help on building the supported image for FreeBSD Mime-Version: 1.0 (Apple Message framework v1283) Content-Type: text/plain; charset=us-ascii From: Tim Kientzle In-Reply-To: Date: Sat, 26 Jan 2013 09:41:13 -0800 Content-Transfer-Encoding: 7bit Message-Id: References: To: Warner Losh X-Mailer: Apple Mail (2.1283) Cc: freebsd-arm@freebsd.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Jan 2013 17:55:37 -0000 On Jan 25, 2013, at 2:09 PM, Warner Losh wrote: > > On Jan 25, 2013, at 2:05 AM, Ganbold Tsagaankhuu wrote: > >> On Fri, Jan 25, 2013 at 4:18 PM, XiaoQI Ge wrote: >>> I've just bought an CubieBoard, but when I searched the httpXXX,found >>> there was not any materials about CubieBoard, and I just want ask how to >>> compile the IMG for Freebsd, espically on the ubldr part >> >> You have to prepare SD card with special layout like >> http://linux-sunxi.org/U-Boot. >> (You can also use SD card which was prepared for linux, just >> remove/rename uImage) >> >> Once SD card is ready make sure you have xdev tools built. >> Make sure you have CURRENT machine with source. >> Tim's script also require xdev tools and you can build it like: >> >> cd /usr/src >> make xdev XDEV=arm XDEV_ARCH=arm > > shouldn't that be XDEV_ARCH=armv6? Doesn't actually matter. My scripts only use the xdev tools for building boot bits; the arm toolchain works fine for that. Kernel/world are built with standard buildworld/buildkernel targets. Tim