From owner-freebsd-hardware@FreeBSD.ORG Mon Apr 15 11:06:44 2013 Return-Path: Delivered-To: freebsd-hardware@FreeBSD.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 4A8EA95F for ; Mon, 15 Apr 2013 11:06:44 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) by mx1.freebsd.org (Postfix) with ESMTP id 23D5579B for ; Mon, 15 Apr 2013 11:06:44 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.6/8.14.6) with ESMTP id r3FB6iET015098 for ; Mon, 15 Apr 2013 11:06:44 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.6/8.14.6/Submit) id r3FB6hNU015096 for freebsd-hardware@FreeBSD.org; Mon, 15 Apr 2013 11:06:43 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 15 Apr 2013 11:06:43 GMT Message-Id: <201304151106.r3FB6hNU015096@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-hardware@FreeBSD.org Subject: Current problem reports assigned to freebsd-hardware@FreeBSD.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 15 Apr 2013 11:06:44 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- f kern/156241 hardware [mfi] 'zfs send' does not prevents disks to suspend if 1 problem total. From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 13:57:41 2013 Return-Path: Delivered-To: freebsd-hardware@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 30D79DC8; Tue, 16 Apr 2013 13:57:41 +0000 (UTC) (envelope-from willy@Offermans.Rompen.nl) Received: from cpsmtpb-ews07.kpnxchange.com (cpsmtpb-ews07.kpnxchange.com [213.75.39.10]) by mx1.freebsd.org (Postfix) with ESMTP id 98179D9C; Tue, 16 Apr 2013 13:57:34 +0000 (UTC) Received: from cpsps-ews11.kpnxchange.com ([10.94.84.178]) by cpsmtpb-ews07.kpnxchange.com with Microsoft SMTPSVC(7.5.7601.17514); Tue, 16 Apr 2013 15:56:23 +0200 Received: from CPSMTPM-CMT101.kpnxchange.com ([195.121.3.17]) by cpsps-ews11.kpnxchange.com with Microsoft SMTPSVC(7.5.7601.17514); Tue, 16 Apr 2013 15:56:23 +0200 Received: from sun.offermans.rompen.nl ([77.170.60.162]) by CPSMTPM-CMT101.kpnxchange.com with Microsoft SMTPSVC(7.0.6002.18264); Tue, 16 Apr 2013 15:56:22 +0200 Received: from squid (squid.vpn.offrom.nl [10.168.0.72]) by sun.offermans.rompen.nl (8.14.5/8.14.4) with ESMTP id r3GDuMPg025682; Tue, 16 Apr 2013 15:56:22 +0200 (CEST) (envelope-from willy@vpn.offrom.nl) Received: from willy by squid with local (Exim 4.72) (envelope-from ) id 1US6Mv-0007Bb-N6; Tue, 16 Apr 2013 15:56:21 +0200 Date: Tue, 16 Apr 2013 15:56:21 +0200 From: Willy Offermans To: freebsd-hardware@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: control of order of inet devices Message-ID: <20130416135621.GE3286@vpn.offrom.nl> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.20 (2009-06-14) X-OriginalArrivalTime: 16 Apr 2013 13:56:22.0655 (UTC) FILETIME=[2DBD38F0:01CE3AAA] X-RcptDomain: FreeBSD.ORG X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Willy@Offermans.Rompen.nl List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 13:57:41 -0000 Dear FreeBSD friends, How can I control the order of the network devices in FreeBSD. For example, the command ifconfig lists the network devices: pcn0: flags=8802 metric 0 mtu 1500 options=80000 ether 00:0c:46:ea:2b:32 nd6 options=29 media: Ethernet 100baseFX status: no carrier rl0: flags=8843 metric 0 mtu 1500 options=2008 ether 00:11:6b:99:7c:5a inet XXX.XXX.24.4 netmask 0xffffff80 broadcast 137.226.24.127 inet6 fe80::211:6bff:fe99:7c5a%rl0 prefixlen 64 scopeid 0x4 nd6 options=29 media: Ethernet autoselect (100baseTX ) status: active nfe0: flags=8802 metric 0 mtu 1500 options=82008 ether 00:1b:fc:df:a1:33 nd6 options=29 media: Ethernet autoselect (none) status: no carrier plip0: flags=8810 metric 0 mtu 1500 nd6 options=29 lo0: flags=8049 metric 0 mtu 16384 options=600003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet 127.0.0.1 netmask 0xff000000 nd6 options=21 tap0: flags=8843 metric 0 mtu 1500 options=80000 ether 00:22:19:10:8d:bb inet XXX.XXX.24.19 netmask 0xffffffff broadcast 137.226.24.19 inet6 fe80::2bd:83ff:fe68:7200%tap0 prefixlen 64 scopeid 0x8 nd6 options=21 media: Ethernet autoselect status: no carrier pcn0 being first. However, I would like tap0 being first and of course without any output ordering trick. -- Met vriendelijke groeten, With kind regards, Mit freundlichen Gruessen, De jrus wah, Wiel ************************************* W.K. Offermans Home: +31 45 544 49 44 Mobile: +31 681 15 87 68 e-mail: Willy@Offermans.Rompen.nl Powered by .... (__) \\\'',) \/ \ ^ .\._/_) www.FreeBSD.org From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 15:44:20 2013 Return-Path: Delivered-To: freebsd-hardware@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id DDF59EC0; Tue, 16 Apr 2013 15:44:20 +0000 (UTC) (envelope-from brooks@lor.one-eyed-alien.net) Received: from lor.one-eyed-alien.net (lor.one-eyed-alien.net [69.66.77.232]) by mx1.freebsd.org (Postfix) with ESMTP id 8767126E; Tue, 16 Apr 2013 15:44:19 +0000 (UTC) Received: from lor.one-eyed-alien.net (localhost [127.0.0.1]) by lor.one-eyed-alien.net (8.14.5/8.14.5) with ESMTP id r3GFiNL6014246; Tue, 16 Apr 2013 10:44:24 -0500 (CDT) (envelope-from brooks@lor.one-eyed-alien.net) Received: (from brooks@localhost) by lor.one-eyed-alien.net (8.14.5/8.14.5/Submit) id r3GFiNaa014245; Tue, 16 Apr 2013 10:44:23 -0500 (CDT) (envelope-from brooks) Date: Tue, 16 Apr 2013 10:44:23 -0500 From: Brooks Davis To: Willy Offermans Subject: Re: control of order of inet devices Message-ID: <20130416154423.GD98205@lor.one-eyed-alien.net> References: <20130416135621.GE3286@vpn.offrom.nl> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="ZJcv+A0YCCLh2VIg" Content-Disposition: inline In-Reply-To: <20130416135621.GE3286@vpn.offrom.nl> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-current@FreeBSD.ORG, freebsd-hardware@FreeBSD.ORG X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 15:44:20 -0000 --ZJcv+A0YCCLh2VIg Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Apr 16, 2013 at 03:56:21PM +0200, Willy Offermans wrote: > Dear FreeBSD friends, >=20 > How can I control the order of the network devices in FreeBSD. >=20 > For example, the command ifconfig lists the network devices: >=20 > pcn0: flags=3D8802 metric 0 mtu 1500 > options=3D80000 > ether 00:0c:46:ea:2b:32 > nd6 options=3D29 > media: Ethernet 100baseFX > status: no carrier > rl0: flags=3D8843 metric 0 mtu 15= 00 > options=3D2008 > ether 00:11:6b:99:7c:5a > inet XXX.XXX.24.4 netmask 0xffffff80 broadcast 137.226.24.127 > inet6 fe80::211:6bff:fe99:7c5a%rl0 prefixlen 64 scopeid 0x4=20 > nd6 options=3D29 > media: Ethernet autoselect (100baseTX ) > status: active > nfe0: flags=3D8802 metric 0 mtu 1500 > options=3D82008 > ether 00:1b:fc:df:a1:33 > nd6 options=3D29 > media: Ethernet autoselect (none) > status: no carrier > plip0: flags=3D8810 metric 0 mtu 1500 > nd6 options=3D29 > lo0: flags=3D8049 metric 0 mtu 16384 > options=3D600003 > inet6 ::1 prefixlen 128=20 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7=20 > inet 127.0.0.1 netmask 0xff000000=20 > nd6 options=3D21 > tap0: flags=3D8843 metric 0 mtu 1= 500 > options=3D80000 > ether 00:22:19:10:8d:bb > inet XXX.XXX.24.19 netmask 0xffffffff broadcast 137.226.24.19 > inet6 fe80::2bd:83ff:fe68:7200%tap0 prefixlen 64 scopeid 0x8=20 > nd6 options=3D21 > media: Ethernet autoselect > status: no carrier >=20 > pcn0 being first. However, I would like tap0 being first and of course > without any output ordering trick. The order is dictated by the order the drivers are probed by the kernel. When the devices are created they are added to a linked list. There is no practical way to control the order and it has little or no effect. -- Brooks --ZJcv+A0YCCLh2VIg Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (FreeBSD) iD8DBQFRbXHWXY6L6fI4GtQRAnu9AKCAx1z0Ns3LdGZb+OEthXHUXoubAQCgr0YG ba2xOdoX8hi1TH33bqevAFE= =vPsr -----END PGP SIGNATURE----- --ZJcv+A0YCCLh2VIg-- From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 17:08:02 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 006DB6AC; Tue, 16 Apr 2013 17:08:01 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-wi0-x22a.google.com (mail-wi0-x22a.google.com [IPv6:2a00:1450:400c:c05::22a]) by mx1.freebsd.org (Postfix) with ESMTP id 4E20A952; Tue, 16 Apr 2013 17:08:01 +0000 (UTC) Received: by mail-wi0-f170.google.com with SMTP id l13so154924wie.3 for ; Tue, 16 Apr 2013 10:08:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:x-received:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=o6mYr4omhYanS6EhxL4GeiP9cOrlM4fyYQNUejFl46k=; b=qIZODIbRn81DPtrLbHUYEXGqy46fCr/ODex1Ug0zryP7By1qKUlI/V8ZbCbOwjuIdy SA1wgbgdmhUNXcIx+NSrAwzdBB1ndMbUJGv9sn+FKcybav6gy7WhlabKe/FPNTt5D7Ua o8CNaNhWWVoMvGQbbMOoUETipFjdxtfYFp7d+IEb/xQsyDQGo9eW+nhByHQl+9rhYL1s o2BdBASPmgu+ct79L2lbrCKFy2785DKX8H3Df7+uSmTXVdGp2fdvXpPcvQcltjJ2K7qD 9Z5Y8bvBdE3v68gQRJ1OW9j2VEl1WBYIeQBltivsXs6b3SjcUgFoMX7jFBPG2B5M+Wkx yElA== MIME-Version: 1.0 X-Received: by 10.180.73.173 with SMTP id m13mr5325477wiv.27.1366132080448; Tue, 16 Apr 2013 10:08:00 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.217.88.129 with HTTP; Tue, 16 Apr 2013 10:08:00 -0700 (PDT) In-Reply-To: <20130416154423.GD98205@lor.one-eyed-alien.net> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> Date: Tue, 16 Apr 2013 10:08:00 -0700 X-Google-Sender-Auth: YqQwRzw8aKlSYfyNIx9mbO0IPSE Message-ID: Subject: Re: control of order of inet devices From: Adrian Chadd To: Brooks Davis Content-Type: text/plain; charset=ISO-8859-1 Cc: Willy Offermans , freebsd-current@freebsd.org, freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 17:08:02 -0000 Since people keep asking about this; maybe it's time we added a hint to the bus code that allows for the unit to be set based on the pci bus / slot / etc. Adrian From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 18:36:15 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id B7943CFB; Tue, 16 Apr 2013 18:36:15 +0000 (UTC) (envelope-from brooks@lor.one-eyed-alien.net) Received: from lor.one-eyed-alien.net (lor.one-eyed-alien.net [69.66.77.232]) by mx1.freebsd.org (Postfix) with ESMTP id 1020AE69; Tue, 16 Apr 2013 18:36:14 +0000 (UTC) Received: from lor.one-eyed-alien.net (localhost [127.0.0.1]) by lor.one-eyed-alien.net (8.14.5/8.14.5) with ESMTP id r3GIaJGc015834; Tue, 16 Apr 2013 13:36:19 -0500 (CDT) (envelope-from brooks@lor.one-eyed-alien.net) Received: (from brooks@localhost) by lor.one-eyed-alien.net (8.14.5/8.14.5/Submit) id r3GIaIP2015833; Tue, 16 Apr 2013 13:36:18 -0500 (CDT) (envelope-from brooks) Date: Tue, 16 Apr 2013 13:36:18 -0500 From: Brooks Davis To: Adrian Chadd Subject: Re: control of order of inet devices Message-ID: <20130416183618.GG98205@lor.one-eyed-alien.net> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="L1c6L/cjZjI9d0Eq" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.21 (2010-09-15) Cc: Willy Offermans , freebsd-current@freebsd.org, freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 18:36:15 -0000 --L1c6L/cjZjI9d0Eq Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Apr 16, 2013 at 10:08:00AM -0700, Adrian Chadd wrote: > Since people keep asking about this; maybe it's time we added a hint > to the bus code that allows for the unit to be set based on the pci > bus / slot / etc. I don't see how that would address Willy's request. Neither the unit number or the if_index of an interface effects its order in getifaddrs() output. With modern bus hierarchies, you probably don't want to use the unit anyway as it loses too much information. Some along the lines of Fedora's Consistent Network Device Naming would likely be more useful. That would be fairly easy to implement. -- Brooks --L1c6L/cjZjI9d0Eq Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (FreeBSD) iD8DBQFRbZoiXY6L6fI4GtQRAnuJAJ9AU4LWOJ9Fx2XcFfXr3O6VznsC3ACdHU8N z43Dv00XJBwtbzvt8wohuyQ= =hIjv -----END PGP SIGNATURE----- --L1c6L/cjZjI9d0Eq-- From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 19:03:21 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id D6161B8E; Tue, 16 Apr 2013 19:03:21 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-vc0-f173.google.com (mail-vc0-f173.google.com [209.85.220.173]) by mx1.freebsd.org (Postfix) with ESMTP id 59222100F; Tue, 16 Apr 2013 19:03:21 +0000 (UTC) Received: by mail-vc0-f173.google.com with SMTP id gf12so697024vcb.32 for ; Tue, 16 Apr 2013 12:03:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:x-received:in-reply-to:references:date:message-id :subject:from:to:cc:content-type; bh=wmmhsbq4zCPOEQHAmFllhh8bDk6Js4Md8hhhw5uG+bc=; b=zwteLh/xJtZjLMrZb2qtQcdgxGxhjkAeARlmySjVEDztVI67tVYt4HKetRCmt4PTU3 o+ig//DMV8MTdVtRXMX7BPcPWArPbJqGXp1ndXO4p2sPVUQW+aATAlsMMbSKmC4GwVDR kSdqBwire5y4d/MvBqX8Eplk1cRZoLrrWBazOnUWpB9lE0VJ/CWwjvji3oXXdzbJR+TL XQuefbWhNwF5QLFy9xj0zspvf67I0+QNuy6awiFC4BiiwqZPgU02KyEI0ApP+nj9lLVN pw72oEYsk2zfWxXdD/jePMzFlD4VdETNiQG3Q4t8dQWkOFZPaF+ONXUX2L/Nek0LcyAg l1sg== MIME-Version: 1.0 X-Received: by 10.52.249.105 with SMTP id yt9mr2134726vdc.86.1366138994830; Tue, 16 Apr 2013 12:03:14 -0700 (PDT) Received: by 10.58.132.203 with HTTP; Tue, 16 Apr 2013 12:03:14 -0700 (PDT) In-Reply-To: <20130416183618.GG98205@lor.one-eyed-alien.net> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> <20130416183618.GG98205@lor.one-eyed-alien.net> Date: Tue, 16 Apr 2013 12:03:14 -0700 Message-ID: Subject: Re: control of order of inet devices From: Mehmet Erol Sanliturk To: Brooks Davis Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: Adrian Chadd , freebsd-current , Willy Offermans , "freebsd-hardware@freebsd.org" X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 19:03:21 -0000 On Tue, Apr 16, 2013 at 11:36 AM, Brooks Davis wrote: > On Tue, Apr 16, 2013 at 10:08:00AM -0700, Adrian Chadd wrote: > > Since people keep asking about this; maybe it's time we added a hint > > to the bus code that allows for the unit to be set based on the pci > > bus / slot / etc. > > I don't see how that would address Willy's request. Neither the unit > number or the if_index of an interface effects its order in > getifaddrs() output. > > With modern bus hierarchies, you probably don't want to use the unit > anyway as it loses too much information. Some along the lines of > Fedora's Consistent Network Device Naming would likely be more useful. > That would be fairly easy to implement. > > -- Brooks > Fedora is using eth0 , ... , eth9 , but FreeBSD is using em* , re* , .. names which is much better than Fedora ( or similar distributions ) approach . In eth0 , ... , usage , it is necessary to record MAC addresses of the NIC units ( because any name is not displayed like FreeBSD ) BEFORE starting an installation to isolate which one is referenced : Even this is not very useful sometimes because I am seeing they ( different Linux distributions ) are reporting MAC addresses differently for some NIC units , and no one of them is identical to others to number eth with existing NIC units ( for example , eth0 is not used for the same NIC by all the distributions , i.e. , there is no any standard numbering scheme ) . FreeBSD is using names ( Realtek , Intel , etc with other information also ) which is very easy to understand which NIC unit is referenced . I think , in FreeBSD , the problem may occur when all of the NIC units are the same model . For such cases , there is a necessity to display also slot / port information ( in that case MAC address is not showing slot / port information ) . Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 19:06:30 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 6AD26D29; Tue, 16 Apr 2013 19:06:30 +0000 (UTC) (envelope-from brooks@lor.one-eyed-alien.net) Received: from lor.one-eyed-alien.net (lor.one-eyed-alien.net [69.66.77.232]) by mx1.freebsd.org (Postfix) with ESMTP id BECBE1045; Tue, 16 Apr 2013 19:06:29 +0000 (UTC) Received: from lor.one-eyed-alien.net (localhost [127.0.0.1]) by lor.one-eyed-alien.net (8.14.5/8.14.5) with ESMTP id r3GJ6YiH016047; Tue, 16 Apr 2013 14:06:34 -0500 (CDT) (envelope-from brooks@lor.one-eyed-alien.net) Received: (from brooks@localhost) by lor.one-eyed-alien.net (8.14.5/8.14.5/Submit) id r3GJ6YUk016046; Tue, 16 Apr 2013 14:06:34 -0500 (CDT) (envelope-from brooks) Date: Tue, 16 Apr 2013 14:06:34 -0500 From: Brooks Davis To: Mehmet Erol Sanliturk Subject: Re: control of order of inet devices Message-ID: <20130416190634.GH98205@lor.one-eyed-alien.net> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> <20130416183618.GG98205@lor.one-eyed-alien.net> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="NzX0AQGjRQPusK/O" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.21 (2010-09-15) Cc: Adrian Chadd , freebsd-current , Willy Offermans , "freebsd-hardware@freebsd.org" X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 19:06:30 -0000 --NzX0AQGjRQPusK/O Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Apr 16, 2013 at 12:03:14PM -0700, Mehmet Erol Sanliturk wrote: > On Tue, Apr 16, 2013 at 11:36 AM, Brooks Davis wrote: >=20 > > On Tue, Apr 16, 2013 at 10:08:00AM -0700, Adrian Chadd wrote: > > > Since people keep asking about this; maybe it's time we added a hint > > > to the bus code that allows for the unit to be set based on the pci > > > bus / slot / etc. > > > > I don't see how that would address Willy's request. Neither the unit > > number or the if_index of an interface effects its order in > > getifaddrs() output. > > > > With modern bus hierarchies, you probably don't want to use the unit > > anyway as it loses too much information. Some along the lines of > > Fedora's Consistent Network Device Naming would likely be more useful. > > That would be fairly easy to implement. > > > > -- Brooks > > >=20 >=20 > Fedora is using eth0 , ... , eth9 , but FreeBSD is using em* , re* , .. > names which is much better than Fedora ( or similar distributions ) > approach . As of Fedora 16 the default was changed: http://docs.fedoraproject.org/en-US/Fedora/16/html/System_Administrators_Gu= ide/appe-Consistent_Network_Device_Naming.html -- Brooks --NzX0AQGjRQPusK/O Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (FreeBSD) iD4DBQFRbaE5XY6L6fI4GtQRAibVAJdYxjwSha0r7Iwb/y3DVD40VCN1AKCd94Gs NRQ0i9nK9GPVz6PAQoAwEw== =e7T4 -----END PGP SIGNATURE----- --NzX0AQGjRQPusK/O-- From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 16 20:04:47 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 5C3777CC; Tue, 16 Apr 2013 20:04:47 +0000 (UTC) (envelope-from dim@FreeBSD.org) Received: from tensor.andric.com (tensor.andric.com [IPv6:2001:7b8:3a7:1:2d0:b7ff:fea0:8c26]) by mx1.freebsd.org (Postfix) with ESMTP id 18C0E1459; Tue, 16 Apr 2013 20:04:47 +0000 (UTC) Received: from [IPv6:2001:7b8:3a7::b037:d3c5:d0df:2e6b] (unknown [IPv6:2001:7b8:3a7:0:b037:d3c5:d0df:2e6b]) (using TLSv1 with cipher AES128-SHA (128/128 bits)) (No client certificate requested) by tensor.andric.com (Postfix) with ESMTPSA id 8E5BF5C44; Tue, 16 Apr 2013 22:04:45 +0200 (CEST) Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 6.3 \(1503\)) Subject: Re: control of order of inet devices From: Dimitry Andric In-Reply-To: <20130416183618.GG98205@lor.one-eyed-alien.net> Date: Tue, 16 Apr 2013 22:04:38 +0200 Content-Transfer-Encoding: 7bit Message-Id: References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> <20130416183618.GG98205@lor.one-eyed-alien.net> To: Brooks Davis X-Mailer: Apple Mail (2.1503) Cc: Adrian Chadd , freebsd-current@freebsd.org, Willy Offermans , freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 16 Apr 2013 20:04:47 -0000 On Apr 16, 2013, at 20:36, Brooks Davis wrote: > On Tue, Apr 16, 2013 at 10:08:00AM -0700, Adrian Chadd wrote: >> Since people keep asking about this; maybe it's time we added a hint >> to the bus code that allows for the unit to be set based on the pci >> bus / slot / etc. > > I don't see how that would address Willy's request. Neither the unit > number or the if_index of an interface effects its order in > getifaddrs() output. > > With modern bus hierarchies, you probably don't want to use the unit > anyway as it loses too much information. Some along the lines of > Fedora's Consistent Network Device Naming would likely be more useful. > That would be fairly easy to implement. I've been using the ifconfig_XXX_name setting in rc.conf for years now, which at works fine, at least for me. E.g.: ifconfig_em0_name="if_ext" ifconfig_em1_name="if_lan" ifconfig_ral0_name="if_wifi" However, if bus enumeration would randomly swap em0 and em1, for example, this would break down. Linux usually just fixes a specific interface name to a hardware address, e.g. /etc/sysconfig/network-scripts/ifcfg-eth0 on a CentOS box has: DEVICE="eth0" BOOTPROTO="dhcp" HWADDR="00:0C:29:65:E4:E3" ... From owner-freebsd-hardware@FreeBSD.ORG Wed Apr 17 09:15:22 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 080B0EDD; Wed, 17 Apr 2013 09:15:22 +0000 (UTC) (envelope-from willy@Offermans.Rompen.nl) Received: from cpsmtpb-ews02.kpnxchange.com (cpsmtpb-ews02.kpnxchange.com [213.75.39.5]) by mx1.freebsd.org (Postfix) with ESMTP id 6A8D175E; Wed, 17 Apr 2013 09:15:20 +0000 (UTC) Received: from cpsps-ews08.kpnxchange.com ([10.94.84.175]) by cpsmtpb-ews02.kpnxchange.com with Microsoft SMTPSVC(7.5.7601.17514); Wed, 17 Apr 2013 11:14:10 +0200 Received: from CPSMTPM-CMT101.kpnxchange.com ([195.121.3.17]) by cpsps-ews08.kpnxchange.com with Microsoft SMTPSVC(7.5.7601.17514); Wed, 17 Apr 2013 11:14:10 +0200 Received: from sun.offermans.rompen.nl ([77.170.60.162]) by CPSMTPM-CMT101.kpnxchange.com with Microsoft SMTPSVC(7.0.6002.18264); Wed, 17 Apr 2013 11:14:09 +0200 Received: from squid (squid.vpn.offrom.nl [10.168.0.72]) by sun.offermans.rompen.nl (8.14.5/8.14.4) with ESMTP id r3H9E8n1032889; Wed, 17 Apr 2013 11:14:09 +0200 (CEST) (envelope-from willy@vpn.offrom.nl) Received: from willy by squid with local (Exim 4.72) (envelope-from ) id 1USORM-00062i-Bh; Wed, 17 Apr 2013 11:14:08 +0200 Date: Wed, 17 Apr 2013 11:14:08 +0200 From: Willy Offermans To: Brooks Davis Subject: Re: control of order of inet devices Message-ID: <20130417091408.GG3480@vpn.offrom.nl> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20130416154423.GD98205@lor.one-eyed-alien.net> User-Agent: Mutt/1.5.20 (2009-06-14) X-OriginalArrivalTime: 17 Apr 2013 09:14:09.0957 (UTC) FILETIME=[EB7A4D50:01CE3B4B] X-RcptDomain: freebsd.org Cc: Willy Offermans , freebsd-current@freebsd.org, freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: Willy@Offermans.Rompen.nl List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 17 Apr 2013 09:15:22 -0000 Hello Brooks, On Tue, Apr 16, 2013 at 10:44:23AM -0500, Brooks Davis wrote: > On Tue, Apr 16, 2013 at 03:56:21PM +0200, Willy Offermans wrote: > > Dear FreeBSD friends, > > > > How can I control the order of the network devices in FreeBSD. > > > > For example, the command ifconfig lists the network devices: > > > > pcn0: flags=8802 metric 0 mtu 1500 > > options=80000 > > ether 00:0c:46:ea:2b:32 > > nd6 options=29 > > media: Ethernet 100baseFX > > status: no carrier > > rl0: flags=8843 metric 0 mtu 1500 > > options=2008 > > ether 00:11:6b:99:7c:5a > > inet XXX.XXX.24.4 netmask 0xffffff80 broadcast 137.226.24.127 > > inet6 fe80::211:6bff:fe99:7c5a%rl0 prefixlen 64 scopeid 0x4 > > nd6 options=29 > > media: Ethernet autoselect (100baseTX ) > > status: active > > nfe0: flags=8802 metric 0 mtu 1500 > > options=82008 > > ether 00:1b:fc:df:a1:33 > > nd6 options=29 > > media: Ethernet autoselect (none) > > status: no carrier > > plip0: flags=8810 metric 0 mtu 1500 > > nd6 options=29 > > lo0: flags=8049 metric 0 mtu 16384 > > options=600003 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 > > inet 127.0.0.1 netmask 0xff000000 > > nd6 options=21 > > tap0: flags=8843 metric 0 mtu 1500 > > options=80000 > > ether 00:22:19:10:8d:bb > > inet XXX.XXX.24.19 netmask 0xffffffff broadcast 137.226.24.19 > > inet6 fe80::2bd:83ff:fe68:7200%tap0 prefixlen 64 scopeid 0x8 > > nd6 options=21 > > media: Ethernet autoselect > > status: no carrier > > > > pcn0 being first. However, I would like tap0 being first and of course > > without any output ordering trick. > > The order is dictated by the order the drivers are probed by the kernel. > When the devices are created they are added to a linked list. There is > no practical way to control the order and it has little or no effect. > > -- Brooks This is what I read in some of the articles or handbook as well. Can I reorder this linked list? Can I control the order by creating the kernel and reordering the inclusion of the device drivers? I am aware that the request sounds silly, but I have a third party program which checks its licence against the first inet device. Since I have added a new inet controller, the sequence has changed. Of course I ask for a new licence, but they want to charge me for that and I do not see any reason for that. -- Met vriendelijke groeten, With kind regards, Mit freundlichen Gruessen, Willy ************************************* W.K. Offermans Home: +31 45 544 49 44 Mobile: +31 681 15 87 68 e-mail: Willy@Offermans.Rompen.nl Powered by .... (__) \\\'',) \/ \ ^ .\._/_) www.FreeBSD.org From owner-freebsd-hardware@FreeBSD.ORG Wed Apr 17 14:06:15 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id B6CDC8FD for ; Wed, 17 Apr 2013 14:06:15 +0000 (UTC) (envelope-from freebsd@growveg.net) Received: from smtp1.servage.net (smtp1.servage.net [IPv6:2a01:3b0:1:fb:1::2001]) by mx1.freebsd.org (Postfix) with ESMTP id 841CCAEC for ; Wed, 17 Apr 2013 14:06:15 +0000 (UTC) Received: from unknown (roobarb.growveg.org [62.49.247.174]) (using TLSv1 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by smtp1.servage.net (Postfix) with ESMTPSA id C0C37B43E7 for ; Wed, 17 Apr 2013 14:23:01 +0000 (UTC) Date: Wed, 17 Apr 2013 15:06:10 +0100 From: John To: freebsd-hardware@freebsd.org Subject: http://www.freebsd.org/cgi/query-pr.cgi?pr=171835 Message-ID: <20130417150610.000018a5@unknown> X-Mailer: Claws Mail 3.8.1 (GTK+ 2.16.6; i586-pc-mingw32msvc) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 17 Apr 2013 14:06:15 -0000 Hello list, Is there any liklihood of http://www.freebsd.org/cgi/query-pr.cgi?pr=171835 being fixed? It has been open since 21st September 2012. thanks, -- John From owner-freebsd-hardware@FreeBSD.ORG Wed Apr 17 17:11:08 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 8A4E5C80 for ; Wed, 17 Apr 2013 17:11:08 +0000 (UTC) (envelope-from freebsd@growveg.net) Received: from smtp1.servage.net (smtp1.servage.net [IPv6:2a01:3b0:1:fb:1::2001]) by mx1.freebsd.org (Postfix) with ESMTP id 55C3F74D for ; Wed, 17 Apr 2013 17:11:08 +0000 (UTC) Received: from potato.growveg.org (growveg-1-pt.tunnel.tserv11.ams1.ipv6.he.net [IPv6:2001:470:1f14:3d2::2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp1.servage.net (Postfix) with ESMTPSA id C7C50328BB for ; Wed, 17 Apr 2013 17:27:55 +0000 (UTC) Message-ID: <516ED7A5.5000503@growveg.net> Date: Wed, 17 Apr 2013 18:11:01 +0100 From: John User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:17.0) Gecko/20130408 Thunderbird/17.0.5 MIME-Version: 1.0 To: freebsd-hardware@freebsd.org Subject: PERC SATA controller support X-Enigmail-Version: 1.5.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 17 Apr 2013 17:11:08 -0000 Hello list, I was wondering if anyone was running the following SATA controller hardware, and if they are, if it works/doesn't/had to sacrifice a chicken and chant before getting it to work: PERC S110 PERC H310 PERC H710 PERC H710p I think they're all with LSI chips. I aim to be running a freebsd-9.xR machine although I'm not averse to running -current if I need to. Have had a look at http://www.freebsd.org/releases/9.1R/hardware.html and though there's a few PERC controllers listed, these aren't. Googling shows a couple of messages stating success not with this exact hardware but only on 9.1 and only with a firmware update. thanks, -- John From owner-freebsd-hardware@FreeBSD.ORG Thu Apr 18 04:55:08 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id AACBF3EE; Thu, 18 Apr 2013 04:55:08 +0000 (UTC) (envelope-from swhetzel@gmail.com) Received: from mail-ie0-x22d.google.com (mail-ie0-x22d.google.com [IPv6:2607:f8b0:4001:c03::22d]) by mx1.freebsd.org (Postfix) with ESMTP id 7785EA68; Thu, 18 Apr 2013 04:55:08 +0000 (UTC) Received: by mail-ie0-f173.google.com with SMTP id k5so2820856iea.18 for ; Wed, 17 Apr 2013 21:55:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:x-received:in-reply-to:references:date:message-id :subject:from:to:cc:content-type; bh=76FX2L3sai35IuqA6aXzIvIij1D6A2Qoud/nICSaSeE=; b=f53SX2tkMQhqAGx9OkzYZJLaycOphg7kBD/DeSMM6OfWTu9bQexTjpFDjhEAJeWgMq LXOkhduVWh4j+m9CmzCbNPV4uasTSTRYDWOxwrlMfquql5lTC8SZu+MkL8z4DKOa4pa0 iTICVUCFIRdhgNhpw458AECiRe0D6bxFqiOIoXQROb7dqN6HrkzIogwEch8PTG1LT9Xd coPfuN99ooejsckOPHdtOKg3yyfPL/fDL0FLpFVZWnHvMMwekrqGSDLNm9LyLEu0+M1a MfTn7xa4KADF8weoL4xQaJz8KhdOO7mUQbTKhZ/YZhczScpXboSonCAGtR1k0mzca/sb FlYQ== MIME-Version: 1.0 X-Received: by 10.50.20.69 with SMTP id l5mr6029435ige.106.1366260908125; Wed, 17 Apr 2013 21:55:08 -0700 (PDT) Received: by 10.50.57.84 with HTTP; Wed, 17 Apr 2013 21:55:07 -0700 (PDT) In-Reply-To: <20130417091408.GG3480@vpn.offrom.nl> References: <20130416135621.GE3286@vpn.offrom.nl> <20130416154423.GD98205@lor.one-eyed-alien.net> <20130417091408.GG3480@vpn.offrom.nl> Date: Wed, 17 Apr 2013 23:55:07 -0500 Message-ID: Subject: Re: control of order of inet devices From: Scot Hetzel To: Willy@offermans.rompen.nl Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: FreeBSD Current , freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 18 Apr 2013 04:55:08 -0000 On Wed, Apr 17, 2013 at 4:14 AM, Willy Offermans wrote: > Hello Brooks, > > On Tue, Apr 16, 2013 at 10:44:23AM -0500, Brooks Davis wrote: > > On Tue, Apr 16, 2013 at 03:56:21PM +0200, Willy Offermans wrote: > > > Dear FreeBSD friends, > > > > > > How can I control the order of the network devices in FreeBSD. > > > > > > For example, the command ifconfig lists the network devices: > > > > > > pcn0: flags=8802 metric 0 mtu 1500 > > > options=80000 > > > ether 00:0c:46:ea:2b:32 > > > nd6 options=29 > > > media: Ethernet 100baseFX > > > status: no carrier > > > rl0: flags=8843 metric 0 mtu > 1500 > > > options=2008 > > > ether 00:11:6b:99:7c:5a > > > inet XXX.XXX.24.4 netmask 0xffffff80 broadcast 137.226.24.127 > > > inet6 fe80::211:6bff:fe99:7c5a%rl0 prefixlen 64 scopeid 0x4 > > > nd6 options=29 > > > media: Ethernet autoselect (100baseTX ) > > > status: active > > > nfe0: flags=8802 metric 0 mtu 1500 > > > options=82008 > > > ether 00:1b:fc:df:a1:33 > > > nd6 options=29 > > > media: Ethernet autoselect (none) > > > status: no carrier > > > plip0: flags=8810 metric 0 mtu 1500 > > > nd6 options=29 > > > lo0: flags=8049 metric 0 mtu 16384 > > > options=600003 > > > inet6 ::1 prefixlen 128 > > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 > > > inet 127.0.0.1 netmask 0xff000000 > > > nd6 options=21 > > > tap0: flags=8843 metric 0 mtu > 1500 > > > options=80000 > > > ether 00:22:19:10:8d:bb > > > inet XXX.XXX.24.19 netmask 0xffffffff broadcast 137.226.24.19 > > > inet6 fe80::2bd:83ff:fe68:7200%tap0 prefixlen 64 scopeid 0x8 > > > nd6 options=21 > > > media: Ethernet autoselect > > > status: no carrier > > > > > > pcn0 being first. However, I would like tap0 being first and of course > > > without any output ordering trick. > > > > The order is dictated by the order the drivers are probed by the kernel. > > When the devices are created they are added to a linked list. There is > > no practical way to control the order and it has little or no effect. > > > > -- Brooks > > This is what I read in some of the articles or handbook as well. Can I > reorder this linked list? Can I control the order by creating the kernel > and reordering the inclusion of the device drivers? > > I am aware that the request sounds silly, but I have a third party program > which checks its licence against the first inet device. Since I have added > a new inet controller, the sequence has changed. Of course I ask for a new > licence, but they want to charge me for that and I do not see any reason > for that. > What information did you give them when you registered that software? Was it just the MAC address of tap0? If it was just the MAC address of tap0, you could try changing the MAC address of pcn0 to the MAC address of tap0: echo 'ifconfig pcn0 ether 00:22:19:10:8d:bb' >/etc/start_if.pcn0 echo 'ifconfig tap0 ether 00:22:19:10:8d:bc' >/etc/start_if.tap0 From owner-freebsd-hardware@FreeBSD.ORG Thu Apr 18 19:44:00 2013 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 9FA0BF14 for ; Thu, 18 Apr 2013 19:44:00 +0000 (UTC) (envelope-from peter@rulingia.com) Received: from vps.rulingia.com (host-122-100-2-194.octopus.com.au [122.100.2.194]) by mx1.freebsd.org (Postfix) with ESMTP id 3C595183B for ; Thu, 18 Apr 2013 19:43:59 +0000 (UTC) Received: from server.rulingia.com (c220-239-237-213.belrs5.nsw.optusnet.com.au [220.239.237.213]) by vps.rulingia.com (8.14.5/8.14.5) with ESMTP id r3IJhoZM009825 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Fri, 19 Apr 2013 05:43:50 +1000 (EST) (envelope-from peter@rulingia.com) X-Bogosity: Ham, spamicity=0.000000 Received: from server.rulingia.com (localhost.rulingia.com [127.0.0.1]) by server.rulingia.com (8.14.5/8.14.5) with ESMTP id r3IJhjGC082298 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 19 Apr 2013 05:43:45 +1000 (EST) (envelope-from peter@server.rulingia.com) Received: (from peter@localhost) by server.rulingia.com (8.14.5/8.14.5/Submit) id r3IJhirE082294; Fri, 19 Apr 2013 05:43:44 +1000 (EST) (envelope-from peter) Date: Fri, 19 Apr 2013 05:43:43 +1000 From: Peter Jeremy To: John Subject: Re: http://www.freebsd.org/cgi/query-pr.cgi?pr=171835 Message-ID: <20130418194343.GD36189@server.rulingia.com> References: <20130417150610.000018a5@unknown> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="zYM0uCDKw75PZbzx" Content-Disposition: inline In-Reply-To: <20130417150610.000018a5@unknown> X-PGP-Key: http://www.rulingia.com/keys/peter.pgp User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-hardware@freebsd.org X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 18 Apr 2013 19:44:00 -0000 --zYM0uCDKw75PZbzx Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 2013-Apr-17 15:06:10 +0100, John wrote: >Is there any liklihood of >http://www.freebsd.org/cgi/query-pr.cgi?pr=3D171835 being fixed? It has >been open since 21st September 2012. Looking at the PR, the originator was going to try and reproduce the problem with 9.1RC but never followed up. If you can reproduce the problem with 9.1-RELEASE, I suggest you add a followup. --=20 Peter Jeremy --zYM0uCDKw75PZbzx Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (FreeBSD) iEYEARECAAYFAlFwTO8ACgkQ/opHv/APuIcKPwCgrMVnM/i5SyEF7N1Km4p3zZdj S4AAoJ6+KurQkKONeOX3hrAlX8VDgIw2 =OITR -----END PGP SIGNATURE----- --zYM0uCDKw75PZbzx--