From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 01:37:25 2013 Return-Path: Delivered-To: powerpc@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 44189F01; Thu, 3 Jan 2013 01:37:25 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by mx1.freebsd.org (Postfix) with ESMTP id 0349CE15; Thu, 3 Jan 2013 01:37:24 +0000 (UTC) Received: from freebsd-current.sentex.ca (localhost [127.0.0.1]) by freebsd-current.sentex.ca (8.14.5/8.14.5) with ESMTP id r031bIXe061541; Wed, 2 Jan 2013 20:37:18 -0500 (EST) (envelope-from tinderbox@freebsd.org) Received: (from tinderbox@localhost) by freebsd-current.sentex.ca (8.14.5/8.14.5/Submit) id r031bIvP061529; Thu, 3 Jan 2013 01:37:18 GMT (envelope-from tinderbox@freebsd.org) Date: Thu, 3 Jan 2013 01:37:18 GMT Message-Id: <201301030137.r031bIvP061529@freebsd-current.sentex.ca> X-Authentication-Warning: freebsd-current.sentex.ca: tinderbox set sender to FreeBSD Tinderbox using -f Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Subject: [head tinderbox] failure on powerpc/powerpc Precedence: bulk X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 01:37:25 -0000 TB --- 2013-01-03 00:12:40 - tinderbox 2.10 running on freebsd-current.sentex.ca TB --- 2013-01-03 00:12:40 - FreeBSD freebsd-current.sentex.ca 8.3-PRERELEASE FreeBSD 8.3-PRERELEASE #0: Mon Mar 26 13:54:12 EDT 2012 des@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64 TB --- 2013-01-03 00:12:40 - starting HEAD tinderbox run for powerpc/powerpc TB --- 2013-01-03 00:12:40 - cleaning the object tree TB --- 2013-01-03 00:12:40 - /usr/local/bin/svn stat /src TB --- 2013-01-03 00:14:21 - At svn revision 244959 TB --- 2013-01-03 00:14:22 - building world TB --- 2013-01-03 00:14:22 - CROSS_BUILD_TESTING=YES TB --- 2013-01-03 00:14:22 - MAKEOBJDIRPREFIX=/obj TB --- 2013-01-03 00:14:22 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2013-01-03 00:14:22 - SRCCONF=/dev/null TB --- 2013-01-03 00:14:22 - TARGET=powerpc TB --- 2013-01-03 00:14:22 - TARGET_ARCH=powerpc TB --- 2013-01-03 00:14:22 - TZ=UTC TB --- 2013-01-03 00:14:22 - __MAKE_CONF=/dev/null TB --- 2013-01-03 00:14:22 - cd /src TB --- 2013-01-03 00:14:22 - /usr/bin/make -B buildworld >>> Building an up-to-date make(1) >>> World build started on Thu Jan 3 00:14:27 UTC 2013 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries [...] ranlib libllvmasmprinter.a ===> lib/clang/libllvmbitreader (all) c++ -O2 -pipe -I/src/lib/clang/libllvmbitreader/../../../contrib/llvm/include -I/src/lib/clang/libllvmbitreader/../../../contrib/llvm/tools/clang/include -I/src/lib/clang/libllvmbitreader/../../../contrib/llvm/lib/Bitcode/Reader -I. -I/src/lib/clang/libllvmbitreader/../../../contrib/llvm/../../lib/clang/include -DLLVM_ON_UNIX -DLLVM_ON_FREEBSD -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -fno-strict-aliasing -DLLVM_DEFAULT_TARGET_TRIPLE=\"powerpc-unknown-freebsd10.0\" -DLLVM_HOSTTRIPLE=\"powerpc-unknown-freebsd10.0\" -DDEFAULT_SYSROOT=\"\" -fstack-protector -fno-exceptions -fno-rtti -c /src/lib/clang/libllvmbitreader/../../../contrib/llvm/lib/Bitcode/Reader/BitcodeReader.cpp -o BitcodeReader.o /src/lib/clang/libllvmbitreader/../../../contrib/llvm/lib/Bitcode/Reader/BitcodeReader.cpp: In member function 'bool llvm::BitcodeReader::ParseFunctionBody(llvm::Function*)': /src/lib/clang/libllvmbitreader/../../../contrib/llvm/lib/Bitcode/Reader/BitcodeReader.cpp:1905: internal compiler error: Segmentation fault: 11 Please submit a full bug report, with preprocessed source if appropriate. See for instructions. *** [BitcodeReader.o] Error code 1 Stop in /src/lib/clang/libllvmbitreader. *** [all] Error code 1 Stop in /src/lib/clang. *** [all] Error code 1 Stop in /src/lib. *** [lib__L] Error code 1 Stop in /src. *** [libraries] Error code 1 Stop in /src. *** [_libraries] Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2013-01-03 01:37:18 - WARNING: /usr/bin/make returned exit code 1 TB --- 2013-01-03 01:37:18 - ERROR: failed to build world TB --- 2013-01-03 01:37:18 - 4087.23 user 492.52 system 5077.28 real http://tinderbox.freebsd.org/tinderbox-head-ss-build-HEAD-powerpc-powerpc.full From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 03:40:17 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id DACECC56 for ; Thu, 3 Jan 2013 03:40:17 +0000 (UTC) (envelope-from superbisquit@gmail.com) Received: from mail-ob0-f174.google.com (mail-ob0-f174.google.com [209.85.214.174]) by mx1.freebsd.org (Postfix) with ESMTP id 8B4E61F5 for ; Thu, 3 Jan 2013 03:40:17 +0000 (UTC) Received: by mail-ob0-f174.google.com with SMTP id ta14so13379448obb.19 for ; Wed, 02 Jan 2013 19:40:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=fOeRNuSsN9MFEa1pTWypa2rRwIbz8UlbS7THrugd/p8=; b=NarJV11KmIEoQUz9LtAEs1KQQBB7GcrUu8K6jWxU+SJTp6PT82KyV0rUmYhoM/LI2U evuPQu+9WRmjpwwPa4rcJRtjuc4Iq+yEFlbcHqzfOOVn15AiWQumpsMP43NK2lT9LVNk FJBfGBXfKIJY/IWF6Dh64QRHVisZjniH3yCom6cPr6Omg1rMeuEEBLuwCur3fXDh3IAm 2NVJ7/yzbmXUc+ELp3zU8kG80r+kID3+VV23ddUCkdfLnCqi1gz9eoIxRacn7aeOUkwP SlepZvfaNbXP7RM6ZRLboc9ZV3Aw8/JvFqUHxFxFNZapvw5aX6ifvQ9S4JS0t6sqcVhG GCIQ== MIME-Version: 1.0 Received: by 10.60.27.193 with SMTP id v1mr26127889oeg.99.1357184410794; Wed, 02 Jan 2013 19:40:10 -0800 (PST) Received: by 10.182.160.99 with HTTP; Wed, 2 Jan 2013 19:40:10 -0800 (PST) Date: Wed, 2 Jan 2013 22:40:10 -0500 Message-ID: Subject: Installing through usb "laplink" cable. From: Super Bisquit To: FreeBSD PowerPC ML Content-Type: text/plain; charset=ISO-8859-1 X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 03:40:17 -0000 I'm assuming that this is a "double bulk" device. One the i386 install, I'm not able to register the device with the normal usb kernel modules. The idea is to use it as a serial connection and to watch the install process on the i386. The data display cable is still messed up and I do not know how to switch the video output to the vga connection with the openfirmware forth prompt. So...... I need help with the above processes. If the video output can be routed to the vga output, then using the usb cable may not be necessary. The other problem is that the DVD drive is grinding and has rejected every disk inserted. I'm not sure if the usb boot is available on it. Since I am also not the original owner nor the second owner, updating firmware has become a futile effort- don't know the root password. Any suggestions to solving this. Thanks. From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 04:19:37 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 9A29DFB0 for ; Thu, 3 Jan 2013 04:19:37 +0000 (UTC) (envelope-from sendtomatt@gmail.com) Received: from mail-pa0-f47.google.com (mail-pa0-f47.google.com [209.85.220.47]) by mx1.freebsd.org (Postfix) with ESMTP id 6BCB82D6 for ; Thu, 3 Jan 2013 04:19:37 +0000 (UTC) Received: by mail-pa0-f47.google.com with SMTP id fa10so8365954pad.6 for ; Wed, 02 Jan 2013 20:19:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:message-id:date:from:user-agent:mime-version:to:cc :subject:references:in-reply-to:x-enigmail-version:content-type; bh=QIW8vueVX1gURJL+uQ66h6fWKSa+QbwQA2Rpbj2bVws=; b=OMjzJIgWKb6Vq4UNV+5q9B4cclZk+0LlhHqqwum40fz+1/Wsc587UOKTrN5u/tUJm4 eq+k4nYcRR5a5gHX4wrGBQiIaZovjjSLXidvuNZ++g5F9NGRFi3xIs7kzzO3wqEyzRTN OKXc8ap/AGUUAOilPyYl1yYFSXoK9+H2CEof3CbT7lVBjLzv332bW+yjBMxM/QIGKIhE mmgYyGs+RjWLs58S4ku+E5SwIc5ufw6OBqGlkS/zYiQ4ZEL+e7GgQSU4eGTx+EvsHzz4 FasWodkU7bVrHckTb5GmRfNQOD8n9BfNPdlgW4B//AOAcQDU9ADmefp3oJ5ghaZNqxED eh2Q== X-Received: by 10.66.52.102 with SMTP id s6mr142595675pao.6.1357186776630; Wed, 02 Jan 2013 20:19:36 -0800 (PST) Received: from bakeneko.local (108-213-216-134.lightspeed.sntcca.sbcglobal.net. [108.213.216.134]) by mx.google.com with ESMTPS id a4sm30480836paw.21.2013.01.02.20.19.34 (version=SSLv3 cipher=OTHER); Wed, 02 Jan 2013 20:19:35 -0800 (PST) Message-ID: <50E506B9.6070805@gmail.com> Date: Wed, 02 Jan 2013 20:19:05 -0800 From: matt User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0.11) Gecko/20121203 Thunderbird/10.0.11 MIME-Version: 1.0 To: Super Bisquit Subject: Re: Installing through usb "laplink" cable. References: In-Reply-To: X-Enigmail-Version: 1.3.5 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: FreeBSD PowerPC ML X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 04:19:37 -0000 On 01/02/13 19:40, Super Bisquit wrote: > I'm assuming that this is a "double bulk" device. One the i386 > install, I'm not able to register the device with the normal usb > kernel modules. > The idea is to use it as a serial connection and to watch the install > process on the i386. The data display cable is still messed up and I > do not know how to switch the video output to the vga connection with > the openfirmware forth prompt. > > So...... > I need help with the above processes. If the video output can be > routed to the vga output, then using the usb cable may not be > necessary. > > The other problem is that the DVD drive is grinding and has rejected > every disk inserted. I'm not sure if the usb boot is available on it. > Since I am also not the original owner nor the second owner, updating > firmware has become a futile effort- don't know the root password. Any > suggestions to solving this. > > Thanks. > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" I didn't see the model, but most of the NewWorld machines can be made to USB boot. OS9 can be USB booted on an MDD, for instance... The path will be something terrible and long...do you see a disk device under the usb chip in the OF tree? If it's an iBook, it should be setup to mirror automatically...there were ancient hacks to enable spanning mode in OF on these...reviewing the forth involved may be enlightening for OF display management :) Matt From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 04:59:53 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id E215A2B8 for ; Thu, 3 Jan 2013 04:59:53 +0000 (UTC) (envelope-from sendtomatt@gmail.com) Received: from mail-pa0-f41.google.com (mail-pa0-f41.google.com [209.85.220.41]) by mx1.freebsd.org (Postfix) with ESMTP id BDDA5399 for ; Thu, 3 Jan 2013 04:59:53 +0000 (UTC) Received: by mail-pa0-f41.google.com with SMTP id bj3so8451372pad.28 for ; Wed, 02 Jan 2013 20:59:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:message-id:date:from:user-agent:mime-version:to:cc :subject:references:in-reply-to:content-type :content-transfer-encoding; bh=OZ2XkAvhpR+0wuXDPffEpTQIiOYqJ/gnMYFIyx5Wn70=; b=AVb1UFRkBzuOVqylcU00RKKlcmzZZ7WK2UKD3siBlUDUfztoNvhH6gSzkAIWPLHl+6 CZVcr/61KPIl6fIATm1NTNiCp9uLiROm2FigH7Mbv5/UBFD6ty++tHvU9o3L5aZ2aFaC 8hcOWpjd5DXydZN1RF6+9JUiUuWG17nqIjh2VyNpxaXDGIMHHgkd67Z1FAxQfugJ7z8k 3UFBCRGHNtIvfRLEo9P5haXsO1rAYUThertxioo8+MDpWNaEQrqUgOfXyJ1fLSMGvP/M In1clQoJRA8M+8TkSWw+nxu/gzVqXNkiZxHd9mmRFQDv3Y8HkKvgLFu4tEqaJXtLX9pN df7w== X-Received: by 10.69.16.100 with SMTP id fv4mr149648200pbd.135.1357189193030; Wed, 02 Jan 2013 20:59:53 -0800 (PST) Received: from flatline.local (70-36-223-239.dsl.dynamic.sonic.net. [70.36.223.239]) by mx.google.com with ESMTPS id oi3sm29642396pbb.1.2013.01.02.20.59.50 (version=SSLv3 cipher=OTHER); Wed, 02 Jan 2013 20:59:51 -0800 (PST) Message-ID: <50E51040.7080705@gmail.com> Date: Wed, 02 Jan 2013 20:59:44 -0800 From: matt User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:17.0) Gecko/17.0 Thunderbird/17.0 MIME-Version: 1.0 To: Andreas Tobler Subject: Re: 9.0 ppc64 - Wrong Sensor Values - G5 Quad late 2005 References: <20121228155406.252c1f50@beelzebub> <50DDE399.4090408@fgznet.ch> In-Reply-To: <50DDE399.4090408@fgznet.ch> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: freebsd-ppc@freebsd.org X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 04:59:53 -0000 On 12/28/2012 10:23, Andreas Tobler wrote: > On 28.12.12 15:54, Mages Simon wrote: >> Hi, >> >> i bought a PowerMac G5 Quad to run FreeBSD on it :) >> >> but now i have my first Problem. >> >> The CPU is at 40 °C in idle and under load it goes up in ~5 °C step's >> but when it should reach 60 °C it jumps up to 1000+ °C and FreeBSD shut >> the Box down. >> >> With this Problem i can't even install FreeBSD ... > Would you mind trying an image from here: > > ftp://ftp.freebsd.org/pub/FreeBSD/releases/powerpc/powerpc64/ISO-IMAGES/9.1/ > > There were some improvements on 9.1 and it would be great to make sure > that they are in 9.1. If not, we can start bisect. > > I run a Quad on 10.0 and have not much problems so far. > > Andreas > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" I saw incorrect values booting from either 9.0 or 9.1 to install CURRENT. Specifically, some values for the fans or other sensors were very large numbers. I quickly updated, so unfortunately I did not document my findings...I stupidly assumed it was known :) Temperature was OK though, I'm quite sure the cooling system on mine is functioning properly though. One known issue with these is (depending on the pumps involved) one or more heatblocks clogged, or too little fluid to run the entire system (so one CPU is 100C +, the other is at 50C). Often this can be identified by gurgling or pump sounds during startup. Do run ASD just to rule out some other issue. It is no longer a problem in CURRENT, so it's fixed now, whatever it was. Matt From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 07:29:44 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id DBE4C857 for ; Thu, 3 Jan 2013 07:29:44 +0000 (UTC) (envelope-from superbisquit@gmail.com) Received: from mail-ob0-f182.google.com (mail-ob0-f182.google.com [209.85.214.182]) by mx1.freebsd.org (Postfix) with ESMTP id 8C3C1218 for ; Thu, 3 Jan 2013 07:29:44 +0000 (UTC) Received: by mail-ob0-f182.google.com with SMTP id 16so13365680obc.41 for ; Wed, 02 Jan 2013 23:29:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=NVSwrSlOloBbwyFqInlGy5ZHVpJwXt/Rd5uJYtTbQ6E=; b=C9SyeVE4TBl44w69BWQv/aAjLHtoOYlCItNS/zNbkp/Fo9A5/nDtVCzbIYNn8Mm4aD Kl6uANzq1OLT50v+/bLTHkuABgjPjYMegqgdFHDQmrDPO19fqOw2+sJWCdRy2oPBZOhy CsoZdLM9Pt69XnuIrFsoeLuOS4IqDL8S9kUyK9NFnsrHxLr9VKCrUPL0WGtNXualxfer JdhhpJ9jU/U7PkjGKG0DKByB+S3Pqzbqcmm9OtRBSvsQvze3/rfBZQ5R5Lt1+TS5cCS4 5cArjXWfqjsXmSvwWrZ6n/6do3cYqj20Vl2CXkjIv4Eooj2R9k0Q7TKjuzxFXg0gPSG5 gtqQ== MIME-Version: 1.0 Received: by 10.60.172.6 with SMTP id ay6mr26521333oec.10.1357198178705; Wed, 02 Jan 2013 23:29:38 -0800 (PST) Received: by 10.182.160.99 with HTTP; Wed, 2 Jan 2013 23:29:38 -0800 (PST) In-Reply-To: <50E506B9.6070805@gmail.com> References: <50E506B9.6070805@gmail.com> Date: Thu, 3 Jan 2013 02:29:38 -0500 Message-ID: Subject: Re: Installing through usb "laplink" cable. From: Super Bisquit To: matt Content-Type: text/plain; charset=ISO-8859-1 Cc: FreeBSD PowerPC ML X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 07:29:44 -0000 It's a PowerBook Titanium. I see the memstick image for powerpc. If I can get the display to work long enough with crapping out, I'll try searching the tree. I found a reference to usfs in the /usr/src/sys/modules/usb directory and added that on the i386 machine. On Wed, Jan 2, 2013 at 11:19 PM, matt wrote: > On 01/02/13 19:40, Super Bisquit wrote: > > I'm assuming that this is a "double bulk" device. One the i386 > install, I'm not able to register the device with the normal usb > kernel modules. > The idea is to use it as a serial connection and to watch the install > process on the i386. The data display cable is still messed up and I > do not know how to switch the video output to the vga connection with > the openfirmware forth prompt. > > So...... > I need help with the above processes. If the video output can be > routed to the vga output, then using the usb cable may not be > necessary. > > The other problem is that the DVD drive is grinding and has rejected > every disk inserted. I'm not sure if the usb boot is available on it. > Since I am also not the original owner nor the second owner, updating > firmware has become a futile effort- don't know the root password. Any > suggestions to solving this. > > Thanks. > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" > > I didn't see the model, but most of the NewWorld machines can be made to USB > boot. OS9 can be USB booted on an MDD, for instance... > > The path will be something terrible and long...do you see a disk device > under the usb chip in the OF tree? > > If it's an iBook, it should be setup to mirror automatically...there were > ancient hacks to enable spanning mode in OF on these...reviewing the forth > involved may be enlightening for OF display management :) > > Matt From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 09:36:33 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 45CD6475 for ; Thu, 3 Jan 2013 09:36:33 +0000 (UTC) (envelope-from gamuso@gmail.com) Received: from mail-la0-f54.google.com (mail-la0-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id 7D1BFA97 for ; Thu, 3 Jan 2013 09:36:21 +0000 (UTC) Received: by mail-la0-f54.google.com with SMTP id fp12so7588997lab.13 for ; Thu, 03 Jan 2013 01:36:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:from:content-type:content-transfer-encoding:subject :message-id:date:to:mime-version:x-mailer; bh=B9x0VKvT0/ou/hL/KQE+iwmVYT1RogwG8mPPrpzIaLE=; b=en6q+DHS7oS0ekivuczABHd9ZKRKfiu3HJPW7oPcp7xg3FPuraxm1asd5lF+qEugbK WsbJkENDufi8J5IA2RrmehRZkWx5hGYjdP2nEqLkr5NI7Zi+X3dapIUv5Q6kniGylKqY hZYi5z+pl0+7gz7Px4sp8kzDKU4Bu3z/gPOjE0HMeXu/BZfDYpnVQ6dTUNehWQCKAaqZ DeFpypW43tZnCm9p0oneEN5HXMqV9Zu6cTR2ALkKQxfvvH7RDLH2S2GAVubIE0uD11cn 1u+UjFPGn4ef/RGgmAJk5vm/7tPmG/UQaP4GXIlNir2XPQ6lLhOPAsE7mKQVgwNjSVRP 2m7w== X-Received: by 10.152.105.103 with SMTP id gl7mr45571272lab.10.1357205774795; Thu, 03 Jan 2013 01:36:14 -0800 (PST) Received: from [172.16.1.12] (ti0057a380-dhcp0301.bb.online.no. [80.213.137.46]) by mx.google.com with ESMTPS id fb1sm16795109lbb.15.2013.01.03.01.36.13 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 03 Jan 2013 01:36:13 -0800 (PST) From: Odd-Jarle Kristoffersen Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: iBook G3/800 Airport wireless support? Message-Id: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> Date: Thu, 3 Jan 2013 10:36:11 +0100 To: freebsd-ppc@freebsd.org Mime-Version: 1.0 (Mac OS X Mail 6.2 \(1499\)) X-Mailer: Apple Mail (2.1499) X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 09:36:33 -0000 I received a tip to post my question to this mailing list, so here we = go. I have an iBook G3/800 dual-USB which I have installed FreeBSD = 9.0-RELEASE onto. However I am unable to find the wireless network card. = This is a basic Airport card connected to the original pccard / PCMCIA = slot, not the Extreme edition. The card works well with Mac OS X 10.4. I've tried the bwi driver but no card shows up. Added the following to /boot/loader.conf if_bwi_load=3D"YES" wlan_load=3D"YES" wlan_wep_load=3D"YES" wlan_ccmp_load=3D"YES" wlan_tkip_load=3D"YES" wlan_amrr_load=3D"YES" Then I also tried the instructions in the handbook = http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless= .html but no wireless adapter shows up in dmesg Googling a bit I find some references to if_wi and a "man if_wi" seems = promising since I don't have the Express card, but just the PCMCIA = AirPort card which I understand is a rebranded Lucent card or something. However I have no if_wi.ko module. Does the powerpc branch support = PCMCIA/PCCARD at all? Is the if_wi replaced by if_bwi with no support = for the "simple" Airport card? pciconf -lv does not show any network devices except for the built-in = ethernet port (UniNorth/Pangea GMAC (Sun GEM).=20 Thanks for any input on the matter. From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 17:56:55 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 03F51DBE for ; Thu, 3 Jan 2013 17:56:55 +0000 (UTC) (envelope-from torfinn.ingolfsen@getmail.no) Received: from smtp.getmail.no (smtp.getmail.no [84.208.15.66]) by mx1.freebsd.org (Postfix) with ESMTP id ACFAF84C for ; Thu, 3 Jan 2013 17:56:54 +0000 (UTC) MIME-version: 1.0 Content-transfer-encoding: 7BIT Content-type: text/plain; charset=US-ASCII Received: from get-mta-scan04.get.basefarm.net ([10.5.16.4]) by get-mta-out01.get.basefarm.net (Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008)) with ESMTP id <0MG200JCF72NKO00@get-mta-out01.get.basefarm.net> for freebsd-ppc@freebsd.org; Thu, 03 Jan 2013 17:56:47 +0100 (MET) Received: from get-mta-scan04.get.basefarm.net (localhost.localdomain [127.0.0.1]) by localhost (Email Security Appliance) with SMTP id 0F2E31F03D9E_E5B84FB for ; Thu, 03 Jan 2013 16:56:47 +0000 (GMT) Received: from kg-v2.kg4.no (cm-84.215.134.159.getinternet.no [84.215.134.159]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by get-mta-scan04.get.basefarm.net (Sophos Email Appliance) with ESMTPSA id E3F891F03DAB_E5B84EF for ; Thu, 03 Jan 2013 16:56:46 +0000 (GMT) Date: Thu, 03 Jan 2013 17:56:46 +0100 From: Torfinn Ingolfsen To: freebsd-ppc@freebsd.org Subject: Re: iBook G3/800 Airport wireless support? Message-id: <20130103175646.2c634caae31776dd7dd3535c@getmail.no> In-reply-to: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> References: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> X-Mailer: Sylpheed 3.3.0 (GTK+ 2.24.6; amd64-portbld-freebsd8.3) X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 17:56:55 -0000 On Thu, 03 Jan 2013 10:36:11 +0100 Odd-Jarle Kristoffersen wrote: > I received a tip to post my question to this mailing list, so here we go. > > I have an iBook G3/800 dual-USB which I have installed FreeBSD 9.0-RELEASE onto. However I am unable to find the wireless network card. > This is a basic Airport card connected to the original pccard / PCMCIA slot, not the Extreme edition. The card works well with Mac OS X 10.4. Have you tried FreeBSD 9.1-RELEASE? Is it better at detecting the card? > pciconf -lv does not show any network devices except for the built-in ethernet port (UniNorth/Pangea GMAC (Sun GEM). Odd. Usually PCCard controllers are connected to PCI. Do you have complete output from pciconf -lv somewhere? And dmesg output for that matter? Is your PCCard controller(s) detected at all? HTH -- Torfinn Ingolfsen From owner-freebsd-ppc@FreeBSD.ORG Thu Jan 3 18:03:56 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 329E0FB for ; Thu, 3 Jan 2013 18:03:56 +0000 (UTC) (envelope-from chmeeedalf@gmail.com) Received: from mail-vb0-f51.google.com (mail-vb0-f51.google.com [209.85.212.51]) by mx1.freebsd.org (Postfix) with ESMTP id E787D8A6 for ; Thu, 3 Jan 2013 18:03:55 +0000 (UTC) Received: by mail-vb0-f51.google.com with SMTP id fq11so15847978vbb.10 for ; Thu, 03 Jan 2013 10:03:49 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=h6dslPzCBK51SkzLvLoe6I19fPrSp+z9i5hP73qn69k=; b=N2wWH/h6iUUXKbP4ZXYLvMyHXVYVjDT7QpWe5MbcBJkDqkcyLB7VkIkhRwgdyD8zyd vZ3dkMK/ySYwyeMHvSa3CRaJT/UsvIHt2Rq81nAqF1S1cbJ/yvqiS19T3zGwe8qWaEP/ 7LuT1eRS3S5vwH/p9Wo5i9T1YfKeCEKoxLouArkWI8taI7aZFxl0feghCLxFxattOzu0 SLFsbasg8yw5cU7AxNsNgJFzqRyfCw+ND34bVEIkYwE17fPISJ5B+EklGTkAUCAyykXS biM6KAHPAJcy4tbhBPpjhiUoZw70qPw5x+KLKjvAd0b10QDt/XFn7SMdoenoX/FUG+3K VoUA== MIME-Version: 1.0 Received: by 10.221.10.6 with SMTP id oy6mr71922825vcb.65.1357236229648; Thu, 03 Jan 2013 10:03:49 -0800 (PST) Sender: chmeeedalf@gmail.com Received: by 10.58.213.74 with HTTP; Thu, 3 Jan 2013 10:03:49 -0800 (PST) Received: by 10.58.213.74 with HTTP; Thu, 3 Jan 2013 10:03:49 -0800 (PST) In-Reply-To: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> References: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> Date: Thu, 3 Jan 2013 13:03:49 -0500 X-Google-Sender-Auth: j3Fpq5AjlPOPZJdzKFI2WDUTIWY Message-ID: Subject: Re: iBook G3/800 Airport wireless support? From: Justin Hibbits To: Odd-Jarle Kristoffersen Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: FreeBSD PowerPC ML X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 18:03:56 -0000 (writing from my phone, as I'm in the process of moving) The original Airport card in your iBook uses the if_wi driver. However there are a couple problems right now. The most obvious is that there is currently no attachment for the driver for the Macio bus. You can search this list archives for a patch I made in 2011, but the other problem that you will run into is the if_wi driver is just broken. There are discussions about this on FreeBSD-wireless that you can search for. -Justin On Jan 3, 2013 4:36 AM, "Odd-Jarle Kristoffersen" wrote: > > I received a tip to post my question to this mailing list, so here we go. > > I have an iBook G3/800 dual-USB which I have installed FreeBSD 9.0-RELEASE onto. However I am unable to find the wireless network card. This is a basic Airport card connected to the original pccard / PCMCIA slot, not the Extreme edition. The card works well with Mac OS X 10.4. > > I've tried the bwi driver but no card shows up. > > Added the following to /boot/loader.conf > > if_bwi_load="YES" > wlan_load="YES" > wlan_wep_load="YES" > wlan_ccmp_load="YES" > wlan_tkip_load="YES" > wlan_amrr_load="YES" > > Then I also tried the instructions in the handbook > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html > > but no wireless adapter shows up in dmesg > > Googling a bit I find some references to if_wi and a "man if_wi" seems promising since I don't have the Express card, but just the PCMCIA AirPort card which I understand is a rebranded Lucent card or something. > > However I have no if_wi.ko module. Does the powerpc branch support PCMCIA/PCCARD at all? Is the if_wi replaced by if_bwi with no support for the "simple" Airport card? > > pciconf -lv does not show any network devices except for the built-in ethernet port (UniNorth/Pangea GMAC (Sun GEM). > > Thanks for any input on the matter. > > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" From owner-freebsd-ppc@FreeBSD.ORG Fri Jan 4 11:43:10 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.FreeBSD.org [8.8.178.115]) by hub.freebsd.org (Postfix) with ESMTP id 83D89AE3 for ; Fri, 4 Jan 2013 11:43:10 +0000 (UTC) (envelope-from gamuso@gmail.com) Received: from mail-la0-f45.google.com (mail-la0-f45.google.com [209.85.215.45]) by mx1.freebsd.org (Postfix) with ESMTP id C2C45DCC for ; Fri, 4 Jan 2013 11:43:09 +0000 (UTC) Received: by mail-la0-f45.google.com with SMTP id ep20so9402121lab.4 for ; Fri, 04 Jan 2013 03:43:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:from:content-type:message-id:mime-version:subject:date :references:to:in-reply-to:x-mailer; bh=HJTXLmhzJqJ7RpQ/qd0HZ9gdbn1XYJmq+SqRPbPNRNc=; b=DHrS58g3seskM/OTfSzHdFbDL2nTZnrZB4/3kFxrIlH14lgf/UToTF8R4nT5yfWBlT SXBnROU1smANF0qedhnOgyxF5IaV1uIrIozBEwgV8G8GkjTM7uVbsiIVnoIAuLfi/Ws4 b7TuwQe1J1qNLyEG3VUSjoyq4Qyxq8Mw0N8bHu7dLdnpawT506K0xObgsDk7phUmWdpi jagL0bVksEllMchFAd+HbO+ldxHj8jDY6EsvkjSncRgmNVd6u9XWy2akw8OvDVuEXMDU XaXAUFlBxaO4v08I1doRHcLkGHpqtXAPDR+oLLV+J8YJM/cswOYabYCWTiI292KiO5Ku 9BYQ== X-Received: by 10.112.44.134 with SMTP id e6mr21066708lbm.134.1357299787604; Fri, 04 Jan 2013 03:43:07 -0800 (PST) Received: from [172.16.1.12] (ti0057a380-dhcp0301.bb.online.no. [80.213.137.46]) by mx.google.com with ESMTPS id ne2sm19348051lab.10.2013.01.04.03.43.05 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 04 Jan 2013 03:43:06 -0800 (PST) From: Odd-Jarle Kristoffersen Message-Id: Mime-Version: 1.0 (Mac OS X Mail 6.2 \(1499\)) Subject: Re: iBook G3/800 Airport wireless support? Date: Fri, 4 Jan 2013 12:43:03 +0100 References: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> <20130103175646.2c634caae31776dd7dd3535c@getmail.no> To: "freebsd-ppc@freebsd.org" In-Reply-To: <20130103175646.2c634caae31776dd7dd3535c@getmail.no> X-Mailer: Apple Mail (2.1499) Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.14 X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 04 Jan 2013 11:43:10 -0000 3. jan. 2013 kl. 17:56 skrev Torfinn Ingolfsen = : > On Thu, 03 Jan 2013 10:36:11 +0100 > Odd-Jarle Kristoffersen wrote: >=20 >> I received a tip to post my question to this mailing list, so here we = go. >>=20 >> I have an iBook G3/800 dual-USB which I have installed FreeBSD = 9.0-RELEASE onto. However I am unable to find the wireless network card.=20= >> This is a basic Airport card connected to the original pccard / = PCMCIA slot, not the Extreme edition. The card works well with Mac OS X = 10.4. >=20 > Have you tried FreeBSD 9.1-RELEASE? Is it better at detecting the = card? >=20 >> pciconf -lv does not show any network devices except for the built-in = ethernet port (UniNorth/Pangea GMAC (Sun GEM).=20 >=20 > Odd. Usually PCCard controllers are connected to PCI. > Do you have complete output from pciconf -lv somewhere? > And dmesg output for that matter? > Is your PCCard controller(s) detected at all? >=20 Sure, I also did a Debian 6.0 install (MintPPC actually) just to see if = it worked there. Which it did with some bugs=85 Here is the FreeBSD 9.0-RELEASE dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE #0: Wed Jan 4 08:17:39 UTC 2012 marcel@xserve.lan.xcllnt.net:/usr/obj/usr/src/sys/GENERIC powerpc cpu0: IBM PowerPC 750FX revision 2.3, 800.36 MHz cpu0: Features 8c000000 cpu0: HID0 8092c0a4 real memory =3D 656322560 (625 MB) avail memory =3D 628629504 (599 MB) kbd0 at kbdmux0 nexus0: cpulist0: on nexus0 cpu0: on cpulist0 unin0: on nexus0 unin0: Version 192 iichb0: mem 0xf8001000-0xf8001fff irq 42 on = unin0 iicbus0: on iichb0 iicbus0: at addr 0x158 iicbus0: at addr 0x1c0 pcib0: on nexus0 pci0: on pcib0 agp0: on hostb0 vgapci0: port 0x400-0x4ff mem = 0x98000000-0x9fffffff,0x90000000-0x9000ffff irq 48 at device 16.0 on = pci0 pcib1: on nexus0 pci1: on pcib1 macio0: mem 0x80000000-0x8007ffff at device 23.0 = on pci1 openpic0: mem 0x40000-0x7ffff on macio0 macgpio0: mem 0x50-0x7f on macio0 pmuextint0: extint-gpio 1 irq 47 on = macgpio0 vcoregpio0: gpio 1 on macgpio0 scc0: mem = 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff = irq 22,5,6,23,7,8 on macio0 uart0: on scc0 uart1: on scc0 pcm0: mem = 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2 on macio0 pmu0: mem 0x16000-0x17fff irq 25 on macio0 adb0: on pmu0 iichb1: mem 0x18000-0x18fff irq 26 on macio0 iicbus1: on iichb1 iicbus1: at addr 0x1c0 snapper0: at addr 0x6a on = iicbus1 ata0: mem = 0x1f000-0x1ffff,0x8a00-0x8aff irq 19,11 on macio0 ohci0: mem 0x80081000-0x80081fff irq 27 = at device 24.0 on pci1 usbus0: on ohci0 ohci1: mem 0x80080000-0x80080fff irq 28 = at device 25.0 on pci1 usbus1: on ohci1 pcib2: on nexus0 pci2: on pcib2 fwohci0: mem 0xf5000000-0xf5000fff irq 40 at device 14.0 = on pci2 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0a:95:ff:fe:73:57:4c fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:0a:95:73:57:4c fwe0: Ethernet address: 02:0a:95:73:57:4c sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D2, = CYCLEMASTER mode gem0: mem 0xf5200000-0xf53fffff irq 41 at = device 15.0 on pci2 miibus0: on gem0 bmtphy0: PHY 0 on miibus0 bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, = auto-flow gem0: 10kB RX FIFO, 4kB TX FIFO gem0: Ethernet address: 00:0a:95:73:57:4c sc0: on nexus0 sc0: Unknown <16 virtual consoles, flags=3D0x300> Timecounter "timebase" frequency 24835277 Hz quality 0 Event timer "decrementer" frequency 24835277 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me)=20 firewire0: bus manager 0=20 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered akbd0: at device 2 on adb0 kbd1 at akbd0 ams0: at device 3 on adb0 ams0: ADB Mouse =3D 0xd (Extended Mode) ams0: 2-button 400-dpi Touchpad ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: ATA-6 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 28615MB (58605120 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 cd0 at ata0 bus 0 scbus0 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [246882 x 2048 byte records] Trying to mount root from ufs:/dev/ada0s3 [rw]... And the FreeBSD 9.0-RELEASE pciconf -lv hostb0@pci0:0:11:0: class=3D0x060000 card=3D0x00000000 = chip=3D0x0027106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'UniNorth/Pangea AGP' class =3D bridge subclass =3D HOST-PCI vgapci0@pci0:0:16:0: class=3D0x030000 card=3D0x4c571002 = chip=3D0x4c571002 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon Mobility M7 LW [Radeon Mobility 7500]' class =3D display subclass =3D VGA macio0@pci1:0:23:0: class=3D0xff0000 card=3D0x00000000 = chip=3D0x0025106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'KeyLargo/Pangea Mac I/O' ohci0@pci1:0:24:0: class=3D0x0c0310 card=3D0x00000000 = chip=3D0x0026106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'KeyLargo/Pangea USB' class =3D serial bus subclass =3D USB ohci1@pci1:0:25:0: class=3D0x0c0310 card=3D0x00000000 = chip=3D0x0026106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'KeyLargo/Pangea USB' class =3D serial bus subclass =3D USB hostb1@pci1:0:11:0: class=3D0x060000 card=3D0x00000000 = chip=3D0x0028106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'UniNorth/Pangea PCI' class =3D bridge subclass =3D HOST-PCI fwohci0@pci2:0:14:0: class=3D0x0c0010 card=3D0x0030106b = chip=3D0x0030106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'UniNorth/Pangea FireWire' class =3D serial bus subclass =3D FireWire gem0@pci2:0:15:0: class=3D0x020000 card=3D0x00000000 = chip=3D0x0024106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'UniNorth/Pangea GMAC (Sun GEM)' class =3D network subclass =3D ethernet hostb2@pci2:0:11:0: class=3D0x060000 card=3D0x00000000 = chip=3D0x0029106b rev=3D0x00 hdr=3D0x00 vendor =3D 'Apple Computer Inc.' device =3D 'UniNorth/Pangea Internal PCI' class =3D bridge subclass =3D HOST-PCI Debian 6.0 reported this information in dmesg and lspci [ 11.627839] cfg80211: Using static regulatory domain info [ 11.634751] cfg80211: Regulatory domain: US [ 11.641358] (start_freq - end_freq @ bandwidth), (max_antenna_gain, = max_eirp) [ 11.648185] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 = mBm) [ 11.654960] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 = mBm) [ 11.661634] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 = mBm) [ 11.668213] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 = mBm) [ 11.674705] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 = mBm) [ 11.681083] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 = mBm) [ 11.697067] cfg80211: Calling CRDA for country: US [ 11.804966] orinoco 0.15 (David Gibson = , Pavel Roskin , et al) [ 11.890506] airport 0.15 (Benjamin Herrenschmidt = ) [ 11.890619] airport: Physical address 80030000 [ 13.095613] airport 0.00030000:radio: Hardware identity = 0005:0001:0001:0002 [ 13.102330] airport 0.00030000:radio: Station identity = 001f:0001:0008:0046 [ 13.108719] airport 0.00030000:radio: Firmware determined as = Lucent/Agere 8.70 [ 13.115494] airport 0.00030000:radio: firmware: requesting = agere_sta_fw.bin [ 13.267449] airport 0.00030000:radio: Hardware identity = 0005:0001:0001:0002 [ 13.273930] airport 0.00030000:radio: Station identity = 001f:0002:0009:0030 [ 13.280096] airport 0.00030000:radio: Firmware determined as = Lucent/Agere 9.48 [ 13.286247] airport 0.00030000:radio: Ad-hoc demo mode supported [ 13.292351] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode = supported [ 13.298493] airport 0.00030000:radio: WEP supported, 104-bit key [ 13.304732] airport 0.00030000:radio: WPA-PSK supported 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP Flags: bus master, 66MHz, medium devsel, latency 16 Capabilities: Kernel driver in use: agpgart-uninorth 0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon = Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Radeon Mobility M7 LW [Radeon = Mobility 7500] Flags: bus master, stepping, 66MHz, medium devsel, latency 255, = IRQ 48 Memory at 98000000 (32-bit, prefetchable) [size=3D128M] I/O ports at 0400 [size=3D256] Memory at 90000000 (32-bit, non-prefetchable) [size=3D64K] Expansion ROM at 90020000 [size=3D128K] Capabilities: Kernel driver in use: radeonfb 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI Flags: bus master, 66MHz, medium devsel, latency 16 0001:10:17.0 Unassigned class [ff00]: Apple Computer Inc. = KeyLargo/Pangea Mac I/O Flags: bus master, medium devsel, latency 16 Memory at 80000000 (32-bit, non-prefetchable) [size=3D512K] Kernel driver in use: macio 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB = (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 27 Memory at 80081000 (32-bit, non-prefetchable) [size=3D4K] Capabilities: Kernel driver in use: ohci_hcd 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB = (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 28 Memory at 80080000 (32-bit, non-prefetchable) [size=3D4K] Capabilities: Kernel driver in use: ohci_hcd 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal = PCI Flags: bus master, 66MHz, medium devsel, latency 16 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth/Pangea = FireWire (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. UniNorth/Pangea FireWire Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 40 Memory at f5000000 (32-bit, non-prefetchable) [size=3D4K] Capabilities: Kernel driver in use: firewire_ohci 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth/Pangea = GMAC (Sun GEM) Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41 Memory at f5200000 (32-bit, non-prefetchable) [size=3D2M] Expansion ROM at f5100000 [disabled] [size=3D1M] Kernel driver in use: gem But I suppose this is probably not worth the time as Justin mentioned = that the driver is broken. Maybe it's just time to retire and replace = this iBook with something else :) The hoarder in me just has a hard time = letting go of working hardware=85 Maybe I will just get an Express card = or some other card that works and maybe find a use for this old laptop = somewhere. Thanks anyways for all the input and help! > HTH > --=20 > Torfinn Ingolfsen > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" From owner-freebsd-ppc@FreeBSD.ORG Fri Jan 4 11:47:05 2013 Return-Path: Delivered-To: freebsd-ppc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id 295FFB23 for ; Fri, 4 Jan 2013 11:47:05 +0000 (UTC) (envelope-from gamuso@gmail.com) Received: from mail-la0-f50.google.com (mail-la0-f50.google.com [209.85.215.50]) by mx1.freebsd.org (Postfix) with ESMTP id AB8F3DE3 for ; Fri, 4 Jan 2013 11:47:04 +0000 (UTC) Received: by mail-la0-f50.google.com with SMTP id fs13so9343700lab.23 for ; Fri, 04 Jan 2013 03:46:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:from:content-type:message-id:mime-version:subject:date :references:to:in-reply-to:x-mailer; bh=6qnaucWuIkjL5YpvpfjMz/zVJjq+1KFjNZ/XTiZv9fU=; b=jFvVlXpJxYTGHfsPmU1Bv6hWwaR5uCudTSD8Utk3qJuV6KhYz04NOfp04jTIUNo5ab vLnuqz7aTDnHmouLei6iaiwsrpJnWic6qDkyjHZz154qu876706QgB8tZSXEjXwfQJ9J Y/AqtIelMEmc34F6Y/ze8uWWat/oxUCcSjy2/SiIuz1Z6w66xTvmg39OjHXwnF98Jr+O e4buEXJktaW2VV7kQHIdEcULIF3VBnZIJE07oDC0YWcH7StiskAevqC+zPHHJkX8+Aya 8ceh9zDHJ0atmh4AFnMHBFe/i20yZQ7ydwoNDNa2Id0eXTRCkZqDCEoGKKqy5nRvu1VX wsRA== X-Received: by 10.152.121.212 with SMTP id lm20mr49009136lab.42.1357300018386; Fri, 04 Jan 2013 03:46:58 -0800 (PST) Received: from [172.16.1.12] (ti0057a380-dhcp0301.bb.online.no. [80.213.137.46]) by mx.google.com with ESMTPS id mb2sm1569075lab.7.2013.01.04.03.46.56 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 04 Jan 2013 03:46:57 -0800 (PST) From: Odd-Jarle Kristoffersen Message-Id: <4BDC5350-80E9-4798-AEFB-CF971999E7BB@gmail.com> Mime-Version: 1.0 (Mac OS X Mail 6.2 \(1499\)) Subject: Re: iBook G3/800 Airport wireless support? Date: Fri, 4 Jan 2013 12:46:55 +0100 References: <3BD09A38-2C1F-4713-86A7-E8E86D6AA5C8@gmail.com> To: FreeBSD PowerPC ML In-Reply-To: X-Mailer: Apple Mail (2.1499) Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.14 X-BeenThere: freebsd-ppc@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the PowerPC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 04 Jan 2013 11:47:05 -0000 Thanks Justin That explains quite a bit. I guess I am better of using my time on = something else :) Not sure what I was going to use this machine for = anyways. It's getting old so I might just as well find some newer and = better hardware to play with. Thanks again for helping! And good luck with the move. 3. jan. 2013 kl. 19:03 skrev Justin Hibbits : > (writing from my phone, as I'm in the process of moving) >=20 > The original Airport card in your iBook uses the if_wi driver. However = there are a couple problems right now. The most obvious is that there is = currently no attachment for the driver for the Macio bus. You can search = this list archives for a patch I made in 2011, but the other problem = that you will run into is the if_wi driver is just broken. There are = discussions about this on FreeBSD-wireless that you can search for. >=20 > -Justin >=20 > On Jan 3, 2013 4:36 AM, "Odd-Jarle Kristoffersen" = wrote: > > > > I received a tip to post my question to this mailing list, so here = we go. > > > > I have an iBook G3/800 dual-USB which I have installed FreeBSD = 9.0-RELEASE onto. However I am unable to find the wireless network card. = This is a basic Airport card connected to the original pccard / PCMCIA = slot, not the Extreme edition. The card works well with Mac OS X 10.4. > > > > I've tried the bwi driver but no card shows up. > > > > Added the following to /boot/loader.conf > > > > if_bwi_load=3D"YES" > > wlan_load=3D"YES" > > wlan_wep_load=3D"YES" > > wlan_ccmp_load=3D"YES" > > wlan_tkip_load=3D"YES" > > wlan_amrr_load=3D"YES" > > > > Then I also tried the instructions in the handbook > > > > = http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless= .html > > > > but no wireless adapter shows up in dmesg > > > > Googling a bit I find some references to if_wi and a "man if_wi" = seems promising since I don't have the Express card, but just the PCMCIA = AirPort card which I understand is a rebranded Lucent card or something. > > > > However I have no if_wi.ko module. Does the powerpc branch support = PCMCIA/PCCARD at all? Is the if_wi replaced by if_bwi with no support = for the "simple" Airport card? > > > > pciconf -lv does not show any network devices except for the = built-in ethernet port (UniNorth/Pangea GMAC (Sun GEM). > > > > Thanks for any input on the matter. > > > > _______________________________________________ > > freebsd-ppc@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-ppc > > To unsubscribe, send any mail to = "freebsd-ppc-unsubscribe@freebsd.org"