From owner-freebsd-ruby@FreeBSD.ORG Sun Jan 5 10:36:25 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 6D9FCC2 for ; Sun, 5 Jan 2014 10:36:25 +0000 (UTC) Received: from portscout.freebsd.org (portscout.freebsd.org [IPv6:2001:1900:2254:206a::50:6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 5989D133E for ; Sun, 5 Jan 2014 10:36:25 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id s05AaPg1031362 for ; Sun, 5 Jan 2014 10:36:25 GMT (envelope-from portscout@FreeBSD.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.7/Submit) id s05AaPVA031361; Sun, 5 Jan 2014 10:36:25 GMT (envelope-from portscout@FreeBSD.org) Message-Id: <201401051036.s05AaPVA031361@portscout.freebsd.org> X-Authentication-Warning: portscout.freebsd.org: portscout set sender to portscout@FreeBSD.org using -f Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Sun, 5 Jan 2014 10:36:25 +0000 From: portscout@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 05 Jan 2014 10:36:25 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/ruby@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ sysutils/rubygem-log4r | 1.1.10 | 1.1.11 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt Thanks. From owner-freebsd-ruby@FreeBSD.ORG Mon Jan 6 10:56:19 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id E0678E57 for ; Mon, 6 Jan 2014 10:56:19 +0000 (UTC) Received: from portscout.freebsd.org (portscout.freebsd.org [IPv6:2001:1900:2254:206a::50:6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id C696D1E94 for ; Mon, 6 Jan 2014 10:56:19 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id s06AuJZX054957 for ; Mon, 6 Jan 2014 10:56:19 GMT (envelope-from portscout@FreeBSD.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.7/Submit) id s06AuJva054953; Mon, 6 Jan 2014 10:56:19 GMT (envelope-from portscout@FreeBSD.org) Message-Id: <201401061056.s06AuJva054953@portscout.freebsd.org> X-Authentication-Warning: portscout.freebsd.org: portscout set sender to portscout@FreeBSD.org using -f Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Mon, 6 Jan 2014 10:56:19 +0000 From: portscout@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 06 Jan 2014 10:56:19 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/ruby@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ textproc/rubygem-kramdown | 1.0.2 | 1.3.1 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt Thanks. From owner-freebsd-ruby@FreeBSD.ORG Mon Jan 6 11:08:00 2014 Return-Path: Delivered-To: ruby@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id F3A41E42 for ; Mon, 6 Jan 2014 11:07:59 +0000 (UTC) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id DED1C11B4 for ; Mon, 6 Jan 2014 11:07:59 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s06B7xXD046680 for ; Mon, 6 Jan 2014 11:07:59 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id s06B7xEC046678 for ruby@FreeBSD.org; Mon, 6 Jan 2014 11:07:59 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 6 Jan 2014 11:07:59 GMT Message-Id: <201401061107.s06B7xEC046678@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: ruby@FreeBSD.org Subject: Current problem reports assigned to ruby@FreeBSD.org X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 06 Jan 2014 11:08:00 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/185064 ruby [PATCH]: textproc/rubygem-kramdown update to version 1 f ports/185063 ruby Port www/rubygem-haml update to version 4.0.4 [PATCH] o ports/185062 ruby [New Port] www/rubygem-html2haml Converts HTML into Ha o ports/185061 ruby [New Port] www/rubygem-haml-contrib Addons for the Rub o ports/185030 ruby Port devel/rubygem-ffi update to version 1.9.3 [PATCH] o ports/185027 ruby Port textproc/rubygem-sass update to version 3.2.13 [P f ports/185024 ruby Port graphics/rubygem-chunky_png update to version 1.2 o ports/184998 ruby [MAINTAINER] www/rubygem-simple-rss: update to 1.3.1 o ports/184604 ruby [PATCH] www/redmine: update to 2.3.4, add UNICORN and o ports/184603 ruby [PATCH] net/rubygem-openid: update to 2.3.0 o ports/184592 ruby [PATCH] www/rubygem-unicorn: add rc.d script o ports/183869 ruby [PATCH] devel/ruby-gems : Update to 2.1.7 o ports/182278 ruby [PATCH] databases/rubygem-pg | please update from 0.15 o ports/182275 ruby [PATCH] devel/rubygem-treetop | please update from 1.4 o ports/182273 ruby [PATCH] misc/rubygem-mime-types | please update from 1 o ports/182270 ruby [PATCH] devel/rubygem-rake | please update from 10.0.4 o ports/182243 ruby |PATCH| sysutils/rubygem-capistrano: update to 2.15.4 o ports/181447 ruby textproc/rubygem-sass: Update to the last version o ports/181262 ruby lang/ruby19|20 and devel/py-yaml problem install 19 problems total. From owner-freebsd-ruby@FreeBSD.ORG Mon Jan 6 14:26:28 2014 Return-Path: Delivered-To: ruby@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 195ECA3D for ; Mon, 6 Jan 2014 14:26:28 +0000 (UTC) Received: from mail-wi0-f169.google.com (mail-wi0-f169.google.com [209.85.212.169]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id A587915D6 for ; Mon, 6 Jan 2014 14:26:27 +0000 (UTC) Received: by mail-wi0-f169.google.com with SMTP id j9so2805637wiv.0 for ; Mon, 06 Jan 2014 06:26:25 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:date:message-id:subject:from:to :content-type; bh=VAdSUYV2Ky9aSilOGXIkg/APOzm7UdbQc5NqJsdbluw=; b=FCOqyGeiUipArua04jrS7huzy9a0NqgnJAusx6CkOa+jVljiOKEFLkwwLkmvO7WXrn MePhORjMhNXi9dX49xC6B7moZuYaM0uZN81MLBxRcfwWLTOIyzqkJNlvHlKetzCrHBQ/ HAotp00r0ekUO3qmrza2J8IEVYStGEA2+NnRfunW++w1xlcgZPikk6LkalJ3BHRjQRfy 3507F5f05wgRMoxoO4GJNQ35bb5GVO3JUQDaZBqZ8qHRlyAampccFJqpEiJFmBwXnyEL pEIaghj+roDUIfaxmGNZe0pCJmL9oK6R3/V/ivX2w0VIFk29o4sK/KoHMD1l3yVr27Q6 f9mw== X-Gm-Message-State: ALoCoQnQnxvw019t7PGAPXyDzwbgL8uKw/GN7UHfEm2O8ZTXQjzKzS+osnK4ioTO9CTN/yODjOo7 MIME-Version: 1.0 X-Received: by 10.180.92.233 with SMTP id cp9mr12433139wib.21.1389018080874; Mon, 06 Jan 2014 06:21:20 -0800 (PST) Received: by 10.216.16.8 with HTTP; Mon, 6 Jan 2014 06:21:20 -0800 (PST) Date: Mon, 6 Jan 2014 22:21:20 +0800 Message-ID: Subject: Just confirm how to install ruby From: Ben Tung To: ruby@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.17 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 06 Jan 2014 14:26:28 -0000 Dear sir, I don't know much ruby, but I need ruby to run rmate. I've installed the /usr/ports/lang/ruby20 , and I got /usr/local/bin/ruby20 I don't why not /usr/local/bin/ruby, and it causes rmate doesn't work till I # ln -s /usr/local/bin/ruby20 /usr/local/bin/ruby It works! Just as I said I don't know ruby, and I just need to a ruby interpreter to run rmate ( don't need ruby on rail or rvm ) so I am wondering if it is correct to put a link to /usr/local/bin/ruby20 Or, is there any correct way to set /usr/local/bin/ruby to /usr/local/bin/ruby20? Thank you for your attention, Best Regards, Ben From owner-freebsd-ruby@FreeBSD.ORG Tue Jan 7 08:28:20 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id A861D496 for ; Tue, 7 Jan 2014 08:28:20 +0000 (UTC) Received: from portsmon.freebsd.org (portsmon.freebsd.org [IPv6:2001:1900:2254:206a::50:3]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 7E9501E2E for ; Tue, 7 Jan 2014 08:28:20 +0000 (UTC) Received: from portsmon.freebsd.org ([127.0.1.104]) by portsmon.freebsd.org (8.14.7/8.14.7) with ESMTP id s078SKub051482 for ; Tue, 7 Jan 2014 08:28:20 GMT (envelope-from linimon@FreeBSD.org) Date: Tue, 7 Jan 2014 08:28:20 GMT Message-Id: <201401070828.s078SKub051482@portsmon.freebsd.org> From: linimon@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports that you maintain which are currently marked broken X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list Reply-To: portmgr-feedback@FreeBSD.org List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 07 Jan 2014 08:28:20 -0000 Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 7.x/8.x/9.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: audio/ruby-esound broken because: Fails to configure build errors: none. overview: http://portsmon.FreeBSD.org/portoverview.py?category=audio&portname=ruby-esound If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From owner-freebsd-ruby@FreeBSD.ORG Tue Jan 7 11:12:25 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id DD1D9515 for ; Tue, 7 Jan 2014 11:12:25 +0000 (UTC) Received: from portscout.freebsd.org (portscout.freebsd.org [IPv6:2001:1900:2254:206a::50:6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id C8B721CE7 for ; Tue, 7 Jan 2014 11:12:25 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id s07BCPSI033227 for ; Tue, 7 Jan 2014 11:12:25 GMT (envelope-from portscout@FreeBSD.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.7/Submit) id s07BCPU4033222; Tue, 7 Jan 2014 11:12:25 GMT (envelope-from portscout@FreeBSD.org) Message-Id: <201401071112.s07BCPU4033222@portscout.freebsd.org> X-Authentication-Warning: portscout.freebsd.org: portscout set sender to portscout@FreeBSD.org using -f Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Tue, 7 Jan 2014 11:12:25 +0000 From: portscout@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 07 Jan 2014 11:12:25 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/ruby@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ print/rubygem-prawn | 0.12.0 | 0.13.2 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt Thanks. From owner-freebsd-ruby@FreeBSD.ORG Tue Jan 7 12:40:09 2014 Return-Path: Delivered-To: ruby@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 306FDA37; Tue, 7 Jan 2014 12:40:09 +0000 (UTC) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 04B6613C3; Tue, 7 Jan 2014 12:40:09 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s07Ce8eQ023044; Tue, 7 Jan 2014 12:40:08 GMT (envelope-from edwin@freefall.freebsd.org) Received: (from edwin@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id s07Ce8rM023043; Tue, 7 Jan 2014 12:40:08 GMT (envelope-from edwin) Date: Tue, 7 Jan 2014 12:40:08 GMT Message-Id: <201401071240.s07Ce8rM023043@freefall.freebsd.org> To: edwin@FreeBSD.org, freebsd-ports-bugs@FreeBSD.org, ruby@FreeBSD.org From: edwin@FreeBSD.org Subject: Re: ports/185550: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 07 Jan 2014 12:40:09 -0000 Synopsis: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version Responsible-Changed-From-To: freebsd-ports-bugs->ruby Responsible-Changed-By: edwin Responsible-Changed-When: Tue Jan 7 12:40:08 UTC 2014 Responsible-Changed-Why: ruby@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=185550 From owner-freebsd-ruby@FreeBSD.ORG Tue Jan 7 12:40:11 2014 Return-Path: Delivered-To: ruby@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 03760A3B; Tue, 7 Jan 2014 12:40:11 +0000 (UTC) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id CCD4C13C4; Tue, 7 Jan 2014 12:40:10 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s07CeAZU023119; Tue, 7 Jan 2014 12:40:10 GMT (envelope-from edwin@freefall.freebsd.org) Received: (from edwin@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id s07CeAUd023118; Tue, 7 Jan 2014 12:40:10 GMT (envelope-from edwin) Date: Tue, 7 Jan 2014 12:40:10 GMT Message-Id: <201401071240.s07CeAUd023118@freefall.freebsd.org> To: ports@robakdesign.com, edwin@FreeBSD.org, ruby@FreeBSD.org From: edwin@FreeBSD.org Subject: Re: ports/185550: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 07 Jan 2014 12:40:11 -0000 Synopsis: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version State-Changed-From-To: open->feedback State-Changed-By: edwin State-Changed-When: Tue Jan 7 12:40:10 UTC 2014 State-Changed-Why: Awaiting maintainers feedback (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=185550 From owner-freebsd-ruby@FreeBSD.ORG Tue Jan 7 12:50:01 2014 Return-Path: Delivered-To: ruby@smarthost.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 70883BD1 for ; Tue, 7 Jan 2014 12:50:01 +0000 (UTC) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 5B85C14D3 for ; Tue, 7 Jan 2014 12:50:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s07Co1bO025060 for ; Tue, 7 Jan 2014 12:50:01 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id s07Co1N0025059; Tue, 7 Jan 2014 12:50:01 GMT (envelope-from gnats) Date: Tue, 7 Jan 2014 12:50:01 GMT Message-Id: <201401071250.s07Co1N0025059@freefall.freebsd.org> To: ruby@FreeBSD.org From: Edwin Groothuis Subject: Re: ports/185550: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list Reply-To: Edwin Groothuis List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 07 Jan 2014 12:50:01 -0000 The following reply was made to PR ports/185550; it has been noted by GNATS. From: Edwin Groothuis To: rouslan@rshell.net Cc: bug-followup@FreeBSD.org Subject: Re: ports/185550: [port-update] sysutils/rubygem-facter updated to latest 1.7.4 version Date: Tue, 7 Jan 2014 12:40:09 UT Maintainer of sysutils/rubygem-facter, Please note that PR ports/185550 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/185550 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org From owner-freebsd-ruby@FreeBSD.ORG Wed Jan 8 22:25:07 2014 Return-Path: Delivered-To: freebsd-ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 357BFE58; Wed, 8 Jan 2014 22:25:07 +0000 (UTC) Received: from sender1.zohomail.com (sender1.zohomail.com [72.5.230.95]) by mx1.freebsd.org (Postfix) with ESMTP id 19F10180E; Wed, 8 Jan 2014 22:25:06 +0000 (UTC) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=zapps768; d=zoho.com; h=subject:from:to:cc:in-reply-to:references:content-type:date:message-id:mime-version; b=Un0M6chs1cehoGp+4GOyeqO0FqNonBpW1U73TVZzOASuDo0Oi2SF5KZHnRGdan9xIF3pHqBAbNWW lTjxjV1yPk0BJyvJCta9OA7jH+do430IDnZ+WjhwszdTtgOBrMB+ Received: from [10.1.2.6] (46.229.54.117 [46.229.54.117]) by mx.zohomail.com with SMTPS id 1389219899703801.6735491296556; Wed, 8 Jan 2014 14:24:59 -0800 (PST) Subject: Re: ruby docs ports, ruby-doc-* From: clutton To: Steve Wills In-Reply-To: <20140102212606.GB879@mouf.net> References: <1388022457.3771.13.camel@eva02.mbsd> <20140102212606.GB879@mouf.net> Content-Type: text/plain; charset="UTF-8" Date: Thu, 09 Jan 2014 00:24:54 +0200 Message-ID: <1389219894.1947.11.camel@eva02.mbsd> Mime-Version: 1.0 X-Mailer: Evolution 2.32.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit X-ZohoMail: Ss SS_10 UW UB ZCF-710TPL UW UB SGR3_1_26113_532 X-ZohoMail-Owner: <1389219894.1947.11.camel@eva02.mbsd>+zmo_0_ X-ZohoMail-Sender: 46.229.54.117 X-Zoho-Virus-Status: 2 Cc: freebsd-ruby X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 08 Jan 2014 22:25:07 -0000 On Thu, 2014-01-02 at 21:26 +0000, Steve Wills wrote: > Thanks for your patience, I went ahead and committed this. Had a make a few > changes, let me know if anything is off. > > Steve > > On Thu, Dec 26, 2013 at 03:47:37AM +0200, clutton wrote: > > Commit please. > > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/183096 > > > > And also I'd like to organise all ruby documentation ports. > > Some of them died, some of them were consumed by others, all of them are > > outdated. > > > > Is there any maintainer who have a time to cooperate with me? > > Remove them all, some of them? Move them to misc? Any thoughts are > > welcome. The rest. http://www.freebsd.org/cgi/query-pr.cgi?pr=185540 My proposal is that. Let remove all those 3 ports. Then ruby-doc-stdlib will move to misc. And perhaps ruby-doc-core will be created. From owner-freebsd-ruby@FreeBSD.ORG Thu Jan 9 05:47:26 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 1A104A64 for ; Thu, 9 Jan 2014 05:47:26 +0000 (UTC) Received: from mout.gmx.net (mout.gmx.net [212.227.17.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id B86071DC3 for ; Thu, 9 Jan 2014 05:47:25 +0000 (UTC) Received: from [192.168.15.106] ([24.7.23.137]) by mail.gmx.com (mrgmx003) with ESMTPSA (Nemesis) id 0MUZKF-1Vs5kk0Kw7-00RFHP for ; Thu, 09 Jan 2014 06:47:17 +0100 From: Harry Weppner Content-Type: multipart/signed; boundary="Apple-Mail=_5B5B3024-3BF0-47B8-95E8-AD258C0933E4"; protocol="application/pgp-signature"; micalg=pgp-sha1 Subject: miniruby segfaults when attempting to install lang/ruby19 or lang/ruby20 on ppc64 Message-Id: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> Date: Wed, 8 Jan 2014 21:47:14 -0800 To: ruby@freebsd.org, freebsd-ppc@freebsd.org Mime-Version: 1.0 (Mac OS X Mail 6.6 \(1510\)) X-Mailer: Apple Mail (2.1510) X-Provags-ID: V03:K0:mesZxixHcqK1t0Uo8VaH4+/nb1hwqlJAR6tnZW8Rsgztxd3uqp+ bDtUPQ3Z6dNKgRPFOeWbJ0XPFP79wZSMq2Zl+uRLAt92oP/WmHQkce6QrmsOidpoSLxb3yq vgT49ZI6r0RITSsi0x5ib5/lcu62Y1jPSx5TK96matssFxGdxxlKw2r3zxF0L6nCcCaGVjB Fc5UF4wD/ec50h81X6G0Q== X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 09 Jan 2014 05:47:26 -0000 --Apple-Mail=_5B5B3024-3BF0-47B8-95E8-AD258C0933E4 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 Hi, I brought an older dual G5 Powermac back to life and installed FreeBSD = 10.0-RC4 on it with a GENERIC ppc64 kernel. When installing lang/ruby19 = or lang/ruby20 miniruby segfaults in libthr. Tested with both the = default gcc42 as well as with gcc49. Has anyone seen this issue before? T Thanks & cheerio, Harry. (gdb) bt #0 handle_signal (actp=3D0xffffffffffbfa130, sig=3D11, = info=3D0xffffffffffbfa690, ucp=3D0xffffffffffbfa1d0) at /usr/src/lib/libthr/thread/thr_sig.c:188 #1 0x00000000502f36ac in thr_sighandler (sig=3D11, = info=3D0xffffffffffbfa690, _ucp=3D0xffffffffffbfa1d0) at /usr/src/lib/libthr/thread/thr_sig.c:183 #2 0xffffffffffffe188 in ?? () = =E2=94=8C=E2=94=80=E2=94=80/usr/src/lib/libthr/thread/thr_sig.c=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=90 =E2=94=82184 } = =E2=94=82 =E2=94=82185 = =E2=94=82 =E2=94=82186 static void = =E2=94=82 =E2=94=82187 handle_signal(struct sigaction *actp, int sig, = siginfo_t *info, ucontext_t *ucp) =E2=94=82 >=E2=94=82188 { = =E2=94=82 =E2=94=82189 struct pthread *curthread =3D = _get_curthread(); =E2=94=82= The specific instruction is: = =E2=94=8C=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=90 >=E2=94=820x502f32ac stdu r1,-1392(r1) = =E2=94=82 =E2=94=820x502f32b0 ld r0,0(r9) = =E2=94=82 =E2=94=820x502f32b4 cmpdi cr7,r0,0 = =E2=94=82 (gdb) x/x $r1-1392 0xffffffffffbf9b50: Cannot access memory at address = 0xffffffffffbf9b50 --Apple-Mail=_5B5B3024-3BF0-47B8-95E8-AD258C0933E4 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=signature.asc Content-Type: application/pgp-signature; name=signature.asc Content-Description: Message signed with OpenPGP using GPGMail -----BEGIN PGP SIGNATURE----- Comment: GPGTools - http://gpgtools.org iEYEARECAAYFAlLON+MACgkQ/CxjG+i4lOgndQCfYxLHlWBhs34YirhkS3Fonw0/ JN8AoI/RdgIUJ6i4lvtGDhzr520+KplC =lsVC -----END PGP SIGNATURE----- --Apple-Mail=_5B5B3024-3BF0-47B8-95E8-AD258C0933E4-- From owner-freebsd-ruby@FreeBSD.ORG Thu Jan 9 06:49:11 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 49FAE8BF; Thu, 9 Jan 2014 06:49:11 +0000 (UTC) Received: from mail-bk0-x22c.google.com (mail-bk0-x22c.google.com [IPv6:2a00:1450:4008:c01::22c]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 9CA5B124D; Thu, 9 Jan 2014 06:49:10 +0000 (UTC) Received: by mail-bk0-f44.google.com with SMTP id d7so992251bkh.31 for ; Wed, 08 Jan 2014 22:49:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date:message-id:subject :from:to:cc:content-type; bh=tn32mH6rDPP6IHX7h3/I+XMqQ0LYXcMEIK/qW/hEWQI=; b=z1Qy/zBFMq3YHLZ+dB+cCkyKZFZtrY3GOqY2jzRe7VCZbzcQXPD7rSq1NBEzZES5/k DqorYFb6WenI9z2cJ89JkLIKVqOD2b7TzStTQtBXZhg83kvi/Koh2h9OWrapPGreDcTN Sg26ByBDAXyEhE9lxix1ITbJPEL6Pmjy5JRBWmnuaz9Ni5KpI0JpVKl1rPaA8tkUKhCV X96KJxajbg+azkMskcNgvKdYd6Gfn+FvJNmKT7E2eUf/9E+/Mt/sdSf0n1oecOfvbOCh 1Jf7k9aqswPQL8ElWT4DNtdkF/asgea5e01MT4PFH7rRZhnA7LjoYNinUdwqhoFYmqS0 ++cA== MIME-Version: 1.0 X-Received: by 10.204.58.196 with SMTP id i4mr246903bkh.120.1389250148794; Wed, 08 Jan 2014 22:49:08 -0800 (PST) Sender: chmeeedalf@gmail.com Received: by 10.205.21.66 with HTTP; Wed, 8 Jan 2014 22:49:08 -0800 (PST) Received: by 10.205.21.66 with HTTP; Wed, 8 Jan 2014 22:49:08 -0800 (PST) In-Reply-To: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> References: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> Date: Wed, 8 Jan 2014 22:49:08 -0800 X-Google-Sender-Auth: Jrr5bbbHVPSdaZKPkYbeKQXx0GE Message-ID: Subject: Re: miniruby segfaults when attempting to install lang/ruby19 or lang/ruby20 on ppc64 From: Justin Hibbits To: Harry Weppner Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: base64 X-Content-Filtered-By: Mailman/MimeDel 2.1.17 Cc: ruby@freebsd.org, FreeBSD PowerPC ML X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 09 Jan 2014 06:49:11 -0000 SGksDQoNCk9uIEphbiA4LCAyMDE0IDk6NDcgUE0sICJIYXJyeSBXZXBwbmVyIiA8aGFycnkud2Vw cG5lckBnbXgubmV0PiB3cm90ZToNCj4NCj4gSGksDQo+DQo+IEkgYnJvdWdodCBhbiBvbGRlciBk dWFsIEc1IFBvd2VybWFjIGJhY2sgdG8gbGlmZSBhbmQgaW5zdGFsbGVkIEZyZWVCU0QNCjEwLjAt UkM0IG9uIGl0IHdpdGggYSBHRU5FUklDIHBwYzY0IGtlcm5lbC4gV2hlbiBpbnN0YWxsaW5nIGxh bmcvcnVieTE5IG9yDQpsYW5nL3J1YnkyMCBtaW5pcnVieSBzZWdmYXVsdHMgaW4gbGlidGhyLiBU ZXN0ZWQgd2l0aCBib3RoIHRoZSBkZWZhdWx0DQpnY2M0MiBhcyB3ZWxsIGFzIHdpdGggZ2NjNDku DQo+DQo+IEhhcyBhbnlvbmUgc2VlbiB0aGlzIGlzc3VlIGJlZm9yZT8gVA0KPg0KPiBUaGFua3Mg JiBjaGVlcmlvLCBIYXJyeS4NCj4NCj4gKGdkYikgYnQNCj4gIzAgIGhhbmRsZV9zaWduYWwgKGFj dHA9MHhmZmZmZmZmZmZmYmZhMTMwLCBzaWc9MTEsDQppbmZvPTB4ZmZmZmZmZmZmZmJmYTY5MCwg dWNwPTB4ZmZmZmZmZmZmZmJmYTFkMCkNCj4gICAgIGF0IC91c3Ivc3JjL2xpYi9saWJ0aHIvdGhy ZWFkL3Rocl9zaWcuYzoxODgNCj4gIzEgIDB4MDAwMDAwMDA1MDJmMzZhYyBpbiB0aHJfc2lnaGFu ZGxlciAoc2lnPTExLA0KaW5mbz0weGZmZmZmZmZmZmZiZmE2OTAsIF91Y3A9MHhmZmZmZmZmZmZm YmZhMWQwKQ0KPiAgICAgYXQgL3Vzci9zcmMvbGliL2xpYnRoci90aHJlYWQvdGhyX3NpZy5jOjE4 Mw0KPiAjMiAgMHhmZmZmZmZmZmZmZmZlMTg4IGluID8/ICgpDQo+DQo+DQog4pSM4pSA4pSAL3Vz ci9zcmMvbGliL2xpYnRoci90aHJlYWQvdGhyX3NpZy5j4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA 4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA 4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA 4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA 4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSA4pSQDQo+ICAgIOKUgjE4NCAgICAgfQ0KICAgICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICDilIINCj4gICAg4pSCMTg1DQogICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgIOKUgg0KPiAgICDilIIxODYgICAgIHN0 YXRpYyB2b2lkDQogICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgIOKUgg0K PiAgICDilIIxODcgICAgIGhhbmRsZV9zaWduYWwoc3RydWN0IHNpZ2FjdGlvbiAqYWN0cCwgaW50 IHNpZywgc2lnaW5mb190DQoqaW5mbywgdWNvbnRleHRfdCAqdWNwKSAgICAgICAgICAgICAgICAg ICAgICAg4pSCDQo+ICAgPuKUgjE4OCAgICAgew0KICAgICAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICDilIINCj4gICAg4pSCMTg5ICAgICAgICAgICAgIHN0cnVjdCBwdGhyZWFk ICpjdXJ0aHJlYWQgPSBfZ2V0X2N1cnRocmVhZCgpOw0KICAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICDilIINCj4NCj4NCj4gVGhlIHNwZWNpZmljIGluc3RydWN0aW9uIGlz Og0KPg0KIOKUjOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKUgOKU gOKUkA0KPiAgID7ilIIweDUwMmYzMmFjIDxoYW5kbGVfc2lnbmFsKzY0PiAgIHN0ZHUgICAgcjEs LTEzOTIocjEpDQogICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICDilIIN Cj4gICAg4pSCMHg1MDJmMzJiMCA8aGFuZGxlX3NpZ25hbCs2OD4gICBsZCAgICAgIHIwLDAocjkp DQogICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICDilIINCj4gICAg4pSC MHg1MDJmMzJiNCA8aGFuZGxlX3NpZ25hbCs3Mj4gICBjbXBkaSAgIGNyNyxyMCwwDQogICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICDilIINCj4NCj4gKGdkYikgeC94ICRy MS0xMzkyDQo+IDB4ZmZmZmZmZmZmZmJmOWI1MDogICAgIENhbm5vdCBhY2Nlc3MgbWVtb3J5IGF0 IGFkZHJlc3MgMHhmZmZmZmZmZmZmYmY5YjUwDQo+DQo+DQo+DQoNClRoaXMgaXMgYSBzdGFjayBv dmVyZmxvdyBwcm9ibGVtLiBJIGZpbGVkIGEgYnVnIHJlcG9ydCBpbiByZWRtaW5lIHJlZ2FyZGlu Zw0KdGhpcy4gQSBzaW1wIWUgd29ya2Fyb3VuZCBpcyB0byBjaGFuZ2UgdGhlIHN0YWNrIHNpemUg ZnJvbSAzIHBhZ2VzIHRvIDQgaW4NCnRocmVhZF9wdGhyZWFkLmMgb2YgcnVieSBhbmQgY29udGlu dWUgYnVpbGRpbmcuDQoNClNlZSBodHRwczovL2J1Z3MucnVieS1sYW5nLm9yZy9pc3N1ZXMvODc4 Mw0KDQotSnVzdGluDQo= From owner-freebsd-ruby@FreeBSD.ORG Thu Jan 9 07:45:39 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 0E36D72B; Thu, 9 Jan 2014 07:45:39 +0000 (UTC) Received: from kib.kiev.ua (kib.kiev.ua [IPv6:2001:470:d5e7:1::1]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 8C1A616BE; Thu, 9 Jan 2014 07:45:38 +0000 (UTC) Received: from tom.home (kostik@localhost [127.0.0.1]) by kib.kiev.ua (8.14.7/8.14.7) with ESMTP id s097jSr6096471; Thu, 9 Jan 2014 09:45:28 +0200 (EET) (envelope-from kostikbel@gmail.com) DKIM-Filter: OpenDKIM Filter v2.8.3 kib.kiev.ua s097jSr6096471 Received: (from kostik@localhost) by tom.home (8.14.7/8.14.7/Submit) id s097jS5J096470; Thu, 9 Jan 2014 09:45:28 +0200 (EET) (envelope-from kostikbel@gmail.com) X-Authentication-Warning: tom.home: kostik set sender to kostikbel@gmail.com using -f Date: Thu, 9 Jan 2014 09:45:28 +0200 From: Konstantin Belousov To: Harry Weppner Subject: Re: miniruby segfaults when attempting to install lang/ruby19 or lang/ruby20 on ppc64 Message-ID: <20140109074528.GX59496@kib.kiev.ua> References: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="4wFg4YZ8kmw0QCNv" Content-Disposition: inline In-Reply-To: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> User-Agent: Mutt/1.5.22 (2013-10-16) X-Spam-Status: No, score=-2.0 required=5.0 tests=ALL_TRUSTED,BAYES_00, DKIM_ADSP_CUSTOM_MED,FREEMAIL_FROM,NML_ADSP_CUSTOM_MED autolearn=no version=3.3.2 X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on tom.home Cc: ruby@freebsd.org, freebsd-ppc@freebsd.org X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 09 Jan 2014 07:45:39 -0000 --4wFg4YZ8kmw0QCNv Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Jan 08, 2014 at 09:47:14PM -0800, Harry Weppner wrote: > Hi, >=20 > I brought an older dual G5 Powermac back to life and installed FreeBSD 10= =2E0-RC4 on it with a GENERIC ppc64 kernel. When installing lang/ruby19 or = lang/ruby20 miniruby segfaults in libthr. Tested with both the default gcc4= 2 as well as with gcc49. >=20 > Has anyone seen this issue before? T >=20 > Thanks & cheerio, Harry. >=20 > (gdb) bt > #0 handle_signal (actp=3D0xffffffffffbfa130, sig=3D11, info=3D0xffffffff= ffbfa690, ucp=3D0xffffffffffbfa1d0) > at /usr/src/lib/libthr/thread/thr_sig.c:188 This is strange, where the instuction address for the frame #0 ? > #1 0x00000000502f36ac in thr_sighandler (sig=3D11, info=3D0xffffffffffbf= a690, _ucp=3D0xffffffffffbfa1d0) > at /usr/src/lib/libthr/thread/thr_sig.c:183 > #2 0xffffffffffffe188 in ?? () >=20 > =82=80=80/usr/src/lib/libthr/thread/thr_sig.c=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=83 > =81184 } = =81 > =81185 = =81 > =81186 static void = =81 > =81187 handle_signal(struct sigaction *actp, int sig, siginfo_t *i= nfo, ucontext_t *ucp) =81 > >=81188 { = =81 > =81189 struct pthread *curthread =3D _get_curthread(); = =81 >=20 >=20 > The specific instruction is: > =82=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80=80= =80=80=80=80=80=80=80=80=80=80=80=80=80=80=83 > >=810x502f32ac stdu r1,-1392(r1) = =81 > =810x502f32b0 ld r0,0(r9) = =81 > =810x502f32b4 cmpdi cr7,r0,0 = =81 >=20 > (gdb) x/x $r1-1392 > 0xffffffffffbf9b50: Cannot access memory at address 0xffffffffffbf9b50 >=20 Note that the fault happens during the delivery of SIGSEGV, and assuming that it was stdu instruction indeed, it sounds as if the stack overflow happens, probably due to excessive recursion. Is the backtrace you copied above the full backtrace ? I would expect much more frames above signal trampoline in the frame #2. It seems that gdb for rs6000 does not know about signal trampolines. --4wFg4YZ8kmw0QCNv Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (FreeBSD) iQIcBAEBAgAGBQJSzlOXAAoJEJDCuSvBvK1B2JMQAJpBRry6HnWZrOKZDScGst4O Jq5QO0r7ucObhWnGA1EfZG1swm5K4mk/ZFyenbalN+4mPiggFl4TfQ5gIlf0PeX1 UAyym6Zr8KMctvUkkli0D9aBOeRGL7vOu9zb+ZEcbaPWhHMz+1Jzxr/hoorzh6bv BR5AmLnHbgye7fCHocFRjx+HZc2tsB4XQ3XytVy8ii2CfjKmrogBbHYGmdt/TC4c LF8HbwO9wBDnwYq1pRKmh07goT1Tu/NO0E2hBMH/36JOrMchnqrigqVWTSk9bxV5 Jztaj32Zo3Vg6kPt/zABJvNqjIpsfmXaUiSxcI5zI0bzqYIu19oBDOTg6ZCQPaVA pisvmk7Lo+6Pkq+ddFVarrHlAtWpd+gVvDZVHK5AtQUQHoqUCGFWy1JSqLgAoCqu mmo1JIjKjS57Gt/41AgSdXIS/Df7e2bD069gmIhrrfZX3HXrnByM+PZbBro9vMsq ZsX60iQFfS/yDREGthqJERcU6J03llGyGiYP7C2yWyilQ3fMmtiubIRDGW1F2goj IlU9zMJ3wTnUjRWdGZMhTRIoFJ0pyQ8JdgfxDihUmZkRu4JGkDa4wIhNBu5aang+ sx0kv3C24jydi+UOxOcsM5xr623nt4Xbv5D7b1RYs2Onc9+k2jzzWa44hstgZnWO gc/ZzRp/+VQN50BRZ17Z =8LH6 -----END PGP SIGNATURE----- --4wFg4YZ8kmw0QCNv-- From owner-freebsd-ruby@FreeBSD.ORG Fri Jan 10 05:13:09 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id CCF056DB for ; Fri, 10 Jan 2014 05:13:09 +0000 (UTC) Received: from mout.gmx.net (mout.gmx.net [212.227.17.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 568D715D7 for ; Fri, 10 Jan 2014 05:13:09 +0000 (UTC) Received: from [192.168.15.106] ([24.7.23.137]) by mail.gmx.com (mrgmx103) with ESMTPSA (Nemesis) id 0Ltqmn-1VI5Pb2j9J-011CPG for ; Fri, 10 Jan 2014 06:13:07 +0100 Content-Type: multipart/signed; boundary="Apple-Mail=_8720A5BF-AA06-4F9B-B137-0E6894D01A82"; protocol="application/pgp-signature"; micalg=pgp-sha1 Mime-Version: 1.0 (Mac OS X Mail 6.6 \(1510\)) Subject: Re: miniruby segfaults when attempting to install lang/ruby19 or lang/ruby20 on ppc64 From: Harry Weppner In-Reply-To: Date: Thu, 9 Jan 2014 21:13:03 -0800 Message-Id: <0BFA4050-D946-4887-853F-4BB88A0F52FA@gmx.net> References: <1AAB79D6-9BDF-446A-8150-C9290FB341A7@gmx.net> To: Justin Hibbits X-Mailer: Apple Mail (2.1510) X-Provags-ID: V03:K0:cwJDI/e8TV0y4/9OJiqr1H9/4kz23EWhugu8A7fGnR7O7VXV8IK j6/bVfTfw85pRDbgEdTj98vHZbglet02Gnez1rw6WzWC3H7MJ9raxnUQQPaddxEzbPclsbx Yo+zHRzpXNqNDQySWxvZmi2xkgxDbVv4iaMHWd+4sQg57RDbzimZP0SHPLyslITJ/YAPchZ Ia1rTV/eO87ZiwN4GDAzQ== X-Content-Filtered-By: Mailman/MimeDel 2.1.17 Cc: ruby@freebsd.org, FreeBSD PowerPC ML X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 10 Jan 2014 05:13:10 -0000 --Apple-Mail=_8720A5BF-AA06-4F9B-B137-0E6894D01A82 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=utf-8 Hi Justin, thanks for pointing me to the issue you had reported - this patch fixed = ruby19. Thanks & cheerio, Harry. On Jan 8, 2014, at 10:49 PM, Justin Hibbits = wrote: > Hi, >=20 > On Jan 8, 2014 9:47 PM, "Harry Weppner" wrote: > > > > Hi, > > > > I brought an older dual G5 Powermac back to life and installed = FreeBSD 10.0-RC4 on it with a GENERIC ppc64 kernel. When installing = lang/ruby19 or lang/ruby20 miniruby segfaults in libthr. Tested with = both the default gcc42 as well as with gcc49. > > > > Has anyone seen this issue before? T > > > > Thanks & cheerio, Harry. > > > > (gdb) bt > > #0 handle_signal (actp=3D0xffffffffffbfa130, sig=3D11, = info=3D0xffffffffffbfa690, ucp=3D0xffffffffffbfa1d0) > > at /usr/src/lib/libthr/thread/thr_sig.c:188 > > #1 0x00000000502f36ac in thr_sighandler (sig=3D11, = info=3D0xffffffffffbfa690, _ucp=3D0xffffffffffbfa1d0) > > at /usr/src/lib/libthr/thread/thr_sig.c:183 > > #2 0xffffffffffffe188 in ?? () > > > > = =E2=94=8C=E2=94=80=E2=94=80/usr/src/lib/libthr/thread/thr_sig.c=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=90 > > =E2=94=82184 } = =E2=94=82 > > =E2=94=82185 = =E2=94=82 > > =E2=94=82186 static void = =E2=94=82 > > =E2=94=82187 handle_signal(struct sigaction *actp, int sig, = siginfo_t *info, ucontext_t *ucp) =E2=94=82 > > >=E2=94=82188 { = =E2=94=82 > > =E2=94=82189 struct pthread *curthread =3D = _get_curthread(); =E2=94=82= > > > > > > The specific instruction is: > > = =E2=94=8C=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94= =80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80= =E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=80=E2= =94=80=E2=94=80=E2=94=80=E2=94=80=E2=94=90 > > >=E2=94=820x502f32ac stdu r1,-1392(r1) = =E2=94=82 > > =E2=94=820x502f32b0 ld r0,0(r9) = =E2=94=82 > > =E2=94=820x502f32b4 cmpdi cr7,r0,0 = =E2=94=82 > > > > (gdb) x/x $r1-1392 > > 0xffffffffffbf9b50: Cannot access memory at address = 0xffffffffffbf9b50 > > > > > > >=20 > This is a stack overflow problem. I filed a bug report in redmine = regarding this. A simp!e workaround is to change the stack size from 3 = pages to 4 in thread_pthread.c of ruby and continue building. >=20 > See https://bugs.ruby-lang.org/issues/8783 >=20 > -Justin >=20 --Apple-Mail=_8720A5BF-AA06-4F9B-B137-0E6894D01A82 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=signature.asc Content-Type: application/pgp-signature; name=signature.asc Content-Description: Message signed with OpenPGP using GPGMail -----BEGIN PGP SIGNATURE----- Comment: GPGTools - http://gpgtools.org iEYEARECAAYFAlLPgV8ACgkQ/CxjG+i4lOgvnwCbBgfvCDWsP2zs0Dw7xdw8bkof orcAn1ReLEN9/v/ReoE3df6/2dYcdrqu =HQ/K -----END PGP SIGNATURE----- --Apple-Mail=_8720A5BF-AA06-4F9B-B137-0E6894D01A82-- From owner-freebsd-ruby@FreeBSD.ORG Fri Jan 10 09:48:33 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C5A10E47 for ; Fri, 10 Jan 2014 09:48:33 +0000 (UTC) Received: from portscout.freebsd.org (portscout.freebsd.org [IPv6:2001:1900:2254:206a::50:6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id B13B619F2 for ; Fri, 10 Jan 2014 09:48:33 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id s0A9mX4r002021 for ; Fri, 10 Jan 2014 09:48:33 GMT (envelope-from portscout@FreeBSD.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.7/Submit) id s0A9mXMx002017; Fri, 10 Jan 2014 09:48:33 GMT (envelope-from portscout@FreeBSD.org) Message-Id: <201401100948.s0A9mXMx002017@portscout.freebsd.org> X-Authentication-Warning: portscout.freebsd.org: portscout set sender to portscout@FreeBSD.org using -f Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Fri, 10 Jan 2014 09:48:33 +0000 From: portscout@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 10 Jan 2014 09:48:33 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/ruby@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ devel/rubygem-bson | 1.9.1 | 2.1.0 ------------------------------------------------+-----------------+------------ devel/rubygem-multi_json | 1.8.2 | 1.8.3 ------------------------------------------------+-----------------+------------ devel/rubygem-safe_yaml | 0.9.4 | 1.0.1 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt Thanks. From owner-freebsd-ruby@FreeBSD.ORG Sat Jan 11 10:02:08 2014 Return-Path: Delivered-To: ruby@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id A0671A4C for ; Sat, 11 Jan 2014 10:02:08 +0000 (UTC) Received: from portscout.freebsd.org (portscout.freebsd.org [IPv6:2001:1900:2254:206a::50:6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 8BAB51339 for ; Sat, 11 Jan 2014 10:02:08 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id s0BA28mV098105 for ; Sat, 11 Jan 2014 10:02:08 GMT (envelope-from portscout@FreeBSD.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.7/Submit) id s0BA28Bg098100; Sat, 11 Jan 2014 10:02:08 GMT (envelope-from portscout@FreeBSD.org) Message-Id: <201401111002.s0BA28Bg098100@portscout.freebsd.org> X-Authentication-Warning: portscout.freebsd.org: portscout set sender to portscout@FreeBSD.org using -f Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Sat, 11 Jan 2014 10:02:08 +0000 From: portscout@FreeBSD.org To: ruby@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-ruby@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: FreeBSD-specific Ruby discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 11 Jan 2014 10:02:08 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/ruby@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ databases/rubygem-activerecord-jdbcmysql-adapter | 1.2.9 | 1.3.5 ------------------------------------------------+-----------------+------------ devel/rubygem-docile | 1.1.0 | 1.1.2 ------------------------------------------------+-----------------+------------ devel/rubygem-multi_json | 1.8.2 | 1.8.4 ------------------------------------------------+-----------------+------------ devel/rubygem-shoulda-matchers | 2.2.0 | 2.5.0 ------------------------------------------------+-----------------+------------ textproc/rubygem-escape_utils | 1.0.0 | 1.0.1 ------------------------------------------------+-----------------+------------ www/rubygem-turbolinks | 1.3.0 | 2.2.0 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt Thanks.