From owner-freebsd-usb@FreeBSD.ORG Sun Feb 16 09:20:00 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@smarthost.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 7EF47990
for <freebsd-usb@smarthost.ysv.freebsd.org>;
Sun, 16 Feb 2014 09:20:00 +0000 (UTC)
Received: from freefall.freebsd.org (freefall.freebsd.org
[IPv6:2001:1900:2254:206c::16:87])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id 57AC91C34
for <freebsd-usb@smarthost.ysv.freebsd.org>;
Sun, 16 Feb 2014 09:20:00 +0000 (UTC)
Received: from freefall.freebsd.org (localhost [127.0.0.1])
by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s1G9K0X7092138
for <freebsd-usb@freefall.freebsd.org>; Sun, 16 Feb 2014 09:20:00 GMT
(envelope-from gnats@freefall.freebsd.org)
Received: (from gnats@localhost)
by freefall.freebsd.org (8.14.8/8.14.8/Submit) id s1G9K0Lh092137;
Sun, 16 Feb 2014 09:20:00 GMT (envelope-from gnats)
Resent-Date: Sun, 16 Feb 2014 09:20:00 GMT
Resent-Message-Id: <201402160920.s1G9K0Lh092137@freefall.freebsd.org>
Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer)
Resent-To: freebsd-usb@FreeBSD.org
Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org,
Philipp Maechler <philipp.maechler@mamo.li>
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 89722886
for <freebsd-gnats-submit@FreeBSD.org>; Sun, 16 Feb 2014 09:16:31 +0000 (UTC)
Received: from newred.freebsd.org (cgiserv.freebsd.org
[IPv6:2001:1900:2254:206a::50:4])
(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id 654A81C16
for <freebsd-gnats-submit@FreeBSD.org>; Sun, 16 Feb 2014 09:16:31 +0000 (UTC)
Received: from cgiserv.freebsd.org ([127.0.1.6])
by newred.freebsd.org (8.14.7/8.14.7) with ESMTP id s1G9GUIF046508
for <freebsd-gnats-submit@FreeBSD.org>; Sun, 16 Feb 2014 09:16:30 GMT
(envelope-from nobody@cgiserv.freebsd.org)
Received: (from nobody@localhost)
by cgiserv.freebsd.org (8.14.7/8.14.7/Submit) id s1G9GUeR046495;
Sun, 16 Feb 2014 09:16:30 GMT (envelope-from nobody)
Message-Id: <201402160916.s1G9GUeR046495@cgiserv.freebsd.org>
Date: Sun, 16 Feb 2014 09:16:30 GMT
From: Philipp Maechler <philipp.maechler@mamo.li>
To: freebsd-gnats-submit@FreeBSD.org
X-Send-Pr-Version: www-3.1
Subject: usb/186811: Intel NUC Haswell Generation USB 3 support (solution
attached)
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Sun, 16 Feb 2014 09:20:00 -0000
>Number: 186811
>Category: usb
>Synopsis: Intel NUC Haswell Generation USB 3 support (solution attached)
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Feb 16 09:20:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Philipp Maechler
>Release: 9.2-RELEASE / 10.0-RELEASE
>Organization:
>Environment:
FreeBSD x.tontaube.ch 10.0-RELEASE FreeBSD 10.0-RELEASE #6 r261922M: Sat Feb 15 19:30:32 CET 2014 root@x.tontaube.ch:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
I bought a Intel Nuc D34010WYK [0]. It has a QS77 Chipset with a Intel Panther Point USB Controller (as far as I can say).
The problem was, that a connected external harddisk case (it has a JMicron USB2Sata bridge JMicron JMS539 [1]) or even a simple usb 3 memory stick, it was always connected at highspeed (usb2) instead of superspeed (usb3) (see usbconfig in [2]). Of course, the attached harddisk drives only appeared to have only 40MB/s transfer rates instead of 400MB/s.
[0] http://www.intel.com/content/www/us/en/nuc/nuc-kit-d34010wyk.html
[1] http://www.jmicron.com/Product_JMS539.htm JMicron USB2Sata bridge (in a Raidsonic Icybox IB-3640SU3 together with a JMB321 SATA port multiplier)
[2]
faked output out of my head, if you need an exactly output I will provide after a reboot from a 10.0-RELEASE memory stick:
[root@x ~]# usbconfig
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.6: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (8mA) # <- PROBLEM
ugen0.7: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (8mA) # <- PROBLEM
>How-To-Repeat:
Attach any USB 3 mass storage (maybe any device) to a Intel Nuc D34010WYK.
Below 9.2-RELEASE and 10.0-RELEASE, the device will only appear as a HIGH-speed device (usb2) instead of a SUPER-speed device (usb3). (e.g. output dmesg or usbconfig)
>Fix:
By accident I found this commit:
http://lists.freebsd.org/pipermail/svn-src-stable-9/2012-November/003213.html
I then realized, that the pci dev id on my intel nuc is 0x9c318086 instead of 0x8c318086. In a fast hack I added the same code for this id in a 10.0-RELEASE Generic kernel [3] and the problem was solved [4], the devices are now correctly routed to xhci and have superspeed support.
I hope this pr helps to integrate the solution to FreeBSD, but I think the patch is not finished yet (maybe you would change the descriptions etc, as my knowledge of hardware naming is limited I'm not able to do). But as it doesn't change much, I'd define it as production-ready.
Philipp
[3]
[root@x /usr/src]# svn diff sys/dev/usb/controller/xhci_pci.c
Index: sys/dev/usb/controller/xhci_pci.c
===================================================================
--- sys/dev/usb/controller/xhci_pci.c (revision 261922)
+++ sys/dev/usb/controller/xhci_pci.c (working copy)
@@ -106,6 +106,8 @@
return ("Intel Panther Point USB 3.0 controller");
case 0x8c318086:
return ("Intel Lynx Point USB 3.0 controller");
+ case 0x9c318086:
+ return ("Intel Panther Point USB 3.0 controller");
default:
break;
@@ -239,6 +241,7 @@
switch (pci_get_devid(self)) {
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
+ case 0x9c318086: /* Panther Point */
sc->sc_port_route = &xhci_pci_port_route;
break;
default:
[4]
[root@x /usr/src]# usbconfig
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
ugen0.6: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) # <- perfect
ugen0.7: <USB to ATAATAPI Bridge JMicron> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) # <- perfect
Patch attached with submission follows:
--- sys/dev/usb/controller/xhci_pci.c 2014-02-16 10:09:07.597292623 +0100
+++ sys/dev/usb/controller/xhci_pci.c.new 2014-02-16 10:09:00.400292742 +0100
@@ -24,7 +24,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: releng/10.0/sys/dev/usb/controller/xhci_pci.c 255768 2013-09-21 21:40:57Z hselasky $");
+__FBSDID("$FreeBSD: release/10.0.0/sys/dev/usb/controller/xhci_pci.c 255768 2013-09-21 21:40:57Z hselasky $");
#include <sys/stdint.h>
#include <sys/stddef.h>
@@ -106,6 +106,8 @@
return ("Intel Panther Point USB 3.0 controller");
case 0x8c318086:
return ("Intel Lynx Point USB 3.0 controller");
+ case 0x9c318086:
+ return ("Intel Panther Point USB 3.0 controller");
default:
break;
@@ -239,6 +241,7 @@
switch (pci_get_devid(self)) {
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
+ case 0x9c318086: /* Panther Point */
sc->sc_port_route = &xhci_pci_port_route;
break;
default:
>Release-Note:
>Audit-Trail:
>Unformatted:
From owner-freebsd-usb@FreeBSD.ORG Sun Feb 16 14:40:01 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@smarthost.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 78297BC7
for <freebsd-usb@smarthost.ysv.freebsd.org>;
Sun, 16 Feb 2014 14:40:01 +0000 (UTC)
Received: from freefall.freebsd.org (freefall.freebsd.org
[IPv6:2001:1900:2254:206c::16:87])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id 6529312E0
for <freebsd-usb@smarthost.ysv.freebsd.org>;
Sun, 16 Feb 2014 14:40:01 +0000 (UTC)
Received: from freefall.freebsd.org (localhost [127.0.0.1])
by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s1GEe1vT099923
for <freebsd-usb@freefall.freebsd.org>; Sun, 16 Feb 2014 14:40:01 GMT
(envelope-from gnats@freefall.freebsd.org)
Received: (from gnats@localhost)
by freefall.freebsd.org (8.14.8/8.14.8/Submit) id s1GEe1Wm099922;
Sun, 16 Feb 2014 14:40:01 GMT (envelope-from gnats)
Date: Sun, 16 Feb 2014 14:40:01 GMT
Message-Id: <201402161440.s1GEe1Wm099922@freefall.freebsd.org>
To: freebsd-usb@FreeBSD.org
Cc:
From: dfilter@FreeBSD.ORG (dfilter service)
Subject: Re: usb/186811: commit references a PR
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
Reply-To: dfilter service <dfilter@FreeBSD.ORG>
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Sun, 16 Feb 2014 14:40:01 -0000
The following reply was made to PR usb/186811; it has been noted by GNATS.
From: dfilter@FreeBSD.ORG (dfilter service)
To: bug-followup@FreeBSD.org
Cc:
Subject: Re: usb/186811: commit references a PR
Date: Sun, 16 Feb 2014 14:37:31 +0000 (UTC)
Author: hselasky
Date: Sun Feb 16 14:37:23 2014
New Revision: 261981
URL: http://svnweb.freebsd.org/changeset/base/261981
Log:
Add new PCI ID for hardware which needs port routing for USB 3.0.
PR: usb/186811
MFC after: 1 week
Submitted by: Philipp Maechler <philipp.maechler@mamo.li>
Modified:
head/sys/dev/usb/controller/xhci_pci.c
Modified: head/sys/dev/usb/controller/xhci_pci.c
==============================================================================
--- head/sys/dev/usb/controller/xhci_pci.c Sun Feb 16 14:35:19 2014 (r261980)
+++ head/sys/dev/usb/controller/xhci_pci.c Sun Feb 16 14:37:23 2014 (r261981)
@@ -102,6 +102,7 @@ xhci_pci_match(device_t self)
case 0x10421b21:
return ("ASMedia ASM1042 USB 3.0 controller");
+ case 0x9c318086:
case 0x1e318086:
return ("Intel Panther Point USB 3.0 controller");
case 0x8c318086:
@@ -237,6 +238,7 @@ xhci_pci_attach(device_t self)
/* On Intel chipsets reroute ports from EHCI to XHCI controller. */
switch (pci_get_devid(self)) {
+ case 0x9c318086: /* Panther Point */
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
sc->sc_port_route = &xhci_pci_port_route;
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscribe@freebsd.org"
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 03:09:11 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@smarthost.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 10B51E5B;
Mon, 17 Feb 2014 03:09:11 +0000 (UTC)
Received: from freefall.freebsd.org (freefall.freebsd.org
[IPv6:2001:1900:2254:206c::16:87])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id D5FCF1C14;
Mon, 17 Feb 2014 03:09:10 +0000 (UTC)
Received: from freefall.freebsd.org (localhost [127.0.0.1])
by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s1H39APU064165;
Mon, 17 Feb 2014 03:09:10 GMT
(envelope-from eadler@freefall.freebsd.org)
Received: (from eadler@localhost)
by freefall.freebsd.org (8.14.8/8.14.8/Submit) id s1H39AZt064164;
Mon, 17 Feb 2014 03:09:10 GMT (envelope-from eadler)
Date: Mon, 17 Feb 2014 03:09:10 GMT
Message-Id: <201402170309.s1H39AZt064164@freefall.freebsd.org>
To: eadler@FreeBSD.org, freebsd-usb@FreeBSD.org, eadler@FreeBSD.org
From: eadler@FreeBSD.org
Subject: Re: usb/186811: Intel NUC Haswell Generation USB 3 support (solution
attached)
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 03:09:11 -0000
Synopsis: Intel NUC Haswell Generation USB 3 support (solution attached)
Responsible-Changed-From-To: freebsd-usb->eadler
Responsible-Changed-By: eadler
Responsible-Changed-When: Mon Feb 17 03:09:10 UTC 2014
Responsible-Changed-Why:
I'll take it.
http://www.freebsd.org/cgi/query-pr.cgi?pr=186811
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 11:06:58 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@FreeBSD.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 60D71E0B
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 11:06:58 +0000 (UTC)
Received: from freefall.freebsd.org (freefall.freebsd.org
[IPv6:2001:1900:2254:206c::16:87])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id 42B9E11DA
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 11:06:58 +0000 (UTC)
Received: from freefall.freebsd.org (localhost [127.0.0.1])
by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id s1HB6wTi033254
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 11:06:58 GMT
(envelope-from owner-bugmaster@FreeBSD.org)
Received: (from gnats@localhost)
by freefall.freebsd.org (8.14.8/8.14.8/Submit) id s1HB6v3M033252
for freebsd-usb@FreeBSD.org; Mon, 17 Feb 2014 11:06:57 GMT
(envelope-from owner-bugmaster@FreeBSD.org)
Date: Mon, 17 Feb 2014 11:06:57 GMT
Message-Id: <201402171106.s1HB6v3M033252@freefall.freebsd.org>
X-Authentication-Warning: freefall.freebsd.org: gnats set sender to
owner-bugmaster@FreeBSD.org using -f
From: FreeBSD bugmaster <bugmaster@freebsd.org>
To: freebsd-usb@FreeBSD.org
Subject: Current problem reports assigned to freebsd-usb@FreeBSD.org
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 11:06:58 -0000
Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).
The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.
S Tracker Resp. Description
--------------------------------------------------------------------------------
o usb/186317 usb ums module not loaded by devd for Razer Lachesis mouse
o usb/186110 usb connected over USB, only first document is printed
o usb/185968 usb PocketBook Pro 912 USB connection problem
o usb/185838 usb Sony DSC-H5 not connecting on USB
o usb/185837 usb [umass] Pendrive Kingston DataTraveler 8G not recogniz
o usb/185747 usb Patcf that fix support for USB key "Kingston DT 101 G2
o usb/185628 usb usbd_req_re_enumerate set address failed USB_ERR_STALL
o kern/185208 usb (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
o usb/184014 usb USB storage devices do not work in FreeBSD 9.2 or high
o usb/183728 usb libusb20 examples filenames cause problems on windows.
o usb/183505 usb [usb] Arduino Leonardo exposes three interface descrip
f usb/183409 usb USB Class 2 audio device playback issue
o usb/183302 usb USB no proper work
o usb/183090 usb Logitech USB microphone failure
o usb/182820 usb usbusX if destroy page fault panic
o usb/182361 usb [panic] Suspend when using USB disc as root causes ker
o usb/181987 usb USB isochronous transfer of the USB driver (Mentor Gra
o usb/181425 usb USB keyboard with full N-key rollover not working
o usb/181159 usb Problem attaching USB device
o usb/180837 usb [scsi_da] [patch] Kingston DT 101 G2 usb stick quirk (
o usb/180726 usb XHCI umass support breaks between r248085 and r252560
o usb/180657 usb [PATCH] Filco Majestouch 2 keyboard recognized as keyb
o usb/180617 usb New quirk (another member of Western Digital My Passpo
o usb/180254 usb FreeBSD 9.1 on 384GB memory server
o usb/180119 usb FreeBSD 9.1 umass driver does not correctly handle Pan
o usb/179505 usb Kernel detaches Arduino Leonardo (and similar) board u
o usb/179342 usb Freebsd 10.0-current USB 3.0 not working (xhci_do_coma
o usb/179109 usb After detach USB Flash a keyboard does not work.
o usb/179107 usb [usb] After detach USB Flash a keyboard does not work.
o usb/178771 usb [usbdevs] [patch] Western Digital My Passport HD
o usb/178722 usb FreeBSD 9.1-STABLE r250561 breaks support for webcam L
o usb/178267 usb [usb] USB causing interrupt storm on irq16
o usb/177897 usb [u3g][patch] add support for the Huawei E352 modem
o usb/177896 usb man page for usb_quirk suggests adding device to kerne
o usb/177895 usb similar 1TB Western Digital "My Passports" - some load
o usb/177666 usb [usbdevs] [patch] Add support for Texas Instruments /
o usb/176913 usb [ehci] High interrupt load with ehci
o usb/176841 usb [umass] Sony DSC-H2 USB connection fails
o usb/176417 usb [xhci][cam][umass] kernelpanic while removing plugged
o usb/175731 usb detaching USB keyboard freezes other USB keyboards
o usb/175639 usb not detect usb netcard D-LINK DUB-E100 rev C1
o usb/175599 usb [usbdevs][patch]Liebert UPS PSI1000 being assigned uhi
o usb/175551 usb Seagate 2TB USB extern hard disk have errors with Free
o usb/175379 usb usb card-reader problem
o usb/175302 usb don't mount virtual driver CD for my phone
o usb/174963 usb buffalo wli-uc-gn wireless card sometimes unusable and
o usb/174835 usb uaudio fails to create pcm/dsp device file
o usb/174814 usb [PATCH] support for MiFi 2200
o usb/174695 usb usb keeps disconnecting mouse or keyboard
o usb/174575 usb Interrupt storm error on startup
o usb/174464 usb clone MAC address(es) on usb networks cdce(4) && ue[0-
o usb/174254 usb MIDI keyboard not recognised
o usb/173722 usb [xhci] xhci driver bug after suspend to RAM (ACPI S3 m
o usb/173616 usb LG USB DVD-RW USB STALL
o usb/173182 usb usbus appears as a network device
o usb/172937 usb FreeBSD 9.1-RC2 usb3 port disconnects
o usb/172633 usb Sony Cybershot not recognized as USB mem stick
o usb/172199 usb [xhci] high interrupts load xhci
o usb/171354 usb [umass] Medium not present error on flash drive [regre
o usb/171262 usb plug in sdhc via usb reader reboots machine
o usb/171197 usb ADATA Classic CH11 USB HDD doesn't work in FreeBSD 9.1
o usb/170699 usb FreeBSD 9.0 Doesn't list HDD or its partitions in part
o usb/170688 usb patch][usbdevs][wlan] Patch for ASUS Black Diamond USB
o usb/170606 usb r239222 kernel panic at boot - usb locking issue
o usb/170358 usb [ums] Wrong (duplicate) button numbers
o usb/170123 usb [umass] HP v210w USB stick not supported
o usb/169935 usb [keyboard] Unable use USB keyboard while panic
o usb/169789 usb [u3g] [patch] add support for huawei e3131
o usb/169461 usb [ugen] USB2 high-speed device detected as full speed
o usb/169428 usb [ugen] ugen not detecting all endpoints on device [reg
o usb/168551 usb [umass] Issues with embedded card reader (Laptop ASUS
o usb/168132 usb [umass] MATSHITA memory card size reported wrong, moun
o usb/167847 usb [ural] dlink dwl-122g e crashes(?) when trying wap2 cr
o usb/167001 usb [USB] [PATCH] add support for Smart G2 64MB memory key
o usb/165163 usb [keyboard] The USB RF keyboard and mouse become non-re
o usb/164058 usb [umass] Lexar 8GB USB flash drive doesn't work by defa
f usb/163328 usb [usb] Support for Atheros USB abgn devices
o kern/163091 usb [panic] Fatal trap 12: page fault while in kernel mode
f usb/162306 usb usb devices cant get address asignation, no memories,
o usb/162054 usb usbdump just hangs on 9.0-RC1
f usb/161793 usb poor EHCI usb2 i/o performance
o usb/160436 usb ucom wedges machine on parity error ?
o usb/160299 usb MicroSDHC-to-USB adapters do not work in FreeBSD 8.x
o usb/160192 usb [install] Installation from USB-Stick doesn't find the
o usb/159274 usb USB 3.0 Etron EJ168A does not work.
f usb/159191 usb [fusefs-ntfs] write on fusefs-ntfs mounted partition r
o usb/157376 usb LaCie USB disk not recognized
o usb/157074 usb [boot] [usb8] vfs_mountroot_ask is called when no usb
o usb/156898 usb [keyboard] usb keyboard does not work while boot (ps2
f usb/156735 usb Need Quirk for Goflex USB Disk Drives
o usb/156726 usb [snd_uaudio]: snd_uaudio(4) fails to detach when mixer
o usb/156725 usb USB stack stall cause complete system input loss
o usb/156596 usb [ehci] Extremely high interrupt rate on ehci/uhci IRQ1
o usb/156000 usb rum(4) Fatal trap 18: integer divide fault while in ke
f usb/155996 usb NanoBSD not booted as Disk
o usb/155784 usb Problem with Transcend StoreJet 25M3 (2AJ1) on Asus M2
o usb/154753 usb [usbdevs] [patch] Support for Qualcomm USB modem/stora
o usb/154506 usb [umass] Copying dir with large files makes FreeBSD loa
o usb/154192 usb [umass] In Garmin Oregon GPS, only the first umass dev
o i386/153851 usb [keyboard] keyboard issues on new Intel Mother boards.
o usb/153703 usb [keyboard] My USB keyboard can not be used in 8-STABLE
o usb/153609 usb [zyd] [panic] kernel: Fatal trap 12: page fault while
f kern/153514 usb [cam] [panic] CAM related panic
o usb/153149 usb [umass] USB stick quirk regression [regression]
o usb/152075 usb [usb8] [ehci] [request] Add quirk for CS5536 USB
o usb/150892 usb [zyd] Whenever network contacted in any shape, way or
o usb/150189 usb [run] [usb8] [patch] if_run appears to corrupt IP traf
p usb/149764 usb [u3g] [patch] usbdevs update: Huawei K3765 3G modem
o usb/149283 usb [uftdi] avrdude unable to talk to Arduino board (via u
o usb/149162 usb [ural] ASUS WL-167g doesn't work in 8.1 (continue of 1
s usb/148702 usb [usb8] [request] IO DATA USB-RSAQ5 support on FreeBSD-
o usb/148080 usb usbconfig(8) sometimes does not turn off the device
o i386/147475 usb [install] FreeBSD 8.x does not install on ASUS K8N4-E
o usb/146840 usb [hang] FreeBSD 7.2 / 7.3 / 8.0 hang at startup after e
o usb/146153 usb [axe] [usb8] Hosts in network doesn't receive any pack
f usb/146054 usb [urtw] [usb8] urtw driver potentially out of date
f usb/145513 usb [usb8] New USB stack: no new devices after forced usb
p usb/145455 usb [usb8] [patch] USB debug support cannot be disabled
o usb/145415 usb [umass] [usb8] USB card reader does not create slices
a usb/145184 usb GENERIC can't mount root from USB on Asus EEE
o usb/145165 usb [keyboard] [usb8] ukbd_set_leds_callback: error=USB_ER
f kern/144938 usb [keyboard] [boot] Boot Failure with Apple (MB869LL/A)
o usb/144387 usb [run] [panic] if_run panic
o usb/144043 usb [umass] [usb8] USB DLT tape drive throws random errors
a usb/143790 usb [boot] [cam] can not boot from usb hdd
f usb/143620 usb [cdce] [usb8] the module if_cdce doesn't support my Op
f usb/143294 usb [usb8] copying process stops at some time (10 - 50 sec
o usb/143286 usb [ukbd] [usb8] [boot] boot failures on RELENG_8 system
p usb/143186 usb [usbdevs] [usb8] [patch] add USB device IDs for Google
a usb/143139 usb [umass] [usb8] [patch] Quirk for Century EX35SW4_SB4 J
p usb/143045 usb [umass] [usb8] [patch] mounting Fujitsu 2600Z camera d
f usb/142989 usb [usb8] canon eos 50D attaches but detaches after few s
f usb/142957 usb [umass] [usb8] [patch] patch for USB disk SYNCHRONIZE
o usb/142719 usb [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fa
f usb/142276 usb [umass] [usb8] Cache Synchronization Error with Olympu
o usb/142229 usb [ums] [usb8] [hang] connecting a USB mouse to a Dell P
f usb/141680 usb [uath] [usb8] Netgear WG111T not working with uath dri
o usb/141664 usb [pcm] [usb8] Logitech USB microphone failure [regressi
o usb/141474 usb [boot] [usb8] FreeBSD 8.0 can not install from USB CDR
o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER
o kern/141011 usb [usb8] Encrypted root, geli password at boot; enter ke
o usb/140920 usb [install] [usb8] USB based install fails on 8.0-RELEAS
o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b
o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0-
a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl
o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d
o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US
o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A
o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv
o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT
o kern/138292 usb [zyd] [usb8] "zyd0: device timeout" with ZyXEL G-202
o usb/138124 usb [snd_uaudio] [usb8] Axed uaudio functionality in the u
o usb/137377 usb [usb8] request support for Huawei E180
o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro
f usb/137190 usb [usb8][patch] inhibit spurious button releases for som
o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo
p usb/137188 usb [usb8][patch] correctly handle USB report descriptors
o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att
o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa
o usb/135206 usb machine reboots when inserted USB device
f usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu
o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible
o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g
o usb/134193 usb System freeze on usb MP3 player insertion
o usb/134085 usb [umass] [patch] Adding usb quirk for Sony USB flash dr
o usb/133989 usb [usb8] [ukbd] USB keyboard dead at mountroot> prompt
o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa
o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache
o usb/133296 usb [rum] driver not working properly in hostap mode
o usb/132594 usb USB subsystem causes page fault and crashes
o usb/132080 usb [patch] [usb] [rum] [panic] Kernel panic after NOMEM c
o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760
o usb/132036 usb [panic] page fault when connecting Olympus C740 camera
o usb/131583 usb [umass] Failure when detaching umass Device
o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data
o usb/131521 usb Registering Belkin UPS to usb_quirks.c
o usb/131074 usb no run-time detection of usb devices plugged into exte
o usb/130736 usb Page fault unplugging USB stick
o usb/130208 usb Boot process severely hampered by umass0 error
o usb/130122 usb [usb8] DVD drive detects as 'da' device
f usb/129766 usb [usb] [panic] plugging in usb modem HUAWEI E226 panics
o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis
o usb/129311 usb [usb] [panic] Instant crash with an USB card reader
f usb/128745 usb [zyd] zyd theoretically supported usb device makes ker
o usb/128485 usb [umodem] [patch] Nokia N80 modem support
o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive
o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like
o usb/127926 usb [boot] USB Timeout during bootup
o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support
o usb/127248 usb [ucom] panic while uplcom devices attach and detach
o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c
o usb/126848 usb [usb]: USB Keyboard hangs during Installation
o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be
o usb/126519 usb [usb] [panic] panic when plugging in an iphone
o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device
o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite
o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d
f usb/125450 usb [panic] Removing USB flash card while being accessed c
o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U
o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi
o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe
o usb/124758 usb [rum] [panic] rum panics SMP kernel
o usb/124708 usb [panic] Kernel panic on USB KVM reattach
o kern/124130 usb [usb] gmirror fails to start usb devices that were pre
o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile
o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with
o usb/123691 usb usbd(8): usbd hangs
o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l
o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U
o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um
o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt
o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa
o usb/122547 usb [ehci] USB Printer not being recognized after reboot
o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci
o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE
o usb/122119 usb [umass] umass device causes creation of daX but not da
o usb/121734 usb [ugen] ugen HP1022 printer device not working since up
o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k
o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s
o usb/121169 usb [umass] Issues with usb mp3 player
o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS
f usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det
o usb/120729 usb [panic] fault while in kernel mode with connecting USB
o conf/120406 usb [devd] [patch] Handle newly attached pcm devices (eg.
o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo
o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou
o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5
o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou
o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch
o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression]
o usb/119509 usb [usb] USB flaky on Dell Optiplex 755
o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress
o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun
o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer
o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se
o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread
o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi
o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin
o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS
o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE
o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS
o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work
o usb/117893 usb [umass] Lacie USB DVD writing failing
o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory
o usb/117598 usb [snd_uaudio] [patch] Not possible to record with Plant
o usb/117313 usb [umass] [panic] panic on usb camera insertion
o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a
f usb/117150 usb [zyd] usb zyd device under moderate load panics system
o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee
o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300
o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches
o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI
o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel
o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui
o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco
o usb/114682 usb [umass] generic USB media-card reader unusable
o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker
o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff
o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar
o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3
o usb/97472 usb [cam] [patch] add support for Olympus C150,D390
s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2.
o usb/97175 usb [umass] [hang] USB cardreader hangs system
o usb/96457 usb [umass] [panic] fatback on umass = reboot
o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync
s usb/96120 usb [ums] [request] USB mouse not always detected
s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620
o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb
o usb/95037 usb [umass] USB disk not recognized on hot-plug.
o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk
o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI
o usb/94384 usb [panic] kernel panic with usb2 hardware
o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion
o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work
o usb/92852 usb [ums] [patch] Vertical scroll not working properly on
o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS
o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb
o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE
o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand
o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg
f usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n
o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return "
o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work
o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500
o usb/91283 usb [boot] [regression] booting very slow with usb devices
o usb/91238 usb [umass] USB tape unit fails to write a second tape fil
o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas
o usb/89954 usb [umass] [panic] USB Disk driver race condition?
o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg
o usb/88408 usb [axe] axe0 read PHY failed
o usb/87648 usb [mouse] Logitech USB-optical mouse problem.
f usb/87224 usb [usb] Cannot mount USB Zip750
o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the
o usb/86298 usb [mouse] Known good USB mouse won't work with correct s
s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device
o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN
o usb/83863 usb [ugen] Communication problem between opensc/openct via
o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe
o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent
o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected
o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack
o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci
o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55.
s usb/80777 usb [request] usb_rem_task() should wait for callback to c
s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_
o usb/80774 usb [patch] have "usbd_find_desc" in line with the other "
o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails
f usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze
o usb/79723 usb [usb] [request] prepare for high speed isochronous tra
o usb/78984 usb [umass] [patch] Creative MUVO umass failure
o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device
s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade
o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn
o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for
s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL
o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R
f usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati
f usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n
o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1
o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes
o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports
o usb/67301 usb [uftdi] [panic] RTS and system panic
o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct
s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s
s usb/52026 usb [new driver] [request] umass driver support for InSyst
s usb/51958 usb [urio] [patch] update for urio driver
o usb/40948 usb [umass] [request] USB HP CDW8200 does not work
o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem
328 problems total.
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 15:06:51 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@FreeBSD.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id B42A8B17
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 15:06:51 +0000 (UTC)
Received: from ratatosk.b1t.name (ratatosk.b1t.name [46.150.100.6])
by mx1.freebsd.org (Postfix) with ESMTP id 6DC8F1B89
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 15:06:51 +0000 (UTC)
Received: from limbo.b1t.lan (limbo.b1t.lan [172.29.1.15])
by ratatosk.b1t.name (Postfix) with ESMTPSA id EC587264;
Mon, 17 Feb 2014 17:06:41 +0200 (EET)
Message-ID: <53022581.7090409@b1t.name>
Date: Mon, 17 Feb 2014 17:06:41 +0200
From: Volodymyr Kostyrko <arcade@b1t.name>
User-Agent: Mozilla/5.0 (X11; FreeBSD amd64;
rv:24.0) Gecko/20100101 Thunderbird/24.3.0
MIME-Version: 1.0
To: Hans Petter Selasky <hps@bitfrost.no>, freebsd-usb@FreeBSD.org
Subject: Re: new usb device probably, needs quirks
References: <52FB98DA.6080108@b1t.name> <52FDD1E8.7040804@bitfrost.no>
In-Reply-To: <52FDD1E8.7040804@bitfrost.no>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 15:06:51 -0000
14.02.2014 10:20, Hans Petter Selasky wrote:
> On 02/12/14 16:52, Volodymyr Kostyrko wrote:
>> Hi all.
>>
>> # usbconfig -d 5.2 dump_device_desc
>> ugen5.2: <USB Flash Memory vendor 0x0930> at usbus5, cfg=0 md=HOST
>> spd=HIGH (480Mbps) pwr=ON (200mA)
>>
>> bLength = 0x0012
>> bDescriptorType = 0x0001
>> bcdUSB = 0x0200
>> bDeviceClass = 0x0000
>> bDeviceSubClass = 0x0000
>> bDeviceProtocol = 0x0000
>> bMaxPacketSize0 = 0x0040
>> idVendor = 0x0930
>> idProduct = 0x6544
>> bcdDevice = 0x0100
>> iManufacturer = 0x0001 < >
>> iProduct = 0x0002 <USB Flash Memory>
>> iSerialNumber = 0x0003 <E954F90DBA26CC60EDC50A0F>
>> bNumConfigurations = 0x0001
> Can you send a patch adding this quirk to:
>
> sys/dev/usb/quirk/usb_quirk.c
>
> And vendor and product IDs to:
>
> sys/dev/usb/usbdevs
>
> Which you have tested?
>
> Thank you,
>
> --HPS
>
Probably I wouldn't dare to send patch... The drive is too far from me,
something like ~600 km's at some hosting company datacenter. Citing the
internet 0930 is "Toshiba Corp." and 6544 is "Kingston DataTraveler 2GB"
whereas my hosting provider states that actually flash drive looks
exactly like Goodram twister. Been uncertain of drive's origins I'll
think I can't claim my solution been perfect.
--
Sphinx of black quartz judge my vow.
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 15:54:26 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id C7A60FA5
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 15:54:26 +0000 (UTC)
Received: from www94.your-server.de (www94.your-server.de [213.133.104.94])
(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id 864DC1126
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 15:54:25 +0000 (UTC)
Received: from [92.230.240.70] (helo=[192.168.178.40])
by www94.your-server.de with esmtpsa (TLSv1:AES128-SHA:128)
(Exim 4.74) (envelope-from <Mathias.Picker@virtual-earth.de>)
id 1WFQWV-0001mV-G8
for freebsd-usb@freebsd.org; Mon, 17 Feb 2014 16:54:23 +0100
Subject: Reiner SCT RFID unknown device id?
From: Mathias Picker <Mathias.Picker@virtual-earth.de>
To: freebsd-usb@freebsd.org
Content-Type: text/plain; charset="UTF-8"
Organization: virtual earth GmbH
Date: Mon, 17 Feb 2014 16:54:19 +0100
Message-ID: <1392652459.2305.16.camel@marcopolo.fritz.box>
Mime-Version: 1.0
X-Mailer: Evolution 2.32.1 FreeBSD GNOME Team Port
Content-Transfer-Encoding: 7bit
X-Authenticated-Sender: Mathias.Picker@virtual-earth.de
X-Virus-Scanned: Clear (ClamAV 0.97.8/18486/Mon Feb 17 16:04:27 2014)
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 15:54:26 -0000
I just found a used Reiner SCT RFID
(http://www.reiner-sct.com/produkte/chipkartenleser/cyberJack_RFID_standard.html) and bought it, hoping I could get it to work in FreeBSD.
When connecting I found this in the log:
Feb 17 16:44:10 marcopolo kernel: ugen5.2: <REINER SCT> at usbus5
Feb 17 16:44:10 marcopolo devd: Executing 'logger Unknown USB device:
vendor 0x0c4b product 0x0500 bus uhub4'
Feb 17 16:44:10 marcopolo mathiasp: Unknown USB device: vendor 0x0c4b
product 0x0500 bus uhub4
This 0x0c4b/0x0500 is actually the reiner sct, so why is this "unknown
USB device" shown? usbconfig shows it just fine:
marcopolo# usbconfig -d 5.2
ugen5.2: <cyberJack RFID standard REINER SCT> at usbus5, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON (192mA)
Also, has anyone tried to get this up and running on FreeBSD? pcscd with
libccid does not find it, and googling I only find information about
Reiner's proprietary linux driver...
Thanks, Mathias
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 16:09:54 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 6E15DB16
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 16:09:54 +0000 (UTC)
Received: from g2host.com (mailfront4.g2host.com [208.42.184.242])
by mx1.freebsd.org (Postfix) with ESMTP id CD6F81271
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 16:09:52 +0000 (UTC)
Received: from [71.220.70.240] (account cjd@small-tree.com HELO cjd.local)
by mailfront4.g2host.com (CommuniGate Pro SMTP 5.3.11)
with ESMTPSA id 142950890; Mon, 17 Feb 2014 10:09:45 -0600
Message-ID: <53023448.3090509@small-tree.com>
Date: Mon, 17 Feb 2014 10:09:44 -0600
From: Chris Duffy <cjd@small-tree.com>
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9;
rv:24.0) Gecko/20100101 Thunderbird/24.3.0
MIME-Version: 1.0
To: Hans Petter Selasky <hps@bitfrost.no>, freebsd-usb@freebsd.org
Subject: Re: Question on Freebsd 9.1, usb interface to a UPSonic CXR 2000
using NUT code.
References: <52FBAF6A.5000304@small-tree.com> <52FDD24F.40904@bitfrost.no>
In-Reply-To: <52FDD24F.40904@bitfrost.no>
Content-Type: multipart/mixed; boundary="------------030902020204050202070601"
Cc: cjd@small-tree.com
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 16:09:54 -0000
This is a multi-part message in MIME format.
--------------030902020204050202070601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Thx,
I tried the:
For ugen1.3 run:
usbdump -i usbus1 -f 3 -s 65536 -vvv
But it filtered out all packets.
I then tried:
usbdump -i usbus1 -s 65536 -vvv
and it did get a lot of packets....
I have attached the file....do the packets make
any sense and tell you anything?
Thx
chris
On 2/14/14, 2:22 AM, Hans Petter Selasky wrote:
> On 02/12/14 18:29, Chris Duffy wrote:
>> I have a customer of mine that just bought a
>>
>> UPSonic CXR 2000
>>
>> and is trying to connect the usb cable from this UPS
>> to a Freebsd 9.1 system running the 2.6.5 NUT code.
>> Freebsd/NUT does not see the device properly.
>>
>> I have also been working with the NUT people and
>> they suggested that I discuss this issue with the freebsd-usb
>> folks.....
>>
>> Here are some command output that the NUT people asked for
>> and after seeing it, they think it may be a bug on Freebsd
>> so here I am asking for help :) They also stated that they
>> had thought that others may have gotten the blazer_usb
>> driver to work properly on Freebsd but........
>>
>> I deactivated the uhidd stuff since NUT suggested this
>> in order to get more debug info....
>>
>>
>> # uhidd -v -u /dev/ugen1.3
>>
>> ugen1.3[0]-> Report descriptor size = 27
>> ugen1.3[0]-> Kernel driver is active
>> ugen1.3[0]-> kernel driver detached!
>> ugen1.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8
>>
>>
>> # /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -DDDD
>>
>> 0.000000 debug level is '4'
>> 0.176793 Checking device (06DA/0005) (/dev/usb//dev/ugen1.3)
>> 0.183672 - VendorID: 06da
>> 0.183696 - ProductID: 0005
>> 0.183699 - Manufacturer: PPC
>> 0.183703 - Product: USB UPS
>> 0.183707 - Serial Number: unknown
>> 0.183710 - Bus: /dev/usb
>> 0.183714 Trying to match device
>> 0.183718 Device matches
>> 0.183746 Trying megatec protocol...
>> 0.184566 send: Q1
>> 0.423946 read: (239.3 239.3 229.9 027 50.0 2.19 22.8 00000001
>> 0.423988 Status read in 1 tries
>> 0.424000 Supported UPS detected with megatec protocol
>> 1.455927 send: Unknown error
>> 1.455973 Permissions problem: Input/output error
>>
>>
>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.09
>> (2.6.5-Unversioned directory)
>>
>> I have checked all the ownership/permissions on the /dev
>> related files and confirmed with NUT the proper stuff....
>>
>> Is there something I am missing to support the usb attachment
>> for UPS driver for this particular UPS?
>>
>> Thx for any pointers/help.
>
> Hi,
>
> For ugenX.Y run:
>
> usbdump -i usbusX -f Y -s 65536 -vvv
>
> And you will see right away what USB traffic is causing the problem.
>
> --HPS
>
>
>
--
Chris Duffy
Product Support
Small Tree Communications
www.small-tree.com
Direct 651-209-6509 X305
Mobil 651-303-9613
Skype:cjdwoodbury
Yahoo:chris_duffy6288
AIM/Google:cjdwoodbury@gmail.com
--------------030902020204050202070601
Content-Type: text/plain; charset=UTF-8; x-mac-type="0"; x-mac-creator="0";
name="out"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="out"
03:02:46.771751 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.771906 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.771945 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772025 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772055 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772158 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772191 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772273 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772302 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772400 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772418 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772523 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772537 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772658 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772689 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:46.772771 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.771744 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.771836 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.771867 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.771957 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.771977 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772081 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772102 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772208 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772237 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772319 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772334 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772456 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772484 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772568 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772583 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:50.772708 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.771749 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.771877 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.771911 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772006 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772037 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772131 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772161 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772245 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772261 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772371 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772409 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772491 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772507 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772630 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772659 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:54.772741 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.771750 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.771924 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.771957 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772055 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772085 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772180 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772211 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772293 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772322 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772419 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772437 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772541 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772556 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772678 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772709 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:02:58.772790 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.771758 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.771853 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.771886 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.771966 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.771995 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772092 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772114 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772227 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772257 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772338 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772353 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772475 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772502 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772588 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772602 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:02.772726 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.771743 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.771893 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.771935 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772016 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772037 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772148 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772169 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772267 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772284 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772391 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772427 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772513 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772527 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772650 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772669 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:06.772768 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651242 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651318 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651335 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651441 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651461 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651566 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651586 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651691 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651711 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651827 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651855 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651937 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.651951 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.652074 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.652101 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:10.652188 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651244 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651370 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651414 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651490 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651511 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651615 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651636 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651747 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651776 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651869 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651896 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.651985 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.652000 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.652123 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.652150 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:14.652236 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651244 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651418 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651458 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651538 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651578 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651662 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651694 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651797 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651827 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651911 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.651941 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.652042 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.652056 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.652173 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.652201 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:18.652283 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651246 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651341 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651371 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651470 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651501 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651583 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651616 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651720 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651741 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651842 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651860 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651963 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.651977 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.652096 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.652122 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:22.652206 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651260 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 01 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651391 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 03 03 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651430 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 02 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651510 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651531 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 03 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651640 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651661 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 04 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651758 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651775 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 05 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651892 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.651922 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 06 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.652004 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.652018 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 07 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.652142 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.652169 usbus1.2 SUBM-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=8,IVAL=0
frame[0] WRITE 8 bytes
0000 A3 00 00 00 08 00 04 00 -- -- -- -- -- -- -- -- |........ |
frame[1] READ 4 bytes
flags 0x10 <PROXY_BUFFER|0>
status 0xca1a3 <OPEN|TRANSFERRING|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
03:03:26.652255 usbus1.2 DONE-CTRL-EP=00000080,SPD=HIGH,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 4 bytes
0000 00 01 00 00 -- -- -- -- -- -- -- -- -- -- -- -- |.... |
flags 0x10 <PROXY_BUFFER|0>
status 0xea1a1 <OPEN|STARTED|CONTROL_XFR|CONTROL_HDR|BDMA_ENABLE|BDMA_SETUP|CURR_DMA_SET|CAN_CANCEL_IMMED|DOING_CALLBACK|0>
176 packets captured
176 packets received by filter
0 packets dropped by kernel
--------------030902020204050202070601--
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 20:08:57 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 3D31044D
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 20:08:57 +0000 (UTC)
Received: from mta05.bitpro.no (mta05.bitpro.no [92.42.64.202])
by mx1.freebsd.org (Postfix) with ESMTP id BD8611B00
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 20:08:56 +0000 (UTC)
Received: from mail.lockless.no (mail.lockless.no [46.29.221.38])
by mta05.bitpro.no (Postfix) with ESMTPS id 0F57917F84C;
Mon, 17 Feb 2014 21:08:54 +0100 (CET)
Received: from localhost (localhost [127.0.0.1])
by mail.lockless.no (Postfix) with ESMTP id 978DE1619C2;
Mon, 17 Feb 2014 21:09:50 +0100 (CET)
X-Virus-Scanned: by amavisd-new-2.6.4 (20090625) (Debian) at lockless.no
Received: from mail.lockless.no ([127.0.0.1])
by localhost (mail.lockless.no [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id SwiLnKubcP2a; Mon, 17 Feb 2014 21:09:49 +0100 (CET)
Received: from laptop015.home.selasky.org
(cm-176.74.213.204.customer.telag.net [176.74.213.204])
by mail.lockless.no (Postfix) with ESMTPSA id A69311619C1;
Mon, 17 Feb 2014 21:09:49 +0100 (CET)
Message-ID: <53026C8C.5060005@bitfrost.no>
Date: Mon, 17 Feb 2014 21:09:48 +0100
From: Hans Petter Selasky <hps@bitfrost.no>
Organization: Bitfrost A/S
User-Agent: Mozilla/5.0 (X11; FreeBSD amd64;
rv:24.0) Gecko/20100101 Thunderbird/24.1.0
MIME-Version: 1.0
To: Chris Duffy <cjd@small-tree.com>, freebsd-usb@freebsd.org
Subject: Re: Question on Freebsd 9.1, usb interface to a UPSonic CXR 2000
using NUT code.
References: <52FBAF6A.5000304@small-tree.com> <52FDD24F.40904@bitfrost.no>
<53023448.3090509@small-tree.com>
In-Reply-To: <53023448.3090509@small-tree.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 20:08:57 -0000
On 02/17/14 17:09, Chris Duffy wrote:
> Thx,
>
> I tried the:
>
> For ugen1.3 run:
>
> usbdump -i usbus1 -f 3 -s 65536 -vvv
>
> But it filtered out all packets.
>
> I then tried:
>
> usbdump -i usbus1 -s 65536 -vvv
>
> and it did get a lot of packets....
> I have attached the file....do the packets make
> any sense and tell you anything?
>
> Thx
> chris
>
>
>
> On 2/14/14, 2:22 AM, Hans Petter Selasky wrote:
>> On 02/12/14 18:29, Chris Duffy wrote:
>>> I have a customer of mine that just bought a
>>>
>>> UPSonic CXR 2000
>>>
>>> and is trying to connect the usb cable from this UPS
>>> to a Freebsd 9.1 system running the 2.6.5 NUT code.
>>> Freebsd/NUT does not see the device properly.
>>>
>>> I have also been working with the NUT people and
>>> they suggested that I discuss this issue with the freebsd-usb
>>> folks.....
>>>
>>> Here are some command output that the NUT people asked for
>>> and after seeing it, they think it may be a bug on Freebsd
>>> so here I am asking for help :) They also stated that they
>>> had thought that others may have gotten the blazer_usb
>>> driver to work properly on Freebsd but........
>>>
>>> I deactivated the uhidd stuff since NUT suggested this
>>> in order to get more debug info....
>>>
>>>
>>> # uhidd -v -u /dev/ugen1.3
>>>
>>> ugen1.3[0]-> Report descriptor size = 27
>>> ugen1.3[0]-> Kernel driver is active
>>> ugen1.3[0]-> kernel driver detached!
>>> ugen1.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8
>>>
>>>
>>> # /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -DDDD
>>>
>>> 0.000000 debug level is '4'
>>> 0.176793 Checking device (06DA/0005) (/dev/usb//dev/ugen1.3)
>>> 0.183672 - VendorID: 06da
>>> 0.183696 - ProductID: 0005
>>> 0.183699 - Manufacturer: PPC
>>> 0.183703 - Product: USB UPS
>>> 0.183707 - Serial Number: unknown
>>> 0.183710 - Bus: /dev/usb
>>> 0.183714 Trying to match device
>>> 0.183718 Device matches
>>> 0.183746 Trying megatec protocol...
>>> 0.184566 send: Q1
>>> 0.423946 read: (239.3 239.3 229.9 027 50.0 2.19 22.8 00000001
>>> 0.423988 Status read in 1 tries
>>> 0.424000 Supported UPS detected with megatec protocol
>>> 1.455927 send: Unknown error
>>> 1.455973 Permissions problem: Input/output error
>>>
>>>
>>> Network UPS Tools - Megatec/Q1 protocol USB driver 0.09
>>> (2.6.5-Unversioned directory)
>>>
>>> I have checked all the ownership/permissions on the /dev
>>> related files and confirmed with NUT the proper stuff....
>>>
>>> Is there something I am missing to support the usb attachment
>>> for UPS driver for this particular UPS?
>>>
>>> Thx for any pointers/help.
>>
>> Hi,
>>
>> For ugenX.Y run:
>>
>> usbdump -i usbusX -f Y -s 65536 -vvv
>>
>> And you will see right away what USB traffic is causing the problem.
>>
>> --HPS
>>
Hi,
I don't see any errors in the USB log. The usbdump needs to be started
before you plug the device and before starting blazer_usb. Also you need
to find the exact bus and "-f" device number which corresponds to your
device. Use usbconfig to find this information.
Can you:
ktrace /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -DDDD
When finished:
kdump | gzip > blazer_usb.log.gz
And send it to me off-list.
The USB trace looks normal.
--HPS
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 20:11:40 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 5E4E44AD
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 20:11:40 +0000 (UTC)
Received: from mta04.bitpro.no (mta04.bitpro.no [92.42.64.203])
by mx1.freebsd.org (Postfix) with ESMTP id 12D961B7F
for <freebsd-usb@freebsd.org>; Mon, 17 Feb 2014 20:11:39 +0000 (UTC)
Received: from mail.lockless.no (mail.lockless.no [46.29.221.38])
by mta04.bitpro.no (Postfix) with ESMTPS id 081E310020C;
Mon, 17 Feb 2014 21:11:38 +0100 (CET)
Received: from localhost (localhost [127.0.0.1])
by mail.lockless.no (Postfix) with ESMTP id 107AB1619C3;
Mon, 17 Feb 2014 21:12:34 +0100 (CET)
X-Virus-Scanned: by amavisd-new-2.6.4 (20090625) (Debian) at lockless.no
Received: from mail.lockless.no ([127.0.0.1])
by localhost (mail.lockless.no [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id rKcpUT59xNfG; Mon, 17 Feb 2014 21:12:33 +0100 (CET)
Received: from laptop015.home.selasky.org
(cm-176.74.213.204.customer.telag.net [176.74.213.204])
by mail.lockless.no (Postfix) with ESMTPSA id 115F81619B0;
Mon, 17 Feb 2014 21:12:33 +0100 (CET)
Message-ID: <53026D30.4040704@bitfrost.no>
Date: Mon, 17 Feb 2014 21:12:32 +0100
From: Hans Petter Selasky <hps@bitfrost.no>
Organization: Bitfrost A/S
User-Agent: Mozilla/5.0 (X11; FreeBSD amd64;
rv:24.0) Gecko/20100101 Thunderbird/24.1.0
MIME-Version: 1.0
To: Mathias Picker <Mathias.Picker@virtual-earth.de>, freebsd-usb@freebsd.org
Subject: Re: Reiner SCT RFID unknown device id?
References: <1392652459.2305.16.camel@marcopolo.fritz.box>
In-Reply-To: <1392652459.2305.16.camel@marcopolo.fritz.box>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 20:11:40 -0000
On 02/17/14 16:54, Mathias Picker wrote:
> I just found a used Reiner SCT RFID
> (http://www.reiner-sct.com/produkte/chipkartenleser/cyberJack_RFID_standard.html) and bought it, hoping I could get it to work in FreeBSD.
>
> When connecting I found this in the log:
>
> Feb 17 16:44:10 marcopolo kernel: ugen5.2: <REINER SCT> at usbus5
> Feb 17 16:44:10 marcopolo devd: Executing 'logger Unknown USB device:
> vendor 0x0c4b product 0x0500 bus uhub4'
> Feb 17 16:44:10 marcopolo mathiasp: Unknown USB device: vendor 0x0c4b
> product 0x0500 bus uhub4
>
> This 0x0c4b/0x0500 is actually the reiner sct, so why is this "unknown
> USB device" shown? usbconfig shows it just fine:
>
> marcopolo# usbconfig -d 5.2
> ugen5.2: <cyberJack RFID standard REINER SCT> at usbus5, cfg=0 md=HOST
> spd=FULL (12Mbps) pwr=ON (192mA)
>
>
> Also, has anyone tried to get this up and running on FreeBSD? pcscd with
> libccid does not find it, and googling I only find information about
> Reiner's proprietary linux driver...
>
> Thanks, Mathias
Hi,
Grep for "Unknown" in /etc/
It is coming from devd.
--HPS
From owner-freebsd-usb@FreeBSD.ORG Mon Feb 17 20:27:46 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@FreeBSD.org
Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id DCBA4F35
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 20:27:46 +0000 (UTC)
Received: from mta04.bitpro.no (mta04.bitpro.no [92.42.64.203])
by mx1.freebsd.org (Postfix) with ESMTP id 97A6C1CB4
for <freebsd-usb@FreeBSD.org>; Mon, 17 Feb 2014 20:27:46 +0000 (UTC)
Received: from mail.lockless.no (mail.lockless.no [46.29.221.38])
by mta04.bitpro.no (Postfix) with ESMTPS id EB732100216;
Mon, 17 Feb 2014 21:27:44 +0100 (CET)
Received: from localhost (localhost [127.0.0.1])
by mail.lockless.no (Postfix) with ESMTP id C89D01619BC;
Mon, 17 Feb 2014 21:28:40 +0100 (CET)
X-Virus-Scanned: by amavisd-new-2.6.4 (20090625) (Debian) at lockless.no
Received: from mail.lockless.no ([127.0.0.1])
by localhost (mail.lockless.no [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id Sdmc0DT-dgiL; Mon, 17 Feb 2014 21:28:39 +0100 (CET)
Received: from laptop015.home.selasky.org
(cm-176.74.213.204.customer.telag.net [176.74.213.204])
by mail.lockless.no (Postfix) with ESMTPSA id C01471619BB;
Mon, 17 Feb 2014 21:28:39 +0100 (CET)
Message-ID: <530270F6.1060909@bitfrost.no>
Date: Mon, 17 Feb 2014 21:28:38 +0100
From: Hans Petter Selasky <hps@bitfrost.no>
Organization: Bitfrost A/S
User-Agent: Mozilla/5.0 (X11; FreeBSD amd64;
rv:24.0) Gecko/20100101 Thunderbird/24.1.0
MIME-Version: 1.0
To: Volodymyr Kostyrko <arcade@b1t.name>, freebsd-usb@FreeBSD.org
Subject: Re: new usb device probably, needs quirks
References: <52FB98DA.6080108@b1t.name> <52FDD1E8.7040804@bitfrost.no>
<53022581.7090409@b1t.name>
In-Reply-To: <53022581.7090409@b1t.name>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Mon, 17 Feb 2014 20:27:46 -0000
On 02/17/14 16:06, Volodymyr Kostyrko wrote:
> 14.02.2014 10:20, Hans Petter Selasky wrote:
>> On 02/12/14 16:52, Volodymyr Kostyrko wrote:
>>> Hi all.
>>>
>>> # usbconfig -d 5.2 dump_device_desc
>>> ugen5.2: <USB Flash Memory vendor 0x0930> at usbus5, cfg=0 md=HOST
>>> spd=HIGH (480Mbps) pwr=ON (200mA)
>>>
>>> bLength = 0x0012
>>> bDescriptorType = 0x0001
>>> bcdUSB = 0x0200
>>> bDeviceClass = 0x0000
>>> bDeviceSubClass = 0x0000
>>> bDeviceProtocol = 0x0000
>>> bMaxPacketSize0 = 0x0040
>>> idVendor = 0x0930
>>> idProduct = 0x6544
>>> bcdDevice = 0x0100
>>> iManufacturer = 0x0001 < >
>>> iProduct = 0x0002 <USB Flash Memory>
>>> iSerialNumber = 0x0003 <E954F90DBA26CC60EDC50A0F>
>>> bNumConfigurations = 0x0001
>
>> Can you send a patch adding this quirk to:
>>
>> sys/dev/usb/quirk/usb_quirk.c
>>
>> And vendor and product IDs to:
>>
>> sys/dev/usb/usbdevs
>>
>> Which you have tested?
>>
>> Thank you,
>>
>> --HPS
>>
>
> Probably I wouldn't dare to send patch... The drive is too far from me,
> something like ~600 km's at some hosting company datacenter. Citing the
> internet 0930 is "Toshiba Corp." and 6544 is "Kingston DataTraveler 2GB"
> whereas my hosting provider states that actually flash drive looks
> exactly like Goodram twister. Been uncertain of drive's origins I'll
> think I can't claim my solution been perfect.
>
Hi,
Here is the patch:
http://svnweb.freebsd.org/changeset/base/262128
Hope it works for you!
--HPS
From owner-freebsd-usb@FreeBSD.ORG Tue Feb 18 05:57:42 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id E92AEAD4
for <freebsd-usb@freebsd.org>; Tue, 18 Feb 2014 05:57:41 +0000 (UTC)
Received: from nm38.bullet.mail.ne1.yahoo.com (nm38.bullet.mail.ne1.yahoo.com
[98.138.229.31])
(using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id A4CCE1FA2
for <freebsd-usb@freebsd.org>; Tue, 18 Feb 2014 05:57:41 +0000 (UTC)
Received: from [127.0.0.1] by nm38.bullet.mail.ne1.yahoo.com with NNFMP;
18 Feb 2014 05:57:34 -0000
Received: from [98.138.100.103] by nm38.bullet.mail.ne1.yahoo.com with NNFMP;
18 Feb 2014 05:54:34 -0000
Received: from [98.137.12.188] by tm102.bullet.mail.ne1.yahoo.com with NNFMP;
18 Feb 2014 05:54:34 -0000
Received: from [98.137.12.209] by tm9.bullet.mail.gq1.yahoo.com with NNFMP;
18 Feb 2014 05:54:34 -0000
Received: from [127.0.0.1] by omp1017.mail.gq1.yahoo.com with NNFMP;
18 Feb 2014 05:54:34 -0000
X-Yahoo-Newman-Property: ymail-4
X-Yahoo-Newman-Id: 824074.52402.bm@omp1017.mail.gq1.yahoo.com
Received: (qmail 68817 invoked by uid 60001); 18 Feb 2014 05:54:34 -0000
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=rocketmail.com; s=s1024;
t=1392702874; bh=t9lpGQ7lGEmYdN8W/B5WgXAdsch3x2jlzKrjQ5ZhFh4=;
h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:Message-ID:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=y/GNk77Qp+XVf0A/8hqaxQQgE697xhhuTGH1kmiSj6BjCtOFB7aLA/OjAm7f+yLj8Sy5mcBB3LDAMdbhcZ4D3j7iGx6gBRg9veThLoeSTTcMOaDXjQUmiZUgMLFCmyVZ0cE3FSYxEeq5NDoVYbUJv1PVAacQLAREK2N3guK1tnE=
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rocketmail.com;
h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:Message-ID:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=pTayAiWOJnqP7BdEEGNPxMs7HFMJiJJm9pndDtMjmuXGTvvWX1F+Vd6RwiRKKAvFpbd2/yK7YE/vxtvfVUfVggBnTawXWp5axmXHg92HoCsTO1GpO8geYJ9Q5ihL+u/zqDig32pUr7t1ujx5+kYXfA4nomfLPbSHbpptlOYyug4=;
X-YMail-OSG: L98uNJkVM1n8acp0dWdHT1mEOQVq40oPEKDlNsG08aQZ3CB
ouoIpw2jBOBJZbD90qZ79evQFMoG67libbtQOGDrdafG6JbqDU.sbG11UmB_
9OC4WdZt6jn4nENr91jcuQvKNDu3B9L0_1lrEpyuUPbRm7NxtMKd0967jXo6
d5P7TxV4hVdiwkGMEurfjNpeP1knNfe2F.z93QZydxxmvKn.8YyPfDirsoOg
03bzdyPlxVqDbelrB9wngD8vxOrfN5CDExrCgUeUGhPUKjQZtM.UyfIZGIR3
FTKdXildbRGEOQ42nP_E.sCW_hshq5_UlqXQqMUGoUAI83MhDYgp6r6gz4aR
QrgZrxzizOjI86kz71_Vl9KiGK2DFkui7rzf28A6qYIuN_ZYAtyY2BY8LLwm
FSBvTcjRSjbfP5Z0xw0I.Ch08zkLZvI92ZQWacRqsx390FzYRLzm6fo2fkbv
A15yFObuau4Z7cHQxRKNH62SYADhoLlE19FppEuTi8QxaT5MccqlkFnIPX43
Ajhjym8NT3vwuSezA6Tw4JTad5xQVT5gIgRNAY0H.wZBCI4XJHB_nkrkFQls -
Received: from [192.70.171.13] by web164504.mail.gq1.yahoo.com via HTTP;
Mon, 17 Feb 2014 21:54:34 PST
X-Rocket-MIMEInfo: 002.001,
SSdtIHRyeWluZyB0byBnZXQgb2ZmIHRhcGUgZHJpdmVzIGFuZCBtb3ZlIHRvIFVTQiBkcml2ZXMgZm9yIGJhY2t1cHMsIGhvd2V2ZXIgY2lyY3Vtc3RhbmNlcyBhcmUgbWFraW5nIHRoaXMgaW1wb3NzaWJsZS4KCkRvZXMgYW55b25lIGhhdmUgYSBzdWdnZXN0aW9uIGZvciBhIGtub3duIDFUQiBleHRlcm5hbCBVU0IgZHJpdmUsIHBvd2VyZWQgCnRocm91Z2ggdGhlIFVTQiBjYWJsZSwgdGhhdCBjb25zaXN0ZW50bHkgd29ya3Mgd2l0aCBGcmVlQlNELCBhbmQgaGFzIGZvciBzb21lIHRpbWU_CgpJJ3ZlIGdvbmUBMAEBAQE-
X-Mailer: YahooMailWebService/0.8.177.636
Message-ID: <1392702874.11017.YahooMailNeo@web164504.mail.gq1.yahoo.com>
Date: Mon, 17 Feb 2014 21:54:34 -0800 (PST)
From: Velcro Leaf <velcroleaf@rocketmail.com>
Subject: consistent, functional 1TB usb drive?
To: "freebsd-usb@FreeBSD.org" <freebsd-usb@FreeBSD.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
Reply-To: Velcro Leaf <velcroleaf@rocketmail.com>
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Tue, 18 Feb 2014 05:57:42 -0000
I'm trying to get off tape drives and move to USB drives for backups, howev=
er circumstances are making this impossible.=0A=0ADoes anyone have a sugges=
tion for a known 1TB external USB drive, powered =0Athrough the USB cable, =
that consistently works with FreeBSD, and has for some time?=0A=0AI've gone=
through half a dozen models of such drives and each time I find one that w=
orks properly on each of our servers, I try to buy a few more to make a com=
plete cycle.=A0 Invariably, however, I can no longer purchase the same mode=
l, or I can get the same model, but it is invisibly different at purchase-t=
ime (eg, with new firmware that doesn't work with FreeBSD).=0A=0A=0AI've tr=
ied to work through the quirks process with you guys, but it hasn't been su=
ccessful, and eventually I suppose it's not considered enough of a problem =
to fix, probably because in a few weeks there will be a brand new version t=
hat doesn't work, in a different way.=0A=0AI know that these drives are all=
tested with Windows before shipping, and that's why they work with Windows=
, but is there any plan, on either the hardware or FreeBSD side of things t=
o deal with this issue?=A0 I've been working on and off on the problem for =
about a year, and if anything, things are getting worse.=0A=0A-Leif=0A
From owner-freebsd-usb@FreeBSD.ORG Tue Feb 18 06:13:51 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@FreeBSD.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 2150EF23
for <freebsd-usb@FreeBSD.org>; Tue, 18 Feb 2014 06:13:51 +0000 (UTC)
Received: from mta04.bitpro.no (mta04.bitpro.no [92.42.64.203])
by mx1.freebsd.org (Postfix) with ESMTP id CFFD31110
for <freebsd-usb@FreeBSD.org>; Tue, 18 Feb 2014 06:13:50 +0000 (UTC)
Received: from mail.lockless.no (mail.lockless.no [46.29.221.38])
by mta04.bitpro.no (Postfix) with ESMTPS id 6D06910020C;
Tue, 18 Feb 2014 07:13:48 +0100 (CET)
Received: from localhost (localhost [127.0.0.1])
by mail.lockless.no (Postfix) with ESMTP id 14CF58F6730;
Tue, 18 Feb 2014 07:14:44 +0100 (CET)
X-Virus-Scanned: by amavisd-new-2.6.4 (20090625) (Debian) at lockless.no
Received: from mail.lockless.no ([127.0.0.1])
by localhost (mail.lockless.no [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id nbZZTWn0hTkC; Tue, 18 Feb 2014 07:14:42 +0100 (CET)
Received: from laptop015.home.selasky.org
(cm-176.74.213.204.customer.telag.net [176.74.213.204])
by mail.lockless.no (Postfix) with ESMTPSA id C40278F672F;
Tue, 18 Feb 2014 07:14:42 +0100 (CET)
Message-ID: <5302FA52.2010009@bitfrost.no>
Date: Tue, 18 Feb 2014 07:14:42 +0100
From: Hans Petter Selasky <hps@bitfrost.no>
Organization: Bitfrost A/S
User-Agent: Mozilla/5.0 (X11; FreeBSD amd64;
rv:24.0) Gecko/20100101 Thunderbird/24.1.0
MIME-Version: 1.0
To: Velcro Leaf <velcroleaf@rocketmail.com>,
"freebsd-usb@FreeBSD.org" <freebsd-usb@FreeBSD.org>
Subject: Re: consistent, functional 1TB usb drive?
References: <1392702874.11017.YahooMailNeo@web164504.mail.gq1.yahoo.com>
In-Reply-To: <1392702874.11017.YahooMailNeo@web164504.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Tue, 18 Feb 2014 06:13:51 -0000
On 02/18/14 06:54, Velcro Leaf wrote:
> I'm trying to get off tape drives and move to USB drives for backups, however circumstances are making this impossible.
>
> Does anyone have a suggestion for a known 1TB external USB drive, powered
> through the USB cable, that consistently works with FreeBSD, and has for some time?
>
> I've gone through half a dozen models of such drives and each time I find one that works properly on each of our servers, I try to buy a few more to make a complete cycle. Invariably, however, I can no longer purchase the same model, or I can get the same model, but it is invisibly different at purchase-time (eg, with new firmware that doesn't work with FreeBSD).
>
>
> I've tried to work through the quirks process with you guys, but it hasn't been successful, and eventually I suppose it's not considered enough of a problem to fix, probably because in a few weeks there will be a brand new version that doesn't work, in a different way.
>
> I know that these drives are all tested with Windows before shipping, and that's why they work with Windows, but is there any plan, on either the hardware or FreeBSD side of things to deal with this issue? I've been working on and off on the problem for about a year, and if anything, things are getting worse.
>
> -Leif
>
Hi,
Are any of the USB devices you have bought so-called "USB certified",
carry a USB logo and are registered by usb.org?
If yes, then you can complain about your findings of and force the
vendor to comply to the standards involving USB mass storage and SCSI.
If no, then you have to contact the vendor about the problems you find.
--HPS
From owner-freebsd-usb@FreeBSD.ORG Tue Feb 18 22:22:13 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 4D53B999
for <freebsd-usb@freebsd.org>; Tue, 18 Feb 2014 22:22:13 +0000 (UTC)
Received: from land.berklix.org (land.berklix.org [144.76.10.75])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id C63B41C37
for <freebsd-usb@freebsd.org>; Tue, 18 Feb 2014 22:22:12 +0000 (UTC)
Received: from park.js.berklix.net (p5DCBFAC1.dip0.t-ipconnect.de
[93.203.250.193]) (authenticated bits=128)
by land.berklix.org (8.14.5/8.14.5) with ESMTP id s1ILGATN024239;
Tue, 18 Feb 2014 21:16:10 GMT (envelope-from jhs@berklix.com)
Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41])
by park.js.berklix.net (8.14.3/8.14.3) with ESMTP id s1ILGt7X079617;
Tue, 18 Feb 2014 22:16:55 +0100 (CET) (envelope-from jhs@berklix.com)
Received: from fire.js.berklix.net (localhost [127.0.0.1])
by fire.js.berklix.net (8.14.5/8.14.5) with ESMTP id s1ILGHHm023974;
Tue, 18 Feb 2014 22:16:43 +0100 (CET) (envelope-from jhs@berklix.com)
Message-Id: <201402182116.s1ILGHHm023974@fire.js.berklix.net>
To: Hans Petter Selasky <hps@bitfrost.no>
Subject: Re: Reiner SCT RFID unknown device id?
From: "Julian H. Stacey" <jhs@berklix.com>
Organization: http://berklix.com BSD Unix Linux Consultants, Munich Germany
User-agent: EXMH on FreeBSD http://berklix.com/free/
X-URL: http://www.berklix.com
In-reply-to: Your message "Mon, 17 Feb 2014 21:12:32 +0100."
<53026D30.4040704@bitfrost.no>
Date: Tue, 18 Feb 2014 22:16:17 +0100
Cc: freebsd-usb@freebsd.org
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Tue, 18 Feb 2014 22:22:13 -0000
Hans Petter Selasky wrote:
> On 02/17/14 16:54, Mathias Picker wrote:
> > I just found a used Reiner SCT RFID
> > (http://www.reiner-sct.com/produkte/chipkartenleser/cyberJack_RFID_standard.html) and bought it, hoping I could get it to work in FreeBSD.
> >
> > When connecting I found this in the log:
> >
> > Feb 17 16:44:10 marcopolo kernel: ugen5.2: <REINER SCT> at usbus5
> > Feb 17 16:44:10 marcopolo devd: Executing 'logger Unknown USB device:
> > vendor 0x0c4b product 0x0500 bus uhub4'
> > Feb 17 16:44:10 marcopolo mathiasp: Unknown USB device: vendor 0x0c4b
> > product 0x0500 bus uhub4
> >
> > This 0x0c4b/0x0500 is actually the reiner sct, so why is this "unknown
> > USB device" shown? usbconfig shows it just fine:
> >
> > marcopolo# usbconfig -d 5.2
> > ugen5.2: <cyberJack RFID standard REINER SCT> at usbus5, cfg=0 md=HOST
> > spd=FULL (12Mbps) pwr=ON (192mA)
> >
> >
> > Also, has anyone tried to get this up and running on FreeBSD? pcscd with
> > libccid does not find it, and googling I only find information about
> > Reiner's proprietary linux driver...
> >
> > Thanks, Mathias
>
> Hi,
>
> Grep for "Unknown" in /etc/
>
> It is coming from devd.
>
> --HPS
A while back an issue of CT magazine in Germany had a simpler device
from Reiner shrunk wrapped on magazines as a sales incentive. Device was:
http://www.reiner-sct.com/produkte/chipkartenleser/cyberjack_RFID_basis.html
I've not tried beyond devd -d -D
match "vendor" "0x0c4b"
match "product" "0x9102"
match "devclass" "0x00"
match "devsubclass" "0x00"
# match "sernum" ""
match "release" "0x0001"
http://www.reiner-sct.com/produkte/software/owok/was_ist_owok.html
https://www.chipkartenleser-shop.de/shop/rsct/group/1444
https://www.chipkartenleser-shop.de/shop/rsct/article/4320
https://www.chipkartenleser-shop.de/images/uploads/article/info_file_de/654/RSCT_LIZENZVEREINBARUNG_OWOK_1_0.pdf
Legal licence in German only I skimmed inc.:
REINER SCT räumt dem NUTZER an der SOFTWARE ausschließlich
zum Zwecke der Nutzung in Verbindung mit anderen OWOK
-Produkten ...
Which I suppose might mean they dont want ot used with non OWOK
devices not from them. I did not download sources to view.
Pursue it if you fancy.
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultant, Munich http://berklix.com
Interleave replies below like a play script. Indent old text with "> ".
Send plain text, not quoted-printable, HTML, base64, or multipart/alternative.
From owner-freebsd-usb@FreeBSD.ORG Sat Feb 22 13:26:44 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 3AFA216F
for <freebsd-usb@freebsd.org>; Sat, 22 Feb 2014 13:26:44 +0000 (UTC)
Received: from mail.ebusiness-leidinger.de (mail.ebusiness-leidinger.de
[217.11.53.44]) by mx1.freebsd.org (Postfix) with ESMTP id E1373174C
for <freebsd-usb@freebsd.org>; Sat, 22 Feb 2014 13:26:43 +0000 (UTC)
Received: from outgoing.leidinger.net (p57A38893.dip0.t-ipconnect.de
[87.163.136.147])
by mail.ebusiness-leidinger.de (Postfix) with ESMTPSA id 0FA6B844009;
Sat, 22 Feb 2014 14:26:24 +0100 (CET)
Received: from unknown (Titan.Leidinger.net [192.168.1.17])
by outgoing.leidinger.net (Postfix) with ESMTP id DCC4D3D1F;
Sat, 22 Feb 2014 14:26:20 +0100 (CET)
DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=leidinger.net;
s=outgoing-alex; t=1393075581;
bh=4TZqQ6ZwpUyTLLQtpPP75U5gLCQS7uErEp6CB+HdC2k=;
h=Date:From:To:Cc:Subject:In-Reply-To:References;
b=mNRTPrjX/eK6vQZlQ1vi2PyZSiTumbmxG6HCNW4R/mCyllJMagPa4L55zShLqFDb6
PWZYvMbm3LslDmUZU21ikV20NLm9voLF9fttbPx53/7WFT8O96NJx733FiOVxK59jH
fdQjQ18u+Wa9FduftTo5fvko0WNFJxsv8Te+Blz0iYnHOwvPcTV8EqYpeH7H0TUNZR
2sxoSMglhfW5obHiEv2egE23YdFOqjQYUf/lRHxCb+gE1hAqUmlRPBjMZvWoH14gZM
c96bkWQ17V/ch0txXh3tiqUWOucOehD6mzH5sDlXfmuq4WvNFykcHXbtAY1qP9CExs
L56rUh0ZBpYEg==
Date: Sat, 22 Feb 2014 14:26:18 +0100
From: Alexander Leidinger <Alexander@Leidinger.net>
To: "Julian H. Stacey" <jhs@berklix.com>
Subject: Re: Reiner SCT RFID unknown device id?
Message-ID: <20140222142618.00006f9b@unknown>
In-Reply-To: <201402182116.s1ILGHHm023974@fire.js.berklix.net>
References: <53026D30.4040704@bitfrost.no>
<201402182116.s1ILGHHm023974@fire.js.berklix.net>
X-Mailer: Claws Mail 3.9.2-55-g74b05b (GTK+ 2.16.6; i586-pc-mingw32msvc)
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
X-EBL-MailScanner-Information: Please contact the ISP for more information
X-EBL-MailScanner-ID: 0FA6B844009.A502F
X-EBL-MailScanner: Found to be clean
X-EBL-MailScanner-SpamCheck: not spam, spamhaus-ZEN,
SpamAssassin (not cached, score=-1.135, required 6,
autolearn=disabled, ALL_TRUSTED -1.00, AWL -0.03, DKIM_SIGNED 0.10,
DKIM_VALID -0.10, DKIM_VALID_AU -0.10, RP_MATCHES_RCVD -0.00)
X-EBL-MailScanner-From: alexander@leidinger.net
X-EBL-MailScanner-Watermark: 1393680384.17312@hD4IHpM3ZAWHLE/tHByLgg
X-EBL-Spam-Status: No
Cc: freebsd-usb@freebsd.org
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Sat, 22 Feb 2014 13:26:44 -0000
On Tue, 18 Feb 2014 22:16:17 +0100
"Julian H. Stacey" <jhs@berklix.com> wrote:
> Hans Petter Selasky wrote:
> > On 02/17/14 16:54, Mathias Picker wrote:
> > > I just found a used Reiner SCT RFID
> > > (http://www.reiner-sct.com/produkte/chipkartenleser/cyberJack_RFID_standard.html)
> > > and bought it, hoping I could get it to work in FreeBSD.
A port at
http://www.leidinger.net/test/pcsc-cyberjack.tar.bz2
I did this port not for the RFID reader, it's for another one. It may
or may not work for you.
Bye,
Alexander.
--
http://www.Leidinger.net Alexander @ Leidinger.net: PGP ID = B0063FE7
http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID = 72077137
From owner-freebsd-usb@FreeBSD.ORG Sat Feb 22 18:28:48 2014
Return-Path: <owner-freebsd-usb@FreeBSD.ORG>
Delivered-To: freebsd-usb@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
[IPv6:2001:1900:2254:206a::19:1])
(using TLSv1 with cipher ADH-AES256-SHA (256/256 bits))
(No client certificate requested)
by hub.freebsd.org (Postfix) with ESMTPS id 5F53AB13
for <freebsd-usb@freebsd.org>; Sat, 22 Feb 2014 18:28:48 +0000 (UTC)
Received: from land.berklix.org (land.berklix.org [144.76.10.75])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by mx1.freebsd.org (Postfix) with ESMTPS id D980D10A1
for <freebsd-usb@freebsd.org>; Sat, 22 Feb 2014 18:28:47 +0000 (UTC)
Received: from park.js.berklix.net (p5DCBDD89.dip0.t-ipconnect.de
[93.203.221.137]) (authenticated bits=128)
by land.berklix.org (8.14.5/8.14.5) with ESMTP id s1MIRtis030292;
Sat, 22 Feb 2014 18:27:56 GMT (envelope-from jhs@berklix.com)
Received: from fire.js.berklix.net (fire.js.berklix.net [192.168.91.41])
by park.js.berklix.net (8.14.3/8.14.3) with ESMTP id s1MHnHGN002599;
Sat, 22 Feb 2014 18:49:18 +0100 (CET) (envelope-from jhs@berklix.com)
Received: from fire.js.berklix.net (localhost [127.0.0.1])
by fire.js.berklix.net (8.14.5/8.14.5) with ESMTP id s1MHmrZK021602;
Sat, 22 Feb 2014 18:49:05 +0100 (CET) (envelope-from jhs@berklix.com)
Message-Id: <201402221749.s1MHmrZK021602@fire.js.berklix.net>
To: Alexander Leidinger <Alexander@leidinger.net>
Subject: Re: Reiner SCT RFID unknown device id?
From: "Julian H. Stacey" <jhs@berklix.com>
Organization: http://berklix.com BSD Unix Linux Consultants, Munich Germany
User-agent: EXMH on FreeBSD http://berklix.com/free/
X-URL: http://www.berklix.com
In-reply-to: Your message "Sat, 22 Feb 2014 14:26:18 +0100."
<20140222142618.00006f9b@unknown>
Date: Sat, 22 Feb 2014 18:48:53 +0100
Cc: "Julian H. Stacey" <jhs@berklix.com>, freebsd-usb@freebsd.org
X-BeenThere: freebsd-usb@freebsd.org
X-Mailman-Version: 2.1.17
Precedence: list
List-Id: FreeBSD support for USB <freebsd-usb.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-usb/>
List-Post: <mailto:freebsd-usb@freebsd.org>
List-Help: <mailto:freebsd-usb-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-usb>,
<mailto:freebsd-usb-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Sat, 22 Feb 2014 18:28:48 -0000
Alexander Leidinger wrote:
> On Tue, 18 Feb 2014 22:16:17 +0100
> "Julian H. Stacey" <jhs@berklix.com> wrote:
>
> > Hans Petter Selasky wrote:
> > > On 02/17/14 16:54, Mathias Picker wrote:
> > > > I just found a used Reiner SCT RFID
> > > > (http://www.reiner-sct.com/produkte/chipkartenleser/cyberJack_RFID_standard.html)
> > > > and bought it, hoping I could get it to work in FreeBSD.
>
> A port at
> http://www.leidinger.net/test/pcsc-cyberjack.tar.bz2
>
> I did this port not for the RFID reader, it's for another one. It may
> or may not work for you.
Thanks Alexander !, I downloaded & installed on 9.2-RELEASE,
I reduced files/* long rooted names to eg
--- ifd/Makefile.in.orig 2013-01-19 23:47:28.016736517 +0100
+++ ifd/Makefile.in 2013-01-19 23:48:19.870759570 +0100
copies in
http://www.berklix.com/~jhs/src/bsd/fixes/freebsd/ports/gen/security/pcsc-cyberjack/
I ran make package-recursive to make sure any dependencies are in place,
& installed security/pcsc-tools
pcsc_scan
PC/SC device scanner
V 1.4.21 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.8.8
SCardEstablishContext: Service not available.
man pcscd
/etc/rc.conf:
pcscd_enable="YES" # for /usrlocal/etc/rc.d/pcscd
/usr/local/etc/rc.d/pcscd start
pcsc_scan
PC/SC device scanner
V 1.4.21 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.8.8
Using reader plug'n play mechanism
Scanning present readers...
Waiting for the first reader...
ls -l /usr/local/etc/reader.conf.d/reader.conf # nothing
cd /usr/local ; find . -name find . -name \*reader.conf\*
./man/man5/reader.conf.5.gz
man 5 reader.conf
"USB readers SHALL NOT be configured using this file"
cd /usr/local/lib/pcsc/drivers/libifd-cyberjack.bundle/Contents
find . -type f
./Info.plist
./PkgInfo
./FreeBSD/libifd-cyberjack.so.6
./FreeBSD/libifd-cyberjack.la
vi Info.plist
VendorID .. 0x0c4b same as mine
ProductID does not include my 0x9102
do a quick hack in 3 blocks to add it.
/usr/local/etc/rc.d/pcscd restart
pcsc_scan
Waiting for the first reader...^D
Got to stop for now. Am I on course please ?
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultant, Munich http://berklix.com
Interleave replies below like a play script. Indent old text with "> ".
Send plain text, not quoted-printable, HTML, base64, or multipart/alternative.