From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 07:59:04 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 475CF79E for ; Sun, 7 Jun 2015 07:59:04 +0000 (UTC) (envelope-from herbert@oslo.ath.cx) Received: from oslo.ath.cx (oslo.ath.cx [IPv6:2a01:4f8:200:42e4::1]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "oslo.ath.cx", Issuer "oslo.ath.cx" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 8FE481DB3 for ; Sun, 7 Jun 2015 07:59:03 +0000 (UTC) (envelope-from herbert@oslo.ath.cx) Received: by oslo.ath.cx (OpenSMTPD) with ESMTP id 3a67e37d; Sun, 7 Jun 2015 09:59:00 +0200 (CEST) Date: Sun, 7 Jun 2015 09:59:00 +0200 From: "Herbert J. Skuhra" To: Bernt Hansson Cc: freebsd-questions@freebsd.org Subject: Re: kernel panic! Message-ID: <20150607075900.GA4169@oslo.ath.cx> References: <55725BC4.4030301@bananmonarki.se> <5572C340.5030209@bananmonarki.se> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5572C340.5030209@bananmonarki.se> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 07:59:04 -0000 On Sat, Jun 06, 2015 at 11:54:08AM +0200, Bernt Hansson wrote: > On 2015-06-06 06:16, Pratik Singhal wrote: > > Can you please post the boot log and the full stack trace of the panic, > > without that information I don't think anybody will be able to help you. > > Here it is. > > http://www.usenet4all.se/kernel_panic/IMG_0754.JPG Your system was running fine before? What has changed? Your system has 16 GB RAM, but only ~8 GB is available? Why? Are you tuning some vm sysctls? Are you using ZFS? Have you tried a newer release (9.3 or 10.1)? stable/8 reaches EOL soon (June 30th). -- Herbert From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 08:51:34 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 610F2CC1 for ; Sun, 7 Jun 2015 08:51:34 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a50.g.dreamhost.com (sub5.mail.dreamhost.com [208.113.200.129]) by mx1.freebsd.org (Postfix) with ESMTP id 467D51AB8 for ; Sun, 7 Jun 2015 08:51:33 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a50.g.dreamhost.com (localhost [127.0.0.1]) by homiemail-a50.g.dreamhost.com (Postfix) with ESMTP id 09C782038 for ; Sun, 7 Jun 2015 01:51:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=ozzmosis.com; h=date:from :to:subject:message-id:mime-version:content-type; s= ozzmosis.com; bh=rRVZOtqyhhaV6OCoawhXWLPSSRI=; b=jEyDflyhbmWmkVc 4tQ8Tp4577DiLSQLhWmfSMr+Y6AaP67x5TtpemoUn3TX2/Hseu1zFFz87EVTBPsH nc+0n+KqEf1lW3YnNyFKmU4Ru1Qf/aHMKVrUwkw0Owa23P6FnvzNe9HYEBYKSOIP 8P3kS+8OYnFaqK3AE2pdbXY/hpUM= Received: from blizzard.ozzmosis.com (114-198-63-194.dyn.iinet.net.au [114.198.63.194]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: relay@ozzmosis.com) by homiemail-a50.g.dreamhost.com (Postfix) with ESMTPSA id BDC092037 for ; Sun, 7 Jun 2015 01:51:32 -0700 (PDT) Received: by blizzard.ozzmosis.com (Postfix, from userid 1001) id 643D6AFF; Sun, 7 Jun 2015 18:51:30 +1000 (AEST) Date: Sun, 7 Jun 2015 18:51:30 +1000 From: andrew clarke To: freebsd-questions@freebsd.org Subject: Custom locale to use ISO 8601 date format Message-ID: <20150607085130.GA77300@ozzmosis.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 08:51:34 -0000 Here in Australia the general population uses the British DD/MM/YY format for representing dates, eg. today is 07/06/15, and the en_AU.UTF-8 locale in FreeBSD 10.1 honours that: lrwxr-xr-x 1 root wheel 22 17 Feb 2011 /usr/share/locale/en_AU.UTF-8/LC_TIME -> ../en_GB.UTF-8/LC_TIME However I wanted programs to use the ISO 8601 YYYY-MM-DD date format (2015-06-07) instead. To do this in Linux, the general method seems to set LC_TIME=en_DK.utf8, but FreeBSD has no locale by that name. As root, I could modify /usr/share/locale/en_AU.UTF-8/LC_TIME, but that could be overwritten when I upgrade to 10.2 with freebsd-update. After reading locale(1) it turns out users can set PATH_LOCALE=$HOME/locale to use their own custom locales, so I copied /usr/share/locale/ to $HOME/locale/ then modified $HOME/locale/en_AU.UTF-8/LC_TIME: $ diff -u /usr/share/locale/en_AU.UTF-8/LC_TIME $HOME/locale/en_AU.UTF-8/LC_TIME --- /usr/share/locale/en_AU.UTF-8/LC_TIME 2011-02-17 13:19:18.000000000 +1100 +++ /home/ozzmosis/locale/en_AU.UTF-8/LC_TIME 2015-06-07 18:17:57.537156884 +1000 @@ -37,7 +37,7 @@ Friday Saturday %H:%M:%S -%d/%m/%Y +%Y-%m-%d %a %e %b %X %Y am pm Make sure LANG=en_AU.UTF-8 is set in your login, then logout and back in: $ locale LANG=en_AU.UTF-8 LC_CTYPE="en_AU.UTF-8" LC_COLLATE="en_AU.UTF-8" LC_TIME="en_AU.UTF-8" LC_NUMERIC="en_AU.UTF-8" LC_MONETARY="en_AU.UTF-8" LC_MESSAGES="en_AU.UTF-8" LC_ALL= $ date +"%x %X" 2015-06-07 18:42:59 Hopefully others find this useful. Regards Andrew From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 12:22:44 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 02EF37EF for ; Sun, 7 Jun 2015 12:22:44 +0000 (UTC) (envelope-from bah@bananmonarki.se) Received: from feeder.usenet4all.se (1-1-1-38a.far.sth.bostream.se [82.182.32.53]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 76A171AC3 for ; Sun, 7 Jun 2015 12:22:41 +0000 (UTC) (envelope-from bah@bananmonarki.se) Received: from [10.0.0.6] (netlaser-2 [10.0.0.6]) by feeder.usenet4all.se (8.13.1/8.13.1) with ESMTP id t57CMWNN082116; Sun, 7 Jun 2015 14:22:32 +0200 (CEST) (envelope-from bah@bananmonarki.se) Message-ID: <55743788.7010902@bananmonarki.se> Date: Sun, 07 Jun 2015 14:22:32 +0200 From: Bernt Hansson User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: "Herbert J. Skuhra" CC: freebsd-questions@freebsd.org Subject: Re: kernel panic! References: <55725BC4.4030301@bananmonarki.se> <5572C340.5030209@bananmonarki.se> <20150607075900.GA4169@oslo.ath.cx> In-Reply-To: <20150607075900.GA4169@oslo.ath.cx> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 12:22:44 -0000 On 2015-06-07 09:59, Herbert J. Skuhra wrote: > On Sat, Jun 06, 2015 at 11:54:08AM +0200, Bernt Hansson wrote: >> On 2015-06-06 06:16, Pratik Singhal wrote: >>> Can you please post the boot log and the full stack trace of the panic, >>> without that information I don't think anybody will be able to help you. >> >> Here it is. >> >> http://www.usenet4all.se/kernel_panic/IMG_0754.JPG > > Your system was running fine before? Yes. > What has changed? Loader.conf changed kern.maxfiles from 102400 to 10240000 > Your system has 16 GB RAM, but only ~8 GB is available? > Why? No idea. > Are you tuning some vm sysctls? Not that i know of. > Are you using ZFS? No. > Have you tried a newer release (9.3 or 10.1)? stable/8 reaches EOL soon > (June 30th). I have not tried any newer version on that machine, but we have 9.3-R too. From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 13:55:16 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 49C68B07 for ; Sun, 7 Jun 2015 13:55:16 +0000 (UTC) (envelope-from baho-utot@columbus.rr.com) Received: from cdptpa-oedge-vip.email.rr.com (cdptpa-outbound-snat.email.rr.com [107.14.166.228]) by mx1.freebsd.org (Postfix) with ESMTP id 0D7511F28 for ; Sun, 7 Jun 2015 13:55:14 +0000 (UTC) (envelope-from baho-utot@columbus.rr.com) Received: from [75.187.32.8] ([75.187.32.8:45859] helo=raspberrypi.bildanet.com) by cdptpa-oedge01 (envelope-from ) (ecelerity 3.5.0.35861 r(Momo-dev:tip)) with ESMTP id FD/68-29934-B3D44755; Sun, 07 Jun 2015 13:55:07 +0000 Received: from [192.168.1.53] (helo=baho-utot.bildanet.com) by raspberrypi.bildanet.com with esmtp (Exim 4.84) (envelope-from ) id 1Z1b2Z-0005Mi-8k for freebsd-questions@freebsd.org; Sun, 07 Jun 2015 09:55:07 -0400 Message-ID: <55744D39.9020409@columbus.rr.com> Date: Sun, 07 Jun 2015 09:55:05 -0400 From: Baho Utot User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Subject: jails X-RR-Connecting-IP: 107.14.168.118:25 X-Cloudmark-Score: 0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 13:55:16 -0000 I have FreeBSD 10.1 and trying to setup a jail according to the handbook: 15.3. Creating and Controlling Jails |#| *|setenv D/|/staorage/jails/crochet|/|* |#| *|mkdir -p $D|* |#| *|cd /usr/src|* |#| *|make buildworld|* |#| *|make installworld DESTDIR=$D|* |#| *|make distribution DESTDIR=$D|* |#| *|mount -t devfs devfs $D/dev|* cat /etc/jail.conf crochet { path = /storage/jails/crochet; mount.devfs; host.hostname = crochet; ip4.addr = 192.168.1.40; interface = re0; exec.start = "/bin/sh /etc/rc"; exec.stop = "/bin/sh /etc/rc.shutdown"; } jail /storage/jails/crochet crochet.bildanet.com 192.168.1.40 /bin/sh gives jail: Undefined variable. How does one manually start the jail? I would like to start the jail manually not automagically on boot I want to be "in the jail" when it starts to run crochet from there ie a command prompt. OK what did I do incorrectly? From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 14:51:08 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 86E3ABDA for ; Sun, 7 Jun 2015 14:51:08 +0000 (UTC) (envelope-from nanoman@nanoman.ca) Received: from mail.nanoman.ca (mail.nanoman.ca [76.10.173.222]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 2F9221BD9 for ; Sun, 7 Jun 2015 14:51:07 +0000 (UTC) (envelope-from nanoman@nanoman.ca) Received: from nanocomputer.nanoman.ca (nanocomputer.nanoman.ca [192.168.0.16]) by mail.nanoman.ca (Postfix) with ESMTP id D838011621; Sun, 7 Jun 2015 10:42:34 -0400 (EDT) Received: by nanocomputer.nanoman.ca (Postfix, from userid 62661) id 218B6172B2; Sun, 7 Jun 2015 10:42:32 -0400 (EDT) Date: Sun, 7 Jun 2015 10:42:32 -0400 From: "A.J. Kehoe IV (Nanoman)" To: andrew clarke Cc: freebsd-questions@freebsd.org Subject: Re: Custom locale to use ISO 8601 date format Message-ID: <20150607144231.GA61785@nanocomputer.nanoman.ca> Reply-To: nanoman@nanoman.ca References: <20150607085130.GA77300@ozzmosis.com> MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="17pEHd4RhPHOinZp" Content-Disposition: inline In-Reply-To: <20150607085130.GA77300@ozzmosis.com> Organization: Nanoman's Company User-Agent: Mutt (FreeBSD) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 14:51:08 -0000 --17pEHd4RhPHOinZp Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Disposition: inline Content-Transfer-Encoding: quoted-printable andrew clarke wrote: >Here in Australia the general population uses the British DD/MM/YY >format for representing dates, eg. today is 07/06/15, and the >en_AU.UTF-8 locale in FreeBSD 10.1 honours that: > >lrwxr-xr-x 1 root wheel 22 17 Feb 2011 /usr/share/locale/en_AU.UTF-8/L= C_TIME -> ../en_GB.UTF-8/LC_TIME > >However I wanted programs to use the ISO 8601 YYYY-MM-DD date format >(2015-06-07) instead. To do this in Linux, the general method seems to >set LC_TIME=3Den_DK.utf8, but FreeBSD has no locale by that name. [...] Thanks for sharing your patch, Andrew! Personally, I wish everybody would = adopt ISO 8601, or even ISO 2014, which was standardized twelve years earli= er in the year 1976. Canada uses ISO 8601, but this isn't reflected in FreeBSD's en_CA locale, s= o I submitted this patch: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D200079 After somebody commits this patch (or a patch that does something similar),= you could use en_CA instead of having to manually patch every system you m= aintain. --=20 A.J. Kehoe IV (Nanoman) | /"\ ASCII Ribbon Campaign Nanoman's Company | \ / - No HTML/RTF in E-mail E-mail: nanoman@nanoman.ca | X - No proprietary attachments WWW: http://www.nanoman.ca/ | / \ - Respect for open standards --17pEHd4RhPHOinZp Content-Type: application/x-pkcs7-signature Content-Disposition: attachment; filename="smime.p7s" Content-Transfer-Encoding: base64 MIIPUAYJKoZIhvcNAQcCoIIPQTCCDz0CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC DLwwggV3MIIDX6ADAgECAgMQOGIwDQYJKoZIhvcNAQENBQAweTEQMA4GA1UEChMHUm9vdCBD QTEeMBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0IFNp Z25pbmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2VydC5vcmcwHhcN MTUwMjEwMTc1MDI2WhcNMTUwODA5MTc1MDI2WjA9MRgwFgYDVQQDEw9DQWNlcnQgV29UIFVz ZXIxITAfBgkqhkiG9w0BCQEWEm5hbm9tYW5AbmFub21hbi5jYTCCASIwDQYJKoZIhvcNAQEB BQADggEPADCCAQoCggEBAK9WRGqRDUDjWwNIfZTBp4FL5bI0kY3ZqvM6tEO+Sqp5YxATre8F a+BYbeNp/8MKfuPrRgE2jRzlePAx7kpvZUhRTGAZpncmHC7Z3FDl8Ugid4193ReCfPypb9Gs 3ZgPfzJyNuDeCM3amz/cDXC/makJLpmLzu95D91hD+V30iActE5j1tNewMq9qJRoEdr5Tqus bUjjDm8kiK5sz9JzQjFoufuaWIR57w2Sm1gDVZ0MH46fxZ/SwLDDzt4VC2u+1oS4KSmVUm6X Wv1/Fmdf2sOOu9Ro2xVjJHW+j16lsFPPj+lkDv5tb0G7I2vBoKEQg/s+h8J4F+l/xPL3O5xB c68CAwEAAaOCAUIwggE+MAwGA1UdEwEB/wQCMAAwVgYJYIZIAYb4QgENBEkWR1RvIGdldCB5 b3VyIG93biBjZXJ0aWZpY2F0ZSBmb3IgRlJFRSBoZWFkIG92ZXIgdG8gaHR0cDovL3d3dy5D QWNlcnQub3JnMA4GA1UdDwEB/wQEAwIDqDBABgNVHSUEOTA3BggrBgEFBQcDBAYIKwYBBQUH AwIGCisGAQQBgjcKAwQGCisGAQQBgjcKAwMGCWCGSAGG+EIEATAyBggrBgEFBQcBAQQmMCQw IgYIKwYBBQUHMAGGFmh0dHA6Ly9vY3NwLmNhY2VydC5vcmcwMQYDVR0fBCowKDAmoCSgIoYg aHR0cDovL2NybC5jYWNlcnQub3JnL3Jldm9rZS5jcmwwHQYDVR0RBBYwFIESbmFub21hbkBu YW5vbWFuLmNhMA0GCSqGSIb3DQEBDQUAA4ICAQBOqFiruCiW6qhBBCVHqtiCvCtonycIYB1K cRCybPTCnGtpEDDWV5dVS0yo4cXMe383e+ZWslsa2PYgl7uoGv+1MkxBeaMeRUUYKrHBC8XP HX2otk9EQ/RvQ4q67V3w3ugnm0atU3C8H2gIvC+yXm+9PDJP5jArDmrtlVZgIsBKW9axdrXQ sYlr2j+obBDkkDfI5bABfAM+fYADN0ytA8TQZlFxYReDRWQmRiIavhIqS1lefG1VR31539/b 27P+qy70Ubxq3Gsc817P6aHHrZ0Fcp1blrPdh/lIoNLZXC58+Ns0vDZgxS9TtxnuQXcIokni qApBvwFQM4rk/C8mc1Jufns7ZzIJKIZmTYTFVYq0igrifLQ8lNwbeDOp0F0Dhm6UKMHxXfjR PDMseIBgMe5Ib81dFUtXnkfv2C3Opin6bZmTCiXdtA+0Ethr9EuEImjZqsq0iWfX63mlfM76 jyVJDtnQ5wsBBSn0wx6mqOVSqmiPbrRb2wHt3ndHfhZLG5WDBz98e/XcktPYs94wLiWhqOS4 6axqgV1EwJ90wV/HvhPXyFh1B5u+k5YyQ2Waz8RMTSDAFpNIlXBva1+deQ9k5aju0mo/6Qzx Ize0Q53gjUFqc55MVnatgvfcmoPjeox48iIqLBjvpITzeoYkJfJRkYjQQdMyCqHcv/D4gSDV oTCCBz0wggUloAMCAQICAQAwDQYJKoZIhvcNAQEEBQAweTEQMA4GA1UEChMHUm9vdCBDQTEe MBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0IFNpZ25p bmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2VydC5vcmcwHhcNMDMw MzMwMTIyOTQ5WhcNMzMwMzI5MTIyOTQ5WjB5MRAwDgYDVQQKEwdSb290IENBMR4wHAYDVQQL ExVodHRwOi8vd3d3LmNhY2VydC5vcmcxIjAgBgNVBAMTGUNBIENlcnQgU2lnbmluZyBBdXRo b3JpdHkxITAfBgkqhkiG9w0BCQEWEnN1cHBvcnRAY2FjZXJ0Lm9yZzCCAiIwDQYJKoZIhvcN AQEBBQADggIPADCCAgoCggIBAM4iwOJGfew2KAdQlvKgM0CMS/E7Zj8x5WsCNtvWfPbxiI9O dzYFQZX5CfASz0aGc2C3bn7owFhkrs2wrUUXDGP6Zwro1tK/PueYxPBM+uADuzVdbCHeniDZ us1mMjdy+vcI9cfNWMmO5w5e6j7+HKEUChVshoRbZGYqeqlLU3n1iKJ77i8KYSuNsn5NVqUT 7Orakp6sREEeWGBlBWb4wES9y5T3Qn4L92VomFEF8PMFkQQdGxeC7MhXu8NreojxsHLMJVsg kewWAhKPMukXGEjQxwUuAjBCuCWcBWs/qjqn61NI9+jStgeY3BvGNH9/yRyCegVYKwhb8zii qxddZsmY154Qi6LS3XSa93EMcmDfzW+YM52WNHY+JHqSsA6VHm/moEU4R6rXQe1KtxL21xuD ig8u2Am2WdeqBP/Sk31oLt2LS6tYui+N6pWnoMNUiaX724tRIp2yw74RviyRhouWeK0g04ov Gj/G0FFlhyGxGQFlf0Uch/V80EFMTymYIf0zH3UMBFH6GXfb1BQc7oHDHfWYt2kGkSLdAFDM gTGsEgd7ONpoW+Yr1H7JX63o63JM8wHlSyC/mqZXypEAAYuhdSE3tWMNZz5GT3AgZ87F1lnb AuDw0svNumK3kEHo3SDkKbxkKULIItx4mv9D7JgbCVFLWlrCcfHEy3Op5aELAgMBAAGjggHO MIIByjAdBgNVHQ4EFgQUFrUyG9TH8+DmjvO90rA67rI5GNEwgaMGA1UdIwSBmzCBmIAUFrUy G9TH8+DmjvO90rA67rI5GNGhfaR7MHkxEDAOBgNVBAoTB1Jvb3QgQ0ExHjAcBgNVBAsTFWh0 dHA6Ly93d3cuY2FjZXJ0Lm9yZzEiMCAGA1UEAxMZQ0EgQ2VydCBTaWduaW5nIEF1dGhvcml0 eTEhMB8GCSqGSIb3DQEJARYSc3VwcG9ydEBjYWNlcnQub3JnggEAMA8GA1UdEwEB/wQFMAMB Af8wMgYDVR0fBCswKTAnoCWgI4YhaHR0cHM6Ly93d3cuY2FjZXJ0Lm9yZy9yZXZva2UuY3Js MDAGCWCGSAGG+EIBBAQjFiFodHRwczovL3d3dy5jYWNlcnQub3JnL3Jldm9rZS5jcmwwNAYJ YIZIAYb4QgEIBCcWJWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZy9pbmRleC5waHA/aWQ9MTAwVgYJ YIZIAYb4QgENBEkWR1RvIGdldCB5b3VyIG93biBjZXJ0aWZpY2F0ZSBmb3IgRlJFRSBoZWFk IG92ZXIgdG8gaHR0cDovL3d3dy5jYWNlcnQub3JnMA0GCSqGSIb3DQEBBAUAA4ICAQAox+6c ggK6XIASyjUKHYFviWqZzPJoD3+n4Y1YlT698gbDkFqstWD2mUMBo4hwnJ1inaSHr2dYDTA2 O+atSNPLdAKGcT7iKwNo8TRiQEY7U+oo9Kz7ZpVTik1d/TvZYNfKeWk7sWWSpsaBglyczetN AYql3xFVqhXKHzfAgphwYdtqfJajji5UPk8hqZDv3IK/3OhFrU2Qcwg8lGWwBJl2f+K8wmoV qpcENyTYHpRObQ5RvtbEj8qWbfdD3+gwZSc7e7tDQ2PEQ/ey7GjM4RmOIvuY4XtaPgE3O4sI sKLzlU4ay5vNmrHbsnDwLUrb2LDjb0VIMxL//jwyKlT3xPeK8Igjwkf+ZHpxwNEepmOwB36k L9MBj9yfK7bGCKkPk0gl/BL9n0Lc88Q+9lew191p0QZ3NApL0sqg/xzGjMkWvsTMMjdoc18I +1H3SVM2BQqVAkzyeRoQ9tg6dZzzHfGiDXBnhhuzFvUv5aTreYb5PQvCcwulmaxv/Ge45S8L phgkjXvRSDUpGECsk2DhloZQtHpZ2I8hC5/PgpHGO79r3AeRuZdWI6q2bJTGSAY85M5OquT2 LwncU28u/HTrOmOZwqasibynskSgDYoQ42zyJMv6m59wRy7eFIvUsiAJlqJk8SQc3KE1nBWy 1LxVLn0G9ZwOVfRa1pPadq0lc0zFQzGCAlwwggJYAgEBMIGAMHkxEDAOBgNVBAoTB1Jvb3Qg Q0ExHjAcBgNVBAsTFWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZzEiMCAGA1UEAxMZQ0EgQ2VydCBT aWduaW5nIEF1dGhvcml0eTEhMB8GCSqGSIb3DQEJARYSc3VwcG9ydEBjYWNlcnQub3JnAgMQ OGIwCQYFKw4DAhoFAKCBsTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJ BTEPFw0xNTA2MDcxNDQyMzFaMCMGCSqGSIb3DQEJBDEWBBTZ10+sSqv3QArxtqFJQ52TW3Ch SjBSBgkqhkiG9w0BCQ8xRTBDMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggqhkiG 9w0DAgIBQDAHBgUrDgMCBzANBggqhkiG9w0DAgIBKDANBgkqhkiG9w0BAQEFAASCAQAMVAn6 qcrfXN112rXYaeHDlXJLvryVJTDQqQJlVTUM0JpRvhFZsbWJbA0uhkEacitubmD47yGhwjeW v9qsYQxWV9VHTCy8QUCyMq0UkHEH4p1aH07pCSd2pZEXjXYvGVMCwsgTuCox7Wqj1DKGT5My EMfYI9l8Pdro7l6jSw8QpvsnltQ9j1a6tRdOnqfrTpn3tHwScl+ntKFamWyBdmTMAFR8AanC HXVMpYLNNhg1YPrdflLih2cxsGH5hbUCZCyp+NEKQdH2KhV+O/woUl2RFGnzHGG08jvex82X wvJ2w6MmVGB/fbGo4HEs94vnhCPe9F9wa52EgKgU94GL5uUz --17pEHd4RhPHOinZp-- From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 15:31:35 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id DB8BCA7F for ; Sun, 7 Jun 2015 15:31:34 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a43.g.dreamhost.com (sub5.mail.dreamhost.com [208.113.200.129]) by mx1.freebsd.org (Postfix) with ESMTP id BF15A1695 for ; Sun, 7 Jun 2015 15:31:33 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a43.g.dreamhost.com (localhost [127.0.0.1]) by homiemail-a43.g.dreamhost.com (Postfix) with ESMTP id 436F08C05F; Sun, 7 Jun 2015 08:31:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=ozzmosis.com; h=date:from :to:cc:subject:message-id:references:mime-version:content-type: in-reply-to; s=ozzmosis.com; bh=1pRVT/DWXsOKR7KdlCLJhv8DBQs=; b= pZXf9S/wXknU9PMpTYt+6BYjbjRZJqwGVbMBUKtmdyE2UInad5rv9ekKPlE5tr1Y N+TovM0cgixTRDjoAv8Q6tgsBkdjvpee++yJLmQSGQUdE15PNIiW5/g8QpuDfFiN 3nX661gCqk1/fWUxmVFPfcDJEf+Z2VbIMpxCxlffOYk= Received: from blizzard.ozzmosis.com (114-198-63-194.dyn.iinet.net.au [114.198.63.194]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: relay@ozzmosis.com) by homiemail-a43.g.dreamhost.com (Postfix) with ESMTPSA id D70A08C057; Sun, 7 Jun 2015 08:31:32 -0700 (PDT) Received: by blizzard.ozzmosis.com (Postfix, from userid 1001) id 8ED09B65; Mon, 8 Jun 2015 01:31:30 +1000 (AEST) Date: Mon, 8 Jun 2015 01:31:30 +1000 From: andrew clarke To: "A.J. Kehoe IV (Nanoman)" Cc: freebsd-questions@freebsd.org Subject: Re: Custom locale to use ISO 8601 date format Message-ID: <20150607153130.GA80377@ozzmosis.com> References: <20150607085130.GA77300@ozzmosis.com> <20150607144231.GA61785@nanocomputer.nanoman.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20150607144231.GA61785@nanocomputer.nanoman.ca> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 15:31:35 -0000 On Sun 2015-06-07 10:42:32 UTC-0400, A.J. Kehoe IV (Nanoman) (nanoman@nanoman.ca) wrote: > >Here in Australia the general population uses the British DD/MM/YY > >format for representing dates, eg. today is 07/06/15, and the > >en_AU.UTF-8 locale in FreeBSD 10.1 honours that: > > > >lrwxr-xr-x 1 root wheel 22 17 Feb 2011 /usr/share/locale/en_AU.UTF-8/LC_TIME -> ../en_GB.UTF-8/LC_TIME > > > >However I wanted programs to use the ISO 8601 YYYY-MM-DD date format > >(2015-06-07) instead. To do this in Linux, the general method seems to > >set LC_TIME=en_DK.utf8, but FreeBSD has no locale by that name. > > [...] > > Thanks for sharing your patch, Andrew! Personally, I wish everybody > would adopt ISO 8601, or even ISO 2014, which was standardized twelve > years earlier in the year 1976. I'd like to see that too, I'm not holding my breath. Maybe after the US moves to metric... ;-) I'm not suggesting en_AU.*/LC_TIME be changed system-wide. The patch just works for me locally and I'm fine with that. > Canada uses ISO 8601, but this isn't reflected in FreeBSD's en_CA > locale, so I submitted this patch: > > https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200079 That's encouraging to hear. I think you'll need to provide a better source than Wikipedia though. Also, obviously what the standards association has adopted and what's actually used by the general public can be two different things. System locales should probably err on the side of what is already being used. Of course what is being used can also be dictated by the system locale, so it's a bit chicken-and-egg really. And all of this assumes the programs you use honour your chosen locale. Some apps blindly ignore it, and some have their own setting for the date/time format, with the pros and cons of doing that. > After somebody commits this patch (or a patch that does something > similar), you could use en_CA instead of having to manually patch > every system you maintain. I could, but I'll be doing the latter since it means I'll always have complete control over my locale. Plus I only maintain a couple of FreeBSD systems where locale really matters to me on a daily basis. A once-off rsync of $HOME/locale/ is no big deal. From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 15:38:36 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id CDE84D18 for ; Sun, 7 Jun 2015 15:38:36 +0000 (UTC) (envelope-from che@bein.link) Received: from mail.bein.link (bein.link [37.252.124.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 941C31723 for ; Sun, 7 Jun 2015 15:38:36 +0000 (UTC) (envelope-from che@bein.link) Received: from thinkpad.localnet (home.bein.link [172.16.32.6]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.bein.link (Postfix) with ESMTPSA id C70FB1AF18F; Sun, 7 Jun 2015 15:38:25 +0000 (UTC) From: Maxim V Filimonov To: freebsd-questions@freebsd.org Reply-To: che@bein.link Cc: Baho Utot Subject: Re: jails Date: Sun, 07 Jun 2015 18:38:24 +0300 Message-ID: <1642628.bHssLBXWQh@thinkpad> User-Agent: KMail/4.14.3 (FreeBSD/10.1-RELEASE-p10; KDE/4.14.3; amd64; ; ) In-Reply-To: <55744D39.9020409@columbus.rr.com> References: <55744D39.9020409@columbus.rr.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 15:38:36 -0000 On Sunday 07 June 2015 09:55:05 Baho Utot wrote: > I have FreeBSD 10.1 and trying to setup a jail according to the handbook: > > > 15.3. Creating and Controlling Jails > > |#| *|setenv D/|/staorage/jails/crochet|/|* > |#| *|mkdir -p $D|* > |#| *|cd /usr/src|* > |#| *|make buildworld|* > |#| *|make installworld DESTDIR=$D|* > |#| *|make distribution DESTDIR=$D|* > |#| *|mount -t devfs devfs $D/dev|* > > cat /etc/jail.conf > crochet { > path = /storage/jails/crochet; > mount.devfs; > host.hostname = crochet; > ip4.addr = 192.168.1.40; > interface = re0; > exec.start = "/bin/sh /etc/rc"; > exec.stop = "/bin/sh /etc/rc.shutdown"; > } > > > jail /storage/jails/crochet crochet.bildanet.com 192.168.1.40 /bin/sh > > gives jail: Undefined variable. > > How does one manually start the jail? > > I would like to start the jail manually not automagically on boot > > I want to be "in the jail" when it starts to run crochet from there ie a > command prompt. > > OK what did I do incorrectly? > To start a jail, type > jail -c crochet To be inside this jail (i.e. to start a shell inside it), type: > jexec crochet /bin/sh -- wbr, Maxim Filimonov From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 16:29:17 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 49D09DCF for ; Sun, 7 Jun 2015 16:29:17 +0000 (UTC) (envelope-from nanoman@nanoman.ca) Received: from mail.nanoman.ca (mail.nanoman.ca [76.10.173.222]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E44C112FF for ; Sun, 7 Jun 2015 16:29:16 +0000 (UTC) (envelope-from nanoman@nanoman.ca) Received: from nanocomputer.nanoman.ca (nanocomputer.nanoman.ca [192.168.0.16]) by mail.nanoman.ca (Postfix) with ESMTP id 084EB11626; Sun, 7 Jun 2015 12:29:15 -0400 (EDT) Received: by nanocomputer.nanoman.ca (Postfix, from userid 62661) id D31CC172B2; Sun, 7 Jun 2015 12:29:11 -0400 (EDT) Date: Sun, 7 Jun 2015 12:29:11 -0400 From: "A.J. Kehoe IV (Nanoman)" To: andrew clarke Cc: freebsd-questions@freebsd.org Subject: Re: Custom locale to use ISO 8601 date format Message-ID: <20150607162911.GB61785@nanocomputer.nanoman.ca> Reply-To: nanoman@nanoman.ca References: <20150607085130.GA77300@ozzmosis.com> <20150607144231.GA61785@nanocomputer.nanoman.ca> <20150607153130.GA80377@ozzmosis.com> MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="K8nIJk4ghYZn606h" Content-Disposition: inline In-Reply-To: <20150607153130.GA80377@ozzmosis.com> Organization: Nanoman's Company User-Agent: Mutt (FreeBSD) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 16:29:17 -0000 --K8nIJk4ghYZn606h Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Disposition: inline Content-Transfer-Encoding: quoted-printable andrew clarke wrote: >On Sun 2015-06-07 10:42:32 UTC-0400, A.J. Kehoe IV (Nanoman) (nanoman@nano= man.ca) wrote: > >> >Here in Australia the general population uses the British DD/MM/YY >> >format for representing dates, eg. today is 07/06/15, and the >> >en_AU.UTF-8 locale in FreeBSD 10.1 honours that: >> > >> >lrwxr-xr-x 1 root wheel 22 17 Feb 2011 /usr/share/locale/en_AU.UTF-= 8/LC_TIME -> ../en_GB.UTF-8/LC_TIME >> > >> >However I wanted programs to use the ISO 8601 YYYY-MM-DD date format >> >(2015-06-07) instead. To do this in Linux, the general method seems to >> >set LC_TIME=3Den_DK.utf8, but FreeBSD has no locale by that name. >> >> [...] >> >> Thanks for sharing your patch, Andrew! Personally, I wish everybody >> would adopt ISO 8601, or even ISO 2014, which was standardized twelve >> years earlier in the year 1976. > >I'd like to see that too, I'm not holding my breath. Maybe after the US >moves to metric... ;-) But then visitors to the United States would feel less like they're visitin= g a foreign country! And the imperial to metric conversion app on my mobil= e telephone would become less useful. >I'm not suggesting en_AU.*/LC_TIME be changed system-wide. The patch >just works for me locally and I'm fine with that. My understanding is that the Australian government hasn't adopted ISO 8601,= so I wouldn't suggest this either. >> Canada uses ISO 8601, but this isn't reflected in FreeBSD's en_CA >> locale, so I submitted this patch: >> >> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D200079 > >That's encouraging to hear. I think you'll need to provide a >better source than Wikipedia though. You're right. Canada's official time is defined by National Research Counc= il Canada. They recommend ISO 8601: http://www.nrc-cnrc.gc.ca/eng/services/time/index.html http://www.nrc-cnrc.gc.ca/eng/services/time/faq/#Q8 >Also, obviously what the standards association has adopted and what's >actually used by the general public can be two different things. >System locales should probably err on the side of what is already >being used. Of course what is being used can also be dictated by the >system locale, so it's a bit chicken-and-egg really. > >And all of this assumes the programs you use honour your chosen >locale. Some apps blindly ignore it, and some have their own setting >for the date/time format, with the pros and cons of doing that. I agree. Here's an example that may never be adopted: http://www.ietf.org/rfc/rfc2550.txt >> After somebody commits this patch (or a patch that does something >> similar), you could use en_CA instead of having to manually patch >> every system you maintain. > >I could, but I'll be doing the latter since it means I'll always have >complete control over my locale. Plus I only maintain a couple of FreeBSD >systems where locale really matters to me on a daily basis. A once-off >rsync of $HOME/locale/ is no big deal. Still, it would be nice to be able to change only LC_TIME if you're in a co= untry that doesn't use ISO 8601. Fortunately for me, all the systems I'm r= esponsible for are in Canada, so I wouldn't have to do anything other than = get this patch committed. --=20 A.J. Kehoe IV (Nanoman) | /"\ ASCII Ribbon Campaign Nanoman's Company | \ / - No HTML/RTF in E-mail E-mail: nanoman@nanoman.ca | X - No proprietary attachments WWW: http://www.nanoman.ca/ | / \ - Respect for open standards --K8nIJk4ghYZn606h Content-Type: application/x-pkcs7-signature Content-Disposition: attachment; filename="smime.p7s" Content-Transfer-Encoding: base64 MIIPUAYJKoZIhvcNAQcCoIIPQTCCDz0CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC DLwwggV3MIIDX6ADAgECAgMQOGIwDQYJKoZIhvcNAQENBQAweTEQMA4GA1UEChMHUm9vdCBD QTEeMBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0IFNp Z25pbmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2VydC5vcmcwHhcN MTUwMjEwMTc1MDI2WhcNMTUwODA5MTc1MDI2WjA9MRgwFgYDVQQDEw9DQWNlcnQgV29UIFVz ZXIxITAfBgkqhkiG9w0BCQEWEm5hbm9tYW5AbmFub21hbi5jYTCCASIwDQYJKoZIhvcNAQEB BQADggEPADCCAQoCggEBAK9WRGqRDUDjWwNIfZTBp4FL5bI0kY3ZqvM6tEO+Sqp5YxATre8F a+BYbeNp/8MKfuPrRgE2jRzlePAx7kpvZUhRTGAZpncmHC7Z3FDl8Ugid4193ReCfPypb9Gs 3ZgPfzJyNuDeCM3amz/cDXC/makJLpmLzu95D91hD+V30iActE5j1tNewMq9qJRoEdr5Tqus bUjjDm8kiK5sz9JzQjFoufuaWIR57w2Sm1gDVZ0MH46fxZ/SwLDDzt4VC2u+1oS4KSmVUm6X Wv1/Fmdf2sOOu9Ro2xVjJHW+j16lsFPPj+lkDv5tb0G7I2vBoKEQg/s+h8J4F+l/xPL3O5xB c68CAwEAAaOCAUIwggE+MAwGA1UdEwEB/wQCMAAwVgYJYIZIAYb4QgENBEkWR1RvIGdldCB5 b3VyIG93biBjZXJ0aWZpY2F0ZSBmb3IgRlJFRSBoZWFkIG92ZXIgdG8gaHR0cDovL3d3dy5D QWNlcnQub3JnMA4GA1UdDwEB/wQEAwIDqDBABgNVHSUEOTA3BggrBgEFBQcDBAYIKwYBBQUH AwIGCisGAQQBgjcKAwQGCisGAQQBgjcKAwMGCWCGSAGG+EIEATAyBggrBgEFBQcBAQQmMCQw IgYIKwYBBQUHMAGGFmh0dHA6Ly9vY3NwLmNhY2VydC5vcmcwMQYDVR0fBCowKDAmoCSgIoYg aHR0cDovL2NybC5jYWNlcnQub3JnL3Jldm9rZS5jcmwwHQYDVR0RBBYwFIESbmFub21hbkBu YW5vbWFuLmNhMA0GCSqGSIb3DQEBDQUAA4ICAQBOqFiruCiW6qhBBCVHqtiCvCtonycIYB1K cRCybPTCnGtpEDDWV5dVS0yo4cXMe383e+ZWslsa2PYgl7uoGv+1MkxBeaMeRUUYKrHBC8XP HX2otk9EQ/RvQ4q67V3w3ugnm0atU3C8H2gIvC+yXm+9PDJP5jArDmrtlVZgIsBKW9axdrXQ sYlr2j+obBDkkDfI5bABfAM+fYADN0ytA8TQZlFxYReDRWQmRiIavhIqS1lefG1VR31539/b 27P+qy70Ubxq3Gsc817P6aHHrZ0Fcp1blrPdh/lIoNLZXC58+Ns0vDZgxS9TtxnuQXcIokni qApBvwFQM4rk/C8mc1Jufns7ZzIJKIZmTYTFVYq0igrifLQ8lNwbeDOp0F0Dhm6UKMHxXfjR PDMseIBgMe5Ib81dFUtXnkfv2C3Opin6bZmTCiXdtA+0Ethr9EuEImjZqsq0iWfX63mlfM76 jyVJDtnQ5wsBBSn0wx6mqOVSqmiPbrRb2wHt3ndHfhZLG5WDBz98e/XcktPYs94wLiWhqOS4 6axqgV1EwJ90wV/HvhPXyFh1B5u+k5YyQ2Waz8RMTSDAFpNIlXBva1+deQ9k5aju0mo/6Qzx Ize0Q53gjUFqc55MVnatgvfcmoPjeox48iIqLBjvpITzeoYkJfJRkYjQQdMyCqHcv/D4gSDV oTCCBz0wggUloAMCAQICAQAwDQYJKoZIhvcNAQEEBQAweTEQMA4GA1UEChMHUm9vdCBDQTEe MBwGA1UECxMVaHR0cDovL3d3dy5jYWNlcnQub3JnMSIwIAYDVQQDExlDQSBDZXJ0IFNpZ25p bmcgQXV0aG9yaXR5MSEwHwYJKoZIhvcNAQkBFhJzdXBwb3J0QGNhY2VydC5vcmcwHhcNMDMw MzMwMTIyOTQ5WhcNMzMwMzI5MTIyOTQ5WjB5MRAwDgYDVQQKEwdSb290IENBMR4wHAYDVQQL ExVodHRwOi8vd3d3LmNhY2VydC5vcmcxIjAgBgNVBAMTGUNBIENlcnQgU2lnbmluZyBBdXRo b3JpdHkxITAfBgkqhkiG9w0BCQEWEnN1cHBvcnRAY2FjZXJ0Lm9yZzCCAiIwDQYJKoZIhvcN AQEBBQADggIPADCCAgoCggIBAM4iwOJGfew2KAdQlvKgM0CMS/E7Zj8x5WsCNtvWfPbxiI9O dzYFQZX5CfASz0aGc2C3bn7owFhkrs2wrUUXDGP6Zwro1tK/PueYxPBM+uADuzVdbCHeniDZ us1mMjdy+vcI9cfNWMmO5w5e6j7+HKEUChVshoRbZGYqeqlLU3n1iKJ77i8KYSuNsn5NVqUT 7Orakp6sREEeWGBlBWb4wES9y5T3Qn4L92VomFEF8PMFkQQdGxeC7MhXu8NreojxsHLMJVsg kewWAhKPMukXGEjQxwUuAjBCuCWcBWs/qjqn61NI9+jStgeY3BvGNH9/yRyCegVYKwhb8zii qxddZsmY154Qi6LS3XSa93EMcmDfzW+YM52WNHY+JHqSsA6VHm/moEU4R6rXQe1KtxL21xuD ig8u2Am2WdeqBP/Sk31oLt2LS6tYui+N6pWnoMNUiaX724tRIp2yw74RviyRhouWeK0g04ov Gj/G0FFlhyGxGQFlf0Uch/V80EFMTymYIf0zH3UMBFH6GXfb1BQc7oHDHfWYt2kGkSLdAFDM gTGsEgd7ONpoW+Yr1H7JX63o63JM8wHlSyC/mqZXypEAAYuhdSE3tWMNZz5GT3AgZ87F1lnb AuDw0svNumK3kEHo3SDkKbxkKULIItx4mv9D7JgbCVFLWlrCcfHEy3Op5aELAgMBAAGjggHO MIIByjAdBgNVHQ4EFgQUFrUyG9TH8+DmjvO90rA67rI5GNEwgaMGA1UdIwSBmzCBmIAUFrUy G9TH8+DmjvO90rA67rI5GNGhfaR7MHkxEDAOBgNVBAoTB1Jvb3QgQ0ExHjAcBgNVBAsTFWh0 dHA6Ly93d3cuY2FjZXJ0Lm9yZzEiMCAGA1UEAxMZQ0EgQ2VydCBTaWduaW5nIEF1dGhvcml0 eTEhMB8GCSqGSIb3DQEJARYSc3VwcG9ydEBjYWNlcnQub3JnggEAMA8GA1UdEwEB/wQFMAMB Af8wMgYDVR0fBCswKTAnoCWgI4YhaHR0cHM6Ly93d3cuY2FjZXJ0Lm9yZy9yZXZva2UuY3Js MDAGCWCGSAGG+EIBBAQjFiFodHRwczovL3d3dy5jYWNlcnQub3JnL3Jldm9rZS5jcmwwNAYJ YIZIAYb4QgEIBCcWJWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZy9pbmRleC5waHA/aWQ9MTAwVgYJ YIZIAYb4QgENBEkWR1RvIGdldCB5b3VyIG93biBjZXJ0aWZpY2F0ZSBmb3IgRlJFRSBoZWFk IG92ZXIgdG8gaHR0cDovL3d3dy5jYWNlcnQub3JnMA0GCSqGSIb3DQEBBAUAA4ICAQAox+6c ggK6XIASyjUKHYFviWqZzPJoD3+n4Y1YlT698gbDkFqstWD2mUMBo4hwnJ1inaSHr2dYDTA2 O+atSNPLdAKGcT7iKwNo8TRiQEY7U+oo9Kz7ZpVTik1d/TvZYNfKeWk7sWWSpsaBglyczetN AYql3xFVqhXKHzfAgphwYdtqfJajji5UPk8hqZDv3IK/3OhFrU2Qcwg8lGWwBJl2f+K8wmoV qpcENyTYHpRObQ5RvtbEj8qWbfdD3+gwZSc7e7tDQ2PEQ/ey7GjM4RmOIvuY4XtaPgE3O4sI sKLzlU4ay5vNmrHbsnDwLUrb2LDjb0VIMxL//jwyKlT3xPeK8Igjwkf+ZHpxwNEepmOwB36k L9MBj9yfK7bGCKkPk0gl/BL9n0Lc88Q+9lew191p0QZ3NApL0sqg/xzGjMkWvsTMMjdoc18I +1H3SVM2BQqVAkzyeRoQ9tg6dZzzHfGiDXBnhhuzFvUv5aTreYb5PQvCcwulmaxv/Ge45S8L phgkjXvRSDUpGECsk2DhloZQtHpZ2I8hC5/PgpHGO79r3AeRuZdWI6q2bJTGSAY85M5OquT2 LwncU28u/HTrOmOZwqasibynskSgDYoQ42zyJMv6m59wRy7eFIvUsiAJlqJk8SQc3KE1nBWy 1LxVLn0G9ZwOVfRa1pPadq0lc0zFQzGCAlwwggJYAgEBMIGAMHkxEDAOBgNVBAoTB1Jvb3Qg Q0ExHjAcBgNVBAsTFWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZzEiMCAGA1UEAxMZQ0EgQ2VydCBT aWduaW5nIEF1dGhvcml0eTEhMB8GCSqGSIb3DQEJARYSc3VwcG9ydEBjYWNlcnQub3JnAgMQ OGIwCQYFKw4DAhoFAKCBsTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJ BTEPFw0xNTA2MDcxNjI5MTFaMCMGCSqGSIb3DQEJBDEWBBTiER/zT2xmjMRMOaEfMPQ2/XVW ZjBSBgkqhkiG9w0BCQ8xRTBDMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggqhkiG 9w0DAgIBQDAHBgUrDgMCBzANBggqhkiG9w0DAgIBKDANBgkqhkiG9w0BAQEFAASCAQBB85G0 aX9svIEtunI2mRwGUw9W2ZOHqui5ybLCxHy02h9353MragImKb3Eux3fy2vLvP0sHe6NZvFZ ZwVXy7sHT7C+GCmg02t88EKrPDeRmQaL9kIpGmcS5xlVcQlJVNhn7NmLrinGZi6DKEz8ES+h 80nRq9puWrqwK5DtuMshM6iVwGVdt2RyN3FSOz/VLYtIxstryznpjrc2d/EOz36MTSSsaW5V l4VYcaFW9NQ3w+6vY1a3kN56yc/vsIfBQf+FzucXYHxy/jlkdWdYkx6GLHev5y48C955wf7p QGT8K1Mgn3b95SuHr0ReubiVFsDtGmrFyv/1D2sM8OcsS6gt --K8nIJk4ghYZn606h-- From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 22:29:12 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id CF34F2F8 for ; Sun, 7 Jun 2015 22:29:12 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from mout.gmx.net (mout.gmx.net [212.227.15.18]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "mout.gmx.net", Issuer "TeleSec ServerPass DE-1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4D76017C4 for ; Sun, 7 Jun 2015 22:29:12 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from desk8.phess.net ([95.88.11.237]) by mail.gmx.com (mrgmx001) with ESMTPSA (Nemesis) id 0MD9q8-1YpgMl2zUK-00GbK8 for ; Mon, 08 Jun 2015 00:29:03 +0200 From: Patrick Hess To: freebsd-questions@freebsd.org Subject: Re: Bridge(4) not learning Date: Mon, 08 Jun 2015 00:29:02 +0200 Message-ID: <15304556.VzR42eXemu@desk8.phess.net> User-Agent: KMail/4.14.2 (FreeBSD/10.1-RELEASE; KDE/4.14.2; i386; ; ) In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-Provags-ID: V03:K0:FrlMbFVtmPzLbcC3BMHKIF5G6hmy3c/ulZmXrpCKtG9H0Wixjl6 BXgw9GsVzlUmWhlagYCfqWi/rzjvsSnsib8ww8JFAdF9KOXmP+qTlMnhRhqwlogrKwMLp8T BNwWmQpq8ReYyp1lWN+ad6SIJfbSfCbklMggBZ1cp9AD3XscDMIEgiONOijbNPsuGRQ/+Qv 693VJwTf2oe0P3shY+8Kw== X-UI-Out-Filterresults: notjunk:1; X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 22:29:12 -0000 Andreas Wrede via freebsd-questions wrote: > igb1 is the interface to the local LAN with 192.168.0.1 as the servers > IP address Not sure if that's actually related to your issue, but according to the handbook, the IP address should be set on the bridge, not the physical interface. Patrick From owner-freebsd-questions@FreeBSD.ORG Sun Jun 7 22:41:52 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id EACE174A for ; Sun, 7 Jun 2015 22:41:52 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from mout.gmx.net (mout.gmx.net [212.227.15.19]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "mout.gmx.net", Issuer "TeleSec ServerPass DE-1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 7C7161BE2 for ; Sun, 7 Jun 2015 22:41:52 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from desk8.phess.net ([95.88.11.237]) by mail.gmx.com (mrgmx001) with ESMTPSA (Nemesis) id 0LcSAg-1ZRTp81f0A-00jrFZ for ; Mon, 08 Jun 2015 00:41:44 +0200 From: Patrick Hess To: freebsd-questions@freebsd.org Subject: Re: jails Date: Mon, 08 Jun 2015 00:41:43 +0200 Message-ID: <7628381.tKhpq5T4ue@desk8.phess.net> User-Agent: KMail/4.14.2 (FreeBSD/10.1-RELEASE; KDE/4.14.2; i386; ; ) In-Reply-To: <55744D39.9020409@columbus.rr.com> References: <55744D39.9020409@columbus.rr.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-Provags-ID: V03:K0:guO2fUjm+Ekxe7o+HWBE7NOaYKSKn0RnL0VG0DaDrE3q34dKmGY 6g3091IEEhW6vaAYcJl9wL4EMUKbStAUSOhct3aCpcoDjzuvsnTNarhXLVw32zv+jVf4Ujm spdnCRy7kEDTW3IgWs+9bazzpEA+EJcP5TcjNlaqjEjIiUXo8kPy99t6LAIzRK7YZNH/Aln pc3YoJNTW4pjQBUhvTK5g== X-UI-Out-Filterresults: notjunk:1;V01:K0:VrLp909SVgY=:Xd6J/cawHSyUbD2nAtUTP0 UfoQxNgDl3QAoMsTw+FDFGbMBkcyn4nzESQz+iIUJ23GsAXKuT9vAhNu3MdE915CTz6o7CPU9 BZlk10L7VNDE4MD/sT6e6SshUnREN8CWAxBtlK0I4UZKM5GGcJN1ZqxOAC3qn9VG7QE5j5Cig 2lAGWXr7p/YlyalBM1sckitH+AGS+K4YReMD5dKPpL/UESj7GD942DzYGY27EYuoSdv4CT9nK OYcgKUgtjUOo/dRyEU1UT+3w9ChNE2YNk2Do43RcShGBFuCoSF/bfESZ6bgEU3n2HLA7ctKOc kNMqBUGl1R5+sNuxFtXuXWzjq/tC4hx/YbPfx7ede7AnOkRvrwExhtd5Tw4/o/k5K9smSFXXS UdMTZl8t/uGwf0e5gdNvG7iL9HxTYohltLZFejvvLkaah5PsPqIz8MXw0ZuDDy2Zd/KrrmQ1w IfYuvuNaD/NIu9m+KcfpRGplRQCRJsc4EmSJs3BcnJOkLOmXt3EOobfMV6ryCAkQrshIQVZsG 6wZiY70xdke8LTnvQ2ZEFkRSEWZ1fPRDannsxSNcYhVdhDkzmjs2OQebmsZLSPmGMhJQf5R3j 2J666g8s9DM3hrNdq27KUr86BH1EteK//iOkaFQu7Qsg4vXMrcgq0hhtH5UnEV+s/NfSs+y+4 blOpndRsaTT7j/7kvVzJcvg/m+CMsoJ9XH32nmk2PpD28ENEwXSAgC6jexDH9h7zrt0U= X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 07 Jun 2015 22:41:53 -0000 Baho Utot wrote: > I would like to start the jail manually not automagically on boot Unless you haven't edited your /etc/rc.conf to do so, jails won't be started automatically at boot time. Patrick From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 12:48:25 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id E566B9A for ; Mon, 8 Jun 2015 12:48:24 +0000 (UTC) (envelope-from andreas@wrede.ca) Received: from mail.wapanafa.org (unknown [IPv6:2001:4dd0:ff00:91b4::10]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7EAAD1453 for ; Mon, 8 Jun 2015 12:48:24 +0000 (UTC) (envelope-from andreas@wrede.ca) Received: from wapaserver (localhost [127.0.0.1]) by mail.wapanafa.org (Postfix) with ESMTP id 584764D28E1; Mon, 8 Jun 2015 14:48:17 +0200 (CEST) X-Virus-Scanned: amavisd-new at wapanafa.org Received: from mail.wapanafa.org ([127.0.0.1]) by wapaserver (mail.wapanafa.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id NawfVsT0RbPC; Mon, 8 Jun 2015 14:48:16 +0200 (CEST) Received: from node-77b1pkn5l7mmjwcc0rv.ipv6.teksavvy.com (unknown [IPv6:2607:f2c0:f00e:f400:39b5:ecb3:4fa:4aeb]) by mail.wapanafa.org (Postfix) with ESMTPSA id 75DDC4D28A8; Mon, 8 Jun 2015 14:48:16 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=wrede.ca; s=S201404; t=1433767696; bh=8lPr0O6qH+fS7Wafgp56xMYfDFxF/zKnnUKa7a02cxo=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=uHu/N6UeZ0UrC6Kq+/vl8viRqmsWV5At0DCGcPomiuWXqArBwZPltfOSWtD7FvUN5 LVIuzHAxvooiyf3LCAcStktR5WOrPbRoJ5fz57+9CA2TZfHFsPJ3j0Mt7uomgMubOR cwNF14tNY9Lq9neU83UXZq3FXlIb++9e/c9xRt9w= Subject: Re: Bridge(4) not learning Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2098\)) Content-Type: multipart/signed; boundary="Apple-Mail=_A70DC928-1D3B-4609-A549-4CF0A7EA0595"; protocol="application/pgp-signature"; micalg=pgp-sha256 X-Pgp-Agent: GPGMail 2.5b6 From: Andreas Wrede In-Reply-To: <15304556.VzR42eXemu@desk8.phess.net> Date: Mon, 8 Jun 2015 08:48:14 -0400 Cc: Patrick Hess Message-Id: References: <15304556.VzR42eXemu@desk8.phess.net> To: freebsd-questions@freebsd.org X-Mailer: Apple Mail (2.2098) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 12:48:25 -0000 --Apple-Mail=_A70DC928-1D3B-4609-A549-4CF0A7EA0595 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii > On Jun 7, 2015, at 18:29 , Patrick Hess wrote: >=20 > Andreas Wrede via freebsd-questions wrote: >> igb1 is the interface to the local LAN with 192.168.0.1 as the = servers >> IP address >=20 > Not sure if that's actually related to your issue, but according to > the handbook, the IP address should be set on the bridge, not the > physical interface. I am not sure either but the working setup also has the IP address on = the physical interface. As a test, I created a bridge and added the igb0(4) interface (which = connects to the pppoe modem). The mac addresses from that LAN (i.e. the = modem's and a second server's) are learned by the bridge! So the bridge = learns addresses from igb0 but not from igb1! The igb0/1 are two ports = on an Intel 82576: igb0: port = 0xdc00-0xdc1f mem = 0xdf6e0000-0xdf6fffff,0xdf6c0000-0xdf6dffff,0xdf69c000-0xdf69ffff irq 16 = at device 0.0 on pci6 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: c8:0a:a9:c8:7e:86 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb1: port = 0xd880-0xd89f mem = 0xdf620000-0xdf63ffff,0xdf600000-0xdf61ffff,0xdf5dc000-0xdf5dffff irq 17 = at device 0.1 on pci6 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: c8:0a:a9:c8:7e:87 igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 12 igb1: Bound queue 5 to cpu 13 igb1: Bound queue 6 to cpu 14 igb1: Bound queue 7 to cpu 15 I won't be able to physically swap the two ports until later this week = but now I think this might be a bug somewhere rather than a config = issue. -- aew --Apple-Mail=_A70DC928-1D3B-4609-A549-4CF0A7EA0595 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=signature.asc Content-Type: application/pgp-signature; name=signature.asc Content-Description: Message signed with OpenPGP using GPGMail -----BEGIN PGP SIGNATURE----- Comment: GPGTools - http://gpgtools.org iQGcBAEBCAAGBQJVdY8OAAoJELCrT6gHg/Vq52AMAJZ+ohI9hDWS3L2DsTEI+ZM4 Fh1wg/p7JJO6bq256mGbVYSPKuHeuEXU2ynfIDuQWOgJ5BZ25XGkQzQXmiEhUScg Ifye/KbECnehyOW1rLX2jpeqFVi1iDixbPOBq75KHDoV2IZT0KmvYSztkoSIIA5r jMxBYwldVopyJ7+1s84stNTr+fddKOONtYSuSrXjWmlmsQ1PcmIBGYA87qYlCS+9 8Kcq4hsY9o2jCcCHuz7VIpz1XQakeLNM8ed7WuVhMzvG3vkdMhZky/TbksZH9TxJ 7pOPTDTw6v5PytE7RjPuEiYCUq/xWjMx+9ZdZi/XfsF478pZcRbGURt3h8t4eyAX rA+0CLdKyy9I9GWOqJpaeEPJpQsUKAV5emlINVJ5kYxyoB/M+gi7n7NV+tcO92BV pVtThpW+6qY7Hxaeki1eNGWui24i5IJjJ2YbfdUv/Sey3OvgYTmQzJRc0oYdJ/1w VhewARZ9jS+bH6g9tWtGXN9AN3fBVf3XgYPcLEwVhA== =YNGP -----END PGP SIGNATURE----- --Apple-Mail=_A70DC928-1D3B-4609-A549-4CF0A7EA0595-- From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 19:16:13 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 0CCB1FAB for ; Mon, 8 Jun 2015 19:16:13 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from bs1.fjl.org.uk (bs1.fjl.org.uk [84.45.41.196]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "bs1.fjl.org.uk", Issuer "bs1.fjl.org.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 95F8C1815 for ; Mon, 8 Jun 2015 19:16:11 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from [192.168.1.35] (mux.fjl.org.uk [62.3.120.246]) (authenticated bits=0) by bs1.fjl.org.uk (8.14.4/8.14.4) with ESMTP id t58IsKFr071953 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES128-SHA bits=128 verify=NO) for ; Mon, 8 Jun 2015 19:54:26 +0100 (BST) (envelope-from frank2@fjl.co.uk) Message-ID: <5575E4DC.1060204@fjl.co.uk> Date: Mon, 08 Jun 2015 19:54:20 +0100 From: Frank Leonhardt User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: jails References: <55744D39.9020409@columbus.rr.com> In-Reply-To: <55744D39.9020409@columbus.rr.com> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 19:16:13 -0000 On 07/06/2015 14:55, Baho Utot wrote: > > I have FreeBSD 10.1 and trying to setup a jail according to the handbook: > > > 15.3. Creating and Controlling Jails > > |#| *|setenv D/|/staorage/jails/crochet|/|* > |#| *|mkdir -p $D|* > |#| *|cd /usr/src|* > |#| *|make buildworld|* > |#| *|make installworld DESTDIR=$D|* > |#| *|make distribution DESTDIR=$D|* > |#| *|mount -t devfs devfs $D/dev|* > ..... Your question has already been answered, but you might also like to know... The make buildworld stuff isn't strictly necessary, but it's always documented that way for some reason. I believe running buildworld from time to time is somehow good for the soul. In reality you can just copy all the files from a working FreeBSD installation in to the directory of your choice, call it an jail and it will probably run quite happily, assuming its binary compatible. This is fantastically useful. If you do build a "clean" installation as above, tar it before you run it so you can (a) restore it if you make a mess inside the jail; (b) make a extra jail VMs quickly. You can also clone a jail simply by copy the directory and adding an appropriate config file entry. Regards, Frank. From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 19:58:13 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 68268F2C for ; Mon, 8 Jun 2015 19:58:13 +0000 (UTC) (envelope-from baho-utot@columbus.rr.com) Received: from cdptpa-oedge-vip.email.rr.com (cdptpa-outbound-snat.email.rr.com [107.14.166.231]) by mx1.freebsd.org (Postfix) with ESMTP id 2C2E911D0 for ; Mon, 8 Jun 2015 19:58:12 +0000 (UTC) (envelope-from baho-utot@columbus.rr.com) Received: from [75.187.32.8] ([75.187.32.8:46500] helo=raspberrypi.bildanet.com) by cdptpa-oedge02 (envelope-from ) (ecelerity 3.5.0.35861 r(Momo-dev:tip)) with ESMTP id D9/35-24231-EC3F5755; Mon, 08 Jun 2015 19:58:06 +0000 Received: from [192.168.1.53] (helo=baho-utot.bildanet.com) by raspberrypi.bildanet.com with esmtp (Exim 4.84) (envelope-from ) id 1Z23BO-0005ka-5Y for freebsd-questions@freebsd.org; Mon, 08 Jun 2015 15:58:06 -0400 Message-ID: <5575F3CD.3010204@columbus.rr.com> Date: Mon, 08 Jun 2015 15:58:05 -0400 From: Baho Utot User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: jails References: <55744D39.9020409@columbus.rr.com> <5575E4DC.1060204@fjl.co.uk> In-Reply-To: <5575E4DC.1060204@fjl.co.uk> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-RR-Connecting-IP: 107.14.168.130:25 X-Cloudmark-Score: 0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 19:58:13 -0000 On 06/08/15 14:54, Frank Leonhardt wrote: > On 07/06/2015 14:55, Baho Utot wrote: >> >> I have FreeBSD 10.1 and trying to setup a jail according to the >> handbook: >> >> >> 15.3. Creating and Controlling Jails >> >> |#| *|setenv D/|/staorage/jails/crochet|/|* >> |#| *|mkdir -p $D|* >> |#| *|cd /usr/src|* >> |#| *|make buildworld|* >> |#| *|make installworld DESTDIR=$D|* >> |#| *|make distribution DESTDIR=$D|* >> |#| *|mount -t devfs devfs $D/dev|* >> > ..... > > tar it before you run it so you can (a) restore it if you make a mess > inside the jail; Making a mess is the only thing I am good at....Just ask my wife. From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 20:00:09 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 4C5E0107 for ; Mon, 8 Jun 2015 20:00:09 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from bs1.fjl.org.uk (bs1.fjl.org.uk [84.45.41.196]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "bs1.fjl.org.uk", Issuer "bs1.fjl.org.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id EE0FE12E8 for ; Mon, 8 Jun 2015 20:00:08 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from [192.168.1.35] (mux.fjl.org.uk [62.3.120.246]) (authenticated bits=0) by bs1.fjl.org.uk (8.14.4/8.14.4) with ESMTP id t58Jxp4O097491 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES128-SHA bits=128 verify=NO) for ; Mon, 8 Jun 2015 20:59:51 +0100 (BST) (envelope-from frank2@fjl.co.uk) Message-ID: <5575F437.5010702@fjl.co.uk> Date: Mon, 08 Jun 2015 20:59:51 +0100 From: Frank Leonhardt User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: best options for a *WORKING* MTA References: In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 20:00:09 -0000 On 01/06/2015 17:48, Aryeh Friedman wrote: > I have tried every which way I can find in the handbook and/or on the net > to get a working mail server and the best I can do get the default sendmail > to answer on localhost only (postfix seems to be completely broken). > Where can I find a good *SIMPLE* set of instructions on how to set up a > working mail server to accept mail for my domain? > I've skimmed through this thread, and at the risk of getting mixed up in a long-running holy between MTAs, I have to say that sendmail may be old and clunky, but it chugs along and is standard; you need a reason to deviate from a standard and you haven't articulated one for your requriements. I'm surprised you're having difficult running it because over many years I've always found it to work "out of the box." Rather than going off with other MTAs, no one seems to be wondering why you're getting to it via the loopback interface not the external. Have you considered whether it is able to bind to the external address? For example, are you starting sendmail BEFORE the external address is configured? No address, nothing to bind to and they symptoms you describe. Whatever you problem, it's probably something trivial like this, because sendmail does, most definitely, work. Regards, Frank. From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 20:09:09 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 6F9B0660 for ; Mon, 8 Jun 2015 20:09:09 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from bs1.fjl.org.uk (bs1.fjl.org.uk [84.45.41.196]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "bs1.fjl.org.uk", Issuer "bs1.fjl.org.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 1F11A14D0 for ; Mon, 8 Jun 2015 20:09:08 +0000 (UTC) (envelope-from frank2@fjl.co.uk) Received: from [192.168.1.35] (mux.fjl.org.uk [62.3.120.246]) (authenticated bits=0) by bs1.fjl.org.uk (8.14.4/8.14.4) with ESMTP id t58K8s3T001124 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES128-SHA bits=128 verify=NO) for ; Mon, 8 Jun 2015 21:09:01 +0100 (BST) (envelope-from frank2@fjl.co.uk) Message-ID: <5575F657.1040301@fjl.co.uk> Date: Mon, 08 Jun 2015 21:08:55 +0100 From: Frank Leonhardt User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Swap exhaustion References: <1CD13C1C-5344-4909-A061-F25FBB86AFF9@lafn.org> In-Reply-To: <1CD13C1C-5344-4909-A061-F25FBB86AFF9@lafn.org> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 20:09:09 -0000 On 28/05/2015 00:49, Doug Hardie wrote: > I have a process that is eating up 6 GB of swap space. At that point, FreeBSD 9.3 terminates a process. However, occasionally its not the one eating up the space. When I manually quit the process then the swap space returns to a few KB used. The system runs fine after that. > > I have very little knowledge of what this process is doing internally but would like to know what might be causing this issue. There are 5 of these processes running (parent plus 4 children). Normally each uses about 90 MB RES/SIZE. However when the problem occurs they are about 2GB RES/SIZE each. The system has 4 GB memory. I thought that a malloc would not be able to grab that much memory, even with swapping as it has to be in memory. Could a malloc cause this growth in process size or need I look elsewhere? > > > Been there and done that :-) While this doesn't directly answer you're question, I wrote some stuff up about it here: http://blog.frankleonhardt.com/2011/large-swap-files-on-freebsd-die-with-mystery-killed-howto-add-lots-of-swap-space/ It was a while ago,and I'm a bit hazy, but I remember debugged the issue by modifying the kernel files I mention in order to tell me what was going on. It's actually very easy to do. Regards, Frank. From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:17:48 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 89536B4C for ; Mon, 8 Jun 2015 21:17:48 +0000 (UTC) (envelope-from che@bein.link) Received: from mail.bein.link (bein.link [37.252.124.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 4F90C165B for ; Mon, 8 Jun 2015 21:17:47 +0000 (UTC) (envelope-from che@bein.link) Received: from thinkpad.localnet (home.bein.link [172.16.32.6]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.bein.link (Postfix) with ESMTPSA id 15D5C1AF1BF; Mon, 8 Jun 2015 21:17:36 +0000 (UTC) From: Maxim V Filimonov To: freebsd-questions@freebsd.org Reply-To: che@bein.link Cc: Frank Leonhardt Subject: Re: jails Date: Tue, 09 Jun 2015 00:17:37 +0300 Message-ID: <7987536.PjAn0HZS7E@thinkpad> User-Agent: KMail/4.14.3 (FreeBSD/10.1-RELEASE-p10; KDE/4.14.3; amd64; ; ) In-Reply-To: <5575E4DC.1060204@fjl.co.uk> References: <55744D39.9020409@columbus.rr.com> <5575E4DC.1060204@fjl.co.uk> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:17:48 -0000 On Monday 08 June 2015 19:54:20 Frank Leonhardt wrote: > On 07/06/2015 14:55, Baho Utot wrote: > > I have FreeBSD 10.1 and trying to setup a jail according to the handbook: > > 15.3. Creating and Controlling Jails > > | > > |#| *|setenv D/|/staorage/jails/crochet|/|* > > |#| *|mkdir -p $D|* > > |#| *|cd /usr/src|* > > |#| *|make buildworld|* > > |#| *|make installworld DESTDIR=$D|* > > |#| *|make distribution DESTDIR=$D|* > > |#| *|mount -t devfs devfs $D/dev|* > > ..... > > Your question has already been answered, but you might also like to know... > > The make buildworld stuff isn't strictly necessary, but it's always > documented that way for some reason. I believe running buildworld from > time to time is somehow good for the soul. > > In reality you can just copy all the files from a working FreeBSD > installation in to the directory of your choice, call it an jail and it > will probably run quite happily, assuming its binary compatible. This is > fantastically useful. If you do build a "clean" installation as above, > tar it before you run it so you can (a) restore it if you make a mess > inside the jail; (b) make a extra jail VMs quickly. You can also clone a > jail simply by copy the directory and adding an appropriate config file > entry. > > Regards, Frank. > You can also use bsdinstall to install a fresh, clean base system into a jail. -- wbr, Maxim Filimonov From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:22:20 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C99C9C41 for ; Mon, 8 Jun 2015 21:22:20 +0000 (UTC) (envelope-from che@bein.link) Received: from mail.bein.link (bein.link [37.252.124.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8E85F1879 for ; Mon, 8 Jun 2015 21:22:20 +0000 (UTC) (envelope-from che@bein.link) Received: from thinkpad.localnet (home.bein.link [172.16.32.6]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.bein.link (Postfix) with ESMTPSA id B06AE1AF1F9 for ; Mon, 8 Jun 2015 21:22:16 +0000 (UTC) From: Maxim V Filimonov To: freebsd-questions@freebsd.org Reply-To: che@bein.link Subject: Junk mail on list reply Date: Tue, 09 Jun 2015 00:22:18 +0300 Message-ID: <1647612.8LsUtL0D9u@thinkpad> User-Agent: KMail/4.14.3 (FreeBSD/10.1-RELEASE-p10; KDE/4.14.3; amd64; ; ) MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="nextPart5017804.F10i2rCIs7" Content-Transfer-Encoding: 7Bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:22:20 -0000 This is a multi-part message in MIME format. --nextPart5017804.F10i2rCIs7 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Recently, I started getting junk emails every time I reply to someone in any of the FreeBSD Mailing Lists. The messages look like the one attached. Can anyone do anything with that? Can I consult anyone to fix that? Why is that happening after all? -- wbr, Maxim Filimonov --nextPart5017804.F10i2rCIs7 Content-Type: message/rfc822 Content-Disposition: inline; filename="forwarded message" Content-Description: jzsf@vip.sina.com: =?UTF-8?B?6Ieq5Yqo5Zue5aSN77yaUmU6?= jails Return-Path: X-Original-To: che@bein.link Delivered-To: che@bein.link Received: from smtp546-46.vip.sina.com.cn (r3-64.sinamail.sina.com.cn [202.108.3.64]) by mail.bein.link (Postfix) with SMTP id 5515F1AF386 for ; Mon, 8 Jun 2015 21:18:24 +0000 (UTC) Received: (qmail 16398 invoked by uid 542); 9 Jun 2015 05:18:07 +0800 (CST) SMAIL-SPAM-FILTER: 16397 OK; Tue, 9 Jun 2015 05:18:07 +0800 (CST) X-SGroup: ow Received: from unknown( HELO agent04.vmail.yz.sinanode.com)([10.39.32.54]) by vip.sina.com with SMTP 9 Jun 2015 05:18:07 +0800 (CST) X-Sender: jzsf+==y2hlqgjlaw4ubgluaw====@vip.sina.com X-SMAIL-MID: 8930892019443 Received: by agent04.vmail.yz.sinanode.com (Postfix, from userid 99) id 6E7DC9CA42C; Tue, 9 Jun 2015 05:18:07 +0800 (CST) Auther: VipMail_1.0 (REM) From: jzsf@vip.sina.com To: che@bein.link Subject: =?UTF-8?B?6Ieq5Yqo5Zue5aSN77yaUmU6?= jails Sender: jzsf+==Y2hlQGJlaW4ubGluaw====@vip.sina.com MIME_version: 1.0 Content-Type: text/plain; charset="utf-8"; format="flowed" Content-Transfer-Encoding: base64 Message-ID: <20150608211807.6E7DC9CA42C@agent04.vmail.yz.sinanode.com> Date: Tue, 09 Jun 2015 05:18:07 +0800 X-Spamd-Result: default: False [1.75 / 100.00] HFILTER_HELO_IP_A(1.00) FORGED_SENDER(0.30) HFILTER_MID_NORES_A_OR_MX(0.50) RCVD_IN_DNSWL_NONE(-0.05) R_SPF_SOFTFAIL(0.00) X-Spamd-Server: localhost X-Spamd-Scan-Time: 1.07 X-Spamd-Queue-ID: 5515F1AF386 MIME-Version: 1.0 5bey5pS25Yiw5oKo55qE5p2l5L+h77yBDQogICAgICAgICDosKLosKLvvIENCiAgICAgICAgICAg ICDojYblt57nm5vlj5E= --nextPart5017804.F10i2rCIs7-- From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:25:30 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id DB42ADEA for ; Mon, 8 Jun 2015 21:25:29 +0000 (UTC) (envelope-from jon@radel.com) Received: from radel.com (fly.radel.com [70.184.242.170]) (using TLSv1 with cipher RC4-SHA (128/128 bits)) (Client CN "*.radel.com", Issuer "COMODO RSA Domain Validation Secure Server CA" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 94AD518B5 for ; Mon, 8 Jun 2015 21:25:28 +0000 (UTC) (envelope-from jon@radel.com) X-CGP-ClamAV-Result: CLEAN X-VirusScanner: Niversoft's CGPClamav Helper v1.18.7 (ClamAV engine v0.98.7) Received: from [192.168.43.232] (account jon@radel.com HELO gravenstein.local) by radel.com (CommuniGate Pro SMTP 6.1.2 _community_) with ESMTPSA id 686152 for freebsd-questions@freebsd.org; Mon, 08 Jun 2015 21:25:21 +0000 Message-ID: <5576083F.1080305@radel.com> Date: Mon, 08 Jun 2015 17:25:19 -0400 From: Jon Radel User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Junk mail on list reply References: <1647612.8LsUtL0D9u@thinkpad> In-Reply-To: <1647612.8LsUtL0D9u@thinkpad> Content-Type: multipart/signed; protocol="application/pkcs7-signature"; micalg=sha1; boundary="------------ms010606080705020306030608" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:25:30 -0000 This is a cryptographically signed message in MIME format. --------------ms010606080705020306030608 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: quoted-printable On 6/8/15 5:22 PM, Maxim V Filimonov wrote: > Recently, I started getting junk emails every time I reply to someone i= n any > of the FreeBSD Mailing Lists. The messages look like the one attached. = Can > anyone do anything with that? Can I consult anyone to fix that? Why is = that > happening after all? > Because some people can't be trusted to use auto-responders properly. =20 Not much to do unless the guilty parties are forcibly removed from the=20 mailing list. --Jon Radel jon@radel.com --------------ms010606080705020306030608 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIKrzCC BK8wggOXoAMCAQICEQDgI8sVEoNTia1hbnpUZ2shMA0GCSqGSIb3DQEBCwUAMG8xCzAJBgNV BAYTAlNFMRQwEgYDVQQKEwtBZGRUcnVzdCBBQjEmMCQGA1UECxMdQWRkVHJ1c3QgRXh0ZXJu YWwgVFRQIE5ldHdvcmsxIjAgBgNVBAMTGUFkZFRydXN0IEV4dGVybmFsIENBIFJvb3QwHhcN MTQxMjIyMDAwMDAwWhcNMjAwNTMwMTA0ODM4WjCBmzELMAkGA1UEBhMCR0IxGzAZBgNVBAgT EkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2FsZm9yZDEaMBgGA1UEChMRQ09NT0RP IENBIExpbWl0ZWQxQTA/BgNVBAMTOENPTU9ETyBTSEEtMjU2IENsaWVudCBBdXRoZW50aWNh dGlvbiBhbmQgU2VjdXJlIEVtYWlsIENBMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKC AQEAibEN2npTGU5wUh28VqYGJre4SeCW51Gr8fBaE0kVo7SMG2C8elFCp3mMpCLfF2FOkdV2 IwoU00oCf7YdCYBupQQ92bq7Fv6hh6kuQ1JDFnyvMlDIpk9a6QjYz5MlnHuI6DBk5qT4VoD9 KiQUMxeZrETlaYujRgZLwjPU6UCfBrCxrJNAubUIkzqcKlOjENs9IGE8VQOO2U52JQIhKfqj fHF2T+7hX4Hp+1SA28N7NVK3hN4iPSwwLTF/Wb1SN7AzaS1D6/rWpfGXd2dRjNnuJ+u8pQc4 doykqTj/34z1A6xJvsr3c5k6DzKrnJU6Ez0ORjpXdGFQvsZAP8vk4p+iIQIDAQABo4IBFzCC ARMwHwYDVR0jBBgwFoAUrb2YejS0Jvf6xCZU7wO94CTLVBowHQYDVR0OBBYEFJJha4LhoqCq T+xn8cKj97SAAMHsMA4GA1UdDwEB/wQEAwIBhjASBgNVHRMBAf8ECDAGAQH/AgEAMB0GA1Ud JQQWMBQGCCsGAQUFBwMCBggrBgEFBQcDBDARBgNVHSAECjAIMAYGBFUdIAAwRAYDVR0fBD0w OzA5oDegNYYzaHR0cDovL2NybC51c2VydHJ1c3QuY29tL0FkZFRydXN0RXh0ZXJuYWxDQVJv b3QuY3JsMDUGCCsGAQUFBwEBBCkwJzAlBggrBgEFBQcwAYYZaHR0cDovL29jc3AudXNlcnRy dXN0LmNvbTANBgkqhkiG9w0BAQsFAAOCAQEAGypurFXBOquIxdjtzVXzqmthK8AJECOZD8Vm am+x9bS1d14PAmEA330F/hKzpICAAPz7HVtqcgIKQbwFusFY1SbC6tVNhPv+gpjPWBvjImOc Uvi7BTarfVil3qs7Y+Xa1XPv7OD7e+Kj//BCI5zKto1NPuRLGAOyqC3U2LtCS5BphRDbpjc0 6HvgARClnMo6x59PiDRuimXQGoq7qdzKyjbR9PzCZCk1r9axp3ER0gNDsY8+muyeMlP0dpLK hjQHuSzK5hxK2JkNwYbikJL7WkJqIyEQ6WXH9dW7fuqMhSACYurROgcsWcWZM/I4ieW26RZ6 H3kU9koQGib6fIr7mzCCBfgwggTgoAMCAQICEHNU5Tx9a7TNDWBpDfzOARswDQYJKoZIhvcN AQELBQAwgZsxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAO BgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMUEwPwYDVQQDEzhD T01PRE8gU0hBLTI1NiBDbGllbnQgQXV0aGVudGljYXRpb24gYW5kIFNlY3VyZSBFbWFpbCBD QTAeFw0xNTAzMzAwMDAwMDBaFw0xODAzMjkyMzU5NTlaMIH6MQswCQYDVQQGEwJVUzEOMAwG A1UEERMFMjIxNTAxCzAJBgNVBAgTAlZBMRQwEgYDVQQHEwtTcHJpbmdmaWVsZDEaMBgGA1UE CRMRNjkxNyBSaWRnZXdheSBEci4xFTATBgNVBAoTDEpvbiBULiBSYWRlbDEyMDAGA1UECxMp SXNzdWVkIHRocm91Z2ggSm9uIFQuIFJhZGVsIEUtUEtJIE1hbmFnZXIxHzAdBgNVBAsTFkNv cnBvcmF0ZSBTZWN1cmUgRW1haWwxEjAQBgNVBAMTCUpvbiBSYWRlbDEcMBoGCSqGSIb3DQEJ ARYNam9uQHJhZGVsLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAN7VG2H2 FtCpo4Of74Ll1UBAf2czZUfeg9rNm587CYgbZJcj+/c+56ZxBDcmSGalDTqBizPJduRMIuyq 8R9qViPzWN238rmVPhpV2PQt8khbJNxT3lXauwK4exK+f8+chywS1eDnesK2pLgQ60n27etj aE/xgKLLPXJjeaficomz3cwcbgCRdi5WnN9ogAMRNxWsD6trO9cR+cMldcNln1m65XXTrIii 86+FhZKVpW7yetIcmNcVkjYhfCAh5UGgyKHfK7osuPXgj9h1nSsgDwr5Q0H41bpGLe7AdcFu viOHdmqSuohVSt/VV7JuF2slx2pd0w0eMoNKUKhrFhFsvLUCAwEAAaOCAdUwggHRMB8GA1Ud IwQYMBaAFJJha4LhoqCqT+xn8cKj97SAAMHsMB0GA1UdDgQWBBTP1gHXRYR8E0eyRHCj/S+H yppC7DAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIwADAdBgNVHSUEFjAUBggrBgEFBQcD BAYIKwYBBQUHAwIwRgYDVR0gBD8wPTA7BgwrBgEEAbIxAQIBAwUwKzApBggrBgEFBQcCARYd aHR0cHM6Ly9zZWN1cmUuY29tb2RvLm5ldC9DUFMwXQYDVR0fBFYwVDBSoFCgToZMaHR0cDov L2NybC5jb21vZG9jYS5jb20vQ09NT0RPU0hBMjU2Q2xpZW50QXV0aGVudGljYXRpb25hbmRT ZWN1cmVFbWFpbENBLmNybDCBkAYIKwYBBQUHAQEEgYMwgYAwWAYIKwYBBQUHMAKGTGh0dHA6 Ly9jcnQuY29tb2RvY2EuY29tL0NPTU9ET1NIQTI1NkNsaWVudEF1dGhlbnRpY2F0aW9uYW5k U2VjdXJlRW1haWxDQS5jcnQwJAYIKwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmNvbW9kb2NhLmNv bTAYBgNVHREEETAPgQ1qb25AcmFkZWwuY29tMA0GCSqGSIb3DQEBCwUAA4IBAQBLU976AGA/ 5JD9rkjl7vNfRGDQOEffvwseVmLEmBLot8I8vZ50oxRCLdOH0Zd8uN17J5a4xajP3blnMEdw /CQF4f6Iz8ASG7QOGLSSin+nrqD20Q8lRn8oOyrF100OsPRPKmff/fekdOMkQOrJ3MCDAHQ2 fxuWkxupLBP6PzC49qR8uyPVxIPNetMsuyYhAHtq4DJphd1bJbxirDffqstQK+M5R+eo47KN WyJ5PD/Q8ug4clobJ7P5W1Xh7KLqnVI2JffYD5+/EEzMpAsKiQTjdxci1z06TOr/9/Z+68an Xuvyambg6OMzkTaTCyD1sE9QExHj+zGiwpUufSj2vGWjMYIEMTCCBC0CAQEwgbAwgZsxCzAJ BgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZv cmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMUEwPwYDVQQDEzhDT01PRE8gU0hBLTI1 NiBDbGllbnQgQXV0aGVudGljYXRpb24gYW5kIFNlY3VyZSBFbWFpbCBDQQIQc1TlPH1rtM0N YGkN/M4BGzAJBgUrDgMCGgUAoIICVTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqG SIb3DQEJBTEPFw0xNTA2MDgyMTI1MTlaMCMGCSqGSIb3DQEJBDEWBBQWURnvX7+tm0438XsF EiIXdy5pBTBsBgkqhkiG9w0BCQ8xXzBdMAsGCWCGSAFlAwQBKjALBglghkgBZQMEAQIwCgYI KoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIHMA0GCCqG SIb3DQMCAgEoMIHBBgkrBgEEAYI3EAQxgbMwgbAwgZsxCzAJBgNVBAYTAkdCMRswGQYDVQQI ExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9E TyBDQSBMaW1pdGVkMUEwPwYDVQQDEzhDT01PRE8gU0hBLTI1NiBDbGllbnQgQXV0aGVudGlj YXRpb24gYW5kIFNlY3VyZSBFbWFpbCBDQQIQc1TlPH1rtM0NYGkN/M4BGzCBwwYLKoZIhvcN AQkQAgsxgbOggbAwgZsxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0 ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMUEwPwYD VQQDEzhDT01PRE8gU0hBLTI1NiBDbGllbnQgQXV0aGVudGljYXRpb24gYW5kIFNlY3VyZSBF bWFpbCBDQQIQc1TlPH1rtM0NYGkN/M4BGzANBgkqhkiG9w0BAQEFAASCAQA2vYqXgs3jcMi+ a+7LvXlv7hwQr+PYAsMmXCWRR+BVsYcdMG3saW66kbZoCOq35RTtdKgPEsBvpG87rw1TdGrl 2R5v624wyjvjdzARtv157A4BjNRZZSYI+unHqD/4au712n56Q8+HhVORav93ZW6KiK27majl cHGw72sIwk+Gf85jKugQrlrW6pELkF4CdPomzeVWVcSfTlfry0syxYXQF40HPaMgEnszGLkM AZBFhsYJaPwg10dK5m7j/c+0qAiFBe3VlXrv5aHB/xk7JccRoDKa921PIyCQ6Xm6C5JowXno soeN5V+Rdspc74sDuIRfh1Z5m56jQoEyXxPaQehmAAAAAAAA --------------ms010606080705020306030608-- From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:38:01 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 8C77A233 for ; Mon, 8 Jun 2015 21:38:01 +0000 (UTC) (envelope-from jekillen@prodigy.net) Received: from nm22-vm6.access.bullet.mail.gq1.yahoo.com (nm22-vm6.access.bullet.mail.gq1.yahoo.com [216.39.63.170]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 5B5F11B2A for ; Mon, 8 Jun 2015 21:38:00 +0000 (UTC) (envelope-from jekillen@prodigy.net) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=prodigy.net; s=s2048; t=1433799349; bh=8UiW2nStHwrMB4DrhSv/IXZmiZrBVoixmOKRDZeL8V0=; h=Cc:From:To:In-Reply-To:Subject:Date:References:From:Subject; b=WVEN1nNmJK/wEDiQ7y2m8rLthrqB3/96+sR+5mz7wggtHpa/nedNipH9iooIn/k4VWbNn47Q8fOa5paqu3JKPC5CTxXn4gwRjOMKty798WerotCJprJNA5E9v/2ftTD4cd+eTDW/T0DSPDG3ZBVdKqCeDLYgRfFCiFcGEJXpjQbWdt7QW9TNedvm9bZZejdv27xQJG7y/HEP4c+5OjCVHFrzC4Yl3IS/sXrkXbS5pUkuPGGjIJEgyUqWXV2IgojX8b7vZhjIEwRryKFZCGBgUoIsZWAlmnSGXQ7mswzup+RC7Gh6272GGMiThksvkIJFykdnCOtz9RcnQ9Pmop4PdQ== Received: from [216.39.60.171] by nm22.access.bullet.mail.gq1.yahoo.com with NNFMP; 08 Jun 2015 21:35:49 -0000 Received: from [67.195.23.146] by tm7.access.bullet.mail.gq1.yahoo.com with NNFMP; 08 Jun 2015 21:35:49 -0000 Received: from [127.0.0.1] by smtp118.sbc.mail.gq1.yahoo.com with NNFMP; 08 Jun 2015 21:35:49 -0000 X-Yahoo-Newman-Id: 5884.27314.bm@smtp118.sbc.mail.gq1.yahoo.com X-Yahoo-Newman-Property: ymail-3 X-YMail-OSG: 8ZVpcQYVM1lragoRkuHzxtU7UKxM99esOYfRv7Zd1hO129B mO5dFMIDPuERv6hBMHm5OPYixyERnlEF_PLeWO66e5Wdb5_WNmSPiwA1AlN9 rBCG.c9TWIRO9yNijoP_UlrklIhf1sbrV4AWIhLUkQT8OnIRz7ZRQbWAOXVE aSJPyhoY_Bxw9N8EOvOymzVhGUzcCAGobHvRhMoEHnleHZnC.Wl3L_sH9xHi VPgvsNLiCCh64P0Xkee2qOi2Eyzw34bS7ZoaumMZPBAImkpBtvsAZ4Viauz. MT38SJaZ73kixKWNl5Oy3D4Iztn7mTuDDTfAd4VzoRGG351pSL3BWfIGBfbj kHimgKmtDAqT_K9CoqMzjWyp97s3fnbvbfcP3sL7Vdwycy6i3oKMCOpptHFG IOkFYggl_CPYxGBFoHwDnF2gUA7kzupqnNkGZeCEcdvJsX6N1735mmclI0dR jN6YpAMlrqBygBP3M8fCj4GTCJ3S58XSIGCrCMhAdD9zlNkHtDynFQcRQ7QM cv5TMZGeEiHto4A.jqQkUc52B2QeTBsV44DDlrKd.p.uoGjkB X-Yahoo-SMTP: 46rcWa.swBDnY9zvhIrsU2awgPSTQgUKFFrFJjEU8wwG Cc: "freebsd-questions@freebsd.org Questions" Message-Id: <688927DC-9B09-4B66-B52F-CA7EFE05EF81@prodigy.net> From: Jeffry Killen To: Jon Radel In-Reply-To: <5576083F.1080305@radel.com> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v936) Subject: Re: Junk mail on list reply Date: Mon, 8 Jun 2015 14:35:47 -0700 References: <1647612.8LsUtL0D9u@thinkpad> <5576083F.1080305@radel.com> X-Mailer: Apple Mail (2.936) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:38:01 -0000 On Jun 8, 2015, at 2:25 PM, Jon Radel wrote: > On 6/8/15 5:22 PM, Maxim V Filimonov wrote: >> Recently, I started getting junk emails every time I reply to >> someone in any >> of the FreeBSD Mailing Lists. The messages look like the one >> attached. Can >> anyone do anything with that? Can I consult anyone to fix that? Why >> is that >> happening after all? >> > Because some people can't be trusted to use auto-responders > properly. Not much to do unless the guilty parties are forcibly > removed from the mailing list. > I have also been getting this spam, originally when I signed up for the list. It is the first response to threads I have started and one was in echo back or reply to another thread. It's not extensive and can be easily ignored, but it is annoying JK From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:39:58 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 469E62F3 for ; Mon, 8 Jun 2015 21:39:58 +0000 (UTC) (envelope-from galtsev@kicp.uchicago.edu) Received: from cosmo.uchicago.edu (cosmo.uchicago.edu [128.135.70.90]) by mx1.freebsd.org (Postfix) with ESMTP id 240031B63 for ; Mon, 8 Jun 2015 21:39:57 +0000 (UTC) (envelope-from galtsev@kicp.uchicago.edu) Received: by cosmo.uchicago.edu (Postfix, from userid 48) id 10C23CB8CA4; Mon, 8 Jun 2015 16:39:51 -0500 (CDT) Received: from 128.135.70.2 (SquirrelMail authenticated user valeri) by cosmo.uchicago.edu with HTTP; Mon, 8 Jun 2015 16:39:50 -0500 (CDT) Message-ID: <61481.128.135.70.2.1433799590.squirrel@cosmo.uchicago.edu> In-Reply-To: <1647612.8LsUtL0D9u@thinkpad> References: <1647612.8LsUtL0D9u@thinkpad> Date: Mon, 8 Jun 2015 16:39:50 -0500 (CDT) Subject: Re: Junk mail on list reply From: "Valeri Galtsev" To: che@bein.link Cc: freebsd-questions@freebsd.org Reply-To: galtsev@kicp.uchicago.edu User-Agent: SquirrelMail/1.4.8-5.el5.centos.7 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:39:58 -0000 On Mon, June 8, 2015 4:22 pm, Maxim V Filimonov wrote: > Recently, I started getting junk emails every time I reply to someone in > any > of the FreeBSD Mailing Lists. The messages look like the one attached. Can > anyone do anything with that? Can I consult anyone to fix that? Why is > that > happening after all? Hi Maxim, from what have been discussed earlier about similar events related to posts to this list I can say: 1. these apparently foreign (with respect to the list language) e-mails appear to be auto-replies (by some likely subscribed to this list) 2. domain sina.com is notorious for these things (I for one consider it rudeness to allow any auto-reply sent to mail list, as well as messages in foreign language - at least I would never allow myself to do neither of of these two things) 3. list admin(s) are more likely to be reluctant to block the whole domain sina.com from this list (or their list server); I would respect their decision, even though it is different from what I would do. The best you probably can do is to block all mail from sina.com (including that re-sent through this list) on your end. Good luck! Valeri > -- > wbr, Maxim Filimonov > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++ From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:43:54 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 9B66F3CE for ; Mon, 8 Jun 2015 21:43:54 +0000 (UTC) (envelope-from rwmaillists@googlemail.com) Received: from mail-wi0-x22c.google.com (mail-wi0-x22c.google.com [IPv6:2a00:1450:400c:c05::22c]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 3E3371D7D for ; Mon, 8 Jun 2015 21:43:54 +0000 (UTC) (envelope-from rwmaillists@googlemail.com) Received: by wiwd19 with SMTP id d19so473659wiw.0 for ; Mon, 08 Jun 2015 14:43:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20120113; h=date:from:to:subject:message-id:in-reply-to:references:mime-version :content-type:content-transfer-encoding; bh=dtdOCgmEjA0uqATgYT5QIb1dh/OQGhcz8yLTDcLHLHU=; b=KKilHe6+EEdpnRSmi2KLVrvVp20efws8r+ZcPFfpC2EtGEVVedXRrY+h+vr1Jc44ZK SbkmXOXmyTgeUulhaJVrtdQvUgmkZBiQur8/+LNi3f9ImKbkuXKlDVAA+AJHPV701l5E k0VWIBftKZAMMrcJcTlhVkaY+3Dd+TthE0DfMHqEmCbDtJffzC6ghYl2RxvP3Gv3/69A a4PZnqp2sRywYggIfK9u8oqH5WT5xFIqS+FsxWoMOsbykwz7p3n0Bkoy1kdnmX4yeslM hNM8M2UquIlRimIOsQZuLbTe4cfP1/mEciWkpazQbCkKp5iP3nMhuAw1lTbra0Q0SirT KguQ== X-Received: by 10.180.7.199 with SMTP id l7mr8173048wia.28.1433799832447; Mon, 08 Jun 2015 14:43:52 -0700 (PDT) Received: from gumby.homeunix.com (4e5670ad.skybroadband.com. [78.86.112.173]) by mx.google.com with ESMTPSA id fb3sm2980874wib.21.2015.06.08.14.43.50 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 08 Jun 2015 14:43:51 -0700 (PDT) Date: Mon, 8 Jun 2015 22:43:49 +0100 From: RW To: freebsd-questions@freebsd.org Subject: Re: Swap exhaustion Message-ID: <20150608224349.14b5ae19@gumby.homeunix.com> In-Reply-To: <5575F657.1040301@fjl.co.uk> References: <1CD13C1C-5344-4909-A061-F25FBB86AFF9@lafn.org> <5575F657.1040301@fjl.co.uk> X-Mailer: Claws Mail 3.11.1 (GTK+ 2.24.27; amd64-portbld-freebsd10.0) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:43:54 -0000 On Mon, 08 Jun 2015 21:08:55 +0100 Frank Leonhardt wrote: > On 28/05/2015 00:49, Doug Hardie wrote: > > I have a process that is eating up 6 GB of swap space. .. The > > system has 4 GB memory. > > Been there and done that :-) While this doesn't directly answer > you're question, I wrote some stuff up about it here: > > http://blog.frankleonhardt.com/2011/large-swap-files-on-freebsd-die-with-mystery-killed-howto-add-lots-of-swap-space/ That for high ratios of swap to ram, this is only 1.5X ram. From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 21:46:41 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 530215F8 for ; Mon, 8 Jun 2015 21:46:41 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from mout.gmx.net (mout.gmx.net [212.227.15.18]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "mout.gmx.net", Issuer "TeleSec ServerPass DE-1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id DF0E01DAC for ; Mon, 8 Jun 2015 21:46:40 +0000 (UTC) (envelope-from patrickhess@gmx.net) Received: from desk8.phess.net ([95.88.11.237]) by mail.gmx.com (mrgmx003) with ESMTPSA (Nemesis) id 0Mdr7l-1YhWgF1iFJ-00PZzN for ; Mon, 08 Jun 2015 23:46:38 +0200 From: Patrick Hess To: freebsd-questions@freebsd.org Subject: Re: jails Date: Mon, 08 Jun 2015 23:46:37 +0200 Message-ID: <3311782.n9oG808xge@desk8.phess.net> User-Agent: KMail/4.14.2 (FreeBSD/10.1-RELEASE; KDE/4.14.2; i386; ; ) In-Reply-To: <5575E4DC.1060204@fjl.co.uk> References: <55744D39.9020409@columbus.rr.com> <5575E4DC.1060204@fjl.co.uk> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-Provags-ID: V03:K0:X6bRy2mgWEpgokQ4sk1rPAntjbCdYngsGbeR5lMpXmmAIQhogHL dL6uDhNL281AeMsVjm69S24587+xOyyWSI57eVQtOxKajN3dJf0petCE9+Od3nvLkMlAsbU JRYOeSUXBM1jD9+wvW+fzOK1NfOjv1xfLKZX2dFDufxZGVSWxUCXJxYqd07dpZ81ttKcSyR Mwe9GsDl/P9RFPMQoPvTQ== X-UI-Out-Filterresults: notjunk:1; X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 21:46:41 -0000 Frank Leonhardt wrote: > In reality you can just copy all the files from a working FreeBSD > installation in to the directory of your choice, call it an jail and > it will probably run quite happily, assuming its binary compatible. > This is fantastically useful. Indeed, that's also one of my favorite features of jails. Just take anything that even remotely looks like a base system, make a copy of it, and there's your brand new jail. I usually grab myself a base.txz, like those really fresh ones you can find on ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/ that still have that nice new car smell to them, extract it to a new directory, and then create a few basic configuration files (rc.conf, resolv.conf, etc.). That's really all there is to it. But there's definitely more than one way to do it, that's the beauty. Just pick the method you feel most comfortable with. Patrick From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 22:16:52 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B29F5C3B for ; Mon, 8 Jun 2015 22:16:52 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx01.qsc.de (mx01.qsc.de [213.148.129.14]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 75FF51509 for ; Mon, 8 Jun 2015 22:16:52 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from r56.edvax.de (port-92-195-91-165.dynamic.qsc.de [92.195.91.165]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx01.qsc.de (Postfix) with ESMTPS id 166C211F6; Tue, 9 Jun 2015 00:16:42 +0200 (CEST) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id t58MGgm5004012; Tue, 9 Jun 2015 00:16:42 +0200 (CEST) (envelope-from freebsd@edvax.de) Date: Tue, 9 Jun 2015 00:16:42 +0200 From: Polytropon To: che@bein.link Cc: freebsd-questions@freebsd.org Subject: Re: jails Message-Id: <20150609001642.5c78b067.freebsd@edvax.de> In-Reply-To: <7987536.PjAn0HZS7E@thinkpad> References: <55744D39.9020409@columbus.rr.com> <5575E4DC.1060204@fjl.co.uk> <7987536.PjAn0HZS7E@thinkpad> Reply-To: Polytropon Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 22:16:52 -0000 On Tue, 09 Jun 2015 00:17:37 +0300, Maxim V Filimonov wrote: > You can also use bsdinstall to install a fresh, clean base system into a jail. Or extract the distribution archives into the jail (basically what bsdinstall does, but easily via command line). -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 22:21:06 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id F095CD0B for ; Mon, 8 Jun 2015 22:21:06 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx01.qsc.de (mx01.qsc.de [213.148.129.14]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id B416B15EE for ; Mon, 8 Jun 2015 22:21:06 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from r56.edvax.de (port-92-195-91-165.dynamic.qsc.de [92.195.91.165]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx01.qsc.de (Postfix) with ESMTPS id 908593D3DF; Tue, 9 Jun 2015 00:21:04 +0200 (CEST) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id t58ML4pw004029; Tue, 9 Jun 2015 00:21:04 +0200 (CEST) (envelope-from freebsd@edvax.de) Date: Tue, 9 Jun 2015 00:21:04 +0200 From: Polytropon To: Jon Radel Cc: freebsd-questions@freebsd.org Subject: Re: Junk mail on list reply Message-Id: <20150609002104.49b24192.freebsd@edvax.de> In-Reply-To: <5576083F.1080305@radel.com> References: <1647612.8LsUtL0D9u@thinkpad> <5576083F.1080305@radel.com> Reply-To: Polytropon Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 22:21:07 -0000 On Mon, 08 Jun 2015 17:25:19 -0400, Jon Radel wrote: > Not much to do unless the guilty parties are forcibly removed from the > mailing list. The problem is that the auto-respond text is sent directly to the list participant who sent a message to the list. It seems that the source of the auto-responder has subscribed to the list and sends his reply when a new message arrives in his inbox - or, he's somehow harvesting new messages from the public list archives (web), in which case nothing can be done by the list admins directly; here, the individual recipients would have to block the auto-replies accordingly. However, just hitting DELETE for those messages fixes the problem. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Mon Jun 8 22:22:19 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B93AEE3D for ; Mon, 8 Jun 2015 22:22:19 +0000 (UTC) (envelope-from che@bein.link) Received: from mail.bein.link (bein.link [37.252.124.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7E0DA173A for ; Mon, 8 Jun 2015 22:22:19 +0000 (UTC) (envelope-from che@bein.link) Received: from thinkpad.localnet (home.bein.link [172.16.32.6]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.bein.link (Postfix) with ESMTPSA id 7BEEE1AF1C9; Mon, 8 Jun 2015 22:22:14 +0000 (UTC) From: Maxim V Filimonov To: freebsd-questions@freebsd.org, galtsev@kicp.uchicago.edu Reply-To: che@bein.link Subject: Re: Junk mail on list reply Date: Tue, 09 Jun 2015 01:22:17 +0300 Message-ID: <1602809.cR4Y0MRoRF@thinkpad> User-Agent: KMail/4.14.3 (FreeBSD/10.1-RELEASE-p10; KDE/4.14.3; amd64; ; ) In-Reply-To: <61481.128.135.70.2.1433799590.squirrel@cosmo.uchicago.edu> References: <1647612.8LsUtL0D9u@thinkpad> <61481.128.135.70.2.1433799590.squirrel@cosmo.uchicago.edu> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Jun 2015 22:22:19 -0000 On Monday 08 June 2015 16:39:50 Valeri Galtsev wrote: > On Mon, June 8, 2015 4:22 pm, Maxim V Filimonov wrote: > > Recently, I started getting junk emails every time I reply to someone in > > any > > of the FreeBSD Mailing Lists. The messages look like the one attached. Can > > anyone do anything with that? Can I consult anyone to fix that? Why is > > that > > happening after all? > > Hi Maxim, > > from what have been discussed earlier about similar events related to > posts to this list I can say: > > 1. these apparently foreign (with respect to the list language) e-mails > appear to be auto-replies (by some likely subscribed to this list) > I tried to translate that using Google Translate, and that was found to be some automatic replies. > 2. domain sina.com is notorious for these things (I for one consider it > rudeness to allow any auto-reply sent to mail list, as well as messages in > foreign language - at least I would never allow myself to do neither of of > these two things) > > 3. list admin(s) are more likely to be reluctant to block the whole domain > sina.com from this list (or their list server); I would respect their > decision, even though it is different from what I would do. > > The best you probably can do is to block all mail from sina.com (including > that re-sent through this list) on your end. > > Good luck! > Valeri Well, that's what I've done in the first place. Thank you for your kind and detailed reply. -- wbr, Maxim Filimonov From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 00:24:09 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id DE8349DD for ; Tue, 9 Jun 2015 00:24:09 +0000 (UTC) (envelope-from jnyhuis@uw.edu) Received: from mxout23.cac.washington.edu (mxout23.cac.washington.edu [140.142.32.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "mxout23.cac.washington.edu", Issuer "InCommon RSA Server CA" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id B674B1336 for ; Tue, 9 Jun 2015 00:24:09 +0000 (UTC) (envelope-from jnyhuis@uw.edu) Received: from smtp.washington.edu (smtp.washington.edu [69.91.245.9]) by mxout23.cac.washington.edu (8.14.4+UW14.03/8.14.4+UW15.02) with ESMTP id t590Ntb0028329 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK) for ; Mon, 8 Jun 2015 17:23:55 -0700 X-Auth-Received: from [172.16.2.54] (gate.htseq.org [140.142.225.254]) (authenticated authid=jnyhuis) by smtp.washington.edu (8.14.4+UW14.03/8.14.4+UW14.04) with ESMTP id t590NtUS000397 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES128-SHA bits=128 verify=NOT) for ; Mon, 8 Jun 2015 17:23:55 -0700 X-UW-Orig-Sender: jnyhuis@smtp.washington.edu Message-ID: <5576321B.3030506@uw.edu> Date: Mon, 08 Jun 2015 17:23:55 -0700 From: John Nyhuis User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: FreeBSD 10.1p10 defaultrouter not working Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-PMX-Version: 6.0.3.2322014, Antispam-Engine: 2.7.2.2107409, Antispam-Data: 2015.6.9.1216 X-PMX-Server: mxout23.cac.washington.edu X-Uwash-Spam: Gauge=IIIIIIII, Probability=8%, Report=' HTML_00_01 0.05, HTML_00_10 0.05, BODYTEXTP_SIZE_3000_LESS 0, BODY_SIZE_1600_1699 0, BODY_SIZE_2000_LESS 0, BODY_SIZE_5000_LESS 0, BODY_SIZE_7000_LESS 0, DATE_TZ_NA 0, FROM_EDU_TLD 0, __ANY_URI 0, __C230066_P5 0, __CT 0, __CTE 0, __CT_TEXT_PLAIN 0, __HAS_FROM 0, __HAS_MSGID 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __MOZILLA_MSGID 0, __MOZILLA_USER_AGENT 0, __PHISH_SPEAR_STRUCTURE_1 0, __SANE_MSGID 0, __SUBJ_ALPHA_END 0, __TO_MALFORMED_2 0, __TO_NO_NAME 0, __URI_NO_MAILTO 0, __URI_NO_PATH 0, __URI_NO_WWW 0, __USER_AGENT 0' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 00:24:10 -0000 I am trying to set a default route of 140.142.xyz.129 using the documented method of adding the line below to rc.conf: defaultrouter = "140.142.xyz.129" (the .xyz. is to protect the guilty... mainly me). ^_^ After restarting the netif and route services, I still don't see a default route being set. netstat -r shows: Internet: Destination Gateway Flags Netif Expire localhost link#7 UH lo0 140.142.xyz.128/25 link#8 U lagg0 140.142.xyz.141 link#8 UHS lo0 no default route is assigned... No logs of interest show up in messages, security, or dmesg.today The pertinent section of rc.conf looks like: cloned_interfaces="lagg0" defaultrouter="140.142.xyz.129" #create a LACP aggregate interface for the native 1G NICS ifconfig_bce0="up" ifconfig_bce1="up" ifconfig_lagg0="laggproto lacp laggport bce0 laggport bce1 140.142.xyz.141/25" This should all be good according to the FreeBSD handbook, but it does not work. I can manually set the default route using "route add default 140.142.xyz.129", but although the route is now listed, it does not work. If I comment the "ifconfig_lagg0" line, a default route does show up as expected, so this seems to be related to an incompatibility between a aggregate interface and a "defaultrouter" line in rc.conf. Either will work by themselves, but not both in the same rc.conf. Any wisdom you would be willing to share would be much appreciated... -- Thanks, John Nyhuis IT Manager, Stam Lab 2211 Elliott Avenue 6th Floor, 6S139 Seattle, WA 98121 O: (206)-267-1097 ext 220 F: (206)-441-3033 From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 01:26:41 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 5A0541E4 for ; Tue, 9 Jun 2015 01:26:41 +0000 (UTC) (envelope-from erichsfreebsdlist@alogt.com) Received: from alogt.com (alogt.com [69.36.191.58]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 3A29D116E for ; Tue, 9 Jun 2015 01:26:41 +0000 (UTC) (envelope-from erichsfreebsdlist@alogt.com) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=alogt.com; s=default; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Subject:Cc:To:From:Date; bh=fUB/Dg0f/9bisDDZT4uBHlwDHwZL1clbT352HnFe5iM=; b=UjtnR+DkXB1eoUBkWdN+k7h/5FOcXxEu8tSzHO+8dCO5iP2FraFhE6+9AczDy8Xwg2+RVrBOqzfanPn0e/2QrUmUOVagZw5KUCMZJQwrytPGjEqbY8IHxrhAITEnWG7mYmZlUb7OSG5PxeHVUYQK2PoyORsey6x1l/cuJaBpW4g=; Received: from [114.124.25.61] (port=59632 helo=B85M-HD3-0.alogt.com) by sl-508-2.slc.westdc.net with esmtpsa (TLSv1.2:AES128-GCM-SHA256:128) (Exim 4.85) (envelope-from ) id 1Z28JE-000AIK-O3; Mon, 08 Jun 2015 19:26:34 -0600 Date: Tue, 9 Jun 2015 09:26:25 +0800 From: Erich Dollansky To: Maxim V Filimonov Cc: freebsd-questions@freebsd.org Subject: Re: Junk mail on list reply Message-ID: <20150609092625.29030b90@B85M-HD3-0.alogt.com> In-Reply-To: <1647612.8LsUtL0D9u@thinkpad> References: <1647612.8LsUtL0D9u@thinkpad> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - sl-508-2.slc.westdc.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - alogt.com X-Get-Message-Sender-Via: sl-508-2.slc.westdc.net: authenticated_id: erichsfreebsdlist@alogt.com X-Source: X-Source-Args: X-Source-Dir: X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 01:26:41 -0000 Hi, On Tue, 09 Jun 2015 00:22:18 +0300 Maxim V Filimonov wrote: > Recently, I started getting junk emails every time I reply to someone > in any of the FreeBSD Mailing Lists. The messages look like the one > attached. Can anyone do anything with that? Can I consult anyone to > fix that? Why is that happening after all? it is very easy to filter. For me, all FreeBSD related e-mail not originating from freebsd.org goes directly into spam. It is not only this kind of spam, there is also a lot of harvesting taking place which adds up over time. Erich From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 01:41:43 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id F25EE5E4 for ; Tue, 9 Jun 2015 01:41:42 +0000 (UTC) (envelope-from pathiaki2@yahoo.com) Received: from nm6.bullet.mail.bf1.yahoo.com (nm6.bullet.mail.bf1.yahoo.com [98.139.212.165]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A34BA1579 for ; Tue, 9 Jun 2015 01:41:41 +0000 (UTC) (envelope-from pathiaki2@yahoo.com) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s2048; t=1433813894; bh=K4MNzP6pJs7Sy6wXT4zmmO/7xLwH/bl1+U4mIvu5T8U=; h=Date:From:To:Subject:References:In-Reply-To:From:Subject; b=LHEA1d35kG6r0eqI5kD2JCztMxd0UDkAZQiiCGzMt0Ulro7vaP5S1bZChrukKJPjE2X2++2fGPAY3uNgTP0yev7fhZbuEaNMZO/24BryqbJIWriiIzRUB8sAKmiswtH5Nud1UcOLxdjenNfzNn3cB1f+H6EL8cXnNfikkwX3XFh/t9zaL/3RvZrXTT3D6ckVBiqTk3Nfig8xr3r2+5g/C7z3auRUUnKbUt6QoWjXRMkQqOEYyU449rapL9mdYu4fSBnUh3l+yNNFNJEBo2hvYp8/sFIMmkNlkd/t/a6YTKjSX+a8gqiWRLyb0cYWrrt1GRHhXOuP3kkDVBod5Uts0w== Received: from [98.139.170.179] by nm6.bullet.mail.bf1.yahoo.com with NNFMP; 09 Jun 2015 01:38:14 -0000 Received: from [98.139.213.14] by tm22.bullet.mail.bf1.yahoo.com with NNFMP; 09 Jun 2015 01:38:14 -0000 Received: from [127.0.0.1] by smtp114.mail.bf1.yahoo.com with NNFMP; 09 Jun 2015 01:38:14 -0000 X-Yahoo-Newman-Id: 7576.44098.bm@smtp114.mail.bf1.yahoo.com X-Yahoo-Newman-Property: ymail-3 X-YMail-OSG: 6RxEjREVM1mchkssc1JSEH9Dqpwz0R48WICqnQtsQ7zI7l3 meg3TZ2koxEBtOEkxXhuw82y3ef7lS0wKbne7Y8KeNglUXzkThujvSmbtPs6 muRHdjKVPBH7XXvyAqThDb59ab6WyqsmbUCu.yDza6CU7PaXQ46GI1xNQKDy 3i4eGo7jOq41SOVzrX_bI4Ae3uHBgeqrVnCwI9KCSFiNoc5kaD6WGMm23YJ3 R3imZMD6Ys21EE6MV8OrFLfj_qZiQBDxTzFWZhIPbq30AyXkierb47JXbXdr 04WO3ZWJVePHrfpXALcGNE.hJXv0MO1q_cspQsT7IAzprRNVV2JTIht.vxVa .X59.kx0bhbI6rcDtetEf0UzN2Qne_NIBoScUNfj5TW15ivR_LN.lSuhOS2O mohrlF.Ziz_pXxQP21AMcaUikrmNg8REq38drt3Bb_JBLSQOo2fCq5ROW.73 FxFLeyWeMXcnvTZr_p3p2YUQtMU20utCpC3ANUa_ENC7T3RTTl286qoQ_51W JwFutw2McuA1YsD0FC8Wk5a9_YW1PYapQ X-Yahoo-SMTP: h3Xqg6.swBC0yI913RMMwp94grO_cg-- Message-ID: <55764384.1020606@yahoo.com> Date: Mon, 08 Jun 2015 21:38:12 -0400 From: "pathiaki2@yahoo.com" User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: FreeBSD 10.1p10 defaultrouter not working References: <5576321B.3030506@uw.edu> In-Reply-To: <5576321B.3030506@uw.edu> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 01:41:43 -0000 It doesn't. Whether it's by design or a flaw, I've noticed this for about 5 years. route add default and everything should be fine. :-) Otherwise, a full reboot will read the /etc/rc.conf file and everything should behave as expected. P. On 06/08/2015 20:23, John Nyhuis wrote: > I am trying to set a default route of 140.142.xyz.129 using the > documented method of adding the line below to rc.conf: > > defaultrouter = "140.142.xyz.129" > > (the .xyz. is to protect the guilty... mainly me). ^_^ > > After restarting the netif and route services, I still don't see a > default route being set. > netstat -r shows: > > Internet: > Destination Gateway Flags Netif Expire > localhost link#7 UH lo0 > 140.142.xyz.128/25 link#8 U lagg0 > 140.142.xyz.141 link#8 UHS lo0 > > no default route is assigned... > No logs of interest show up in messages, security, or dmesg.today > > The pertinent section of rc.conf looks like: > > cloned_interfaces="lagg0" > defaultrouter="140.142.xyz.129" > > #create a LACP aggregate interface for the native 1G NICS > ifconfig_bce0="up" > ifconfig_bce1="up" > ifconfig_lagg0="laggproto lacp laggport bce0 laggport bce1 > 140.142.xyz.141/25" > > > This should all be good according to the FreeBSD handbook, but it does > not work. > > > I can manually set the default route using "route add default > 140.142.xyz.129", but although the route is now listed, it does not work. > > If I comment the "ifconfig_lagg0" line, a default route does show up > as expected, so this seems to be related to an incompatibility between > a aggregate interface and a "defaultrouter" line in rc.conf. Either > will work by themselves, but not both in the same rc.conf. > > > Any wisdom you would be willing to share would be much appreciated... > > > From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 07:14:17 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 05865E7B for ; Tue, 9 Jun 2015 07:14:17 +0000 (UTC) (envelope-from freebsd@qeng-ho.org) Received: from bede.qeng-ho.org (bede.qeng-ho.org [217.155.128.241]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9E36411F2 for ; Tue, 9 Jun 2015 07:14:16 +0000 (UTC) (envelope-from freebsd@qeng-ho.org) Received: from arthur.home.qeng-ho.org (arthur.home.qeng-ho.org [172.23.1.2]) by bede.home.qeng-ho.org (8.14.9/8.14.7) with ESMTP id t5972fTA046025; Tue, 9 Jun 2015 08:02:41 +0100 (BST) (envelope-from freebsd@qeng-ho.org) Message-ID: <55768F91.1030604@qeng-ho.org> Date: Tue, 09 Jun 2015 08:02:41 +0100 From: Arthur Chance User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: galtsev@kicp.uchicago.edu, che@bein.link CC: freebsd-questions@freebsd.org Subject: Re: Junk mail on list reply References: <1647612.8LsUtL0D9u@thinkpad> <61481.128.135.70.2.1433799590.squirrel@cosmo.uchicago.edu> In-Reply-To: <61481.128.135.70.2.1433799590.squirrel@cosmo.uchicago.edu> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 07:14:17 -0000 On 08/06/2015 22:39, Valeri Galtsev wrote: > > On Mon, June 8, 2015 4:22 pm, Maxim V Filimonov wrote: >> Recently, I started getting junk emails every time I reply to someone in >> any >> of the FreeBSD Mailing Lists. The messages look like the one attached. Can >> anyone do anything with that? Can I consult anyone to fix that? Why is >> that >> happening after all? > > Hi Maxim, > > from what have been discussed earlier about similar events related to > posts to this list I can say: > > 1. these apparently foreign (with respect to the list language) e-mails > appear to be auto-replies (by some likely subscribed to this list) > > 2. domain sina.com is notorious for these things (I for one consider it > rudeness to allow any auto-reply sent to mail list, as well as messages in > foreign language - at least I would never allow myself to do neither of of > these two things) > > 3. list admin(s) are more likely to be reluctant to block the whole domain > sina.com from this list (or their list server); I would respect their > decision, even though it is different from what I would do. > > The best you probably can do is to block all mail from sina.com (including > that re-sent through this list) on your end. You can be a little less draconian than that. Set your mail filters to delete any mail from sina.com with a subject line containing "自动回复", which is the common feature of these mails. (Google Translate tells me that's Chinese for "Autoreply".) -- Those who do not learn from computing history are doomed to GOTO 1 From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 07:23:39 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id A7AA8B2 for ; Tue, 9 Jun 2015 07:23:39 +0000 (UTC) (envelope-from erichsfreebsdlist@alogt.com) Received: from alogt.com (alogt.com [69.36.191.58]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 86F7514AF for ; Tue, 9 Jun 2015 07:23:39 +0000 (UTC) (envelope-from erichsfreebsdlist@alogt.com) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=alogt.com; s=default; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Subject:Cc:To:From:Date; bh=olgHOI078ZiDuSfw8YyjxanJlDEY1kKeRUHQncr+eP4=; b=maYn2B/YTpIdLNgDwa7tfrstSKgbeKSmCHiO0AzLSj+Ozb1dnWkHoB23rmureRVVXSKvQFsVDnNEO0CYTwdb09wGkMajLHk9ZB7uVRiNL8z+kqhy4Zr7gISQJNM29JaoylXfBNJ3d3GHRTQMZmPn7JxooyvIAh8shrZFD8quKgA=; Received: from [39.248.164.180] (port=35893 helo=B85M-HD3-0.alogt.com) by sl-508-2.slc.westdc.net with esmtpsa (TLSv1.2:AES128-GCM-SHA256:128) (Exim 4.85) (envelope-from ) id 1Z2Dsn-002yYP-Ga; Tue, 09 Jun 2015 01:23:38 -0600 Date: Tue, 9 Jun 2015 15:23:32 +0800 From: Erich Dollansky To: John Nyhuis Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 10.1p10 defaultrouter not working Message-ID: <20150609152332.2b6299e6@B85M-HD3-0.alogt.com> In-Reply-To: <5576321B.3030506@uw.edu> References: <5576321B.3030506@uw.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - sl-508-2.slc.westdc.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - alogt.com X-Get-Message-Sender-Via: sl-508-2.slc.westdc.net: authenticated_id: erichsfreebsdlist@alogt.com X-Source: X-Source-Args: X-Source-Dir: X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 07:23:39 -0000 Hi, On Mon, 08 Jun 2015 17:23:55 -0700 John Nyhuis wrote: > I am trying to set a default route of 140.142.xyz.129 using the > documented method of adding the line below to rc.conf: > > defaultrouter = "140.142.xyz.129" > try something like this: defaultrouter="192.168.123.210" It works for me since decades. Erich From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 07:25:26 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 126CD23A for ; Tue, 9 Jun 2015 07:25:26 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay5-d.mail.gandi.net (relay5-d.mail.gandi.net [IPv6:2001:4b98:c:538::197]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id C855814DF for ; Tue, 9 Jun 2015 07:25:25 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter31-d.gandi.net (mfilter31-d.gandi.net [217.70.178.162]) by relay5-d.mail.gandi.net (Postfix) with ESMTP id 1AC6841C078 for ; Tue, 9 Jun 2015 09:25:21 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter31-d.gandi.net Received: from relay5-d.mail.gandi.net ([217.70.183.197]) by mfilter31-d.gandi.net (mfilter31-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id g90Y6S--Rm3n for ; Tue, 9 Jun 2015 09:25:19 +0200 (CEST) X-Originating-IP: 10.58.1.145 Received: from webmail.gandi.net (unknown [10.58.1.145]) (Authenticated sender: mayuresh@kathe.in) by relay5-d.mail.gandi.net (Postfix) with ESMTPA id 6646641C097 for ; Tue, 9 Jun 2015 09:25:19 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Date: Tue, 09 Jun 2015 12:55:19 +0530 From: Mayuresh Kathe To: freebsd-questions@freebsd.org Subject: swift under =?UTF-8?Q?freebsd=3F?= Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in Message-ID: <0e0e0498667962e412d607e2f27274d0@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/0.9.5 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 07:25:26 -0000 hi, in case someone missed it, there's been an announcement that apple's swift will be open sourced soon. they are going pretty much full-out, even the libraries are going to get open sourced along with the compiler. in that case, would freebsd import support for swift within the base system in the near future? ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 07:28:39 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 3BFF92EC for ; Tue, 9 Jun 2015 07:28:39 +0000 (UTC) (envelope-from iam@ardiefox.me) Received: from out4-smtp.messagingengine.com (out4-smtp.messagingengine.com [66.111.4.28]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 063BC150C for ; Tue, 9 Jun 2015 07:28:38 +0000 (UTC) (envelope-from iam@ardiefox.me) Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailout.nyi.internal (Postfix) with ESMTP id 38BDE209B5 for ; Tue, 9 Jun 2015 03:28:37 -0400 (EDT) Received: from frontend1 ([10.202.2.160]) by compute3.internal (MEProxy); Tue, 09 Jun 2015 03:28:37 -0400 DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; d=ardiefox.me; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to:x-sasl-enc :x-sasl-enc; s=mesmtp; bh=JJl7ykAixoTo2VfktZ6MeR4w/Eo=; b=IWa/Xu lZCg2tsf3PpV1guYipMxRNZM/xzVdUhVHDUpTcnMx09fdJAjxAJ7m3Gu8S5Ahg/f pOPzdbwN74TjHeKZnmIApf5h2djMvo0mG4FkiMs3z1M1ejVRaQvrgflkFDOo9W+/ qcf0H6+FdYSIICwuVH+ikujCWbgF6vPAdFKNY= DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; d= messagingengine.com; h=cc:content-transfer-encoding:content-type :date:from:in-reply-to:message-id:mime-version:references :subject:to:x-sasl-enc:x-sasl-enc; s=smtpout; bh=JJl7ykAixoTo2Vf ktZ6MeR4w/Eo=; b=Dxzx7Nt29XaI5c/3miWyNnalydo0r890h+qxa7BK8fB/vPB RGvUZFuMvllHI9SbmScjy6InFdA3yj024rI5nieIDydmUDm1xvIab4knKJryw4+U WM0MrVmAx+cegvqdsWAl7tP3xCN3KcDFnCGOgzIGBKVROGmdbMFS8JuPwZA0= X-Sasl-enc: KwPe/DMBd+I3JSeqKqrdqMx7FHmR/MYPwakyB2zZ3Qlt 1433834915 Received: from [192.168.1.100] (unknown [175.253.176.216]) by mail.messagingengine.com (Postfix) with ESMTPA id DA5ADC00019; Tue, 9 Jun 2015 03:28:35 -0400 (EDT) References: <0e0e0498667962e412d607e2f27274d0@kathe.in> Mime-Version: 1.0 (1.0) In-Reply-To: <0e0e0498667962e412d607e2f27274d0@kathe.in> Content-Type: multipart/signed; micalg=sha1; boundary=Apple-Mail-C39F5C6F-D047-4DEA-9158-2B7BDFFA2532; protocol="application/pkcs7-signature" Content-Transfer-Encoding: 7bit Message-Id: <44B305FD-4EDD-44B2-94FB-3B5B22BF74E3@ardiefox.me> Cc: "freebsd-questions@freebsd.org" X-Mailer: iPhone Mail (12F70) From: "Ardie H. Hwang" Subject: Re: swift under freebsd? Date: Tue, 9 Jun 2015 16:28:31 +0900 To: "mayuresh@kathe.in" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 07:28:39 -0000 --Apple-Mail-C39F5C6F-D047-4DEA-9158-2B7BDFFA2532 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable That would be something hard to imagine. Even Perl is in Ports tree, not bas= e system. But it would be surely good to have Swift support in FreeBSD. :) -- Ardie H. Hwang ---------------- email: iam@ardiefox.me mobile: +82-10-I-AM-ARDIE > On Jun 9, 2015, at 16:25, Mayuresh Kathe wrote: >=20 > hi, in case someone missed it, there's been an announcement that apple's s= wift will be open sourced soon. > they are going pretty much full-out, even the libraries are going to get o= pen sourced along with the compiler. > in that case, would freebsd import support for swift within the base syste= m in the near future? >=20 > ~mayuresh >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.or= g" --Apple-Mail-C39F5C6F-D047-4DEA-9158-2B7BDFFA2532 Content-Type: application/pkcs7-signature; name=smime.p7s Content-Disposition: attachment; filename=smime.p7s Content-Transfer-Encoding: base64 MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIUJDCCBhsw ggUDoAMCAQICAw2NljANBgkqhkiG9w0BAQsFADCBjDELMAkGA1UEBhMCSUwxFjAUBgNVBAoTDVN0 YXJ0Q29tIEx0ZC4xKzApBgNVBAsTIlNlY3VyZSBEaWdpdGFsIENlcnRpZmljYXRlIFNpZ25pbmcx ODA2BgNVBAMTL1N0YXJ0Q29tIENsYXNzIDEgUHJpbWFyeSBJbnRlcm1lZGlhdGUgQ2xpZW50IENB MB4XDTE1MDQwMTA1MTUyMFoXDTE2MDQwMTE0NTMxMFowOjEYMBYGA1UEAwwPaWFtQGFyZGllZm94 Lm1lMR4wHAYJKoZIhvcNAQkBFg9pYW1AYXJkaWVmb3gubWUwggEiMA0GCSqGSIb3DQEBAQUAA4IB DwAwggEKAoIBAQDX7DM3FaYKaYp2sZObkwoql9SJpe2gQI2I0eJM7fB7UokCnaNeiz7Leptzu/jw Ug6mes6NhsbSFrsMQuV/fBQVSA8SqX2yPVfvhL3iwgk7ZU2C7i8E5h0qQJ0bjNRmasZ7brEd2PJT lN2O0Qbrm7DLBd3bXLUkPbBXC3/mRIZB6Oube+kx3a4WBeY8exUSOncM89d/GM0a+/8Rq/WO/ZtW 7E/iys1/Qh2EcDwZjVXnisvu9F2neu/TqsJQnqq56UID7v4z5YgRMUmFhc6ZZmB7yxDk7/lCqN69 c+65BxfB4bN8J9NbzjXPXCOnK+P+oqlS2FZUVmM/qZ90jbMogaevAgMBAAGjggLVMIIC0TAJBgNV HRMEAjAAMAsGA1UdDwQEAwIEsDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwQwHQYDVR0O BBYEFBiFrFodtqd6r7GQvkE2WpB+wDCeMB8GA1UdIwQYMBaAFFNy7ZKc4NrLAVx8fpY1TvLUuFGC MBoGA1UdEQQTMBGBD2lhbUBhcmRpZWZveC5tZTCCAUwGA1UdIASCAUMwggE/MIIBOwYLKwYBBAGB tTcBAgMwggEqMC4GCCsGAQUFBwIBFiJodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9wb2xpY3kucGRm MIH3BggrBgEFBQcCAjCB6jAnFiBTdGFydENvbSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTADAgEB GoG+VGhpcyBjZXJ0aWZpY2F0ZSB3YXMgaXNzdWVkIGFjY29yZGluZyB0byB0aGUgQ2xhc3MgMSBW YWxpZGF0aW9uIHJlcXVpcmVtZW50cyBvZiB0aGUgU3RhcnRDb20gQ0EgcG9saWN5LCByZWxpYW5j ZSBvbmx5IGZvciB0aGUgaW50ZW5kZWQgcHVycG9zZSBpbiBjb21wbGlhbmNlIG9mIHRoZSByZWx5 aW5nIHBhcnR5IG9ibGlnYXRpb25zLjA2BgNVHR8ELzAtMCugKaAnhiVodHRwOi8vY3JsLnN0YXJ0 c3NsLmNvbS9jcnR1MS1jcmwuY3JsMIGOBggrBgEFBQcBAQSBgTB/MDkGCCsGAQUFBzABhi1odHRw Oi8vb2NzcC5zdGFydHNzbC5jb20vc3ViL2NsYXNzMS9jbGllbnQvY2EwQgYIKwYBBQUHMAKGNmh0 dHA6Ly9haWEuc3RhcnRzc2wuY29tL2NlcnRzL3N1Yi5jbGFzczEuY2xpZW50LmNhLmNydDAjBgNV HRIEHDAahhhodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS8wDQYJKoZIhvcNAQELBQADggEBAMIHq7HX hVQpsH5Q9+BgZljuCaFAwm/igjNnESRKCAmxMEAQjfUiwzE8/XVHRqL3o87ANvhL/7l9Dif8enFI GkAm5DwL6GyR9BY7hqrky+NJ+fmoiOi/hPzP4JlRetxosyoJxWilZI3OO9daNdRKWWeeJP5bCMWa b48rKGVss9FpeY/lXuznjcYv5FHbJE6j4dKLjncZ0JPWSMFwjbKH5sduHKBqiGl+E8Pzmtz/nLsj cdOc8U49tDaxq5ns96p+l3FVfwTNBKB2D1PnPL5mynU8FDR3WGmwjcL+RTVq7ybPi14AIBCOZ6LP bOGgZNpLG/LakYN3zIbXRZ5j9Jx1/QYwggY0MIIEHKADAgECAgEeMA0GCSqGSIb3DQEBBQUAMH0x CzAJBgNVBAYTAklMMRYwFAYDVQQKEw1TdGFydENvbSBMdGQuMSswKQYDVQQLEyJTZWN1cmUgRGln aXRhbCBDZXJ0aWZpY2F0ZSBTaWduaW5nMSkwJwYDVQQDEyBTdGFydENvbSBDZXJ0aWZpY2F0aW9u IEF1dGhvcml0eTAeFw0wNzEwMjQyMTAxNTVaFw0xNzEwMjQyMTAxNTVaMIGMMQswCQYDVQQGEwJJ TDEWMBQGA1UEChMNU3RhcnRDb20gTHRkLjErMCkGA1UECxMiU2VjdXJlIERpZ2l0YWwgQ2VydGlm aWNhdGUgU2lnbmluZzE4MDYGA1UEAxMvU3RhcnRDb20gQ2xhc3MgMSBQcmltYXJ5IEludGVybWVk aWF0ZSBDbGllbnQgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDHCYPMzi3YGrEp pC4Tq5a+ijKDjKaIQZZVR63UbxIP6uq/I0fhCu+cQhoUfE6ERKKnu8zPf1Jwuk0tsvVCk6U9b+0U jM0dLep3ZdE1gblK/1FwYT5Pipsu2yOMluLqwvsuz9/9f1+1PKHG/FaR/wpbfuIqu54qzHDYeqiU fsYzoVflR80DAC7hmJ+SmZnNTWyUGHJbBpA8Q89lGxahNvuryGaC/o2/ceD2uYDX9U8Eg5DpIpGQ dcbQeGarV04WgAUjjXX5r/2dabmtxWMZwhZna//jdiSyrrSMTGKkDiXm6/3/4ebfeZuCYKzN2P8O 2F/Xe2AC/Y7zeEsnR7FOp+uXAgMBAAGjggGtMIIBqTAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB /wQEAwIBBjAdBgNVHQ4EFgQUU3Ltkpzg2ssBXHx+ljVO8tS4UYIwHwYDVR0jBBgwFoAUTgvvGqRA W6UXaYcwyjRoQ9BBrvIwZgYIKwYBBQUHAQEEWjBYMCcGCCsGAQUFBzABhhtodHRwOi8vb2NzcC5z dGFydHNzbC5jb20vY2EwLQYIKwYBBQUHMAKGIWh0dHA6Ly93d3cuc3RhcnRzc2wuY29tL3Nmc2Nh LmNydDBbBgNVHR8EVDBSMCegJaAjhiFodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9zZnNjYS5jcmww J6AloCOGIWh0dHA6Ly9jcmwuc3RhcnRzc2wuY29tL3Nmc2NhLmNybDCBgAYDVR0gBHkwdzB1Bgsr BgEEAYG1NwECATBmMC4GCCsGAQUFBwIBFiJodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9wb2xpY3ku cGRmMDQGCCsGAQUFBwIBFihodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9pbnRlcm1lZGlhdGUucGRm MA0GCSqGSIb3DQEBBQUAA4ICAQAKgwh9eKssBly4Y4xerhy5I3dNoXHYfYa8PlVLL/qtXnkFgdtY 1o95CfegFJTwqBBmf8pyTUnFsukDFUI22zF5bVHzuJ+GxhnSqN2sD1qetbYwBYK2iyYA5Pg7Er1A +hKMIzEzcduRkIMmCeUTyMyikfbUFvIBivtvkR8ZFAk22BZy+pJfAoedO61HTz4qSfQoCRcLN5A0 t4DkuVhTMXIzuQ8CnykhExD6x4e6ebIbrjZLb7L+ocR0y4YjCl/Pd4MXU91y0vTipgr/O75CDUHD RHCCKBVmz/Rzkc/b970MEeHt5LC3NiWTgBSvrLEuVzBKM586YoRD9Dy3OHQgWI270g+5MYA8GfgI /EPT5G7xPbCDz+zjdH89PeR3U4So4lSXur6H6vp+m9TQXPF3a0LwZrp8MQ+Z77U1uL7TelWO5lAp sbAonrqASfTpaprFVkL4nyGH+NHST2ZJPWIBk81i6Vw0ny0qZW2Niy/QvVNKbb43A43ny076khXO 7cNbBIRdJ/6qQNq9Bqb5C0Q5nEsFcj75oxQRqlKf6TcvGbjxkJh8BYtv9ePsXklAxtm8J7GCUBth HSQgepbkOexhJ0wP8imUkyiPHQ0GvEnd83129fZjoEhdGwXV27ioRKbj/cIq7JRXun0NbeY+UdMY u9jGfIpDLtUUGSgsg2zMGs5R4jCCB8kwggWxoAMCAQICAQEwDQYJKoZIhvcNAQEFBQAwfTELMAkG A1UEBhMCSUwxFjAUBgNVBAoTDVN0YXJ0Q29tIEx0ZC4xKzApBgNVBAsTIlNlY3VyZSBEaWdpdGFs IENlcnRpZmljYXRlIFNpZ25pbmcxKTAnBgNVBAMTIFN0YXJ0Q29tIENlcnRpZmljYXRpb24gQXV0 aG9yaXR5MB4XDTA2MDkxNzE5NDYzNloXDTM2MDkxNzE5NDYzNlowfTELMAkGA1UEBhMCSUwxFjAU BgNVBAoTDVN0YXJ0Q29tIEx0ZC4xKzApBgNVBAsTIlNlY3VyZSBEaWdpdGFsIENlcnRpZmljYXRl IFNpZ25pbmcxKTAnBgNVBAMTIFN0YXJ0Q29tIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIICIjAN BgkqhkiG9w0BAQEFAAOCAg8AMIICCgKCAgEAwYjbCbxsRnx4n5V7tTOQ8nJi1sE2ICIkXs7pd/JD CqIGZKTMjjb4OOYj8G5tsTzdcqOFHKHTPbQzK9Mvr/7qsEFZZ7bEBn0KnnSF1nlMgDd63zkFUln3 9BtGQ6TShYXSw3HzdWI0uiyKfx6P7u000BHHls1SPboz1t1N3gs7SkufwiYv+rUWHHI1d8o8XebK 4SaLGjZ2XAHbdBQl/u21oIgP3XjKLR8HlzABLXJ5+kbWEyqouaarg0kd5fLv3eQBjhgKj2NTFoVi qQ4ZOsy1ZqbCa3QH5Cvhdj60bdj2ROFzYh87xL6gU1YlbFEJ96qryr92/W2b853bvz1mvAxWqq+Y SJU6S9+nWFDZOHWpW+pDDAL/mevobE1wWyllnN2qXcyvATHsDOvSjejqnHvmbvcnZgwaSNduQuM/ 3iE+e+ENcPtjqqhsGlS0XCV6yaLJixamuyx+F14FTVhuEh0B7hIQDcYyfxj//PT6zW6R6DZJvhpI aYvClk0aErJpF8EKkNb6eSJIv7p7afhwx/p6N9jYDdJ2T1f/kLfjkdLd78Jgt2c63f6qnPDUi39y Is7Gn5e2+K+KoBCo2fsYxra1XFI8ibYZKnMBCg8DsxJg8novgdujbv8mMJf1i92JV7atPbOvK8W3 dgLwpdYrmoYUKnL24zOMXQlLE9+7jHQTUksCAwEAAaOCAlIwggJOMAwGA1UdEwQFMAMBAf8wCwYD VR0PBAQDAgGuMB0GA1UdDgQWBBROC+8apEBbpRdphzDKNGhD0EGu8jBkBgNVHR8EXTBbMCygKqAo hiZodHRwOi8vY2VydC5zdGFydGNvbS5vcmcvc2ZzY2EtY3JsLmNybDAroCmgJ4YlaHR0cDovL2Ny bC5zdGFydGNvbS5vcmcvc2ZzY2EtY3JsLmNybDCCAV0GA1UdIASCAVQwggFQMIIBTAYLKwYBBAGB tTcBAQEwggE7MC8GCCsGAQUFBwIBFiNodHRwOi8vY2VydC5zdGFydGNvbS5vcmcvcG9saWN5LnBk ZjA1BggrBgEFBQcCARYpaHR0cDovL2NlcnQuc3RhcnRjb20ub3JnL2ludGVybWVkaWF0ZS5wZGYw gdAGCCsGAQUFBwICMIHDMCcWIFN0YXJ0IENvbW1lcmNpYWwgKFN0YXJ0Q29tKSBMdGQuMAMCAQEa gZdMaW1pdGVkIExpYWJpbGl0eSwgcmVhZCB0aGUgc2VjdGlvbiAqTGVnYWwgTGltaXRhdGlvbnMq IG9mIHRoZSBTdGFydENvbSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSBQb2xpY3kgYXZhaWxhYmxl IGF0IGh0dHA6Ly9jZXJ0LnN0YXJ0Y29tLm9yZy9wb2xpY3kucGRmMBEGCWCGSAGG+EIBAQQEAwIA BzA4BglghkgBhvhCAQ0EKxYpU3RhcnRDb20gRnJlZSBTU0wgQ2VydGlmaWNhdGlvbiBBdXRob3Jp dHkwDQYJKoZIhvcNAQEFBQADggIBABZsmfRmDDT10IVefQrs2hBOOBxe36YlBUuRMsHoO/E93UQJ WwdJiinLZgK3sZr3JZgJPI4b4d02hytLu2jTOWY9oCbH8jmRHVGrgnt+1c5a5OIDV3Bplwj5Xlim Ct+MBppFFhY4Cl5X9mLHegIF5rwetfKe9Kkpg/iyFONuKIdEw5Aa3jipPKxDTWRFzt0oqVzyc3sE +Bfoq7HzLlxkbnMxOhK4vLMR5H2PgVGaO42J9E2TZns8A+3Tmh2a82VQ9aDQdZ8vr/DqgkOY+Gmc iXnEQ45GcuNkNhKv9yUeOImQd37Da2q5w8tES6x4kIvnxyweSxFEyDRSJ80KXZ+FwYnVGnjylRBT Mt2AhGZ12bVoKPthLr6EqDjAmRKGpR5nZK0GLi+pcIXHlg98iWX1jkNUDqvdpYA5lGDANMmWcCyj EvUfSHu9HH5rt52Q9CI7rvj8Ksr6glKg769LVZPrwbXwIousNE4mIgShhyx1SrflfRPXuAxkwDbS yS+GEowjCcEbgjtzSaNqV4eU5dZ4xZlDY+NN4Hct4WWZcmkEGkcJ5g8BViT7H78OealYLrnECQF+ lbptAAY+supKEDnY0Cv1v+x1v5cCxQkbCNxVN+KB+zeEQ2IgyudWS2Xq/mzBJJMkoTTrBf+aIq6b fT/xZVEKpjBqs/SIHIAN/HKK6INeMYIDbzCCA2sCAQEwgZQwgYwxCzAJBgNVBAYTAklMMRYwFAYD VQQKEw1TdGFydENvbSBMdGQuMSswKQYDVQQLEyJTZWN1cmUgRGlnaXRhbCBDZXJ0aWZpY2F0ZSBT aWduaW5nMTgwNgYDVQQDEy9TdGFydENvbSBDbGFzcyAxIFByaW1hcnkgSW50ZXJtZWRpYXRlIENs aWVudCBDQQIDDY2WMAkGBSsOAwIaBQCgggGvMBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJ KoZIhvcNAQkFMQ8XDTE1MDYwOTA3MjgzMVowIwYJKoZIhvcNAQkEMRYEFOTFCW3IO87QGvZuaVXF JnJN9wseMIGlBgkrBgEEAYI3EAQxgZcwgZQwgYwxCzAJBgNVBAYTAklMMRYwFAYDVQQKEw1TdGFy dENvbSBMdGQuMSswKQYDVQQLEyJTZWN1cmUgRGlnaXRhbCBDZXJ0aWZpY2F0ZSBTaWduaW5nMTgw NgYDVQQDEy9TdGFydENvbSBDbGFzcyAxIFByaW1hcnkgSW50ZXJtZWRpYXRlIENsaWVudCBDQQID DY2WMIGnBgsqhkiG9w0BCRACCzGBl6CBlDCBjDELMAkGA1UEBhMCSUwxFjAUBgNVBAoTDVN0YXJ0 Q29tIEx0ZC4xKzApBgNVBAsTIlNlY3VyZSBEaWdpdGFsIENlcnRpZmljYXRlIFNpZ25pbmcxODA2 BgNVBAMTL1N0YXJ0Q29tIENsYXNzIDEgUHJpbWFyeSBJbnRlcm1lZGlhdGUgQ2xpZW50IENBAgMN jZYwDQYJKoZIhvcNAQEBBQAEggEABI1s2+OVwXKsOPMLAI5/7pbUWDK/UC8jxy/LjQiaddCr2B0S WqNv6BNVoSe8Xc+FXhZG16q7hQEsZnVj3DCn9eHDYJAqhHlTX0qy33H4BeiBIbBNR5PkQKNIjUOQ sCwLmHfv9Cs1dKcoLn9WDQ+nR4b5+bPENM790uskOCUxaZgup0i7kSmxbZj5a7i0wXNzRAxDknNb BAkUCBLKV3dI726qECNzxqTS+eJTPnaV/usVpXh8tR72P5WA65onXRFi014cqQ/2cl1tL0bE1Zic nT54AB7Do+T0KuxuSkB3Oh9c8dd6Z3xFX/bENOyRzh6TXFTV4hBRP4lzZNyeFk8cNAAAAAAAAA== --Apple-Mail-C39F5C6F-D047-4DEA-9158-2B7BDFFA2532-- From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 07:41:25 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D5E5C42A for ; Tue, 9 Jun 2015 07:41:25 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:c:538::195]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 994A71836 for ; Tue, 9 Jun 2015 07:41:25 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter37-d.gandi.net (mfilter37-d.gandi.net [217.70.178.168]) by relay3-d.mail.gandi.net (Postfix) with ESMTP id 2C9EAA8107; Tue, 9 Jun 2015 09:41:24 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter37-d.gandi.net Received: from relay3-d.mail.gandi.net ([217.70.183.195]) by mfilter37-d.gandi.net (mfilter37-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id ftpeEbGGCrcX; Tue, 9 Jun 2015 09:41:22 +0200 (CEST) X-Originating-IP: 10.58.1.145 Received: from webmail.gandi.net (unknown [10.58.1.145]) (Authenticated sender: mayuresh@kathe.in) by relay3-d.mail.gandi.net (Postfix) with ESMTPA id 95992A810F; Tue, 9 Jun 2015 09:41:22 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Date: Tue, 09 Jun 2015 13:11:22 +0530 From: Mayuresh Kathe To: "Ardie H. Hwang" Cc: freebsd-questions@freebsd.org Subject: Re: swift under =?UTF-8?Q?freebsd=3F?= Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: <44B305FD-4EDD-44B2-94FB-3B5B22BF74E3@ardiefox.me> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> <44B305FD-4EDD-44B2-94FB-3B5B22BF74E3@ardiefox.me> Message-ID: <1cb1ec31f33e6936aa2ac3991ad6f8a3@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/0.9.5 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 07:41:25 -0000 not too hard to imagine i would say, especially considering the fact that there's an objective-c compiler already bundled with the base install. :) the libraries could probably be part of the ports tree though. ;) it was fun to play with objective-c, but from the looks of it, swift would be a pleasure to work with. :) ~mayuresh On 2015-06-09 12:58, Ardie H. Hwang wrote: > That would be something hard to imagine. Even Perl is in Ports tree, > not base system. > But it would be surely good to have Swift support in FreeBSD. :) > > -- > Ardie H. Hwang > ---------------- > email: iam@ardiefox.me > mobile: +82-10-I-AM-ARDIE > >> On Jun 9, 2015, at 16:25, Mayuresh Kathe wrote: >> >> hi, in case someone missed it, there's been an announcement that >> apple's swift will be open sourced soon. >> they are going pretty much full-out, even the libraries are going to >> get open sourced along with the compiler. >> in that case, would freebsd import support for swift within the base >> system in the near future? >> >> ~mayuresh >> >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 10:39:41 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B21A077D for ; Tue, 9 Jun 2015 10:39:41 +0000 (UTC) (envelope-from rsk@gsp.org) Received: from taos.firemountain.net (taos.firemountain.net [207.114.3.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "taos.firemountain.net", Issuer "taos.firemountain.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 79792133D for ; Tue, 9 Jun 2015 10:39:41 +0000 (UTC) (envelope-from rsk@gsp.org) Received: from gsp.org (localhost [127.0.0.1]) by taos.firemountain.net (8.15.1/8.14.9) with SMTP id t59ACqeM012255 for ; Tue, 9 Jun 2015 06:12:53 -0400 (EDT) Date: Tue, 9 Jun 2015 06:12:52 -0400 From: Rich Kulawiec To: freebsd-questions@freebsd.org Subject: Re: Junk mail on list reply Message-ID: <20150609101252.GA18825@gsp.org> References: <1647612.8LsUtL0D9u@thinkpad> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1647612.8LsUtL0D9u@thinkpad> User-Agent: Mutt/1.5.21 (2010-09-15) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 10:39:41 -0000 On Tue, Jun 09, 2015 at 12:22:18AM +0300, Maxim V Filimonov wrote: > Recently, I started getting junk emails every time I reply to someone in any > of the FreeBSD Mailing Lists. The messages look like the one attached. Can > anyone do anything with that? Can I consult anyone to fix that? Why is that > happening after all? This is happening because someone has a broken auto-responder that (a) responds to bulk traffic, i.e., mailing list traffic and (b) responds back to the person sending traffic to the mailing list. This list's headers indicate that the way to reach the human(s) behind it is to contact: owner-freebsd-questions@freebsd.org This list's main information page indicates that it's: freebsd-questions-owner@freebsd.org (To explain: both variations are common. I support both on the lists that I manage because the first one matches RFC 2142 and the second one is parallel to freebsd-questions-request@freebsd.org, which is the address used to interact with Mailman. The general rule is that -request usually goes to a program while -owner goes to people.) Therefore, I would forward a copy of the response to one of those addresses (probably the latter), with an explanation, and request the removal of the address causing the problem. Most people who run mailing lists will either warn and/or remove subscribed addresses that do this, because it's clearly abusive. ---rsk From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 11:38:38 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 03785997 for ; Tue, 9 Jun 2015 11:38:38 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a115.g.dreamhost.com (sub5.mail.dreamhost.com [208.113.200.129]) by mx1.freebsd.org (Postfix) with ESMTP id DAAC71247 for ; Tue, 9 Jun 2015 11:38:37 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a115.g.dreamhost.com (localhost [127.0.0.1]) by homiemail-a115.g.dreamhost.com (Postfix) with ESMTP id 406CA4E5E; Tue, 9 Jun 2015 04:38:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=ozzmosis.com; h=date:from :to:cc:subject:message-id:references:mime-version:content-type :in-reply-to; s=ozzmosis.com; bh=sQCn7w8RS3+8xwdxRoIGdkHhCeA=; b= MAYg7OsGhpYyzYerG0ka12z/rcZMaCO95yP4qa0OTBQuG8VOfeh1fyHorCDp31ZE xtt11uNwFBf58V/KAu4gzzpsmxBNzu9ScbVEgselBkXlx1/wRVTO7yhLd0sMIwqX X0kMMoMvmvAPVkpuIvESZvvkjsqKVMeB9UnDLvyK4cY= Received: from blizzard.ozzmosis.com (114-198-63-194.dyn.iinet.net.au [114.198.63.194]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: relay@ozzmosis.com) by homiemail-a115.g.dreamhost.com (Postfix) with ESMTPSA id E12344E59; Tue, 9 Jun 2015 04:38:30 -0700 (PDT) Received: by blizzard.ozzmosis.com (Postfix, from userid 1001) id 0964BF10; Tue, 9 Jun 2015 21:38:28 +1000 (AEST) Date: Tue, 9 Jun 2015 21:38:27 +1000 From: andrew clarke To: mayuresh@kathe.in Cc: freebsd-questions@freebsd.org Subject: Re: swift under freebsd? Message-ID: <20150609113827.GA80013@ozzmosis.com> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <0e0e0498667962e412d607e2f27274d0@kathe.in> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 11:38:38 -0000 On Tue 2015-06-09 12:55:19 UTC+0530, Mayuresh Kathe (mayuresh@kathe.in) wrote: > hi, in case someone missed it, there's been an announcement that apple's > swift will be open sourced soon. > they are going pretty much full-out, even the libraries are going to get > open sourced along with the compiler. > in that case, would freebsd import support for swift within the base > system in the near future? I think it would only end up in the FreeBSD base system if a particular program in base required it. However the general trend over the years has been to remove dependencies from base (Perl, Ruby) rather than add more. ObjC support is in base more by coincidence, because clang is required to build the base system in FreeBSD 10.0 and newer, and clang includes ObjC support. clang will never build Swift apps, though. Given that Swift is built on top of LLVM (which clang uses), it should hopefully be fairly trivial to port to FreeBSD, and I'd expect it to appear in the Ports tree sooner or later. But not in base. From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 19:31:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B6DBACC7 for ; Tue, 9 Jun 2015 19:31:10 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id 5933F1A74 for ; Tue, 9 Jun 2015 19:31:09 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t59JN15O031321 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Tue, 9 Jun 2015 20:23:04 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <55773D18.3060804@ifdnrg.com> Date: Tue, 09 Jun 2015 20:23:04 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: r220's with serial Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 19:31:10 -0000 has anyone managed to get serial console access working under dell r220's. -All below under bios boot, as opposed to uefi, (which i can't use anyway as usb installer doesn't support ZFS on boot) tried under both ZFS boot and traditional UFS setup. I see: - with bios redirection after boot on (which i have on all other working non r220 prior boxes) -broken boot menu which gets kicked out to an usuable loader prompt, if you catch it quick it'll boot, (i suspect there's some unwanted output from the dell serial output) - when bios redirection after boot is disabled box does boot ok under serial but i can't get a vt100 terminal login with same settings as i have workign on all other boxes. thanks Paul. -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 19:37:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D7A23E0E for ; Tue, 9 Jun 2015 19:37:10 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id 77E661C14 for ; Tue, 9 Jun 2015 19:37:09 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t59Jb3Ex039037 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Tue, 9 Jun 2015 20:37:04 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <55774063.4050306@ifdnrg.com> Date: Tue, 09 Jun 2015 20:37:07 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: r220's with serial References: <55773D18.3060804@ifdnrg.com> In-Reply-To: <55773D18.3060804@ifdnrg.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 19:37:10 -0000 On 09/06/2015 20:23, Paul Macdonald wrote: > > has anyone managed to get serial console access working under dell > r220's. > > -All below under bios boot, as opposed to uefi, (which i can't use > anyway as usb installer doesn't support ZFS on boot) > > tried under both ZFS boot and traditional UFS setup. > > I see: > - with bios redirection after boot on (which i have on all > other working non r220 prior boxes) > -broken boot menu which gets kicked out to an > usuable loader prompt, if you catch it quick it'll boot, > (i suspect there's some unwanted output from > the dell serial output) > > - when bios redirection after boot is disabled box does boot > ok under serial but i can't get a vt100 terminal login with same > settings as i have workign on all other boxes. > > thanks > Paul. > > given most of the above is fixed by turning off bios redirection after boot, a potentially better question is why do i not get a login prompt after boot? neither: ttyu0 "/usr/libexec/getty std.57600" vt100 onifconsole secure ttyu0 "/usr/libexec/getty std.57600" vt100 on secure give a login prompt. getty on ttyu0 is running root 766 0.0 0.0 14488 2120 - I 10:31PM 0:00.00 /usr/libexec/getty std.57600 ttyu0 root 758 0.0 0.0 14488 1984 v0 Is+ 10:31PM 0:00.00 /usr/libexec/getty Pc ttyv0 Paul. > > -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 20:18:41 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 2993345E for ; Tue, 9 Jun 2015 20:18:41 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id CDB83160C for ; Tue, 9 Jun 2015 20:18:40 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t59KIUrv062408 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Tue, 9 Jun 2015 21:18:34 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <55774A1A.6030600@ifdnrg.com> Date: Tue, 09 Jun 2015 21:18:34 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: r220's with serial References: <55773D18.3060804@ifdnrg.com> <55774063.4050306@ifdnrg.com> In-Reply-To: <55774063.4050306@ifdnrg.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 20:18:41 -0000 uart0 not seen in dmesg which i think is def related: /var/log/messages Jun 9 22:59:31 asd getty[796]: open /dev/ttyu0: No such file or directory (tried disabling ttyu0 and only having ttyu1 but no luck) #ttyu0 "/usr/libexec/getty std.57600" vt100 onifconsole secure ttyu1 "/usr/libexec/getty std.57600" vt100 onifconsole secure *dmesg:** * uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Whereas on a currently working serial system i see uart 0 and 1 ///uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0// // uart0: console (57600,n,8,1)//// // uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0// / is this just a serial port driver issue on com1? (altho i see all serial stuff till login) help! -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Tue Jun 9 20:51:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id EDDD375F for ; Tue, 9 Jun 2015 20:51:10 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id 8D3841E08 for ; Tue, 9 Jun 2015 20:51:09 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t59Kp1IX083083 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Tue, 9 Jun 2015 21:51:03 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <557751B9.3080706@ifdnrg.com> Date: Tue, 09 Jun 2015 21:51:05 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: r220's with serial References: <55773D18.3060804@ifdnrg.com> <55774063.4050306@ifdnrg.com> <55774A1A.6030600@ifdnrg.com> In-Reply-To: <55774A1A.6030600@ifdnrg.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jun 2015 20:51:11 -0000 On 09/06/2015 21:18, Paul Macdonald wrote: > > uart0 not seen in dmesg which i think is def related: > Is the issue is a lack of a an appropriate serial driver in 10.1 for dell r220's? (serial is fine till OS boot and login should be shown) -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 11:49:58 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C2B7CDE7 for ; Wed, 10 Jun 2015 11:49:58 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp5.hushmail.com (smtp5.hushmail.com [65.39.178.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id AB31D15F3 for ; Wed, 10 Jun 2015 11:49:58 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp5.hushmail.com (localhost [127.0.0.1]) by smtp5.hushmail.com (Postfix) with SMTP id D929B601E8 for ; Wed, 10 Jun 2015 11:11:35 +0000 (UTC) Received: from smtp.hushmail.com (w6.hushmail.com [65.39.178.92]) by smtp5.hushmail.com (Postfix) with ESMTP for ; Wed, 10 Jun 2015 11:11:35 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id C81EE2319B; Wed, 10 Jun 2015 11:11:35 +0000 (UTC) MIME-Version: 1.0 Date: Wed, 10 Jun 2015 11:11:35 +0000 To: freebsd-questions@freebsd.org Subject: FreeBSD and Docker From: opendaddy@hushmail.com Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150610111135.C81EE2319B@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 11:49:58 -0000 Hi! Attempting to install the Discourse discussion forum (https://github.com/discourse/discourse) on my DigitalOcean FreeBSD VPS. Discourse requires Docker, however nothing happens when I try `wget -qO- https://get.docker.com/ | sh` (https://github.com/discourse/discourse/blob/master/docs/INSTALL-cloud.md). What am I doing wrong? Thanks! O.D. From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 11:59:03 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 18EA7F44 for ; Wed, 10 Jun 2015 11:59:03 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:c:538::195]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id CF1FB1846 for ; Wed, 10 Jun 2015 11:59:01 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter18-d.gandi.net (mfilter18-d.gandi.net [217.70.178.146]) by relay3-d.mail.gandi.net (Postfix) with ESMTP id 064A7A80B9 for ; Wed, 10 Jun 2015 13:58:58 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter18-d.gandi.net Received: from relay3-d.mail.gandi.net ([217.70.183.195]) by mfilter18-d.gandi.net (mfilter18-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id JjPtncZ6dYbe for ; Wed, 10 Jun 2015 13:58:56 +0200 (CEST) X-Originating-IP: 10.58.1.144 Received: from webmail.gandi.net (unknown [10.58.1.144]) (Authenticated sender: mayuresh@kathe.in) by relay3-d.mail.gandi.net (Postfix) with ESMTPA id 93C9CA80AB for ; Wed, 10 Jun 2015 13:58:56 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Date: Wed, 10 Jun 2015 17:28:56 +0530 From: Mayuresh Kathe To: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: <20150610111135.C81EE2319B@smtp.hushmail.com> References: <20150610111135.C81EE2319B@smtp.hushmail.com> Message-ID: <74b05bc6a0e5606ffe29b9a0230b1e86@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/0.9.5 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 11:59:03 -0000 On 2015-06-10 16:41, opendaddy@hushmail.com wrote: > Hi! > > Attempting to install the Discourse discussion forum > (https://github.com/discourse/discourse) on my DigitalOcean FreeBSD > VPS. Discourse requires Docker, however nothing happens when I try > `wget -qO- https://get.docker.com/ | sh` > (https://github.com/discourse/discourse/blob/master/docs/INSTALL-cloud.md). > > What am I doing wrong? did you try getting that file first? as it is! maybe you could issue; wget https://get.docker.com/ once downloaded, try running the file; sh ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 13:13:26 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 46471C10 for ; Wed, 10 Jun 2015 13:13:26 +0000 (UTC) (envelope-from joe.shevland@hushmail.com) Received: from smtp5.hushmail.com (smtp5.hushmail.com [65.39.178.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 2E1FE1EF1 for ; Wed, 10 Jun 2015 13:13:25 +0000 (UTC) (envelope-from joe.shevland@hushmail.com) Received: from smtp5.hushmail.com (localhost [127.0.0.1]) by smtp5.hushmail.com (Postfix) with SMTP id 067DA601EA for ; Wed, 10 Jun 2015 13:13:25 +0000 (UTC) Received: from smtp.hushmail.com (w3.hushmail.com [65.39.178.62]) by smtp5.hushmail.com (Postfix) with ESMTP for ; Wed, 10 Jun 2015 13:13:24 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id E7AD3C04C8; Wed, 10 Jun 2015 13:13:24 +0000 (UTC) MIME-Version: 1.0 Date: Wed, 10 Jun 2015 23:13:24 +1000 To: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker From: "Joe Shevland" In-Reply-To: <20150610111135.C81EE2319B@smtp.hushmail.com> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150610131324.E7AD3C04C8@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 13:13:26 -0000 Postgres, Redis and Ruby are available though, so I don't think it'd be impossible to get the RoR side of things working for Discourse. On 10/6/2015 at 9:50 PM, opendaddy@hushmail.com wrote: > >Hi! > >Attempting to install the Discourse discussion forum >(https://github.com/discourse/discourse) on my DigitalOcean >FreeBSD VPS. Discourse requires Docker, however nothing happens >when I try `wget -qO- https://get.docker.com/ | sh` >(https://github.com/discourse/discourse/blob/master/docs/INSTALL- >cloud.md). > >What am I doing wrong? > >Thanks! > >O.D. > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions- >unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 13:39:58 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 2A44B5EB for ; Wed, 10 Jun 2015 13:39:58 +0000 (UTC) (envelope-from joe.shevland@hushmail.com) Received: from smtp3.hushmail.com (smtp3.hushmail.com [65.39.178.200]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 121D616ED for ; Wed, 10 Jun 2015 13:39:57 +0000 (UTC) (envelope-from joe.shevland@hushmail.com) Received: from smtp3.hushmail.com (localhost [127.0.0.1]) by smtp3.hushmail.com (Postfix) with SMTP id AAFD0E019C for ; Wed, 10 Jun 2015 13:05:13 +0000 (UTC) Received: from smtp.hushmail.com (w3.hushmail.com [65.39.178.62]) by smtp3.hushmail.com (Postfix) with ESMTP for ; Wed, 10 Jun 2015 13:05:13 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id 8723CC0487; Wed, 10 Jun 2015 13:05:13 +0000 (UTC) MIME-Version: 1.0 Date: Wed, 10 Jun 2015 23:05:13 +1000 To: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker From: "Joe Shevland" In-Reply-To: <20150610111135.C81EE2319B@smtp.hushmail.com> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150610130513.8723CC0487@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 13:39:58 -0000 I'd go for a Linux environment if I was going to use Docker. Aside from that, in general I break it down into steps first when trying to debug a problem. Remove the -q for a start to suppress warnings. The wget fails because of an invalid certificate on the site, try: $ cd /tmp $ wget --no-check-certificate https://get.docker.com -O temp.sh That'll get you the install script in /tmp/temp.sh. But the script deliberately looks for linux variants and will abort when you run it on freebsd... my understanding was Docker relies on Linux kernalisms fairly heavily (I don't know how far you get with linux compat in freebsd). On 10/6/2015 at 9:50 PM, opendaddy@hushmail.com wrote: > >Hi! > >Attempting to install the Discourse discussion forum >(https://github.com/discourse/discourse) on my DigitalOcean >FreeBSD VPS. Discourse requires Docker, however nothing happens >when I try `wget -qO- https://get.docker.com/ | sh` >(https://github.com/discourse/discourse/blob/master/docs/INSTALL- >cloud.md). > >What am I doing wrong? > >Thanks! > >O.D. > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions- >unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 14:29:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B4D84758 for ; Wed, 10 Jun 2015 14:29:10 +0000 (UTC) (envelope-from cscoman@gmail.com) Received: from mail-ie0-x22f.google.com (mail-ie0-x22f.google.com [IPv6:2607:f8b0:4001:c03::22f]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 7C4C11510 for ; Wed, 10 Jun 2015 14:29:10 +0000 (UTC) (envelope-from cscoman@gmail.com) Received: by iebgx4 with SMTP id gx4so35503373ieb.0 for ; Wed, 10 Jun 2015 07:29:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=URV507pzmzNpHrnZ8w4dwTfD7SjtdVj02ANgDuiwiFY=; b=Kvw+LoVBlCrDsBDeOC6jHb3nay2JAF6jecRPuAO9her/SdotON0Ul/5IuzWyvza/HS 6TwsC/FcUx3SPHXdwKFo9YOvcwWpw2rjEDIUHJK3G37kNIcfRGJ3aixBL4D1QRKEWpsl vQlKbqfaBl6wrtZwvHzDJkDEyskG/eOGxATnTtQUBHcF6qoiO5KFmzHmUiJC5WFZ88/S ba5YXldI4UV2oXeqj5TfAMTbgSRhCph0TR2xawODQ/60zPzQ6CNZEpcQ3ohgx2rfjDtr cF+wT1sFFSg4qhex5babEakRXnD1OPHaYSrA3cieghbuKVv4qlUat7aalRNq5tB2xrNa 7c6Q== MIME-Version: 1.0 X-Received: by 10.107.155.74 with SMTP id d71mr4637224ioe.29.1433946549787; Wed, 10 Jun 2015 07:29:09 -0700 (PDT) Received: by 10.79.27.75 with HTTP; Wed, 10 Jun 2015 07:29:09 -0700 (PDT) In-Reply-To: <20150610111135.C81EE2319B@smtp.hushmail.com> References: <20150610111135.C81EE2319B@smtp.hushmail.com> Date: Wed, 10 Jun 2015 07:29:09 -0700 Message-ID: Subject: Re: FreeBSD and Docker From: Jason Cox To: opendaddy@hushmail.com Cc: FreeBSD Mailing List Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 14:29:10 -0000 What are you doing wrong? You are trying to run docker on FreeBSD. Docker is a containerization technology built for Linux. It uses LXC (which is Linux Containers) for older Kernels or docker specific bits which are now part of the modern Linux kernel 3.10+. Docker is basically FreeBSD Jails, with a few more features and a lot more security issues. Stay away from docker for a while till they fix all the security issues in it or look at Rocket from the CoreOS team. I have not looked into Discourse, but any application that requires Docker is not worth using at this point. I am sure there must be a way to install it without using Docker. You can get hints of how someone gets apps working inside a Docker container by looking at the DockerFile if you go looking at https://registry.hub.docker.com. This is a build file for a containers. If you just cannot get Discourse working on FreeBSD, then by all means switch to a Linux install instead. Make sure it is not centos as it will not have the update Kernel drivers for better Docker support. On Wed, Jun 10, 2015 at 4:11 AM, wrote: > Hi! > > Attempting to install the Discourse discussion forum ( > https://github.com/discourse/discourse) on my DigitalOcean FreeBSD VPS. > Discourse requires Docker, however nothing happens when I try `wget -qO- > https://get.docker.com/ | sh` ( > https://github.com/discourse/discourse/blob/master/docs/INSTALL-cloud.md). > > What am I doing wrong? > > Thanks! > > O.D. > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > -- Jason Cox From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 14:52:54 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 2645EAA for ; Wed, 10 Jun 2015 14:52:54 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx02.qsc.de (mx02.qsc.de [213.148.130.14]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id DBFAE1C1E for ; Wed, 10 Jun 2015 14:52:53 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from r56.edvax.de (port-92-195-111-193.dynamic.qsc.de [92.195.111.193]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx02.qsc.de (Postfix) with ESMTPS id 5BAB327812; Wed, 10 Jun 2015 16:52:45 +0200 (CEST) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id t5AEqiK8002402; Wed, 10 Jun 2015 16:52:44 +0200 (CEST) (envelope-from freebsd@edvax.de) Date: Wed, 10 Jun 2015 16:52:44 +0200 From: Polytropon To: Jason Cox Cc: opendaddy@hushmail.com, FreeBSD Mailing List Subject: Re: FreeBSD and Docker Message-Id: <20150610165244.0c6f2ed7.freebsd@edvax.de> In-Reply-To: References: <20150610111135.C81EE2319B@smtp.hushmail.com> Reply-To: Polytropon Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 14:52:54 -0000 On Wed, 10 Jun 2015 07:29:09 -0700, Jason Cox wrote: > What are you doing wrong? You are trying to run docker on FreeBSD. Docker > is a containerization technology built for Linux. It uses LXC (which is > Linux Containers) for older Kernels or docker specific bits which are now > part of the modern Linux kernel 3.10+. It requires too many Linuxisms which aren't part of FreeBSD's Linux ABI, so expecting Docker to work on FreeBSD is somehow wrong. > Docker is basically FreeBSD Jails, > with a few more features and a lot more security issues. It's surely possible to run a "jail equivalent" of the Docker application package in question (here: Discourse). > I have not looked into Discourse, but any application that requires Docker > is not worth using at this point. Discourse is not exactly _requiring_ Docker - there has been a prepackaged Docker "instance" of all the components you need to run Discourse, not more, not less. It should be possible to run Discourse the "traditional" way - using native FreeBSD technology. > If > you just cannot get Discourse working on FreeBSD, then by all means switch > to a Linux install instead. Make sure it is not centos as it will not have > the update Kernel drivers for better Docker support. That is the final advice. :-) Docker is for Linux, Jails is for FreeBSD. It's somewhat comparable to a "pre-packaged VM image", more or less (probably less). Oh, and doing things like # wget http://getsomething.example.com | sudo bash is definitely _not_ the way you want to install software on FreeBSD. It rather seems to be a new Linuxism that has emerged during the recent years. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 15:42:08 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 62146290 for ; Wed, 10 Jun 2015 15:42:08 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.net (24-240-198-187.static.stls.mo.charter.com [24.240.198.187]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 394D41A81 for ; Wed, 10 Jun 2015 15:42:07 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.local (webmail [192.168.5.2]) by webmail.dweimer.net (8.14.9/8.14.9) with ESMTP id t5AFU49Y014857 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO) for ; Wed, 10 Jun 2015 10:30:04 -0500 (CDT) (envelope-from dweimer@dweimer.net) Received: (from www@localhost) by webmail.dweimer.local (8.14.9/8.14.9/Submit) id t5AFU4P9014856; Wed, 10 Jun 2015 10:30:04 -0500 (CDT) (envelope-from dweimer@dweimer.net) X-Authentication-Warning: webmail.dweimer.local: www set sender to dweimer@dweimer.net using -f To: FreeBSD Questions Subject: Squid 3.5.5 Port Update, with SSL X-PHP-Script: www.dweimer.net/webmail/index.php for 71.86.41.122 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Wed, 10 Jun 2015 10:30:04 -0500 From: dweimer Organization: dweimer.net Reply-To: dweimer@dweimer.net Mail-Reply-To: dweimer@dweimer.net Message-ID: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> X-Sender: dweimer@dweimer.net User-Agent: Roundcube Webmail/1.1.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 15:42:08 -0000 Has anyone else tried building the Squid Port since the 3.5.5 Update with SSL option enabled? I have tried with OpenSSL from base and ports, dies with the same error from either option. Making all in mgr Making all in ssl /bin/sh ../libtool --tag=CXX --mode=link c++ -Werror -Qunused-arguments -D_REENTRANT -I/usr/include -I/usr/local/include -O2 -pipe -I/usr/local/include -fstack-protector -fno-strict-aliasing -I/usr/local/include -export-dynamic -dlopen force -L/usr/lib -pthread -Wl,-rpath,/usr/local/lib -L/usr/local/lib -fstack-protector -L/usr/local/lib -Wl,-R/usr/local/lib -o squid AclRegs.o AuthReg.o AccessLogEntry.o AsyncEngine.o YesNoNone.o cache_cf.o CacheDigest.o cache_manager.o carp.o cbdata.o ChunkedCodingParser.o client_db.o client_side.o client_side_reply.o client_side_request.o BodyPipe.o clientStream.o CollapsedForwarding.o CompletionDispatcher.o ConfigOption.o ConfigParser.o CpuAffinity.o CpuAffinityMap.o CpuAffinitySet.o debug.o delay_pools.o DelayId.o DelayBucket.o DelayConfig.o DelayPool.o DelaySpec.o DelayTagged.o DelayUser.o DelayVector.o NullDelayId.o ClientDelayConfig.o disk.o DiskIO/DiskIOModule.o DiskIO/ReadRequest.o DiskIO/WriteRequest.o dlink.o dns_internal.o DnsLookupDetails.o errorpage.o ETag.o event.o EventLoop.o external_acl.o ExternalACLEntry.o FadingCounter.o fatal.o fd.o fde.o filemap.o fqdncache.o FwdState.o gopher.o helper.o htcp.o http.o HttpHdrCc.o HttpHdrRange.o HttpHdrSc.o HttpHdrScTarget.o HttpHdrContRange.o HttpHeader.o HttpHeaderTools.o HttpBody.o HttpMsg.o HttpParser.o HttpReply.o RequestFlags.o HttpRequest.o HttpRequestMethod.o icp_v2.o icp_v3.o int.o internal.o ipc.o ipcache.o SquidList.o main.o MasterXaction.o mem.o mem_node.o MemBuf.o MemObject.o mime.o mime_header.o multicast.o neighbors.o Notes.o Packer.o Parsing.o pconn.o peer_digest.o peer_proxy_negotiate_auth.o peer_select.o peer_sourcehash.o peer_userhash.o PeerPoolMgr.o redirect.o refresh.o RemovalPolicy.o send-announce.o MemBlob.o SBuf.o SBufExceptions.o SBufDetailedStats.o SBufStatsAction.o SquidMath.o SquidNew.o stat.o StatCounters.o StatHist.o String.o StrList.o stmem.o store.o StoreFileSystem.o store_io.o StoreIOState.o store_client.o store_digest.o store_dir.o store_key_md5.o store_log.o store_rebuild.o store_swapin.o store_swapmeta.o store_swapout.o StoreMetaUnpacker.o StoreMeta.o StoreMetaMD5.o StoreMetaSTD.o StoreMetaSTDLFS.o StoreMetaURL.o StoreMetaVary.o StoreStats.o StoreSwapLogData.o SwapDir.o Transients.o MemStore.o time.o tools.o tunnel.o unlinkd.o url.o urn.o wccp.o wccp2.o whois.o wordlist.o LoadableModule.o LoadableModules.o DiskIO/DiskIOModules_gen.o err_type.o err_detail_type.o globals.o hier_code.o icp_opcode.o LogTags.o lookup_t.o repl_modules.o swap_log_op.o auth/libacls.la ident/libident.la acl/libacls.la acl/libstate.la auth/libauth.la libAIO.a libBlocking.a libIpcIo.a libMmapped.a libDiskThreads.a libDiskDaemon.a acl/libapi.la base/libbase.la libsquid.la ip/libip.la fs/libfs.la ssl/libsslsquid.la ssl/libsslutil.la ipc/libipc.la mgr/libmgr.la anyp/libanyp.la comm/libcomm.la eui/libeui.la helper/libhelper.la http/libsquid-http.la icmp/libicmp.la icmp/libicmp-core.la log/liblog.la format/libformat.la clients/libclients.la servers/libservers.la ftp/libftp.la DiskIO/AIO/AIODiskIOModule.o DiskIO/Blocking/BlockingDiskIOModule.o DiskIO/IpcIo/IpcIoDiskIOModule.o DiskIO/Mmapped/MmappedDiskIOModule.o DiskIO/DiskThreads/DiskThreadsDiskIOModule.o DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o repl/liblru.a repl/libheap.a -lrt -lnettle -lcrypt parser/libsquid-parser.la ../lib/libmisccontainers.la ../lib/libmiscencoding.la ../lib/libmiscutil.la -L/usr/local/lib -lssl -L/usr/local/lib -lcrypto -L/usr/lib -L/usr/lib -lgssapi -lgssapi_krb5 -lheimntlm -lkrb5 -lhx509 -lcom_err -lcrypto -lasn1 -lwind -lheimbase -lroken -lcrypt -pthread -L/usr/lib -lkrb5 -lhx509 -lcom_err -lcrypto -lasn1 -lwind -lheimbase -lroken -lcrypt -pthread ../compat/libcompat-squid.la -lm -lkrb5 -lgssapi -lgssapi_krb5 -L.. ../libltdl/libltdlc.la libtool: link: rm -f .libs/squid.nm .libs/squid.nmS .libs/squid.nmT libtool: link: (cd .libs && cc -I/usr/include -O2 -pipe -I/usr/local/include -fstack-protector -fno-strict-aliasing -I/usr/local/include -c -fno-builtin "squidS.c") libtool: link: rm -f ".libs/squidS.c" ".libs/squid.nm" ".libs/squid.nmS" ".libs/squid.nmT" libtool: link: c++ -Werror -Qunused-arguments -D_REENTRANT -I/usr/include -I/usr/local/include -O2 -pipe -I/usr/local/include -fstack-protector -fno-strict-aliasing -I/usr/local/include .libs/squidS.o -pthread -Wl,-rpath -Wl,/usr/local/lib -fstack-protector -Wl,-R/usr/local/lib -o squid AclRegs.o AuthReg.o AccessLogEntry.o AsyncEngine.o YesNoNone.o cache_cf.o CacheDigest.o cache_manager.o carp.o cbdata.o ChunkedCodingParser.o client_db.o client_side.o client_side_reply.o client_side_request.o BodyPipe.o clientStream.o CollapsedForwarding.o CompletionDispatcher.o ConfigOption.o ConfigParser.o CpuAffinity.o CpuAffinityMap.o CpuAffinitySet.o debug.o delay_pools.o DelayId.o DelayBucket.o DelayConfig.o DelayPool.o DelaySpec.o DelayTagged.o DelayUser.o DelayVector.o NullDelayId.o ClientDelayConfig.o disk.o DiskIO/DiskIOModule.o DiskIO/ReadRequest.o DiskIO/WriteRequest.o dlink.o dns_internal.o DnsLookupDetails.o errorpage.o ETag.o event.o EventLoop.o external_acl.o ExternalACLEntry.o FadingCounter.o fatal.o fd.o fde.o filemap.o fqdncache.o FwdState.o gopher.o helper.o htcp.o http.o HttpHdrCc.o HttpHdrRange.o HttpHdrSc.o HttpHdrScTarget.o HttpHdrContRange.o HttpHeader.o HttpHeaderTools.o HttpBody.o HttpMsg.o HttpParser.o HttpReply.o RequestFlags.o HttpRequest.o HttpRequestMethod.o icp_v2.o icp_v3.o int.o internal.o ipc.o ipcache.o SquidList.o main.o MasterXaction.o mem.o mem_node.o MemBuf.o MemObject.o mime.o mime_header.o multicast.o neighbors.o Notes.o Packer.o Parsing.o pconn.o peer_digest.o peer_proxy_negotiate_auth.o peer_select.o peer_sourcehash.o peer_userhash.o PeerPoolMgr.o redirect.o refresh.o RemovalPolicy.o send-announce.o MemBlob.o SBuf.o SBufExceptions.o SBufDetailedStats.o SBufStatsAction.o SquidMath.o SquidNew.o stat.o StatCounters.o StatHist.o String.o StrList.o stmem.o store.o StoreFileSystem.o store_io.o StoreIOState.o store_client.o store_digest.o store_dir.o store_key_md5.o store_log.o store_rebuild.o store_swapin.o store_swapmeta.o store_swapout.o StoreMetaUnpacker.o StoreMeta.o StoreMetaMD5.o StoreMetaSTD.o StoreMetaSTDLFS.o StoreMetaURL.o StoreMetaVary.o StoreStats.o StoreSwapLogData.o SwapDir.o Transients.o MemStore.o time.o tools.o tunnel.o unlinkd.o url.o urn.o wccp.o wccp2.o whois.o wordlist.o LoadableModule.o LoadableModules.o DiskIO/DiskIOModules_gen.o err_type.o err_detail_type.o globals.o hier_code.o icp_opcode.o LogTags.o lookup_t.o repl_modules.o swap_log_op.o DiskIO/AIO/AIODiskIOModule.o DiskIO/Blocking/BlockingDiskIOModule.o DiskIO/IpcIo/IpcIoDiskIOModule.o DiskIO/Mmapped/MmappedDiskIOModule.o DiskIO/DiskThreads/DiskThreadsDiskIOModule.o DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o -pthread -pthread -Wl,--export-dynamic /var/ports/usr/ports/www/squid/work/squid-3.5.5/libltdl/./.libs/dlopen.a -L/usr/lib -L/usr/local/lib auth/.libs/libacls.a ident/.libs/libident.a acl/.libs/libacls.a acl/.libs/libstate.a auth/.libs/libauth.a libAIO.a libBlocking.a libIpcIo.a libMmapped.a libDiskThreads.a libDiskDaemon.a acl/.libs/libapi.a base/.libs/libbase.a ./.libs/libsquid.a ip/.libs/libip.a fs/.libs/libfs.a ssl/.libs/libsslsquid.a ssl/.libs/libsslutil.a ipc/.libs/libipc.a mgr/.libs/libmgr.a anyp/.libs/libanyp.a comm/.libs/libcomm.a eui/.libs/libeui.a helper/.libs/libhelper.a http/.libs/libsquid-http.a icmp/.libs/libicmp.a icmp/.libs/libicmp-core.a log/.libs/liblog.a format/.libs/libformat.a clients/.libs/libclients.a servers/.libs/libservers.a ftp/.libs/libftp.a repl/liblru.a repl/libheap.a -lrt -lnettle parser/.libs/libsquid-parser.a ../lib/.libs/libmisccontainers.a ../lib/.libs/libmiscencoding.a ../lib/.libs/libmiscutil.a -lssl -lheimntlm -lhx509 -lcom_err -lcrypto -lasn1 -lwind -lheimbase -lroken -lcrypt ../compat/.libs/libcompat-squid.a -lm -L.. ../libltdl/.libs/libltdlc.a -lkrb5 -lgssapi -lgssapi_krb5 -pthread ssl/.libs/libsslsquid.a(bio.o): In function `Ssl::Bio::sslFeatures::applyToSSL(ssl_st*, Ssl::BumpMode) const': bio.cc:(.text+0x46ca): undefined reference to `SSL_set_alpn_protos' c++: error: linker command failed with exit code 1 (use -v to see invocation) libtool: link: rm -f ".libs/squidS.o" *** Error code 1 Stop. make[5]: stopped in /var/ports/usr/ports/www/squid/work/squid-3.5.5/src *** Error code 1 Stop. make[4]: stopped in /var/ports/usr/ports/www/squid/work/squid-3.5.5/src *** Error code 1 Stop. make[3]: stopped in /var/ports/usr/ports/www/squid/work/squid-3.5.5/src *** Error code 1 Stop. make[2]: stopped in /var/ports/usr/ports/www/squid/work/squid-3.5.5 *** Error code 1 Stop. make[1]: stopped in /usr/ports/www/squid *** Error code 1 Stop. make: stopped in /usr/ports/www/squid -- Thanks, Dean E. Weimer http://www.dweimer.net/ From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 16:23:09 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D2F3A1BA for ; Wed, 10 Jun 2015 16:23:09 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id 789B7160B for ; Wed, 10 Jun 2015 16:23:08 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t5AGN0jt036977 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Wed, 10 Jun 2015 17:23:03 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <55786468.80408@ifdnrg.com> Date: Wed, 10 Jun 2015 17:23:04 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: r220's with serial References: <55773D18.3060804@ifdnrg.com> <55774063.4050306@ifdnrg.com> <55774A1A.6030600@ifdnrg.com> <557751B9.3080706@ifdnrg.com> In-Reply-To: <557751B9.3080706@ifdnrg.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 16:23:09 -0000 On 09/06/2015 21:51, Paul Macdonald wrote: > > On 09/06/2015 21:18, Paul Macdonald wrote: >> >> uart0 not seen in dmesg which i think is def related: >> > > Is the issue is a lack of a an appropriate serial driver in 10.1 for > dell r220's? > > (serial is fine till OS boot and login should be shown) > > centOS find's ttyS0 and ttyS1 fine on this box (dell r220) Under FreeBSD 10-1 uart0 is not found (dmesg or under /dev) uart1 is found as per: Jun 10 12:25:14 asd kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Paul. -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 17:45:44 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 236B8F36 for ; Wed, 10 Jun 2015 17:45:44 +0000 (UTC) (envelope-from fbsd@xtaz.co.uk) Received: from mail.xtaz.uk (tao.xtaz.uk [IPv6:2001:8b0:202::10]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id DF9D91BDA for ; Wed, 10 Jun 2015 17:45:43 +0000 (UTC) (envelope-from fbsd@xtaz.co.uk) Received: by mail.xtaz.uk (Postfix, from userid 1001) id 01E8C20AEA3A; Wed, 10 Jun 2015 18:45:38 +0100 (BST) Date: Wed, 10 Jun 2015 18:45:38 +0100 From: Matt Smith To: dweimer@dweimer.net Cc: FreeBSD Questions Subject: Re: Squid 3.5.5 Port Update, with SSL Message-ID: <20150610174538.GE44513@xtaz.uk> Mail-Followup-To: Matt Smith , dweimer@dweimer.net, FreeBSD Questions References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Disposition: inline In-Reply-To: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 17:45:44 -0000 On Jun 10 10:30, dweimer wrote: >Has anyone else tried building the Squid Port since the 3.5.5 Update >with SSL option enabled? > >I have tried with OpenSSL from base and ports, dies with the same >error from either option. > >bio.cc:(.text+0x46ca): undefined reference to `SSL_set_alpn_protos' >c++: error: linker command failed with exit code 1 (use -v to see >invocation) >libtool: link: rm -f ".libs/squidS.o" >*** Error code 1 Yes. It worked fine for me. To begin with it errored out instantly telling me that I had to select at least one of the SSL options. So I ran make config and noticed the SSL options at the bottom. Selected OpenSSL and ran the upgrade again. Everything compiled and installed fine and I've been using it since. I'm using FreeBSD 10.1-STABLE r283027 dated from May 17th and I have the OpenSSL 1.0.2 port installed. -- Matt From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 19:37:29 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id EDAE21AD for ; Wed, 10 Jun 2015 19:37:29 +0000 (UTC) (envelope-from che@bein.link) Received: from mail.bein.link (bein.link [37.252.124.82]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id B21E21991 for ; Wed, 10 Jun 2015 19:37:29 +0000 (UTC) (envelope-from che@bein.link) Received: from thinkpad.localnet (home.bein.link [172.16.32.6]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.bein.link (Postfix) with ESMTPSA id D2C061AF1AC; Wed, 10 Jun 2015 19:37:18 +0000 (UTC) From: Maxim V Filimonov To: freebsd-questions@freebsd.org, Polytropon Reply-To: che@bein.link Cc: Jason Cox , opendaddy@hushmail.com Subject: Re: FreeBSD and Docker Date: Wed, 10 Jun 2015 22:38:33 +0300 Message-ID: <1507965.zgzlHR604A@thinkpad> User-Agent: KMail/4.14.3 (FreeBSD/10.1-RELEASE-p10; KDE/4.14.3; amd64; ; ) In-Reply-To: <20150610165244.0c6f2ed7.freebsd@edvax.de> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 19:37:30 -0000 On Wednesday 10 June 2015 16:52:44 Polytropon wrote: > On Wed, 10 Jun 2015 07:29:09 -0700, Jason Cox wrote: > > What are you doing wrong? You are trying to run docker on FreeBSD. Docker > > is a containerization technology built for Linux. It uses LXC (which is > > Linux Containers) for older Kernels or docker specific bits which are now > > part of the modern Linux kernel 3.10+. > > It requires too many Linuxisms which aren't part of FreeBSD's > Linux ABI, so expecting Docker to work on FreeBSD is somehow > wrong. Some guy tried to port Docker on FreeBSD, and even got it working IIRC. > > Oh, and doing things like > > # wget http://getsomething.example.com | sudo bash > > is definitely _not_ the way you want to install software on FreeBSD. > It rather seems to be a new Linuxism that has emerged during the > recent years. :-) That's not a Linuxism; in fact, that's a "hipsterism". But that's another question. -- wbr, Maxim Filimonov From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 20:23:25 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id A8FB17C5 for ; Wed, 10 Jun 2015 20:23:25 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.net (24-240-198-187.static.stls.mo.charter.com [24.240.198.187]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 81E6016AB for ; Wed, 10 Jun 2015 20:23:24 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.local (webmail [192.168.5.2]) by webmail.dweimer.net (8.14.9/8.14.9) with ESMTP id t5AKNLb9018089 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Wed, 10 Jun 2015 15:23:22 -0500 (CDT) (envelope-from dweimer@dweimer.net) Received: (from www@localhost) by webmail.dweimer.local (8.14.9/8.14.9/Submit) id t5AKNLRK018086; Wed, 10 Jun 2015 15:23:21 -0500 (CDT) (envelope-from dweimer@dweimer.net) X-Authentication-Warning: webmail.dweimer.local: www set sender to dweimer@dweimer.net using -f To: Matt Smith , dweimer@dweimer.net, FreeBSD Questions Subject: Re: Squid 3.5.5 Port Update, with SSL X-PHP-Script: www.dweimer.net/webmail/index.php for 71.86.41.122 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Wed, 10 Jun 2015 15:23:21 -0500 From: dweimer Organization: dweimer.net Reply-To: dweimer@dweimer.net Mail-Reply-To: dweimer@dweimer.net In-Reply-To: <20150610174538.GE44513@xtaz.uk> References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> <20150610174538.GE44513@xtaz.uk> Message-ID: <4e960c86e2468531d81e371af009e010@dweimer.net> X-Sender: dweimer@dweimer.net User-Agent: Roundcube Webmail/1.1.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 20:23:25 -0000 On 06/10/2015 12:45 pm, Matt Smith wrote: > On Jun 10 10:30, dweimer wrote: >> Has anyone else tried building the Squid Port since the 3.5.5 Update >> with SSL option enabled? >> >> I have tried with OpenSSL from base and ports, dies with the same >> error from either option. >> >> bio.cc:(.text+0x46ca): undefined reference to `SSL_set_alpn_protos' >> c++: error: linker command failed with exit code 1 (use -v to see >> invocation) >> libtool: link: rm -f ".libs/squidS.o" >> *** Error code 1 > > Yes. It worked fine for me. To begin with it errored out instantly > telling me that I had to select at least one of the SSL options. So I > ran make config and noticed the SSL options at the bottom. Selected > OpenSSL and ran the upgrade again. Everything compiled and installed > fine and I've been using it since. > > I'm using FreeBSD 10.1-STABLE r283027 dated from May 17th and I have > the OpenSSL 1.0.2 port installed. well this is odd, I have only two options with SSL these have both been available for some time: [x] SSL SSL gatewaying support [ ] SSL_CRTD Use ssl_crtd to handle SSL cert requests It ends with Kerbose authentication options on the make config, no option about using OpenSSL I am trying to build it now on 10.1-RELEASE-p11, built from source just today, ports tree updated today along with a fresh installation of all the other ports. Still have my 10.1-RELEASE-p10 jail running with the old 3.5.3_1 version of the port installed. from Makefile # $FreeBSD: head/www/squid/Makefile 388783 2015-06-07 21:03:25Z flo $ PORTNAME= squid PORTVERSION= 3.5.5 Options File: # This file is auto-generated by 'make config'. # Options for squid-3.5.5 _OPTIONS_READ=squid-3.5.5 _FILE_COMPLETE_OPTIONS_LIST=ARP_ACL AUTH_LDAP AUTH_NIS AUTH_SASL AUTH_SMB AUTH_SQL CACHE_DIGESTS DEBUG DELAY_POOLS DOCS ECAP ESI EXAMPLES FOLLOW_XFF FS_AUFS FS_DISKD FS_ROCK HTCP ICAP ICMP IDENT IPV6 KQUEUE LARGEFILE LAX_HTTP NETTLE SNMP SSL SSL_CRTD STACKTRACES TP_IPF TP_IPFW TP_PF VIA_DB WCCP WCCPV2 GSSAPI_NONE GSSAPI_BASE GSSAPI_HEIMDAL GSSAPI_MIT OPTIONS_FILE_UNSET+=ARP_ACL OPTIONS_FILE_UNSET+=AUTH_LDAP OPTIONS_FILE_UNSET+=AUTH_NIS OPTIONS_FILE_UNSET+=AUTH_SASL OPTIONS_FILE_UNSET+=AUTH_SMB OPTIONS_FILE_UNSET+=AUTH_SQL OPTIONS_FILE_SET+=CACHE_DIGESTS OPTIONS_FILE_UNSET+=DEBUG OPTIONS_FILE_SET+=DELAY_POOLS OPTIONS_FILE_SET+=DOCS OPTIONS_FILE_UNSET+=ECAP OPTIONS_FILE_UNSET+=ESI OPTIONS_FILE_SET+=EXAMPLES OPTIONS_FILE_SET+=FOLLOW_XFF OPTIONS_FILE_SET+=FS_AUFS OPTIONS_FILE_SET+=FS_DISKD OPTIONS_FILE_UNSET+=FS_ROCK OPTIONS_FILE_SET+=HTCP OPTIONS_FILE_UNSET+=ICAP OPTIONS_FILE_SET+=ICMP OPTIONS_FILE_SET+=IDENT OPTIONS_FILE_SET+=IPV6 OPTIONS_FILE_SET+=KQUEUE OPTIONS_FILE_SET+=LARGEFILE OPTIONS_FILE_SET+=LAX_HTTP OPTIONS_FILE_SET+=NETTLE OPTIONS_FILE_UNSET+=SNMP OPTIONS_FILE_SET+=SSL OPTIONS_FILE_SET+=SSL_CRTD OPTIONS_FILE_UNSET+=STACKTRACES OPTIONS_FILE_UNSET+=TP_IPF OPTIONS_FILE_UNSET+=TP_IPFW OPTIONS_FILE_UNSET+=TP_PF OPTIONS_FILE_SET+=VIA_DB OPTIONS_FILE_SET+=WCCP OPTIONS_FILE_SET+=WCCPV2 OPTIONS_FILE_UNSET+=GSSAPI_NONE OPTIONS_FILE_SET+=GSSAPI_BASE OPTIONS_FILE_UNSET+=GSSAPI_HEIMDAL OPTIONS_FILE_UNSET+=GSSAPI_MIT -- Thanks, Dean E. Weimer http://www.dweimer.net/ From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 20:55:35 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 9A277A93 for ; Wed, 10 Jun 2015 20:55:35 +0000 (UTC) (envelope-from fbsd@xtaz.co.uk) Received: from mail.xtaz.uk (tao.xtaz.uk [IPv6:2001:8b0:202::10]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 5F25F1E8A for ; Wed, 10 Jun 2015 20:55:34 +0000 (UTC) (envelope-from fbsd@xtaz.co.uk) Received: by mail.xtaz.uk (Postfix, from userid 1001) id 926F920AEA38; Wed, 10 Jun 2015 21:55:30 +0100 (BST) Date: Wed, 10 Jun 2015 21:55:30 +0100 From: Matt Smith To: dweimer Cc: FreeBSD Questions Subject: Re: Squid 3.5.5 Port Update, with SSL Message-ID: <20150610205530.GG44513@xtaz.uk> Mail-Followup-To: Matt Smith , dweimer , FreeBSD Questions References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> <20150610174538.GE44513@xtaz.uk> <4e960c86e2468531d81e371af009e010@dweimer.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Disposition: inline In-Reply-To: <4e960c86e2468531d81e371af009e010@dweimer.net> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 20:55:35 -0000 On Jun 10 15:23, dweimer wrote: >well this is odd, I have only two options with SSL these have both been >available for some time: > [x] SSL SSL gatewaying support > [ ] SSL_CRTD Use ssl_crtd to handle SSL cert requests > >It ends with Kerbose authentication options on the make config, no >option about using OpenSSL Oops my bad. It was actually the ffmpeg port that gave me that error about SSL where I had to run make config and select one. I upgraded that at the same time as squid so I mixed the two up. So in that case I don't know what the issue could be I'm afraid. -- Matt From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 21:12:37 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 0201C111 for ; Wed, 10 Jun 2015 21:12:37 +0000 (UTC) (envelope-from chris@vindaloo.com) Received: from geonosis.vindaloo.com (geonosis.vindaloo.com [IPv6:2001:470:1f07:26b:0:ac18:9026:1]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (Client CN "smtp.vindaloo.com", Issuer "Vindaloo CA" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id C64A014B4 for ; Wed, 10 Jun 2015 21:12:33 +0000 (UTC) (envelope-from chris@vindaloo.com) Received: from kessel.vindaloo.com (kessel.vindaloo.com [172.24.145.71]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by geonosis.vindaloo.com (Postfix) with ESMTPSA id 997C2BFB5; Wed, 10 Jun 2015 17:12:31 -0400 (EDT) Date: Wed, 10 Jun 2015 17:12:26 -0400 From: Christopher Sean Hilton To: freebsd-questions@freebsd.org Cc: freebsd-misc@freebsd.org Subject: pf block policy for IPv6 and IPv4 Message-ID: <20150610211226.GA35372@kessel.vindaloo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 21:12:37 -0000 Good afternoon and thank you in advance. I'm running FreeBSD 9.3-STABLE: FreeBSD anza.example.com 9.3-STABLE \ FreeBSD 9.3-STABLE #0 r269627: Wed Aug 6 13:48:46 EDT 2014 \ root@dagobah:/usr/obj/amd64/usr/src/sys/GENERIC amd64 on my imap mailserver. It's dual homed and has both A and AAAA records in DNS: $ host anza.example.com anza.example.com has address 10.17.53.96 anza.example.com has IPv6 address fe80::aaaa:bbbb:60:0 My pf.conf seems to be pretty standard... ext_if="em0" int_if="em1" set skip on { lo $int_if } table persist const { em0:network } table persist file "/etc/pf/table/friends" table persist scrub in no-df ## Block inbound packets by default. Use return rather than drop ## to make debugging easier as this server is currently internal ## only. block return log block drop log quick from pass out antispoof quick for { lo $int_if } ## Pass ssh but treat jerks and a*holes accordingly. pass in on $ext_if proto tcp from to ($ext_if) port ssh \ keep state pass in on $ext_if proto tcp from ! to ($ext_if) port ssh \ keep state \ (max-src-conn 5, max-src-conn-rate 5/30, \ overload flush global) ... Last night as I was testing the configuration of the imap server, I tripped over some unexpected behaviour. *** The issue was that I had forgotten to add rules for imap to my pf.conf. Testing failed because the service was firewalled off. This was simple to fix and is only ancilliary to my question. *** Here's what I got when I used telnet to connect directly to the service across my network: $ telnet anza.example.com 143 Trying 10.17.53.96... telnet: connect to address 10.17.53.96: Connection refused Trying fe80::aaaa:bbbb:60:0... telnet: connect to address fe80::aaaa:bbbb:60:0: Operation timed out telnet: Unable to connect to remote host The IPv4 connection died immediatly with "Connection refused". That's consistent with my firewall rules which say to return a TCP RST for unopened services. However, I expected the IPv6 connection attempt to do the same thing and it didn't. To be clear, I expected: block return log To return a TCP RST across both IPv4 and IPv6 connect attempts to firewalled ports. If I'm missing something simple here please feel free to pass the cluebat. Thanks again -- Chris From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 22:08:30 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 9A564BDA for ; Wed, 10 Jun 2015 22:08:30 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from mail-vn0-x242.google.com (mail-vn0-x242.google.com [IPv6:2607:f8b0:400c:c0f::242]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 5379F108A for ; Wed, 10 Jun 2015 22:08:30 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: by vnbg129 with SMTP id g129so6233810vnb.0 for ; Wed, 10 Jun 2015 15:08:29 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:subject:from:to:date:content-type:mime-version :content-transfer-encoding; bh=zdYM2UXJRki155UqfO1Mr37HLifOHtIK1gE4/fXl1ho=; b=nqcUci4vtyApP57B8qQaUTnRCgOA1kp/Tx//NdIA06Qi5TINad8Pq/VYmzJOGmAAYo jKR5b1CAbMMdCqeqb5SDJFvplWgIQIlbYCzS/q1Gh7qnEkuiYNJU/FxgOBAKG7ZRZ1zM sb5HgYEOMO7F8QW7Adn+w/0hfak8dw7JWdlrkg8GyLgJJFt9Ti86kV4XwGhT67hT8WXF SiDZsCBLLwHMuwzZGVUuniZRQrkrJmMGc0j0Zm/aFXDqMMJLAHC9VW3g2nh7VZY4/JPu EycHVcfAUs3laEW0JxYy5C6UwvmCwHkL2wOWIjpqMlpXm4bgum1RLAJdrEYK1C23Cnj3 WFyA== X-Received: by 10.52.11.5 with SMTP id m5mr10585060vdb.53.1433974109235; Wed, 10 Jun 2015 15:08:29 -0700 (PDT) Received: from lumiwa (pool-72-73-112-26.ptldme.east.myfairpoint.net. [72.73.112.26]) by mx.google.com with ESMTPSA id h14sm12260995vdj.0.2015.06.10.15.08.28 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 10 Jun 2015 15:08:28 -0700 (PDT) Message-ID: <1433974107.30250.1.camel@gmail.com> Subject: opal rebuild From: ajtiM To: FreeBSD Questions Date: Wed, 10 Jun 2015 18:08:27 -0400 Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.12.11 FreeBSD GNOME Team Port Mime-Version: 1.0 Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 22:08:30 -0000 Hi! I try to rebuild net/opal on FreeBSD 10.1 Release (amd64)and I got: gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/IMA_ADPCM' gmake[4]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/celt' mkdir -p /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/audio install /usr/ports/net/opal/work/opal-3.10.10/plugins/../lib_FreeBSD_amd64/plugins/celt/celt_ptplugin.so /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/audio gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/celt' gmake[4]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/SILK' gmake[5]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/SILK/SILK_SDK' gmake[5]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/SILK/SILK_SDK' mkdir -p /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/audio install /usr/ports/net/opal/work/opal-3.10.10/plugins/../lib_FreeBSD_amd64/plugins/silk/silk_ptplugin.so /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/audio gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/audio/SILK' gmake[4]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/video/H.261-vic' mkdir -p /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/video install /usr/ports/net/opal/work/opal-3.10.10/plugins/../lib_FreeBSD_amd64/plugins/h261_vic/h261_vic_ptplugin.so /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/video gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/video/H.261-vic' gmake[4]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/LID/VPB' mkdir -p /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/lid install /usr/ports/net/opal/work/opal-3.10.10/plugins/../lib_FreeBSD_amd64/plugins/vpb/vpb_ptplugin.so /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/lid gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/LID/VPB' gmake[4]: Entering directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/fax/fax_spandsp' mkdir -p /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/fax install /usr/ports/net/opal/work/opal-3.10.10/plugins/../lib_FreeBSD_amd64/plugins/spandsp/spandsp_ptplugin.so /usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/fax gmake[4]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins/fax/fax_spandsp' gmake[3]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10/plugins' gmake[2]: Leaving directory '/usr/ports/net/opal/work/opal-3.10.10' /bin/ln -sf libopal.so.3.10.10 /usr/ports/net/opal/work/stage/usr/local/lib/libopal.so.3 /bin/ln -sf libopal.so.3.10.10 /usr/ports/net/opal/work/stage/usr/local/lib/libopal.so.3.10 /usr/bin/strip: '/usr/ports/net/opal/work/stage/usr/local/lib/opal-3.10.10/codecs/video/h264_video_pwplugin_helper': No such file *** Error code 1 Stop. make[1]: stopped in /usr/ports/net/opal *** Error code 1 Stop. make: stopped in /usr/ports/net/opal ===>>> make stage failed for net/opal ===>>> Aborting update Thank you. From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 23:47:46 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 1990B2F4 for ; Wed, 10 Jun 2015 23:47:46 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp3.hushmail.com (smtp3.hushmail.com [65.39.178.200]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id F3DD619B2 for ; Wed, 10 Jun 2015 23:47:45 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp3.hushmail.com (localhost [127.0.0.1]) by smtp3.hushmail.com (Postfix) with SMTP id 9A170E019C for ; Wed, 10 Jun 2015 23:47:44 +0000 (UTC) Received: from smtp.hushmail.com (w3.hushmail.com [65.39.178.62]) by smtp3.hushmail.com (Postfix) with ESMTP; Wed, 10 Jun 2015 23:47:43 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id 6A722C0487; Wed, 10 Jun 2015 23:47:43 +0000 (UTC) MIME-Version: 1.0 Date: Wed, 10 Jun 2015 23:47:43 +0000 To: "Polytropon" , "Jason Cox" Cc: "FreeBSD Mailing List" Subject: Re: FreeBSD and Docker From: opendaddy@hushmail.com In-Reply-To: <20150610165244.0c6f2ed7.freebsd@edvax.de> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150610234743.6A722C0487@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 23:47:46 -0000 Hello everyone! Thanks a lot for your input. Any chance I could use something like overlayfs / zfs like the author claims? https://meta.discourse.org/t/is-there-any-way-to-install-discourse-without-docker/16977 Do sign up and give your feedback. There used to be a FreeBSD thread @ meta.discourse.org but it just got deleted. Many thanks! O.D. On 10. juni 2015 at 2:52 PM, "Polytropon" wrote: > >On Wed, 10 Jun 2015 07:29:09 -0700, Jason Cox wrote: >> What are you doing wrong? You are trying to run docker on >FreeBSD. Docker >> is a containerization technology built for Linux. It uses LXC >(which is >> Linux Containers) for older Kernels or docker specific bits >which are now >> part of the modern Linux kernel 3.10+. > >It requires too many Linuxisms which aren't part of FreeBSD's >Linux ABI, so expecting Docker to work on FreeBSD is somehow >wrong. > > > >> Docker is basically FreeBSD Jails, >> with a few more features and a lot more security issues. > >It's surely possible to run a "jail equivalent" of the Docker >application package in question (here: Discourse). > > > >> I have not looked into Discourse, but any application that >requires Docker >> is not worth using at this point. > >Discourse is not exactly _requiring_ Docker - there has been >a prepackaged Docker "instance" of all the components you need >to run Discourse, not more, not less. It should be possible to >run Discourse the "traditional" way - using native FreeBSD >technology. > > > >> If >> you just cannot get Discourse working on FreeBSD, then by all >means switch >> to a Linux install instead. Make sure it is not centos as it >will not have >> the update Kernel drivers for better Docker support. > >That is the final advice. :-) > >Docker is for Linux, Jails is for FreeBSD. It's somewhat comparable >to a "pre-packaged VM image", more or less (probably less). > >Oh, and doing things like > > # wget http://getsomething.example.com | sudo bash > >is definitely _not_ the way you want to install software on >FreeBSD. >It rather seems to be a new Linuxism that has emerged during the >recent years. :-) > > > >-- >Polytropon >Magdeburg, Germany >Happy FreeBSD user since 4.0 >Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Wed Jun 10 23:51:20 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 536DB39B for ; Wed, 10 Jun 2015 23:51:20 +0000 (UTC) (envelope-from outbackdingo@gmail.com) Received: from mail-pa0-x230.google.com (mail-pa0-x230.google.com [IPv6:2607:f8b0:400e:c03::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 231BA1B30 for ; Wed, 10 Jun 2015 23:51:20 +0000 (UTC) (envelope-from outbackdingo@gmail.com) Received: by payr10 with SMTP id r10so43198512pay.1 for ; Wed, 10 Jun 2015 16:51:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=YlFj8lwOxgLCTW++YjhHIKXHuJWTCLuJ44usrDxJMpg=; b=gokLyvWw9wg7KZ/jcCru9Wa6to1DQxFo1ghIQ5J+yE9otVPf2Dud0IddCIXsc2Ucqw XjNa6minBfE+au+o4MK2nMCykMY/juvnngqQNF3MeNP1i5uare31xkanHOdk+qutVR8d MdDcKPtQkScc7RmJWN6KI2HRL7bGsyp/sXIgU1HC30BFb+geZJbzIu1jSirF2cgpfw0k U/NQtWOuUd28Zs0t+6rRtzmYsXcPK3bqS05d2bBJW+WVx2mX/f6LT43NLzGXj95NTWDA NUqG7BAAA2XofRSxyjlApyTtgOXiUf+PRaDqNxst0LtXh1w8UA27T6mIT67kNkDqPRUp cQuQ== MIME-Version: 1.0 X-Received: by 10.68.69.48 with SMTP id b16mr9746370pbu.144.1433980279525; Wed, 10 Jun 2015 16:51:19 -0700 (PDT) Received: by 10.70.140.139 with HTTP; Wed, 10 Jun 2015 16:51:19 -0700 (PDT) In-Reply-To: <20150610234743.6A722C0487@smtp.hushmail.com> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <20150610234743.6A722C0487@smtp.hushmail.com> Date: Thu, 11 Jun 2015 09:51:19 +1000 Message-ID: Subject: Re: FreeBSD and Docker From: Outback Dingo To: opendaddy@hushmail.com Cc: Polytropon , Jason Cox , FreeBSD Mailing List Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Jun 2015 23:51:20 -0000 On Thu, Jun 11, 2015 at 9:47 AM, wrote: > Hello everyone! > > Thanks a lot for your input. > > Any chance I could use something like overlayfs / zfs like the author > claims? > > > https://meta.discourse.org/t/is-there-any-way-to-install-discourse-without-docker/16977 > > Do sign up and give your feedback. There used to be a FreeBSD thread @ > meta.discourse.org but it just got deleted. > > Many thanks! > > You might want to look at iocage, or jetpack https://github.com/3ofcoins/jetpack https://github.com/iocage/iocage https://github.com/pr1ntf/iohyve > O.D. > > On 10. juni 2015 at 2:52 PM, "Polytropon" wrote: > > > >On Wed, 10 Jun 2015 07:29:09 -0700, Jason Cox wrote: > >> What are you doing wrong? You are trying to run docker on > >FreeBSD. Docker > >> is a containerization technology built for Linux. It uses LXC > >(which is > >> Linux Containers) for older Kernels or docker specific bits > >which are now > >> part of the modern Linux kernel 3.10+. > > > >It requires too many Linuxisms which aren't part of FreeBSD's > >Linux ABI, so expecting Docker to work on FreeBSD is somehow > >wrong. > > > > > > > >> Docker is basically FreeBSD Jails, > >> with a few more features and a lot more security issues. > > > >It's surely possible to run a "jail equivalent" of the Docker > >application package in question (here: Discourse). > > > > > > > >> I have not looked into Discourse, but any application that > >requires Docker > >> is not worth using at this point. > > > >Discourse is not exactly _requiring_ Docker - there has been > >a prepackaged Docker "instance" of all the components you need > >to run Discourse, not more, not less. It should be possible to > >run Discourse the "traditional" way - using native FreeBSD > >technology. > > > > > > > >> If > >> you just cannot get Discourse working on FreeBSD, then by all > >means switch > >> to a Linux install instead. Make sure it is not centos as it > >will not have > >> the update Kernel drivers for better Docker support. > > > >That is the final advice. :-) > > > >Docker is for Linux, Jails is for FreeBSD. It's somewhat comparable > >to a "pre-packaged VM image", more or less (probably less). > > > >Oh, and doing things like > > > > # wget http://getsomething.example.com | sudo bash > > > >is definitely _not_ the way you want to install software on > >FreeBSD. > >It rather seems to be a new Linuxism that has emerged during the > >recent years. :-) > > > > > > > >-- > >Polytropon > >Magdeburg, Germany > >Happy FreeBSD user since 4.0 > >Andra moi ennepe, Mousa, ... > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 03:15:43 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 2A1BBD4E for ; Thu, 11 Jun 2015 03:15:43 +0000 (UTC) (envelope-from FreeBSD@shaneware.biz) Received: from ipmail05.adl6.internode.on.net (ipmail05.adl6.internode.on.net [150.101.137.143]) by mx1.freebsd.org (Postfix) with ESMTP id AB3F51E14 for ; Thu, 11 Jun 2015 03:15:42 +0000 (UTC) (envelope-from FreeBSD@shaneware.biz) Received: from ppp118-210-45-229.lns20.adl2.internode.on.net (HELO leader.local) ([118.210.45.229]) by ipmail05.adl6.internode.on.net with ESMTP; 11 Jun 2015 12:40:32 +0930 Message-ID: <5578FC23.4040108@ShaneWare.Biz> Date: Thu, 11 Jun 2015 12:40:27 +0930 From: Shane Ambler User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: Outback Dingo , opendaddy@hushmail.com CC: Jason Cox , Polytropon , FreeBSD Mailing List Subject: Re: FreeBSD and Docker References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <20150610234743.6A722C0487@smtp.hushmail.com> In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 03:15:43 -0000 On 11/06/2015 09:21, Outback Dingo wrote: > On Thu, Jun 11, 2015 at 9:47 AM, wrote: > >> Hello everyone! >> >> Thanks a lot for your input. >> >> Any chance I could use something like overlayfs / zfs like the author >> claims? >> >> >> https://meta.discourse.org/t/is-there-any-way-to-install-discourse-without-docker/16977 >> >> Do sign up and give your feedback. There used to be a FreeBSD thread @ >> meta.discourse.org but it just got deleted. >> >> Many thanks! >> >> > You might want to look at iocage, or jetpack > > https://github.com/3ofcoins/jetpack > https://github.com/iocage/iocage > https://github.com/pr1ntf/iohyve I haven't looked at those but zocker is an attempt at a docker style functionality on freebsd - https://github.com/toddnni/zocker I would start with the discourse source and create a port for it https://github.com/discourse/discourse -- FreeBSD - the place to B...Software Developing Shane Ambler From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 08:13:32 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 18919383 for ; Thu, 11 Jun 2015 08:13:32 +0000 (UTC) (envelope-from timp87@gmail.com) Received: from mbob.nabble.com (mbob.nabble.com [162.253.133.15]) by mx1.freebsd.org (Postfix) with ESMTP id 0441A181D for ; Thu, 11 Jun 2015 08:13:31 +0000 (UTC) (envelope-from timp87@gmail.com) Received: from msam.nabble.com (unknown [162.253.133.85]) by mbob.nabble.com (Postfix) with ESMTP id 0AE4CEB9E64 for ; Thu, 11 Jun 2015 01:04:36 -0700 (PDT) Date: Thu, 11 Jun 2015 01:04:26 -0700 (MST) From: timp To: freebsd-questions@freebsd.org Message-ID: <1434009866089-6017811.post@n5.nabble.com> In-Reply-To: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> Subject: Re: Squid 3.5.5 Port Update, with SSL MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 08:13:32 -0000 Hi! You could create a bug report at least ;) -- View this message in context: http://freebsd.1045724.n5.nabble.com/Squid-3-5-5-Port-Update-with-SSL-tp6017657p6017811.html Sent from the freebsd-questions mailing list archive at Nabble.com. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 08:22:26 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 9893D4CB for ; Thu, 11 Jun 2015 08:22:26 +0000 (UTC) (envelope-from timp87@gmail.com) Received: from mbob.nabble.com (mbob.nabble.com [162.253.133.15]) by mx1.freebsd.org (Postfix) with ESMTP id 8430A1A5C for ; Thu, 11 Jun 2015 08:22:26 +0000 (UTC) (envelope-from timp87@gmail.com) Received: from msam.nabble.com (unknown [162.253.133.85]) by mbob.nabble.com (Postfix) with ESMTP id 0F480EBA241 for ; Thu, 11 Jun 2015 01:22:36 -0700 (PDT) Date: Thu, 11 Jun 2015 01:22:26 -0700 (MST) From: timp To: freebsd-questions@freebsd.org Message-ID: <1434010946089-6017812.post@n5.nabble.com> In-Reply-To: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> Subject: Re: Squid 3.5.5 Port Update, with SSL MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 08:22:26 -0000 Uninstall your openssl from ports and try again. Looks like squid takes parts of openssl from base, and parts of it from ports version if it's installed. -- View this message in context: http://freebsd.1045724.n5.nabble.com/Squid-3-5-5-Port-Update-with-SSL-tp6017657p6017812.html Sent from the freebsd-questions mailing list archive at Nabble.com. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 09:33:15 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 82CEBE92 for ; Thu, 11 Jun 2015 09:33:15 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a114.g.dreamhost.com (sub5.mail.dreamhost.com [208.113.200.129]) by mx1.freebsd.org (Postfix) with ESMTP id 641DA1C39 for ; Thu, 11 Jun 2015 09:33:15 +0000 (UTC) (envelope-from mail@ozzmosis.com) Received: from homiemail-a114.g.dreamhost.com (localhost [127.0.0.1]) by homiemail-a114.g.dreamhost.com (Postfix) with ESMTP id 19753600CF23C; Thu, 11 Jun 2015 02:33:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=ozzmosis.com; h=date:from :to:subject:message-id:references:mime-version:content-type :in-reply-to; s=ozzmosis.com; bh=Xrzw8VVaMrrMExqLiGUl7JxsWhI=; b= PK5/gCZnuSRhhHl7Sy9SIMHW3/8QAd+qirubdS7ICxatZ4WfuCub/zx6mEQ90wOS pEet3PwxwNBem3eMM8ANQUFu8zYGoTwpR4hPbtpZ7ko3k3NI3mSLdNBMvx3i6LjZ QJCFI4GxAasEJsa/yeDy5YK9wPbmqAHi5u4iSB0lmiM= Received: from blizzard.ozzmosis.com (203-158-33-181.dyn.iinet.net.au [203.158.33.181]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: relay@ozzmosis.com) by homiemail-a114.g.dreamhost.com (Postfix) with ESMTPSA id CF16E600CF239; Thu, 11 Jun 2015 02:33:08 -0700 (PDT) Received: by blizzard.ozzmosis.com (Postfix, from userid 1001) id E30A165E; Thu, 11 Jun 2015 19:33:06 +1000 (AEST) Date: Thu, 11 Jun 2015 19:33:06 +1000 From: andrew clarke To: mayuresh@kathe.in, freebsd-questions@freebsd.org Subject: Re: swift under freebsd? Message-ID: <20150611093306.GA44454@ozzmosis.com> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> <20150609113827.GA80013@ozzmosis.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20150609113827.GA80013@ozzmosis.com> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 09:33:15 -0000 On Tue 2015-06-09 21:38:27 UTC+1000, andrew clarke (mail@ozzmosis.com) wrote: > > hi, in case someone missed it, there's been an announcement that apple's > > swift will be open sourced soon. > > they are going pretty much full-out, even the libraries are going to get > > open sourced along with the compiler. > > in that case, would freebsd import support for swift within the base > > system in the near future? > > I think it would only end up in the FreeBSD base system if a > particular program in base required it. However the general trend over > the years has been to remove dependencies from base (Perl, Ruby) > rather than add more. > > ObjC support is in base more by coincidence, because clang is required > to build the base system in FreeBSD 10.0 and newer, and clang includes > ObjC support. clang will never build Swift apps, though. Actually on further investigation, while Clang might support the ObjC syntax, none of the ObjC libraries are available in FreeBSD base. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 09:35:03 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 98B9EF4F for ; Thu, 11 Jun 2015 09:35:03 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from outbound.ifdnrg.com (outbound.ifdnrg.com [193.200.98.38]) by mx1.freebsd.org (Postfix) with ESMTP id 047541C5D for ; Thu, 11 Jun 2015 09:35:02 +0000 (UTC) (envelope-from paul@ifdnrg.com) Received: from [192.168.100.230] (cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56]) (authenticated bits=0) by outbound.ifdnrg.com (8.15.1/8.14.9) with ESMTPSA id t5B9YnSJ016887 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Thu, 11 Jun 2015 10:34:53 +0100 (BST) (envelope-from paul@ifdnrg.com) X-Authentication-Warning: outbound.ifdnrg.com: Host cpc72297-sgyl28-2-0-cust55.18-2.cable.virginm.net [81.98.112.56] claimed to be [192.168.100.230] Message-ID: <5579563A.4000105@ifdnrg.com> Date: Thu, 11 Jun 2015 10:34:50 +0100 From: Paul Macdonald User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: r220's with serial References: <55773D18.3060804@ifdnrg.com> <55774063.4050306@ifdnrg.com> <55774A1A.6030600@ifdnrg.com> <557751B9.3080706@ifdnrg.com> <55786468.80408@ifdnrg.com> In-Reply-To: <55786468.80408@ifdnrg.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 09:35:03 -0000 On 10/06/2015 17:23, Paul Macdonald wrote: > > > On 09/06/2015 21:51, Paul Macdonald wrote: >> >> On 09/06/2015 21:18, Paul Macdonald wrote: >>> >>> uart0 not seen in dmesg which i think is def related: >>> >> >> Is the issue is a lack of a an appropriate serial driver in 10.1 for >> dell r220's? >> >> (serial is fine till OS boot and login should be shown) >> >> > > centOS find's ttyS0 and ttyS1 fine on this box (dell r220) > > Under FreeBSD 10-1 uart0 is not found (dmesg or under /dev) > > uart1 is found as per: > > Jun 10 12:25:14 asd kernel: uart1: <16550 or compatible> port > 0x2f8-0x2ff irq 3 on acpi0 > > Paul. > > with boot_verbose =YES i see the following uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: fast interrupt uart: uart1 already exists; skipping it uart0 failed to probe at port 0x3f8 irq 4 on isa0 Full dmesg Table 'FACP' at 0x95ff7000 Table 'UEFI' at 0x95ffd000 Table 'UEFI' at 0x95ffc000 Table 'ASF!' at 0x95ffb000 Table 'ASPT' at 0x95ffa000 Table 'BOOT' at 0x95ff9000 Table 'DBGP' at 0x95ff8000 Table 'HPET' at 0x95ff6000 Table 'APIC' at 0x95ff5000 APIC: Found table at 0x95ff5000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 3: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 4: enabled SMP: Added CPU 3 (AP) MADT: Found CPU APIC ID 4 ACPI ID 5: enabled SMP: Added CPU 4 (AP) MADT: Found CPU APIC ID 5 ACPI ID 6: enabled SMP: Added CPU 5 (AP) MADT: Found CPU APIC ID 6 ACPI ID 7: enabled SMP: Added CPU 6 (AP) MADT: Found CPU APIC ID 7 ACPI ID 8: enabled SMP: Added CPU 7 (AP) Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81a34000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81a34d38. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81a35460. Calibrating TSC clock ... TSC clock: 3491986424 Hz CPU: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz (3491.99-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306c3 Family = 0x6 Model = 0x3c Stepping = 3 Features=0xbfebfbff Features2=0x7ffafbff,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800 AMD Features2=0x21 Standard Extended Features=0x27ab TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) Physical memory chunk(s): 0x0000000000010000 - 0x000000000009afff, 569344 bytes (139 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000001a5b000 - 0x000000009573efff, 2479767552 bytes (605412 pages) 0x0000000095fff000 - 0x0000000095ffffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x0000000443790fff, 14016909312 bytes (3422097 pages) avail memory = 16395362304 (15635 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target INTR: Adding local APIC 4 as a target INTR: Adding local APIC 5 as a target INTR: Adding local APIC 6 as a target INTR: Adding local APIC 7 as a target FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 APIC: CPU 4 has ACPI ID 5 APIC: CPU 5 has ACPI ID 6 APIC: CPU 6 has ACPI ID 7 APIC: CPU 7 has ACPI ID 8 XEN: CPU 0 has VCPU ID 1 XEN: CPU 1 has VCPU ID 2 XEN: CPU 2 has VCPU ID 3 XEN: CPU 3 has VCPU ID 4 XEN: CPU 4 has VCPU ID 5 XEN: CPU 5 has VCPU ID 6 XEN: CPU 6 has VCPU ID 7 XEN: CPU 7 has VCPU ID 8 lapic0: CMCI unmasked x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 x86bios: SSEG 0x09a000-0x09afff at 0xfffffe044b596000 x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ULE: setup cpu 4 ULE: setup cpu 5 ULE: setup cpu 6 ULE: setup cpu 7 ACPI: RSDP 0xfe020 00024 (v02 DELL ) ACPI: XSDT 0x95fcf188 000E4 (v01 DELL PE_SC3 00000001 01000013) ACPI: FACP 0x95ff7000 0010C (v05 DELL PE_SC3 00000001 DELL 00040000) ACPI: DSDT 0x95fdf000 12335 (v01 DELL PE_SC3 00000000 DELL 00040000) ACPI: FACS 0x95fbd000 00040 ACPI: UEFI 0x95ffd000 00236 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: UEFI 0x95ffc000 00042 (v01 DELL PE_SC3 00000000 DELL 00040000) ACPI: ASF! 0x95ffb000 000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) ACPI: ASPT 0x95ffa000 00034 (v07 DELL PE_SC3 00000001 DELL 00040000) ACPI: BOOT 0x95ff9000 00028 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: DBGP 0x95ff8000 00034 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: HPET 0x95ff6000 00038 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: APIC 0x95ff5000 00092 (v03 DELL PE_SC3 00000001 DELL 00040000) ACPI: MCFG 0x95ff4000 0003C (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: SLIC 0x95ff3000 00176 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: SSDT 0x95fdc000 02028 (v01 DELL PE_SC3 00001000 DELL 00040000) ACPI: SPMI 0x95fda000 00040 (v05 DELL PE_SC3 00000001 DELL 00040000) ACPI: SSDT 0x95fd9000 00533 (v01 DELL PE_SC3 00003000 DELL 00040000) ACPI: SSDT 0x95fd8000 00ACE (v01 DELL PE_SC3 00003000 DELL 00040000) ACPI: SSDT 0x95fd4000 03492 (v01 DELL PE_SC3 00003000 DELL 00040000) ACPI: SPCR 0x95ff2000 00050 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: DMAR 0x95fd3000 00080 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: SSDT 0x95fd2000 00514 (v01 DELL PE_SC3 00001000 DELL 00040000) ACPI: FPDT 0x95fd1000 00044 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: HEST 0x95fd0000 000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: ERST 0x95fce000 00230 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: BERT 0x95fcd000 00030 (v01 DELL PE_SC3 00000001 DELL 00040000) ACPI: EINJ 0x95fcc000 00150 (v01 DELL PE_SC3 00000001 DELL 00040000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present null: nfslock: pseudo-device Falling back to random adaptor random: initialized VESA: INT 0x10 vector 0xc000:0x0b60 VESA: information block 0000 56 45 53 41 00 03 c6 57 00 c0 01 00 00 00 31 54 0010 00 c0 00 01 09 03 db 57 00 c0 e2 57 00 c0 eb 57 0020 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 4d 61 74 72 6f 78 00 4d 47 41 2d 47 32 30 30 00 0110 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 22 mode(s) found VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffff800000c5431 (c0005431) VESA: Matrox Graphics Inc. VESA: Matrox MGA-G200 00 io: VMBUS: load kbd: new array size 4 kbd1 at kbdmux0 mem: hptnr: R750/DC7280 controller driver v1.0 hpt27xx: RocketRAID 27xx controller driver v1.1 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard ACPI: All ACPI Tables successfully acquired PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0 cpu0: on acpi0 ACPI: SSDT 0x95aaac18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1 cpu1: on acpi0 ACPI: SSDT 0x95aaa618 005AA (v01 PmRef ApIst 00003000 INTL 20120816) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 005AA (v01 PmRef ApIst 00003000 INTL 20120816) ACPI: SSDT 0x95aa9d98 00119 (v01 PmRef ApCst 00003000 INTL 20120816) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00119 (v01 PmRef ApCst 00003000 INTL 20120816) cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2 cpu2: on acpi0 cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3 cpu3: on acpi0 cpu4: Processor \134_PR_.CPU4 (ACPI ID 5) -> APIC ID 4 cpu4: on acpi0 cpu5: Processor \134_PR_.CPU5 (ACPI ID 6) -> APIC ID 5 cpu5: on acpi0 cpu6: Processor \134_PR_.CPU6 (ACPI ID 7) -> APIC ID 6 cpu6: on acpi0 cpu7: Processor \134_PR_.CPU7 (ACPI ID 8) -> APIC ID 7 cpu7: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic hpet0: t1: irqs 0x00f00000 (0), MSI hpet0: t2: irqs 0x00f00800 (0), MSI hpet0: t3: irqs 0x00f01000 (0), MSI hpet0: t4: irqs 0x00000000 (0), MSI hpet0: t5: irqs 0x00000000 (0), MSI hpet0: t6: irqs 0x00000000 (0), MSI hpet0: t7: irqs 0x00000000 (0), MSI Timecounter "HPET" frequency 14318180 Hz quality 950 msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 Event timer "i8254" frequency 1193182 Hz quality 100 ACPI timer: 1/1 1/1 1/2 1/2 1/2 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pcib0: port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xa0000000-0xfeafffff pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x0c08, revid=0x06 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x8c31, revid=0x05 domain=0, bus=0, slot=20, func=0 class=0c-03-30, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xa2b00000, size 16, enabled pcib0: allocated type 3 (0xa2b00000-0xa2b0ffff) for rid 10 of pci0:0:20:0 pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x8c2d, revid=0x05 domain=0, bus=0, slot=26, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xa2b12000, size 10, enabled pcib0: allocated type 3 (0xa2b12000-0xa2b123ff) for rid 10 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x8c10, revid=0xd5 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x8c14, revid=0xd5 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x8c26, revid=0x05 domain=0, bus=0, slot=29, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xa2b11000, size 10, enabled pcib0: allocated type 3 (0xa2b11000-0xa2b113ff) for rid 10 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x8c52, revid=0x05 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x8c02, revid=0x05 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x3048, size 3, enabled pcib0: allocated type 4 (0x3048-0x304f) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x3054, size 2, enabled pcib0: allocated type 4 (0x3054-0x3057) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x3040, size 3, enabled pcib0: allocated type 4 (0x3040-0x3047) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x3050, size 2, enabled pcib0: allocated type 4 (0x3050-0x3053) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xa2b10000, size 11, enabled pcib0: allocated type 3 (0xa2b10000-0xa2b107ff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x8c22, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 64, base 0xa2b13000, size 8, enabled pcib0: allocated type 3 (0xa2b13000-0xa2b130ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 xhci0: mem 0xa2b00000-0xa2b0ffff irq 16 at device 20.0 on pci0 xhci0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 264 to local APIC 0 vector 59 xhci0: using IRQ 264 for MSI xhci0: MSI enabled usbus0: waiting for BIOS to give up control xhci0: 32 byte context size. xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 xhci0: usbpf: Attached ehci0: mem 0xa2b12000-0xa2b123ff irq 16 at device 26.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 60 usbus1: EHCI version 1.0 usbus1 on ehci0 ehci0: usbpf: Attached pcib1: irq 16 at device 28.0 on pci0 pcib0: allocated type 3 (0xa2a00000-0xa2afffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: prefetched decode 0xa2a00000-0xa2afffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit MSI-X supports 17 messages in map 0x20 map[10]: type Prefetchable Memory, range 64, base 0xa2a30000, size 16, enabled pcib1: allocated prefetch range (0xa2a30000-0xa2a3ffff) for rid 10 of pci0:1:0:0 map[18]: type Prefetchable Memory, range 64, base 0xa2a40000, size 16, enabled pcib1: allocated prefetch range (0xa2a40000-0xa2a4ffff) for rid 18 of pci0:1:0:0 map[20]: type Prefetchable Memory, range 64, base 0xa2a50000, size 16, enabled pcib1: allocated prefetch range (0xa2a50000-0xa2a5ffff) for rid 20 of pci0:1:0:0 pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=1, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit MSI-X supports 17 messages in map 0x20 map[10]: type Prefetchable Memory, range 64, base 0xa2a00000, size 16, enabled pcib1: allocated prefetch range (0xa2a00000-0xa2a0ffff) for rid 10 of pci0:1:0:1 map[18]: type Prefetchable Memory, range 64, base 0xa2a10000, size 16, enabled pcib1: allocated prefetch range (0xa2a10000-0xa2a1ffff) for rid 18 of pci0:1:0:1 map[20]: type Prefetchable Memory, range 64, base 0xa2a20000, size 16, enabled pcib1: allocated prefetch range (0xa2a20000-0xa2a2ffff) for rid 20 of pci0:1:0:1 pcib1: matched entry for 1.0.INTB pcib1: slot 0 INTB hardwired to IRQ 17 bge0: mem 0xa2a30000-0xa2a3ffff,0xa2a40000-0xa2a4ffff,0xa2a50000-0xa2a5ffff irq 16 at device 0.0 on pci1 bge0: APE FW version: NCSI v1.3.7.0 bge0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 265 to local APIC 0 vector 61 bge0: using IRQ 265 for MSI bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E bge0: Disabling fastboot miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x001be9, model 0x0036, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 54:9f:35:23:a9:8a bge1: mem 0xa2a00000-0xa2a0ffff,0xa2a10000-0xa2a1ffff,0xa2a20000-0xa2a2ffff irq 17 at device 0.1 on pci1 bge1: APE FW version: NCSI v1.3.7.0 bge1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 266 to local APIC 0 vector 62 bge1: using IRQ 266 for MSI bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E bge1: Disabling fastboot miibus1: on bge1 brgphy1: PHY 2 on miibus1 brgphy1: OUI 0x001be9, model 0x0036, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 54:9f:35:23:a9:8c pcib2: irq 18 at device 28.2 on pci0 pcib0: allocated type 3 (0xa2000000-0xa29fffff) for rid 20 of pcib2 pcib0: allocated type 3 (0xa1000000-0xa1ffffff) for rid 24 of pcib2 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 6 pcib2: memory decode 0xa2000000-0xa29fffff pcib2: prefetched decode 0xa1000000-0xa1ffffff pcib2: special decode VGA pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x1912, dev=0x0013, revid=0x00 domain=0, bus=2, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib3: at device 0.0 on pci2 pcib2: allocated memory range (0xa2000000-0xa29fffff) for rid 20 of pcib3 pcib2: allocated prefetch range (0xa1000000-0xa1ffffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 6 pcib3: memory decode 0xa2000000-0xa29fffff pcib3: prefetched decode 0xa1000000-0xa1ffffff pcib3: special decode VGA pcib3: could not get PCI interrupt routing table for \134_SB_.PCI0.RP03.PXSX - AE_NOT_FOUND pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1912, dev=0x0013, revid=0x00 domain=0, bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x1912, dev=0x0013, revid=0x00 domain=0, bus=3, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib4: at device 0.0 on pci3 pcib3: allocated memory range (0xa2000000-0xa28fffff) for rid 20 of pcib4 pcib3: allocated prefetch range (0xa1000000-0xa1ffffff) for rid 24 of pcib4 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 5 pcib4: memory decode 0xa2000000-0xa28fffff pcib4: prefetched decode 0xa1000000-0xa1ffffff pcib4: special decode VGA pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x1912, dev=0x0012, revid=0x00 domain=0, bus=4, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib5: at device 0.0 on pci4 pcib4: allocated memory range (0xa2000000-0xa28fffff) for rid 20 of pcib5 pcib4: allocated prefetch range (0xa1000000-0xa1ffffff) for rid 24 of pcib5 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: memory decode 0xa2000000-0xa28fffff pcib5: prefetched decode 0xa1000000-0xa1ffffff pcib5: special decode VGA pci5: on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x102b, dev=0x0534, revid=0x00 domain=0, bus=5, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xa1000000, size 24, enabled pcib5: allocated prefetch range (0xa1000000-0xa1ffffff) for rid 10 of pci0:5:0:0 map[14]: type Memory, range 32, base 0xa2800000, size 14, enabled pcib5: allocated memory range (0xa2800000-0xa2803fff) for rid 14 of pci0:5:0:0 map[18]: type Memory, range 32, base 0xa2000000, size 23, enabled pcib5: allocated memory range (0xa2000000-0xa27fffff) for rid 18 of pci0:5:0:0 pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pcib3: slot 0 INTA is routed to irq 18 pcib4: slot 0 INTA is routed to irq 18 pcib5: slot 0 INTA is routed to irq 18 vgapci0: mem 0xa1000000-0xa1ffffff,0xa2800000-0xa2803fff,0xa2000000-0xa27fffff irq 18 at device 0.0 on pci5 vgapci0: Boot video device pcib6: at device 1.0 on pci3 pcib3: allocated memory range (0xa2900000-0xa29fffff) for rid 20 of pcib6 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: memory decode 0xa2900000-0xa29fffff pci6: on pcib6 pci6: domain=0, physical bus=6 found-> vendor=0x1912, dev=0x0011, revid=0x00 domain=0, bus=6, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xa2901000, size 12, enabled pcib6: allocated memory range (0xa2901000-0xa2901fff) for rid 10 of pci0:6:0:0 map[14]: type Memory, range 32, base 0xa2900000, size 7, enabled pcib6: allocated memory range (0xa2900000-0xa290007f) for rid 14 of pci0:6:0:0 pcib2: matched entry for 2.0.INTB pcib2: slot 0 INTB hardwired to IRQ 19 pcib3: slot 1 INTA is routed to irq 19 pcib6: slot 0 INTA is routed to irq 19 pci6: at device 0.0 (no driver attached) ehci1: mem 0xa2b11000-0xa2b113ff irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 63 usbus2: EHCI version 1.0 usbus2 on ehci1 ehci1: usbpf: Attached isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x3048-0x304f,0x3054-0x3057,0x3040-0x3047,0x3050-0x3053,0x3020-0x303f mem 0xa2b10000-0xa2b107ff irq 19 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 267 to local APIC 0 vector 64 ahci0: using IRQ 267 for MSI ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SS AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports ahci0: Caps2: APST ahcich0: at channel 0 on ahci0 ahcich0: Caps: ahcich1: not probed (disabled) ahcich2: not probed (disabled) ahcich3: not probed (disabled) ahcich4: at channel 4 on ahci0 ahcich4: Caps: ahcich5: at channel 5 on ahci0 ahcich5: Caps: ESP ahciem0: on ahci0 ahciem0: Caps: ALHD XMT SMB LED pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 battery0: on acpi0 battery1: on acpi0 battery2: on acpi0 ppc1: cannot reserve I/O port range uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 65 uart1: fast interrupt ACPI: Enabled 7 GPEs in block 00 to 3F acpi0: wakeup code va 0xfffffe045d873000 pa 0x90000 ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed ex_isa_identify() pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 atkbdc0: AT keyboard controller not found atkbdc0 failed to probe at port 0x60,0x64 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 est2: on cpu2 p4tcc2: on cpu2 est3: on cpu3 p4tcc3: on cpu3 est4: on cpu4 p4tcc4: on cpu4 est5: on cpu5 p4tcc5: on cpu5 est6: on cpu6 p4tcc6: on cpu6 est7: on cpu7 p4tcc7: on cpu7 Device configuration finished. procfs registered ZFS filesystem version: 5 ZFS storage pool version: features support (5000) lapic: Divisor 2, Frequency 49885523 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072 lo0: bpf attached hptnr: no controller detected. hpt27xx: no controller detected. hptrr: no controller detected. random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 acpi_tz0: switched from NONE to _AC2: 27.8C ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000133 ahcich0: AHCI reset: device found ahcich4: AHCI reset... ahcich4: SATA connect time=1000us status=00000113 ahcich4: AHCI reset: device found ahcich4: AHCI reset: device ready after 0ms ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen2.1: at usbus2 uhub1: on usbus2 ugen1.1: at usbus1 uhub2: on usbus1 ahcich5: AHCI reset... ahcich4: SNTF 0x0001 ahcich5: SATA connect timeout time=10000us status=00000000 ahcich5: AHCI reset: device not found battery0: battery initialization start battery1: battery initialization start battery2: battery initialization start ahcich4: SNTF 0x0001 ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): Retrying command (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-9 SATA 3.x device pass0: Serial Number 14270C821763 pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ahcich4 bus 0 scbus1 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: Serial Number MTT6M7363953J63RGA01 pass1: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) pass2 at ahciem0 bus 0 scbus3 target 0 lun 0 pass2: SEMB S-E-S 2.00 device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-9 SATA 3.x device ada0: Serial Number 14270C821763 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 457862MB (937703088 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ses0: Generation Code 0x0 has 1 SubEnclosures ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8 ses0: WWN: 0 ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: GEOM: new disk ada0 GEOM: new disk cd0 cd0 at ahcich4 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: Serial Number MTT6M7363953J63RGA01 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open ahcich4: SNTF 0x0001 Netvsc initializing... lapic6: CMCI unmasked lapic7: CMCI unmasked lapic5: CMCI unmasked lapic4: CMCI unmasked lapic3: CMCI unmasked lapic2: CMCI unmasked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000100f2 SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x07000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 3 vector 48 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 4 vector 48 msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49 msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49 msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49 msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 49 msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 48 msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 48 msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48 msi: Assigning MSI IRQ 264 to local APIC 5 vector 49 msi: Assigning MSI IRQ 265 to local APIC 6 vector 49 msi: Assigning MSI IRQ 266 to local APIC 7 vector 49 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) Timecounter "TSC-low" frequency 1745993212 Hz quality 1000 Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 17 ports with 17 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 xhci0: Port routing mask set to 0x00000000 usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored) ugen0.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device ugen2.2: at usbus2 uhub3: on usbus2 ugen1.2: at usbus1 uhub4: on usbus1 uhub4: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus2 usbus1 ugen2.3: at usbus2 ukbd0: on usbus2 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x3d0000 ugen1.3: at usbus1 ugen2.4: at usbus2 uhub5: on usbus2 Root mount waiting for: usbus2 usbus1 uhub5: 6 ports with 6 removable, self powered ugen1.4: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4100 umass0:4:0:-1: Attached to scbus4 pass3 at umass-sim0 bus 0 scbus4 target 0 lun 0 pass3: Removable Direct Access SCSI-4 device pass3: Serial Number 20140111083412156E5A pass3: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: Removable Direct Access SCSI-4 device da0: Serial Number 20140111083412156E5A da0: 40.000MB/s transfers da0: 29926MB (61288448 512 byte sectors: 255H 63S/T 3815C) da0: quirks=0x2 da0: Delete methods: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported. ugen2.5: at usbus2 ukbd1: on usbus2 kbd2 at ukbd1 kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000 Trying to mount root from zfs:zroot/ROOT/default []... start_init: trying /sbin/init bge0: Disabling fastboot bge0: Disabling fastboot ums0: on usbus2 ums1: on usbus1 ums0: 3 buttons and [Z] coordinates ID=0 ums2: on usbus2 ums2: 3 buttons and [XYZ] coordinates ID=0 ums1: 3 buttons and [XYZ] coordinates ID=0 > > -- ------------------------- Paul Macdonald IFDNRG Ltd Web and video hosting ------------------------- t: 0131 5548070 m: 07970339546 e: paul@ifdnrg.com w: http://www.ifdnrg.com ------------------------- IFDNRG 40 Maritime Street Edinburgh EH6 6SA ---------------------------------------------------- High Specification Dedicated Servers from £100.00pm ---------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 09:39:07 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 236F72D6 for ; Thu, 11 Jun 2015 09:39:07 +0000 (UTC) (envelope-from iam@ardiefox.me) Received: from out4-smtp.messagingengine.com (out4-smtp.messagingengine.com [66.111.4.28]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E37E51CB1 for ; Thu, 11 Jun 2015 09:39:06 +0000 (UTC) (envelope-from iam@ardiefox.me) Received: from compute6.internal (compute6.nyi.internal [10.202.2.46]) by mailout.nyi.internal (Postfix) with ESMTP id 6BCC420D2A for ; Thu, 11 Jun 2015 05:38:59 -0400 (EDT) Received: from frontend1 ([10.202.2.160]) by compute6.internal (MEProxy); Thu, 11 Jun 2015 05:38:59 -0400 DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; d=ardiefox.me; h=cc :content-type:date:from:in-reply-to:message-id:mime-version :references:subject:to:x-sasl-enc:x-sasl-enc; s=mesmtp; bh=BhxDH WK/OuQUkEf9qwn1STqH904=; b=bHTRDMPegKvL2J9+vXNwimmUs57vpA6KG8f2u fvi5E7gXyImcjSnsC1Woz7VeaLzrZFhvKlJcgmyyZ5pprY9O5TVAcT4ay5Yb+qQY ckQIv0NukVemXgQR9djJi/2hfU7uRnR6eSP1yT7RhNlXBEuSMGIVYGoay5mOoG2+ gGpXPI= DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; d= messagingengine.com; h=cc:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to:x-sasl-enc :x-sasl-enc; s=smtpout; bh=BhxDHWK/OuQUkEf9qwn1STqH904=; b=f2nxE zegPaFlqwt326pos8n256HmNjWUKRwnaRaKTiqGbM98mwlQoMo8YZpve/uHRXMbM aGsqrxpyi+BsbrZ9K3pNrZL0cRAFJ9Eaxcig0T6XzuxFlJ7j6nqHgg6XjDdq61yt HINaJRm++9SNABZOkWVG94nYjVu84uQNNej6Yk= X-Sasl-enc: 0e5ObKPLFAFZnEpgXU238c+D3GMw7YdgRvXIiY4+aO01 1434015538 Received: from [192.168.1.59] (unknown [165.194.27.163]) by mail.messagingengine.com (Postfix) with ESMTPA id 0DD71C0001F; Thu, 11 Jun 2015 05:38:57 -0400 (EDT) Content-Type: multipart/signed; boundary="Apple-Mail=_647180F2-F313-435B-B22B-38AE489316D3"; protocol="application/pkcs7-signature"; micalg=sha1 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2098\)) Subject: Re: swift under freebsd? From: "Ardie H. Hwang" In-Reply-To: <20150611093306.GA44454@ozzmosis.com> Date: Thu, 11 Jun 2015 18:38:55 +0900 Cc: mayuresh@kathe.in, freebsd-questions@freebsd.org Message-Id: <13DC6BF2-F4D6-4EEC-9614-52068381A7FD@ardiefox.me> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> <20150609113827.GA80013@ozzmosis.com> <20150611093306.GA44454@ozzmosis.com> To: andrew clarke X-Mailer: Apple Mail (2.2098) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 09:39:07 -0000 --Apple-Mail=_647180F2-F313-435B-B22B-38AE489316D3 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii One can use devel/gnustep port if needed; not 100% compatible with = latest Cocoa framework, but is quite mature AFAIK. Also notable: http://cocotron.org/ -- Ardie H. Hwang ---------------- email: iam@ardiefox.me mobile: +82-10-I-AM-ARDIE > On Jun 11, 2015, at 18:33, andrew clarke wrote: >=20 > On Tue 2015-06-09 21:38:27 UTC+1000, andrew clarke (mail@ozzmosis.com) = wrote: >=20 >>> hi, in case someone missed it, there's been an announcement that = apple's=20 >>> swift will be open sourced soon. >>> they are going pretty much full-out, even the libraries are going to = get=20 >>> open sourced along with the compiler. >>> in that case, would freebsd import support for swift within the base=20= >>> system in the near future? >>=20 >> I think it would only end up in the FreeBSD base system if a >> particular program in base required it. However the general trend = over >> the years has been to remove dependencies from base (Perl, Ruby) >> rather than add more. >>=20 >> ObjC support is in base more by coincidence, because clang is = required >> to build the base system in FreeBSD 10.0 and newer, and clang = includes >> ObjC support. clang will never build Swift apps, though. >=20 > Actually on further investigation, while Clang might support the ObjC > syntax, none of the ObjC libraries are available in FreeBSD base. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" --Apple-Mail=_647180F2-F313-435B-B22B-38AE489316D3 Content-Disposition: attachment; filename=smime.p7s Content-Type: application/pkcs7-signature; name=smime.p7s Content-Transfer-Encoding: base64 MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIMVzCCBhsw ggUDoAMCAQICAw2NljANBgkqhkiG9w0BAQsFADCBjDELMAkGA1UEBhMCSUwxFjAUBgNVBAoTDVN0 YXJ0Q29tIEx0ZC4xKzApBgNVBAsTIlNlY3VyZSBEaWdpdGFsIENlcnRpZmljYXRlIFNpZ25pbmcx ODA2BgNVBAMTL1N0YXJ0Q29tIENsYXNzIDEgUHJpbWFyeSBJbnRlcm1lZGlhdGUgQ2xpZW50IENB MB4XDTE1MDQwMTA1MTUyMFoXDTE2MDQwMTE0NTMxMFowOjEYMBYGA1UEAwwPaWFtQGFyZGllZm94 Lm1lMR4wHAYJKoZIhvcNAQkBFg9pYW1AYXJkaWVmb3gubWUwggEiMA0GCSqGSIb3DQEBAQUAA4IB DwAwggEKAoIBAQDX7DM3FaYKaYp2sZObkwoql9SJpe2gQI2I0eJM7fB7UokCnaNeiz7Leptzu/jw Ug6mes6NhsbSFrsMQuV/fBQVSA8SqX2yPVfvhL3iwgk7ZU2C7i8E5h0qQJ0bjNRmasZ7brEd2PJT lN2O0Qbrm7DLBd3bXLUkPbBXC3/mRIZB6Oube+kx3a4WBeY8exUSOncM89d/GM0a+/8Rq/WO/ZtW 7E/iys1/Qh2EcDwZjVXnisvu9F2neu/TqsJQnqq56UID7v4z5YgRMUmFhc6ZZmB7yxDk7/lCqN69 c+65BxfB4bN8J9NbzjXPXCOnK+P+oqlS2FZUVmM/qZ90jbMogaevAgMBAAGjggLVMIIC0TAJBgNV HRMEAjAAMAsGA1UdDwQEAwIEsDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwQwHQYDVR0O BBYEFBiFrFodtqd6r7GQvkE2WpB+wDCeMB8GA1UdIwQYMBaAFFNy7ZKc4NrLAVx8fpY1TvLUuFGC MBoGA1UdEQQTMBGBD2lhbUBhcmRpZWZveC5tZTCCAUwGA1UdIASCAUMwggE/MIIBOwYLKwYBBAGB tTcBAgMwggEqMC4GCCsGAQUFBwIBFiJodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9wb2xpY3kucGRm MIH3BggrBgEFBQcCAjCB6jAnFiBTdGFydENvbSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTADAgEB GoG+VGhpcyBjZXJ0aWZpY2F0ZSB3YXMgaXNzdWVkIGFjY29yZGluZyB0byB0aGUgQ2xhc3MgMSBW YWxpZGF0aW9uIHJlcXVpcmVtZW50cyBvZiB0aGUgU3RhcnRDb20gQ0EgcG9saWN5LCByZWxpYW5j ZSBvbmx5IGZvciB0aGUgaW50ZW5kZWQgcHVycG9zZSBpbiBjb21wbGlhbmNlIG9mIHRoZSByZWx5 aW5nIHBhcnR5IG9ibGlnYXRpb25zLjA2BgNVHR8ELzAtMCugKaAnhiVodHRwOi8vY3JsLnN0YXJ0 c3NsLmNvbS9jcnR1MS1jcmwuY3JsMIGOBggrBgEFBQcBAQSBgTB/MDkGCCsGAQUFBzABhi1odHRw Oi8vb2NzcC5zdGFydHNzbC5jb20vc3ViL2NsYXNzMS9jbGllbnQvY2EwQgYIKwYBBQUHMAKGNmh0 dHA6Ly9haWEuc3RhcnRzc2wuY29tL2NlcnRzL3N1Yi5jbGFzczEuY2xpZW50LmNhLmNydDAjBgNV HRIEHDAahhhodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS8wDQYJKoZIhvcNAQELBQADggEBAMIHq7HX hVQpsH5Q9+BgZljuCaFAwm/igjNnESRKCAmxMEAQjfUiwzE8/XVHRqL3o87ANvhL/7l9Dif8enFI GkAm5DwL6GyR9BY7hqrky+NJ+fmoiOi/hPzP4JlRetxosyoJxWilZI3OO9daNdRKWWeeJP5bCMWa b48rKGVss9FpeY/lXuznjcYv5FHbJE6j4dKLjncZ0JPWSMFwjbKH5sduHKBqiGl+E8Pzmtz/nLsj cdOc8U49tDaxq5ns96p+l3FVfwTNBKB2D1PnPL5mynU8FDR3WGmwjcL+RTVq7ybPi14AIBCOZ6LP bOGgZNpLG/LakYN3zIbXRZ5j9Jx1/QYwggY0MIIEHKADAgECAgEeMA0GCSqGSIb3DQEBBQUAMH0x CzAJBgNVBAYTAklMMRYwFAYDVQQKEw1TdGFydENvbSBMdGQuMSswKQYDVQQLEyJTZWN1cmUgRGln aXRhbCBDZXJ0aWZpY2F0ZSBTaWduaW5nMSkwJwYDVQQDEyBTdGFydENvbSBDZXJ0aWZpY2F0aW9u IEF1dGhvcml0eTAeFw0wNzEwMjQyMTAxNTVaFw0xNzEwMjQyMTAxNTVaMIGMMQswCQYDVQQGEwJJ TDEWMBQGA1UEChMNU3RhcnRDb20gTHRkLjErMCkGA1UECxMiU2VjdXJlIERpZ2l0YWwgQ2VydGlm aWNhdGUgU2lnbmluZzE4MDYGA1UEAxMvU3RhcnRDb20gQ2xhc3MgMSBQcmltYXJ5IEludGVybWVk aWF0ZSBDbGllbnQgQ0EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDHCYPMzi3YGrEp pC4Tq5a+ijKDjKaIQZZVR63UbxIP6uq/I0fhCu+cQhoUfE6ERKKnu8zPf1Jwuk0tsvVCk6U9b+0U jM0dLep3ZdE1gblK/1FwYT5Pipsu2yOMluLqwvsuz9/9f1+1PKHG/FaR/wpbfuIqu54qzHDYeqiU fsYzoVflR80DAC7hmJ+SmZnNTWyUGHJbBpA8Q89lGxahNvuryGaC/o2/ceD2uYDX9U8Eg5DpIpGQ dcbQeGarV04WgAUjjXX5r/2dabmtxWMZwhZna//jdiSyrrSMTGKkDiXm6/3/4ebfeZuCYKzN2P8O 2F/Xe2AC/Y7zeEsnR7FOp+uXAgMBAAGjggGtMIIBqTAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB /wQEAwIBBjAdBgNVHQ4EFgQUU3Ltkpzg2ssBXHx+ljVO8tS4UYIwHwYDVR0jBBgwFoAUTgvvGqRA W6UXaYcwyjRoQ9BBrvIwZgYIKwYBBQUHAQEEWjBYMCcGCCsGAQUFBzABhhtodHRwOi8vb2NzcC5z dGFydHNzbC5jb20vY2EwLQYIKwYBBQUHMAKGIWh0dHA6Ly93d3cuc3RhcnRzc2wuY29tL3Nmc2Nh LmNydDBbBgNVHR8EVDBSMCegJaAjhiFodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9zZnNjYS5jcmww J6AloCOGIWh0dHA6Ly9jcmwuc3RhcnRzc2wuY29tL3Nmc2NhLmNybDCBgAYDVR0gBHkwdzB1Bgsr BgEEAYG1NwECATBmMC4GCCsGAQUFBwIBFiJodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9wb2xpY3ku cGRmMDQGCCsGAQUFBwIBFihodHRwOi8vd3d3LnN0YXJ0c3NsLmNvbS9pbnRlcm1lZGlhdGUucGRm MA0GCSqGSIb3DQEBBQUAA4ICAQAKgwh9eKssBly4Y4xerhy5I3dNoXHYfYa8PlVLL/qtXnkFgdtY 1o95CfegFJTwqBBmf8pyTUnFsukDFUI22zF5bVHzuJ+GxhnSqN2sD1qetbYwBYK2iyYA5Pg7Er1A +hKMIzEzcduRkIMmCeUTyMyikfbUFvIBivtvkR8ZFAk22BZy+pJfAoedO61HTz4qSfQoCRcLN5A0 t4DkuVhTMXIzuQ8CnykhExD6x4e6ebIbrjZLb7L+ocR0y4YjCl/Pd4MXU91y0vTipgr/O75CDUHD RHCCKBVmz/Rzkc/b970MEeHt5LC3NiWTgBSvrLEuVzBKM586YoRD9Dy3OHQgWI270g+5MYA8GfgI /EPT5G7xPbCDz+zjdH89PeR3U4So4lSXur6H6vp+m9TQXPF3a0LwZrp8MQ+Z77U1uL7TelWO5lAp sbAonrqASfTpaprFVkL4nyGH+NHST2ZJPWIBk81i6Vw0ny0qZW2Niy/QvVNKbb43A43ny076khXO 7cNbBIRdJ/6qQNq9Bqb5C0Q5nEsFcj75oxQRqlKf6TcvGbjxkJh8BYtv9ePsXklAxtm8J7GCUBth HSQgepbkOexhJ0wP8imUkyiPHQ0GvEnd83129fZjoEhdGwXV27ioRKbj/cIq7JRXun0NbeY+UdMY u9jGfIpDLtUUGSgsg2zMGs5R4jGCA28wggNrAgEBMIGUMIGMMQswCQYDVQQGEwJJTDEWMBQGA1UE ChMNU3RhcnRDb20gTHRkLjErMCkGA1UECxMiU2VjdXJlIERpZ2l0YWwgQ2VydGlmaWNhdGUgU2ln bmluZzE4MDYGA1UEAxMvU3RhcnRDb20gQ2xhc3MgMSBQcmltYXJ5IEludGVybWVkaWF0ZSBDbGll bnQgQ0ECAw2NljAJBgUrDgMCGgUAoIIBrzAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqG SIb3DQEJBTEPFw0xNTA2MTEwOTM4NTVaMCMGCSqGSIb3DQEJBDEWBBTT8N2+hGMGrSR+7k17RhpJ wkLqszCBpQYJKwYBBAGCNxAEMYGXMIGUMIGMMQswCQYDVQQGEwJJTDEWMBQGA1UEChMNU3RhcnRD b20gTHRkLjErMCkGA1UECxMiU2VjdXJlIERpZ2l0YWwgQ2VydGlmaWNhdGUgU2lnbmluZzE4MDYG A1UEAxMvU3RhcnRDb20gQ2xhc3MgMSBQcmltYXJ5IEludGVybWVkaWF0ZSBDbGllbnQgQ0ECAw2N ljCBpwYLKoZIhvcNAQkQAgsxgZeggZQwgYwxCzAJBgNVBAYTAklMMRYwFAYDVQQKEw1TdGFydENv bSBMdGQuMSswKQYDVQQLEyJTZWN1cmUgRGlnaXRhbCBDZXJ0aWZpY2F0ZSBTaWduaW5nMTgwNgYD VQQDEy9TdGFydENvbSBDbGFzcyAxIFByaW1hcnkgSW50ZXJtZWRpYXRlIENsaWVudCBDQQIDDY2W MA0GCSqGSIb3DQEBAQUABIIBADOdc0qsJaat+aCkJz3cVA+FptWkmxHjJ4G0BchaaZsmVZtQ1gDf pfuvAb4bPS/ldPe8B2qOhaX82XCuGXN8kvf2ss9HifkxnsVhB0dP2VdUDMsTwLjBrLKNtU7b/ViR DBENyd06lp8RG5VDUBT+CqCRnUGWtcU5+ySP3AqSAuumg5n8TX5QfuZBEwGFxTnJHN0HOqNGLRfn jUO+iD2srMDDU9LPfZ4+OVQMSC8YM1njDAO3QrV9SnMV9HDFLfjqVjh3jh/pc55Rj3fbJTpEahAI Zf1zreuysfm/hpgk+dniOo+adnRjHo8szCJwhpfcFyssKI14sFXKggsywaucXTUAAAAAAAA= --Apple-Mail=_647180F2-F313-435B-B22B-38AE489316D3-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 10:07:15 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 7AEBD697 for ; Thu, 11 Jun 2015 10:07:15 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [IPv6:2001:4b98:c:538::198]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 3DA6C14BE for ; Thu, 11 Jun 2015 10:07:15 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter29-d.gandi.net (mfilter29-d.gandi.net [217.70.178.160]) by relay6-d.mail.gandi.net (Postfix) with ESMTP id DDA2AFB959; Thu, 11 Jun 2015 12:07:12 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter29-d.gandi.net Received: from relay6-d.mail.gandi.net ([217.70.183.198]) by mfilter29-d.gandi.net (mfilter29-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id LM+E9x5Z5by3; Thu, 11 Jun 2015 12:07:11 +0200 (CEST) X-Originating-IP: 10.58.1.146 Received: from webmail.gandi.net (unknown [10.58.1.146]) (Authenticated sender: mayuresh@kathe.in) by relay6-d.mail.gandi.net (Postfix) with ESMTPA id 44B61FB98E; Thu, 11 Jun 2015 12:07:11 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Thu, 11 Jun 2015 15:37:11 +0530 From: Mayuresh Kathe To: andrew clarke Cc: freebsd-questions@freebsd.org Subject: Re: swift under freebsd? Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: <20150611093306.GA44454@ozzmosis.com> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> <20150609113827.GA80013@ozzmosis.com> <20150611093306.GA44454@ozzmosis.com> Message-ID: X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 10:07:15 -0000 On 2015-06-11 15:03, andrew clarke wrote: > On Tue 2015-06-09 21:38:27 UTC+1000, andrew clarke (mail@ozzmosis.com) > wrote: > >> > hi, in case someone missed it, there's been an announcement that apple's >> > swift will be open sourced soon. >> > they are going pretty much full-out, even the libraries are going to get >> > open sourced along with the compiler. >> > in that case, would freebsd import support for swift within the base >> > system in the near future? >> >> I think it would only end up in the FreeBSD base system if a >> particular program in base required it. However the general trend over >> the years has been to remove dependencies from base (Perl, Ruby) >> rather than add more. >> >> ObjC support is in base more by coincidence, because clang is required >> to build the base system in FreeBSD 10.0 and newer, and clang includes >> ObjC support. clang will never build Swift apps, though. > > Actually on further investigation, while Clang might support the ObjC > syntax, none of the ObjC libraries are available in FreeBSD base. yes, i know. had played with objective-c under freebsd a while back, and getting things to work was difficult as the packages would somehow keep breaking. ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 10:11:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 9F374761 for ; Thu, 11 Jun 2015 10:11:10 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [IPv6:2001:4b98:c:538::198]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 60F8A15B7 for ; Thu, 11 Jun 2015 10:11:10 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter23-d.gandi.net (mfilter23-d.gandi.net [217.70.178.151]) by relay6-d.mail.gandi.net (Postfix) with ESMTP id 16A91FB9C6; Thu, 11 Jun 2015 12:11:09 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter23-d.gandi.net Received: from relay6-d.mail.gandi.net ([217.70.183.198]) by mfilter23-d.gandi.net (mfilter23-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id Lm0ES8kxnfOn; Thu, 11 Jun 2015 12:11:03 +0200 (CEST) X-Originating-IP: 10.58.1.146 Received: from webmail.gandi.net (unknown [10.58.1.146]) (Authenticated sender: mayuresh@kathe.in) by relay6-d.mail.gandi.net (Postfix) with ESMTPA id C7E37FB99B; Thu, 11 Jun 2015 12:11:02 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Thu, 11 Jun 2015 15:41:02 +0530 From: Mayuresh Kathe To: "Ardie H. Hwang" Cc: andrew clarke , freebsd-questions@freebsd.org Subject: Re: swift under freebsd? Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: <13DC6BF2-F4D6-4EEC-9614-52068381A7FD@ardiefox.me> References: <0e0e0498667962e412d607e2f27274d0@kathe.in> <20150609113827.GA80013@ozzmosis.com> <20150611093306.GA44454@ozzmosis.com> <13DC6BF2-F4D6-4EEC-9614-52068381A7FD@ardiefox.me> Message-ID: X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 10:11:10 -0000 yeah, that compatibility situation probably won't occur in the case of swift as apple has decided to also release their libraries in the open (along with the compiler + 'repl'). the only problem i see is that the swift libraries might somehow be dependent on cocoa's objective-c framework; in that case, things are going to get extremely painful while importing support for swift under freebsd, or for that matter any platform other than apple's. ~mayuresh On 2015-06-11 15:08, Ardie H. Hwang wrote: > One can use devel/gnustep port if needed; not 100% compatible with > latest Cocoa framework, but is quite mature AFAIK. > > Also notable: http://cocotron.org/ > > -- > Ardie H. Hwang > ---------------- > email: iam@ardiefox.me > mobile: +82-10-I-AM-ARDIE > >> On Jun 11, 2015, at 18:33, andrew clarke wrote: >> >> On Tue 2015-06-09 21:38:27 UTC+1000, andrew clarke (mail@ozzmosis.com) >> wrote: >> >>>> hi, in case someone missed it, there's been an announcement that >>>> apple's >>>> swift will be open sourced soon. >>>> they are going pretty much full-out, even the libraries are going to >>>> get >>>> open sourced along with the compiler. >>>> in that case, would freebsd import support for swift within the base >>>> system in the near future? >>> >>> I think it would only end up in the FreeBSD base system if a >>> particular program in base required it. However the general trend >>> over >>> the years has been to remove dependencies from base (Perl, Ruby) >>> rather than add more. >>> >>> ObjC support is in base more by coincidence, because clang is >>> required >>> to build the base system in FreeBSD 10.0 and newer, and clang >>> includes >>> ObjC support. clang will never build Swift apps, though. >> >> Actually on further investigation, while Clang might support the ObjC >> syntax, none of the ObjC libraries are available in FreeBSD base. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 10:52:18 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 87A849D4 for ; Thu, 11 Jun 2015 10:52:18 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [IPv6:2001:4b98:c:538::198]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 48562107D for ; Thu, 11 Jun 2015 10:52:18 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter36-d.gandi.net (mfilter36-d.gandi.net [217.70.178.167]) by relay6-d.mail.gandi.net (Postfix) with ESMTP id A344FFB9F8 for ; Thu, 11 Jun 2015 12:52:16 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter36-d.gandi.net Received: from relay6-d.mail.gandi.net ([217.70.183.198]) by mfilter36-d.gandi.net (mfilter36-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id c2hj9p0DmDXZ for ; Thu, 11 Jun 2015 12:52:15 +0200 (CEST) X-Originating-IP: 10.58.1.146 Received: from webmail.gandi.net (unknown [10.58.1.146]) (Authenticated sender: mayuresh@kathe.in) by relay6-d.mail.gandi.net (Postfix) with ESMTPA id 25EB64F18BC for ; Thu, 11 Jun 2015 12:52:15 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Thu, 11 Jun 2015 16:22:15 +0530 From: Mayuresh Kathe To: freebsd-questions@freebsd.org Subject: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in Message-ID: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 10:52:18 -0000 has anyone been successful at working with randall hyde's high level assembly toolkit under freebsd 10.x? http://www.plantation-productions.com/Webster/ claims to have a pre-built archive, but one that fails to assemble the binaries. :( ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 10:54:19 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 4C4CAA70 for ; Thu, 11 Jun 2015 10:54:19 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx02.qsc.de (mx02.qsc.de [213.148.130.14]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0EB1F1092 for ; Thu, 11 Jun 2015 10:54:18 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from r56.edvax.de (port-92-195-111-193.dynamic.qsc.de [92.195.111.193]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx02.qsc.de (Postfix) with ESMTPS id 55FB42784F; Thu, 11 Jun 2015 12:54:15 +0200 (CEST) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id t5BAsEee002180; Thu, 11 Jun 2015 12:54:14 +0200 (CEST) (envelope-from freebsd@edvax.de) Date: Thu, 11 Jun 2015 12:54:14 +0200 From: Polytropon To: che@bein.link Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker Message-Id: <20150611125414.6ec3c597.freebsd@edvax.de> In-Reply-To: <1507965.zgzlHR604A@thinkpad> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <1507965.zgzlHR604A@thinkpad> Reply-To: Polytropon Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 10:54:19 -0000 On Wed, 10 Jun 2015 22:38:33 +0300, Maxim V Filimonov wrote: > On Wednesday 10 June 2015 16:52:44 Polytropon wrote: > > On Wed, 10 Jun 2015 07:29:09 -0700, Jason Cox wrote: > > > What are you doing wrong? You are trying to run docker on FreeBSD. Docker > > > is a containerization technology built for Linux. It uses LXC (which is > > > Linux Containers) for older Kernels or docker specific bits which are now > > > part of the modern Linux kernel 3.10+. > > > > It requires too many Linuxisms which aren't part of FreeBSD's > > Linux ABI, so expecting Docker to work on FreeBSD is somehow > > wrong. > > Some guy tried to port Docker on FreeBSD, and even got it working IIRC. Well, I wouldn't say it's entirely impossible to get a Docker implementation running on FreeBSD, but probably it won't work 1:1 with all imaginable software - I conclude this from the concept of being able to run Linux applications on FreeBSD using our Linux ABI, which works for _many_ applications, but not for _all_ of them, especially not for those relying on Linux kernel mechanisms that the ABI doesn't provide a proper "translation" for. In those cases it's probably easier to use native FreeBSD solutions: install the ported application into a Jail. Yes, I know, Docker is much more than Jail in terms of functionality... Maybe related: Erich Schubert: The sad state of sysadmin in the age of containers http://www.vitavonni.de/blog/201503/2015031201-the-sad-state-of-sysadmin-in-the-age-of-containers.html > > Oh, and doing things like > > > > # wget http://getsomething.example.com | sudo bash > > > > is definitely _not_ the way you want to install software on FreeBSD. > > It rather seems to be a new Linuxism that has emerged during the > > recent years. :-) > > That's not a Linuxism; in fact, that's a "hipsterism". Oh, that's why I see this on Mac OS X related software so often! :-) > But that's another > question. Where the only answer is "more beer". :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 11:38:57 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D733388E; Thu, 11 Jun 2015 11:38:57 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.net (24-240-198-187.static.stls.mo.charter.com [24.240.198.187]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A2F581D67; Thu, 11 Jun 2015 11:38:56 +0000 (UTC) (envelope-from dweimer@dweimer.net) Received: from webmail.dweimer.local (webmail [192.168.5.2]) by webmail.dweimer.net (8.14.9/8.14.9) with ESMTP id t5BBctBc020027 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Thu, 11 Jun 2015 06:38:55 -0500 (CDT) (envelope-from dweimer@dweimer.net) Received: (from www@localhost) by webmail.dweimer.local (8.14.9/8.14.9/Submit) id t5BBcsi0020026; Thu, 11 Jun 2015 06:38:54 -0500 (CDT) (envelope-from dweimer@dweimer.net) X-Authentication-Warning: webmail.dweimer.local: www set sender to dweimer@dweimer.net using -f To: timp Subject: Re: Squid 3.5.5 Port Update, with SSL X-PHP-Script: www.dweimer.net/webmail/index.php for 192.168.5.66 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Thu, 11 Jun 2015 06:38:54 -0500 From: dweimer Cc: freebsd-questions@freebsd.org, owner-freebsd-questions@freebsd.org Organization: dweimer.net Reply-To: dweimer@dweimer.net Mail-Reply-To: dweimer@dweimer.net In-Reply-To: <1434010946089-6017812.post@n5.nabble.com> References: <92391b32d330c3cb4f474a6ccb96cdc4@dweimer.net> <1434010946089-6017812.post@n5.nabble.com> Message-ID: X-Sender: dweimer@dweimer.net User-Agent: Roundcube Webmail/1.1.2 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 11:38:57 -0000 On 06/11/2015 3:22 am, timp wrote: > Uninstall your openssl from ports and try again. > > Looks like squid takes parts of openssl from base, and parts of it from > ports version if it's installed. > > > > -- > View this message in context: > http://freebsd.1045724.n5.nabble.com/Squid-3-5-5-Port-Update-with-SSL-tp6017657p6017812.html > Sent from the freebsd-questions mailing list archive at Nabble.com. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" Just trying to see if I was missing something simple on my system before filing the bug report. Already did a fresh build of all the ports on the system including OpenSSL. After the update form FreeBSD 10.1-RELEASE-p10 to p11. Removed them all and verified /usr/local/lib, /usr/local/libdata, /usr/local/share, /usr/local/bin, and /usr/local/sbin, were all empty. Then reinstalled, back to same error. I will get captures of full build output and file a bug report with them and the make.conf settings in the next couple of hours. -- Thanks, Dean E. Weimer http://www.dweimer.net/ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 13:14:17 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 1ECED79C for ; Thu, 11 Jun 2015 13:14:17 +0000 (UTC) (envelope-from wam@hiwaay.net) Received: from fly.hiwaay.net (fly.hiwaay.net [216.180.54.1]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id DBA7518FF for ; Thu, 11 Jun 2015 13:14:16 +0000 (UTC) (envelope-from wam@hiwaay.net) Received: from kabini1.local (rbn1-216-180-76-17.adsl.hiwaay.net [216.180.76.17]) (authenticated bits=0) by fly.hiwaay.net (8.13.8/8.13.8/fly) with ESMTP id t5BDAmnN023939 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES128-SHA bits=128 verify=NO) for ; Thu, 11 Jun 2015 08:10:49 -0500 Message-ID: <557988D8.6020108@hiwaay.net> Date: Thu, 11 Jun 2015 08:17:03 -0453 From: "William A. Mahaffey III" User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 CC: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <1507965.zgzlHR604A@thinkpad> <20150611125414.6ec3c597.freebsd@edvax.de> In-Reply-To: <20150611125414.6ec3c597.freebsd@edvax.de> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 13:14:17 -0000 On 06/11/15 06:00, Polytropon wrote: > Well, I wouldn't say it's entirely impossible to get a Docker > implementation running on FreeBSD, but probably it won't work > 1:1 with all imaginable software - I conclude this from the > concept of being able to run Linux applications on FreeBSD > using our Linux ABI, which works for_many_ applications, but > not for_all_ of them, especially not for those relying on > Linux kernel mechanisms that the ABI doesn't provide a proper > "translation" for. In those cases it's probably easier to use > native FreeBSD solutions: install the ported application into > a Jail. Yes, I know, Docker is much more than Jail in terms > of functionality... > > Maybe related: > > Erich Schubert: > The sad state of sysadmin in the age of containers > > http://www.vitavonni.de/blog/201503/2015031201-the-sad-state-of-sysadmin-in-the-age-of-containers.html Hmmmmm .... interesting read. One of the reasons I am migrating to *BSD is the presumed absence of malevolent gov't involvement (*cough* SELinux *cough*), I thought the BSD's were mostly/entirely free from such, no ? -- William A. Mahaffey III ---------------------------------------------------------------------- "The M1 Garand is without doubt the finest implement of war ever devised by man." -- Gen. George S. Patton Jr. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 14:03:48 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D7595795 for ; Thu, 11 Jun 2015 14:03:48 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from smtp.infracaninophile.co.uk (smtp.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.infracaninophile.co.uk", Issuer "infracaninophile.co.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 7AF9616DF for ; Thu, 11 Jun 2015 14:03:48 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from liminal.local ([137.122.64.33]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.15.1/8.15.1) with ESMTPSA id t5BE3bx2008822 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Thu, 11 Jun 2015 15:03:38 +0100 (BST) (envelope-from matthew@FreeBSD.org) Authentication-Results: smtp.infracaninophile.co.uk; dmarc=none header.from=FreeBSD.org DKIM-Filter: OpenDKIM Filter v2.9.2 smtp.infracaninophile.co.uk t5BE3bx2008822 Authentication-Results: smtp.infracaninophile.co.uk/t5BE3bx2008822; dkim=none reason="no signature"; dkim-adsp=none; dkim-atps=neutral X-Authentication-Warning: lucid-nonsense.infracaninophile.co.uk: Host [137.122.64.33] claimed to be liminal.local Message-ID: <55799538.2000009@FreeBSD.org> Date: Thu, 11 Jun 2015 10:03:36 -0400 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <1507965.zgzlHR604A@thinkpad> <20150611125414.6ec3c597.freebsd@edvax.de> <557988D8.6020108@hiwaay.net> In-Reply-To: <557988D8.6020108@hiwaay.net> Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="KE9s7eXoE9a60K03THxp3KJL4wcwnvMpX" X-Virus-Scanned: clamav-milter 0.98.7 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.8 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham autolearn_force=no version=3.4.1 X-Spam-Checker-Version: SpamAssassin 3.4.1 (2015-04-28) on lucid-nonsense.infracaninophile.co.uk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 14:03:49 -0000 This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --KE9s7eXoE9a60K03THxp3KJL4wcwnvMpX Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable On 11/06/2015 09:10, William A. Mahaffey III wrote: > Hmmmmm .... interesting read. One of the reasons I am migrating to *BSD= > is the presumed absence of malevolent gov't involvement (*cough* SELinu= x > *cough*), I thought the BSD's were mostly/entirely free from such, no ?= Pretty sure that there aren't any NSA agents in deep cover who have managed to become FreeBSD committers -- not that I have any way of telling for sure of course. Certainly FreeBSD relies on openness as the best guarantee that the OS we're shipping is free from backdoors, trojans and the like. You've got access to the source code and the build system so you can (in principle) review everything you build and dyke out anything you don't like. Of course, it's a tall order to expect everyone to have the skills to be able to do that. Consequently, internally we're strongly advocating a culture of routine code-review before making any commits, but particularly to any sensitive areas of the kernel. Cheers, Matthew --KE9s7eXoE9a60K03THxp3KJL4wcwnvMpX Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.20 (Darwin) iQJ8BAEBCgBmBQJVeZU4XxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ2NTNBNjhCOTEzQTRFNkNGM0UxRTEzMjZC QjIzQUY1MThFMUE0MDEzAAoJELsjr1GOGkAThxQP/2zzNDaR4B/QMASFP+ILPtHn w7q5irAkMyVWnnyaC0gJLrDhY2f22cfWLl509Uzvny5H6P2w5XpQf66AyGzo0XDy 7PeGxRK6kfA8/gL9WlnKkXVncTwkUxdraQODY6H12f7/eRiwrd9UgcdAFXp0O+h/ J6G1A7nDWEY8kvdPrQkNlNzPO3B577Cdxi5vGwgWnELVr2EoT8LanyBndL6gbPSe MY9jAQtMODaAPPQsU9fAu486Zs97023JRusxQyxORzBFKoi0W0uujjcf6mWPp1gC ZcJRVucKuosVyBsp98hrWGCYDsE6wlrECTz/JuyoTusB1m0NkK1hF0z45wVTkAqM YdN9AJmc0kknCsBZruwZPDruX1TCkiKDdOdB+HNjrzXgFvjVHYaLT27QMrNZpXUf EX/Kqy4YHXg3gttDqzE2RSNf2ILny/SlwXEjFgCMmwiEjksiUwkxi9bplLtK0OVx Z/IHImOB9zHWoOsDeR260eXDoNAmFNwd1Fz/nwv/sm7bo78uMKSRMjD4N+X1V5wo QA1oCkKqxtT4uNlnVSSVzLvxonfaJhvn5bv3yYYIfrXZDCud+XNrGP/heYiwSeTO Y7NE6gUCyKEEBxp1kAKFJnFNA9Wok/vJGDoaA85s1SjuZBz25OH6hesdtjctjYww VPnFkaPauCS3huGaJDJb =xQgU -----END PGP SIGNATURE----- --KE9s7eXoE9a60K03THxp3KJL4wcwnvMpX-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 14:19:10 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B912716D; Thu, 11 Jun 2015 14:19:10 +0000 (UTC) (envelope-from galtsev@kicp.uchicago.edu) Received: from cosmo.uchicago.edu (cosmo.uchicago.edu [128.135.70.90]) by mx1.freebsd.org (Postfix) with ESMTP id 933C61A08; Thu, 11 Jun 2015 14:19:10 +0000 (UTC) (envelope-from galtsev@kicp.uchicago.edu) Received: by cosmo.uchicago.edu (Postfix, from userid 48) id 6E699CB8C9F; Thu, 11 Jun 2015 09:19:04 -0500 (CDT) Received: from 128.135.70.2 (SquirrelMail authenticated user valeri) by cosmo.uchicago.edu with HTTP; Thu, 11 Jun 2015 09:19:04 -0500 (CDT) Message-ID: <33315.128.135.70.2.1434032344.squirrel@cosmo.uchicago.edu> In-Reply-To: <55799538.2000009@FreeBSD.org> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610165244.0c6f2ed7.freebsd@edvax.de> <1507965.zgzlHR604A@thinkpad> <20150611125414.6ec3c597.freebsd@edvax.de> <557988D8.6020108@hiwaay.net> <55799538.2000009@FreeBSD.org> Date: Thu, 11 Jun 2015 09:19:04 -0500 (CDT) Subject: Re: FreeBSD and Docker From: "Valeri Galtsev" To: "Matthew Seaman" Cc: freebsd-questions@freebsd.org Reply-To: galtsev@kicp.uchicago.edu User-Agent: SquirrelMail/1.4.8-5.el5.centos.7 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 14:19:10 -0000 On Thu, June 11, 2015 9:03 am, Matthew Seaman wrote: > On 11/06/2015 09:10, William A. Mahaffey III wrote: >> Hmmmmm .... interesting read. One of the reasons I am migrating to *BSD >> is the presumed absence of malevolent gov't involvement (*cough* SELinux >> *cough*), I thought the BSD's were mostly/entirely free from such, no ? > > Pretty sure that there aren't any NSA agents in deep cover who have > managed to become FreeBSD committers -- not that I have any way of > telling for sure of course. To the contrary to OpenBSD which allegedly had that sort of trouble: http://slashdot.org/story/10/12/15/004235/FBI-Alleged-To-Have-Backdoored-OpenBSDs-IPSEC-Stack Well, I didn't say had, I said allegedly had... Valeri > > Certainly FreeBSD relies on openness as the best guarantee that the OS > we're shipping is free from backdoors, trojans and the like. You've got > access to the source code and the build system so you can (in principle) > review everything you build and dyke out anything you don't like. Of > course, it's a tall order to expect everyone to have the skills to be > able to do that. Consequently, internally we're strongly advocating a > culture of routine code-review before making any commits, but > particularly to any sensitive areas of the kernel. > > Cheers, > > Matthew > > > > ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 18:13:17 2015 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 7E9E1687 for ; Thu, 11 Jun 2015 18:13:17 +0000 (UTC) (envelope-from csprajeeth@gmail.com) Received: from mail-yk0-x241.google.com (mail-yk0-x241.google.com [IPv6:2607:f8b0:4002:c07::241]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 40D071AA3 for ; Thu, 11 Jun 2015 18:13:17 +0000 (UTC) (envelope-from csprajeeth@gmail.com) Received: by ykp9 with SMTP id 9so1773799ykp.3 for ; Thu, 11 Jun 2015 11:13:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=lLc5AOCIlGncemA/vjyRgfnQGg+panKNhqsxuvtWbrQ=; b=zdJ+3tSzb4psw9OR8lz96iziLEHk/IOh+P9Y/if4/Caj1xu51nFoxsHktizpZoSC/o NkBEgW/52DME/+narTgSlN2OtHlKU335Gy/s1ol3WY/zVxTbDXwyLh61F7kFJPJcRt5J YW2JEx5LERI733CqLnbyKHudzDuR4jYPYunLxUFD6xxjewDIBh/NhvS6ZJIvb1rMDS8r g0f+2zC4jHpVwSCUmMnVYIMuvi9cpmAoBqfdiA2utwbmDXCaX0bKUWAH/7qOaZnJpoxm Af2md1bSfymEUGWkPB8SY4nWqli+QUCJ9eab0SRbNdiS7bVpV8qdPoDI6djJwqp81COX wQSA== MIME-Version: 1.0 X-Received: by 10.129.146.1 with SMTP id j1mr13621509ywg.59.1434046396406; Thu, 11 Jun 2015 11:13:16 -0700 (PDT) Received: by 10.37.194.134 with HTTP; Thu, 11 Jun 2015 11:13:16 -0700 (PDT) Date: Thu, 11 Jun 2015 23:43:16 +0530 Message-ID: Subject: pmcstat profiles kernel From: Sai Prajeeth To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 18:13:17 -0000 Hi, I am not sure if this is the list that addresses this question but here it goes. I would like to count hardware events such as instructions retired / unhalted-core-cycles for all the systems for BOTH OS and APPLICATION. I am aware that pmcstat has a system wide monitoring mode that counts events across all the CPUs for all processes. I want to know whether the statistics for kernel code are collected as well ? (which I dont think so). Thanks! From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 20:01:13 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 54AFB682 for ; Thu, 11 Jun 2015 20:01:13 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from smtp.infracaninophile.co.uk (smtp.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.infracaninophile.co.uk", Issuer "infracaninophile.co.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id C5A8E1836 for ; Thu, 11 Jun 2015 20:01:12 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from liminal.local ([137.122.64.33]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.15.1/8.15.1) with ESMTPSA id t5BK164f016078 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Thu, 11 Jun 2015 21:01:07 +0100 (BST) (envelope-from matthew@FreeBSD.org) Authentication-Results: smtp.infracaninophile.co.uk; dmarc=none header.from=FreeBSD.org DKIM-Filter: OpenDKIM Filter v2.9.2 smtp.infracaninophile.co.uk t5BK164f016078 Authentication-Results: smtp.infracaninophile.co.uk/t5BK164f016078; dkim=none reason="no signature"; dkim-adsp=none; dkim-atps=neutral X-Authentication-Warning: lucid-nonsense.infracaninophile.co.uk: Host [137.122.64.33] claimed to be liminal.local Message-ID: <5579E8FB.1000602@FreeBSD.org> Date: Thu, 11 Jun 2015 16:00:59 -0400 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: pmcstat profiles kernel References: In-Reply-To: Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="SmONu1B0DF5lr7s6kakDF8Tc2GgOVcIKB" X-Virus-Scanned: clamav-milter 0.98.7 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.8 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham autolearn_force=no version=3.4.1 X-Spam-Checker-Version: SpamAssassin 3.4.1 (2015-04-28) on lucid-nonsense.infracaninophile.co.uk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 20:01:13 -0000 This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --SmONu1B0DF5lr7s6kakDF8Tc2GgOVcIKB Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable On 11/06/2015 14:13, Sai Prajeeth wrote: > I am not sure if this is the list that addresses this question but here= it > goes. I would like to count hardware events such as instructions retire= d / > unhalted-core-cycles for all the systems for BOTH OS and APPLICATION. I= am > aware that pmcstat has a system wide monitoring mode that counts events= > across all the CPUs for all processes. I want to know whether the > statistics for kernel code are collected as well ? (which I dont think = so). This sounds more like a question for freebsd-performance@... or, failing that, freebsd-hackers@... which is the list for technical questions that don't fit into any of the lists for more specific topics. Cheers, Matthew --SmONu1B0DF5lr7s6kakDF8Tc2GgOVcIKB Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.20 (Darwin) iQJ8BAEBCgBmBQJVeekCXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ2NTNBNjhCOTEzQTRFNkNGM0UxRTEzMjZC QjIzQUY1MThFMUE0MDEzAAoJELsjr1GOGkATB8gP/38YlQN3x3B0gv0sdq5YAN2T 6yI/faqxoCGKfd5U75gqm9gAqXeVhGZqrdX/TPMGL+S3aEWW2fhQHprFWGD2/cU9 qrRwPyaqP1exj/l4OaGsY4eIxCo6eOYimCvLgZ5UkpovpH1hn+OS2GtrxEvqsDj4 suw76XoVYe8aL0w41Sz6RKTFgfvpFHNnGQnRDnY7/XmE0E4eJfrYrwxWh/usBECw /Kg+9McBtYK0bufXC6wFX7NF7d+IW1NqURMKwSiyAhdGJT9d+TmoB6CUd2UuYX2Q XOydLTLPwPqRIr0+AWfGXcfJmSvbNPO+DxSrB+FvHq+pXfNBcM174yK56V7eqZKa JTHPvAXmuzHni+feVBZ7J2uSaiZStHWwJQtgCyEJOPjRpae58vLOU8mKO0LLXHQI U6FxcC9q+zOi3CaNmE62uv7yYMZCKVpiS0EnmrG4w31uVrXTV29joXC4DsWLaUYg BZDACmEV763yzELNUSBn51WQq7GxB7VlTNe0uqP58do9L7kLIzvfS7ZXI0ZSk2VV 8I6d8QyVxisRk+2cbkmJNs90+/P66YOPV3+QUYzJxF0WN4xuNudS84OYJ/TJLzyY bzyq/XlvAoPBFXx74BMJW5cNy2qlntaSe4jGx8cD2BH7cdxTKO0PadnwgzbLUKkx 417CwZE3smYQT1eQnBW5 =a5Ct -----END PGP SIGNATURE----- --SmONu1B0DF5lr7s6kakDF8Tc2GgOVcIKB-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 20:12:16 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B37FA978 for ; Thu, 11 Jun 2015 20:12:16 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.208.146]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 5EEBF1B79 for ; Thu, 11 Jun 2015 20:12:16 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.208.106]) by hub.org (Postfix) with ESMTP id 7CA4D1FF4131 for ; Thu, 11 Jun 2015 17:04:21 -0300 (ADT) Authentication-Results: hub.org; dkim=pass reason="1024-bit key" header.d=hub.org header.i=@hub.org header.b=wZCcGk8j; dkim-adsp=pass Received: from hub.org ([200.46.208.146]) by localhost (maia.hub.org [200.46.208.106]) (maiad, port 10024) with ESMTP id 99045-06 for ; Thu, 11 Jun 2015 17:04:18 -0300 (ADT) Received: from [192.168.1.2] (S01067cb21b2ff4ca.gv.shawcable.net [24.108.26.71]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.org (Postfix) with ESMTPSA id E89471FF4130 for ; Thu, 11 Jun 2015 17:04:17 -0300 (ADT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hub.org; s=huborg; t=1434053058; bh=qKu/AlZRd7yo5z1/MZ1Xa8U8khNwbX4ZAaP+Zel9FJ4=; h=From:Subject:Date:To; b=wZCcGk8jcxN/PWIEudLIUMYOi34NG2nwx/r05vwHQx2x0aS4Sx2DBtQrQbpBJgThI CAihjHk/TRNVfT2eqzoRafgVSbnsoSKwZQGKa611eYodY2FelJY7RVCbuVELWb2eiL +TDMMzBzHyG8xUBbeVlcl6oZQX+SGvOCtJE+wwYs= From: Marc Fournier Subject: Softlayer VPS: Loading FreeBSD Message-Id: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> Date: Thu, 11 Jun 2015 13:04:15 -0700 To: freebsd-questions@freebsd.org Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2101\)) X-Mailer: Apple Mail (2.2101) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 20:12:16 -0000 I need to load FreeBSD 10.x onto VPSs over at Softlayer, and, since its = =E2=80=9Cnot supported=E2=80=9D by them, its like banging head against a = wall =E2=80=A6 The easiest, I think, would be to create a image in VirtualBox, and then = I need to someone translate from VirtualBox -> ISO so that I can upload = it to them to have it loaded =E2=80=A6 what is eluding me is how to = convert from VirtualBox -> ISO =E2=80=A6 there is no =E2=80=9Cexport = ISO=E2=80=9D option =E2=80=A6 has anyone had any experience with Softlayer and loading a FreeBSD VPS = there? And, if not, can someone suggest a good tool that will allow me = to create an ISO from a VirtualBox build? Or, if this makes any sense, = of building an ISO from a running FreeBSD system, irrelevant of = VirtualBox? Thx =E2=80=A6 Marc G Fournier Owner, Hub.Org Hosting Solutions S.A. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 20:25:38 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 1D608B77 for ; Thu, 11 Jun 2015 20:25:38 +0000 (UTC) (envelope-from jungleboogie0@gmail.com) Received: from mail-ie0-x232.google.com (mail-ie0-x232.google.com [IPv6:2607:f8b0:4001:c03::232]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id DC0031E35 for ; Thu, 11 Jun 2015 20:25:37 +0000 (UTC) (envelope-from jungleboogie0@gmail.com) Received: by iebmu5 with SMTP id mu5so12060887ieb.1 for ; Thu, 11 Jun 2015 13:25:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=Nr2xambk7TZyegn5n7fccGWCAi+Karlhmi+bCTrlxEs=; b=MrVUAT74cosv7+D2fdWjKkzc6hXCrwAEExKRmVMAIEQujhh//gcGlG1xKA9pYjL+oP AaDPCKQorw+9quezBiJRMEdgIixu4PYmZVrDf+JtsqJP4AnOXl8ujLSbMBk8gOrmGz3L 883ftkF0cRmclwCJi9PJVIdPWgE0oqSpH+fCialu4nze/EPvJZHdB8r90eZSZCu70hes Pe+UvytqgTDhBXhJKi4OASv9xHQ6j0esqoIcYYR6UAdP5C/8z5nJDoWLvaF78Dk9LplM FbROqD4kmf5ZWOVEqhkTgs0J/46E0BccHcfNh4K0D/UQuzNIwIF/cCM49ij9oDBCy3KN ScIA== MIME-Version: 1.0 X-Received: by 10.50.79.167 with SMTP id k7mr124122igx.32.1434054337238; Thu, 11 Jun 2015 13:25:37 -0700 (PDT) Received: by 10.79.111.18 with HTTP; Thu, 11 Jun 2015 13:25:37 -0700 (PDT) In-Reply-To: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> Date: Thu, 11 Jun 2015 13:25:37 -0700 Message-ID: Subject: Re: Softlayer VPS: Loading FreeBSD From: jungle Boogie To: Marc Fournier Cc: FreeBSD Questions Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 20:25:38 -0000 Hi Marc, On 11 June 2015 at 13:04, Marc Fournier wrote: > I need to load FreeBSD 10.x onto VPSs over at Softlayer, and, since its = =E2=80=9Cnot supported=E2=80=9D by them, its like banging head against a wa= ll =E2=80=A6 If they give you over the internet console access via ipmi or something, you can upload the iso directly. Do you know if they give you that access? VPS provider https://www.vultr.com/ gives you that access and they have freeBSD images. Good luck with the head banging! --=20 ------- inum: 883510009027723 sip: jungleboogie@sip2sip.info xmpp: jungle-boogie@jit.si From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 22:07:18 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id EE94E1BE for ; Thu, 11 Jun 2015 22:07:17 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.208.146]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 995011904 for ; Thu, 11 Jun 2015 22:07:17 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.208.106]) by hub.org (Postfix) with ESMTP id 1A40E1FF4131; Thu, 11 Jun 2015 19:07:15 -0300 (ADT) Authentication-Results: hub.org; dkim=pass reason="1024-bit key" header.d=hub.org header.i=@hub.org header.b=fSlIZJ4Y; dkim-adsp=pass Received: from hub.org ([200.46.208.146]) by localhost (maia.hub.org [200.46.208.106]) (maiad, port 10024) with ESMTP id 03978-07; Thu, 11 Jun 2015 19:07:14 -0300 (ADT) Received: from [192.168.1.2] (S01067cb21b2ff4ca.gv.shawcable.net [24.108.26.71]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.org (Postfix) with ESMTPSA id D85AC1FF4130; Thu, 11 Jun 2015 19:07:13 -0300 (ADT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hub.org; s=huborg; t=1434060434; bh=J2DwT7El8HYc933EKgkogO1x0Rrgu3PbhDCwcQF31l0=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=fSlIZJ4Yty/ROfoBnZrSIuFgCcxBbRt92IyTwYB1Be/ZJQVqAPGknc1yjjcZzMVUS 7+ewtj1EhduFC8/FXwxrwgTdOhjOJj8HsKE1MHnYiGViC6wLg3cyQi1XNT6NOPmMG9 PenzejNU5nNlaxQukN29jgEZSA3PT163jrVkOOBI= Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2101\)) Subject: Re: Softlayer VPS: Loading FreeBSD From: Marc Fournier In-Reply-To: Date: Thu, 11 Jun 2015 15:07:11 -0700 Cc: FreeBSD Questions Message-Id: <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> To: jungle Boogie X-Mailer: Apple Mail (2.2101) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 22:07:18 -0000 Marc G Fournier Owner, Hub.Org Hosting Solutions S.A. > On Jun 11, 2015, at 13:25, jungle Boogie = wrote: >=20 > Hi Marc, > On 11 June 2015 at 13:04, Marc Fournier wrote: >> I need to load FreeBSD 10.x onto VPSs over at Softlayer, and, since = its =E2=80=9Cnot supported=E2=80=9D by them, its like banging head = against a wall =E2=80=A6 >=20 > If they give you over the internet console access via ipmi or > something, you can upload the iso directly. Do you know if they give > you that access? That gave us IPMI access for the Bare Metal server we put in place, but = no KVM access for VPS =E2=80=A6 for VPS, I need to create an ISO of my = install, upload that and then they effectively =E2=80=98dd=E2=80=99 it = to the VPS, which is cool, but I need to figure out how to create an = image based on a VirtualBox build on a Mac OS X system :) From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 22:27:56 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 272A83D4 for ; Thu, 11 Jun 2015 22:27:56 +0000 (UTC) (envelope-from ch@sysconfig.org.uk) Received: from mx.arcane.email (mx.arcane.email [54.75.251.249]) by mx1.freebsd.org (Postfix) with ESMTP id DD2221D81 for ; Thu, 11 Jun 2015 22:27:55 +0000 (UTC) (envelope-from ch@sysconfig.org.uk) Received: from [127.0.0.1] (localhost [127.0.0.1]) by mx.arcane.email (Postfix) with ESMTPSA id 6687E1D7 for ; Thu, 11 Jun 2015 23:27:49 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=sysconfig.org.uk; s=selector1; t=1434061669; bh=rOvCc2+rOSJVZ2h9Juk8XxA/t/wsa+xkq3Jru9eiCYA=; h=Date:From:To:Subject:References:In-Reply-To; b=pOuFbNGXp21F8IloNxRWL8FezSn8so8Bx2JEWr6cnXCldjuMH4OulexNP8wwSr/NT QnKhKZJtBmzbhJa5qQqoBoTqYW/VLbxzeer1YnfBtDbDy0FIe5wWnZOkF+bkYHpAiM 2P8AAvkB1+PrY9UEsQhDvQRsOrc6NxhDW+24stKI= X-Gateway: Arcane.Email 1.0 Message-ID: <557A0B64.9050808@sysconfig.org.uk> Date: Thu, 11 Jun 2015 23:27:48 +0100 From: Carsten Heesch User-Agent: Arcane.Email 1.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Softlayer VPS: Loading FreeBSD References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> In-Reply-To: <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 22:27:56 -0000 > That gave us IPMI access for the Bare Metal server we put in place, > but no KVM access for VPS … for VPS, I need to create an ISO of my > install, upload that and then they effectively ‘dd’ it to the VPS, > which is cool, but I need to figure out how to create an image based > on a VirtualBox build on a Mac OS X system :) If they really just "dd" it, then a RAW image of your Virtualbox instance should work, shouldn't it? Choose QCOW as the disk format in VirtualBox, and then use "qemu-img convert" to make a raw image. qemu-img apparently understands other formats like VDI and VDMK too, but I have only ever used QCOW-to-RAW myself for similar situations with other providers. I haven't got any OSX devices available at the moment, but apparently Qemu is available in Macports and should contain qemu-img. Cheers Carsten From owner-freebsd-questions@FreeBSD.ORG Thu Jun 11 23:00:37 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 7A4CBAB5 for ; Thu, 11 Jun 2015 23:00:37 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.208.146]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 41E3A1600 for ; Thu, 11 Jun 2015 23:00:37 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.208.106]) by hub.org (Postfix) with ESMTP id 909B71FF4131; Thu, 11 Jun 2015 20:00:35 -0300 (ADT) Authentication-Results: hub.org; dkim=pass reason="1024-bit key" header.d=hub.org header.i=@hub.org header.b=kYmbAGgU; dkim-adsp=pass Received: from hub.org ([200.46.208.146]) by localhost (maia.hub.org [200.46.208.106]) (maiad, port 10024) with ESMTP id 28597-04; Thu, 11 Jun 2015 20:00:35 -0300 (ADT) Received: from [192.168.1.2] (S01067cb21b2ff4ca.gv.shawcable.net [24.108.26.71]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.org (Postfix) with ESMTPSA id 809251FF4130; Thu, 11 Jun 2015 20:00:34 -0300 (ADT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hub.org; s=huborg; t=1434063634; bh=eAcST6gsUmSINjE91eb01YT/fARHTAYRQlHFtMDuIMI=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=kYmbAGgU+FWzYNVETc5qUa01iXwECM9qg8FRz4SxgfDZO+k4EdKq9Z6wdJVlUDIOb mhBXR/J98nOxf0VWjfudH/LksewDf3FLcN3iE4WTMuSrLvjTjqo+J8Fk0ipNpg39sp 12vYnz4YCRKranWN/9FpYJfdsmKLDdwwgWg3dcXA= Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2101\)) Subject: Re: Softlayer VPS: Loading FreeBSD From: Marc Fournier In-Reply-To: <557A0B64.9050808@sysconfig.org.uk> Date: Thu, 11 Jun 2015 16:00:32 -0700 Cc: freebsd-questions@freebsd.org Message-Id: References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> To: Carsten Heesch X-Mailer: Apple Mail (2.2101) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jun 2015 23:00:37 -0000 Marc G Fournier Owner, Hub.Org Hosting Solutions S.A. > On Jun 11, 2015, at 15:27, Carsten Heesch wrote: >=20 >=20 >> That gave us IPMI access for the Bare Metal server we put in place, >> but no KVM access for VPS =E2=80=A6 for VPS, I need to create an ISO = of my >> install, upload that and then they effectively =E2=80=98dd=E2=80=99 = it to the VPS, >> which is cool, but I need to figure out how to create an image based >> on a VirtualBox build on a Mac OS X system :) >=20 > If they really just "dd" it, then a RAW image of your Virtualbox > instance should work, shouldn't it? I knew when I typed this that I shouldn=E2=80=99t have .. :) I don=E2=80= =99t know what they do exactly, getting info out of htem is like pulling = teeth =E2=80=A6 so far, I=E2=80=99m not even sure what I should be = setting for ethernet configuration, although I=E2=80=99m suspecting = =E2=80=9CDHCP=E2=80=9D, else I=E2=80=99d have to load a new ISO for each = VPS I=E2=80=99m setting up =E2=80=A6 > Choose QCOW as the disk format in VirtualBox, and then use "qemu-img > convert" to make a raw image. I have several FreeBSD boxes, so if there is a method of converting from = =E2=80=9CXYZ -> ISO=E2=80=9D using FreeBSD, that is cool too =E2=80=A6 I = can make / configure the image on my desktop, upload to my server and do = the conversion there =E2=80=A6 I can use qemu-img to pretty much convert to any format (except ISO) =E2=80= =A6 but how do I get to that final step? Thinking this through =E2=80=A6 ppl make livecd=E2=80=99s, so this is = obviously possible =E2=80=A6 does it make sense that that is all I need = to do? Although I=E2=80=99ve never done it, mind you, but if I were to = upload a regular liveCD, and they installed / booted that, that should = be it =E2=80=A6 or am I overlookign something? From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 00:13:22 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id BCDD68A6 for ; Fri, 12 Jun 2015 00:13:22 +0000 (UTC) (envelope-from lacey.leanne@gmail.com) Received: from mail-pd0-x22f.google.com (mail-pd0-x22f.google.com [IPv6:2607:f8b0:400e:c02::22f]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 886F818EC for ; Fri, 12 Jun 2015 00:13:22 +0000 (UTC) (envelope-from lacey.leanne@gmail.com) Received: by pdbnf5 with SMTP id nf5so12394913pdb.2 for ; Thu, 11 Jun 2015 17:13:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type; bh=q5ra89aSWcvVRxllYam0sY/ynJWmbTNcwysczjyHkPs=; b=nkO8OZyNQ9VATJHYKYgwsxJTaHaOmdTo6c7VLoWeCwIFYV69mKgYgPfCm6qqFwFJFD LVtF5iCk60bS7yl+CcUSSin+YArDJqdmSoe0eCM3bp22OOmn7zp/JQ4bx1qixNjIeOlx QlQ9+Qos2Ki1cJrFXMWRYuPu3fF92qtq1Vrh3gbuZqkKFapVDfJ8+55jphvO8fcJRXfV 4kxGinQNW4q1jIr97HFFaZ8M3+iHulasSEb+HBkndJtZ9GDM07XPxxcCBvzCmi8mL3kr XFm97tU9THJqggd5OfibwjDWbkEWFan3N3q3jDVabM/UkbmJuWGpj723zOgo2hXsqqzt jMZw== X-Received: by 10.68.57.170 with SMTP id j10mr18702216pbq.150.1434068001957; Thu, 11 Jun 2015 17:13:21 -0700 (PDT) Received: from [192.168.1.2] (c-50-137-62-165.hsd1.or.comcast.net. [50.137.62.165]) by mx.google.com with ESMTPSA id sc1sm1741560pac.36.2015.06.11.17.13.19 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 11 Jun 2015 17:13:20 -0700 (PDT) Message-ID: <557A241D.5090307@gmail.com> Date: Thu, 11 Jun 2015 17:13:17 -0700 From: Lacey Powers User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Softlayer VPS: Loading FreeBSD References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 00:13:22 -0000 On 06/11/2015 16:00, Marc Fournier wrote: > Marc G Fournier > Owner, Hub.Org Hosting Solutions S.A. > >> On Jun 11, 2015, at 15:27, Carsten Heesch wrote: >> >> >>> That gave us IPMI access for the Bare Metal server we put in place, >>> but no KVM access for VPS … for VPS, I need to create an ISO of my >>> install, upload that and then they effectively ‘dd’ it to the VPS, >>> which is cool, but I need to figure out how to create an image based >>> on a VirtualBox build on a Mac OS X system :) >> If they really just "dd" it, then a RAW image of your Virtualbox >> instance should work, shouldn't it? > I knew when I typed this that I shouldn’t have .. :) I don’t know what they do exactly, getting info out of htem is like pulling teeth … so far, I’m not even sure what I should be setting for ethernet configuration, although I’m suspecting “DHCP”, else I’d have to load a new ISO for each VPS I’m setting up … > >> Choose QCOW as the disk format in VirtualBox, and then use "qemu-img >> convert" to make a raw image. > I have several FreeBSD boxes, so if there is a method of converting from “XYZ -> ISO” using FreeBSD, that is cool too … I can make / configure the image on my desktop, upload to my server and do the conversion there … > > I can use qemu-img to pretty much convert to any format (except ISO) … but how do I get to that final step? > > Thinking this through … ppl make livecd’s, so this is obviously possible … does it make sense that that is all I need to do? Although I’ve never done it, mind you, but if I were to upload a regular liveCD, and they installed / booted that, that should be it … or am I overlookign something? > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" Hello Marc, Sounds like the last thing you need is to mount the image, and use mkisofs to make your own iso There are examples here, https://www.freebsd.org/doc/handbook/creating-cds.html and there are also tools for making releases or custom releases in /usr/src/releaseoutlined in man 7 release Which might be easier to use and customize than coercing a VirtualBox image into something useful. But, the basic command for making an ISO is something like this: |# mkisofs -R -o /tmp/FreeBSD-Custom.iso /path/to/my/mounted/disk/image| You might need to change the options to suit your needs, though. It's been awhile since I last made custom CDs. Hope that helps.=) Regards, Lacey From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 00:28:52 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 45B1CB30 for ; Fri, 12 Jun 2015 00:28:52 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.208.146]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A9A521B3D for ; Fri, 12 Jun 2015 00:28:51 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.208.106]) by hub.org (Postfix) with ESMTP id 1C1FA1FF4131; Thu, 11 Jun 2015 21:28:49 -0300 (ADT) Authentication-Results: hub.org; dkim=pass reason="1024-bit key" header.d=hub.org header.i=@hub.org header.b=YD+gDWoi; dkim-adsp=pass Received: from hub.org ([200.46.208.146]) by localhost (maia.hub.org [200.46.208.106]) (maiad, port 10024) with ESMTP id 04384-04; Thu, 11 Jun 2015 21:28:48 -0300 (ADT) Received: from [192.168.1.2] (S01067cb21b2ff4ca.gv.shawcable.net [24.108.26.71]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.org (Postfix) with ESMTPSA id F06221FF4130; Thu, 11 Jun 2015 21:28:47 -0300 (ADT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hub.org; s=huborg; t=1434068928; bh=ht8X3PooAs6g2DzyzNnwP1cGfbWnlevcmDxjOWyLymk=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=YD+gDWoi2synxHH55sDKyYeZ9+pBk1GFPm6NvjSvkOORg1d+F/jTWa8+684BjJpr8 Y7iPEjp3Dbady1cK0AphxYUF+1v/Y9Z4JsdWOtFx+9MM1lrfC8CwmEJw48JozEO8NJ JSHJUWcJMgcPyEKtEB8zKM8n5WelLmWMZ8f8/XZU= Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2101\)) Subject: Re: Softlayer VPS: Loading FreeBSD From: Marc Fournier In-Reply-To: <557A241D.5090307@gmail.com> Date: Thu, 11 Jun 2015 17:28:46 -0700 Cc: freebsd-questions@freebsd.org Message-Id: <3D2FF45C-9C83-4504-8051-4A409E06F8BE@hub.org> References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> <557A241D.5090307@gmail.com> To: Lacey Powers X-Mailer: Apple Mail (2.2101) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 00:28:52 -0000 Marc G Fournier Owner, Hub.Org Hosting Solutions S.A. > On Jun 11, 2015, at 17:13, Lacey Powers = wrote: >=20 >=20 >=20 > On 06/11/2015 16:00, Marc Fournier wrote: >> Marc G Fournier >> Owner, Hub.Org Hosting Solutions S.A. >>=20 >>> On Jun 11, 2015, at 15:27, Carsten Heesch = wrote: >>>=20 >>>=20 >>>> That gave us IPMI access for the Bare Metal server we put in place, >>>> but no KVM access for VPS =E2=80=A6 for VPS, I need to create an = ISO of my >>>> install, upload that and then they effectively =E2=80=98dd=E2=80=99 = it to the VPS, >>>> which is cool, but I need to figure out how to create an image = based >>>> on a VirtualBox build on a Mac OS X system :) >>> If they really just "dd" it, then a RAW image of your Virtualbox >>> instance should work, shouldn't it? >> I knew when I typed this that I shouldn=E2=80=99t have .. :) I = don=E2=80=99t know what they do exactly, getting info out of htem is = like pulling teeth =E2=80=A6 so far, I=E2=80=99m not even sure what I = should be setting for ethernet configuration, although I=E2=80=99m = suspecting =E2=80=9CDHCP=E2=80=9D, else I=E2=80=99d have to load a new = ISO for each VPS I=E2=80=99m setting up =E2=80=A6 >>=20 >>> Choose QCOW as the disk format in VirtualBox, and then use "qemu-img >>> convert" to make a raw image. >> I have several FreeBSD boxes, so if there is a method of converting = from =E2=80=9CXYZ -> ISO=E2=80=9D using FreeBSD, that is cool too =E2=80=A6= I can make / configure the image on my desktop, upload to my server and = do the conversion there =E2=80=A6 >>=20 >> I can use qemu-img to pretty much convert to any format (except ISO) = =E2=80=A6 but how do I get to that final step? >>=20 >> Thinking this through =E2=80=A6 ppl make livecd=E2=80=99s, so this is = obviously possible =E2=80=A6 does it make sense that that is all I need = to do? Although I=E2=80=99ve never done it, mind you, but if I were to = upload a regular liveCD, and they installed / booted that, that should = be it =E2=80=A6 or am I overlookign something? >>=20 >>=20 >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" >=20 > Hello Marc, >=20 > Sounds like the last thing you need is to mount the image, and use = mkisofs to make your own iso >=20 > There are examples here, >=20 > https://www.freebsd.org/doc/handbook/creating-cds.html >=20 > and there are also tools for making releases or custom releases in = /usr/src/releaseoutlined in >=20 > man 7 release >=20 > Which might be easier to use and customize than coercing a VirtualBox = image into something useful. >=20 > But, the basic command for making an ISO is something like this: >=20 > |# mkisofs -R -o /tmp/FreeBSD-Custom.iso = /path/to/my/mounted/disk/image| >=20 > You might need to change the options to suit your needs, though. >=20 > It's been awhile since I last made custom CDs. >=20 > Hope that helps.=3D) Thanks .. .we=E2=80=99ll see how helpful, but I=E2=80=99m almost ready = to drop these guys and go to Backspace =E2=80=A6 there website = explicitly states =E2=80=9CFreeBSD=E2=80=9D = http://www.softlayer.com/software = =E2=80=A6 yet nobody there seems to be much help in getting it installed = =E2=80=A6=20= From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 00:50:42 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 1485414 for ; Fri, 12 Jun 2015 00:50:42 +0000 (UTC) (envelope-from dan@buildingonline.com) Received: from alisocreek.buildingonline.net (alisocreek.buildingonline.net [204.109.62.198]) by mx1.freebsd.org (Postfix) with ESMTP id D3B0D1052 for ; Fri, 12 Jun 2015 00:50:41 +0000 (UTC) (envelope-from dan@buildingonline.com) Received: by alisocreek.buildingonline.net (Postfix, from userid 58) id 76749BCCFE1; Thu, 11 Jun 2015 17:44:26 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on alisocreek.buildingonline.net X-Spam-Level: X-Spam-Status: No, score=-2.9 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham autolearn_force=no version=3.4.0 Received: from Whistler.local (busarow2 [69.51.79.5]) (Authenticated sender: dan@dpcsys.com) by alisocreek.buildingonline.net (Postfix) with ESMTPA id 482B5BC9F23 for ; Thu, 11 Jun 2015 17:44:16 -0700 (PDT) Message-ID: <557A2B5F.4010603@buildingonline.com> Date: Thu, 11 Jun 2015 18:44:15 -0600 From: Dan Busarow Organization: BuildingOnline.com User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Softlayer VPS: Loading FreeBSD References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> <557A241D.5090307@gmail.com> <3D2FF45C-9C83-4504-8051-4A409E06F8BE@hub.org> In-Reply-To: <3D2FF45C-9C83-4504-8051-4A409E06F8BE@hub.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 00:50:42 -0000 Marc, Checkout rootbsd.net I have 10 VPS and 1 dedicated server there. Excellent BSD support as you might gather from the name. Dan -- Dan Busarow BuildingOnline.com http://www.BuildingOnline.net/ 888-496-6648 ext 218 On 6/11/15 6:28 PM, Marc Fournier wrote: > > Marc G Fournier > Owner, Hub.Org Hosting Solutions S.A. > >> On Jun 11, 2015, at 17:13, Lacey Powers wrote: >> >> >> >> On 06/11/2015 16:00, Marc Fournier wrote: >>> Marc G Fournier >>> Owner, Hub.Org Hosting Solutions S.A. >>> >>>> On Jun 11, 2015, at 15:27, Carsten Heesch wrote: >>>> >>>> >>>>> That gave us IPMI access for the Bare Metal server we put in place, >>>>> but no KVM access for VPS … for VPS, I need to create an ISO of my >>>>> install, upload that and then they effectively ‘dd’ it to the VPS, >>>>> which is cool, but I need to figure out how to create an image based >>>>> on a VirtualBox build on a Mac OS X system :) >>>> If they really just "dd" it, then a RAW image of your Virtualbox >>>> instance should work, shouldn't it? >>> I knew when I typed this that I shouldn’t have .. :) I don’t know what they do exactly, getting info out of htem is like pulling teeth … so far, I’m not even sure what I should be setting for ethernet configuration, although I’m suspecting “DHCP”, else I’d have to load a new ISO for each VPS I’m setting up … >>> >>>> Choose QCOW as the disk format in VirtualBox, and then use "qemu-img >>>> convert" to make a raw image. >>> I have several FreeBSD boxes, so if there is a method of converting from “XYZ -> ISO” using FreeBSD, that is cool too … I can make / configure the image on my desktop, upload to my server and do the conversion there … >>> >>> I can use qemu-img to pretty much convert to any format (except ISO) … but how do I get to that final step? >>> >>> Thinking this through … ppl make livecd’s, so this is obviously possible … does it make sense that that is all I need to do? Although I’ve never done it, mind you, but if I were to upload a regular liveCD, and they installed / booted that, that should be it … or am I overlookign something? >>> >>> >>> _______________________________________________ >>> freebsd-questions@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >> >> Hello Marc, >> >> Sounds like the last thing you need is to mount the image, and use mkisofs to make your own iso >> >> There are examples here, >> >> https://www.freebsd.org/doc/handbook/creating-cds.html >> >> and there are also tools for making releases or custom releases in /usr/src/releaseoutlined in >> >> man 7 release >> >> Which might be easier to use and customize than coercing a VirtualBox image into something useful. >> >> But, the basic command for making an ISO is something like this: >> >> |# mkisofs -R -o /tmp/FreeBSD-Custom.iso /path/to/my/mounted/disk/image| >> >> You might need to change the options to suit your needs, though. >> >> It's been awhile since I last made custom CDs. >> >> Hope that helps.=) > > Thanks .. .we’ll see how helpful, but I’m almost ready to drop these guys and go to Backspace … there website explicitly states “FreeBSD” http://www.softlayer.com/software … yet nobody there seems to be much help in getting it installed … > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 03:56:19 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 53EC2632 for ; Fri, 12 Jun 2015 03:56:19 +0000 (UTC) (envelope-from hybrid120@gmail.com) Received: from mail-oi0-x22d.google.com (mail-oi0-x22d.google.com [IPv6:2607:f8b0:4003:c06::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 1751D1F5A for ; Fri, 12 Jun 2015 03:56:19 +0000 (UTC) (envelope-from hybrid120@gmail.com) Received: by oihd6 with SMTP id d6so14731395oih.2 for ; Thu, 11 Jun 2015 20:56:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=references:mime-version:in-reply-to:content-type :content-transfer-encoding:message-id:cc:from:subject:date:to; bh=JypnNiBrAUr91zmyL8QLVsBliQ9UeTS60Rs7pxJ8Mcs=; b=Zz5Imw5dgRPkeFBLp4Z1s87uGkQn/8AsDipbTOZNVIJJKurnIZwPijJjDusN2BiHzS +n/yryXu0rgbxvV6+5ykz1kxYhBa3yaZos9uZ3huElGzEm1XsZ6zElgowK7/3fD9BYQM DzLg6zU08/WovUBwL7oJ33XunY6Pc1fVR/AncPpWWjlT/+rThFo3tNQrJ2AD4vc0ipy0 xqysaAAksi6U4NOOrti8wcbDwa6a6Yur+jkwzwzDJStIMF5F6Z7BXGyQLX3tzpvjq1ty zzTvw+qgaAZ639/+UwL3kamM8zZsNbDOWvVwJ62JcR+Ytrje85hOPA5++pN8qEaMTDvs V67g== X-Received: by 10.60.123.51 with SMTP id lx19mr10502630oeb.46.1434081378299; Thu, 11 Jun 2015 20:56:18 -0700 (PDT) Received: from [192.168.1.64] (pool-173-57-126-70.dllstx.fios.verizon.net. [173.57.126.70]) by mx.google.com with ESMTPSA id sm8sm1887691obb.13.2015.06.11.20.56.16 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 11 Jun 2015 20:56:17 -0700 (PDT) References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> Mime-Version: 1.0 (1.0) In-Reply-To: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Message-Id: <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> Cc: "freebsd-questions@freebsd.org" X-Mailer: iPad Mail (12F69) From: Matthew Pherigo Subject: Re: randall hyde's high level assembly! Date: Thu, 11 Jun 2015 22:56:15 -0500 To: "mayuresh@kathe.in" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 03:56:19 -0000 Hey Mayuresh, There's actually a port in the tree already! 'pkg install hla' --Matt > On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe wrote: >=20 > has anyone been successful at working with randall hyde's high level assem= bly toolkit under freebsd 10.x? > http://www.plantation-productions.com/Webster/ claims to have a pre-built a= rchive, but one that fails to assemble the binaries. :( >=20 > ~mayuresh >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.or= g" From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 04:29:37 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C6C799FF for ; Fri, 12 Jun 2015 04:29:37 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [IPv6:2001:4b98:c:538::198]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8687717F6 for ; Fri, 12 Jun 2015 04:29:36 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter31-d.gandi.net (mfilter31-d.gandi.net [217.70.178.162]) by relay6-d.mail.gandi.net (Postfix) with ESMTP id 1ABC3FB86E; Fri, 12 Jun 2015 06:29:34 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter31-d.gandi.net Received: from relay6-d.mail.gandi.net ([217.70.183.198]) by mfilter31-d.gandi.net (mfilter31-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id V7PzTlFdGGRI; Fri, 12 Jun 2015 06:29:32 +0200 (CEST) X-Originating-IP: 10.58.1.149 Received: from webmail.gandi.net (webmail9-d.mgt.gandi.net [10.58.1.149]) (Authenticated sender: mayuresh@kathe.in) by relay6-d.mail.gandi.net (Postfix) with ESMTPA id B01C5FB86F; Fri, 12 Jun 2015 06:29:32 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Fri, 12 Jun 2015 09:59:32 +0530 From: Mayuresh Kathe To: Matthew Pherigo Cc: freebsd-questions@freebsd.org Subject: Re: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> Message-ID: <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 04:29:37 -0000 hi matthew, no luck, I got the following message; root@www:~ # pkg install hla Updating FreeBSD repository catalogue... FreeBSD repository is up-to-date. All repositories are up-to-date. pkg: No packages available to install matching 'hla' have been found in the repositories `uname -a` gives me the following; FreeBSD www.kathe.in 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 #0: Wed May 13 06:54:13 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 `freebsd-version` gives me the following; 10.1-RELEASE-p11 anything i might be doing wrong? ~mayuresh On 2015-06-12 09:26, Matthew Pherigo wrote: > Hey Mayuresh, > > There's actually a port in the tree already! 'pkg install hla' > > --Matt > >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe wrote: >> >> has anyone been successful at working with randall hyde's high level >> assembly toolkit under freebsd 10.x? >> http://www.plantation-productions.com/Webster/ claims to have a >> pre-built archive, but one that fails to assemble the binaries. :( >> >> ~mayuresh >> >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 05:29:29 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D7B3DDBE for ; Fri, 12 Jun 2015 05:29:29 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.208.146]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A42FF169E for ; Fri, 12 Jun 2015 05:29:29 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.208.106]) by hub.org (Postfix) with ESMTP id F0E2D98C3C1 for ; Fri, 12 Jun 2015 02:29:26 -0300 (ADT) Authentication-Results: hub.org; dkim=pass reason="1024-bit key" header.d=hub.org header.i=@hub.org header.b=IjgGyNhV; dkim-adsp=pass Received: from hub.org ([200.46.208.146]) by localhost (maia.hub.org [200.46.208.106]) (maiad, port 10024) with ESMTP id 57170-09 for ; Fri, 12 Jun 2015 02:29:26 -0300 (ADT) Received: from [192.168.1.2] (S01067cb21b2ff4ca.gv.shawcable.net [24.108.26.71]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.org (Postfix) with ESMTPSA id D595898C3C0 for ; Fri, 12 Jun 2015 02:29:25 -0300 (ADT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=hub.org; s=huborg; t=1434086966; bh=scBaun/zZsDdhZ/dxOW9bmZd5kPAd5bGquB2Cp5624g=; h=From:Subject:Date:To; b=IjgGyNhVPUHFSuyZsfF3M+XPHJfp27FfTh9hdXZSrked98Rg/Fx7fhAm10v68GcxJ hVsIDfeiwr4XvJH+EyMH3Hmw5AWL7UBcOnFMCunyM1oN8/zYjMlRGmjGbLGVAFuQVZ Lok1vEseqVRWiadwKz+/45pSqWJ3/jxBgs8vwUEA= From: Marc Fournier Subject: Any iSCSI experts out there ... ? Message-Id: <2CC9ADB0-8F26-4405-9CB5-A04F79E35BF5@hub.org> Date: Thu, 11 Jun 2015 22:29:22 -0700 To: FreeBSD Questions Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2101\)) X-Mailer: Apple Mail (2.2101) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 05:29:29 -0000 Softlayer (hosting) provides a block device, but the instructions they = have are for Windows or Linux =E2=80=A6 the linux ones = (http://knowledgelayer.softlayer.com/procedure/accessing-block-storage-lin= ux = ) don=E2=80=99t quite match FreeBSD (do they ever?) =E2=80=A6 = specifically, it takes about a multipath daemon and such =E2=80=A6 I = found =E2=80=98gmultipath=E2=80=99, but not daemon =E2=80=A6 I did the iscsid end of things, and started up iscsid =E2=80=A6 and all = iscsictl gives me is: Target name Target portal State iqn.2005-05.com.softlayer:SL01SU570747-1 10.2.174.102 Disconnected or Target name Target portal State iqn.2005-05.com.softlayer:SL01SU570747-1 10.2.174.102 Operation = timed out so its trying to connect, just isn=E2=80=99t =E2=80=A6 which either = means the multi path stuff is critical -or- I=E2=80=99m missing = something =E2=80=A6 Never tried this before, the handbook makes it look straightforward =E2=80= =A6 Can someone take a quick peak at the Linux docs I link to above and let = me know what I may be missing =E2=80=A6 I=E2=80=99m going to try and = push them to writing a FreeBSD doc, so that other clients wishing to use = FreeBSD won=E2=80=99t be left in the dark from their knowledgebase =E2=80=A6= thx=20 Marc G Fournier Owner, Hub.Org Hosting Solutions S.A. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 05:34:08 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 84034E8A for ; Fri, 12 Jun 2015 05:34:08 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-ig0-x22e.google.com (mail-ig0-x22e.google.com [IPv6:2607:f8b0:4001:c05::22e]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4D1ED18C9 for ; Fri, 12 Jun 2015 05:34:08 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: by igbsb11 with SMTP id sb11so4656969igb.0 for ; Thu, 11 Jun 2015 22:34:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=oGzCUrb/K28alApdQbc4RO/zEO9RVOtN+jlqpGGh2Ec=; b=e+6YP/WttIid6lur30QZgvNsAfvf9/dKPnzktAhe+isUwai8F14K0FSkDNCmsuboAE kMR8tIzVCfsjhHXXLS/GYz2ZMxO6dtCTl4xHpr0S4cgm/dm8NZJj5eLp39AvhO6Q2+49 GkWDE5suxveoSrWEVWszG/md7qa+Ium5l9eavDRM1yGP4h1dPKgHqcO01GNWnkmOVHFT KboWSJwPsOvcktSswJvF4u5eW1Xuh854uUqmR7npd1xFPCp8BDs49gq2nNBajK6oXLZI 7yrsGzDgI8U7UrMOyZ+EFTdC0t9o2LiZ8tu7++ymO9PBzpw40gnoytDo+m6YS80oWe3H oB7w== MIME-Version: 1.0 X-Received: by 10.107.7.37 with SMTP id 37mr15624494ioh.28.1434087247777; Thu, 11 Jun 2015 22:34:07 -0700 (PDT) Received: by 10.65.15.33 with HTTP; Thu, 11 Jun 2015 22:34:07 -0700 (PDT) In-Reply-To: <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> Date: Thu, 11 Jun 2015 22:34:07 -0700 Message-ID: Subject: Re: randall hyde's high level assembly! From: Mehmet Erol Sanliturk To: mayuresh@kathe.in Cc: Matthew Pherigo , FreeBSD Questions Mailing List Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 05:34:08 -0000 On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe wrote: > hi matthew, > > no luck, I got the following message; > root@www:~ # pkg install hla > Updating FreeBSD repository catalogue... > FreeBSD repository is up-to-date. > All repositories are up-to-date. > pkg: No packages available to install matching 'hla' have been found in > the repositories > > `uname -a` gives me the following; > FreeBSD www.kathe.in 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 #0: Wed > May 13 06:54:13 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC > amd64 > > `freebsd-version` gives me the following; > 10.1-RELEASE-p11 > > anything i might be doing wrong? > > ~mayuresh > > > On 2015-06-12 09:26, Matthew Pherigo wrote: > >> Hey Mayuresh, >> >> There's actually a port in the tree already! 'pkg install hla' >> >> --Matt >> >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe wrote: >>> >>> has anyone been successful at working with randall hyde's high level >>> assembly toolkit under freebsd 10.x? >>> http://www.plantation-productions.com/Webster/ claims to have a >>> pre-built archive, but one that fails to assemble the binaries. :( >>> >>> ~mayuresh >>> >>> _______________________________________________ >>> >>> Is hla able to generate 64-bit machine code for amd64 ? It seems that it is for 32-bits , i.e. i386 . Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 05:45:07 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 39459FBD for ; Fri, 12 Jun 2015 05:45:07 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay5-d.mail.gandi.net (relay5-d.mail.gandi.net [IPv6:2001:4b98:c:538::197]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id EB5BF1B03 for ; Fri, 12 Jun 2015 05:45:06 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter30-d.gandi.net (mfilter30-d.gandi.net [217.70.178.161]) by relay5-d.mail.gandi.net (Postfix) with ESMTP id E293B41C08E; Fri, 12 Jun 2015 07:45:03 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter30-d.gandi.net Received: from relay5-d.mail.gandi.net ([217.70.183.197]) by mfilter30-d.gandi.net (mfilter30-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id h93uKJ+4NTxh; Fri, 12 Jun 2015 07:45:02 +0200 (CEST) X-Originating-IP: 10.58.1.149 Received: from webmail.gandi.net (webmail9-d.mgt.gandi.net [10.58.1.149]) (Authenticated sender: mayuresh@kathe.in) by relay5-d.mail.gandi.net (Postfix) with ESMTPA id 4C00241C09F; Fri, 12 Jun 2015 07:45:02 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Fri, 12 Jun 2015 11:15:02 +0530 From: Mayuresh Kathe To: Mehmet Erol Sanliturk Cc: Matthew Pherigo , FreeBSD Questions Mailing List Subject: Re: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> Message-ID: <6ee4e8712a7499dd3d703e540f46059b@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 05:45:07 -0000 On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: > On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe > wrote: > >> hi matthew, >> >> no luck, I got the following message; >> root@www:~ # pkg install hla >> Updating FreeBSD repository catalogue... >> FreeBSD repository is up-to-date. >> All repositories are up-to-date. >> pkg: No packages available to install matching 'hla' have been >> found in the repositories >> >> `uname -a` gives me the following; >> FreeBSD www.kathe.in [1] 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 >> #0: Wed May 13 06:54:13 UTC 2015 >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >> >> `freebsd-version` gives me the following; >> 10.1-RELEASE-p11 >> >> anything i might be doing wrong? >> >> ~mayuresh >> >> On 2015-06-12 09:26, Matthew Pherigo wrote: >> Hey Mayuresh, >> >> There's actually a port in the tree already! 'pkg install hla' >> >> --Matt >> >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >> wrote: >> >> has anyone been successful at working with randall hyde's high >> level assembly toolkit under freebsd 10.x? >> http://www.plantation-productions.com/Webster/ [2] claims to have a >> pre-built archive, but one that fails to assemble the binaries. :( >> >> ~mayuresh >> >> _______________________________________________ > > Is hla able to generate 64-bit machine code for amd64 ? > > It seems that it is for 32-bits , i.e. i386 . i have been able to run and test 'hla' under amd64 systems running ubuntu. any particular reason why it will not run under freebsd 64-bit? one of the things that could be a problem might be the "assembler" itself, i couldn't find "gas" or an equivalent under freebsd. ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 05:54:24 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 0208610E for ; Fri, 12 Jun 2015 05:54:24 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-ig0-x22a.google.com (mail-ig0-x22a.google.com [IPv6:2607:f8b0:4001:c05::22a]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id BD9471D38 for ; Fri, 12 Jun 2015 05:54:23 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: by igblz2 with SMTP id lz2so4826656igb.1 for ; Thu, 11 Jun 2015 22:54:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=9764IycDJqDUTTuaVYhe/e8Sy+g+L7AkPfOqSYkQT2c=; b=03/UI4Sk3370WoH0VWkRFG0zIhs3FLAYHVQj2yQRFjPXPtVFwGyRSzyLABZCKIOaFr U5oJKKG+B4/4Qo4sBYN6RSE0f8RuaMxzqdjlM4J1GB0UkPuCDmmH80yI9uWqt9YTDlNL aT3ML1cnNGHobSl4Mnij07qyAoLzq9jSJcYP41T9UJ27q9oA3FC6E4UXdp3GD0KrBduw 3VIEJv/DVLyDULjySMatDcPT+MbVHlh24sW41INH74qHRNfLlV074bdIGfONVYLDBiu/ CIQku5+eR1oi2DQyb3PqGMZL51izAeC3zSNh4DUMwZ1CzkmpmtSx3QM71WLoGk7xceB+ zPlg== MIME-Version: 1.0 X-Received: by 10.43.159.193 with SMTP id lz1mr14527018icc.26.1434088463080; Thu, 11 Jun 2015 22:54:23 -0700 (PDT) Received: by 10.65.15.33 with HTTP; Thu, 11 Jun 2015 22:54:23 -0700 (PDT) In-Reply-To: <6ee4e8712a7499dd3d703e540f46059b@kathe.in> References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> Date: Thu, 11 Jun 2015 22:54:23 -0700 Message-ID: Subject: Re: randall hyde's high level assembly! From: Mehmet Erol Sanliturk To: mayuresh@kathe.in Cc: Matthew Pherigo , FreeBSD Questions Mailing List Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 05:54:24 -0000 On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe wrote: > On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: > >> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >> wrote: >> >> hi matthew, >>> >>> no luck, I got the following message; >>> root@www:~ # pkg install hla >>> Updating FreeBSD repository catalogue... >>> FreeBSD repository is up-to-date. >>> All repositories are up-to-date. >>> pkg: No packages available to install matching 'hla' have been >>> found in the repositories >>> >>> `uname -a` gives me the following; >>> FreeBSD www.kathe.in [1] 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 >>> #0: Wed May 13 06:54:13 UTC 2015 >>> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >>> amd64 >>> >>> `freebsd-version` gives me the following; >>> 10.1-RELEASE-p11 >>> >>> anything i might be doing wrong? >>> >>> ~mayuresh >>> >>> On 2015-06-12 09:26, Matthew Pherigo wrote: >>> Hey Mayuresh, >>> >>> There's actually a port in the tree already! 'pkg install hla' >>> >>> --Matt >>> >>> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >>> wrote: >>> >>> has anyone been successful at working with randall hyde's high >>> level assembly toolkit under freebsd 10.x? >>> http://www.plantation-productions.com/Webster/ [2] claims to have a >>> pre-built archive, but one that fails to assemble the binaries. :( >>> >>> ~mayuresh >>> >>> _______________________________________________ >>> >> >> Is hla able to generate 64-bit machine code for amd64 ? >> >> It seems that it is for 32-bits , i.e. i386 . >> > > i have been able to run and test 'hla' under amd64 systems running ubuntu. > any particular reason why it will not run under freebsd 64-bit? > one of the things that could be a problem might be the "assembler" itself, > i couldn't find "gas" or an equivalent under freebsd. > > ~mayuresh > > Can you use Nasm ? *cd /usr/ports/devel/nasm**make install* http://forum.nasm.us/index.php?topic=1283.0 Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 06:37:55 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 488FE68E for ; Fri, 12 Jun 2015 06:37:55 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:c:538::195]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id CE5021783 for ; Fri, 12 Jun 2015 06:37:54 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter36-d.gandi.net (mfilter36-d.gandi.net [217.70.178.167]) by relay3-d.mail.gandi.net (Postfix) with ESMTP id 91B4AA80CD; Fri, 12 Jun 2015 08:37:50 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter36-d.gandi.net Received: from relay3-d.mail.gandi.net ([217.70.183.195]) by mfilter36-d.gandi.net (mfilter36-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id C8gRqR4tn3+4; Fri, 12 Jun 2015 08:37:49 +0200 (CEST) X-Originating-IP: 10.58.1.149 Received: from webmail.gandi.net (webmail9-d.mgt.gandi.net [10.58.1.149]) (Authenticated sender: mayuresh@kathe.in) by relay3-d.mail.gandi.net (Postfix) with ESMTPA id 14522A80AA; Fri, 12 Jun 2015 08:37:48 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Fri, 12 Jun 2015 12:07:48 +0530 From: Mayuresh Kathe To: Mehmet Erol Sanliturk Cc: Matthew Pherigo , FreeBSD Questions Mailing List Subject: Re: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> Message-ID: <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 06:37:55 -0000 On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: > On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe > wrote: > >> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >> wrote: >> >> hi matthew, >> >> no luck, I got the following message; >> root@www:~ # pkg install hla >> Updating FreeBSD repository catalogue... >> FreeBSD repository is up-to-date. >> All repositories are up-to-date. >> pkg: No packages available to install matching 'hla' have been >> found in the repositories >> >> `uname -a` gives me the following; >> FreeBSD www.kathe.in [1] [1] 10.1-RELEASE-p10 FreeBSD >> 10.1-RELEASE-p10 >> #0: Wed May 13 06:54:13 UTC 2015 >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >> >> `freebsd-version` gives me the following; >> 10.1-RELEASE-p11 >> >> anything i might be doing wrong? >> >> ~mayuresh >> >> On 2015-06-12 09:26, Matthew Pherigo wrote: >> Hey Mayuresh, >> >> There's actually a port in the tree already! 'pkg install hla' >> >> --Matt >> >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >> wrote: >> >> has anyone been successful at working with randall hyde's high >> level assembly toolkit under freebsd 10.x? >> http://www.plantation-productions.com/Webster/ [2] [2] claims to >> have a >> pre-built archive, but one that fails to assemble the binaries. :( >> >> ~mayuresh >> >> _______________________________________________ >> >> Is hla able to generate 64-bit machine code for amd64 ? >> >> It seems that it is for 32-bits , i.e. i386 . > > i have been able to run and test 'hla' under amd64 systems running > ubuntu. > any particular reason why it will not run under freebsd 64-bit? > one of the things that could be a problem might be the "assembler" > itself, i couldn't find "gas" or an equivalent under freebsd. > > ~mayuresh > > Can you use Nasm ? > > CD /USR/PORTS/DEVEL/NASM > MAKE INSTALL > > http://forum.nasm.us/index.php?topic=1283.0 [3] thanks for that tip mehmet, much appreciate it. i hadn't known about "nasm", looking it up led me to a book on assembly language programming by jeff duntemann, which seems to be a lot more realistic than the one by randall hyde. again, thanks a million mehmet. :) ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 06:55:22 2015 Return-Path: Delivered-To: questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 550CD854 for ; Fri, 12 Jun 2015 06:55:22 +0000 (UTC) (envelope-from ml@netfence.it) Received: from smtp208.alice.it (smtp208.alice.it [82.57.200.104]) by mx1.freebsd.org (Postfix) with ESMTP id D97E71BFE for ; Fri, 12 Jun 2015 06:55:21 +0000 (UTC) (envelope-from ml@netfence.it) Received: from soth.ventu (82.52.27.173) by smtp208.alice.it (8.6.060.28) (authenticated as acanedi@alice.it) id 552F94A60B78FCDC for questions@freebsd.org; Fri, 12 Jun 2015 08:55:13 +0200 Received: from alamar.ventu (alamar.ventu [10.1.2.18]) by soth.ventu (8.15.1/8.14.9) with ESMTP id t5C6tC6U041309 for ; Fri, 12 Jun 2015 08:55:13 +0200 (CEST) (envelope-from ml@netfence.it) Message-ID: <557A8250.1080405@netfence.it> Date: Fri, 12 Jun 2015 08:55:12 +0200 From: Andrea Venturoli User-Agent: Mozilla/5.0 (X11; FreeBSD i386; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: questions@freebsd.org Subject: Half OT: controlling TimeMachine Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 06:55:22 -0000 Hello. I understand this is half OT, but, on the other hand, the "manager" would be a FreeBSD box :) I've got a network with several Macs, all of which are doing backups with TimeMachine to USB disks and/or NASes. Does anyone know of any way to "centralize" TM management? By "centralize" I mean: get reports, control scheduling, possibly fine tune retention, ecc... Right now I've put up some quick&dirty scripts which partially achieve this, but the way to go is long... I'm thinking about starting an open-source project with this, in case anyone is interested and want to help, but of course, if any suitable thing (which I did not find) already exists, this would be pointless. bye & Thanks av. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 09:41:57 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 253D6836 for ; Fri, 12 Jun 2015 09:41:57 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-ie0-x234.google.com (mail-ie0-x234.google.com [IPv6:2607:f8b0:4001:c03::234]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id DD26B192D for ; Fri, 12 Jun 2015 09:41:56 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: by iebps5 with SMTP id ps5so21054220ieb.3 for ; Fri, 12 Jun 2015 02:41:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=QTP4vlA04bkByusR8yy+dKc4kjPXL/6JVTiqtEaYJCk=; b=JjLGwz10Wwy+7tmaWqAmLbTimV/dUSzrXeW9qCfaOxGeaWAmRoLc3edOR/RqXRQ7+5 COXLj3TJvRnG5/NdEIZM8PgQkaRP8BosCsZNYGcwhvu8Uuo7OS+pZ8Hod8ypcaN5JoX6 /bLXuNwzSmfiWmJO4mWnnrtRSW12irlo+rfKChlRF3GKvCzbgbiU9Usv+XRdz77ID9d3 LnJY+7v9+tIWfsWZHfft5lJ1tz8FNmuBiaJeBFB9ELWrsJXZLEHOQDw6Sl80G2yjo1OD OvYtfMoHMNLXlUK0ss014RG83YDhSC0zpdvadFUyfXWPzmoj1ybC/u9b0uLeoGr89xUX Mtcw== MIME-Version: 1.0 X-Received: by 10.42.43.199 with SMTP id y7mr15328276ice.12.1434102116077; Fri, 12 Jun 2015 02:41:56 -0700 (PDT) Received: by 10.65.15.33 with HTTP; Fri, 12 Jun 2015 02:41:55 -0700 (PDT) In-Reply-To: <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> Date: Fri, 12 Jun 2015 02:41:55 -0700 Message-ID: Subject: Re: randall hyde's high level assembly! From: Mehmet Erol Sanliturk To: mayuresh@kathe.in Cc: Matthew Pherigo , FreeBSD Questions Mailing List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 09:41:57 -0000 On Thu, Jun 11, 2015 at 11:37 PM, Mayuresh Kathe wrote: > On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: > >> On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe >> wrote: >> >> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >>> wrote: >>> >>> hi matthew, >>> >>> no luck, I got the following message; >>> root@www:~ # pkg install hla >>> Updating FreeBSD repository catalogue... >>> FreeBSD repository is up-to-date. >>> All repositories are up-to-date. >>> pkg: No packages available to install matching 'hla' have been >>> found in the repositories >>> >>> `uname -a` gives me the following; >>> FreeBSD www.kathe.in [1] [1] 10.1-RELEASE-p10 FreeBSD >>> 10.1-RELEASE-p10 >>> #0: Wed May 13 06:54:13 UTC 2015 >>> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >>> amd64 >>> >>> `freebsd-version` gives me the following; >>> 10.1-RELEASE-p11 >>> >>> anything i might be doing wrong? >>> >>> ~mayuresh >>> >>> On 2015-06-12 09:26, Matthew Pherigo wrote: >>> Hey Mayuresh, >>> >>> There's actually a port in the tree already! 'pkg install hla' >>> >>> --Matt >>> >>> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >>> wrote: >>> >>> has anyone been successful at working with randall hyde's high >>> level assembly toolkit under freebsd 10.x? >>> http://www.plantation-productions.com/Webster/ [2] [2] claims to >>> have a >>> pre-built archive, but one that fails to assemble the binaries. :( >>> >>> ~mayuresh >>> >>> _______________________________________________ >>> >>> Is hla able to generate 64-bit machine code for amd64 ? >>> >>> It seems that it is for 32-bits , i.e. i386 . >>> >> >> i have been able to run and test 'hla' under amd64 systems running >> ubuntu. >> any particular reason why it will not run under freebsd 64-bit? >> one of the things that could be a problem might be the "assembler" >> itself, i couldn't find "gas" or an equivalent under freebsd. >> >> ~mayuresh >> >> Can you use Nasm ? >> >> CD /USR/PORTS/DEVEL/NASM >> MAKE INSTALL >> >> http://forum.nasm.us/index.php?topic=3D1283.0 [3] >> > > thanks for that tip mehmet, much appreciate it. > > i hadn't known about "nasm", looking it up led me to a book on assembly > language programming by jeff duntemann, which seems to be a lot more > realistic than the one by randall hyde. > > again, thanks a million mehmet. :) > > ~mayuresh > > 64 bits operating systems are different from 32 bits operating systems . During working with assemblers , it is necessary to distinguish this feature . In a 64 bits operating system , if 32 bits programs will be used , it is necessary to have 32 bits libraries and support by the operating system . This means that you can not execute 32 bits programs in a 64 bits operating system without such support . In the following page : http://www.duntemann.com/assembly.html read "If You Have a 64-Bit PC..." the especially . "64-Bit PC" is misleading : It should be "64-Bit Operating System" . Both Intel and AMD x86 processors mainly support both 32 and 64 bit operating systems : They are able to execute 32 and 64 bit instructions . Therefore , important points are bit size of ( 32 or 64 ) operating system , and handling capability of this feature by compilers and availability of libraries , and support by the operating system . It is necessary to have information about 64 bit assembly programming in an 64 bit operating system . http://www.amazon.com/Introduction-Intel-Assembly-Language-Programming/dp/1= 478119209/ref=3Dpd_sim_14_1?ie=3DUTF8&refRID=3D15NZ1SBWCZAMH1X6KPZG Introduction to 64 Bit Intel Assembly Language Programming for Linux: Second Edition Paperback =E2=80=93 June 23, 2012 by Benjamin Ray Seyfarth (Author) Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 10:02:32 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 59B86C54 for ; Fri, 12 Jun 2015 10:02:32 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay5-d.mail.gandi.net (relay5-d.mail.gandi.net [IPv6:2001:4b98:c:538::197]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 03AF61E10 for ; Fri, 12 Jun 2015 10:02:31 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter4-d.gandi.net (mfilter4-d.gandi.net [217.70.178.134]) by relay5-d.mail.gandi.net (Postfix) with ESMTP id E26BF41C2E1; Fri, 12 Jun 2015 12:02:29 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter4-d.gandi.net Received: from relay5-d.mail.gandi.net ([217.70.183.197]) by mfilter4-d.gandi.net (mfilter4-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id 1WI7IW4gQzde; Fri, 12 Jun 2015 12:02:28 +0200 (CEST) X-Originating-IP: 10.58.1.149 Received: from webmail.gandi.net (webmail9-d.mgt.gandi.net [10.58.1.149]) (Authenticated sender: mayuresh@kathe.in) by relay5-d.mail.gandi.net (Postfix) with ESMTPA id 3572841C371; Fri, 12 Jun 2015 12:02:28 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Date: Fri, 12 Jun 2015 15:32:28 +0530 From: Mayuresh Kathe To: Mehmet Erol Sanliturk Cc: Matthew Pherigo , FreeBSD Questions Mailing List Subject: Re: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> Message-ID: <6228039c427b13187bfdf347b1771b10@kathe.in> X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 10:02:32 -0000 On 2015-06-12 15:11, Mehmet Erol Sanliturk wrote: > On Thu, Jun 11, 2015 at 11:37 PM, Mayuresh Kathe > wrote: >=20 >> On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe >> >> wrote: >>=20 >> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >> wrote: >>=20 >> hi matthew, >>=20 >> no luck, I got the following message; >> root@www:~ # pkg install hla >> Updating FreeBSD repository catalogue... >> FreeBSD repository is up-to-date. >> All repositories are up-to-date. >> pkg: No packages available to install matching 'hla' have been >> found in the repositories >>=20 >> `uname -a` gives me the following; >> FreeBSD www.kathe.in [1] [1] [1] 10.1-RELEASE-p10 FreeBSD >> 10.1-RELEASE-p10 >> #0: Wed May 13 06:54:13 UTC 2015 >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >>=20 >> `freebsd-version` gives me the following; >> 10.1-RELEASE-p11 >>=20 >> anything i might be doing wrong? >>=20 >> ~mayuresh >>=20 >> On 2015-06-12 09:26, Matthew Pherigo wrote: >> Hey Mayuresh, >>=20 >> There's actually a port in the tree already! 'pkg install hla' >>=20 >> --Matt >>=20 >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >> wrote: >>=20 >> has anyone been successful at working with randall hyde's high >> level assembly toolkit under freebsd 10.x? >> http://www.plantation-productions.com/Webster/ [2] [2] [2] claims >> to >> have a >> pre-built archive, but one that fails to assemble the binaries. :( >>=20 >> ~mayuresh >>=20 >> _______________________________________________ >>=20 >> Is hla able to generate 64-bit machine code for amd64 ? >>=20 >> It seems that it is for 32-bits , i.e. i386 . >>=20 >> i have been able to run and test 'hla' under amd64 systems running >> ubuntu. >> any particular reason why it will not run under freebsd 64-bit? >> one of the things that could be a problem might be the "assembler" >> itself, i couldn't find "gas" or an equivalent under freebsd. >>=20 >> ~mayuresh >>=20 >> Can you use Nasm ? >>=20 >> CD /USR/PORTS/DEVEL/NASM >> MAKE INSTALL >>=20 >> http://forum.nasm.us/index.php?topic=3D1283.0 [3] [3] >=20 > thanks for that tip mehmet, much appreciate it. >=20 > i hadn't known about "nasm", looking it up led me to a book on > assembly language programming by jeff duntemann, which seems to be a > lot more realistic than the one by randall hyde. >=20 > again, thanks a million mehmet. :) >=20 > ~mayuresh >=20 > 64 bits operating systems are different from 32 bits operating systems > . >=20 > During working with assemblers , it is necessary to distinguish this > feature . >=20 > In a 64 bits operating system , if 32 bits programs will be used , it > is necessary to have 32 bits libraries and support by the operating > system . >=20 > This means that you can not execute 32 bits programs in a 64 bits > operating system without such support . >=20 > In the following page : >=20 > http://www.duntemann.com/assembly.html [4] >=20 > read >=20 > "If You Have a 64-Bit PC..." >=20 > the especially . >=20 > "64-Bit PC" is misleading : It should be "64-Bit Operating System" . >=20 > Both Intel and AMD x86 processors mainly support both 32 and 64 bit > operating systems : They are able to execute 32 and 64 bit > instructions . >=20 > Therefore , important points are bit size of ( 32 or 64 ) operating > system , and handling capability of this feature by compilers and > availability of libraries , and support by the operating system . >=20 > It is necessary to have information about 64 bit assembly programming > in an 64 bit operating system . >=20 > http://www.amazon.com/Introduction-Intel-Assembly-Language-Programming/= dp/1478119209/ref=3Dpd_sim_14_1?ie=3DUTF8&refRID=3D15NZ1SBWCZAMH1X6KPZG > [5] >=20 > Introduction to 64 Bit Intel Assembly Language Programming for Linux: > Second Edition Paperback =E2=80=93 June 23, 2012 > by Benjamin Ray Seyfarth (Author) mehmet, thanks for the link to that book by benjamin ray seyfarth. my objective for learning assembly was to understand the inner workings=20 of the machine, but i guess that could get accomplished with a good=20 understanding of "machine organization". randall hyde's "write great code (vol 1)" is an excellent book on=20 "machine organization", just that one of the languages used for example=20 code is 'hla' and hence my inquiry into support for running 'hla' under=20 freebsd. best, ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 10:14:02 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 19D3191 for ; Fri, 12 Jun 2015 10:14:02 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-ig0-x232.google.com (mail-ig0-x232.google.com [IPv6:2607:f8b0:4001:c05::232]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id D9C0F1063 for ; Fri, 12 Jun 2015 10:14:01 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: by igbzc4 with SMTP id zc4so8731946igb.0 for ; Fri, 12 Jun 2015 03:14:01 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=R+teiUQvfCcMK+N7hTOPEn8bMYFwrnTh1OVkIZhFg0k=; b=FPOYiiciPKA/BrdYTYJOxto1qoMk5n5WqJ8KcAY+Gb7mde/TAguFCRkYQYLwwTmXPQ qlzB9bGov95qfv8Q1i6qkPuSzR80NU0u9sYZfciLgmDf7ZbLfRz+7DTfKhZdwNbLfvk/ mr7fCC7EUp40O4m9y/B1i+626j8JaWTEKoiT41t4z+YO+lnqiA57h1RNwaG6W1tGjKl7 TCZhpAxqKtPqW6rjSjp8vkwERCK/h9qrzSu9SuBGqncehSgXS/uwkn0Uea3fhVXHbdS6 16qLPPIgw4Zr1bBUJbtKsZ5Je2AXTuULEu4zVyv9C/hQiYH4TXj0/rWC15hDbDbex5dx OGYQ== MIME-Version: 1.0 X-Received: by 10.107.134.17 with SMTP id i17mr644681iod.75.1434104041174; Fri, 12 Jun 2015 03:14:01 -0700 (PDT) Received: by 10.65.15.33 with HTTP; Fri, 12 Jun 2015 03:14:01 -0700 (PDT) In-Reply-To: <6228039c427b13187bfdf347b1771b10@kathe.in> References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> <6228039c427b13187bfdf347b1771b10@kathe.in> Date: Fri, 12 Jun 2015 03:14:01 -0700 Message-ID: Subject: Re: randall hyde's high level assembly! From: Mehmet Erol Sanliturk To: mayuresh@kathe.in Cc: Matthew Pherigo , FreeBSD Questions Mailing List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 10:14:02 -0000 On Fri, Jun 12, 2015 at 3:02 AM, Mayuresh Kathe wrote: > On 2015-06-12 15:11, Mehmet Erol Sanliturk wrote: > >> On Thu, Jun 11, 2015 at 11:37 PM, Mayuresh Kathe >> wrote: >> >> On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe >>> >>> wrote: >>> >>> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >>> wrote: >>> >>> hi matthew, >>> >>> no luck, I got the following message; >>> root@www:~ # pkg install hla >>> Updating FreeBSD repository catalogue... >>> FreeBSD repository is up-to-date. >>> All repositories are up-to-date. >>> pkg: No packages available to install matching 'hla' have been >>> found in the repositories >>> >>> `uname -a` gives me the following; >>> FreeBSD www.kathe.in [1] [1] [1] 10.1-RELEASE-p10 FreeBSD >>> 10.1-RELEASE-p10 >>> #0: Wed May 13 06:54:13 UTC 2015 >>> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >>> amd64 >>> >>> `freebsd-version` gives me the following; >>> 10.1-RELEASE-p11 >>> >>> anything i might be doing wrong? >>> >>> ~mayuresh >>> >>> On 2015-06-12 09:26, Matthew Pherigo wrote: >>> Hey Mayuresh, >>> >>> There's actually a port in the tree already! 'pkg install hla' >>> >>> --Matt >>> >>> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >>> wrote: >>> >>> has anyone been successful at working with randall hyde's high >>> level assembly toolkit under freebsd 10.x? >>> http://www.plantation-productions.com/Webster/ [2] [2] [2] claims >>> to >>> have a >>> pre-built archive, but one that fails to assemble the binaries. :( >>> >>> ~mayuresh >>> >>> _______________________________________________ >>> >>> Is hla able to generate 64-bit machine code for amd64 ? >>> >>> It seems that it is for 32-bits , i.e. i386 . >>> >>> i have been able to run and test 'hla' under amd64 systems running >>> ubuntu. >>> any particular reason why it will not run under freebsd 64-bit? >>> one of the things that could be a problem might be the "assembler" >>> itself, i couldn't find "gas" or an equivalent under freebsd. >>> >>> ~mayuresh >>> >>> Can you use Nasm ? >>> >>> CD /USR/PORTS/DEVEL/NASM >>> MAKE INSTALL >>> >>> http://forum.nasm.us/index.php?topic=3D1283.0 [3] [3] >>> >> >> thanks for that tip mehmet, much appreciate it. >> >> i hadn't known about "nasm", looking it up led me to a book on >> assembly language programming by jeff duntemann, which seems to be a >> lot more realistic than the one by randall hyde. >> >> again, thanks a million mehmet. :) >> >> ~mayuresh >> >> 64 bits operating systems are different from 32 bits operating systems >> . >> >> During working with assemblers , it is necessary to distinguish this >> feature . >> >> In a 64 bits operating system , if 32 bits programs will be used , it >> is necessary to have 32 bits libraries and support by the operating >> system . >> >> This means that you can not execute 32 bits programs in a 64 bits >> operating system without such support . >> >> In the following page : >> >> http://www.duntemann.com/assembly.html [4] >> >> read >> >> "If You Have a 64-Bit PC..." >> >> the especially . >> >> "64-Bit PC" is misleading : It should be "64-Bit Operating System" . >> >> Both Intel and AMD x86 processors mainly support both 32 and 64 bit >> operating systems : They are able to execute 32 and 64 bit >> instructions . >> >> Therefore , important points are bit size of ( 32 or 64 ) operating >> system , and handling capability of this feature by compilers and >> availability of libraries , and support by the operating system . >> >> It is necessary to have information about 64 bit assembly programming >> in an 64 bit operating system . >> >> >> http://www.amazon.com/Introduction-Intel-Assembly-Language-Programming/d= p/1478119209/ref=3Dpd_sim_14_1?ie=3DUTF8&refRID=3D15NZ1SBWCZAMH1X6KPZG >> [5] >> >> Introduction to 64 Bit Intel Assembly Language Programming for Linux: >> Second Edition Paperback =E2=80=93 June 23, 2012 >> by Benjamin Ray Seyfarth (Author) >> > > mehmet, thanks for the link to that book by benjamin ray seyfarth. > > my objective for learning assembly was to understand the inner workings o= f > the machine, but i guess that could get accomplished with a good > understanding of "machine organization". > > randall hyde's "write great code (vol 1)" is an excellent book on "machin= e > organization", just that one of the languages used for example code is > 'hla' and hence my inquiry into support for running 'hla' under freebsd. > > best, > > ~mayuresh > > Using a widely adopted and supported by a community assembler such as "nasm" is much better than using a special purpose assembler ( for me with very useless statement kinds ) such as "hla" is a better approach when portability and maintainability of written sources over time is considered = . I have look at the "hla" many times and come to a conclusion "never use it" . If a high level language is required , "C" may be used . Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 10:28:01 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id E6FC634E for ; Fri, 12 Jun 2015 10:28:00 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [IPv6:2001:4b98:c:538::198]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 94E75133E for ; Fri, 12 Jun 2015 10:28:00 +0000 (UTC) (envelope-from mayuresh@kathe.in) Received: from mfilter11-d.gandi.net (mfilter11-d.gandi.net [217.70.178.131]) by relay6-d.mail.gandi.net (Postfix) with ESMTP id 9D6B3FBBE8; Fri, 12 Jun 2015 12:27:58 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at mfilter11-d.gandi.net Received: from relay6-d.mail.gandi.net ([217.70.183.198]) by mfilter11-d.gandi.net (mfilter11-d.gandi.net [10.0.15.180]) (amavisd-new, port 10024) with ESMTP id YOCyEpVy1cVO; Fri, 12 Jun 2015 12:27:57 +0200 (CEST) X-Originating-IP: 10.58.1.149 Received: from webmail.gandi.net (webmail9-d.mgt.gandi.net [10.58.1.149]) (Authenticated sender: mayuresh@kathe.in) by relay6-d.mail.gandi.net (Postfix) with ESMTPA id DBFC5FBB3C; Fri, 12 Jun 2015 12:27:56 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Date: Fri, 12 Jun 2015 15:57:56 +0530 From: Mayuresh Kathe To: Mehmet Erol Sanliturk Cc: Matthew Pherigo , FreeBSD Questions Mailing List Subject: Re: randall hyde's high level assembly! Reply-To: mayuresh@kathe.in Mail-Reply-To: mayuresh@kathe.in In-Reply-To: References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> <6228039c427b13187bfdf347b1771b10@kathe.in> Message-ID: X-Sender: mayuresh@kathe.in User-Agent: Roundcube Webmail/1.1.1 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 10:28:01 -0000 On 2015-06-12 15:44, Mehmet Erol Sanliturk wrote: > On Fri, Jun 12, 2015 at 3:02 AM, Mayuresh Kathe > wrote: >=20 >> On 2015-06-12 15:11, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 11:37 PM, Mayuresh Kathe >> >> wrote: >>=20 >> On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe >> >> wrote: >>=20 >> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >> wrote: >>=20 >> hi matthew, >>=20 >> no luck, I got the following message; >> root@www:~ # pkg install hla >> Updating FreeBSD repository catalogue... >> FreeBSD repository is up-to-date. >> All repositories are up-to-date. >> pkg: No packages available to install matching 'hla' have been >> found in the repositories >>=20 >> `uname -a` gives me the following; >> FreeBSD www.kathe.in [1] [1] [1] [1] 10.1-RELEASE-p10 FreeBSD >> 10.1-RELEASE-p10 >> #0: Wed May 13 06:54:13 UTC 2015 >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >> amd64 >>=20 >> `freebsd-version` gives me the following; >> 10.1-RELEASE-p11 >>=20 >> anything i might be doing wrong? >>=20 >> ~mayuresh >>=20 >> On 2015-06-12 09:26, Matthew Pherigo wrote: >> Hey Mayuresh, >>=20 >> There's actually a port in the tree already! 'pkg install hla' >>=20 >> --Matt >>=20 >> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >> wrote: >>=20 >> has anyone been successful at working with randall hyde's high >> level assembly toolkit under freebsd 10.x? >> http://www.plantation-productions.com/Webster/ [2] [2] [2] [2] >> claims >> to >> have a >> pre-built archive, but one that fails to assemble the binaries. :( >>=20 >> ~mayuresh >>=20 >> _______________________________________________ >>=20 >> Is hla able to generate 64-bit machine code for amd64 ? >>=20 >> It seems that it is for 32-bits , i.e. i386 . >>=20 >> i have been able to run and test 'hla' under amd64 systems running >> ubuntu. >> any particular reason why it will not run under freebsd 64-bit? >> one of the things that could be a problem might be the "assembler" >> itself, i couldn't find "gas" or an equivalent under freebsd. >>=20 >> ~mayuresh >>=20 >> Can you use Nasm ? >>=20 >> CD /USR/PORTS/DEVEL/NASM >> MAKE INSTALL >>=20 >> http://forum.nasm.us/index.php?topic=3D1283.0 [3] [3] [3] >>=20 >> thanks for that tip mehmet, much appreciate it. >>=20 >> i hadn't known about "nasm", looking it up led me to a book on >> assembly language programming by jeff duntemann, which seems to be >> a >> lot more realistic than the one by randall hyde. >>=20 >> again, thanks a million mehmet. :) >>=20 >> ~mayuresh >>=20 >> 64 bits operating systems are different from 32 bits operating >> systems >> . >>=20 >> During working with assemblers , it is necessary to distinguish >> this >> feature . >>=20 >> In a 64 bits operating system , if 32 bits programs will be used , >> it >> is necessary to have 32 bits libraries and support by the operating >> system . >>=20 >> This means that you can not execute 32 bits programs in a 64 bits >> operating system without such support . >>=20 >> In the following page : >>=20 >> http://www.duntemann.com/assembly.html [4] [4] >>=20 >> read >>=20 >> "If You Have a 64-Bit PC..." >>=20 >> the especially . >>=20 >> "64-Bit PC" is misleading : It should be "64-Bit Operating System" >> . >>=20 >> Both Intel and AMD x86 processors mainly support both 32 and 64 bit >> operating systems : They are able to execute 32 and 64 bit >> instructions . >>=20 >> Therefore , important points are bit size of ( 32 or 64 ) operating >> system , and handling capability of this feature by compilers and >> availability of libraries , and support by the operating system . >>=20 >> It is necessary to have information about 64 bit assembly >> programming >> in an 64 bit operating system . >>=20 >>=20 > http://www.amazon.com/Introduction-Intel-Assembly-Language-Programming/= dp/1478119209/ref=3Dpd_sim_14_1?ie=3DUTF8&refRID=3D15NZ1SBWCZAMH1X6KPZG >> [5] >> [5] >>=20 >> Introduction to 64 Bit Intel Assembly Language Programming for >> Linux: >> Second Edition Paperback =E2=80=93 June 23, 2012 >> by Benjamin Ray Seyfarth (Author) >=20 > mehmet, thanks for the link to that book by benjamin ray seyfarth. >=20 > my objective for learning assembly was to understand the inner > workings of the machine, but i guess that could get accomplished with > a good understanding of "machine organization". >=20 > randall hyde's "write great code (vol 1)" is an excellent book on > "machine organization", just that one of the languages used for > example code is 'hla' and hence my inquiry into support for running > 'hla' under freebsd. >=20 > best, >=20 > ~mayuresh >=20 > Using a widely adopted and supported by a community assembler such as > "nasm" is much better than using a special purpose assembler ( for me > with very useless statement kinds ) such as "hla" is a better approach > when portability and maintainability of written sources over time is > considered . >=20 > I have look at the "hla" many times and come to a conclusion "never > use it" . >=20 > If a high level language is required , "C" may be used . yes, agreed about the impractical nature of 'hla', but for me, it's an=20 educational tool, just like scheme. i am yet to see a lot of large industrial grade software applications=20 written in scheme, except perhaps "emacs". ;) btw, how did you get 'hla' to work under freebsd? was it under the 10.x=20 series? ~mayuresh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 10:44:43 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 86A6DC62 for ; Fri, 12 Jun 2015 10:44:43 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: from mail-ig0-x22e.google.com (mail-ig0-x22e.google.com [IPv6:2607:f8b0:4001:c05::22e]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 483B31988 for ; Fri, 12 Jun 2015 10:44:43 +0000 (UTC) (envelope-from m.e.sanliturk@gmail.com) Received: by igbpi8 with SMTP id pi8so9144052igb.1 for ; Fri, 12 Jun 2015 03:44:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=KfTufNPkw/USI98vH4IlDZW1cQOxZdxlk/xIxwGvp2w=; b=G94jnWVIierHG9EUiLbprvj4HDh7pU1ypjzbHL+YXG5eE5v3LH2eMUdTqPppYUbt/t ythze1nKh4AQG36h82cE6pZuDcM8+ENDvY47dXdGlw50YopgV/Ed8oVZ+QFQmMFjiAss 8i5ha3hNK3XrSXMvNjF1ivP42DeS7QpXPr6jxrr05eCGHWC/Yozp1E2IRs7aezjdpPkX 6OhOu4d1skPk0h072ZQeoFt4gGzYgwgJWi+mmuFDQdlxeE7FtqbJ3MjQpOfGVOMrRLsn SyzyHpvT0LZ11J/UQ3KcoxeSjuDhSvgOPagY1GvsY7Ig3e8g0q3bDxnCfax1GrOfl1S+ q6pQ== MIME-Version: 1.0 X-Received: by 10.107.7.37 with SMTP id 37mr16815906ioh.28.1434105882409; Fri, 12 Jun 2015 03:44:42 -0700 (PDT) Received: by 10.65.15.33 with HTTP; Fri, 12 Jun 2015 03:44:42 -0700 (PDT) In-Reply-To: References: <731c3f79950e679799b5f8078a5ba7f0@kathe.in> <917AE52A-45E0-42CB-A6A8-40BAAE318CC9@gmail.com> <1c5f3e6e3cafb9022d257afcce1757b3@kathe.in> <6ee4e8712a7499dd3d703e540f46059b@kathe.in> <23f251dd1a66d0a88ed041ae2593cb98@kathe.in> <6228039c427b13187bfdf347b1771b10@kathe.in> Date: Fri, 12 Jun 2015 03:44:42 -0700 Message-ID: Subject: Re: randall hyde's high level assembly! From: Mehmet Erol Sanliturk To: mayuresh@kathe.in Cc: Matthew Pherigo , FreeBSD Questions Mailing List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 10:44:43 -0000 On Fri, Jun 12, 2015 at 3:27 AM, Mayuresh Kathe wrote: > On 2015-06-12 15:44, Mehmet Erol Sanliturk wrote: > >> On Fri, Jun 12, 2015 at 3:02 AM, Mayuresh Kathe >> wrote: >> >> On 2015-06-12 15:11, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 11:37 PM, Mayuresh Kathe >>> >>> wrote: >>> >>> On 2015-06-12 11:24, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 10:45 PM, Mayuresh Kathe >>> >>> wrote: >>> >>> On 2015-06-12 11:04, Mehmet Erol Sanliturk wrote: >>> On Thu, Jun 11, 2015 at 9:29 PM, Mayuresh Kathe >>> wrote: >>> >>> hi matthew, >>> >>> no luck, I got the following message; >>> root@www:~ # pkg install hla >>> Updating FreeBSD repository catalogue... >>> FreeBSD repository is up-to-date. >>> All repositories are up-to-date. >>> pkg: No packages available to install matching 'hla' have been >>> found in the repositories >>> >>> `uname -a` gives me the following; >>> FreeBSD www.kathe.in [1] [1] [1] [1] 10.1-RELEASE-p10 FreeBSD >>> 10.1-RELEASE-p10 >>> #0: Wed May 13 06:54:13 UTC 2015 >>> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >>> amd64 >>> >>> `freebsd-version` gives me the following; >>> 10.1-RELEASE-p11 >>> >>> anything i might be doing wrong? >>> >>> ~mayuresh >>> >>> On 2015-06-12 09:26, Matthew Pherigo wrote: >>> Hey Mayuresh, >>> >>> There's actually a port in the tree already! 'pkg install hla' >>> >>> --Matt >>> >>> On Jun 11, 2015, at 5:52 AM, Mayuresh Kathe >>> wrote: >>> >>> has anyone been successful at working with randall hyde's high >>> level assembly toolkit under freebsd 10.x? >>> http://www.plantation-productions.com/Webster/ [2] [2] [2] [2] >>> claims >>> to >>> have a >>> pre-built archive, but one that fails to assemble the binaries. :( >>> >>> ~mayuresh >>> >>> _______________________________________________ >>> >>> Is hla able to generate 64-bit machine code for amd64 ? >>> >>> It seems that it is for 32-bits , i.e. i386 . >>> >>> i have been able to run and test 'hla' under amd64 systems running >>> ubuntu. >>> any particular reason why it will not run under freebsd 64-bit? >>> one of the things that could be a problem might be the "assembler" >>> itself, i couldn't find "gas" or an equivalent under freebsd. >>> >>> ~mayuresh >>> >>> Can you use Nasm ? >>> >>> CD /USR/PORTS/DEVEL/NASM >>> MAKE INSTALL >>> >>> http://forum.nasm.us/index.php?topic=3D1283.0 [3] [3] [3] >>> >>> thanks for that tip mehmet, much appreciate it. >>> >>> i hadn't known about "nasm", looking it up led me to a book on >>> assembly language programming by jeff duntemann, which seems to be >>> a >>> lot more realistic than the one by randall hyde. >>> >>> again, thanks a million mehmet. :) >>> >>> ~mayuresh >>> >>> 64 bits operating systems are different from 32 bits operating >>> systems >>> . >>> >>> During working with assemblers , it is necessary to distinguish >>> this >>> feature . >>> >>> In a 64 bits operating system , if 32 bits programs will be used , >>> it >>> is necessary to have 32 bits libraries and support by the operating >>> system . >>> >>> This means that you can not execute 32 bits programs in a 64 bits >>> operating system without such support . >>> >>> In the following page : >>> >>> http://www.duntemann.com/assembly.html [4] [4] >>> >>> read >>> >>> "If You Have a 64-Bit PC..." >>> >>> the especially . >>> >>> "64-Bit PC" is misleading : It should be "64-Bit Operating System" >>> . >>> >>> Both Intel and AMD x86 processors mainly support both 32 and 64 bit >>> operating systems : They are able to execute 32 and 64 bit >>> instructions . >>> >>> Therefore , important points are bit size of ( 32 or 64 ) operating >>> system , and handling capability of this feature by compilers and >>> availability of libraries , and support by the operating system . >>> >>> It is necessary to have information about 64 bit assembly >>> programming >>> in an 64 bit operating system . >>> >>> >>> >> http://www.amazon.com/Introduction-Intel-Assembly-Language-Programming/d= p/1478119209/ref=3Dpd_sim_14_1?ie=3DUTF8&refRID=3D15NZ1SBWCZAMH1X6KPZG >> >>> [5] >>> [5] >>> >>> Introduction to 64 Bit Intel Assembly Language Programming for >>> Linux: >>> Second Edition Paperback =E2=80=93 June 23, 2012 >>> by Benjamin Ray Seyfarth (Author) >>> >> >> mehmet, thanks for the link to that book by benjamin ray seyfarth. >> >> my objective for learning assembly was to understand the inner >> workings of the machine, but i guess that could get accomplished with >> a good understanding of "machine organization". >> >> randall hyde's "write great code (vol 1)" is an excellent book on >> "machine organization", just that one of the languages used for >> example code is 'hla' and hence my inquiry into support for running >> 'hla' under freebsd. >> >> best, >> >> ~mayuresh >> >> Using a widely adopted and supported by a community assembler such as >> "nasm" is much better than using a special purpose assembler ( for me >> with very useless statement kinds ) such as "hla" is a better approach >> when portability and maintainability of written sources over time is >> considered . >> >> I have look at the "hla" many times and come to a conclusion "never >> use it" . >> >> If a high level language is required , "C" may be used . >> > > yes, agreed about the impractical nature of 'hla', but for me, it's an > educational tool, just like scheme. > i am yet to see a lot of large industrial grade software applications > written in scheme, except perhaps "emacs". ;) > btw, how did you get 'hla' to work under freebsd? was it under the 10.x > series? > > ~mayuresh > > I never use assembly programming . For a 64 bit code generation program I will use "nasm" . Even as an educational tool , do not waste your time and efforts by using "hla" . Select "nasm" if you need to use an assembler exactly and use "C" as much as possible for low level hardware programming . Always use "Standard" definitions for programming languages , avoid "extensions" and "modifications" just like escaping from a very dangerous poisonous snake . Over time , all of such "extensions" will be a very difficult to rescue yourself "nightmare" . Thank you very much . Mehmet Erol Sanliturk From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 14:34:59 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 13EAA907 for ; Fri, 12 Jun 2015 14:34:59 +0000 (UTC) (envelope-from ana5.bestschools@gmail.com) Received: from mailer96.gate86.rs.smtp.com (mailer96.gate86.rs.smtp.com [74.91.86.96]) by mx1.freebsd.org (Postfix) with ESMTP id D09DBC4F for ; Fri, 12 Jun 2015 14:34:58 +0000 (UTC) (envelope-from ana5.bestschools@gmail.com) X-MSFBL: ZnJlZWJzZC1xdWVzdGlvbnNAZnJlZWJzZC5vcmdANzRfOTFfODZfOTZAbWFpbF9z aGFyZWRfcG9vbEA= DKIM-Signature: v=1; a=rsa-sha256; d=smtp.com; s=smtpcomcustomers; c=relaxed/simple; q=dns/txt; i=@smtp.com; t=1434118492; h=From:Subject:To:Date:MIME-Version:Content-Type; bh=u308HHnD8wg92HQZ/ySeU8BBBA/F6s7nc1yjTS5NtmM=; b=kL9njLU6/SN2zZoSZ1Yh6gwsjRGbHiO1v9pjAbppgGdvc7hNalBo25xVOuf55D75 15Vop1I51s2kBEEpVN+Dz3LayNjTnBQK+EFTgtGt6LYxyZ83Gkesf4eOpiCvGrTe mV8Qq/AIM6he11WoqWXJr+Es7aW1k3ii/kaTuJ+svf4=; Received: from [50.19.72.119] ([50.19.72.119:52372] helo=sentbyzeus.com) by rs-ord-mta01-1.smtp.com (envelope-from ) (ecelerity 3.6.7.46655 r(Core:3.6.7.0)) with ESMTPA id 5D/4B-18083-C59EA755; Fri, 12 Jun 2015 14:14:52 +0000 Received: from sentbyzeus.com (localhost [127.0.0.1]) by sentbyzeus.com (Postfix) with ESMTP id 3F2585C19 for ; Wed, 10 Jun 2015 22:56:09 +0000 (UTC) Message-ID: <5D.4B.18083.C59EA755@rs-ord-mta01-1.smtp.com> DKIM-Signature: v=1; a=rsa-sha1; c=simple; d=offandawaymail.com; h= content-type:mime-version:to:from:subject:date; s=postfix; bh=L1 Jgq5k8spayT4rKHRa2+9auZNs=; b=hIAAgYvvFCJWmS7b/8tw9vLv6B/TDrjwPM oz674MCr7r0V90JESdQ4ZEXw2zBETfHbqH//9t1/MFJVu/2ahAyHezvXY4rQiqST eCB8SvhpipOnrzs5+S5X4JzBElDtmzxWRyK39Y5Qie+x6yzX2VcDUgEBqlvtk+e0 8FsL1K3+0= MIME-Version: 1.0 To: freebsd-questions@freebsd.org From: Ana Berjuega Subject: Wyoming Students and Parents Education Resources Date: Wed, 10 Jun 2015 22:56:36 +0000 X-SMTPCOM-Tracking-Number: 1bf38ffc-38ae-4847-a5e9-98a4de763301 X-SMTPCOM-Sender-ID: 5009774 Feedback-ID: 5009774:SMTPCOM Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 14:34:59 -0000 CkhpIHRoZXJlLAoKSSB3YXMgaG9waW5nIHlvdSB3b3VsZCBiZSBhYmxlIHRvIHBvaW50IG1lIGlu IHRoZSByaWdodCBkaXJlY3Rpb24sIEkgaGF2ZSBiZWVuIHJlc2VhcmNoaW5nIG9uIHlvdXIgc2l0 ZSAgaHR0cDovL3d3dy5wbC5mcmVlYnNkLm9yZy9nYWxsZXJ5L25wZ2FsbGVyeS5odG1sIGZvciBj b2xsZWdlIGVkdWNhdGlvbiBhbmQgcmVsYXRlZCByZXNvdXJjZXMgdGhhdCBhcmUgYXZhaWxhYmxl IGZvciBzdHVkZW50cyBhbmQgaGFkIGEgZmV3IHF1ZXN0aW9ucy4KCkFyZSB5b3UgdGhlIHJpZ2h0 IHBlcnNvbiB0byBzcGVhayB3aXRoIG9yIGlzIHRoZXJlIHNvbWVvbmUgZWxzZSB5b3Ugd291bGQg cmVjb21tZW5kPwoKVGhhbmsgeW91LAoKQW5hIEJlcmp1ZWdh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 15:35:28 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 6A95FB26 for ; Fri, 12 Jun 2015 15:35:28 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from smtp.infracaninophile.co.uk (smtp.infracaninophile.co.uk [IPv6:2001:8b0:151:1:3cd3:cd67:fafa:3d78]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.infracaninophile.co.uk", Issuer "infracaninophile.co.uk" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id EAD5AD0B for ; Fri, 12 Jun 2015 15:35:27 +0000 (UTC) (envelope-from matthew@FreeBSD.org) Received: from liminal.local ([137.122.64.56]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.15.1/8.15.1) with ESMTPSA id t5CFZDRd012830 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for ; Fri, 12 Jun 2015 16:35:16 +0100 (BST) (envelope-from matthew@FreeBSD.org) Authentication-Results: smtp.infracaninophile.co.uk; dmarc=none header.from=FreeBSD.org DKIM-Filter: OpenDKIM Filter v2.9.2 smtp.infracaninophile.co.uk t5CFZDRd012830 Authentication-Results: smtp.infracaninophile.co.uk/t5CFZDRd012830; dkim=none reason="no signature"; dkim-adsp=none; dkim-atps=neutral X-Authentication-Warning: lucid-nonsense.infracaninophile.co.uk: Host [137.122.64.56] claimed to be liminal.local Message-ID: <557AFC28.9040209@FreeBSD.org> Date: Fri, 12 Jun 2015 11:35:04 -0400 From: Matthew Seaman User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Wyoming Students and Parents Education Resources References: <5D.4B.18083.C59EA755@rs-ord-mta01-1.smtp.com> In-Reply-To: <5D.4B.18083.C59EA755@rs-ord-mta01-1.smtp.com> Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="9QTd8RmHI8rvDLQ3cMfRms6DEqo34dsDe" X-Virus-Scanned: clamav-milter 0.98.7 at lucid-nonsense.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.8 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.1 X-Spam-Checker-Version: SpamAssassin 3.4.1 (2015-04-28) on lucid-nonsense.infracaninophile.co.uk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 15:35:28 -0000 This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --9QTd8RmHI8rvDLQ3cMfRms6DEqo34dsDe Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable On 10/06/2015 18:56, Ana Berjuega wrote: > I was hoping you would be able to point me in the right direction, I > have been researching on your site > http://www.pl.freebsd.org/gallery/npgallery.html for college > education and related resources that are available for students and > had a few questions. >=20 > Are you the right person to speak with or is there someone else you > would recommend? Hmmm... I think you're looking at an old page on the Polish localized version of the FreeBSD site, which might possibly not be completely synched up with the primary site yet. Anyhow, you should contact the FreeBSD Foundation: https://www.freebsdfoundation.org/ because they are literally in the process of rolling out a range of teaching resources including material suitable for middle/high-school level students upto undergraduate level. There will be material available at http://teachbsd.org/ but it's still in quite an early stage of development right now. Cheers, Matthew --9QTd8RmHI8rvDLQ3cMfRms6DEqo34dsDe Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.20 (Darwin) iQJ8BAEBCgBmBQJVevwvXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ2NTNBNjhCOTEzQTRFNkNGM0UxRTEzMjZC QjIzQUY1MThFMUE0MDEzAAoJELsjr1GOGkATCX8P/2pzF0tkx4OZQYtXRaXXsq7B OWq3mEAXVlENRRsv4WqhL2yWwrDHDTb+7E+1BlO5pOzDxBmQhkQ5vGSsmYDWtQ3u kko5v8w6G29bSjBMQlGfd1YnCv7kykAFSv7TWCnN+nsttuwJESVxmj1t6e4JzjFX PhbH7ZFa+Ep9nKEycCHMIOHuCtTCBS0HsYVUKpLpgPJNsdHETCg0U2nhcZtUaJrI aqcg9+XqUq/uOkgE5OLquScomlibxMjMpOi8fLNP/oicVUyUhBQCMedQKMHZHHaf I1mJtptUue9R5rDHfxmwiD2nE/cD1BDM3r+rGj+5ey6AnIb4tuTxlCtEVftklMzs noGqW2UlAbbF5fdQvXvRQx8NRwXlhMdg4zoVJmfELB+AsC86/ui5/ttYJ9umPL33 +NnmRUkKccBi4iBSlx5HTrh4nZgWdD+12FOZVouQnZZYzw684JkOTN8zYUMLaCZ7 JjDzMgHbFZBdNBXKZ+d3tDwYvexs3kwGJdPN1K7AM8XzRFxUXJ3n9ZEOdNe1Gfl5 YgZQcdFGItXUoyJ7/GVZPQykGyAFgVLkwCnuJJHow7aSQCuB8S0waOGLkGjjjRvt xmOuzwNI4JufKxfuasrNmJp9M+U34L2A37uAGKjdkaSE1hd4/YTDiXx68htRT0z+ hAdV3vxrDLDSTYahqD+w =K5nu -----END PGP SIGNATURE----- --9QTd8RmHI8rvDLQ3cMfRms6DEqo34dsDe-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 12 23:54:31 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B0E93DFD for ; Fri, 12 Jun 2015 23:54:31 +0000 (UTC) (envelope-from us.navy@outlook.com) Received: from BAY004-OMC4S16.hotmail.com (bay004-omc4s16.hotmail.com [65.54.190.218]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (Client CN "*.outlook.com", Issuer "MSIT Machine Auth CA 2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 9D61D1BE for ; Fri, 12 Jun 2015 23:54:31 +0000 (UTC) (envelope-from us.navy@outlook.com) Received: from BAY182-W89 ([65.54.190.200]) by BAY004-OMC4S16.hotmail.com over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22751); Fri, 12 Jun 2015 16:53:25 -0700 X-TMN: [VNQeF462Pvmo3VqxOUe1Dvk+Hi6zzDo3yCXImbuxROA=] X-Originating-Email: [us.navy@outlook.com] Message-ID: From: "Lt. Commander" To: "freebsd-questions@freebsd.org" CC: "sageame@sageweb.net" Subject: Script question Date: Fri, 12 Jun 2015 18:53:25 -0500 Importance: Normal Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 12 Jun 2015 23:53:26.0018 (UTC) FILETIME=[F939DE20:01D0A56A] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Jun 2015 23:54:31 -0000 Am running fbsd-9.3 and sendmail-8.15 plus spamassassin.=0A= =0A= I would like to be able to scan the daily maillog with a script at midnight= to extract a list by selecting spam recognized and contained using the con= stant "score=3D(greater than x) and from that a list of just the IPs which = will be placed in a spam file as part of a spam system here. Am tired of so= me getting past spamass even though it exceeds a reasonable tag level.=0A= =0A= I do know how to extract just the IP from a line in the log=2C but not sure= what the syntax should be to first ID the "score=3D Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 41DE813E for ; Sat, 13 Jun 2015 00:18:54 +0000 (UTC) (envelope-from olivier2553@gmail.com) Received: from mail-ig0-x235.google.com (mail-ig0-x235.google.com [IPv6:2607:f8b0:4001:c05::235]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 0B77C863 for ; Sat, 13 Jun 2015 00:18:54 +0000 (UTC) (envelope-from olivier2553@gmail.com) Received: by igbhj9 with SMTP id hj9so21702799igb.1 for ; Fri, 12 Jun 2015 17:18:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date:message-id:subject :from:to:cc:content-type:content-transfer-encoding; bh=jNW9RKakJXRkI0pdSIIIxuW/UV9UScC+D2EzD+0XJp0=; b=T5vx8rvUemrh1lrmbkebdKW0rDzL3HSMftOozcOEHTvqOX/vCoo5imzsJgV1saiH/V ND5Uj3B0nYZtGwdQaQ86XjrHQYZsRL44yfhKKRYxPuEyZM9wjc8ZBlh3qm6UPgQohAO2 CcN8SJ96RUfJYI7QwlAp561JhuLh7oq4DxvUupR5I+5gdR9Ifwax2q+L8FWFZq74ZRJK BHbHZEHGrPiv1uhq4wvEGrxF+34ciwwDFs0JUmlA6mTjPUzkTbA7t+gxix0LboouHnWT +Zr2kWgijyrC+saDtufiTKVK5vW4MFpmQLPvNlr/FemnuWAgTyun8dHSrQSOkOdyVmcQ Rdkw== MIME-Version: 1.0 X-Received: by 10.50.117.106 with SMTP id kd10mr7558161igb.24.1434154733304; Fri, 12 Jun 2015 17:18:53 -0700 (PDT) Sender: olivier2553@gmail.com Received: by 10.107.47.66 with HTTP; Fri, 12 Jun 2015 17:18:53 -0700 (PDT) In-Reply-To: References: Date: Sat, 13 Jun 2015 07:18:53 +0700 X-Google-Sender-Auth: MJ9kJI3sMwQg8dqWpdcfWzf3TIY Message-ID: Subject: Re: Script question From: Olivier Nicole To: "Lt. Commander" Cc: "freebsd-questions@freebsd.org" , "sageame@sageweb.net" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 00:18:54 -0000 Jason, > I would like to be able to scan the daily maillog with a script at midnig= ht to extract a list by selecting spam recognized and contained using the c= onstant "score=3D(greater than x) and from that a list of just the IPs whic= h will be placed in a spam file as part of a spam system here. Am tired of = some getting past spamass even though it exceeds a reasonable tag level. > > I do know how to extract just the IP from a line in the log, but not sure= what the syntax should be to first ID the "score=3D > I hope this has been presented clear enough to gather some help on this t= ask. > > Thanks, > Jason > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 00:36:42 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id CE1902DE for ; Sat, 13 Jun 2015 00:36:42 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from mx02.qsc.de (mx02.qsc.de [213.148.130.14]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 908F3C88 for ; Sat, 13 Jun 2015 00:36:42 +0000 (UTC) (envelope-from freebsd@edvax.de) Received: from r56.edvax.de (port-92-195-111-193.dynamic.qsc.de [92.195.111.193]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx02.qsc.de (Postfix) with ESMTPS id 8E80B276E6; Sat, 13 Jun 2015 02:36:31 +0200 (CEST) Received: from r56.edvax.de (localhost [127.0.0.1]) by r56.edvax.de (8.14.5/8.14.5) with SMTP id t5D0aVF9002407; Sat, 13 Jun 2015 02:36:31 +0200 (CEST) (envelope-from freebsd@edvax.de) Date: Sat, 13 Jun 2015 02:36:31 +0200 From: Polytropon To: "Lt. Commander" Cc: "freebsd-questions@freebsd.org" , "sageame@sageweb.net" Subject: Re: Script question Message-Id: <20150613023631.db821f0c.freebsd@edvax.de> In-Reply-To: References: Reply-To: Polytropon Organization: EDVAX X-Mailer: Sylpheed 3.1.1 (GTK+ 2.24.5; i386-portbld-freebsd8.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 00:36:42 -0000 On Fri, 12 Jun 2015 18:53:25 -0500, Lt. Commander wrote: > Am running fbsd-9.3 and sendmail-8.15 plus spamassassin. > > I would like to be able to scan the daily maillog with a script > at midnight to extract a list by selecting spam recognized and > contained using the constant "score=(greater than x) and from > that a list of just the IPs which will be placed in a spam file > as part of a spam system here. Am tired of some getting past > spamass even though it exceeds a reasonable tag level. What you're describing here sounds like the typical functionality of a spam filter. None of the present solutions fits your needs? > I do know how to extract just the IP from a line in the log, > but not sure what the syntax should be to first ID the "score= in a simple sh shell script. If you can provide an anonymized example from such a log line, you might get a direct suggestion. At this point, if you have to use sh tools (sh, sed, awk, cut, grep et al.), you can probably do this the easiest using awk, with a pattern that matches the spam score criteria, and then trim the line down to the information (here: IP) you need. Surely you can also do this with a "grep | sed | cut pipeline", but awk can probably do this alone. Anyway, also consider perl which is "the typical tool" for the task of "log distillation". :-) > I hope this has been presented clear enough to gather some help on this task. It is. An example of your input and desired output would have been nice. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 00:40:11 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 8E0FC3B3 for ; Sat, 13 Jun 2015 00:40:11 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: from mail-ig0-x232.google.com (mail-ig0-x232.google.com [IPv6:2607:f8b0:4001:c05::232]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 5522FCCF for ; Sat, 13 Jun 2015 00:40:11 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: by igbzc4 with SMTP id zc4so21570240igb.0 for ; Fri, 12 Jun 2015 17:40:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=JxDUofVX+hO1tPMPPXJRV64dbFWj7CgFRNvLcWeTzgw=; b=KPXOnLeW5EagyCqyVod9/RkgE+xYwyQ6FuNUYCklbbwFRZEzknRl81DVHL/i3wfSGW IcbDvhb6f6jnmzflBN13ljE+ICAOktq7w+4K4a3E1MjGH8LvOe7j4U2p7DmqGw3pgSIf CzBFB/a4IjLqtPnNlKeeU+TayH2aoAvc+2Jf289Jz9I020g22NVITzH+JIzQsjlTWKYG faNatL9NFu7gAZzpvwSSRjGF6++s40Vh9qEddKknjwhINmXD3ilKywc0RzbduZoNYgVL L/L5ELXQi6YpnlVZZkz41cPrS1Bnd5b82xU/qe1ceU+gfTPzFxbihVvzeM8as3J2SaAI ko0A== X-Received: by 10.107.133.9 with SMTP id h9mr21274534iod.47.1434156010734; Fri, 12 Jun 2015 17:40:10 -0700 (PDT) Received: from localhost.localdomain ([50.243.6.59]) by mx.google.com with ESMTPSA id r4sm2300533igh.9.2015.06.12.17.40.09 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 12 Jun 2015 17:40:10 -0700 (PDT) Message-ID: <557B7BCD.2050908@gmail.com> Date: Fri, 12 Jun 2015 18:39:41 -0600 From: jd1008 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Script question References: In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 00:40:11 -0000 On 06/12/2015 05:53 PM, Lt. Commander wrote: > Am running fbsd-9.3 and sendmail-8.15 plus spamassassin. > > I would like to be able to scan the daily maillog with a script at midnight to extract a list by selecting spam recognized and contained using the constant "score=(greater than x) and from that a list of just the IPs which will be placed in a spam file as part of a spam system here. Am tired of some getting past spamass even though it exceeds a reasonable tag level. > > I do know how to extract just the IP from a line in the log, but not sure what the syntax should be to first ID the "score= > I hope this has been presented clear enough to gather some help on this task. > > Thanks, > Jason Copy and paste a sample email header in your reply to this list. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 00:31:05 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 11AF9267 for ; Sat, 13 Jun 2015 00:31:05 +0000 (UTC) (envelope-from listmgr@antennex.com) Received: from BAY004-OMC4S4.hotmail.com (bay004-omc4s4.hotmail.com [65.54.190.206]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (Client CN "*.outlook.com", Issuer "MSIT Machine Auth CA 2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id EF3D5BB7 for ; Sat, 13 Jun 2015 00:31:04 +0000 (UTC) (envelope-from listmgr@antennex.com) Received: from BAY404-EAS263 ([65.54.190.201]) by BAY004-OMC4S4.hotmail.com over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22751); Fri, 12 Jun 2015 17:29:59 -0700 X-TMN: [nVDUBdT89XHGJaVWtKMIRotF0wuOn7BSC8Gc4zxuvyg=] X-Originating-Email: [listmgr@antennex.com] Message-ID: From: "Lt. Commander" To: "'Olivier Nicole'" CC: References: In-Reply-To: Subject: RE: Script question Date: Fri, 12 Jun 2015 19:29:56 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Outlook 15.0 thread-index: AQABAgME0X1Dm5rl1ITbGRHvuqm5ZwDmqqb4AMy6ez2hOz/2YA== Content-Language: en-us X-OriginalArrivalTime: 13 Jun 2015 00:29:59.0146 (UTC) FILETIME=[146EA4A0:01D0A570] X-Mailman-Approved-At: Sat, 13 Jun 2015 01:06:14 +0000 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 00:31:05 -0000 -----Original Message----- From: olivier2553@gmail.com [mailto:olivier2553@gmail.com] On Behalf Of = Olivier Nicole Sent: Friday, June 12, 2015 7:19 PM To: Lt. Commander Cc: freebsd-questions@freebsd.org Subject: Re: Script question Jason, > I would like to be able to scan the daily maillog with a script at = midnight to extract a list by selecting spam recognized and contained = using the constant "score=3D(greater than x) and from that a list of = just the IPs which will be placed in a spam file as part of a spam = system here. Am tired of some getting past spamass even though it = exceeds a reasonable tag level. > > I do know how to extract just the IP from a line in the log, but not = sure what the syntax should be to first ID the "score=3D > I hope this has been presented clear enough to gather some help on = this task. > > Thanks, > Jason Oliver: This is a typical line in the log. You see it has the info needed: -------------------------------------------------------------------------= ---------------------- un 12 08:56:42 myhost.com milter-spamc[58732]: 01937 t5CDueuM006830: = spam=3DYES score=3D110.90 required=3D6.00 client_addr=3D117.62.50.137 = client_name=3D[117.62.50.137] subject=3D'Re: I won't tell this secrect = to anyone else...' mail=3D rcpts=3D -------------------------------------------------------------------------= ---------------------- Thanks, Jason From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 01:17:22 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 4FD63A89 for ; Sat, 13 Jun 2015 01:17:22 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: from mail-ig0-x22a.google.com (mail-ig0-x22a.google.com [IPv6:2607:f8b0:4001:c05::22a]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 16A30782 for ; Sat, 13 Jun 2015 01:17:22 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: by igbsb11 with SMTP id sb11so20534630igb.0 for ; Fri, 12 Jun 2015 18:17:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=AHU+C89ah2BtRvdtYox2bb4BwFGAehbmMBr5FoIYwKE=; b=HjuZpFJgeERptur/pTguS0cEQwoSuu+qpBcT/M/sAp3EgIyRbJ0LhejT4xH+0NdaEk IJ4TY+9p9eXTdoWDDtnIuPEeRBFzPUvH7V2MD7ywbEU/KKj2KLxe0HiHuruLPNXMhZPa zQaCbTssno7aeDUPzBfOgMc+NjSvesNypwM8UsgzZIohbLSY5+pboP8zECRGPUOjnxkm OphpWFwbi3TsjvVhXXizU/qWRl44qahGLIcQXZFpRa4CtKmawuVlmgKxd+nR8mc7qP7D s3CBMOBlL3nzZKJnfAygHcQOlWLy2ITUcTA9sBuKF9RlqNLxpgke3+9yifPI0AeRWYxP s5mQ== X-Received: by 10.50.117.106 with SMTP id kd10mr7728802igb.24.1434158241513; Fri, 12 Jun 2015 18:17:21 -0700 (PDT) Received: from localhost.localdomain ([50.243.6.59]) by mx.google.com with ESMTPSA id vk8sm2364691igb.4.2015.06.12.18.17.20 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 12 Jun 2015 18:17:20 -0700 (PDT) Message-ID: <557B8484.9060405@gmail.com> Date: Fri, 12 Jun 2015 19:16:52 -0600 From: jd1008 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Script question References: In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 01:17:22 -0000 On 06/12/2015 06:29 PM, Lt. Commander wrote: > -----Original Message----- > From: olivier2553@gmail.com [mailto:olivier2553@gmail.com] On Behalf Of Olivier Nicole > Sent: Friday, June 12, 2015 7:19 PM > To: Lt. Commander > Cc: freebsd-questions@freebsd.org > Subject: Re: Script question > > Jason, > >> I would like to be able to scan the daily maillog with a script at midnight to extract a list by selecting spam recognized and contained using the constant "score=(greater than x) and from that a list of just the IPs which will be placed in a spam file as part of a spam system here. Am tired of some getting past spamass even though it exceeds a reasonable tag level. >> >> I do know how to extract just the IP from a line in the log, but not sure what the syntax should be to first ID the "score= What would be the typical lines from the log? > > I;d use Perl rather than sh. > > Olivier > > >> I hope this has been presented clear enough to gather some help on this task. >> >> Thanks, >> Jason > Oliver: > > This is a typical line in the log. You see it has the info needed: > > ----------------------------------------------------------------------------------------------- > un 12 08:56:42 myhost.com milter-spamc[58732]: 01937 t5CDueuM006830: spam=YES score=110.90 required=6.00 client_addr=117.62.50.137 client_name=[117.62.50.137] subject='Re: I won't tell this secrect to anyone else...' mail= rcpts= > ----------------------------------------------------------------------------------------------- > > Thanks, > Jason > Hi Jason, Does the log consist of one liners as you show above? In otherwords, is each one line entry for one message? Are there more than 1 line per message in the log? From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 01:51:29 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 65992E6A for ; Sat, 13 Jun 2015 01:51:29 +0000 (UTC) (envelope-from fortezza@mechanicalism.net) Received: from mail.mechanicalism.net (alderaan.mechanicalism.net [63.143.32.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 3EFD6F30 for ; Sat, 13 Jun 2015 01:51:28 +0000 (UTC) (envelope-from fortezza@mechanicalism.net) Received: from alderaan.mechanicalism.net (localhost [127.0.0.1]) by mail.mechanicalism.net (Postfix) with ESMTP id C937510076 for ; Fri, 12 Jun 2015 20:43:57 -0500 (CDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d= mechanicalism.net; h=user-agent:in-reply-to:content-disposition :content-type:content-type:mime-version:references:message-id :subject:subject:from:from:date:date:received:received; s=dkim; t=1434159836; x=1435974237; bh=rFsea8ST63uxwMgAA0zQ1NAf6GgV6yab RYRGwjvBu6s=; b=ljLeYappTwEWeuxVzCufOk/zu5kxcwAlfUx5LF85NN5K9KpP JJG6SCjBonUw8tocbXEErLFmxi+8L0HNEFqS/L3iFqaCEEcvO7Gx9eDiwDt8mxXG LhFXUgIX5HpqfJ6AVDW08m1mi9ogVvGGS1pYgfscYi38sEzrV5Y+vpwgusI= X-Virus-Scanned: amavisd-new at mechanicalism.net Received: from mail.mechanicalism.net ([127.0.0.1]) by alderaan.mechanicalism.net (alderaan.mechanicalism.net [127.0.0.1]) (amavisd-new, port 10026) with LMTP id nPlXk643iXY6 for ; Fri, 12 Jun 2015 20:43:56 -0500 (CDT) Received: by mail.mechanicalism.net (Postfix, from userid 1001) id E92CE1006C; Fri, 12 Jun 2015 20:43:56 -0500 (CDT) Date: Fri, 12 Jun 2015 20:43:56 -0500 From: Jason Fortezzo To: freebsd-questions@freebsd.org Subject: Re: Softlayer VPS: Loading FreeBSD Message-ID: <20150613014356.GA86762@alderaan.mechanicalism.net> References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> <557A241D.5090307@gmail.com> <3D2FF45C-9C83-4504-8051-4A409E06F8BE@hub.org> <557A2B5F.4010603@buildingonline.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <557A2B5F.4010603@buildingonline.com> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 01:51:29 -0000 On Thu, Jun 11, 2015 at 06:44:15PM -0600, Dan Busarow wrote: > Checkout rootbsd.net > > I have 10 VPS and 1 dedicated server there. Excellent BSD support as > you might gather from the name. I've had a different experience with rootbsd.net. I've had a VPS for 2 years with them and the service has just been "OK". - They have a local SVN mirror but it's either out of date or broken - They don't keep their VNC proxy or backup FreeBSD server patched. - No local NTP servers. - I was recently moved to a new Xen VPS which has made PF unusable. I've since moved to a new provider running directly on bare metal for just a little more $$$ a month. -- Jason Fortezzo fortezza@mechanicalism.net From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 01:53:57 2015 Return-Path: Delivered-To: questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id EFF42F02 for ; Sat, 13 Jun 2015 01:53:57 +0000 (UTC) (envelope-from hartzell@alerce.com) Received: from griffon.alerce.com (griffon.alerce.com [206.125.171.162]) (using TLSv1 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (Client CN "griffon.alerce.com", Issuer "griffon.alerce.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id D79F0FB3 for ; Sat, 13 Jun 2015 01:53:57 +0000 (UTC) (envelope-from hartzell@alerce.com) Received: from griffon.alerce.com (localhost [127.0.0.1]) by griffon.alerce.com (Postfix) with ESMTP id 314B42842D for ; Fri, 12 Jun 2015 18:47:57 -0700 (PDT) Received: from postfix.alerce.com (75-149-38-78-SFBA.hfc.comcastbusiness.net [75.149.38.78]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by griffon.alerce.com (Postfix) with ESMTPSA id F01EC2842C for ; Fri, 12 Jun 2015 18:47:56 -0700 (PDT) Received: by postfix.alerce.com (Postfix, from userid 503) id DD0FB581B618; Fri, 12 Jun 2015 18:47:57 -0700 (PDT) From: George Hartzell MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <21883.35789.822027.413019@alacrity.local> Date: Fri, 12 Jun 2015 18:47:57 -0700 To: FreeBSD Questions Subject: FreeBSD 10.1, Mac Pro 2008, EFI, hangs at boot w/ "Start @0xfff...." X-Mailer: VM 8.2.0b under 24.5.1 (x86_64-apple-darwin14.1.0) Reply-To: hartzell@alerce.com X-Virus-Scanned: ClamAV using ClamSMTP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 01:53:58 -0000 I have a 2008 Mac Pro (NOT a MacBook) that's been happily running FreeBSD for years via MBR partitioned disks. When the Mac sees the MBR partition it kicks in a bunch of bios emulation, which lets freebsd run. I've recently been inspired to try the EFI booting stuff. It has the attraction of enabling the two extra SATA ports on the motherboard (or more accurately, not disabling them as the BIOS emulation appears to...). I've tried both a USB stick of 10.1 and an SSD with -CURRENT. Both use EFI booting and work on my Minnowboard. Booting either way exhibits the same symptom. /boot/loader.efi runskoads the kernel and stuff but when it boots it prints Booting... Start @0xffffffff802e7000 ... _ (that's the address when booted from the SSD, the address for the 10.1 USB stick is 0xffffffff802df060) and then hangs. Thinking that maybe the console was pointing off somewhere, I tried setting it at the forth/OK prompt, it was already set to "efi", which seems like the best choice. It'd be nice to get it booting via EFI. Any suggestions for what to try next? Thanks, g. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 08:52:03 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 055D2455 for ; Sat, 13 Jun 2015 08:52:03 +0000 (UTC) (envelope-from iamnickhil@live.com) Received: from DUB004-OMC4S33.hotmail.com (dub004-omc4s33.hotmail.com [157.55.2.108]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (Client CN "*.outlook.com", Issuer "MSIT Machine Auth CA 2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 7B3B5C48 for ; Sat, 13 Jun 2015 08:52:02 +0000 (UTC) (envelope-from iamnickhil@live.com) Received: from DUB131-W16 ([157.55.2.73]) by DUB004-OMC4S33.hotmail.com over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22751); Sat, 13 Jun 2015 01:50:53 -0700 X-TMN: [mXqqsBH6zeqNDv4G6I88vbgb6NfSkSnH] X-Originating-Email: [iamnickhil@live.com] Message-ID: From: Nikhil Chavan To: "freebsd-questions@freebsd.org" Subject: AHCI and Gigabyte GA-G31M-ES2L Date: Sat, 13 Jun 2015 14:20:53 +0530 Importance: High MIME-Version: 1.0 X-OriginalArrivalTime: 13 Jun 2015 08:50:53.0530 (UTC) FILETIME=[0E3DB3A0:01D0A5B6] Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 08:52:03 -0000 Amigos=2C I owns a GA-G31M-ES2L & want to upgrade my BIOS as I don't have AHCI Option= s in my BIOS. If you have update patch / files than kindly consider this as= a request & forward me. If you guys have any other options exceept this th= an also let me know. Regards=2CNicKhil = From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 12:12:28 2015 Return-Path: Delivered-To: questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C05DCACA for ; Sat, 13 Jun 2015 12:12:28 +0000 (UTC) (envelope-from will.lee@connecmax.com) Received: from mail-pa0-f53.google.com (mail-pa0-f53.google.com [209.85.220.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 93FF5EA9 for ; Sat, 13 Jun 2015 12:12:27 +0000 (UTC) (envelope-from will.lee@connecmax.com) Received: by pacyx8 with SMTP id yx8so37079863pac.2 for ; Sat, 13 Jun 2015 05:12:26 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:date:from:to:subject:disposition-notification-to :mime-version:message-id:content-type; bh=09+tqCQnmZsoi+w5y988uWoUggmngJn0q3G4w8jzMUE=; b=Z8LccgQQ60UcIqPiQZEUhtI8He/kcJBEUPD1PUUXf4ZDGdNT/X/gw+zaphrhI9yasC E6taeXyF51G0gOJ8yGX/s1KJL4ic8jyN2t/qjsiLmnpfLYykOJAcZIu31Uo7a4nqINqo Bl8OSgNA0PJOXAIZB9lrDWt7LHxa336+vKy9S895rjXhJGoJUEavEckiYTFU24sVh8sA Eym5j9kIwMXx2iQgIX7IRyScKr7T59uxIFoQvLXspn7n/cQJplrwP+KTEDjejfpx0Ykz bZofm7+WR/DU21yqpvKRKZ19ey4mY6hSbkakzqE9PBTAKTQo3vrS4eeahRHNuE262Fx5 0LZg== X-Gm-Message-State: ALoCoQmIDQiHd3Qi0fLk18PC6ZqKI98tXYE2NsxGs0y/lsFnVDOKXP6gR3Lk4C7zCHPjonn7cP44 X-Received: by 10.66.147.39 with SMTP id th7mr31334717pab.2.1434197546824; Sat, 13 Jun 2015 05:12:26 -0700 (PDT) Received: from WIN ([183.15.173.46]) by mx.google.com with ESMTPSA id k3sm6462740pde.18.2015.06.13.05.12.23 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sat, 13 Jun 2015 05:12:26 -0700 (PDT) Date: Sat, 13 Jun 2015 19:57:40 +0800 From: "will.lee@connecmax.com" To: questions Subject: SCSI Cable, do you have X-Priority: 3 X-Has-Attach: no X-Mailer: Foxmail 7, 2, 6, 42[cn] Mime-Version: 1.0 Message-ID: <2015061315051406572437@connecmax.com> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 12:12:29 -0000 RGVhciBGcmllbmQsDQogDQpXZSBwcm9kdWNlIGFsbCBraW5kcyBvZiBTQ1NJIGNhYmxlIHdpdGgg Z29vZCBwZXJmb3JtYW5jZS4gQ2VydGlmaWNhdGVzIG9mIFNHUyBoYXZlICBhY2hpZXZlZC4gV2Ug aGF2ZSBvd24gbG9naXN0aWNzIGNvbXBhbnkgdG8gc2F2ZSB5b3VyIGNvc3QgLiBBbmQgT0VNIGlz IHN1cHBvcnRlZC4NCiANCkFsbCB0aGUgV2lyZSBpcyBCYXJlIENvcHBlci4gSGVyZSBhcmUgdGhl IFNDU0kgY2FibGVzIHdlIHByb2R1Y2UsIGlmIHRoZSBpdGVtcyB5b3UgaW50ZXJlc3RlZCwgcGxz IGlucXVpcnkgdXMuDQogU0NTSSBMZWFkIFVsdHJhIDY4IG1hbGUgdG8gVWx0cmEgNjggbWFsZSAo VkhEQ0kpIFNDU0kgY2FibGUNCiBTQ1NJIENhYmxlIEhENjhNIHRvIEhENjhNICBjYWJsZQ0KIFND U0ktMyBDQUJMRSBNQUxFIFRPIE1BTEUgSEQgNjggUElOUyBjYWJsZQ0KIFNDU0ktNSAoVkhEQ0kp IDAuOG1tIHRvIFNDU0ktMyAoSFBEQjY4KSA2OC1QaW4gTWFsZS9NYWxlIENhYmxlDQogU0NTSSBM ZWFkIDUwIENlbnRyb25pYyBtYWxlIHRvIDUwIENlbnRyb25pYyBNYWxlIFNDU0kgY2FibGUNCiBT Q1NJIExlYWQgSGFsZiBQaXRjaCA1MCBtYWxlIHRvIDUwIENlbnRyb25pYyBtYWxlIGNhYmxlDQog U0NTSSBIUERCNTAgTWFsZSB0byBDZW41MCBNYWxlIEV4dGVybmFsIERyaXZlIENhYmxlDQogU0NT SSBIUERCNTAgTWFsZSB0byBWSERDSTY4IE1hbGUgQ2FibGUNCiANCldhaXRpbmcgZm9yIHlvdXIg aW5xdWlyeS4NCiANCkJlc3QgcmVnYXJkcyENCg0KDQpXaWxsIExlZQ0KDQpDb25uZWNtYXggR3Jv dXAgIENvLixMdGQNClNoZW56aGVuIFByaW1lIFRlY2hub2xvZ3kgQ28uLEx0ZA0KVEVMOiA4NiAx ODMgMDY2NiA3NDY5ICAgU2t5cGU6Y29ubmVjbWF4NyAgIA0KV0VCOmh0dHA6Ly93d3cuZ2xvYmFs c291cmNlcy5jb20vc3pjb25uZWNtYXguY28gICAgICAgICAgDQpBZGQ6U291dGgsIDNGTCwgQmxv Y2sgRSwgRGFrYW4gVGVjaG5vbG9neSBQYXJrLCBEYWthbiBWaWxsYWdlLCAgIFhpbGkgVG93biwg TmFuc2hhbiBEaXN0LCBTaGVuemhlbiwgR0QsIENoaW5hDQo= From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 12:59:28 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 010A434D for ; Sat, 13 Jun 2015 12:59:27 +0000 (UTC) (envelope-from listmgr@antennex.com) Received: from BAY004-OMC4S22.hotmail.com (bay004-omc4s22.hotmail.com [65.54.190.224]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (Client CN "*.outlook.com", Issuer "MSIT Machine Auth CA 2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id E100EA16 for ; Sat, 13 Jun 2015 12:59:27 +0000 (UTC) (envelope-from listmgr@antennex.com) Received: from BAY182-W64 ([65.54.190.200]) by BAY004-OMC4S22.hotmail.com over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22751); Sat, 13 Jun 2015 05:58:21 -0700 X-TMN: [TXpLeANEov6whZ1i1ARECGNwa+TCeiHYuFmGBj+7cyM=] X-Originating-Email: [listmgr@antennex.com] Message-ID: From: "Lt. Commander" To: "freebsd-questions@freebsd.org" Subject: RE: Script question Date: Sat, 13 Jun 2015 07:58:21 -0500 Importance: Normal In-Reply-To: <557B8484.9060405@gmail.com> References: , , , <557B8484.9060405@gmail.com> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 13 Jun 2015 12:58:21.0812 (UTC) FILETIME=[A081BB40:01D0A5D8] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 12:59:28 -0000 > Date: Fri=2C 12 Jun 2015 19:16:52 -0600=0A= > From: jd1008@gmail.com=0A= > To: freebsd-questions@freebsd.org=0A= > Subject: Re: Script question=0A= =0A= Here is a short shell script: =0A= =0A= #!/bin/sh =0A= =0A= while read line=3B do =0A= score=3D`echo $line | grep ' score=3D.. '` =0A= scoreValue=3D`echo $score | sed -e 's/score=3D//' -e 's/ *//'` =0A= address=3D`echo $line | grep 'client_addr=3D[0-9]*\.[0-9]*\.[0-9]*.[0-9]* '= ` =0A= IP=3D`echo $address | sed 's/client_addr=3D//'` =0A= =0A= if [ $scoreValue -ge 12 ]=3B then =0A= =A0=A0=A0=A0=A0=A0=A0 echo $score =0A= =A0=A0=A0=A0=A0=A0=A0 echo $IP =0A= =A0=A0=A0=A0=A0=A0=A0 echo =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D =0A= fi =0A= done < your-log-file-name> some-file-to-use-to-construct-the-spamassasin fi= lter=A0=0A= =0A= ----------------------------------------=0A= > Date: Fri=2C 12 Jun 2015 19:16:52 -0600=0A= > From: jd1008@gmail.com=0A= > To: freebsd-questions@freebsd.org=0A= > Subject: Re: Script question=0A= >=0A= =0A= That's a very interesting shell script and will give it a try.=0A= =0A= But=2C does the script only pickup spam with a "12" tag level or does it pi= ck up 12 and above which is what I need? (sorry=2C my scripting is not stro= ng).=0A= =0A= Jason = From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 13:41:36 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 48D50CD1 for ; Sat, 13 Jun 2015 13:41:36 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp2.hushmail.com (smtp2.hushmail.com [65.39.178.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 2F25F75E for ; Sat, 13 Jun 2015 13:41:35 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp2.hushmail.com (localhost [127.0.0.1]) by smtp2.hushmail.com (Postfix) with SMTP id 13306A01B8 for ; Sat, 13 Jun 2015 13:01:45 +0000 (UTC) Received: from smtp.hushmail.com (w2.hushmail.com [65.39.178.46]) by smtp2.hushmail.com (Postfix) with ESMTP; Sat, 13 Jun 2015 13:01:44 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id E94E5E076D; Sat, 13 Jun 2015 13:01:44 +0000 (UTC) MIME-Version: 1.0 Date: Sat, 13 Jun 2015 13:01:44 +0000 To: "Joe Shevland" , freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker From: opendaddy@hushmail.com In-Reply-To: <20150610131324.E7AD3C04C8@smtp.hushmail.com> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610131324.E7AD3C04C8@smtp.hushmail.com> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150613130144.E94E5E076D@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 13:41:36 -0000 Hi! On 10. juni 2015 at 1:13 PM, "Joe Shevland" wrote: > >Postgres, Redis and Ruby are available though, so I don't think >it'd be impossible to get the RoR side of things working for >Discourse. True that. I managed to install the bundle but now during migration https://github.com/discourse/discourse/blob/master/db/migrate/20120921162512_add_meta_data_to_forum_threads.rb gives me: == 20120921162512 AddMetaDataToForumThreads: migrating ======================== -- execute("CREATE EXTENSION IF NOT EXISTS hstore") rake aborted! StandardError: An error has occurred, this and all later migrations canceled: PG::InvalidParameterValue: ERROR: version to install must be specified : CREATE EXTENSION IF NOT EXISTS hstore/usr/home/www/myapp/vendor/bundle/ruby/2.2.0/gems/activerecord-4.1.10/lib/active_record/connection_adapters/postgresql/database_statements.rb:128:in `async_exec' /usr/home/www/myapp/vendor/bundle/ruby/2.2.0/gems/activerecord-4.1.10/lib/active_record/connection_adapters/postgresql/database_statements.rb:128:in `block in execute' Docker or not, it's still odd that the migration should fail like this. I'm using PostgreSQL 9.4. O.D. > >On 10/6/2015 at 9:50 PM, opendaddy@hushmail.com wrote: >> >>Hi! >> >>Attempting to install the Discourse discussion forum >>(https://github.com/discourse/discourse) on my DigitalOcean >>FreeBSD VPS. Discourse requires Docker, however nothing happens >>when I try `wget -qO- https://get.docker.com/ | sh` >>(https://github.com/discourse/discourse/blob/master/docs/INSTALL- >>cloud.md). >> >>What am I doing wrong? >> >>Thanks! >> >>O.D. >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to "freebsd-questions- >>unsubscribe@freebsd.org" > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions- >unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 14:04:32 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id BB10893C for ; Sat, 13 Jun 2015 14:04:32 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp5.hushmail.com (smtp5.hushmail.com [65.39.178.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp.hushmail.com", Issuer "smtp.hushmail.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id A163CCC9 for ; Sat, 13 Jun 2015 14:04:32 +0000 (UTC) (envelope-from opendaddy@hushmail.com) Received: from smtp5.hushmail.com (localhost [127.0.0.1]) by smtp5.hushmail.com (Postfix) with SMTP id 5C5FA60252 for ; Sat, 13 Jun 2015 14:04:26 +0000 (UTC) Received: from smtp.hushmail.com (w2.hushmail.com [65.39.178.46]) by smtp5.hushmail.com (Postfix) with ESMTP; Sat, 13 Jun 2015 14:04:26 +0000 (UTC) Received: by smtp.hushmail.com (Postfix, from userid 99) id 37B17E04E1; Sat, 13 Jun 2015 14:04:26 +0000 (UTC) MIME-Version: 1.0 Date: Sat, 13 Jun 2015 14:04:26 +0000 To: "Joe Shevland" , freebsd-questions@freebsd.org Subject: Re: FreeBSD and Docker From: opendaddy@hushmail.com In-Reply-To: <20150613130144.E94E5E076D@smtp.hushmail.com> References: <20150610111135.C81EE2319B@smtp.hushmail.com> <20150610131324.E7AD3C04C8@smtp.hushmail.com> <20150613130144.E94E5E076D@smtp.hushmail.com> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="UTF-8" Message-Id: <20150613140426.37B17E04E1@smtp.hushmail.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 14:04:32 -0000 Hello again, Thanks to Edho Arief from the OpenBSD mailinglists it appears I was simply missing the postgresql-contrib package. Many thanks! O.D. On 13. juni 2015 at 1:41 PM, opendaddy@hushmail.com wrote: > >Hi! > >On 10. juni 2015 at 1:13 PM, "Joe Shevland" > wrote: >> >>Postgres, Redis and Ruby are available though, so I don't think >>it'd be impossible to get the RoR side of things working for >>Discourse. > >True that. I managed to install the bundle but now during >migration >https://github.com/discourse/discourse/blob/master/db/migrate/20120 >921162512_add_meta_data_to_forum_threads.rb gives me: > >== 20120921162512 AddMetaDataToForumThreads: migrating >======================== >-- execute("CREATE EXTENSION IF NOT EXISTS hstore") >rake aborted! >StandardError: An error has occurred, this and all later >migrations canceled: > >PG::InvalidParameterValue: ERROR: version to install must be >specified >: CREATE EXTENSION IF NOT EXISTS >hstore/usr/home/www/myapp/vendor/bundle/ruby/2.2.0/gems/activerecor >d- >4.1.10/lib/active_record/connection_adapters/postgresql/database_st >atements.rb:128:in `async_exec' >/usr/home/www/myapp/vendor/bundle/ruby/2.2.0/gems/activerecord- >4.1.10/lib/active_record/connection_adapters/postgresql/database_st >atements.rb:128:in `block in execute' > >Docker or not, it's still odd that the migration should fail like >this. I'm using PostgreSQL 9.4. > >O.D. > >> >>On 10/6/2015 at 9:50 PM, opendaddy@hushmail.com wrote: >>> >>>Hi! >>> >>>Attempting to install the Discourse discussion forum >>>(https://github.com/discourse/discourse) on my DigitalOcean >>>FreeBSD VPS. Discourse requires Docker, however nothing happens >>>when I try `wget -qO- https://get.docker.com/ | sh` >>>(https://github.com/discourse/discourse/blob/master/docs/INSTALL- >>>cloud.md). >>> >>>What am I doing wrong? >>> >>>Thanks! >>> >>>O.D. >>> >>>_______________________________________________ >>>freebsd-questions@freebsd.org mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>>To unsubscribe, send any mail to "freebsd-questions- >>>unsubscribe@freebsd.org" >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to "freebsd-questions- >>unsubscribe@freebsd.org" > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions- >unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 15:00:16 2015 Return-Path: Delivered-To: questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 0CFED2E7 for ; Sat, 13 Jun 2015 15:00:16 +0000 (UTC) (envelope-from aew.freebsd@wrede.ca) Received: from mailb.wapanafa.org (mailb.wapanafa.org [92.50.76.13]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id BBB36B25 for ; Sat, 13 Jun 2015 15:00:15 +0000 (UTC) (envelope-from aew.freebsd@wrede.ca) Received: from bakup (localhost [127.0.0.1]) by mailb.wapanafa.org (Postfix) with ESMTP id 7A18634BC; Sat, 13 Jun 2015 16:53:44 +0200 (CEST) X-Virus-Scanned: amavisd-new at wapanafa.org Received: from mailb.wapanafa.org ([127.0.0.1]) by bakup (mailb.wapanafa.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id t2kUyTU8D8Y6; Sat, 13 Jun 2015 16:53:43 +0200 (CEST) Received: from wookie.we.wrede.pvt (cpe74d02b3f9639-cm7cb21b1f0c7f.cpe.net.cable.rogers.com [99.251.99.129]) by mailb.wapanafa.org (Postfix) with ESMTPSA id 82EE734B4; Sat, 13 Jun 2015 16:53:42 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=wrede.ca; s=S201404; t=1434207222; bh=KW8KC1l2rmC74qhLmPGWUs7tW9w8pIxuDnbmzs64Flo=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=o8INy4IUwv5tGC85XmLYVidju4yzhwCv7ZrhcmoiEioPeh1w/uJKXHz+CiEEL1Yep Fty1W24rJuBhVNiOFupHwTlGHLVgC2gHKwJaFO4cVn5jTyRUgItI5tyfqWY4PWxhzv 9yHFUlg1HkEWr+uhwBX1l3IsxTzUjWtE5KWIvFIA= Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2098\)) Subject: Re: FreeBSD 10.1, Mac Pro 2008, EFI, hangs at boot w/ "Start @0xfff...." From: Andreas Wrede In-Reply-To: <21883.35789.822027.413019@alacrity.local> Date: Sat, 13 Jun 2015 10:53:39 -0400 Cc: FreeBSD Questions Content-Transfer-Encoding: quoted-printable Message-Id: <79D327FB-3310-4642-8B16-6361AC26BAE2@wrede.ca> References: <21883.35789.822027.413019@alacrity.local> To: hartzell@alerce.com X-Mailer: Apple Mail (2.2098) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 15:00:16 -0000 > On Jun 12, 2015, at 21:47 , George Hartzell = wrote: >=20 >=20 > I have a 2008 Mac Pro (NOT a MacBook) that's been happily running > FreeBSD for years via MBR partitioned disks. When the Mac sees the > MBR partition it kicks in a bunch of bios emulation, which lets > freebsd run. >=20 > I've recently been inspired to try the EFI booting stuff. It has the > attraction of enabling the two extra SATA ports on the motherboard (or > more accurately, not disabling them as the BIOS emulation appears > to...). >=20 > I've tried both a USB stick of 10.1 and an SSD with -CURRENT. Both > use EFI booting and work on my Minnowboard. >=20 > Booting either way exhibits the same symptom. /boot/loader.efi > runskoads the kernel and stuff but when it boots it prints >=20 > Booting... > Start @0xffffffff802e7000 ... > _ >=20 > (that's the address when booted from the SSD, the address for the 10.1 > USB stick is 0xffffffff802df060) >=20 > and then hangs. >=20 > Thinking that maybe the console was pointing off somewhere, I tried > setting it at the forth/OK prompt, it was already set to "efi", which > seems like the best choice. >=20 > It'd be nice to get it booting via EFI. Any suggestions for what to > try next? My experience with a Mac Pro (2009) is similar. I tried to boot from CD = and USB with FreeBSD 10.1 and a -current snapshot from about 2 weeks = ago. A MacBook Pro (2010) booted without a problem with the both the = 10.1 and -current USB images. The MacPro will be available for more = testing in a week or two. --=20 aew From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 17:53:17 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id E44E3705 for ; Sat, 13 Jun 2015 17:53:17 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: from mail-ie0-x230.google.com (mail-ie0-x230.google.com [IPv6:2607:f8b0:4001:c03::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id AAA959F8 for ; Sat, 13 Jun 2015 17:53:17 +0000 (UTC) (envelope-from jd1008@gmail.com) Received: by iesa3 with SMTP id a3so40821162ies.2 for ; Sat, 13 Jun 2015 10:53:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=JBLOr/bks/u9YHsEIC6XpohjSCU975vM1mL3Re+N51U=; b=CAzyrBb9C1GORbHQ1Up+jcrALyri9hLHA/EzDOHF0Ov/WsO4zcxNxA/Fko7tioGZOh G2hGunNE3agdCiO6lCL7fO4Wq2FlDV+iw7Wy5/NIst6tHZYlCk9NeQ7Wiqs1tA0Nm6Co eNoLUk0wssHZfB1IsnGGO/lZF24YrYoO4vU2qsw1OHDwPbk5pa//sj6DlRO2WFiEbrUG 1wKRBkN1ydPadBJ26SrvulhOb+2uKPGy0d1SKnkzUo1mCBFsN2DF3Eh0+1ebEkR+xU46 nM+2qW/Ye72bRtYquEzdMx4sYgJJhyaR6XO2fYt05MlwpSrXUHQdlgWn8OrHejz+cOPw TNiw== X-Received: by 10.50.29.40 with SMTP id g8mr11377402igh.41.1434217996970; Sat, 13 Jun 2015 10:53:16 -0700 (PDT) Received: from localhost.localdomain ([50.243.6.59]) by mx.google.com with ESMTPSA id d8sm3755830igl.19.2015.06.13.10.53.15 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sat, 13 Jun 2015 10:53:16 -0700 (PDT) Message-ID: <557C6DED.9070105@gmail.com> Date: Sat, 13 Jun 2015 11:52:45 -0600 From: jd1008 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: Script question References: , , , <557B8484.9060405@gmail.com> In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 17:53:18 -0000 On 06/13/2015 06:58 AM, Lt. Commander wrote: >> Date: Fri, 12 Jun 2015 19:16:52 -0600 >> From: jd1008@gmail.com >> To: freebsd-questions@freebsd.org >> Subject: Re: Script question > Here is a short shell script: > > #!/bin/sh > > while read line; do > score=`echo $line | grep ' score=.. '` > scoreValue=`echo $score | sed -e 's/score=//' -e 's/ *//'` > address=`echo $line | grep 'client_addr=[0-9]*\.[0-9]*\.[0-9]*.[0-9]* '` > IP=`echo $address | sed 's/client_addr=//'` > > if [ $scoreValue -ge 12 ]; then > echo $score > echo $IP > echo ==================== > fi > done < your-log-file-name> some-file-to-use-to-construct-the-spamassasin filter > > ---------------------------------------- >> Date: Fri, 12 Jun 2015 19:16:52 -0600 >> From: jd1008@gmail.com >> To: freebsd-questions@freebsd.org >> Subject: Re: Script question >> > That's a very interesting shell script and will give it a try. > > But, does the script only pickup spam with a "12" tag level or does it pick up 12 and above which is what I need? (sorry, my scripting is not strong). > > Jason The boolean -ge in the if test. Greater than or equal to So it grabs all 12 or greater values. > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Jun 13 19:31:31 2015 Return-Path: Delivered-To: freebsd-questions@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id BB3206F6 for ; Sat, 13 Jun 2015 19:31:31 +0000 (UTC) (envelope-from web@3dresearch.com) Received: from smtpb.telissant.net (smtpb.telissant.net [199.233.230.156]) by mx1.freebsd.org (Postfix) with ESMTP id 8E0D227C for ; Sat, 13 Jun 2015 19:31:31 +0000 (UTC) (envelope-from web@3dresearch.com) Received: from barrida.3dresearch.com (localhost [127.0.0.1]) by smtpb.telissant.net (Postfix) with ESMTP id 24A8F273C5 for ; Sat, 13 Jun 2015 15:22:01 -0400 (EDT) X-Virus-Scanned: amavisd-new at telissant.net Received: from smtpb.telissant.net ([127.0.0.1]) by barrida.3dresearch.com (barrida.3dresearch.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id C2WnLDEqAU4w for ; Sat, 13 Jun 2015 15:21:44 -0400 (EDT) Received: from almavivazfs.3dresearch.com (pool-108-3-90-25.pitbpa.east.verizon.net [108.3.90.25]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by smtpb.telissant.net (Postfix) with ESMTPSA id 25B3F27354 for ; Sat, 13 Jun 2015 15:21:44 -0400 (EDT) Received: from almavivazfs.3dresearch.com (localhost [127.0.0.1]) by almavivazfs.3dresearch.com (Postfix) with SMTP id 81D3992AF3E for ; Sat, 13 Jun 2015 15:21:43 -0400 (EDT) Date: Sat, 13 Jun 2015 15:21:36 -0400 From: Janos Dohanics To: FreeBSD Questions Subject: Re: Softlayer VPS: Loading FreeBSD Message-Id: <20150613152136.1beb58c637f27d88a4215a0c@3dresearch.com> In-Reply-To: <557A2B5F.4010603@buildingonline.com> References: <6277AB8E-EDF5-436A-B1A9-5C041041E165@hub.org> <64385A15-591B-4933-BD83-45EAA5A372C5@hub.org> <557A0B64.9050808@sysconfig.org.uk> <557A241D.5090307@gmail.com> <3D2FF45C-9C83-4504-8051-4A409E06F8BE@hub.org> <557A2B5F.4010603@buildingonline.com> X-Mailer: Sylpheed 3.4.2 (GTK+ 2.24.27; amd64-portbld-freebsd10.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Jun 2015 19:31:31 -0000 On Thu, 11 Jun 2015 18:44:15 -0600 Dan Busarow wrote: > Marc, > > Checkout rootbsd.net > > I have 10 VPS and 1 dedicated server there. Excellent BSD support as > you might gather from the name. > > Dan > -- > Dan Busarow > BuildingOnline.com > http://www.BuildingOnline.net/ > 888-496-6648 ext 218 I second that. Their service has been reliable, and their support is prompt and knowledgeable. -- Janos Dohanics