Date: Thu, 1 Oct 2015 23:26:09 +0000 (UTC) From: Pallav Bose <pallav_bose@yahoo.com> To: Sibananda Sahu <sibananda.sahu@avagotech.com> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: mfi(4) driver | FreeBSD 8 | Dell PERC H730 Message-ID: <783933153.4012.1443741969459.JavaMail.yahoo@mail.yahoo.com> In-Reply-To: <CA%2BK2bu_s-eVF14Aj7vKkQABDm3MjCvtcd4-wWoU5720a8_3UCw@mail.gmail.com> References: <CA%2BK2bu_s-eVF14Aj7vKkQABDm3MjCvtcd4-wWoU5720a8_3UCw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Sibananda,
I tried using StorCli to query the RAID controller, but it could not recogn=
ize it.=20
MegaCli output:
# MegaCli -adpcount
Controller Count: 1.
Exit Code: 0x01
# MegaCli -adpallinfo -aall
Adapter #0
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 Versions
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Product Name=C2=A0=C2=A0=C2=A0 : PERC H730 Mini
Serial No=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : 53D00I2
FW Package Build: 25.3.0.0016
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 Mfg. Data
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Mfg. Date=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : 03/18/15
Rework Date=C2=A0=C2=A0=C2=A0=C2=A0 : 03/18/15
Revision No=C2=A0=C2=A0=C2=A0=C2=A0 : A01
Battery FRU=C2=A0=C2=A0=C2=A0=C2=A0 : N/A
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 Image Versions in Flash:
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
BIOS Version=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : 6.23.03.0_4.16.07.00_0x0=
60C0200
Ctrl-R Version=C2=A0=C2=A0=C2=A0=C2=A0 : 5.04-0012
FW Version=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 : 4.250.00-4402
NVDATA Version=C2=A0=C2=A0=C2=A0=C2=A0 : 3.1411.00-0019
Boot Block Version : 3.02.00.00-0001
<remaining output snipped>
StorCli output:
# id
uid=3D0(root) gid=3D0(wheel) groups=3D0(wheel)
# storcli show all
Status Code =3D 0
Status =3D Success
Description =3D None
Number of Controllers =3D 0
Host Name =3D test.
Operating System=C2=A0 =3D FreeBSD8.0-RELEASE
# storcli /c0 show all
Controller =3D 0
Status =3D Failure
Description =3D Controller 0 not found
Using storcli64:
# storcli64 show all
Status Code =3D 0
Status =3D Success
Description =3D None
Number of Controllers =3D 0
Host Name =3D test.
Operating System=C2=A0 =3D FreeBSD8.0-RELEASE
panzura# storcli64 /c0 show all
Controller =3D 0
Status =3D Failure
Description =3D Controller 0 not found
Can you help me debug this issue? Thanks!
Regards,
Pallav=20
On Thursday, September 24, 2015 6:08 PM, Sibananda Sahu <sibananda.sah=
u@avagotech.com> wrote:
=20
Yes MegaCli and StorCli from LSI works with mrsas(4).There were plans to i=
nclude mfiutil(8) support for mrsas(4) but may be later it will be merged.O=
n Sep 25, 2015 4:30 AM, "Pallav Bose" <pallav_bose@yahoo.com> wrote:
Hi Sibananda,
Thank you for the pointer. I was able to compile mrsas(4) for FreeBSD 8.0. =
Can you please tell me whether MegaCli can be used with the mrsas(4) driver=
? I have been mfiutil(8) and MegaCli so far along with the mfi(4) driver. O=
bviously mfiutil(8) cannot be used with mrsas(4).
=C2=A0Thanks,Pallav=20
=20
On Tuesday, September 22, 2015 2:06 AM, Sibananda Sahu <sibananda.sahu@av=
agotech.com> wrote:
=20
I think you can check the mrsas(4) for the same.
See here for the man page and supported controllers:
https://www.freebsd.org/cgi/man.cgi?query=3Dmrsas&sektion=3D4
You can check LSI's (Avago) website for the latest available driver:
http://www.avagotech.com/products/server-storage/raid-controllers/megaraid
-sas-9380-8e#downloads
Go to the Driver section and find out the latest FreeBSD driver available.
Download and compile the code for FreeBSD 8.x.
Thanks
Sibananda Sahu
-----Original Message-----
From: owner-freebsd-scsi@freebsd.org
[mailto:owner-freebsd-scsi@freebsd.org] On Behalf Of Pallav Bose via
freebsd-scsi
Sent: Wednesday, September 16, 2015 4:46 AM
To: freebsd-scsi@freebsd.org
Subject: mfi(4) driver | FreeBSD 8 | Dell PERC H730
Hi,
Is there a port of the mfi(4) driver for FreeBSD 8.x to support Dell's
PowerEdge RAID Controller H730? It is built on the LSI SAS 3108 chip.
Thanks,Pallav
_______________________________________________
freebsd-scsi@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?783933153.4012.1443741969459.JavaMail.yahoo>