Date: Wed, 13 May 2015 17:05:05 +0200 From: "jurgenxiv@t-online.de" <jurgenxiv@t-online.de> To: freebsd-usb@freebsd.org Subject: USB Virtualbox Message-ID: <160293270155536821924ee4.16088245@email.t-online.de>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi everyone, I try to get my iPad recognized with a Windows 7 guest and Virtualbox under freebsd 10 host. Because there is no usb 2.0 support for freebsd-virtualbox I try to force it to usb 1. I am using "sysctl hw.usb.ehci.no_hs=1" as mentioned here http://www.clearchain.com/blog/posts/how-to-use-freebsd-virtualbox-and-usb2-0-devices But even after disconnecting and reconnecting iPad is still is at usb 2.0 speed. Is there another way to use usb devices in Virtualbox? [-- Attachment #2 --] hostb0@pci0:0:0:0: class=0x060000 card=0x75811462 chip=0xd1318086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor DMI' class = bridge subclass = HOST-PCI pcib1@pci0:0:3:0: class=0x060400 card=0x75811462 chip=0xd1388086 rev=0x11 hdr=0x01 vendor = 'Intel Corporation' device = 'Core Processor PCI Express Root Port 1' class = bridge subclass = PCI-PCI none0@pci0:0:8:0: class=0x088000 card=0x00810062 chip=0xd1558086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor System Management Registers' class = base peripheral none1@pci0:0:8:1: class=0x088000 card=0x00810062 chip=0xd1568086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Semaphore and Scratchpad Registers' class = base peripheral none2@pci0:0:8:2: class=0x088000 card=0x00810062 chip=0xd1578086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor System Control and Status Registers' class = base peripheral none3@pci0:0:8:3: class=0x088000 card=0x00810062 chip=0xd1588086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Miscellaneous Registers' class = base peripheral none4@pci0:0:16:0: class=0x088000 card=0x00810062 chip=0xd1508086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QPI Link' class = base peripheral none5@pci0:0:16:1: class=0x088000 card=0x00810062 chip=0xd1518086 rev=0x11 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QPI Routing and Protocol Registers' class = base peripheral ehci0@pci0:0:26:0: class=0x0c0320 card=0x75811462 chip=0x3b3c8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB hdac0@pci0:0:27:0: class=0x040300 card=0x75811462 chip=0x3b568086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset High Definition Audio' class = multimedia subclass = HDA pcib2@pci0:0:28:0: class=0x060400 card=0x75811462 chip=0x3b428086 rev=0x05 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x75811462 chip=0x3b448086 rev=0x05 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 2' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:2: class=0x060400 card=0x75811462 chip=0x3b468086 rev=0x05 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 3' class = bridge subclass = PCI-PCI pcib5@pci0:0:28:3: class=0x060400 card=0x75811462 chip=0x3b488086 rev=0x05 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 4' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x75811462 chip=0x3b348086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib6@pci0:0:30:0: class=0x060401 card=0x75811462 chip=0x244e8086 rev=0xa5 hdr=0x01 vendor = 'Intel Corporation' device = '82801 PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x75811462 chip=0x3b028086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series Chipset LPC Interface Controller' class = bridge subclass = PCI-ISA ahci1@pci0:0:31:2: class=0x010601 card=0x75811462 chip=0x3b228086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller' class = mass storage subclass = SATA none6@pci0:0:31:3: class=0x0c0500 card=0x75811462 chip=0x3b308086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset SMBus Controller' class = serial bus subclass = SMBus vgapci0@pci0:1:0:0: class=0x030000 card=0x30361462 chip=0x68101002 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD] nee ATI' class = display subclass = VGA none7@pci0:1:0:1: class=0x040300 card=0xaab01462 chip=0xaab01002 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices [AMD] nee ATI' class = multimedia subclass = HDA re0@pci0:2:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet re1@pci0:3:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet none8@pci0:4:0:0: class=0x0c0010 card=0x581d1462 chip=0x34031106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies, Inc.' device = 'VT6315 Series Firewire Controller' class = serial bus subclass = FireWire atapci0@pci0:5:0:0: class=0x010185 card=0x75811462 chip=0x2363197b rev=0x03 hdr=0x00 vendor = 'JMicron Technology Corp.' device = 'JMB363 SATA/IDE Controller' class = mass storage subclass = ATA [-- Attachment #3 --] ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.2: <product 0x0020 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.3: <USB-PS2 Optical Mouse Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (98mA) ugen1.3: <iPad Apple Inc.> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen1.4: <Mass Storage Device Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (250mA)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?160293270155536821924ee4.16088245>