Date: Sun, 28 Feb 2016 15:11:52 -0500 From: Douglas Gilbert <dgilbert@interlog.com> To: freebsd-scsi@freebsd.org Subject: [Announce] sg3_utils 1.42 and sdparm 1.10 Message-ID: <56D35488.9070507@interlog.com>
next in thread | raw e-mail | index | archive | help
I recently released these two SCSI support packages, information and downloads on these pages: http://sg.danny.cz/sg/sg3_utils.html http://sg.danny.cz/sg/sdparm.html Recent betas of some of my other packages (e.g. smp_utils and ddpt) have links at the top of this page: http://sg.danny.cz/sg/index.html Note that lsscsi is Linux only and is roughly equivalent to 'camcontrol devlist'. Changelog for sg3_utils-1.42 [20160217] [svn: r663] - sg_timestamp: new, to report or set timestamp - sg_read_attr: new, supported by tape drives - sg_stpg: fix truncation of target port field - sg_inq: cope with unicode strings, udev fixes - update version descriptor list to 20160125 - '--export': new entries for UUID descriptor - sg_ses: add more field acronyms (ses3r11) - sg_logs: add Utilization lpage (sbc4r07) - add Background operation lpage - add Pending defects lpage - add LPS misalignment lpage (sbc4r10) - document '--All' ('-A') option - rework lto tape vendor lpages - sg_vpd: add Block limits extension VPD page - add Device constituents VPD page - add LB Protection VPD page (ssc 15-296r1) - LB provisioning VPD page: expand LBPRZ, add Minimum and Threshold percentage fields - rework lto tape vendor VPD pages - sg_inq+sg_vpd+sg_xcopy: add support for locally assigned UUIDs in VPD page 0x83 (15-267r2) - sg_sanitize: add --znr option (sbc4r07) - sg_rep_zones: add --partial option (zbc-r04) - sg_format: add ffmt option (sbc4r10) - add support for FORMAT MEDIUM (for tape) - sg_raw: document length relationships - rescan-scsi-bus.sh: updates from Suse - sg_lib_data: sync asc/ascq codes with T10 20151126 - sg_lib: add 'sense' categories for SCSI statuses: condition met, busy, task set full, ACA active and task aborted - add pr2serr() extern - change sg_get_sense_str() and dStrHexStr(), return chars written (returned void previously) - add sg_get_sense_descriptors_str() function - add sg_get_designation_descriptor_str() function - sg_get_desig_type_str()+sg_get_desig_assoc_str() and sg_get_desig_code_set_str() added - sg_get_opcode_sa_name() break out zoning in/out, read attribute and read position service actions - sg_cmds_extra: add sg_ll_format_unit2() for FFMT - sg_pr2serr.h: new, to shorten fprintf(stderr, ...) - sg_io_linux, sg_pt_linux: drop SUGGEST_* decoding - sg_unaligned.h: add 48 bit support and gets for variable length unsigned integers Changelog for sg3_utils-1.41 [20150511] [svn: r644] ... ChangeLog for sdparm-1.10 [20160222] [svn: r279] - add --inhex=FN option for decoding without device present, FN is interpreted as response to mode sense(10) command - add --raw option to interpret FN as binary (def: ASCII hex) - add --pdt=PDT option for use with --inhex=FN - --quiet used twice hides changeable, default + saved - add IO advice hints grouping mode page (sbc4r06, 8) - add Unit serial number VPD page specific sanity check - add NO_PI_CHK to Supported block lengths and protection types VPD page - add Background operation control mpage (sbc4r07) - Read-write error recovery mpage: add Misaligned writes reporting field (MWR) - sync tape mpages with ssc5r02 - add Block limits extension VPD page - add Device constituents VPD page - add LB protection VPD page (ssc5r02a) - LB provisioning VPD page: expand LBPRZ, add Minimum and Threshold percentage fields - device identification VPD page: add decoding for locally assigned UUIDs (spc5r08) - the --inhex=FN option together with --inquiry decodes FN as a single VPD page - improve lto5 and lto6 vendor mpage support - sync to spc5r08 and sbc4r10 - add SAS G5 (22.5 Gbps) settings (spl4r06) - point svn:externals to rev 663 of sg3_utils - upgrade automake to version 1.15 (U15.10) - autogen.sh: upgrade to buildconf 20091223 version ChangeLog for sdparm-1.09 [20141226] [svn: r257] ... Doug Gilbert
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56D35488.9070507>