<varname>AllowUsers</varname> ユーザオプション

Abstract

This document lists errata items for FreeBSD 10.4-RELEASE, containing significant information discovered after the release or too late in the release cycle to be otherwise included in the release documentation. This information @@ -73,7 +73,7 @@ boot

System source code distribution was not selected during installation, it can be obtained using svnlite:

# mkdir -p /usr/src
-# svnlite co svn://svn.freebsd.org/base/releng/10.2 /usr/src

Build the kernel-toolchain required +# svnlite co https://svn.freebsd.org/base/releng/10.4 /usr/src

Build the kernel-toolchain required to rebuild the kernel:

# make -C /usr/src kernel-toolchain

Next, create a kernel configuration file to increase the KSTACK_PAGES option:

# printf "include GENERIC\noptions KSTACK_PAGES=4\n" > /usr/src/sys/i386/conf/ZFS

Then build and install the ZFS kernel:

# make -C /usr/src buildkernel KERNCONF=ZFS

From owner-svn-doc-head@freebsd.org  Tue Oct  3 21:37:51 2017
Return-Path: 
Delivered-To: svn-doc-head@mailman.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
 [IPv6:2001:1900:2254:206a::19:1])
 by mailman.ysv.freebsd.org (Postfix) with ESMTP id 543D9E254A1;
 Tue,  3 Oct 2017 21:37:51 +0000 (UTC)
 (envelope-from marius@FreeBSD.org)
Received: from repo.freebsd.org (repo.freebsd.org
 [IPv6:2610:1c1:1:6068::e6a:0])
 (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (Client did not present a certificate)
 by mx1.freebsd.org (Postfix) with ESMTPS id 20FE3650D7;
 Tue,  3 Oct 2017 21:37:51 +0000 (UTC)
 (envelope-from marius@FreeBSD.org)
Received: from repo.freebsd.org ([127.0.1.37])
 by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v93Lbowx052769;
 Tue, 3 Oct 2017 21:37:50 GMT (envelope-from marius@FreeBSD.org)
Received: (from marius@localhost)
 by repo.freebsd.org (8.15.2/8.15.2/Submit) id v93LboMX052768;
 Tue, 3 Oct 2017 21:37:50 GMT (envelope-from marius@FreeBSD.org)
Message-Id: <201710032137.v93LboMX052768@repo.freebsd.org>
X-Authentication-Warning: repo.freebsd.org: marius set sender to
 marius@FreeBSD.org using -f
From: Marius Strobl 
Date: Tue, 3 Oct 2017 21:37:50 +0000 (UTC)
To: doc-committers@freebsd.org, svn-doc-all@freebsd.org,
 svn-doc-head@freebsd.org
Subject: svn commit: r51039 - head/en_US.ISO8859-1/htdocs/releases/10.4R
X-SVN-Group: doc-head
X-SVN-Commit-Author: marius
X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/10.4R
X-SVN-Commit-Revision: 51039
X-SVN-Commit-Repository: doc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
X-BeenThere: svn-doc-head@freebsd.org
X-Mailman-Version: 2.1.23
Precedence: list
List-Id: SVN commit messages for the doc tree for head
 
List-Unsubscribe: ,
 
List-Archive: 
List-Post: 
List-Help: 
List-Subscribe: ,
 
X-List-Received-Date: Tue, 03 Oct 2017 21:37:51 -0000

Author: marius (src,ports committer)
Date: Tue Oct  3 21:37:50 2017
New Revision: 51039
URL: https://svnweb.freebsd.org/changeset/doc/51039

Log:
  Remove dangling tag closure and obsolete, commented 10.4 todo reference.
  
  Approved by:	re (implicit)

Modified:
  head/en_US.ISO8859-1/htdocs/releases/10.4R/index.xml

Modified: head/en_US.ISO8859-1/htdocs/releases/10.4R/index.xml
==============================================================================
--- head/en_US.ISO8859-1/htdocs/releases/10.4R/index.xml	Tue Oct  3 19:09:41 2017	(r51038)
+++ head/en_US.ISO8859-1/htdocs/releases/10.4R/index.xml	Tue Oct  3 21:37:50 2017	(r51039)
@@ -47,7 +47,6 @@
   &os; &local.rel;-RELEASE errata

-  ?>
 
   &os; &local.rel;-RELEASE schedule

-
-  &os; Release
-    Engineering TODO Page

-  ?>
 
   
 

From owner-svn-doc-head@freebsd.org  Wed Oct  4 14:05:02 2017
Return-Path: 
Delivered-To: svn-doc-head@mailman.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org
 [IPv6:2001:1900:2254:206a::19:1])
 by mailman.ysv.freebsd.org (Postfix) with ESMTP id BD361E3A479;
 Wed,  4 Oct 2017 14:05:02 +0000 (UTC)
 (envelope-from ryusuke@FreeBSD.org)
Received: from repo.freebsd.org (repo.freebsd.org
 [IPv6:2610:1c1:1:6068::e6a:0])
 (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
 (Client did not present a certificate)
 by mx1.freebsd.org (Postfix) with ESMTPS id 8E04963580;
 Wed,  4 Oct 2017 14:05:02 +0000 (UTC)
 (envelope-from ryusuke@FreeBSD.org)
Received: from repo.freebsd.org ([127.0.1.37])
 by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v94E51MJ066249;
 Wed, 4 Oct 2017 14:05:01 GMT (envelope-from ryusuke@FreeBSD.org)
Received: (from ryusuke@localhost)
 by repo.freebsd.org (8.15.2/8.15.2/Submit) id v94E51rG066245;
 Wed, 4 Oct 2017 14:05:01 GMT (envelope-from ryusuke@FreeBSD.org)
Message-Id: <201710041405.v94E51rG066245@repo.freebsd.org>
X-Authentication-Warning: repo.freebsd.org: ryusuke set sender to
 ryusuke@FreeBSD.org using -f
From: Ryusuke SUZUKI 
Date: Wed, 4 Oct 2017 14:05:01 +0000 (UTC)
To: doc-committers@freebsd.org, svn-doc-all@freebsd.org,
 svn-doc-head@freebsd.org
Subject: svn commit: r51040 - in head/ja_JP.eucJP/htdocs: . releases security
X-SVN-Group: doc-head
X-SVN-Commit-Author: ryusuke
X-SVN-Commit-Paths: in head/ja_JP.eucJP/htdocs: . releases security
X-SVN-Commit-Revision: 51040
X-SVN-Commit-Repository: doc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
X-BeenThere: svn-doc-head@freebsd.org
X-Mailman-Version: 2.1.23
Precedence: list
List-Id: SVN commit messages for the doc tree for head
 
List-Unsubscribe: ,
 
List-Archive: 
List-Post: 
List-Help: 
List-Subscribe: ,
 
X-List-Received-Date: Wed, 04 Oct 2017 14:05:02 -0000

Author: ryusuke
Date: Wed Oct  4 14:05:01 2017
New Revision: 51040
URL: https://svnweb.freebsd.org/changeset/doc/51040

Log:
  - Merge the following from the English version:
  
  	r51023 -> r51033	head/ja_JP.eucJP/htdocs/index.xsl
  	r50875 -> r51033	head/ja_JP.eucJP/htdocs/releases/index.xml
  	r50754 -> r51033	head/ja_JP.eucJP/htdocs/security/security.xml
  	r50853 -> r51033	head/ja_JP.eucJP/htdocs/where.xml

Modified:
  head/ja_JP.eucJP/htdocs/index.xsl
  head/ja_JP.eucJP/htdocs/releases/index.xml
  head/ja_JP.eucJP/htdocs/security/security.xml
  head/ja_JP.eucJP/htdocs/where.xml

Modified: head/ja_JP.eucJP/htdocs/index.xsl
==============================================================================
--- head/ja_JP.eucJP/htdocs/index.xsl	Tue Oct  3 21:37:50 2017	(r51039)
+++ head/ja_JP.eucJP/htdocs/index.xsl	Wed Oct  4 14:05:01 2017	(r51040)
@@ -5,7 +5,7 @@
 ]>
 
 
-
+
 
 &rel0.current;,
 					&rel1.current;
+				href="&u.rel1.announce;">&rel1.current;,
+					&rel2.current;
 			    
 			    次回予定: &betarel.current;

Modified: head/ja_JP.eucJP/htdocs/releases/index.xml
==============================================================================
--- head/ja_JP.eucJP/htdocs/releases/index.xml	Tue Oct  3 21:37:50 2017	(r51039)
+++ head/ja_JP.eucJP/htdocs/releases/index.xml	Wed Oct  4 14:05:01 2017	(r51040)
@@ -5,7 +5,7 @@
 ]>
 
 
-
+
 
 
 
@@ -73,6 +73,17 @@
 	README :
 	Errata (正誤表) :
 	チェックサム
+	
+
+      Release &rel2.current; (&rel2.current.date;)
+	
+	アナウンス :
+	リリースノート :
+	インストールガイド :
+	ハードウェアノート :
+	README :
+	Errata (正誤表) :
+	チェックサム
 	
 
   

Modified: head/ja_JP.eucJP/htdocs/security/security.xml
==============================================================================
--- head/ja_JP.eucJP/htdocs/security/security.xml	Tue Oct  3 21:37:50 2017	(r51039)
+++ head/ja_JP.eucJP/htdocs/security/security.xml	Wed Oct  4 14:05:01 2017	(r51040)
@@ -5,7 +5,7 @@
 ]>
 
 
-
+
 
 
   
@@ -152,7 +152,7 @@

+ &os; &release.current; Hardware Notes + + + The &os; Documentation Project + + $FreeBSD$ + + + 2000 + 2001 + 2002 + 2003 + 2004 + 2005 + 2006 + 2007 + 2008 + 2009 + 2010 + 2011 + 2012 + 2013 + 2014 + 2015 + 2016 + 2017 + The &os; Documentation Project + + + + &tm-attrib.freebsd; + &tm-attrib.amd; + &tm-attrib.fujitsu; + &tm-attrib.ibm; + &tm-attrib.intel; + &tm-attrib.sparc; + &tm-attrib.sun; + &tm-attrib.general; + + + + + + Introduction + + This document contains the hardware compatibility notes for + &os; &release.current;. It lists the hardware platforms + supported by &os;, as well as the various types of hardware + devices (storage controllers, network interfaces, and so on), + along with known working instances of these devices. + + + + Supported Processors and System Boards + + This section provides some architecture-specific information + about the specific processors and systems that are supported by + each architecture. + + + amd64 + + Since mid-2003 &os;/&arch.amd64; has supported the AMD64 + (Hammer) and &intel; EM64T architecture, and is + now one of the Tier-1 platforms (fully supported + architecture), which are expected to be Production Quality + with respects to all aspects of the &os; operating system, + including installation and development environments. + + Note that there are two names for this architecture, AMD64 + (AMD) and Intel EM64T (Extended Memory 64-bit Technology). + 64-bit mode of the two architectures are almost compatible + with each other, and &os;/&arch.amd64; supports them + both. + + As of this writing, the following processors are + supported: + + + + &amd.athlon;64 (Clawhammer). + + + + &amd.opteron; (Sledgehammer). + + + + &amd.sempron;. + + + + &amd.turion;. + + + + &amd.phenom;. + + + + All multi-core &intel; &xeon; processors except + Sossaman have EM64T support. + + + + The single-core &intel; &xeon; + processors Nocona, Irwindale, + Potomac, and Cranford have + EM64T support. + + + + All &intel; &core; 2 (not &core; Duo) and later + processors + + + + All &intel; &core; i range of processors + + + + All &intel; &pentium; D processors + + + + All &intel; ¢rino; Duo and ¢rino; Pro platforms + + + + &intel; &pentium; 4s and &celeron; Ds using + the Cedar Mill core have EM64T + support. + + + + Some &intel; &pentium; 4s and &celeron; Ds using + the Prescott core have EM64T support. See + the Intel + Processor Spec Finder for the definitive answer about + EM64T support in Intel processors. + + + + + &intel; EM64T is an extended version of IA-32 (x86) and + different from &intel; IA-64 (Itanium) architecture. Some of + &intel;'s old documentation refers to &intel; EM64T as + 64-bit extension technology or + IA-32e. + + Both Uniprocessor (UP) and Symmetric Multi-processor (SMP) + configurations are supported. + + In many respects, &os;/&arch.amd64; is similar to + &os;/&arch.i386;, in terms of drivers supported. Generally, + drivers that already function correctly on other 64-bit + platforms should work. + + + + + i386 + + &os;/&arch.i386; runs on a wide variety of IBM PC + compatible machines. Due to the wide range of + hardware available for this architecture, it is impossible + to exhaustively list all combinations of equipment supported + by &os;. Nevertheless, some general guidelines are + presented here. + + Almost all &i386;-compatible processors with a floating + point unit are supported. All &intel; processors beginning + with the 80486 are supported, including the 80486, &pentium;, + &pentium; Pro, &pentium; II, &pentium; III, &pentium; 4, and + variants thereof, such as the &xeon; and &celeron; processors. + All &i386;-compatible AMD processors are also supported, + including the &am486;, &am5x86;, K5, &amd.k6; (and variants), + &amd.athlon; (including Athlon-MP, Athlon-XP, Athlon-4, and + Athlon Thunderbird), and &amd.duron; processors. The AMD + Élan SC520 embedded processor is supported. The + Transmeta Crusoe is recognized and supported, as are + &i386;-compatible processors from Cyrix and NexGen. + + There is a wide variety of motherboards available for this + architecture. Motherboards using the ISA, VLB, EISA, AGP, and + PCI expansion buses are well-supported. There is some + limited support for the MCA (MicroChannel) + expansion bus used in the IBM PS/2 line of PCs. + + Symmetric multi-processor (SMP) systems are generally + supported by &os;, although in some cases, BIOS or motherboard + bugs may generate some problems. Perusal of the archives of + the &a.smp; may yield some clues. + + &os; will take advantage of SMT (Symmetric MultiThreading, + also known as HyperThreading on &intel; CPUs) on the supported + CPUs. The GENERIC kernel which is + installed by default will automatically detect the additional + logical processors. The default &os; scheduler recognizes + processor topology on the system and selects logical and + physical processors to obtain optimal performance. + The &man.smp.4; manual page has more details. + + &os; will take advantage of Physical Address Extensions + (PAE) support on CPUs that support this feature. A kernel + with the PAE feature enabled will detect + memory above 4 gigabytes and allow it to be used by the + system. This feature places constraints on the device drivers + and other features of &os; which may be used; consult the + &man.pae.4; manual page for more details. + + &os; will generally run on i386-based laptops, albeit with + varying levels of support for certain hardware features such + as sound, graphics, power management, and PCCARD expansion + slots. These features tend to vary in idiosyncratic ways + between machines, and frequently require special-case support + in &os; to work around hardware bugs or other oddities. When + in doubt, a search of the archives of the &a.mobile; may be + useful. + + Most modern laptops (as well as many desktops) use the + Advanced Configuration and Power Management (ACPI) standard. + &os; supports ACPI via the ACPI Component Architecture + reference implementation from &intel;, as described in the + &man.acpi.4; manual page. The use of ACPI causes + instabilities on some machines and it may be necessary to + disable the ACPI driver, which is normally loaded via a kernel + module. This may be accomplished by adding the following line + to /boot/device.hints: + + hint.acpi.0.disabled="1" + + Users debugging ACPI-related problems may find it useful + to disable portions of the ACPI functionality. The + &man.acpi.4; manual page has more information on how to do + this via loader tunables. + + ACPI depends on a Differentiated System Descriptor Table + (DSDT) provided by each machine's BIOS. Some machines have + bad or incomplete DSDTs, which prevents ACPI from functioning + correctly. Replacement DSDTs for some machines can be found + at the DSDT + section of the ACPI4Linux project + Web site. &os; can use these DSDTs to override the DSDT + provided by the BIOS; see the &man.acpi.4; manual page for + more information. + + + + powerpc + + All Apple PowerPC machines with built-in USB are supported, + as well a limited selection of non-Apple machines, + including KVM on POWER7 + + SMP is supported on all systems with more than + 1 processor. + + + + sparc64 + + This section describes the systems currently known to be + supported by &os; on the Fujitsu &sparc64; and Sun &ultrasparc; + platforms. + + SMP is supported on all systems with more than 1 + processor. + + When using the GENERIC kernel, + &os;/&arch.sparc64; systems not equipped with a framebuffer + supported by the &man.creator.4; (Sun Creator, Sun Creator3D + and Sun Elite3D) or &man.machfb.4; (Sun PGX and Sun PGX64 + as well as the ATI Mach64 chips found onboard in for example + &sun.blade; 100, &sun.blade; 150, &sun.ultra; 5 and &sun.ultra; 10) + driver must use the serial console. + + If you have a system that is not listed here, it may not + have been tested with &os; &release.current;. We encourage + you to try it and send a note to the &a.sparc; with your + results, including which devices work and which do not. + + The following systems are fully supported by &os;: + + + + Naturetech GENIALstation 777S + + + + &sun.blade; 100 + + + + &sun.blade; 150 + + + + &sun.enterprise; 150 + + + + &sun.enterprise; 220R + + + + &sun.enterprise; 250 + + + + &sun.enterprise; 420R + + + + &sun.enterprise; 450 + + + + &sun.fire; B100s (support for the on-board NICs first + appeared in 8.1-RELEASE) + + + + &sun.fire; V100 + + + + &sun.fire; V120 + + + + Sun &netra; t1 100/105 + + + + Sun &netra; T1 AC200/DC200 + + + + Sun &netra; t 1100 + + + + Sun &netra; t 1120 + + + + Sun &netra; t 1125 + + + + Sun &netra; t 1400/1405 + + + + Sun &netra; 120 + + + + Sun &netra; X1 + + + + Sun &sparcengine; Ultra AX1105 + + + + Sun &sparcengine; Ultra AXe + + + + Sun &sparcengine; Ultra AXi + + + + Sun &sparcengine; Ultra AXmp + + + + Sun &sparcengine; CP1500 + + + + &sun.ultra; 1 + + + + &sun.ultra; 1E + + + + &sun.ultra; 2 + + + + &sun.ultra; 5 + + + + &sun.ultra; 10 + + + + &sun.ultra; 30 + + + + &sun.ultra; 60 + + + + &sun.ultra; 80 + + + + &sun.ultra; 450 + + + + The following systems are partially supported by &os;. In + particular the fiber channel controllers in SBus-based systems are not + supported. However, it is possible to use these with a SCSI controller + supported by the &man.esp.4; driver (Sun ESP SCSI, Sun FAS Fast-SCSI + and Sun FAS366 Fast-Wide SCSI controllers). + + + + &sun.enterprise; 3500 + + + + &sun.enterprise; 4500 + + + + Starting with 7.2-RELEASE, &arch.sparc64; systems based on Sun + &ultrasparc; III and beyond are also supported by &os;, which includes + the following known working systems: + + + + &sun.blade; 1000 + + + + &sun.blade; 1500 + + + + &sun.blade; 2000 + + + + &sun.blade; 2500 + + + + &sun.fire; 280R + + + + &sun.fire; V210 + + + + &sun.fire; V215 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) + + + + &sun.fire; V240 + + + + &sun.fire; V245 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) + + + + &sun.fire; V250 + + + + &sun.fire; V440 (support for the on-board NICs first + appeared in 7.3-RELEASE and 8.0-RELEASE) + + + + &sun.fire; V480 (501-6780 and 501-6790 centerplanes only, for + which support first appeared in 7.3-RELEASE and 8.1-RELEASE, + other centerplanes might work beginning with 8.3-RELEASE and 9.0-RELEASE) + + + + &sun.fire; V880 + + + + &sun.fire; V890 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, + non-mixed &ultrasparc; IV/IV+ CPU-configurations only) + + + + &netra; 20/&netra; T4 + + + + The following Sun &ultrasparc; systems are not tested but + believed to be also supported by &os;: + + + + &sun.fire; V125 + + + + &sun.fire; V490 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, + non-mixed &ultrasparc; IV/IV+ CPU-configurations only) + + + + Starting with 7.4-RELEASE and 8.1-RELEASE, &arch.sparc64; systems based on + Fujitsu &sparc64; V are also supported by &os;, which + includes the following known working systems: + + + + Fujitsu &primepower; 250 + + + + The following Fujitsu &primepower; systems are not tested but + believed to be also supported by &os;: + + + + Fujitsu &primepower; 450 + + + + Fujitsu &primepower; 650 + + + + Fujitsu &primepower; 850 + + + + + + + + + + Supported Devices + + This section describes the devices currently known to be + supported by &os;. Other configurations may also work, but + simply have not been tested yet. Feedback, updates, and + corrections to this list are encouraged. + + Where possible, the drivers applicable to each device or + class of devices is listed. If the driver in question has a + manual page in the &os; base distribution (most should), it is + referenced here. Information on specific models of supported + devices, controllers, etc. can be found in the manual + pages. + + + The device lists in this document are being generated + automatically from &os; manual pages. This means that some + devices, which are supported by multiple drivers, may appear + multiple times. + + + + Disk Controllers + + [&arch.amd64;, &arch.i386;, &arch.sparc64;] + IDE/ATA controllers (&man.ata.4; driver) + + &hwlist.aac; + + &hwlist.adv; + + &hwlist.adw; + + &hwlist.aha; + + &hwlist.ahc; + + &hwlist.ahci; + + &hwlist.ahd; + + &hwlist.aic; + + &hwlist.amr; + + &hwlist.arcmsr; + + &hwlist.bt; + + &hwlist.ciss; + + &hwlist.dpt; + + + [&arch.amd64;, &arch.i386;] Booting from these + controllers is supported. EISA adapters are not + supported. + + + &hwlist.esp; + + &hwlist.hpt27xx; + + &hwlist.hptiop; + + &hwlist.hptmv; + + &hwlist.hptrr; + + &hwlist.ida; + + &hwlist.iir; + + &hwlist.ips; + + &hwlist.isci; + + &hwlist.isp; + + &hwlist.mfi; + + &hwlist.mlx; + + + [&arch.amd64;, &arch.i386;] Booting from these + controllers is supported. EISA adapters are not + supported. + + + &hwlist.mly; + + &hwlist.mpr; + + &hwlist.mps; + + &hwlist.mpt; + + &hwlist.mrsas; + + &hwlist.mvs; + + &hwlist.ncr; + + &hwlist.ncv; + + &hwlist.nsp; + + &hwlist.pms; + + &hwlist.pst; + + &hwlist.siis; + + &hwlist.stg; + + &hwlist.sym; + + &hwlist.trm; + + &hwlist.twa; + + &hwlist.twe; + + &hwlist.tws; + + &hwlist.vpo; + + With all supported SCSI controllers, full support is + provided for SCSI-I, SCSI-II, and SCSI-III peripherals, + including hard disks, optical disks, tape drives (including + DAT, 8mm Exabyte, Mammoth, and DLT), medium changers, + processor target devices and CD-ROM drives. WORM devices that + support CD-ROM commands are supported for read-only access by + the CD-ROM drivers (such as &man.cd.4;). WORM/CD-R/CD-RW + writing support is provided by &man.cdrecord.1;, which is a + part of the sysutils/cdrtools port in the Ports + Collection. + + The following CD-ROM type systems are supported at this + time: + + + + SCSI interface (also includes ProAudio Spectrum and + SoundBlaster SCSI) (&man.cd.4;) + + + + ATAPI IDE interface (&man.acd.4;) + + + + + + Ethernet Interfaces + + &hwlist.ae; + + &hwlist.age; + + &hwlist.ale; + + &hwlist.aue; + + &hwlist.axe; + + ASIX Electronics AX88178A/AX88179 USB Gigabit Ethernet + adapters (&man.axge.4; driver) + + &hwlist.bce; + + [&arch.amd64;, &arch.i386;] Broadcom BCM4401 based Fast + Ethernet adapters (&man.bfe.4; driver) + + &hwlist.bge; + + &hwlist.bnxt; + + &hwlist.bxe; + + &hwlist.cas; + + &hwlist.cdce; + + [&arch.amd64;, &arch.i386;] Crystal Semiconductor + CS89x0-based NICs (&man.cs.4; driver) + + &hwlist.cue; + + &hwlist.cxgb; + + &hwlist.cxgbe; + + &hwlist.dc; + + &hwlist.de; + + &hwlist.ed; + + &hwlist.em; + + &hwlist.ep; + + Agere ET1310 Gigabit Ethernet adapters + (&man.et.4; driver) + + &hwlist.ex; + + &hwlist.fe; + + &hwlist.fxp; + + &hwlist.gem; + + &hwlist.hme; + + &hwlist.ipheth; + + &hwlist.ixgb; + + &hwlist.ixgbe; + + &hwlist.ixl; + + &hwlist.jme; + + &hwlist.kue; + + &hwlist.lge; + + &hwlist.mlx4en; + + &hwlist.mlx5en; + + &hwlist.msk; + + &hwlist.mxge; + + &hwlist.my; + + &hwlist.nfe; + + &hwlist.nge; + + &hwlist.nxge; + + &hwlist.oce; + + &hwlist.pcn; + + &hwlist.qlxgb; + + &hwlist.qlxgbe; + + &hwlist.qlxge; + + &hwlist.re; + + &hwlist.rl; + + &hwlist.rue; + + &hwlist.sf; + + &hwlist.sfxge; + + &hwlist.sge; + + &hwlist.sis; + + &hwlist.sk; + + &hwlist.smsc; + + &hwlist.sn; + + &hwlist.ste; + + &hwlist.stge; + + &hwlist.ti; + + &hwlist.tl; + + [&arch.amd64;, &arch.i386;] SMC 83c17x + (EPIC)-based Ethernet NICs (&man.tx.4; driver) + + &hwlist.txp; + + &hwlist.udav; + + &hwlist.urndis; + + &hwlist.vge; + + &hwlist.vr; *** DIFF OUTPUT TRUNCATED AT 1000 LINES *** From owner-svn-doc-head@freebsd.org Thu Oct 5 19:01:55 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9B09FE3FC2B; Thu, 5 Oct 2017 19:01:55 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 75758821F2; Thu, 5 Oct 2017 19:01:55 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95J1sFr011206; Thu, 5 Oct 2017 19:01:54 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95J1sSL011202; Thu, 5 Oct 2017 19:01:54 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051901.v95J1sSL011202@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:01:54 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51048 - in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Commit-Revision: 51048 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:01:55 -0000 Author: gjb Date: Thu Oct 5 19:01:54 2017 New Revision: 51048 URL: https://svnweb.freebsd.org/changeset/doc/51048 Log: Add Makefiles for the new release documentation structure. This is not yet connected to the build. Sponsored by: The FreeBSD Foundation Added: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile (contents, props changed) head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile (contents, props changed) head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile (contents, props changed) head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile (contents, props changed) Added: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile Thu Oct 5 19:01:54 2017 (r51048) @@ -0,0 +1,28 @@ +# $FreeBSD$ + +.if exists(../Makefile.conf) +.include "../Makefile.conf" +.endif +.if exists(../Makefile.inc) +.include "../Makefile.inc" +.endif + +DOC_PREFIX?= ${.CURDIR}/../../../../.. +RELN_ROOT?= ${.CURDIR}/.. + +DOC?= errata +FORMATS?= html +INSTALL_COMPRESSED?= gz +INSTALL_ONLY_COMPRESSED= + +JADEFLAGS+= -V %generate-article-toc% + +SRCS?= errata.xml + +DATA+= ${DOC}.html + +install: ${DOC}.html + mkdir -p ${DOCINSTALLDIR} + ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} + +.include "${DOC_PREFIX}/share/mk/doc.project.mk" Added: head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile Thu Oct 5 19:01:54 2017 (r51048) @@ -0,0 +1,28 @@ +# $FreeBSD$ + +.if exists(../Makefile.conf) +.include "../Makefile.conf" +.endif +.if exists(../Makefile.inc) +.include "../Makefile.inc" +.endif + +DOC_PREFIX?= ${.CURDIR}/../../../../.. +RELN_ROOT?= ${.CURDIR}/.. + +JADEFLAGS+= -V %generate-article-toc% + +DOC?= hardware +FORMATS?= html +INSTALL_COMPRESSED?= gz +INSTALL_ONLY_COMPRESSED= + +SRCS?= hardware.xml + +DATA+= ${DOC}.html + +install: ${DOC}.html + mkdir -p ${DOCINSTALLDIR} + ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} + +.include "${DOC_PREFIX}/share/mk/doc.project.mk" Added: head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile Thu Oct 5 19:01:54 2017 (r51048) @@ -0,0 +1,28 @@ +# $FreeBSD$ + +.if exists(../Makefile.conf) +.include "../Makefile.conf" +.endif +.if exists(../Makefile.inc) +.include "../Makefile.inc" +.endif + +DOC_PREFIX?= ${.CURDIR}/../../../../.. +RELN_ROOT?= ${.CURDIR}/.. + +DOC= readme +FORMATS?= html +INSTALL_COMPRESSED?= gz +INSTALL_ONLY_COMPRESSED= + +JADEFLAGS+= -V %generate-article-toc% + +SRCS?= readme.xml + +DATA+= ${DOC}.html + +install: ${DOC}.html + mkdir -p ${DOCINSTALLDIR} + ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} + +.include "${DOC_PREFIX}/share/mk/doc.project.mk" Added: head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Thu Oct 5 19:01:54 2017 (r51048) @@ -0,0 +1,28 @@ +# $FreeBSD$ + +.if exists(../Makefile.conf) +.include "../Makefile.conf" +.endif +.if exists(../Makefile.inc) +.include "../Makefile.inc" +.endif + +DOC_PREFIX?= ${.CURDIR}/../../../../.. +RELN_ROOT?= ${.CURDIR}/.. + +DOC= relnotes +FORMATS?= html +INSTALL_COMPRESSED?= gz +INSTALL_ONLY_COMPRESSED= + +JADEFLAGS+= -V %generate-article-toc% + +SRCS?= relnotes.xml + +DATA+= ${DOC}.html + +install: ${DOC}.html + mkdir -p ${DOCINSTALLDIR} + ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} + +.include "${DOC_PREFIX}/share/mk/doc.project.mk" From owner-svn-doc-head@freebsd.org Thu Oct 5 19:06:32 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 74306E3FF38; Thu, 5 Oct 2017 19:06:32 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 432548276C; Thu, 5 Oct 2017 19:06:32 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95J6Vfq011727; Thu, 5 Oct 2017 19:06:31 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95J6VwZ011726; Thu, 5 Oct 2017 19:06:31 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051906.v95J6VwZ011726@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:06:31 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51049 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51049 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:06:32 -0000 Author: gjb Date: Thu Oct 5 19:06:31 2017 New Revision: 51049 URL: https://svnweb.freebsd.org/changeset/doc/51049 Log: Connect 12-CURRENT release notes and related documentation to the build. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:01:54 2017 (r51048) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:06:31 2017 (r51049) @@ -7,6 +7,8 @@ .include "../Makefile.inc" .endif +RELN_ROOT?= ${.CURDIR} + _OS?= FreeBSD _REVISION?= 12.0 _BRANCH?= RELEASE @@ -51,6 +53,64 @@ _ARM?= BANANAPI \ . for _A in ${_ARM} #DATA+= CHECKSUM.${CHECKSUM}-${THISRELEASE}-arm-armv6-${_A}.asc . endfor +.endfor + +_hardware?= hardware +.if !defined(MAN4DIR) || empty(MAN4DIR) +. if exists(${DOC_PREFIX}/../src/share/man/man4) +MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 +. elif exists(${DOC_PREFIX}/../share/man/man4) +MAN4DIR= ${DOC_PREFIX}/../share/man/man4 +. elfi exists(${DOC_PREFIX}/../man/man4) +MAN4DIR= ${DOC_PREFIX}/../man/man4 +. elif exists(${DOC_PREFIX}/../man4) +MAN4DIR= ${DOC_PREFIX}/../man4 +. else +. warning "MAN4DIR not found. Unable to build hardware.html" +_hardware= # empty +. endif +.endif + +D= errata +D+= ${_hardware} +D+= readme +D+= relnotes + +MAN4PAGES?= ${MAN4DIR}/*.4 ${MAN4DIR}/man4.*/*.4 +ARCHLIST?= ${.CURDIR}/../../share/misc/dev.archlist.txt +CLEANFILES+= dev-auto.ent + +MAN2HWNOTES_CMD=${.CURDIR}/../../share/misc/man2hwnotes.pl +.if defined(HWNOTES_MI) +MAN2HWNOTES_FLAGS= +.else +MAN2HWNOTES_FLAGS= -c +.endif + +dev-auto.ent: ${MAN4PAGES} ${ARCHLIST} ${MAN2HWNOTES_CMD} .PHONY + ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} + +.ORDER: all dev-auto.ent +.ORDER: all ${DOC}.html + +beforebuild: dev-auto.ent + +beforeclean: +.for _SD in ${D} + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} clean +.endfor + +beforeinstall: +.for _SD in ${D} +. if (${_SD:Mhardware} != "") + ${MAKE} -C ${.CURDIR} dev-auto.ent +. endif + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} all +.endfor + +afterinstall: +.for _SD in ${D} + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} install .endfor .include "${DOC_PREFIX}/share/mk/web.site.mk" From owner-svn-doc-head@freebsd.org Thu Oct 5 19:25:42 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 1362AE405B9; Thu, 5 Oct 2017 19:25:42 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id CDBCC83357; Thu, 5 Oct 2017 19:25:41 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95JPelE020219; Thu, 5 Oct 2017 19:25:40 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95JPes6020218; Thu, 5 Oct 2017 19:25:40 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051925.v95JPes6020218@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:25:40 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51050 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51050 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:25:42 -0000 Author: gjb Date: Thu Oct 5 19:25:40 2017 New Revision: 51050 URL: https://svnweb.freebsd.org/changeset/doc/51050 Log: Temporarily disconnect the 12.0R hardware.html page from the build. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:06:31 2017 (r51049) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:25:40 2017 (r51050) @@ -55,7 +55,8 @@ _ARM?= BANANAPI \ . endfor .endfor -_hardware?= hardware +#_hardware?= hardware +_hardware= # empty .if !defined(MAN4DIR) || empty(MAN4DIR) . if exists(${DOC_PREFIX}/../src/share/man/man4) MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 From owner-svn-doc-head@freebsd.org Thu Oct 5 19:28:10 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id D3760E4068C; Thu, 5 Oct 2017 19:28:10 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A055483540; Thu, 5 Oct 2017 19:28:10 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95JS97g020474; Thu, 5 Oct 2017 19:28:09 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95JS9na020473; Thu, 5 Oct 2017 19:28:09 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051928.v95JS9na020473@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:28:09 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51051 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51051 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:28:10 -0000 Author: gjb Date: Thu Oct 5 19:28:09 2017 New Revision: 51051 URL: https://svnweb.freebsd.org/changeset/doc/51051 Log: Set MAN4DIR to an empty value temporarily. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:25:40 2017 (r51050) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:28:09 2017 (r51051) @@ -57,6 +57,7 @@ _ARM?= BANANAPI \ #_hardware?= hardware _hardware= # empty +MAN4DIR= .if !defined(MAN4DIR) || empty(MAN4DIR) . if exists(${DOC_PREFIX}/../src/share/man/man4) MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 From owner-svn-doc-head@freebsd.org Thu Oct 5 19:44:03 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id D2515E40DBD; Thu, 5 Oct 2017 19:44:03 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9F9088410B; Thu, 5 Oct 2017 19:44:03 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95Ji2wk029005; Thu, 5 Oct 2017 19:44:02 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95Ji2hZ029004; Thu, 5 Oct 2017 19:44:02 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051944.v95Ji2hZ029004@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:44:02 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51052 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51052 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:44:04 -0000 Author: gjb Date: Thu Oct 5 19:44:02 2017 New Revision: 51052 URL: https://svnweb.freebsd.org/changeset/doc/51052 Log: Enable 'compat' (non-parallel) for the dev-auto.ent target. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:28:09 2017 (r51051) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:44:02 2017 (r51052) @@ -105,7 +105,7 @@ beforeclean: beforeinstall: .for _SD in ${D} . if (${_SD:Mhardware} != "") - ${MAKE} -C ${.CURDIR} dev-auto.ent + ${MAKE} -B -C ${.CURDIR} dev-auto.ent . endif ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} all .endfor From owner-svn-doc-head@freebsd.org Thu Oct 5 19:44:39 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 127A5E40E69; Thu, 5 Oct 2017 19:44:39 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D3A2884298; Thu, 5 Oct 2017 19:44:38 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95JicUA029217; Thu, 5 Oct 2017 19:44:38 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95JicoE029216; Thu, 5 Oct 2017 19:44:38 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051944.v95JicoE029216@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:44:38 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51053 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51053 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:44:39 -0000 Author: gjb Date: Thu Oct 5 19:44:37 2017 New Revision: 51053 URL: https://svnweb.freebsd.org/changeset/doc/51053 Log: Re-enable the hardware.html page build. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:44:02 2017 (r51052) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:44:37 2017 (r51053) @@ -55,9 +55,7 @@ _ARM?= BANANAPI \ . endfor .endfor -#_hardware?= hardware -_hardware= # empty -MAN4DIR= +_hardware?= hardware .if !defined(MAN4DIR) || empty(MAN4DIR) . if exists(${DOC_PREFIX}/../src/share/man/man4) MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 From owner-svn-doc-head@freebsd.org Thu Oct 5 19:57:40 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9F893E4133E; Thu, 5 Oct 2017 19:57:40 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 6E18384A4B; Thu, 5 Oct 2017 19:57:40 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95JvdTl033775; Thu, 5 Oct 2017 19:57:39 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95JvdOx033774; Thu, 5 Oct 2017 19:57:39 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710051957.v95JvdOx033774@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 19:57:39 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51054 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51054 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 19:57:40 -0000 Author: gjb Date: Thu Oct 5 19:57:39 2017 New Revision: 51054 URL: https://svnweb.freebsd.org/changeset/doc/51054 Log: Revert r51049, r51050, r51051, r51052, r51053, disconnecting the 12.0R release documentation from the build until I figure out what is different compared to my local environment that is causing the build to blow up. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:44:37 2017 (r51053) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:57:39 2017 (r51054) @@ -7,8 +7,6 @@ .include "../Makefile.inc" .endif -RELN_ROOT?= ${.CURDIR} - _OS?= FreeBSD _REVISION?= 12.0 _BRANCH?= RELEASE @@ -53,64 +51,6 @@ _ARM?= BANANAPI \ . for _A in ${_ARM} #DATA+= CHECKSUM.${CHECKSUM}-${THISRELEASE}-arm-armv6-${_A}.asc . endfor -.endfor - -_hardware?= hardware -.if !defined(MAN4DIR) || empty(MAN4DIR) -. if exists(${DOC_PREFIX}/../src/share/man/man4) -MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 -. elif exists(${DOC_PREFIX}/../share/man/man4) -MAN4DIR= ${DOC_PREFIX}/../share/man/man4 -. elfi exists(${DOC_PREFIX}/../man/man4) -MAN4DIR= ${DOC_PREFIX}/../man/man4 -. elif exists(${DOC_PREFIX}/../man4) -MAN4DIR= ${DOC_PREFIX}/../man4 -. else -. warning "MAN4DIR not found. Unable to build hardware.html" -_hardware= # empty -. endif -.endif - -D= errata -D+= ${_hardware} -D+= readme -D+= relnotes - -MAN4PAGES?= ${MAN4DIR}/*.4 ${MAN4DIR}/man4.*/*.4 -ARCHLIST?= ${.CURDIR}/../../share/misc/dev.archlist.txt -CLEANFILES+= dev-auto.ent - -MAN2HWNOTES_CMD=${.CURDIR}/../../share/misc/man2hwnotes.pl -.if defined(HWNOTES_MI) -MAN2HWNOTES_FLAGS= -.else -MAN2HWNOTES_FLAGS= -c -.endif - -dev-auto.ent: ${MAN4PAGES} ${ARCHLIST} ${MAN2HWNOTES_CMD} .PHONY - ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} - -.ORDER: all dev-auto.ent -.ORDER: all ${DOC}.html - -beforebuild: dev-auto.ent - -beforeclean: -.for _SD in ${D} - ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} clean -.endfor - -beforeinstall: -.for _SD in ${D} -. if (${_SD:Mhardware} != "") - ${MAKE} -B -C ${.CURDIR} dev-auto.ent -. endif - ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} all -.endfor - -afterinstall: -.for _SD in ${D} - ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} install .endfor .include "${DOC_PREFIX}/share/mk/web.site.mk" From owner-svn-doc-head@freebsd.org Thu Oct 5 20:07:59 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id CF8EEE4175C; Thu, 5 Oct 2017 20:07:59 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9C73484EC9; Thu, 5 Oct 2017 20:07:59 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95K7wON038022; Thu, 5 Oct 2017 20:07:58 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95K7wdI038021; Thu, 5 Oct 2017 20:07:58 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052007.v95K7wdI038021@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:07:58 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51055 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51055 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:07:59 -0000 Author: gjb Date: Thu Oct 5 20:07:58 2017 New Revision: 51055 URL: https://svnweb.freebsd.org/changeset/doc/51055 Log: Reapply r51054, with a few fixes. Fix a typo: s/elfi/elif/ Remove dependencies from the dev-auto.ent target, which seems I misread the original version of how this was invoked. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 19:57:39 2017 (r51054) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 20:07:58 2017 (r51055) @@ -7,6 +7,8 @@ .include "../Makefile.inc" .endif +RELN_ROOT?= ${.CURDIR} + _OS?= FreeBSD _REVISION?= 12.0 _BRANCH?= RELEASE @@ -51,6 +53,64 @@ _ARM?= BANANAPI \ . for _A in ${_ARM} #DATA+= CHECKSUM.${CHECKSUM}-${THISRELEASE}-arm-armv6-${_A}.asc . endfor +.endfor + +_hardware?= hardware +.if !defined(MAN4DIR) || empty(MAN4DIR) +. if exists(${DOC_PREFIX}/../src/share/man/man4) +MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 +. elif exists(${DOC_PREFIX}/../share/man/man4) +MAN4DIR= ${DOC_PREFIX}/../share/man/man4 +. elif exists(${DOC_PREFIX}/../man/man4) +MAN4DIR= ${DOC_PREFIX}/../man/man4 +. elif exists(${DOC_PREFIX}/../man4) +MAN4DIR= ${DOC_PREFIX}/../man4 +. else +. warning "MAN4DIR not found. Unable to build hardware.html" +_hardware= # empty +. endif +.endif + +D= errata +D+= ${_hardware} +D+= readme +D+= relnotes + +MAN4PAGES?= ${MAN4DIR}/*.4 ${MAN4DIR}/man4.*/*.4 +ARCHLIST?= ${.CURDIR}/../../share/misc/dev.archlist.txt +CLEANFILES+= dev-auto.ent + +MAN2HWNOTES_CMD=${.CURDIR}/../../share/misc/man2hwnotes.pl +.if defined(HWNOTES_MI) +MAN2HWNOTES_FLAGS= +.else +MAN2HWNOTES_FLAGS= -c +.endif + +dev-auto.ent: + ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} + +.ORDER: all dev-auto.ent +.ORDER: all ${DOC}.html + +beforebuild: dev-auto.ent + +beforeclean: +.for _SD in ${D} + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} clean +.endfor + +beforeinstall: +.for _SD in ${D} +. if (${_SD:Mhardware} != "") + ${MAKE} -B -C ${.CURDIR} dev-auto.ent +. endif + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} all +.endfor + +afterinstall: +.for _SD in ${D} + ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} install .endfor .include "${DOC_PREFIX}/share/mk/web.site.mk" From owner-svn-doc-head@freebsd.org Thu Oct 5 20:09:33 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B2D27E417F8; Thu, 5 Oct 2017 20:09:33 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7F0FC84F8D; Thu, 5 Oct 2017 20:09:33 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95K9Wha038121; Thu, 5 Oct 2017 20:09:32 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95K9WUj038120; Thu, 5 Oct 2017 20:09:32 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052009.v95K9WUj038120@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:09:32 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51056 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51056 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:09:33 -0000 Author: gjb Date: Thu Oct 5 20:09:32 2017 New Revision: 51056 URL: https://svnweb.freebsd.org/changeset/doc/51056 Log: Comment .ORDER lines, breaking the build. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 20:07:58 2017 (r51055) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 20:09:32 2017 (r51056) @@ -90,8 +90,8 @@ MAN2HWNOTES_FLAGS= -c dev-auto.ent: ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} -.ORDER: all dev-auto.ent -.ORDER: all ${DOC}.html +#.ORDER: all dev-auto.ent +#.ORDER: all ${DOC}.html beforebuild: dev-auto.ent From owner-svn-doc-head@freebsd.org Thu Oct 5 20:12:28 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 44DDBE419D2; Thu, 5 Oct 2017 20:12:28 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2610:1c1:1:6074::16:84]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "freefall.freebsd.org", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 238CA33D; Thu, 5 Oct 2017 20:12:28 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from FreeBSD.org (freefall.freebsd.org [IPv6:2610:1c1:1:6074::16:84]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by freefall.freebsd.org (Postfix) with ESMTPS id 1C13A16D04; Thu, 5 Oct 2017 20:12:27 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Date: Thu, 5 Oct 2017 20:12:25 +0000 From: Glen Barber To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: Re: svn commit: r51056 - head/en_US.ISO8859-1/htdocs/releases/12.0R Message-ID: <20171005201225.GH49395@FreeBSD.org> References: <201710052009.v95K9WUj038120@repo.freebsd.org> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="OgApRN/oydYDdnYz" Content-Disposition: inline In-Reply-To: <201710052009.v95K9WUj038120@repo.freebsd.org> User-Agent: Mutt/1.8.2 (2017-04-18) X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:12:28 -0000 --OgApRN/oydYDdnYz Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Oct 05, 2017 at 08:09:32PM +0000, Glen Barber wrote: > Author: gjb > Date: Thu Oct 5 20:09:32 2017 > New Revision: 51056 > URL: https://svnweb.freebsd.org/changeset/doc/51056 >=20 > Log: > Comment .ORDER lines, breaking the build. > =20 This now builds properly on build-web. Sorry for the noise. Glen --OgApRN/oydYDdnYz Content-Type: application/pgp-signature; name="signature.asc" -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEVVuz/A7vpH93hEhKuWzd6q+LXtAFAlnWkikACgkQuWzd6q+L XtDODg/+N84NEsnAIfMkwmfw4uVrNCajn2uXPOZgu6SzVt9FNnx99iIOrzrpnaQv QkQ0HWzFgmRUwB9pwCV50pxlGY+hBC3fv6cCN1P4ZyYLXsKdOlniZESgrgBKDpZY /ov/jgesInoR2HLBpzdRgBW6pDZhqgf9s4/OHNOhNYniwzZjWBH43ig8HwyQfcZn +Wnt5HaRLLNhAD2kXlZJ910tXeyRqw0nlE9leSx8JRiKLhO/A8XCdx7foutqKfnd kqrpM8ewawIH7EYv3oyKr6rynXFjpi6xLDhBKjXl3hbGWlbArgo/35n0SXiQSTY5 fxsaf8uVUYhtosZZn9oWpIaCVCnCVKmVfdpWHoOp7GqUMFt9JJXJ23s6Hho/6B8i FetnWQVpq83qPzv32+27jTv7BafGf/DZEYpwyJAtLFI74ZvfN4Z8UuI/85mFBQsF /MJr9oxte9ZTEl4M08Bj5tEkA7RO+U0I5R1w5CFzldSDHJk+R6KxMJQbXYwXYxBJ 99l0k4d4GTsv7kCbWnyWwok55B9aUJDfK3glR5h/Q/tYp0qrxjUEB+n9+P0y6yMX UtCl199YHqYB0nDW93wKghF99LUqstN9gqlDGWYuaz9jKM9wWeY4NILGuc+1/XDs P1icv893DGdJ4xvM807DR3w7+58kJTcUUGTsx/tbb1i857qWPdc= =+SVk -----END PGP SIGNATURE----- --OgApRN/oydYDdnYz-- From owner-svn-doc-head@freebsd.org Thu Oct 5 20:13:59 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 0E802E41A22; Thu, 5 Oct 2017 20:13:59 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id CD12675C; Thu, 5 Oct 2017 20:13:58 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95KDwcp042078; Thu, 5 Oct 2017 20:13:58 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95KDwSN042077; Thu, 5 Oct 2017 20:13:58 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052013.v95KDwSN042077@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:13:58 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51057 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51057 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:13:59 -0000 Author: gjb Date: Thu Oct 5 20:13:57 2017 New Revision: 51057 URL: https://svnweb.freebsd.org/changeset/doc/51057 Log: Make the relnotes.html, readme.html, and hardware.html URLs visible. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/index.xml Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/index.xml ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/index.xml Thu Oct 5 20:09:32 2017 (r51056) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/index.xml Thu Oct 5 20:13:57 2017 (r51057) @@ -31,6 +31,7 @@ &os; &local.rel;-RELEASE signed checksum files
+ ?> &os; &local.rel;-RELEASE hardware information
@@ -38,12 +39,15 @@ &os; &local.rel;-RELEASE release notes
+ &os; &local.rel;-RELEASE errata
+ ?> &os; &local.rel;-RELEASE readme
+ &os; Release Engineering TODO Page
?> From owner-svn-doc-head@freebsd.org Thu Oct 5 20:17:34 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 754BEE41A8D; Thu, 5 Oct 2017 20:17:34 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 4487F816; Thu, 5 Oct 2017 20:17:34 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95KHX4q042252; Thu, 5 Oct 2017 20:17:33 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95KHXIE042251; Thu, 5 Oct 2017 20:17:33 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052017.v95KHXIE042251@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:17:33 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51058 - head/share/tools X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/share/tools X-SVN-Commit-Revision: 51058 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:17:34 -0000 Author: gjb Date: Thu Oct 5 20:17:33 2017 New Revision: 51058 URL: https://svnweb.freebsd.org/changeset/doc/51058 Log: Enable update/checkout of src/share/man/man4 for the 12.0R hardware page. Sponsored by: The FreeBSD Foundation Modified: head/share/tools/webupdate Modified: head/share/tools/webupdate ============================================================================== --- head/share/tools/webupdate Thu Oct 5 20:13:57 2017 (r51057) +++ head/share/tools/webupdate Thu Oct 5 20:17:33 2017 (r51058) @@ -88,7 +88,7 @@ export NO_OBJ=YES # assumes that the directory right below that is the language code. # This works fine if all the languages are in a directory called # 'doc', and not at all if they aren't. -subtrees='head +subtrees='head src/share/man/man4 relnotes11/doc relnotes11/man4 relnotes10/doc relnotes10/man4 ports'; @@ -129,6 +129,8 @@ if [ $cond ]; then svn co $SVNROOT/doc/head head >> $LOGFILE 2>&1 || exit 2; test -d relnotes || mkdir relnotes; + mkdir -p src/share/man/man4 + svn co $SVNROOT/base/head/share/man/man4 src/share/man/man4 >> $LOGFILE 2>&1 || exit 2; svn co $SVNROOT/base/stable/11/release/doc relnotes11/doc >> $LOGFILE 2>&1 || exit 2; svn co $SVNROOT/base/stable/11/share/man/man4 relnotes11/man4 >> $LOGFILE 2>&1 || exit 2; svn co $SVNROOT/base/stable/10/release/doc relnotes10/doc >> $LOGFILE 2>&1 || exit 2; From owner-svn-doc-head@freebsd.org Thu Oct 5 20:20:07 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 40AA2E41AF7; Thu, 5 Oct 2017 20:20:07 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0DD408BC; Thu, 5 Oct 2017 20:20:06 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95KK6KE042404; Thu, 5 Oct 2017 20:20:06 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95KK6J1042403; Thu, 5 Oct 2017 20:20:06 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052020.v95KK6J1042403@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:20:06 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51059 - head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: head/en_US.ISO8859-1/htdocs/releases/12.0R X-SVN-Commit-Revision: 51059 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:20:07 -0000 Author: gjb Date: Thu Oct 5 20:20:05 2017 New Revision: 51059 URL: https://svnweb.freebsd.org/changeset/doc/51059 Log: Remove two stale .ORDER lines, and add a comment about what path is used for manual pages on the Project web builder. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 20:17:33 2017 (r51058) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Thu Oct 5 20:20:05 2017 (r51059) @@ -56,6 +56,8 @@ _ARM?= BANANAPI \ .endfor _hardware?= hardware + +# The path used on build-web is 'src/share/man/man4'. .if !defined(MAN4DIR) || empty(MAN4DIR) . if exists(${DOC_PREFIX}/../src/share/man/man4) MAN4DIR= ${DOC_PREFIX}/../src/share/man/man4 @@ -89,9 +91,6 @@ MAN2HWNOTES_FLAGS= -c dev-auto.ent: ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} - -#.ORDER: all dev-auto.ent -#.ORDER: all ${DOC}.html beforebuild: dev-auto.ent From owner-svn-doc-head@freebsd.org Thu Oct 5 20:32:28 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 151E5E41FBF; Thu, 5 Oct 2017 20:32:28 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E0504111D; Thu, 5 Oct 2017 20:32:27 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95KWQ83050269; Thu, 5 Oct 2017 20:32:26 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95KWQbI050265; Thu, 5 Oct 2017 20:32:26 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052032.v95KWQbI050265@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:32:26 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51060 - in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Commit-Revision: 51060 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:32:28 -0000 Author: gjb Date: Thu Oct 5 20:32:26 2017 New Revision: 51060 URL: https://svnweb.freebsd.org/changeset/doc/51060 Log: Add autogenerated files to CLEANFILES. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile Thu Oct 5 20:20:05 2017 (r51059) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile Thu Oct 5 20:32:26 2017 (r51060) @@ -21,6 +21,13 @@ SRCS?= errata.xml DATA+= ${DOC}.html +beforeclean: +CLEANFILES+= ${DOC}.html \ + ${DOC}.txt \ + catalog-cwd.xml \ + autogen.ent \ + ${DOC}.parsed.* + install: ${DOC}.html mkdir -p ${DOCINSTALLDIR} ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile Thu Oct 5 20:20:05 2017 (r51059) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile Thu Oct 5 20:32:26 2017 (r51060) @@ -21,6 +21,13 @@ SRCS?= hardware.xml DATA+= ${DOC}.html +beforeclean: +CLEANFILES+= ${DOC}.html \ + ${DOC}.txt \ + catalog-cwd.xml \ + autogen.ent \ + ${DOC}.parsed.* + install: ${DOC}.html mkdir -p ${DOCINSTALLDIR} ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile Thu Oct 5 20:20:05 2017 (r51059) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile Thu Oct 5 20:32:26 2017 (r51060) @@ -21,6 +21,13 @@ SRCS?= readme.xml DATA+= ${DOC}.html +beforeclean: +CLEANFILES+= ${DOC}.html \ + ${DOC}.txt \ + catalog-cwd.xml \ + autogen.ent \ + ${DOC}.parsed.* + install: ${DOC}.html mkdir -p ${DOCINSTALLDIR} ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Thu Oct 5 20:20:05 2017 (r51059) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Thu Oct 5 20:32:26 2017 (r51060) @@ -21,6 +21,13 @@ SRCS?= relnotes.xml DATA+= ${DOC}.html +beforeclean: +CLEANFILES+= ${DOC}.html \ + ${DOC}.txt \ + catalog-cwd.xml \ + autogen.ent \ + ${DOC}.parsed.* + install: ${DOC}.html mkdir -p ${DOCINSTALLDIR} ${INSTALL_DOCS} ${DATA} ${DOCINSTALLDIR} From owner-svn-doc-head@freebsd.org Thu Oct 5 20:33:02 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 0AB1BE41FED; Thu, 5 Oct 2017 20:33:02 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id B08A511B8; Thu, 5 Oct 2017 20:33:01 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95KX0jb050349; Thu, 5 Oct 2017 20:33:00 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95KX07m050348; Thu, 5 Oct 2017 20:33:00 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052033.v95KX07m050348@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 20:33:00 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51061 - in head/en_US.ISO8859-1/htdocs/share: examples mk X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: in head/en_US.ISO8859-1/htdocs/share: examples mk X-SVN-Commit-Revision: 51061 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 20:33:02 -0000 Author: gjb Date: Thu Oct 5 20:33:00 2017 New Revision: 51061 URL: https://svnweb.freebsd.org/changeset/doc/51061 Log: Remove unused files after migrating to the doc repository. Sponsored by: The FreeBSD Foundation Deleted: head/en_US.ISO8859-1/htdocs/share/examples/Makefile.relnotesng head/en_US.ISO8859-1/htdocs/share/mk/doc.relnotes.mk From owner-svn-doc-head@freebsd.org Thu Oct 5 21:13:45 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 0D98AE42D6C; Thu, 5 Oct 2017 21:13:45 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9BA2F2A43; Thu, 5 Oct 2017 21:13:44 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v95LDhRU067004; Thu, 5 Oct 2017 21:13:43 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v95LDhTM067000; Thu, 5 Oct 2017 21:13:43 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710052113.v95LDhTM067000@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Thu, 5 Oct 2017 21:13:43 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51062 - in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: in head/en_US.ISO8859-1/htdocs/releases/12.0R: errata hardware readme relnotes X-SVN-Commit-Revision: 51062 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Oct 2017 21:13:45 -0000 Author: gjb Date: Thu Oct 5 21:13:43 2017 New Revision: 51062 URL: https://svnweb.freebsd.org/changeset/doc/51062 Log: Line wrapping and indentation fixes to conform to FDP style guidelines. Copyrights got bumped as part of this commit, but these have not been translated in years. Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/errata.xml head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/hardware.xml head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/readme.xml head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/relnotes.xml Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/errata.xml ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/errata.xml Thu Oct 5 20:33:00 2017 (r51061) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/errata.xml Thu Oct 5 21:13:43 2017 (r51062) @@ -12,19 +12,21 @@ ]>

+ xmlns:xlink="http://www.w3.org/1999/xlink" + version="5.0"> - &os; &release; Errata + &os; &release; Errata - The &os; Project + + The &os; Project + $FreeBSD$ - 2015 - - The &os; Documentation Project + 2017 + The &os; Documentation + Project @@ -36,38 +38,37 @@ This document lists errata items for &os; &release;, - containing significant information discovered after the release - or too late in the release cycle to be otherwise included in the - release documentation. - This information includes security advisories, as well as news - relating to the software or documentation that could affect its - operation or usability. An up-to-date version of this document - should always be consulted before installing this version of + containing significant information discovered after the + release or too late in the release cycle to be otherwise + included in the release documentation. This information + includes security advisories, as well as news relating to the + software or documentation that could affect its operation or + usability. An up-to-date version of this document should + always be consulted before installing this version of &os;. - This errata document for &os; &release; - will be maintained until the release of &os; &release.next;. + This errata document for &os; &release; will be maintained + until the release of &os; &release.next;. Introduction - This errata document contains late-breaking news - about &os; &release; - Before installing this version, it is important to consult this - document to learn about any post-release discoveries or problems - that may already have been found and fixed. + This errata document contains late-breaking + news about &os; &release; Before installing this + version, it is important to consult this document to learn about + any post-release discoveries or problems that may already have + been found and fixed. Any version of this errata document actually distributed with the release (for example, on a CDROM distribution) will be out of date by definition, but other copies are kept updated on the Internet and should be consulted as the current - errata for this release. These other copies of the - errata are located at - , - plus any sites - which keep up-to-date mirrors of this location. + errata for this release. These other copies of the + errata are located at , plus any + sites which keep up-to-date mirrors of this location. Source and binary snapshots of &os; &release.branch; also contain up-to-date copies of this document (as of the time of Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/hardware.xml ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/hardware.xml Thu Oct 5 20:33:00 2017 (r51061) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/hardware.xml Thu Oct 5 21:13:43 2017 (r51062) @@ -13,14 +13,17 @@ %devauto; ]> -

- &os; &release.current; Hardware Notes - +

- The &os; Documentation Project + + &os; &release.current; Hardware Notes - $FreeBSD$ + + The &os; Documentation Project + + $FreeBSD$ 2000 2001 @@ -40,7 +43,8 @@ 2015 2016 2017 - The &os; Documentation Project + The &os; Documentation + Project @@ -119,8 +123,8 @@ - The single-core &intel; &xeon; - processors Nocona, Irwindale, + The single-core &intel; &xeon; processors + Nocona, Irwindale, Potomac, and Cranford have EM64T support. @@ -139,7 +143,8 @@ - All &intel; ¢rino; Duo and ¢rino; Pro platforms + All &intel; ¢rino; Duo and ¢rino; Pro + platforms @@ -149,11 +154,11 @@ - Some &intel; &pentium; 4s and &celeron; Ds using - the Prescott core have EM64T support. See - the Intel - Processor Spec Finder for the definitive answer about - EM64T support in Intel processors. + Some &intel; &pentium; 4s and &celeron; Ds using the + Prescott core have EM64T support. See the + Intel + Processor Spec Finder for the definitive answer + about EM64T support in Intel processors. @@ -171,21 +176,20 @@ &os;/&arch.i386;, in terms of drivers supported. Generally, drivers that already function correctly on other 64-bit platforms should work. - i386 &os;/&arch.i386; runs on a wide variety of IBM PC - compatible machines. Due to the wide range of + compatible machines. Due to the wide range of hardware available for this architecture, it is impossible to exhaustively list all combinations of equipment supported by &os;. Nevertheless, some general guidelines are presented here. Almost all &i386;-compatible processors with a floating - point unit are supported. All &intel; processors beginning + point unit are supported. All &intel; processors beginning with the 80486 are supported, including the 80486, &pentium;, &pentium; Pro, &pentium; II, &pentium; III, &pentium; 4, and variants thereof, such as the &xeon; and &celeron; processors. @@ -255,18 +259,20 @@ (DSDT) provided by each machine's BIOS. Some machines have bad or incomplete DSDTs, which prevents ACPI from functioning correctly. Replacement DSDTs for some machines can be found - at the DSDT - section of the ACPI4Linux project - Web site. &os; can use these DSDTs to override the DSDT - provided by the BIOS; see the &man.acpi.4; manual page for - more information. + at the DSDT + section of the ACPI4Linux + project Web site. &os; can use these DSDTs to override the + DSDT provided by the BIOS; see the &man.acpi.4; manual page + for more information. powerpc - All Apple PowerPC machines with built-in USB are supported, - as well a limited selection of non-Apple machines, + All Apple PowerPC machines with built-in USB are + supported, as well a limited selection of non-Apple machines, including KVM on POWER7 SMP is supported on all systems with more than @@ -277,8 +283,8 @@ sparc64 This section describes the systems currently known to be - supported by &os; on the Fujitsu &sparc64; and Sun &ultrasparc; - platforms. + supported by &os; on the Fujitsu &sparc64; and Sun + &ultrasparc; platforms. SMP is supported on all systems with more than 1 processor. @@ -286,10 +292,10 @@ When using the GENERIC kernel, &os;/&arch.sparc64; systems not equipped with a framebuffer supported by the &man.creator.4; (Sun Creator, Sun Creator3D - and Sun Elite3D) or &man.machfb.4; (Sun PGX and Sun PGX64 - as well as the ATI Mach64 chips found onboard in for example - &sun.blade; 100, &sun.blade; 150, &sun.ultra; 5 and &sun.ultra; 10) - driver must use the serial console. + and Sun Elite3D) or &man.machfb.4; (Sun PGX and Sun PGX64 as + well as the ATI Mach64 chips found onboard in for example + &sun.blade; 100, &sun.blade; 150, &sun.ultra; 5 and + &sun.ultra; 10) driver must use the serial console. If you have a system that is not listed here, it may not have been tested with &os; &release.current;. We encourage @@ -434,10 +440,11 @@ The following systems are partially supported by &os;. In - particular the fiber channel controllers in SBus-based systems are not - supported. However, it is possible to use these with a SCSI controller - supported by the &man.esp.4; driver (Sun ESP SCSI, Sun FAS Fast-SCSI - and Sun FAS366 Fast-Wide SCSI controllers). + particular the fiber channel controllers in SBus-based systems + are not supported. However, it is possible to use these with + a SCSI controller supported by the &man.esp.4; driver (Sun ESP + SCSI, Sun FAS Fast-SCSI and Sun FAS366 Fast-Wide SCSI + controllers). @@ -449,9 +456,9 @@ - Starting with 7.2-RELEASE, &arch.sparc64; systems based on Sun - &ultrasparc; III and beyond are also supported by &os;, which includes - the following known working systems: + Starting with 7.2-RELEASE, &arch.sparc64; systems based on + Sun &ultrasparc; III and beyond are also supported by &os;, + which includes the following known working systems: @@ -479,7 +486,8 @@ - &sun.fire; V215 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) + &sun.fire; V215 (support first appeared in 7.3-RELEASE + and 8.1-RELEASE) @@ -487,7 +495,8 @@ - &sun.fire; V245 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) + &sun.fire; V245 (support first appeared in 7.3-RELEASE + and 8.1-RELEASE) @@ -500,9 +509,10 @@ - &sun.fire; V480 (501-6780 and 501-6790 centerplanes only, for - which support first appeared in 7.3-RELEASE and 8.1-RELEASE, - other centerplanes might work beginning with 8.3-RELEASE and 9.0-RELEASE) + &sun.fire; V480 (501-6780 and 501-6790 centerplanes + only, for which support first appeared in 7.3-RELEASE and + 8.1-RELEASE, other centerplanes might work beginning with + 8.3-RELEASE and 9.0-RELEASE) @@ -510,8 +520,9 @@ - &sun.fire; V890 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, - non-mixed &ultrasparc; IV/IV+ CPU-configurations only) + &sun.fire; V890 (support first appeared in 7.4-RELEASE + and 8.1-RELEASE, non-mixed &ultrasparc; IV/IV+ + CPU-configurations only) @@ -528,14 +539,16 @@ - &sun.fire; V490 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, - non-mixed &ultrasparc; IV/IV+ CPU-configurations only) + &sun.fire; V490 (support first appeared in 7.4-RELEASE + and 8.1-RELEASE, non-mixed &ultrasparc; IV/IV+ + CPU-configurations only) - Starting with 7.4-RELEASE and 8.1-RELEASE, &arch.sparc64; systems based on - Fujitsu &sparc64; V are also supported by &os;, which - includes the following known working systems: + Starting with 7.4-RELEASE and 8.1-RELEASE, &arch.sparc64; + systems based on Fujitsu &sparc64; V are also supported by + &os;, which includes the following known working + systems: @@ -543,8 +556,8 @@ - The following Fujitsu &primepower; systems are not tested but - believed to be also supported by &os;: + The following Fujitsu &primepower; systems are not tested + but believed to be also supported by &os;: @@ -648,7 +661,7 @@ [&arch.amd64;, &arch.i386;] Booting from these - controllers is supported. EISA adapters are not + controllers is supported. EISA adapters are not supported. @@ -678,7 +691,7 @@ [&arch.amd64;, &arch.i386;] Booting from these - controllers is supported. EISA adapters are not + controllers is supported. EISA adapters are not supported. @@ -727,9 +740,9 @@ processor target devices and CD-ROM drives. WORM devices that support CD-ROM commands are supported for read-only access by the CD-ROM drivers (such as &man.cd.4;). WORM/CD-R/CD-RW - writing support is provided by &man.cdrecord.1;, which is a - part of the sysutils/cdrtools port in the Ports - Collection. + writing support is provided by &man.cdrecord.1;, which is + a part of the sysutils/cdrtools port in the + Ports Collection. The following CD-ROM type systems are supported at this time: @@ -939,8 +952,8 @@ 4965AGN IEEE 802.11n PCI network adapters (&man.iwn.4; driver) - [&arch.i386;, &arch.amd64;] Marvell Libertas IEEE 802.11b/g - PCI network adapters (&man.malo.4; driver) + [&arch.i386;, &arch.amd64;] Marvell Libertas IEEE + 802.11b/g PCI network adapters (&man.malo.4; driver) Marvell 88W8363 IEEE 802.11n wireless network adapters (&man.mwl.4; driver) @@ -1059,12 +1072,13 @@ - [&arch.amd64;, &arch.i386;] Avlab Technology, PCI IO 2S - and PCI IO 4S + [&arch.amd64;, &arch.i386;] Avlab Technology, PCI IO + 2S and PCI IO 4S - [&arch.amd64;, &arch.i386;] Comtrol RocketPort 550 + [&arch.amd64;, &arch.i386;] Comtrol RocketPort + 550 @@ -1134,7 +1148,7 @@ [&arch.amd64;, &arch.i386;] SIIG Cyber 4S PCI - 16C550/16C650/16C850 + 16C550/16C650/16C850 @@ -1258,8 +1272,9 @@ - [&arch.amd64;, &arch.i386;] - USB Bluetooth adapters can be found in Bluetooth section. + [&arch.amd64;, &arch.i386;] USB Bluetooth adapters can + be found in Bluetooth + section. &hwlist.ohci; @@ -1272,7 +1287,8 @@ [&arch.amd64;, &arch.i386;] Hubs - [&arch.amd64;, &arch.i386;] Keyboards (&man.ukbd.4; driver) + [&arch.amd64;, &arch.i386;] Keyboards (&man.ukbd.4; + driver) [&arch.amd64;, &arch.i386;] Miscellaneous @@ -1302,7 +1318,8 @@ &hwlist.umodem; - [&arch.amd64;, &arch.i386;] Mice (&man.ums.4; driver) + [&arch.amd64;, &arch.i386;] Mice (&man.ums.4; + driver) &hwlist.ulpt; @@ -1376,7 +1393,8 @@ Information regarding specific video cards and compatibility with Xorg can be - found at http://www.x.org/. + found at http://www.x.org/. [&arch.amd64;, &arch.i386;] Keyboards including: @@ -1426,7 +1444,8 @@ &man.moused.8; has more information on using pointing devices with &os;. Information on using pointing devices - with Xorg can be found at http://www.x.org/. + with Xorg can be found at http://www.x.org/. [&arch.amd64;, &arch.i386;] PC standard @@ -1452,9 +1471,9 @@ [&arch.i386;] Xilinx XC6200-based reconfigurable hardware - cards compatible with the HOT1 from Virtual Computers (xrpu - driver). - + cards compatible with the HOT1 from Virtual Computers + (xrpu driver).

Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/readme.xml ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/readme.xml Thu Oct 5 20:33:00 2017 (r51061) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/readme.xml Thu Oct 5 21:13:43 2017 (r51062) @@ -4,7 +4,7 @@ %release; ]> - -

- &os; &release.current; README - +

- The &os; Project + + &os; &release.current; README + + The &os; Project + + $FreeBSD$ @@ -37,7 +41,10 @@ 2013 2014 2015 - The &os; Documentation Project + 2016 + 2017 + The &os; Documentation + Project @@ -48,29 +55,30 @@ &tm-attrib.general; - - This document gives a brief introduction to &os; - &release.current;. It includes some information on how to - obtain &os;, a listing of various ways to contact the &os; - Project, and pointers to some other sources of - information. - + + This document gives a brief introduction to &os; + &release.current;. It includes some information on how to + obtain &os;, a listing of various ways to contact the &os; + Project, and pointers to some other sources of + information. + Introduction - This distribution is a &release.type; of &os; &release.current;, the - latest point along the &release.branch; branch. + This distribution is a &release.type; of &os; + &release.current;, the latest point along the &release.branch; + branch. About &os; &os; is an operating system based on 4.4 BSD Lite for - AMD64 and Intel EM64T based PC hardware (&arch.amd64;), - Intel, AMD, Cyrix or NexGen x86 based PC hardware (&arch.i386;), - and &ultrasparc; machines (&arch.sparc64;). Versions - for the &arm; (&arch.arm;), &mips; (&arch.mips;), and + AMD64 and Intel EM64T based PC hardware (&arch.amd64;), Intel, + AMD, Cyrix or NexGen x86 based PC hardware + (&arch.i386;), and &ultrasparc; machines (&arch.sparc64;). + Versions for the &arm; (&arch.arm;), &mips; (&arch.mips;), and &powerpc; (&arch.powerpc;) architectures are currently under development as well. &os; works with a wide variety of peripherals and configurations and can be used for everything @@ -87,61 +95,63 @@ A large collection of third-party ported software (the Ports Collection) is also provided to make it - easy to obtain and install all your favorite traditional &unix; - utilities for &os;. Each port consists of a - set of scripts to retrieve, configure, build, and install a - piece of software, with a single command. Over &os.numports; - ports, from editors to programming languages to graphical - applications, make &os; a powerful and comprehensive operating - environment that extends far beyond what's provided by many - commercial versions of &unix;. Most ports are also available as - pre-compiled packages, which can be quickly - installed from the installation program. + easy to obtain and install all your favorite traditional + &unix; utilities for &os;. Each port consists + of a set of scripts to retrieve, configure, build, and install + a piece of software, with a single command. Over + &os.numports; ports, from editors to programming languages to + graphical applications, make &os; a powerful and comprehensive + operating environment that extends far beyond what's provided + by many commercial versions of &unix;. Most ports are also + available as pre-compiled packages, which can + be quickly installed from the installation program. Target Audience - This &release.type; is aimed primarily at early adopters - and various other users who want to get involved with the - ongoing development of &os;. While the &os; development team - tries its best to ensure that each &release.type; works as - advertised, &release.branch; is very much a - work-in-progress. + This &release.type; is aimed + primarily at early adopters and various other users who want + to get involved with the ongoing development of &os;. While + the &os; development team tries its best to ensure that each + &release.type; works as advertised, &release.branch; is very + much a work-in-progress. - The basic requirements for using this &release.type; are - technical proficiency with &os; and an understanding of the - ongoing development process of &os; &release.branch; (as - discussed on the &a.current;). + The basic requirements for using + this &release.type; are technical proficiency with &os; and an + understanding of the ongoing development process of &os; + &release.branch; (as discussed on the &a.current;). - For those more interested in doing business with &os; than - in experimenting with new &os; technology, formal releases - (such as &release.prev.stable;) are frequently more appropriate. - Releases undergo a period of testing and quality assurance - checking to ensure high reliability and dependability. + For those more interested in doing + business with &os; than in experimenting with new &os; + technology, formal releases (such as &release.prev.stable;) + are frequently more appropriate. Releases undergo a period of + testing and quality assurance checking to ensure high + reliability and dependability. - This &release.type; is aimed primarily at early adopters - and various other users who want to get involved with the - ongoing development of &os;. While the &os; development team - tries its best to ensure that each &release.type; works as - advertised, &release.branch; is very much a - work-in-progress. + This &release.type; is aimed + primarily at early adopters and various other users who want + to get involved with the ongoing development of &os;. While + the &os; development team tries its best to ensure that each + &release.type; works as advertised, &release.branch; is very + much a work-in-progress. - The basic requirements for using this &release.type; are - technical proficiency with &os; and an understanding of the - ongoing development process of &os; &release.branch; (as - discussed on the &a.current;). + The basic requirements for using + this &release.type; are technical proficiency with &os; and an + understanding of the ongoing development process of &os; + &release.branch; (as discussed on the &a.current;). - For those more interested in doing business with &os; than - in experimenting with new &os; technology, formal releases - (such as &release.prev.stable;) are frequently more appropriate. - Releases undergo a period of testing and quality assurance - checking to ensure high reliability and dependability. + For those more interested in doing + business with &os; than in experimenting with new &os; + technology, formal releases (such as &release.prev.stable;) + are frequently more appropriate. Releases undergo a period of + testing and quality assurance checking to ensure high + reliability and dependability. - This &release.type; of &os; is suitable for all users. It - has undergone a period of testing and quality assurance - checking to ensure the highest reliability and - dependability. + This &release.type; of &os; is + suitable for all users. It has undergone a period of testing + and quality assurance checking to ensure the highest + reliability and dependability. @@ -165,16 +175,18 @@ Collection, or other extra material. A list of the CDROM and DVD publishers known to the - project are listed in the Obtaining - &os; appendix to the Handbook. + project are listed in the Obtaining + &os; appendix to the Handbook. FTP You can use FTP to retrieve &os; and any or all of its - optional packages from ftp://ftp.FreeBSD.org/, which is the official - &os; release site, or any of its + optional packages from ftp://ftp.FreeBSD.org/, + which is the official &os; release site, or any of its mirrors. Lists of locations that mirror &os; can be found in the @@ -186,8 +198,9 @@ Additional mirror sites are always welcome. Contact freebsd-admin@FreeBSD.org for more details on becoming an official mirror site. You can also find useful - information for mirror sites at the Mirroring - &os; article. + information for mirror sites at the Mirroring &os; + article. Mirrors generally contain the ISO images generally used to create a CDROM of a &os; release. They usually also contain @@ -207,16 +220,18 @@ For any questions or general technical support issues, please send mail to the &a.questions;. - If you're tracking the &release.branch; development efforts, you - must join the &a.current;, in order to - keep abreast of recent developments and changes that may - affect the way you use and maintain the system. + If you're tracking the &release.branch; development + efforts, you must join the &a.current;, + in order to keep abreast of recent developments and changes + that may affect the way you use and maintain the + system. - Being a largely-volunteer effort, the &os; - Project is always happy to have extra hands willing to help—there are already far more desired enhancements than - there is time to implement them. To contact the developers on - technical matters, or with offers of help, please send mail to - the &a.hackers;. + Being a largely-volunteer effort, the &os; Project is + always happy to have extra hands willing to help—there + are already far more desired enhancements than there is time + to implement them. To contact the developers on technical + matters, or with offers of help, please send mail to the + &a.hackers;. Please note that these mailing lists can experience significant amounts of traffic. If you @@ -225,13 +240,15 @@ preferable to subscribe instead to the &a.announce;. All of the mailing lists can be freely joined by anyone - wishing to do so. Visit the - &os; Mailman Info Page. This will give you more - information on joining the various lists, accessing archives, - etc. There are a number of mailing lists targeted at special - interest groups not mentioned here; more information can be - obtained either from the Mailman pages or the mailing - lists section of the &os; Web site. + wishing to do so. Visit the &os; Mailman Info + Page. This will give you more information on joining + the various lists, accessing archives, etc. There are + a number of mailing lists targeted at special interest groups + not mentioned here; more information can be obtained either + from the Mailman pages or the mailing + lists section of the &os; Web site. Do not send email to the lists @@ -285,48 +302,46 @@ provided in various formats. Most distributions will include both ASCII text (.TXT) and HTML (.HTM) renditions. Some distributions - may also include other formats such as Portable Document Format - (.PDF). + may also include other formats such as Portable Document + Format (.PDF). - - - README.TXT: This file, which - gives some general information about &os; as well as - some cursory notes about obtaining a - distribution. - + + + README.TXT: This file, which + gives some general information about &os; as well as some + cursory notes about obtaining a distribution. + - - RELNOTES.TXT: The release - notes, showing what's new and different in &os; - &release.current; compared to the previous release (&os; - &release.prev;). - + + RELNOTES.TXT: The release notes, + showing what's new and different in &os; &release.current; + compared to the previous release (&os; + &release.prev;). + - - HARDWARE.TXT: The hardware - compatibility list, showing devices with which &os; has - been tested and is known to work. - + + HARDWARE.TXT: The hardware + compatibility list, showing devices with which &os; has + been tested and is known to work. + - - ERRATA.TXT: Release errata. - Late-breaking, post-release information can be found in - this file, which is principally applicable to releases - (as opposed to snapshots). It is important to consult - this file before installing a release of &os;, as it - contains the latest information on problems which have - been found and fixed since the release was - created. - - - + + ERRATA.TXT: Release errata. + Late-breaking, post-release information can be found in + this file, which is principally applicable to releases (as + opposed to snapshots). It is important to consult this + file before installing a release of &os;, as it contains + the latest information on problems which have been found + and fixed since the release was created. + + On platforms that support &man.bsdinstall.8; (currently - &arch.amd64;, &arch.i386;, and &arch.sparc64;), these documents are generally available via the - Documentation menu during installation. Once the system is - installed, you can revisit this menu by re-running the - &man.bsdinstall.8; utility. + &arch.amd64;, &arch.i386;, and &arch.sparc64;), these + documents are generally available via the Documentation menu + during installation. Once the system is installed, you can + revisit this menu by re-running the &man.bsdinstall.8; + utility. It is extremely important to read the errata for any @@ -337,8 +352,9 @@ other copies are kept updated on the Internet and should be consulted as the current errata for this release. These other copies of the errata are located at - &url.base;/releases/ (as - well as any sites which keep up-to-date mirrors of this + &url.base;/releases/ + (as well as any sites which keep up-to-date mirrors of this location). @@ -346,50 +362,54 @@ Manual Pages - As with almost all &unix; like operating systems, &os; comes - with a set of on-line manual pages, accessed through the - &man.man.1; command or through the hypertext manual - pages gateway on the &os; Web site. In general, the - manual pages provide information on the different commands and - APIs available to the &os; user. + As with almost all &unix; like operating systems, &os; + comes with a set of on-line manual pages, accessed through the + &man.man.1; command or through the hypertext + manual pages gateway on the &os; Web site. In + general, the manual pages provide information on the different + commands and APIs available to the &os; user. In some cases, manual pages are written to give information on particular topics. Notable examples of such - manual pages are &man.tuning.7; (a guide to performance tuning), - &man.security.7; (an introduction to &os; security), and - &man.style.9; (a style guide to kernel coding). + manual pages are &man.tuning.7; (a guide to performance + tuning), &man.security.7; (an introduction to &os; security), + and &man.style.9; (a style guide to kernel coding). Books and Articles Two highly-useful collections of &os;-related information, - maintained by the &os; Project, - are the &os; Handbook and &os; FAQ (Frequently Asked - Questions document). On-line versions of the Handbook - and FAQ - are always available from the &os; Documentation - page or its mirrors. If you install the + maintained by the &os; Project, are the &os; Handbook and &os; + FAQ (Frequently Asked Questions document). On-line versions + of the Handbook and FAQ are always + available from the &os; Documentation + page or its mirrors. If you install the doc distribution set, you can use a Web browser to read the Handbook and FAQ locally. In particular, note that the Handbook contains a step-by-step guide to installing &os;. A number of on-line books and articles, also maintained by - the &os; Project, cover more-specialized, &os;-related topics. - This material spans a wide range of topics, from effective use - of the mailing lists, to dual-booting &os; with other - operating systems, to guidelines for new committers. Like the - Handbook and FAQ, these documents are available from the &os; - Documentation Page or in the doc - distribution set. + the &os; Project, cover more-specialized, &os;-related topics. + This material spans a wide range of topics, from effective use + of the mailing lists, to dual-booting &os; with other + operating systems, to guidelines for new committers. Like the + Handbook and FAQ, these documents are available from the &os; + Documentation Page or in the doc + distribution set. A listing of other books and documents about &os; can be - found in the bibliography - of the &os; Handbook. Because of &os;'s strong &unix; heritage, - many other articles and books written for &unix; systems are - applicable as well, some of which are also listed in the - bibliography. + found in the bibliography + of the &os; Handbook. Because of &os;'s strong &unix; + heritage, many other articles and books written for &unix; + systems are applicable as well, some of which are also listed + in the bibliography. @@ -398,10 +418,11 @@ &os; represents the cumulative work of many hundreds, if not thousands, of individuals from around the world who have worked - countless hours to bring about this &release.type;. For a - complete list of &os; developers and contributors, please see - Contributors - to &os; on the &os; Web site or any of its + countless hours to bring about this &release.type;. For + a complete list of &os; developers and contributors, please see + Contributors + to &os; on the &os; Web site or any of its mirrors. Special thanks also go to the many thousands of &os; users Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/relnotes.xml ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/relnotes.xml Thu Oct 5 20:33:00 2017 (r51061) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/relnotes.xml Thu Oct 5 21:13:43 2017 (r51062) @@ -25,7 +25,7 @@ - 2016 + 2017 The &os; Documentation Project From owner-svn-doc-head@freebsd.org Fri Oct 6 09:15:39 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 60198E318E1; Fri, 6 Oct 2017 09:15:39 +0000 (UTC) (envelope-from wschnr@googlemail.com) Received: from mail-qt0-x22d.google.com (mail-qt0-x22d.google.com [IPv6:2607:f8b0:400d:c0d::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 22CF87696A; Fri, 6 Oct 2017 09:15:39 +0000 (UTC) (envelope-from wschnr@googlemail.com) Received: by mail-qt0-x22d.google.com with SMTP id k1so19237930qti.2; Fri, 06 Oct 2017 02:15:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=mime-version:sender:in-reply-to:references:from:date:message-id :subject:to:cc; bh=f4AmspJRmhBbOEVzURLJMvqmA4IXwRe3OsbnwEKnl3Y=; b=RiNA0jaccJUmybdjm2HpP4TXzPNeu8fLPPHmfCIgLceBuC/+huV220kMv/MFSg/x/F 605vuKjhAG8cbOq/TUqZO8N3RWe0biHfKPNvAg4uk2H6jInO1xP6phS/lVQLMUPjqQ8X PIuSAVKVav/Ti0625md9troW3e/MAL4Whw3hvqp7P+eW2wmUzuA1sOgGG6NI1yiHnbX/ oxWz8cFk4CNkide1ALK0WccJBNJ0J6CykoPzYd5y7JjlKn6W5gYQM5oOfTTFqADT+kpZ TMHnNtAbwg42xB4ePrOIlqxVE4tsJT6SCJSmrFOaEuFmgF8XCuuETLPlRSCcvCEoGLUB a8ag== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:sender:in-reply-to:references:from :date:message-id:subject:to:cc; bh=f4AmspJRmhBbOEVzURLJMvqmA4IXwRe3OsbnwEKnl3Y=; b=j//Pfy9B1Y7ZTANYiUToF/G7RRe6ILoqyMGnrSLWFPk/P+fUHHvmMum8VBWKY8OokJ AmyvJOZJqB0kFXAXmeAJveRtk2lcodfjw3DeFNBWRFSTIiMPMiuMPPCd3N5supUMbAab EhrFKMGQuRvKG1m1q9v4wGtkceO2OOTexwPUFR8p4+bs3I3FHoMA/QNMAMrdAN43IAKv nfoyeVlxwVJeDjlm4JDpXiaUB7ZmUuAfKK4Q8ee9b5ZartSF5CP6BMfccfH6flwH+Kvh uqHGi0wziqaX66gXQOoTEv6wNmU+RLRmhL0MYkuWQ5bIa7n+k5sg5nw+v0c7tfBH4a+f L4uw== X-Gm-Message-State: AMCzsaXlw84k32IrbRW7jyxdgToyhcqJWEG3Ya9c05H2xSLWL4radOVI otqLgfe1lEdNBkOeIcQ+ismJm1AwnJHKUtZePTor9g== X-Google-Smtp-Source: AOwi7QDPLYMoA8L7juJS88ZIpy0j3JCznBtvtTJilY8rxJNuRgtt2THY6SnkeOjWV1buq1NYnKIjoei8iwlxVSxaUpo= X-Received: by 10.37.232.14 with SMTP id k14mr1068325ybd.230.1507281337977; Fri, 06 Oct 2017 02:15:37 -0700 (PDT) MIME-Version: 1.0 Sender: wschnr@googlemail.com Received: by 10.37.74.67 with HTTP; Fri, 6 Oct 2017 02:15:22 -0700 (PDT) In-Reply-To: <20171005201225.GH49395@FreeBSD.org> References: <201710052009.v95K9WUj038120@repo.freebsd.org> <20171005201225.GH49395@FreeBSD.org> From: Wolfram Schneider Date: Fri, 6 Oct 2017 11:15:22 +0200 X-Google-Sender-Auth: nI0qWBdqQE1Jp3a0Kwe1PQbpj-U Message-ID: Subject: Re: svn commit: r51056 - head/en_US.ISO8859-1/htdocs/releases/12.0R To: Glen Barber Cc: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Content-Type: text/plain; charset="UTF-8" X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 09:15:39 -0000 On 5 October 2017 at 22:12, Glen Barber wrote: > On Thu, Oct 05, 2017 at 08:09:32PM +0000, Glen Barber wrote: >> Author: gjb >> Date: Thu Oct 5 20:09:32 2017 >> New Revision: 51056 >> URL: https://svnweb.freebsd.org/changeset/doc/51056 >> >> Log: >> Comment .ORDER lines, breaking the build. >> > > This now builds properly on build-web. Sorry for the noise. The build still fails for me: $ cd en_US.ISO8859-1/htdocs/releases/12.0R/ $ make clean && make all make: "/home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile" line 71: warning: "MAN4DIR not found. Unable to build hardware.html" /bin/rm -f Errs errs mklog index.html schedule.html dev-auto.ent /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/autogen.ent /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml.sort /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml.sort.tmp make: "/home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile" line 71: warning: "MAN4DIR not found. Unable to build hardware.html" install /home/wosch/doc-svn/share/xml/catalog-cwd.xml /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml echo '' >> /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/autogen.ent env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml file:///home/wosch/doc-svn/share/xml/catalog.xml file:///usr/local/share/xml/catalog" /usr/local/bin/xmllint --xinclude --valid --noout --nonet index.xml env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml file:///home/wosch/doc-svn/share/xml/catalog.xml file:///usr/local/share/xml/catalog" /usr/local/bin/xsltproc --xinclude --nonet --maxvars 20000 --debug -o index.html http://www.FreeBSD.org/XML/share/xml/xhtml.xsl index.xml env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml file:///home/wosch/doc-svn/share/xml/catalog.xml file:///usr/local/share/xml/catalog" /usr/local/bin/xmllint --xinclude --valid --noout --nonet schedule.xml env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml file:///home/wosch/doc-svn/share/xml/catalog.xml file:///usr/local/share/xml/catalog" /usr/local/bin/xsltproc --xinclude --nonet --maxvars 20000 --debug -o schedule.html http://www.FreeBSD.org/XML/share/xml/xhtml.xsl schedule.xml /usr/local/bin/perl /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/../../share/misc/man2hwnotes.pl -c -a /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/../../share/misc/dev.archlist.txt -o dev-auto.ent /*.4 /man4.*/*.4 No such file or directory: Could not open /*.4 in 160. *** Error code 2 Stop. make: stopped in /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R -Wolfram -- Wolfram Schneider https://wolfram.schneider.org From owner-svn-doc-head@freebsd.org Fri Oct 6 09:32:01 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3723AE31CDA; Fri, 6 Oct 2017 09:32:01 +0000 (UTC) (envelope-from ryusuke@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E0FC97703A; Fri, 6 Oct 2017 09:32:00 +0000 (UTC) (envelope-from ryusuke@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v969W0AI073128; Fri, 6 Oct 2017 09:32:00 GMT (envelope-from ryusuke@FreeBSD.org) Received: (from ryusuke@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v969W0W1073126; Fri, 6 Oct 2017 09:32:00 GMT (envelope-from ryusuke@FreeBSD.org) Message-Id: <201710060932.v969W0W1073126@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: ryusuke set sender to ryusuke@FreeBSD.org using -f From: Ryusuke SUZUKI Date: Fri, 6 Oct 2017 09:32:00 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51063 - head/ja_JP.eucJP/books/handbook/security X-SVN-Group: doc-head X-SVN-Commit-Author: ryusuke X-SVN-Commit-Paths: head/ja_JP.eucJP/books/handbook/security X-SVN-Commit-Revision: 51063 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 09:32:01 -0000 Author: ryusuke Date: Fri Oct 6 09:31:59 2017 New Revision: 51063 URL: https://svnweb.freebsd.org/changeset/doc/51063 Log: - Merge the following from the English version: r25140 -> r28158 head/ja_JP.eucJP/books/handbook/security/chapter.xml Modified: head/ja_JP.eucJP/books/handbook/security/chapter.xml Modified: head/ja_JP.eucJP/books/handbook/security/chapter.xml ============================================================================== --- head/ja_JP.eucJP/books/handbook/security/chapter.xml Thu Oct 5 21:13:43 2017 (r51062) +++ head/ja_JP.eucJP/books/handbook/security/chapter.xml Fri Oct 6 09:31:59 2017 (r51063) @@ -3,7 +3,7 @@ The FreeBSD Documentation Project The FreeBSD Japanese Documentation Project - Original revision: r25140 + Original revision: r28158 $FreeBSD$ --> @@ -64,7 +64,7 @@ - &os; 5.0 以降のリリースにおける、 + &os; における Kerberos5 の設定方法 @@ -949,8 +949,6 @@ なポートをブロックから除外するのはもちろんですが) 4000 より下のすべてのポートをブロックするという設定が考えられます。 - ICMP_BANDLIM - また別のよくあるサービス妨害攻撃として、踏み台攻撃 (springboard attack) と呼ばれるものがあります — これは、あるサーバを攻撃し、そこ結果として生成される応答が自分自身、ロー @@ -973,10 +971,12 @@ まうようにすることができます。mbuf を消費し尽くさせることにより、この種の攻撃でサーバをクラッシュさせることも可能です。サーバが生成した ICMP 応答を十分速く送信できない場合、とくにひどい - ことになります。&os; カーネルには、この種の攻撃の効果を抑制する - - と呼ばれる新しいカーネルコンパイルオプション - があります。踏み台攻撃の 3 つめの主要なクラスに属する攻撃は、 + ことになります。 + この種の攻撃の効果を抑制するには、 + sysctl 変数の + net.inet.icmp.icmplim + を使ってください。 + 踏み台攻撃の 3 つめの主要なクラスに属する攻撃は、 udp echo サービスのような、特定の inetd 内部サービスに関連するものです。攻撃者は、単に送信元アドレスがサーバ A の echo ポー @@ -1129,11 +1129,7 @@ 暗号化機構を理解する - &os; 4.4 の前までは、libcrypt.a - は暗号化に使われるライブラリへのシンボリックリンクでした。 - &os; 4.4 で libcrypt.a - は設定可能なパスワード認証ハッシュライブラリを提供するようになりました。 - 現在のところ、このライブラリは DES, MD5 および Blowfish + 現在では、ライブラリは DES, MD5 および Blowfish ハッシュ関数に対応しています。デフォルトでは、&os; はパスワードの暗号化に MD5 を利用します。 @@ -1173,31 +1169,22 @@ ワンタイムパスワード - S/Key は一方向ハッシュ関数を基にしたワンタイムパスワード方式 - です。&os; では、互換性のために MD4 ハッシュを用いていますが - 他のシステムでは MD5 や DES-MAC を用いてます。S/Key は、バージョ - ン1.1.5 以降のすべての &os; に含まれていますし、&os; 以外 - の数多くのシステムの上でも利用されています。S/Key は Bell - Communications Research, Inc. の登録商標です。 + デフォルトで、&os; は + OPIE (One-time Passwords In Everything) に対応しています。 + OPIE はデフォルトでは MD5 ハッシュを使用します。 - &os; バージョン 5.0 以降では、S/Key - は機能的に同等な OPIE (One-time Passwords In Everything) - で置き換えられました。OPIE はデフォルトでは - MD5 ハッシュを使用します。 - ここでは、三種類の異なる「パスワード」について説明します。まず一つ目は、あなたが普段使っている普通の &unix; スタイルの、もしくは Kerberos のパスワードです。ここではこれを - &unix; パスワードと呼ぶことにします。二つ目は、S/Key - の key プログラム、または - OPIE の &man.opiekey.1; プログラムによって生成され、 - keyinit または &man.opiepasswd.1; + &unix; パスワードと呼ぶことにします。 + 二つ目は、OPIE の &man.opiekey.1; プログラムによって生成され、 + &man.opiepasswd.1; プログラムとログインプロンプトが受け付けるパスワードです。ここではこれをワンタイムパスワードと呼ぶことにします。三つ目のパスワードは、 - key/opiekey (と場合により - keyinit/opiepasswd) + opiekey (と場合により + opiepasswd) プログラムに対してユーザが入力する秘密のパスワードで、ワンタイムパスワードを生成するのに使われます。ここではこれを秘密のパスフレーズもしくは単に @@ -1214,24 +1201,24 @@ パスワードは長さが 8 文字に制限されていました &os; では、標準のログインパスワードは、128 文字までとなります。。 - これに対し、S/Key や OPIE + これに対し、OPIE では秘密のパスフレーズを好きなだけ長くすることができます (訳注: 実装上、key コマンドなどのバッファ長で制限されてしまう可能性があります。200 文字程度に押えておいた方がよいでしょう :-)。 6 語から 7 語からなるパスフレーズがふつうです。ほとんどの部分で、 - S/Key や OPIE システムは Unix + OPIE システムは &unix; のパスワードシステムと完全に独立して動作するようになっています。 - パスフレーズに加え、S/Key や OPIE + パスフレーズに加え、OPIE システムにとって重要な 2 種類のデータがあります。一つはシード (seed: 種) またはキー (key: 鍵) と呼ばれるもので、2 つの文字と 5 つの数字で構成されます。もう一つはシーケンス番号 (iteration - count) で、1 から 100 までの整数です。S/Key はここまで + count) で、1 から 100 までの整数です。OPIE はここまでに述べたデータを利用してワンタイムパスワードを生成します。その方法は、まずシードと秘密のパスフレーズを連結し、それに対してシーケ - ンス番号の回数だけ MD4/MD5 ハッシュを繰り返し計算します。 + ンス番号の回数だけ MD5 ハッシュを繰り返し計算します。そしてその結果を 6 つの短い英単語に変換します。認証システム (一次的には PAM) は、前回最後に受け付けたワンタイムパスワードを記録しています。 @@ -1243,40 +1230,35 @@ る複数のワンタイムパスワードを生成することは不可能です。シーケンス番号はログインが成功するたびに一つずつ減らされて、ユーザとログインプログラムの間で同期が取られます。シーケンス番号が 1 まで - 減ったら、S/Key や OPIE を再度初期化する必要があります。 + 減ったら、OPIE を再度初期化する必要があります。次に、それぞれのシステムで関連する - 3 つのプログラムについて説明します。 - key と opiekey - プログラムは、シーケンス番号と、シードと、 + いくつかのプログラムについて説明します。 + opiekey プログラムは、シーケンス番号と、シードと、秘密のパスフレーズを受け付けて、ワンタイムパスワード 1 つ、または一連のワンタイムパスワードの一覧を生成します。 - keyinit と opiepasswd - プログラムは、それぞれ S/Key と OPIE + opiepasswd + プログラムは、OPIE を初期化するのに使用され、また秘密のパスフレーズ、シーケンス番号やシードを変更するためにも使用されます。 - それぞれのプログラムを実行するには、秘密のパスフレーズか、 + このプログラムを実行するには、秘密のパスフレーズか、または、シーケンス番号とシードとワンタイムパスワードの 1 組かの、どちらかを与えます。 - keyinfo と opieinfo プログラムは、 - それぞれに対応する認証ファイル (/etc/skeykeys - または /etc/opiekeys) - を調べて、プログラムを起動したユーザの現在のシーケンス番号とシードを表示します。 + opieinfo プログラムは、 + 認証ファイル (/etc/opiekeys) を調べて、 + プログラムを起動したユーザの現在のシーケンス番号とシードを表示します。この文書では、4 種類の異なる操作について説明します。 - 1 つ目は、keyinit または + 1 つ目は、 opiepasswd を信頼できる通信路上で利用して、最初にワンタイムパスワードを設定したり、秘密のパスフレーズやシードを変更する操作です。 - 2 つ目は、同じことを行うために keyinit - または opiepasswd - を信頼できない通信路上で利用する操作です。 - この場合は信頼できる通信路経由の - key または opiekey - を併用します。3 つ目は、key または - opiekey + 2 つ目は、同じことを行うために + opiepasswd を信頼できない通信路上で利用する操作です。 + この場合は信頼できる通信路経由の opiekey + を併用します。3 つ目は、opiekey を使い、信頼できない通信路を通じてログインする操作です。 - 4 番目は、key または opiekey + 4 番目は、opiekey を使って複数のワンタイムパスワードを一気に生成する操作です。ここで生成した複数のワンタイムパスワードは、メモしたり印刷したりして携帯し、 @@ -1288,32 +1270,9 @@ 信頼できる通信路での初期化 - 信頼できる通信路 (たとえばあるマシンのコンソール画面や、 - ssh - を使っている時など) を利用しているときに、S/Key を初めて初期化 - すること、S/Key の秘密のパスフレーズを変更すること、またはシー - ドを変更すること、をおこなうことができます。そのためには、まず - あなた自身がログインし、keyinit コマンドを - 以下のようにパラメータなしで実行します。 + OPIE を初めて初期化するには、opiepasswd + コマンドを実行してください。 - &prompt.user; keyinit -Adding unfurl: -Reminder - Only use this method if you are directly connected. -If you are using telnet or rlogin exit with no password and use keyinit -s. - ) `keyinit' コマンドが出力する注意です。訳すと、 - ) 注意 - この動作モードはマシンに直接入力しているときのみ利用 - ) すること。もし今 telnet や rlogin を使っているなら、秘密のパ - ) スフレーズを入力せずにこのままコマンドを終了し、かわりに - ) keyinit -s を実行すること。 -Enter secret password: -Again secret password: - -ID unfurl s/key is 99 to17757 -DEFY CLUB PRO NASH LACE SOFT - - OPIE では opiepasswd - が代わりに使われます。 - &prompt.user; opiepasswd -c [grimreaper] ~ $ opiepasswd -f -c Adding unfurl: @@ -1356,35 +1315,19 @@ MOS MALL GOAT ARM AVID COED 信頼できない通信路での初期化信頼できない通信路を使って秘密のパスフレーズを初期化または変更するためには、 - それとは別に key または opiekey + それとは別に opiekey プログラムを実行するための信頼できる通信路を用意しておく必要があります。 - たとえばそれは、あなたが信頼できる &macintosh; - のデスクアクセサリや信頼できるマシンのシェルプロンプトだったり - するでしょう。(訳注: ここでの通信路とはマシンそのものになりま + たとえばそれは、 + 信頼できるマシンのシェルプロンプトだったりするでしょう。 + (訳注: ここでの通信路とはマシンそのものになります。信頼できるマシンとは、信頼できる人がしっかり管理しているマシンということです)。他に準備しておくものとして、シーケンス番号 (100 は適切な値といえるでしょう) と、場合によっては自分で考えた、またはランダムに生成されたシードがあります。(あなたが S/Key を初期化しようとしているマシンへの) 信頼できない通信路を - 使うときには、keyinit -s コマンドを以下のよ - うに使用します。 + 使うときには、opiepasswd + コマンドを以下のように使用します。 - &prompt.user; keyinit -s -Updating unfurl: -Old key: to17758 -Reminder you need the 6 English words from the key command. - ) `keyinit' コマンドが出力する注意です。訳すと、 - ) 注意 - skey コマンドの出力する 6 英単語が必要になります。 -Enter sequence count from 1 to 9999: 100 -Enter new key [default to17759]: -s/key 100 to 17759 -s/key access password: -s/key access password:CURE MIKE BANE HIM RACY GORE - - - OPIE では、opiepasswd - を使います。 - &prompt.user; opiepasswd Updating unfurl: @@ -1402,22 +1345,11 @@ ID mark OTP key is 499 gr4269 LINE PAP MILK NELL BUOY TROY - デフォルトのシード (keyinit プログラム - は困ったことにこれを key - と呼んでいるのですが、混乱しないよう注意してください) - で構わなければ、Return + デフォルトのシードで構わなければ、Return を押してください。次に、アクセスパスワードを入れる前に、あらか - じめ用意しておいた信頼できる通信路(信頼できるマシンや信頼でき - る S/Key デスクアクセサリなど) へ移って、先ほどと同じパラメータ - を入力します。 + じめ用意しておいた信頼できる通信路へ移って、 + 先ほどと同じパラメータを入力します。 - &prompt.user; key 100 to17759 -Reminder - Do not use this program while logged in via telnet or rlogin. -Enter secret password: <秘密のパスフレーズ> -CURE MIKE BANE HIM RACY GORE - - OPIE では、 - &prompt.user; opiekey 498 to4268 Using the MD5 algorithm to compute response. Reminder: Don't use opiekey from telnet or dial-in sessions. @@ -1432,7 +1364,7 @@ GAME GAG WELT OUT DOWN CHAT ワンタイムパスワードを一つ生成する - S/Key または OPIE を初期化したら、 + OPIE を初期化したら、ログイン時には以下のようなプロンプトが出てくるでしょう。 &prompt.user; telnet example.com @@ -1443,23 +1375,10 @@ Escape character is '^]'. FreeBSD/i386 (example.com) (ttypa) login: <ユーザ名> -s/key 97 fw13894 -Password: - - OPIE については、 - -&prompt.user; telnet example.com -Trying 10.0.0.1... -Connected to example.com -Escape character is '^]'. - -FreeBSD/i386 (example.com) (ttypa) - -login: <username> otp-md5 498 gr4269 ext Password: - ここでは表示していませんが、S/Key と OPIE + ここでは表示していませんが、OPIE のプロンプトには便利な機能が備わっています。パスワードプロンプトに対して、何も入力せずに Return を押すとエコーモードに切り替わります。 @@ -1473,7 +1392,7 @@ Password: 次に、このログインプロンプトに対して入力するワンタイムパスワードを生成しなければなりません。 - これは、key または opiekey + これは、opiekey プログラムを使える信頼できるマシン上で行わなければなりません。 (これらのプログラムには DOS や &windows;, &macos; 版があります)。どちらも、コマンドラインからシーケンス番号とシードを指定しなければなりません。 @@ -1481,13 +1400,6 @@ Password: 信頼できるシステムで - &prompt.user; key 97 fw13894 -Reminder - Do not use this program while logged in via telnet or rlogin. -Enter secret password: -WELD LIP ACTS ENDS ME HAAG - - OPIE では - &prompt.user; opiekey 498 to4268 Using the MD5 algorithm to compute response. Reminder: Don't use opiekey from telnet or dial-in sessions. @@ -1496,14 +1408,6 @@ GAME GAG WELT OUT DOWN CHAT ここでワンタイムパスワードが得られました。ログインを続けましょう。 - - login: <username> -s/key 97 fw13894 -Password: <return to enable echo> -s/key 97 fw13894 -Password [echo on]: WELD LIP ACTS ENDS ME HAAG -Last login: Tue Mar 21 11:56:41 from 10.0.0.2 ... - @@ -1512,22 +1416,10 @@ Last login: Tue Mar 21 11:56:41 from 10.0.0.2 ...都合によっては、信頼できるマシンや信頼できる通信路が一切確保できないようなところで S/Key を使う必要があるでしょう。 - このような場合には、key および - opiekey + このような場合には、opiekey コマンドを使って複数のワンタイムパスワードをあらかじめ一気に生成し、紙に印刷して携帯していくことができます。たとえば - &prompt.user; key -n 5 30 zz99999 -Reminder - Do not use this program while logged in via telnet or rlogin. -Enter secret password: <秘密のパスフレーズ> -26: SODA RUDE LEA LIND BUDD SILT -27: JILT SPY DUTY GLOW COWL ROT -28: THEM OW COLA RUNT BONG SCOT -29: COT MASH BARR BRIM NAN FLAG -30: CAN KNEE CAST NAME FOLK BILK - - OPIE の場合には以下のようになります。 - &prompt.user; opiekey -n 5 30 zz99999 Using the MD5 algorithm to compute response. Reminder: Don't use opiekey from telnet or dial-in sessions. @@ -1555,66 +1447,10 @@ Enter secret pass phrase: <secret passwo &unix; パスワードの利用を制限する - S/Key は、ログインを受け付ける際のホスト名、ユーザ名、 - 端末のポート、IP アドレスなどを利用して、 - &unix; パスワードの利用を制限することができます。 - 設定ファイル /etc/skey.access に、 - 制限が記載されています。 - この設定ファイルの詳細に関してはマニュアル &man.skey.access.5; - をご覧ください。 - マニュアルにはこの機能に関わるセキュリティについて、 - いくつかの警告が記述してあります。 - この機能を使ってセキュリティを高めようとするのならば、 - 絶対にこのマニュアルを読んでください。 - - もし /etc/skey.access - ファイルが存在しないならば (&os; 4.X - のデフォルト状態ではそうです)、すべてのユーザが &unix; - パスワードを利用することができます。 - 逆に、もしファイルが存在するならば、 - skey.access - ファイルに明示的に記述されていない限り、すべてのユーザは S/Key - の利用を要求されます。どちらの場合においても、 - そのマシンのコンソールからはいつでも &unix; - パスワードを使ってログインすることが可能です。 - - 以下によく使われるであろう三種類の設定を含む設定ファイル - skey.access の例を示します。 - - permit internet 192.168.0.0 255.255.0.0 -permit user fnord -permit port ttyd0 - - はじめの行 (permit internet) で、telnet - などで接続するときの IP のソースアドレス (注意: これは偽造され - るおそれがあります) が特定の値とマスクに一致している場合に、 - &unix; パスワードの利用を許可することを指定しています。 - この設定自体はセキュリティを高めるための機能ではありません。そうでは - なく、ログインの権利を持つ許可されたユーザに対して、現在そのユー - ザが使っているネットワークが信頼できないと考えられるので S/Key - を使うべきである、ということを気づかせるための機能であると考え - てください。 - - 二行目 (permit user) - によって、ある特定のユーザ、この場合は - fnord、に対して、 - いつでも &unix; - パスワードの利用を許可するように指定しています。 - 一般的にはこの設定をおこなうべきではありません。 - key プログラムがどうしても使えない環境にい - る人や、ダム端末しかない環境にいる人、または何度教えても聞く耳 - を持たないような人をサポートする必要がある場合にのみ設定をおこ - なってください。 - - 三行目 (permit port) によって、ある特定 - の端末ポートからログインしようとするすべてのユーザに対して - &unix; パスワードの利用を許可するように指定しています。この設定 - はダイヤルアップ回線に対する設定として利用できるでしょう。 - - OPIE は S/Key が行うような、ログインセッションの IP + OPIE は、ログインセッションの IP アドレスをベースとした &unix; パスワードの使用を制限できます。 - 関連ファイルは、/etc/opieaccess です。 - &os; 5.0 以降のシステムではデオフォルトで用意されています。 + 関連ファイルは、/etc/opieaccess で、 + デフォルトで用意されています。このファイルの詳細や、このファイルを使用する際に考慮すべきセキュリィについては &man.opieaccess.5; を確認してください。 @@ -2568,14 +2404,8 @@ FreeBSD BUILT-19950429 (GR386) #0: Sat Apr 29 17:50:09 を確認してください。 kerberos5_server_enable="YES" -kadmind5_server_enable="YES" -kerberos_stash="YES" +kadmind5_server_enable="YES" - - は、 - &os; 4.X でのみ利用可能です。 - - 次に、Kerberos の設定ファイル /etc/krb5.conf を編集します。 @@ -3584,8 +3414,8 @@ Connection closed by foreign host. 実装をベースとしています。 - FreeBSD 5.X では hardware - accelerated IPsec スタックが追加されました。 + FreeBSD には hardware + accelerated IPsec スタックが含まれています。これは、Fast IPsec として知られているもので、 OpenBSD から移植されました。 IPsec のパフォーマンスを最適化するために、(利用できる場合には) @@ -3917,44 +3747,39 @@ Network #2 [ Internal Hosts ] gif デバイスのサポートを組み入れてコンパイルする必要があります。以下の行を加えることで設定できます。 - pseudo-device gif + device gif 両方のコンピュータのカーネルコンフィグレーションファイルに上記の行を加え、コンパイル、インストールし、通常通り再起動してください。トンネルの設定は 2 つのプロセスで行います。 - 最初は、&man.gifconfig.8; を使って、 + 最初は、&man.ifconfig.8; を使って、外部 (パブリック) IP アドレスを設定するします。その後、プライベート IP アドレスを &man.ifconfig.8; を使って設定します。 - - &os; 5.X では、 - &man.gifconfig.8; ユーティリティが提供していた機能は、 - &man.ifconfig.8; にマージされました。 - ネットワーク #1 にあるゲートウェイコンピュータで以下の 2 つのコマンドを実行してトンネルを作成します。 - gifconfig gif0 A.B.C.D W.X.Y.Z + ifconfig gif0 A.B.C.D W.X.Y.Z ifconfig gif0 inet 192.168.1.1 192.168.2.1 netmask 0xffffffff もう片方のゲートウェイコンピュータで、 IP アドレスの順を逆にして同じコマンドを実行します。 - gifconfig gif0 W.X.Y.Z A.B.C.D + ifconfig gif0 W.X.Y.Z A.B.C.D ifconfig gif0 inet 192.168.2.1 192.168.1.1 netmask 0xffffffff 以下を実行して、設定を確認をしてください。 - gifconfig gif0 + ifconfig gif0 たとえば、ネットワーク #1 のゲートウェイにおいては、以下のように確認できます。 - &prompt.root; gifconfig gif0 + &prompt.root; ifconfig gif0 gif0: flags=8011<UP,POINTTOPOINT,MULTICAST> mtu 1280 inet 192.168.1.1 --> 192.168.2.1 netmask 0xffffffff physical address inet A.B.C.D --> W.X.Y.Z @@ -4082,8 +3907,8 @@ Destination Gateway Flags Refs Use まとめ - 両方のカーネルを pseudo-device - gif で構築します。 + 両方のカーネルを device gif + で構築します。ゲートウェイホスト #1 の /etc/rc.conf @@ -4190,14 +4015,15 @@ options IPSEC_ESP でセキュリティアソシエーションを管理するデーモンは数多くあります。この文書では、その中の一つの racoon の使い方について説明します。 racoon は、&os; Ports Collection の - security/racoon + security/ipsec-tools からインストールできます。 racoon - racoon は、両方のゲートウェイホストで実行される必要があります。 + racoon ソフトウェアは、 + 両方のゲートウェイホストで実行される必要があります。それぞれのホストで、もう一つの VPN の端の IP アドレスおよび (あなたが選択したもので、両方のゲートウェイで同じ必要のある) 秘密鍵で設定する必要があります。 @@ -4212,7 +4038,7 @@ options IPSEC_ESP -- 彼らがカギをクラックしたときには、 2 つのデーモンは他の鍵を選択していることでしょう。 - racoon's の設定は、 + racoon の設定は、 ${PREFIX}/etc/racoon で行われます。ここには、設定ファイルが置かれていますが、それほど多く変更する必要はありません。 @@ -4508,7 +4334,8 @@ options IPSEC_ESP security/racoon をインストールします。 + role="package">security/ipsec-tools + をインストールします。両方のゲートウェイホストにおいて、 ${PREFIX}/etc/racoon/psk.txt を変更して、リモートホストの IP @@ -4587,7 +4414,7 @@ ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D これは rlogin, rsh, rcp, telnet をそのまま置き換えて使えます。 - また、他のあらゆる TCP/IP 接続を + また、TCP/IP 接続を SSH 経由でセキュアにトンネル/フォワードすることもできます。 OpenSSH はすべてのトラフィックを暗号化し、盗聴や接続の乗っ取り等のネットワークレベルの攻撃を事実上無効化します。 @@ -4595,8 +4422,7 @@ ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D OpenSSH は OpenBSD プロジェクトによって維持管理されており、SSH v1.2.12 に最新のすべてのバグ修正と更新を適用したものをベースにしています。 - OpenSSH クライアントは SSH プロトコル 1 と 2 の両方に互換性があります。 - OpenSSH は FreeBSD 4.0 以降ベースシステムに取り込まれています。 + OpenSSH クライアントは SSH プロトコル 1 と 2 の両方に互換性があります。 OpenSSH を使うことの利点 @@ -4616,10 +4442,11 @@ ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D 有効化 - sshd デーモンは、 - &os; 4.X および &os; 5.X においてデフォルトで有効です。 - &os; 5.X ではインストール時に無効にすることもできます。 - 有効になっているかどうかを確認するには、 + sshd は、 + &os; の Standard インストールの途中で、 + オプションとして表示されます。 + sshd + が有効になっているかどうかを確認するには、 rc.conf ファイルを確認してください。 sshd_enable="YES" @@ -4627,9 +4454,11 @@ ipfw add 1 allow ipencap from W.X.Y.Z to A.B.C.D 次に起動したときから OpenSSH のデーモンプログラムである &man.sshd.8; が起動します。 - もしくはコマンドラインから単に sshd - と入力して、直接 sshd - デーモンを実行しても構いません。 + もしくは /etc/rc.d/sshd &man.rc.8; + スクリプトを使って、OpenSSH + を起動することもできます。 + + /etc/rc.d/sshd start @@ -5241,11 +5070,11 @@ drwxr-xr-x 2 robert robert 512 Nov 10 11:54 public_ アカウントに送られます。この時点では、設定は必要ありません。 - インストールが終わったら、管理者は以下のコマンドを実行して、 - /var/db/portaudit - にローカルで保存されているデータベースをアップデートする必要があります。 + インストールが終わったら、管理者は以下のコマンドを実行することで、 + データベースをアップデートし、インストールされている + package の脆弱性を調べることができます。 - &prompt.root; portaudit -F + &prompt.root; portaudit -Fda データベースは、 @@ -5255,12 +5084,13 @@ drwxr-xr-x 2 robert robert 512 Nov 10 11:54 public_ Ports Collection - からインストールされたサードパーティ製ユーティリティを監査するためには、 + からインストールされたサードパーティ製ユーティリティを監査するには、管理者は以下のコマンドだけを実行する必要があります。 &prompt.root; portaudit -a - 以下は出力の例です。 + Portaudit は、脆弱性のある package + について以下のような出力を行います。 Affected package: cups-base-1.1.22.0_1 Type of problem: cups-base -- HPGL buffer overflow vulnerability. @@ -5335,7 +5165,7 @@ Corrected: 2003-09-23 16:42:59 UTC (RELENG_4, 4.9 2003-09-23 16:51:24 UTC (RELENG_4_5, 4.5-RELEASE-p33) 2003-09-23 16:52:45 UTC (RELENG_4_4, 4.4-RELEASE-p43) 2003-09-23 16:54:39 UTC (RELENG_4_3, 4.3-RELEASE-p39) -&os; only: NO +CVE Name: CVE-XXXX-XXXX For general information regarding FreeBSD Security Advisories, including descriptions of the fields above, security branches, and the @@ -5429,10 +5259,9 @@ VII. References タイムゾーン、およびリリースが示されます。 - - &os; only フィールドは、 - この脆弱性が、&os; にのみ影響するか、もしくは、 - 他のオペレーティングシステムにも同様に影響するかどうかを示します。 + + 共通の脆弱性データベースシステムにおいて、 + 脆弱性を探すために使用できる識別情報を示します。 From owner-svn-doc-head@freebsd.org Fri Oct 6 09:36:07 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id A9A53E31EE8; Fri, 6 Oct 2017 09:36:07 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8354A772F0; Fri, 6 Oct 2017 09:36:07 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v969a6jN076256; Fri, 6 Oct 2017 09:36:06 GMT (envelope-from wosch@FreeBSD.org) Received: (from wosch@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v969a64c076255; Fri, 6 Oct 2017 09:36:06 GMT (envelope-from wosch@FreeBSD.org) Message-Id: <201710060936.v969a64c076255@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: wosch set sender to wosch@FreeBSD.org using -f From: Wolfram Schneider Date: Fri, 6 Oct 2017 09:36:06 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51064 - head/share/tools X-SVN-Group: doc-head X-SVN-Commit-Author: wosch X-SVN-Commit-Paths: head/share/tools X-SVN-Commit-Revision: 51064 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 09:36:07 -0000 Author: wosch Date: Fri Oct 6 09:36:06 2017 New Revision: 51064 URL: https://svnweb.freebsd.org/changeset/doc/51064 Log: Import a regression test script for the build of www.freebsd.org The main purpose of the script is to validate the output after a refactoring of the Makefile tool chain, and to improve the build speed. Added: head/share/tools/webupdate-regression (contents, props changed) Added: head/share/tools/webupdate-regression ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/share/tools/webupdate-regression Fri Oct 6 09:36:06 2017 (r51064) @@ -0,0 +1,246 @@ +#!/bin/sh +# Copyright (c) 2017 Wolfram Schneider +# +# regression test of the build of www.freebsd.org +# Based on git +# +# examples: +# +# run on 2 CPUs +# make_opt=-j2 /path/to/webupdate-regression +# +# run from a local GIT repo in $HOME/freebsd-doc +# GIT_REPO_FREEBSD_DOC="$HOME/freebsd-doc" /path/to/webupdate-regression +# +# build html-split format only, on 8 CPUs +# WEBUPDATE_FORMATS="html-split" make_opt=-j8 /path/to/webupdate-regression +# +# build html and html-split format, on 16 CPUs max. +# WEBUPDATE_FORMATS="html html-split" make_opt=-j16 /path/to/webupdate-regression +# +# do not run the `make clean`' test after successfully build +# WEBUPDATE_RUN_CLEAN=NO /path/to/webupdate-regression +# +# test only english pages +# ENGLISH_ONLY=YES /path/to/webupdate-regression +# +# clean git checkout after success +# WEBUPDATE_SANDBOX_CLEANUP=YES /path/to/webupdate-regression +# +# +# $FreeBSD$ + +set -e + +: ${NO_OBJ=YES} +: ${make_opt=-j8} +: ${GIT_REPO_FREEBSD_DOC="$HOME/freebsd-doc"} +: ${WEBUPDATE_FORMATS="html-split html"} +: ${WEBUPDATE_RUN_CLEAN=YES} +: ${WEBUPDATE_LEVEL="3"} +: ${WEBUPDATE_SANDBOX_CLEANUP="NO"} + +FORMATS=$WEBUPDATE_FORMATS +export NO_OBJ +export FORMATS + + +log () { + file=$1 + echo " ...done" +} + +checkout () +{ + dir=$(mktemp -d /tmp/doc-build.XXXXXXX) + + cd $dir + echo "Run from $dir" + echo "date: $(date)" + echo "ENGLISH_ONLY=$ENGLISH_ONLY" + echo "WEB_ONLY=$WEB_ONLY" + echo "FORMATS=\"$FORMATS\"" + echo "WEBUPDATE_RUN_CLEAN=$WEBUPDATE_RUN_CLEAN" + echo "WEBUPDATE_SANDBOX_CLEANUP=$WEBUPDATE_SANDBOX_CLEANUP" + echo "WEBUPDATE_LEVEL=$WEBUPDATE_LEVEL" + echo "NO_OBJ=$NO_OBJ" + echo "make_opt=$make_opt" + + echo "git clone from $GIT_REPO_FREEBSD_DOC -> doc" + git clone -q $GIT_REPO_FREEBSD_DOC doc + cd doc + echo "branch: $(git branch)" + echo "cwd: $(pwd)" + + echo "" +} + +# build doc only, from ./doc +# parallel build, 4-40 minutes +build_doc () +{ + logfile=$1 + echo -n "build doc (4-40min) $(pwd)/$logfile" + time make $make_opt p-all >> $logfile 2>&1; log $logfile +} + +# build web only, from english web pages +build_htdocs_web () +{ + logfile=$1 + ( + cd en_US.ISO8859-1/htdocs + echo -n "build htdocs web (1min) $(pwd)/$logfile" + WEB_ONLY=YES time make $make_opt >> $logfile 2>&1; log $logfile + echo -n "build htdocs web/ports (1min)" + WEB_ONLY=YES time make -C./ports $make_opt >> $logfile 2>&1; log $logfile + ) +} + +# build web + doc, from english web pages +# after build_htdocs_web: 1-3 minutes (?) +build_htdocs () +{ + logfile=$1 + ( + cd en_US.ISO8859-1/htdocs + echo -n "build htdocs (1-3min) $(pwd)/$logfile" + time make $make_opt all >> $logfile 2>&1; log $logfile + ) +} + +# install web only, from english web pages +install_htdocs () +{ + logfile=$1 + ( + cd en_US.ISO8859-1/htdocs + echo -n "install htdocs web (<10 sec) $(pwd)/$logfile" + DESTDIR=$dir/www WEB_ONLY=YES time make $make_opt install >> $logfile 2>&1; log $logfile + #egrep -rl wosch $dir/www >/dev/null + ) +} + +# install web + doc, from english web pages +install_doc () +{ + logfile=$1 + ( + echo "no parallel install" + make_opt= + + cd en_US.ISO8859-1/htdocs + echo -n "install htdocs (<30 sec) $(pwd)/$logfile" + DESTDIR=$dir/www time make $make_opt install >> $logfile 2>&1; log $logfile + ) +} + +# clean doc from ./doc +# parallel clean +clean_doc () +{ + logfile=$1 + echo -n "clean doc (<5 sec) $(pwd)/$logfile" + time make $make_opt p-clean >> $logfile 2>&1; log $logfile +} + +# clean doc from english web pages +# is required for docs which don't have a web pages (./htdocs) +clean_htdocs () +{ + logfile=$1 + ( + cd en_US.ISO8859-1/htdocs + echo -n "clean htdocs web + doc (<20 sec) $(pwd)/$logfile" + time make $make_opt clean >> $logfile 2>&1; log $logfile + ) +} + +######################################################################################## +# + +checkout + +# ./doc +if [ "$WEB_ONLY" != "YES" ]; then + build_doc log.build_doc + if [ $WEBUPDATE_LEVEL -ge 2 ]; then + build_doc log.build_doc2 + fi + if [ $WEBUPDATE_LEVEL -ge 3 ]; then + build_doc log.build_doc3 + fi +fi + +# doc/en_US.ISO8859-1/htdocs +build_htdocs_web log.build_htdocs_web +if [ $WEBUPDATE_LEVEL -ge 2 ]; then + build_htdocs_web log.build_htdocs_web2 +fi +if [ $WEBUPDATE_LEVEL -ge 3 ]; then + build_htdocs_web log.build_htdocs_web3 +fi + +# doc/en_US.ISO8859-1/htdocs/doc +build_htdocs log.build_htdocs +if [ $WEBUPDATE_LEVEL -ge 2 ]; then + build_htdocs log.build_htdocs2 +fi +if [ $WEBUPDATE_LEVEL -ge 3 ]; then + build_htdocs log.build_htdocs3 +fi + +# install doc/en_US.ISO8859-1/htdocs +install_htdocs log.install_htdocs +if [ $WEBUPDATE_LEVEL -ge 2 ]; then + install_htdocs log.install_htdocs2 +fi + if [ $WEBUPDATE_LEVEL -ge 3 ]; then +install_htdocs log.install_htdocs3 +fi + +# install doc/en_US.ISO8859-1/htdocs/doc +install_doc log.install_doc +if [ $WEBUPDATE_LEVEL -ge 2 ]; then + install_doc log.install_doc2 +fi +if [ $WEBUPDATE_LEVEL -ge 3 ]; then + install_doc log.install_doc3 +fi + +# make clean +if [ "$WEBUPDATE_RUN_CLEAN" = "YES" ]; then + clean_htdocs log.clean_htdocs + if [ $WEBUPDATE_LEVEL -ge 2 ]; then + clean_htdocs log.clean_htdocs2 + fi + + clean_doc log.clean_doc + if [ $WEBUPDATE_LEVEL -ge 2 ]; then + clean_doc log.clean_doc2 + fi +fi + +echo "" +echo "successfully done" +echo "" + +# display user time for each task +tail -n 1 $(ls -tr $(find . -name 'log.*' -type f)) + +echo "" +echo "installed data disk usage: $(du -hs $dir/www)" +echo "installed file number: $(find $dir/www | wc -l)" +( cd $dir/www && find -s . > ../find.www ) + +if [ "$WEBUPDATE_SANDBOX_CLEANUP" = "YES" ]; then + echo "cleanup sandbox $dir" + rm -rf $dir +else + echo "" + echo "Please cleanup: rm -rf $dir" +fi + +exit 0 + +#EOF From owner-svn-doc-head@freebsd.org Fri Oct 6 10:44:01 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 77DF8E334B7; Fri, 6 Oct 2017 10:44:01 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 448927D149; Fri, 6 Oct 2017 10:44:01 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v96Ai029005021; Fri, 6 Oct 2017 10:44:00 GMT (envelope-from wosch@FreeBSD.org) Received: (from wosch@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v96Ai0We005019; Fri, 6 Oct 2017 10:44:00 GMT (envelope-from wosch@FreeBSD.org) Message-Id: <201710061044.v96Ai0We005019@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: wosch set sender to wosch@FreeBSD.org using -f From: Wolfram Schneider Date: Fri, 6 Oct 2017 10:44:00 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51065 - head/share/mk X-SVN-Group: doc-head X-SVN-Commit-Author: wosch X-SVN-Commit-Paths: head/share/mk X-SVN-Commit-Revision: 51065 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 10:44:01 -0000 Author: wosch Date: Fri Oct 6 10:44:00 2017 New Revision: 51065 URL: https://svnweb.freebsd.org/changeset/doc/51065 Log: 'make obj' doesn't really work for the docs, disable it by default PR: 222488 Modified: head/share/mk/doc.project.mk head/share/mk/web.site.mk Modified: head/share/mk/doc.project.mk ============================================================================== --- head/share/mk/doc.project.mk Fri Oct 6 09:36:06 2017 (r51064) +++ head/share/mk/doc.project.mk Fri Oct 6 10:44:00 2017 (r51065) @@ -57,6 +57,9 @@ # Currently the only method. # +# 'make obj' doesn't really work for the docs, disable it +NO_OBJ?= YES + # Document-specific defaults DOCFORMAT?= docbook MAINTAINER?= doc@FreeBSD.org @@ -107,7 +110,7 @@ DOC_LOCAL_MK= ${DOC_PREFIX}/${LANGCODE}/share/mk/doc.l # parallel build for target "all" and "clean" NCPU?= ${.MAKE.JOBS} -p-all p-clean p-obj: +p-all p-clean: make -V SUBDIR | sed -E 's/[ ]+$$//' | tr " " "\n" | \ sed -E 's/^/make -C /; s/$$/ ${.TARGET:S/^p-//}/' | \ tr '\n' '\0' | xargs -0 -n1 -P${NCPU:S/^$$/8/} /bin/sh -c Modified: head/share/mk/web.site.mk ============================================================================== --- head/share/mk/web.site.mk Fri Oct 6 09:36:06 2017 (r51064) +++ head/share/mk/web.site.mk Fri Oct 6 10:44:00 2017 (r51065) @@ -325,6 +325,9 @@ _PROGSUBDIR: .USE .endfor .endif +# 'make obj' doesn't really work for the docs, disable it +NO_OBJ?= YES + .include # From owner-svn-doc-head@freebsd.org Fri Oct 6 13:13:00 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 05F00E36F2E; Fri, 6 Oct 2017 13:13:00 +0000 (UTC) (envelope-from wschnr@googlemail.com) Received: from mail-qt0-x232.google.com (mail-qt0-x232.google.com [IPv6:2607:f8b0:400d:c0d::232]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id BBFF582DF7; Fri, 6 Oct 2017 13:12:59 +0000 (UTC) (envelope-from wschnr@googlemail.com) Received: by mail-qt0-x232.google.com with SMTP id q4so31273931qtq.8; Fri, 06 Oct 2017 06:12:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=mime-version:sender:in-reply-to:references:from:date:message-id :subject:to:cc; bh=9d9nJ5CRdLkK7m4aEQRJ3JFRFxO6/PnPMr0fU9VBm8c=; b=Sh4eAW3VWKEtKYhnW9G6EfLutpNsTi7f0dHPNgGvEwdwTqi9LQSmkEJWiG1uy0O3V6 5kfeHb4Nhhu0NhRLkYF4e853n2uR7orESbqXHU8X+aue4/nj5SaSzHdG0FbWb4CqDQ84 j05UMBAJ7u2BNCgbuPoiIkCF8BBeaxDxStnKc5la42mHRSL/mOALh5PRoAJTjvdsfScy dMGbbqL4q8PULCYTtPMkMsV19WLemjEW+ZQ7w80x8m/UVBwgglXFKJxAT6YoqHp7/fxs O2x/RClNutfY6beW+lBIHaDnGqvQcmXY7tVI9L/TM83o0rAtKiwXahKkAQQpXXtu7hQy SMaA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:sender:in-reply-to:references:from :date:message-id:subject:to:cc; bh=9d9nJ5CRdLkK7m4aEQRJ3JFRFxO6/PnPMr0fU9VBm8c=; b=LkekkLOVffdhxEY1SitA+AfVvYD3i1BZ/KvcTCrP0GAb/epiGncA/RaqBKiKyMEQyP JPpeM8GxqWs+wXGqm8p2PkXDSCknIS6zDxenbeN0tTdIWGCrpAijZq9BpNSNl5oEsQSQ Q7NhNOjg6pKXe+kgYaCrKG/4OClBxApKaGzQlP0aJZ7Q7tHdt8RUiJTnDl1J5qlsiSVe DSlFWHGWJDGGSFIK8PynZSqd3XihOGA+9878cL5rUzHj1Y2GdBsRhe+/GI2SpBIYJAft S8EVN68bvtaM3koJOid7MGg2DcwbEx+rd1WHKncebNtJMbEpsuX4xktJNHADRudUtIq0 eKHA== X-Gm-Message-State: AMCzsaU2vjfNN4Q5SrZaWbq1zQMzhJGtFJFYiKaG3LMTfxb9sV9bH0b/ faCBJt/+87eSF440APuxGQexCgwqC7mH892nTls26g== X-Google-Smtp-Source: AOwi7QASRubVD9QbILKSvPg8b6bEUY64dmzYSd7RF2HlmMimH1Ipz4FwextbfQa/x4XY6qGJy/a6iPrqYIXJEsYJ/S8= X-Received: by 10.129.37.209 with SMTP id l200mr1243470ywl.295.1507295578434; Fri, 06 Oct 2017 06:12:58 -0700 (PDT) MIME-Version: 1.0 Sender: wschnr@googlemail.com Received: by 10.37.74.67 with HTTP; Fri, 6 Oct 2017 06:12:43 -0700 (PDT) In-Reply-To: References: <201710052009.v95K9WUj038120@repo.freebsd.org> <20171005201225.GH49395@FreeBSD.org> From: Wolfram Schneider Date: Fri, 6 Oct 2017 15:12:43 +0200 X-Google-Sender-Auth: IprPLChBfvg7YtXyuIgdKKowCAc Message-ID: Subject: Re: svn commit: r51056 - head/en_US.ISO8859-1/htdocs/releases/12.0R To: Glen Barber Cc: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Content-Type: text/plain; charset="UTF-8" X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 13:13:00 -0000 On 6 October 2017 at 11:15, Wolfram Schneider wrote: > On 5 October 2017 at 22:12, Glen Barber wrote: >> On Thu, Oct 05, 2017 at 08:09:32PM +0000, Glen Barber wrote: >>> Author: gjb >>> Date: Thu Oct 5 20:09:32 2017 >>> New Revision: 51056 >>> URL: https://svnweb.freebsd.org/changeset/doc/51056 >>> >>> Log: >>> Comment .ORDER lines, breaking the build. >>> >> >> This now builds properly on build-web. Sorry for the noise. > > The build still fails for me: > > $ cd en_US.ISO8859-1/htdocs/releases/12.0R/ > $ make clean && make all PS: if you run `make all' twice it will pass. This is another issue - after a failure of man2hwnotes.pl the script should not left any files, and a second run has to rebuild them. -Wolfram > make: "/home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile" > line 71: warning: "MAN4DIR not found. Unable to build hardware.html" > /bin/rm -f Errs errs mklog index.html schedule.html dev-auto.ent > /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/autogen.ent > /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml > /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml.sort > /home/wosch/doc-svn/en_US.ISO8859-1/share/xml/mirrors.xml.sort.tmp > make: "/home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile" > line 71: warning: "MAN4DIR not found. Unable to build hardware.html" > install /home/wosch/doc-svn/share/xml/catalog-cwd.xml > /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > echo '' >> > /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/autogen.ent > env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml > file:///home/wosch/doc-svn/share/xml/catalog.xml > file:///usr/local/share/xml/catalog" /usr/local/bin/xmllint > --xinclude --valid --noout --nonet index.xml > env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml > file:///home/wosch/doc-svn/share/xml/catalog.xml > file:///usr/local/share/xml/catalog" /usr/local/bin/xsltproc > --xinclude --nonet --maxvars 20000 --debug -o index.html > http://www.FreeBSD.org/XML/share/xml/xhtml.xsl index.xml > env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml > file:///home/wosch/doc-svn/share/xml/catalog.xml > file:///usr/local/share/xml/catalog" /usr/local/bin/xmllint > --xinclude --valid --noout --nonet schedule.xml > env XML_CATALOG_FILES="file:///home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/catalog-cwd.xml > file:///home/wosch/doc-svn/en_US.ISO8859-1/share/xml/catalog.xml > file:///home/wosch/doc-svn/share/xml/catalog.xml > file:///usr/local/share/xml/catalog" /usr/local/bin/xsltproc > --xinclude --nonet --maxvars 20000 --debug -o schedule.html > http://www.FreeBSD.org/XML/share/xml/xhtml.xsl schedule.xml > /usr/local/bin/perl > /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/../../share/misc/man2hwnotes.pl > -c -a /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R/../../share/misc/dev.archlist.txt > -o dev-auto.ent /*.4 /man4.*/*.4 > > No such file or directory: Could not open /*.4 in 160. > > *** Error code 2 > > > Stop. > > make: stopped in /home/wosch/doc-svn/en_US.ISO8859-1/htdocs/releases/12.0R > > -Wolfram > > -- > Wolfram Schneider https://wolfram.schneider.org -- Wolfram Schneider https://wolfram.schneider.org From owner-svn-doc-head@freebsd.org Fri Oct 6 14:08:47 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 34A78E38212; Fri, 6 Oct 2017 14:08:47 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 00F73F84; Fri, 6 Oct 2017 14:08:46 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v96E8k0x090425; Fri, 6 Oct 2017 14:08:46 GMT (envelope-from wosch@FreeBSD.org) Received: (from wosch@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v96E8jQ3090419; Fri, 6 Oct 2017 14:08:45 GMT (envelope-from wosch@FreeBSD.org) Message-Id: <201710061408.v96E8jQ3090419@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: wosch set sender to wosch@FreeBSD.org using -f From: Wolfram Schneider Date: Fri, 6 Oct 2017 14:08:45 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51066 - in head: de_DE.ISO8859-1/books/fdp-primer en_US.ISO8859-1/articles/freebsd-releng share/mk zh_TW.UTF-8/books/fdp-primer zh_TW.UTF-8/books/handbook X-SVN-Group: doc-head X-SVN-Commit-Author: wosch X-SVN-Commit-Paths: in head: de_DE.ISO8859-1/books/fdp-primer en_US.ISO8859-1/articles/freebsd-releng share/mk zh_TW.UTF-8/books/fdp-primer zh_TW.UTF-8/books/handbook X-SVN-Commit-Revision: 51066 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 14:08:47 -0000 Author: wosch Date: Fri Oct 6 14:08:45 2017 New Revision: 51066 URL: https://svnweb.freebsd.org/changeset/doc/51066 Log: handles implicit dependencies of DocBook documentation This feature can be disabled with DOCBOOK_DEPS_DISABLE=YES Missing dependencies will be reported as a warning, and should be fixed by the document authors. PR: 222826 Added: head/share/mk/doc.docbook-dep.mk (contents, props changed) Modified: head/de_DE.ISO8859-1/books/fdp-primer/Makefile head/en_US.ISO8859-1/articles/freebsd-releng/Makefile head/share/mk/doc.project.mk head/zh_TW.UTF-8/books/fdp-primer/Makefile head/zh_TW.UTF-8/books/handbook/Makefile Modified: head/de_DE.ISO8859-1/books/fdp-primer/Makefile ============================================================================== --- head/de_DE.ISO8859-1/books/fdp-primer/Makefile Fri Oct 6 10:44:00 2017 (r51065) +++ head/de_DE.ISO8859-1/books/fdp-primer/Makefile Fri Oct 6 14:08:45 2017 (r51066) @@ -52,4 +52,7 @@ SRCS+= chapters.ent URL_RELPREFIX?= ../../../.. DOC_PREFIX?= ${.CURDIR}/../../.. +# Fixme! +DOCBOOK_DEPS_DISABLE=YES + .include "${DOC_PREFIX}/share/mk/doc.project.mk" Modified: head/en_US.ISO8859-1/articles/freebsd-releng/Makefile ============================================================================== --- head/en_US.ISO8859-1/articles/freebsd-releng/Makefile Fri Oct 6 10:44:00 2017 (r51065) +++ head/en_US.ISO8859-1/articles/freebsd-releng/Makefile Fri Oct 6 14:08:45 2017 (r51066) @@ -12,14 +12,10 @@ INSTALL_ONLY_COMPRESSED?= SRCS= article.xml -DEPS!= egrep '' \ - ${SRCS} | sed -E 's,.*"./([^"]+)".*,\1,' - CSS_SHEET_ADDITIONS=extra.css URL_RELPREFIX?= ../../../.. DOC_PREFIX?= ${.CURDIR}/../../.. -index.html ${DOC}.html: ${DEPS} - .include "${DOC_PREFIX}/share/mk/doc.project.mk" + Added: head/share/mk/doc.docbook-dep.mk ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/share/mk/doc.docbook-dep.mk Fri Oct 6 14:08:45 2017 (r51066) @@ -0,0 +1,30 @@ +# +# $FreeBSD$ +# +# This include file handles implicit dependencies of +# DocBook documentation in the FreeBSD Documentation Project. +# + +# +# extract the depending *.xml files from the main +# input sources on the fly: +# +# +# +# => ./releng-building.xml +# + +.if ${.TARGETS} == "all" +_DOCBOOK_DEPS_SYSTEM != for i in $$(egrep '' ${SRCS} | sed -E 's,.*"([^"]+)".*,\1,');do \ + if [ -e $$i ]; then \ + echo $i; \ + else \ + echo "Warning: dep file $$(pwd)/$$i does not exists" >&2; \ + fi; \ + done +.endif + +DOCBOOK_DEPS += ${_DOCBOOK_DEPS_SYSTEM} + +index.html ${DOC}.html: ${DOCBOOK_DEPS} + Modified: head/share/mk/doc.project.mk ============================================================================== --- head/share/mk/doc.project.mk Fri Oct 6 10:44:00 2017 (r51065) +++ head/share/mk/doc.project.mk Fri Oct 6 14:08:45 2017 (r51066) @@ -99,6 +99,11 @@ DOC_LOCAL_MK= ${DOC_PREFIX}/${LANGCODE}/share/mk/doc.l .if defined(DOC) .if ${DOCFORMAT} == "docbook" .include "doc.docbook.mk" + +.if !defined(DOCBOOK_DEPS_DISABLE) || ${DOCBOOK_DEPS_DISABLE} != "YES" +.include "doc.docbook-dep.mk" +.endif + .endif .if ${DOCFORMAT} == "slides" .include "doc.slides.mk" Modified: head/zh_TW.UTF-8/books/fdp-primer/Makefile ============================================================================== --- head/zh_TW.UTF-8/books/fdp-primer/Makefile Fri Oct 6 10:44:00 2017 (r51065) +++ head/zh_TW.UTF-8/books/fdp-primer/Makefile Fri Oct 6 14:08:45 2017 (r51066) @@ -31,4 +31,7 @@ IMAGES_LIB+= callouts/5.png URL_RELPREFIX?= ../../../.. DOC_PREFIX?= ${.CURDIR}/../../.. +# Fixme! +DOCBOOK_DEPS_DISABLE=YES + .include "${DOC_PREFIX}/share/mk/doc.project.mk" Modified: head/zh_TW.UTF-8/books/handbook/Makefile ============================================================================== --- head/zh_TW.UTF-8/books/handbook/Makefile Fri Oct 6 10:44:00 2017 (r51065) +++ head/zh_TW.UTF-8/books/handbook/Makefile Fri Oct 6 14:08:45 2017 (r51066) @@ -161,4 +161,7 @@ SYMLINKS= ${DESTDIR} index.html handbook.html URL_RELPREFIX?= ../../../.. DOC_PREFIX?= ${.CURDIR}/../../.. +# Fixme! +DOCBOOK_DEPS_DISABLE=YES + .include "${DOC_PREFIX}/share/mk/doc.project.mk" From owner-svn-doc-head@freebsd.org Fri Oct 6 14:22:46 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 8386CE38871; Fri, 6 Oct 2017 14:22:46 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 4CA4F1B0E; Fri, 6 Oct 2017 14:22:46 +0000 (UTC) (envelope-from wosch@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v96EMj5N098814; Fri, 6 Oct 2017 14:22:45 GMT (envelope-from wosch@FreeBSD.org) Received: (from wosch@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v96EMjlF098813; Fri, 6 Oct 2017 14:22:45 GMT (envelope-from wosch@FreeBSD.org) Message-Id: <201710061422.v96EMjlF098813@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: wosch set sender to wosch@FreeBSD.org using -f From: Wolfram Schneider Date: Fri, 6 Oct 2017 14:22:45 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51067 - head/share/pgpkeys X-SVN-Group: doc-head X-SVN-Commit-Author: wosch X-SVN-Commit-Paths: head/share/pgpkeys X-SVN-Commit-Revision: 51067 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 14:22:46 -0000 Author: wosch Date: Fri Oct 6 14:22:45 2017 New Revision: 51067 URL: https://svnweb.freebsd.org/changeset/doc/51067 Log: the creation of pgpkeyring.txt must be atomar Modified: head/share/pgpkeys/Makefile Modified: head/share/pgpkeys/Makefile ============================================================================== --- head/share/pgpkeys/Makefile Fri Oct 6 14:08:45 2017 (r51066) +++ head/share/pgpkeys/Makefile Fri Oct 6 14:22:45 2017 (r51067) @@ -17,7 +17,8 @@ pgpkeyring: keyring.xml @${XSLTPROC} ${XSLTPROCOPTS} ${XSLPGP} keyring.xml pgpkeyring.txt: - @${MAKE} pgpkeyring >${.TARGET} + @${MAKE} pgpkeyring > ${.TARGET}.tmp + ${MV} ${.TARGET}.tmp ${.TARGET} .include "${DOC_PREFIX}/share/mk/doc.project.mk" From owner-svn-doc-head@freebsd.org Fri Oct 6 16:53:22 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 46E44E3BA46; Fri, 6 Oct 2017 16:53:22 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 200B866071; Fri, 6 Oct 2017 16:53:22 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v96GrLUW061650; Fri, 6 Oct 2017 16:53:21 GMT (envelope-from gjb@FreeBSD.org) Received: (from gjb@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v96GrKLR061645; Fri, 6 Oct 2017 16:53:20 GMT (envelope-from gjb@FreeBSD.org) Message-Id: <201710061653.v96GrKLR061645@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: gjb set sender to gjb@FreeBSD.org using -f From: Glen Barber Date: Fri, 6 Oct 2017 16:53:20 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51068 - in head/en_US.ISO8859-1/htdocs/releases/12.0R: . errata hardware readme relnotes X-SVN-Group: doc-head X-SVN-Commit-Author: gjb X-SVN-Commit-Paths: in head/en_US.ISO8859-1/htdocs/releases/12.0R: . errata hardware readme relnotes X-SVN-Commit-Revision: 51068 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 16:53:22 -0000 Author: gjb Date: Fri Oct 6 16:53:20 2017 New Revision: 51068 URL: https://svnweb.freebsd.org/changeset/doc/51068 Log: - Fix dev-auto.ent generation so the target file exists only on success. [1] - Fix the clean target for 12.0R/*/ subdirectories. [2] - Add missing CLEANFILES for index.html and schedule.html. Suggested by; wosch [1] Reported by: wosch [1], [2] Sponsored by: The FreeBSD Foundation Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Fri Oct 6 14:22:45 2017 (r51067) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/Makefile Fri Oct 6 16:53:20 2017 (r51068) @@ -80,7 +80,9 @@ D+= relnotes MAN4PAGES?= ${MAN4DIR}/*.4 ${MAN4DIR}/man4.*/*.4 ARCHLIST?= ${.CURDIR}/../../share/misc/dev.archlist.txt -CLEANFILES+= dev-auto.ent +CLEANFILES+= dev-auto.ent \ + index.html \ + schedule.html MAN2HWNOTES_CMD=${.CURDIR}/../../share/misc/man2hwnotes.pl .if defined(HWNOTES_MI) @@ -90,14 +92,14 @@ MAN2HWNOTES_FLAGS= -c .endif dev-auto.ent: - ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET} ${MAN4PAGES} + ${PERL} ${MAN2HWNOTES_CMD} ${MAN2HWNOTES_FLAGS} -a ${ARCHLIST} -o ${.TARGET}.tmp ${MAN4PAGES} + ${MV} ${.TARGET}.tmp ${.TARGET} -beforebuild: dev-auto.ent - +.if make(clean) beforeclean: -.for _SD in ${D} - ${MAKE} -C ${_SD} DOCINSTALLDIR=${DOCINSTALLDIR} clean -.endfor +SUBDIR+= ${D} +.include "${DOC_PREFIX}/share/mk/doc.subdir.mk" +.endif beforeinstall: .for _SD in ${D} Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile Fri Oct 6 14:22:45 2017 (r51067) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/errata/Makefile Fri Oct 6 16:53:20 2017 (r51068) @@ -21,7 +21,6 @@ SRCS?= errata.xml DATA+= ${DOC}.html -beforeclean: CLEANFILES+= ${DOC}.html \ ${DOC}.txt \ catalog-cwd.xml \ Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile Fri Oct 6 14:22:45 2017 (r51067) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/hardware/Makefile Fri Oct 6 16:53:20 2017 (r51068) @@ -21,7 +21,6 @@ SRCS?= hardware.xml DATA+= ${DOC}.html -beforeclean: CLEANFILES+= ${DOC}.html \ ${DOC}.txt \ catalog-cwd.xml \ Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile Fri Oct 6 14:22:45 2017 (r51067) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/readme/Makefile Fri Oct 6 16:53:20 2017 (r51068) @@ -21,7 +21,6 @@ SRCS?= readme.xml DATA+= ${DOC}.html -beforeclean: CLEANFILES+= ${DOC}.html \ ${DOC}.txt \ catalog-cwd.xml \ Modified: head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile ============================================================================== --- head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Fri Oct 6 14:22:45 2017 (r51067) +++ head/en_US.ISO8859-1/htdocs/releases/12.0R/relnotes/Makefile Fri Oct 6 16:53:20 2017 (r51068) @@ -21,7 +21,6 @@ SRCS?= relnotes.xml DATA+= ${DOC}.html -beforeclean: CLEANFILES+= ${DOC}.html \ ${DOC}.txt \ catalog-cwd.xml \ From owner-svn-doc-head@freebsd.org Fri Oct 6 16:54:07 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 76C94E3BA96; Fri, 6 Oct 2017 16:54:07 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [96.47.72.132]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "freefall.freebsd.org", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 503D4660E7; Fri, 6 Oct 2017 16:54:07 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Received: from FreeBSD.org (freefall.freebsd.org [IPv6:2610:1c1:1:6074::16:84]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by freefall.freebsd.org (Postfix) with ESMTPS id 3F2415804; Fri, 6 Oct 2017 16:54:06 +0000 (UTC) (envelope-from gjb@FreeBSD.org) Date: Fri, 6 Oct 2017 16:54:04 +0000 From: Glen Barber To: Wolfram Schneider Cc: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: Re: svn commit: r51056 - head/en_US.ISO8859-1/htdocs/releases/12.0R Message-ID: <20171006165404.GL49395@FreeBSD.org> References: <201710052009.v95K9WUj038120@repo.freebsd.org> <20171005201225.GH49395@FreeBSD.org> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="PpocKf6TCvdC9BKE" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.8.2 (2017-04-18) X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Oct 2017 16:54:07 -0000 --PpocKf6TCvdC9BKE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Oct 06, 2017 at 03:12:43PM +0200, Wolfram Schneider wrote: > On 6 October 2017 at 11:15, Wolfram Schneider wrote: > > On 5 October 2017 at 22:12, Glen Barber wrote: > >> On Thu, Oct 05, 2017 at 08:09:32PM +0000, Glen Barber wrote: > >>> Author: gjb > >>> Date: Thu Oct 5 20:09:32 2017 > >>> New Revision: 51056 > >>> URL: https://svnweb.freebsd.org/changeset/doc/51056 > >>> > >>> Log: > >>> Comment .ORDER lines, breaking the build. > >>> > >> > >> This now builds properly on build-web. Sorry for the noise. > > > > The build still fails for me: > > > > $ cd en_US.ISO8859-1/htdocs/releases/12.0R/ > > $ make clean && make all >=20 > PS: if you run `make all' twice it will pass. This is another issue - > after a failure of man2hwnotes.pl the script should not left any > files, and a second run has to rebuild them. >=20 These should be fixed now. Thank you for the report (and the suggestion for dev-auto.ent). Glen --PpocKf6TCvdC9BKE Content-Type: application/pgp-signature; name="signature.asc" -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEVVuz/A7vpH93hEhKuWzd6q+LXtAFAlnXtSwACgkQuWzd6q+L XtAgMQ//bbDB03RQDA1hYphOvcGSLou/T3S9pKw0CUw1TL2zJ2iTDdyjbBRgoWDG 4HtKMrYHowfR7lyGVHuPbxfppSIESYVXrOZPQ9yzkkFcipJipV+dKgUkD8GkwZS9 IOUod5w4D97BC+0vDc0SGCt1UgwmSYm41R5D4AD0uWEyXxwhYVfBTXPw0YMYMuzf /nBSz6xVTYiCS7TqPiBaVyGCK0i5hu1DP7tAegr0WTQpOLO2Xk/eui0NbxAYyKzf c0woJ8I2sDBudpw/envAwcaYegdCMtBg4xqpzNJL93rGV3Y7tfls+i1AHeia/LGc BuAkulxVsZdfLcOiLpJOvsnjknCphxrQzSD01Cl+dgjpBP5YL+ECm+cnE/X/pbA4 nWkVF7eluhLe+uPUtl8tjz3dtmL7gaAw270NloQWTND0wbJmA8VXzo3Fy7b5ufDs Ao1TCQk2edD5+hmaGCs0TZjFpS4onGHunEPGsIyvr+bkgWr1bKEJtVpCC9YmFxdD 5OfBX3+xL5gZ/QEHrii2txxF/3ZRiOgfSib5y83/RIY4f6HtO91Jq2EivKQTHcZ0 Ig5wpbBxJSGP0l0EWnGUF3C+Le7j73a4nxU22TcB8OYxEGxp4SjdBlPGl+0P5rfU ldZHwzNDprFd9hN5oQwJFHvtqOi2pi6iJUIjVxFVHbold2btZTY= =NrJU -----END PGP SIGNATURE----- --PpocKf6TCvdC9BKE-- From owner-svn-doc-head@freebsd.org Sat Oct 7 08:41:42 2017 Return-Path: Delivered-To: svn-doc-head@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 2BFCBE323DE; Sat, 7 Oct 2017 08:41:42 +0000 (UTC) (envelope-from jkois@FreeBSD.org) Received: from repo.freebsd.org (repo.freebsd.org [IPv6:2610:1c1:1:6068::e6a:0]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 08F1864F2C; Sat, 7 Oct 2017 08:41:41 +0000 (UTC) (envelope-from jkois@FreeBSD.org) Received: from repo.freebsd.org ([127.0.1.37]) by repo.freebsd.org (8.15.2/8.15.2) with ESMTP id v978fea7066291; Sat, 7 Oct 2017 08:41:40 GMT (envelope-from jkois@FreeBSD.org) Received: (from jkois@localhost) by repo.freebsd.org (8.15.2/8.15.2/Submit) id v978feWa066285; Sat, 7 Oct 2017 08:41:40 GMT (envelope-from jkois@FreeBSD.org) Message-Id: <201710070841.v978feWa066285@repo.freebsd.org> X-Authentication-Warning: repo.freebsd.org: jkois set sender to jkois@FreeBSD.org using -f From: Johann Kois Date: Sat, 7 Oct 2017 08:41:40 +0000 (UTC) To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r51069 - in head/de_DE.ISO8859-1: htdocs htdocs/releases htdocs/security share/xml X-SVN-Group: doc-head X-SVN-Commit-Author: jkois X-SVN-Commit-Paths: in head/de_DE.ISO8859-1: htdocs htdocs/releases htdocs/security share/xml X-SVN-Commit-Revision: 51069 X-SVN-Commit-Repository: doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-doc-head@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: SVN commit messages for the doc tree for head List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Oct 2017 08:41:42 -0000 Author: jkois Date: Sat Oct 7 08:41:40 2017 New Revision: 51069 URL: https://svnweb.freebsd.org/changeset/doc/51069 Log: MFde r51033 - FreeBSD 10.4-RELEASE Modified: head/de_DE.ISO8859-1/htdocs/index.xsl head/de_DE.ISO8859-1/htdocs/releases/index.xml head/de_DE.ISO8859-1/htdocs/security/security.xml head/de_DE.ISO8859-1/htdocs/where.xml head/de_DE.ISO8859-1/share/xml/navibar.l10n.ent head/de_DE.ISO8859-1/share/xml/news.xml Modified: head/de_DE.ISO8859-1/htdocs/index.xsl ============================================================================== --- head/de_DE.ISO8859-1/htdocs/index.xsl Fri Oct 6 16:53:20 2017 (r51068) +++ head/de_DE.ISO8859-1/htdocs/index.xsl Sat Oct 7 08:41:40 2017 (r51069) @@ -6,7 +6,7 @@ Produktion: &rel.current;, &rel0.current;, - &rel1.current; + &rel1.current;, + &rel2.current;

Test:

ja +

+ zh_CN

zh_TW Modified: head/de_DE.ISO8859-1/htdocs/releases/index.xml ============================================================================== --- head/de_DE.ISO8859-1/htdocs/releases/index.xml Fri Oct 6 16:53:20 2017 (r51068) +++ head/de_DE.ISO8859-1/htdocs/releases/index.xml Sat Oct 7 08:41:40 2017 (r51069) @@ -2,7 +2,7 @@ - + ]> @@ -70,7 +70,7 @@

Produktion (alt)

Release &rel1.current; (April 2016) +

Release &rel1.current; (Oktober 2017) Announcement : Release Notes : @@ -80,6 +80,17 @@ Errata : Checksums

+ +

Release &rel2.current; (April 2016) + + Announcement : + Release Notes : + Installation Instructions : + Hardware Notes : + Readme : + Errata : + Checksums +

Modified: head/de_DE.ISO8859-1/htdocs/security/security.xml ============================================================================== --- head/de_DE.ISO8859-1/htdocs/security/security.xml Fri Oct 6 16:53:20 2017 (r51068) +++ head/de_DE.ISO8859-1/htdocs/security/security.xml Sat Oct 7 08:41:40 2017 (r51069) @@ -2,7 +2,7 @@ - + ]> @@ -159,7 +159,7 @@

Marius Strobl <marius@FreeBSD.org>	なし	なし	なし	2018 年 4 月 30 日	2018 年 10 月 31 日
releng/10.3	Extended	2016 年 4 月 4 日	2018 年 4 月 30 日
releng/10.4	10.4-RELEASE	Normal	2017 年 10 月 3 日	2018 年 10 月 31 日
stable/11

インストーライメージ	仮想マシンイメージ	SD カードイメージ	文書
+ + amd64 + i386 + ia64 + powerpc + powerpc64 + sparc64 + +	+ + README + amd64 + i386 + +	+ + BEAGLEBONE + CUBOX-HUMMINGBOARD + GUMSTIX + RPI-B + PANDABOARD + WANDBOARD + +	+ + リリース: &rel2.current.date; + リリースノート + Readme + ハードウェア互換リスト + インストールガイド + Errata + 署名済チェックサム
n/a	n/a	n/a	30. April 2018	31. Oktober 2018
releng/10.3	4. April 2016	30. April 2018
releng/10.4	10.4-RELEASE	Normal	3. Oktober 2017	31. Oktober 2018
stable/11	n/a	- Released: April 2016 + Released: Oktober 2017 Release Notes Readme Hardware Compatibility List Installation Instructions Errata Signed Checksums + +

FreeBSD ハンガリー語ドキュメンテーションプロジェクト

Contents

How to Donate

FreeBSD Summer of Code 2005 in the Press

FreeBSD/ARM mailing list

Dedication

Availability

Download

Support

Acknowledgments

FreeBSD 10.4-RELEASE Errata

The FreeBSD Project

FreeBSD 10.4-RELEASE Errata

The FreeBSD Project

&os; &rel2.current;-RELEASE

Produktion (alt)

&os; &rel2.current;-RELEASE