Date: Sun, 29 Apr 2018 11:49:19 -0700 From: Mark Millard <marklmi26-fbsd@yahoo.com> To: uboot@FreeBSD.org Subject: FreeBSD Port: sysutils/u-boot-sinovoip-bpi-m3 2018.03: "USB0: data abort" after "starting USB" Message-ID: <55EB76ED-44CB-4AC3-8489-72F4F9E90AFC@yahoo.com>
next in thread | raw e-mail | index | archive | help
Unless I have missed something that I should do, it appears to me that BPI-M3's are not working with the latest sysutils/u-boot-sinovoip-bpi-m3 (and so the latest sysutils/u-boot-master ). The following is taken from where I first sent the original note: https://lists.freebsd.org/pipermail/freebsd-arm/2018-April/017864.html > After upgrading a Pine64+ 2GB to head -r333079 > from a version from late last year/early this > year, I tried doing so for a BPI-M3, also last > updated in that general time frame. > > But what I get is repeated resets, each after > a "USB0: data abort" (nothing is plugged > into a USB port). > > "The loading Environment from" may indicate an > earlier, separate problem from the data abort. > > > resetting ... > > U-Boot SPL 2018.03 (Apr 06 2018 - 04:41:31 +0000) > DRAM: 2048 MiB > Trying to boot from MMC1 > > > U-Boot 2018.03 (Apr 06 2018 - 04:41:31 +0000) Allwinner Technology > > CPU: Allwinner A83T (SUN8I 1673) > Model: Allwinner A83T BananaPi M3 Board v1.2 > DRAM: 2 GiB > MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 > Loading Environment from FAT... Unable to use mmc 1:0... Failed (-5) > Loading Environment from MMC... *** Warning - bad CRC, using default environment > > Failed (-5) > In: serial > Out: serial > Err: serial > Net: No ethernet found. > starting USB... > USB0: data abort > pc : [<bff8fe3e>] lr : [<bff8fe21>] > reloc pc : [<4a01be3e>] lr : [<4a01be21>] > sp : bbf51c40 ip : bbf5b4ec fp : 00000002 > r10: bffb5058 r9 : bbf53ee0 r8 : 00000000 > r7 : ffffffff r6 : bbf5a73c r5 : bffb319c r4 : bbf5a550 > r3 : ffffffff r2 : 01c00004 r1 : ffff3f8f r0 : 00000000 > Flags: nZCv IRQs off FIQs off Mode SVC_32 > Resetting CPU ... > > resetting ... > > > > Details of what was used to put the updated u-boot > in place: > > # pkg info u-boot-sinovoip-bpi-m3-2018.03 > u-boot-sinovoip-bpi-m3-2018.03 > Name : u-boot-sinovoip-bpi-m3 > Version : 2018.03 > Installed on : Fri Apr 13 21:25:08 2018 PDT > Origin : sysutils/u-boot-sinovoip-bpi-m3 > Architecture : FreeBSD:12:* > Prefix : /usr/local > Categories : sysutils > Licenses : GPLv2 > Maintainer : > uboot at FreeBSD.org > > WWW : UNKNOWN > Comment : Cross-build das u-boot for model sinovoip-bpi-m3 > Annotations : > repo_type : binary > repository : custom > Flat size : 851KiB > Description : > U-Boot loader for Banana Pi M3. > > To install this bootloader on an sdcard just do : > dd if=/usr/local/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync > > This version is patched so that: > * ELF and API features are enabled. > * The default environment is trimmed to just what's needed to boot. > * The saveenv command writes to the file u-boot.env on the FAT partition. > * The DTB file name is chosen based on the board model and passed to ubldr.bin > using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on > the FreeBSD partition. > * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition > to address 0x42000000, and launches it. > > For information about running FreeBSD on Allwinner boards, see > > https://wiki.freebsd.org/FreeBSD/arm/Allwinner > > > For general information about U-Boot see WWW: > http://www.denx.de/wiki/U-Boot === Mark Millard marklmi26-fbsd at yahoo.com ( dsl-only.net went away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55EB76ED-44CB-4AC3-8489-72F4F9E90AFC>