Date: Sat, 6 Oct 2018 10:08:18 -0400 From: "J. Altman" <freebsd@chthonixia.net> To: freebsd-x11@freebsd.org Subject: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=231884 Message-ID: <20181006140818.GA5406@whisperer.chthonixia.net>
next in thread | raw e-mail | index | archive | help
Hello, list-members... Regarding the issue expressed in the link contained in the subject line: Me Too. Here is the info on the card that worked until today, Saturday, October 6 2018: vgapci0@pci0:4:0:0: class=0x030000 card=0x304e1682 chip=0x68e01002 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]' device = 'Park [Mobility Radeon HD 5430/5450/5470]' class = display subclass = VGA Xorg is current from ports. uname -a: FreeBSD whisperer.chthonixia.net 11.2-RELEASE-p4 FreeBSD 11.2-RELEASE-p4 #0 r339210: Fri Oct 5 10:44:39 EDT 2018 root@whisperer.chthonixia.net:/usr/obj/usr /src/sys/WHISPERER amd64 (NB: regarding uname -a, since it may be of interest...I updated the ati driver from ports sometime prior to system update as indicated in uname -a; prior to the system update, the ati driver worked fine...for both the updated driver and the previous ati driver. In my experience, whatever this is, occurred after the world/kernel upgrade...to reiterate, it occurred on my machine *after* the update to the ati driver....which I think was Thursday, October 4....but perhaps sooner? Anyway, JIC it has relevance.) What else....oh, yeah: none of the suggestions in the relevant thread have worked....none of the drm-* possibilities enable startx to succeed; and the error I receive is this: "drmn0: error: No GEM object associated to handle 0x000004B0, can't create framebuffer" I take it the 0x0.... is associated with the particular card I use? Further to if it's relevant, since my question below may be the easier route: CPU: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G (3393.72-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> Structured Extended Features=0x9<FSGSBASE,BMI1> XSAVE Features=0x1<XSAVEOPT> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics Perhaps it is time to try, again, to get this integrated GPU to work...however, my past efforts have failed, always leading to a lack of a useful display....at least, with the current card, I can use a B&W console even though I cannot use X. So, advice is welcome: should I try to use the Kaveri Radeon R7 AGPU, or troubleshoot the PCI Radeon? Thank you for any advice, and for the many hours of hard work put into the AMD graphics stackenstein :) Best regards, Joe Altman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20181006140818.GA5406>