Date: Sun, 13 Oct 2019 08:10:40 -0500 From: Mike Karels <mike@karels.net> To: Ian Lepore <ian@freebsd.org> Cc: Glen Barber <gjb@freebsd.org>, Emmanuel Vadot <manu@bidouilliste.com>, freebsd-arm@freebsd.org Subject: Re: FreeBSD 12.1-BETA3 won't boot on Beaglebone Black Message-ID: <201910131310.x9DDAev6075299@mail.karels.net> In-Reply-To: Your message of Tue, 08 Oct 2019 19:18:25 -0500.
next in thread | raw e-mail | index | archive | help
Top-posting to avoid the search: has anyone looked at this? Any thoughts on where the problem might lie? Any chance of getting it fixed for 12.1? I could do something like a driver bisection, but a full bisection might be a bit much on this platform. Thanks, Mike > To: Ian Lepore <ian@freebsd.org> > cc: Glen Barber <gjb@freebsd.org>, > Emmanuel Vadot <manu@bidouilliste.com>, freebsd-arm@freebsd.org > From: Mike Karels <mike@karels.net> > Subject: Re: FreeBSD 12.1-BETA3 won't boot on Beaglebone Black > Date: Tue, 08 Oct 2019 19:18:25 -0500 > I trimmed most of the context, the quoting was getting rather deep. > Responding to multiple messages... > > > > > I re-tested 12.1-BETA3 on my BeagleBone Black, and do not see any > > > > > boot > > > > > failures. This is with a class 10 SD card. > > > > > > > > > > Glen > > > > > > > > > > > > > Even when using the button to force booting from sdcard ? > > > > > > > > > > Huh. Yeah, I do see 'sdhci_ti1-slot0: Controller timeout' when using > > > the button. > > > > > > Glen > > > > > BTW, those controller timeouts are non-fatal. If you let it keep > > trying, eventually the board finishes booting (it takes over 2 > > minutes). But you can't access the emmc. If you want a workaround for > > faster booting until the problem is fixed, add dev.sdhci_ti.1.timeout=1 > > to /boot/loader.conf. > > -- Ian > - I have tried multiple SD cards, and they boot other releases; as noted, > they are not the problem. > - I hadn't waited long enough / for enough repeats of the timeout. Looks > like it takes 16 failures, but it does in fact boot. It then prints > mmc1: No compatible cards found on bus > and there is no mmcsd1 in /dev. > - Setting the timeout to 1 makes booting tolerable. I'll keep BETA3 > running now. > Thanks, > Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201910131310.x9DDAev6075299>