From owner-freebsd-usb@freebsd.org Sun Mar 10 21:00:57 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id D333D1541B67 for ; Sun, 10 Mar 2019 21:00:56 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from mailman.ysv.freebsd.org (mailman.ysv.freebsd.org [IPv6:2001:1900:2254:206a::50:5]) by mx1.freebsd.org (Postfix) with ESMTP id 6EBDC8E2EE for ; Sun, 10 Mar 2019 21:00:56 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: by mailman.ysv.freebsd.org (Postfix) id 327D21541B66; Sun, 10 Mar 2019 21:00:56 +0000 (UTC) Delivered-To: usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 204001541B65 for ; Sun, 10 Mar 2019 21:00:56 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from mxrelay.ysv.freebsd.org (mxrelay.ysv.freebsd.org [IPv6:2001:1900:2254:206a::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) server-signature RSA-PSS (4096 bits) client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.ysv.freebsd.org", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id B41458E2EC for ; Sun, 10 Mar 2019 21:00:55 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mxrelay.ysv.freebsd.org (Postfix) with ESMTPS id 0236E206FD for ; Sun, 10 Mar 2019 21:00:55 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from kenobi.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id x2AL0st2065017 for ; Sun, 10 Mar 2019 21:00:54 GMT (envelope-from bugzilla-noreply@FreeBSD.org) Received: (from bugzilla@localhost) by kenobi.freebsd.org (8.15.2/8.15.2/Submit) id x2AL0sDp065000 for usb@FreeBSD.org; Sun, 10 Mar 2019 21:00:54 GMT (envelope-from bugzilla-noreply@FreeBSD.org) Message-Id: <201903102100.x2AL0sDp065000@kenobi.freebsd.org> X-Authentication-Warning: kenobi.freebsd.org: bugzilla set sender to bugzilla-noreply@FreeBSD.org using -f From: bugzilla-noreply@FreeBSD.org To: usb@FreeBSD.org Subject: Problem reports for usb@FreeBSD.org that need special attention Date: Sun, 10 Mar 2019 21:00:54 +0000 MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" X-Content-Filtered-By: Mailman/MimeDel 2.1.29 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 10 Mar 2019 21:00:57 -0000 To view an individual PR, use: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=(Bug Id). The following is a listing of current problems submitted by FreeBSD users, which need special attention. These represent problem reports covering all versions including experimental development code and obsolete releases. Status | Bug Id | Description ------------+-----------+--------------------------------------------------- Open | 213877 | xhci reset causes panic on SuperMicro A1SRi-2758F Open | 234578 | Support for Sierra Wireless EM7455 modem 2 problems total for which you should take action. From owner-freebsd-usb@freebsd.org Mon Mar 11 10:32:18 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 62CDE153B9B0 for ; Mon, 11 Mar 2019 10:32:18 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mailman.ysv.freebsd.org (mailman.ysv.freebsd.org [IPv6:2001:1900:2254:206a::50:5]) by mx1.freebsd.org (Postfix) with ESMTP id DD0648F6B1 for ; Mon, 11 Mar 2019 10:32:17 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: by mailman.ysv.freebsd.org (Postfix) id 9BDCE153B9AD; Mon, 11 Mar 2019 10:32:17 +0000 (UTC) Delivered-To: usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 89929153B9AC for ; Mon, 11 Mar 2019 10:32:17 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mxrelay.ysv.freebsd.org (mxrelay.ysv.freebsd.org [IPv6:2001:1900:2254:206a::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) server-signature RSA-PSS (4096 bits) client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.ysv.freebsd.org", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 2572E8F6AF for ; Mon, 11 Mar 2019 10:32:17 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mxrelay.ysv.freebsd.org (Postfix) with ESMTPS id 5E00227DD9 for ; Mon, 11 Mar 2019 10:32:16 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id x2BAWGe1079491 for ; Mon, 11 Mar 2019 10:32:16 GMT (envelope-from bugzilla-noreply@freebsd.org) Received: (from www@localhost) by kenobi.freebsd.org (8.15.2/8.15.2/Submit) id x2BAWGop079489 for usb@FreeBSD.org; Mon, 11 Mar 2019 10:32:16 GMT (envelope-from bugzilla-noreply@freebsd.org) X-Authentication-Warning: kenobi.freebsd.org: www set sender to bugzilla-noreply@freebsd.org using -f From: bugzilla-noreply@freebsd.org To: usb@FreeBSD.org Subject: [Bug 140893] [urtw] [usb8] WPA2 not working on rtl8187b Date: Mon, 11 Mar 2019 10:32:16 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: usb X-Bugzilla-Version: 8.0-RELEASE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: avos@freebsd.org X-Bugzilla-Status: Closed X-Bugzilla-Resolution: Unable to Reproduce X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: usb@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 11 Mar 2019 10:32:18 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D140893 --- Comment #4 from Andriy Voskoboinyk --- strict -> struct (was autocorrected) --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-usb@freebsd.org Mon Mar 11 10:31:05 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 14DE7153B7E3 for ; Mon, 11 Mar 2019 10:31:05 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mailman.ysv.freebsd.org (mailman.ysv.freebsd.org [IPv6:2001:1900:2254:206a::50:5]) by mx1.freebsd.org (Postfix) with ESMTP id 9EB208F46B for ; Mon, 11 Mar 2019 10:31:04 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: by mailman.ysv.freebsd.org (Postfix) id 58773153B7E2; Mon, 11 Mar 2019 10:31:04 +0000 (UTC) Delivered-To: usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 46F6A153B7E1 for ; Mon, 11 Mar 2019 10:31:04 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mxrelay.ysv.freebsd.org (mxrelay.ysv.freebsd.org [IPv6:2001:1900:2254:206a::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) server-signature RSA-PSS (4096 bits) client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.ysv.freebsd.org", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id DAA4C8F466 for ; Mon, 11 Mar 2019 10:31:03 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mxrelay.ysv.freebsd.org (Postfix) with ESMTPS id 2FC3427DA4 for ; Mon, 11 Mar 2019 10:31:03 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id x2BAV3Gs073912 for ; Mon, 11 Mar 2019 10:31:03 GMT (envelope-from bugzilla-noreply@freebsd.org) Received: (from www@localhost) by kenobi.freebsd.org (8.15.2/8.15.2/Submit) id x2BAV3ob073911 for usb@FreeBSD.org; Mon, 11 Mar 2019 10:31:03 GMT (envelope-from bugzilla-noreply@freebsd.org) X-Authentication-Warning: kenobi.freebsd.org: www set sender to bugzilla-noreply@freebsd.org using -f From: bugzilla-noreply@freebsd.org To: usb@FreeBSD.org Subject: [Bug 140893] [urtw] [usb8] WPA2 not working on rtl8187b Date: Mon, 11 Mar 2019 10:31:02 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: usb X-Bugzilla-Version: 8.0-RELEASE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: avos@freebsd.org X-Bugzilla-Status: Closed X-Bugzilla-Resolution: Unable to Reproduce X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: usb@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_status cc resolution Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 11 Mar 2019 10:31:05 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D140893 Andriy Voskoboinyk changed: What |Removed |Added ---------------------------------------------------------------------------- Status|Open |Closed CC| |avos@freebsd.org Resolution|--- |Unable to Reproduce --- Comment #3 from Andriy Voskoboinyk --- Cannot reproduce on recent HEAD; since it was tested few years ago during 'net80211 without strict ifnet' conversion (see https://wiki.freebsd.org/projects/ifnet/net80211) I don't think the issue is still relevant. If that's not true - feel free to reopen the PR. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-usb@freebsd.org Tue Mar 12 20:49:33 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 05B18153DF55 for ; Tue, 12 Mar 2019 20:49:33 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [IPv6:2607:f3e0:0:1::12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smarthost1.sentex.ca", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4629F84F64 for ; Tue, 12 Mar 2019 20:49:22 +0000 (UTC) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (pyroxene.sentex.ca [199.212.134.18]) by smarthost1.sentex.ca (8.15.2/8.15.2) with ESMTP id x2CKnKhL015209; Tue, 12 Mar 2019 16:49:20 -0400 (EDT) (envelope-from mike@sentex.net) To: freebsd-usb@FreeBSD.org From: Mike Tancsa Subject: strange USB timing issue with u3g Openpgp: preference=signencrypt Autocrypt: addr=mike@sentex.net; prefer-encrypt=mutual; keydata= mQENBEzcA24BCACpwI/iqOrs0GfQSfhA1v6Z8AcXVeGsRyKEKUpxoOYxXWc2z3vndbYlIP6E YJeifzKhS/9E+VjhhICaepLHfw865TDTUPr5D0Ed+edSsKjlnDtb6hfNJC00P7eoiuvi85TW F/gAxRY269A5d856bYrzLbkWp2lKUR3Bg6NnORtflGzx9ZWAltZbjYjjRqegPv0EQNYcHqWo eRpXilEo1ahT6nmOU8V7yEvT2j4wlLcQ6qg7w+N/vcBvyd/weiwHU+vTQ9mT61x5/wUrQhdw 2gJHeQXeDGMJV49RT2EEz+QVxaf477eyWsdQzPVjAKRMT3BVdK8WvpYAEfBAbXmkboOxABEB AAG0HG1pa2UgdGFuY3NhIDxtaWtlQHNlbnRleC5jYT6JATgEEwECACIFAkzcA24CGwMGCwkI BwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEJXHwM2kc8rX+sMH/2V6pTBKsQ5mpWWLgs6wVP2k BC+6r/YKNXv9Rw/PrC6+9hTbgA+sSjJ+8gxsCbJsOQXZrxF0x3l9oYdYfuKcwdwXFX1/FS8p HfBeDkmlH+dI709xT9wgrR4dS5aMmKp0scPrXPIAKiYVOHjOlNItcLYTEEWEFBepheEVsgmk GrNbcrHwOx/u4igUQ8vcpyXPyUki+BsftPw8ZQvBU887igh0OxaCR8AurJppQ5UQd63r81cX E1ZjoFoWCaGK/SjPb/OhpYpu5swoZIhOxQbn7OtakYPsDd5t2A5KhvjI8BMTnd5Go+2xsCmr jlIEq8Bi29gCcfQUvNiClevi13ifmnm5AQ0ETNwDbgEIALWGNJHRAhpd0A4vtd3G0oRqMBcM FGThQr3qORmEBTPPEomTdBaHcn+Xl+3YUvTBD/67/mutWBwgp2R5gQOSqcM7axvgMSHbKqBL 9sd1LsLw0UT2O5AYxv3EwzhG84pwRg3XcUqvWA4lA8tIj/1q4Jzi5qOkg1zxq4W9qr9oiYK5 bBR638JUvr3eHMaz/Nz+sDVFgwHmXZj3M6aE5Ce9reCGbvrae7H5D5PPvtT3r22X8SqfVAiO TFKedCf/6jbSOedPN931FJQYopj9P6b3m0nI3ZiCDVSqeyOAIBLzm+RBUIU3brzoxDhYR8pz CJc2sK8l6YjqivPakrD86bFDff8AEQEAAYkBHwQYAQIACQUCTNwDbgIbDAAKCRCVx8DNpHPK 1+iQB/99aqNtez9ZTBWELj269La8ntuRx6gCpzfPXfn6SDIfTItDxTh1hrdRVP5QNGGF5wus N4EMwXouskva1hbFX3Pv72csYSxxEJXjW16oV8WK4KjKXoskLg2RyRP4uXqL7Mp2ezNtVY5F 9nu3fj4ydpHCSaqKy5xd70A8D50PfZsFgkrsa5gdQhPiGGEdxhq/XSeAAnZ4uVLJKarH+mj5 MEhgZPEBWkGrbDZpezl9qbFcUem/uT9x8FYT/JIztMVh9qDcdP5tzANW5J7nvgXjska+VFGY ryZK4SPDczh74mn6GI/+RBi7OUzXXPgpPBrhS5FByjwCqjjsSpTjTds+NGIY Organization: Sentex Communications Message-ID: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> Date: Tue, 12 Mar 2019 16:49:20 -0400 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.5.3 MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Content-Language: en-US X-Rspamd-Queue-Id: 4629F84F64 X-Spamd-Bar: ---- Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of mike@sentex.net designates 2607:f3e0:0:1::12 as permitted sender) smtp.mailfrom=mike@sentex.net X-Spamd-Result: default: False [-4.98 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-0.99)[-0.994,0]; RCVD_COUNT_TWO(0.00)[2]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; FROM_HAS_DN(0.00)[]; R_SPF_ALLOW(-0.20)[+ip6:2607:f3e0::/32]; TO_MATCH_ENVRCPT_ALL(0.00)[]; MIME_GOOD(-0.10)[text/plain]; TO_DN_NONE(0.00)[]; DMARC_NA(0.00)[sentex.net]; RCPT_COUNT_ONE(0.00)[1]; HAS_ORG_HEADER(0.00)[]; RCVD_TLS_LAST(0.00)[]; MX_GOOD(-0.01)[smtp.sentex.ca]; NEURAL_HAM_SHORT(-0.85)[-0.848,0]; IP_SCORE(-1.73)[ipnet: 2607:f3e0::/32(-4.95), asn: 11647(-3.60), country: CA(-0.09)]; RCVD_IN_DNSWL_LOW(-0.10)[2.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.0.0.0.0.0.0.0.0.e.3.f.7.0.6.2.list.dnswl.org : 127.0.5.1]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:11647, ipnet:2607:f3e0::/32, country:CA]; MID_RHS_MATCH_FROM(0.00)[]; FROM_EQ_ENVFROM(0.00)[] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 12 Mar 2019 20:49:33 -0000 I have a strange issue I started to see on RELENG11 and RELENG12 that I am not sure when it started or if its always been there.=C2=A0 On an PCEngines APU3, with an LTE modem that works with the u3g driver, it will fail to attach if the box does not boot up fast enough. So I am guessing something gets messed up in initialization and timing ? e.g. in loader.conf I have autoboot_delay=3D2 dcons_load=3D"YES" amdsbwd_load=3D"YES" u3g_load=3D"YES" beastie_disable=3D"YES" comconsole_speed=3D"115200" console=3D"comconsole" #hw.usb.debug=3D1 If I pause at the boot or make the delay say 10 seconds, the device often errors out. The device normally looks like this ugen2.1: at usbus2, cfg=3D0 md=3DHOST spd=3DHIGH (480= Mbps) pwr=3DSAVE (0mA) ugen1.1: at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH (480= Mbps) pwr=3DSAVE (0mA) ugen0.1: <0x1022 XHCI root HUB> at usbus0, cfg=3D0 md=3DHOST spd=3DSUPER (5.0Gbps) pwr=3DSAVE (0mA) ugen2.2: at usbus2, cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DSAVE (100mA) ugen1.2: at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DSAVE (100mA) ugen2.3: at usbus2, cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON (500mA) ugen2.3: at usbus2, cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON (500mA) =C2=A0 bLength =3D 0x0012 =C2=A0 bDescriptorType =3D 0x0001 =C2=A0 bcdUSB =3D 0x0200 =C2=A0 bDeviceClass =3D 0x0000=C2=A0 =C2=A0 bDeviceSubClass =3D 0x0000 =C2=A0 bDeviceProtocol =3D 0x0000 =C2=A0 bMaxPacketSize0 =3D 0x0040 =C2=A0 idVendor =3D 0x12d1 =C2=A0 idProduct =3D 0x1573 =C2=A0 bcdDevice =3D 0x0228 =C2=A0 iManufacturer =3D 0x0002=C2=A0 =C2=A0 iProduct =3D 0x0003=C2=A0 =C2=A0 iSerialNumber =3D 0x0004=C2=A0 <0123456712ABCA17> =C2=A0 bNumConfigurations =3D 0x0003 But about 50% of the time with a longer delay, at bootup time I get uhub4: 4 ports with 4 removable, self powered usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3D3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED usbd_req_re_enumerate: addr=3D3, set address failed! (USB_ERR_STALLED, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED vs ugen0.1: <0x1022 XHCI root HUB> at usbus0 ugen1.1: at usbus1 ugen2.1: at usbus2 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0= uhub1: on usbus1 uhub2: on usbus2 mmcsd0: 4GB at mmc0 50.0MHz/4bit/65535-block Trying to mount root from ufs:/dev/mmcsd0s1a [ro]... uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Starting file system checks: /dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s1a: clean, 386561 free (3113 frags, 47931 blocks, 0.1% fragmentation) ugen1.2: at usbus1 uhub3 on uhub1 uhub3: on usbus1 ugen2.2: at usbus2 uhub4 on uhub2 uhub4: on usbus2 /dev/mmcsd0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation= ) /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one uhub3: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered ugen2.3: at usbus2 u3g0 on uhub4 u3g0: on usbus2 u3g0: Found 5 ports. Enabling debug will make it fail.=C2=A0 Any idea what it might be or how = I can tweak it to it more reliably initializes ? I first start to notice it when I added a few more klds at boot time. This made the boot up process that much longer that I would run into this issue periodically. =C2=A0=C2=A0=C2=A0 ---Mike --=20 ------------------- Mike Tancsa, tel +1 519 651 3400 x203 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada =20 From owner-freebsd-usb@freebsd.org Tue Mar 12 21:44:12 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 4B896153F985 for ; Tue, 12 Mar 2019 21:44:12 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (turbocat.net [88.99.82.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 2098787968 for ; Tue, 12 Mar 2019 21:44:10 +0000 (UTC) (envelope-from hps@selasky.org) Received: from hps2016.home.selasky.org (unknown [176.74.212.121]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id 2358A260197; Tue, 12 Mar 2019 22:44:03 +0100 (CET) Subject: Re: strange USB timing issue with u3g To: Mike Tancsa , freebsd-usb@FreeBSD.org References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> From: Hans Petter Selasky Message-ID: <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> Date: Tue, 12 Mar 2019 22:43:39 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 MIME-Version: 1.0 In-Reply-To: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-US Content-Transfer-Encoding: 8bit X-Rspamd-Queue-Id: 2098787968 X-Spamd-Bar: ------ Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of hps@selasky.org designates 88.99.82.50 as permitted sender) smtp.mailfrom=hps@selasky.org X-Spamd-Result: default: False [-6.50 / 15.00]; RCVD_VIA_SMTP_AUTH(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+a:mail.turbocat.net]; MX_GOOD(-0.01)[mail.turbocat.net]; RCPT_COUNT_TWO(0.00)[2]; NEURAL_HAM_SHORT(-0.97)[-0.967,0]; FROM_EQ_ENVFROM(0.00)[]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:24940, ipnet:88.99.0.0/16, country:DE]; MID_RHS_MATCH_FROM(0.00)[]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-1.00)[-1.000,0]; FROM_HAS_DN(0.00)[]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[selasky.org]; TO_MATCH_ENVRCPT_SOME(0.00)[]; IP_SCORE(-3.22)[ip: (-9.49), ipnet: 88.99.0.0/16(-4.66), asn: 24940(-1.94), country: DE(-0.01)]; RCVD_COUNT_TWO(0.00)[2]; RCVD_TLS_ALL(0.00)[] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 12 Mar 2019 21:44:12 -0000 On 3/12/19 9:49 PM, Mike Tancsa wrote: > I have a strange issue I started to see on RELENG11 and RELENG12 that I > am not sure when it started or if its always been there.  On an > PCEngines APU3, with an LTE modem that works with the u3g driver, it > will fail to attach if the box does not boot up fast enough. So I am > guessing something gets messed up in initialization and timing ? > > e.g. in loader.conf I have > > autoboot_delay=2 > dcons_load="YES" > amdsbwd_load="YES" > u3g_load="YES" > beastie_disable="YES" > comconsole_speed="115200" > console="comconsole" > #hw.usb.debug=1 > > > If I pause at the boot or make the delay say 10 seconds, the device > often errors out. The device normally looks like this > > ugen2.1: at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen1.1: at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen0.1: <0x1022 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER > (5.0Gbps) pwr=SAVE (0mA) > ugen2.2: at usbus2, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (100mA) > ugen1.2: at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (100mA) > ugen2.3: at usbus2, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON (500mA) > > ugen2.3: at usbus2, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON (500mA) > >   bLength = 0x0012 >   bDescriptorType = 0x0001 >   bcdUSB = 0x0200 >   bDeviceClass = 0x0000  >   bDeviceSubClass = 0x0000 >   bDeviceProtocol = 0x0000 >   bMaxPacketSize0 = 0x0040 >   idVendor = 0x12d1 >   idProduct = 0x1573 >   bcdDevice = 0x0228 >   iManufacturer = 0x0002  >   iProduct = 0x0003  >   iSerialNumber = 0x0004  <0123456712ABCA17> >   bNumConfigurations = 0x0003 > > > But about 50% of the time with a longer delay, at bootup time I get > > uhub4: 4 ports with 4 removable, self powered > usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) > usbd_setup_device_desc: getting device descriptor at addr 3 failed, > USB_ERR_STALLED > > > vs > > ugen0.1: <0x1022 XHCI root HUB> at usbus0 > ugen1.1: at usbus1 > ugen2.1: at usbus2 > uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > uhub1: on usbus1 > uhub2: on usbus2 > mmcsd0: 4GB at mmc0 > 50.0MHz/4bit/65535-block > Trying to mount root from ufs:/dev/mmcsd0s1a [ro]... > uhub0: 4 ports with 4 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > Starting file system checks: > /dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/mmcsd0s1a: clean, 386561 free (3113 frags, 47931 blocks, 0.1% > fragmentation) > ugen1.2: at usbus1 > uhub3 on uhub1 > uhub3: > on usbus1 > ugen2.2: at usbus2 > uhub4 on uhub2 > uhub4: > on usbus2 > /dev/mmcsd0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/mmcsd0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation) > /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, > generating a new one > uhub3: 4 ports with 4 removable, self powered > uhub4: 4 ports with 4 removable, self powered > ugen2.3: at usbus2 > u3g0 on uhub4 > u3g0: 3> on usbus2 > u3g0: Found 5 ports. > > > Enabling debug will make it fail.  Any idea what it might be or how I > can tweak it to it more reliably initializes ? I first start to notice > it when I added a few more klds at boot time. This made the boot up > process that much longer that I would run into this issue periodically. > Hi, Maybe the device expects some kind of BIOS to enumerate it quickly and if not, goes into sleep mode. Try setting: hw.usb.ehci.no_hs=1 In /boot/loader.conf . Does this change anything? USB devices are not allowed to return with a STALL-PID on set-address messages, so this is violation of established USB standards. Maybe you need a USB wire-analyzer to nail this issue. There are a bunch of tunables for example: hw.usb.timings Which affect how the USB device is enumerated. Is your device running the latest firmware from HUAWEI? --HPS From owner-freebsd-usb@freebsd.org Wed Mar 13 14:47:09 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9C79F153564A for ; Wed, 13 Mar 2019 14:47:09 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [IPv6:2607:f3e0:0:1::12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smarthost1.sentex.ca", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 5C2128243D for ; Wed, 13 Mar 2019 14:47:08 +0000 (UTC) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (pyroxene.sentex.ca [199.212.134.18]) by smarthost1.sentex.ca (8.15.2/8.15.2) with ESMTP id x2DEl6Ok027754; Wed, 13 Mar 2019 10:47:06 -0400 (EDT) (envelope-from mike@sentex.net) Subject: Re: strange USB timing issue with u3g To: Hans Petter Selasky , freebsd-usb@FreeBSD.org References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> From: Mike Tancsa Openpgp: preference=signencrypt Autocrypt: addr=mike@sentex.net; prefer-encrypt=mutual; keydata= mQENBEzcA24BCACpwI/iqOrs0GfQSfhA1v6Z8AcXVeGsRyKEKUpxoOYxXWc2z3vndbYlIP6E YJeifzKhS/9E+VjhhICaepLHfw865TDTUPr5D0Ed+edSsKjlnDtb6hfNJC00P7eoiuvi85TW F/gAxRY269A5d856bYrzLbkWp2lKUR3Bg6NnORtflGzx9ZWAltZbjYjjRqegPv0EQNYcHqWo eRpXilEo1ahT6nmOU8V7yEvT2j4wlLcQ6qg7w+N/vcBvyd/weiwHU+vTQ9mT61x5/wUrQhdw 2gJHeQXeDGMJV49RT2EEz+QVxaf477eyWsdQzPVjAKRMT3BVdK8WvpYAEfBAbXmkboOxABEB AAG0HG1pa2UgdGFuY3NhIDxtaWtlQHNlbnRleC5jYT6JATgEEwECACIFAkzcA24CGwMGCwkI BwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEJXHwM2kc8rX+sMH/2V6pTBKsQ5mpWWLgs6wVP2k BC+6r/YKNXv9Rw/PrC6+9hTbgA+sSjJ+8gxsCbJsOQXZrxF0x3l9oYdYfuKcwdwXFX1/FS8p HfBeDkmlH+dI709xT9wgrR4dS5aMmKp0scPrXPIAKiYVOHjOlNItcLYTEEWEFBepheEVsgmk GrNbcrHwOx/u4igUQ8vcpyXPyUki+BsftPw8ZQvBU887igh0OxaCR8AurJppQ5UQd63r81cX E1ZjoFoWCaGK/SjPb/OhpYpu5swoZIhOxQbn7OtakYPsDd5t2A5KhvjI8BMTnd5Go+2xsCmr jlIEq8Bi29gCcfQUvNiClevi13ifmnm5AQ0ETNwDbgEIALWGNJHRAhpd0A4vtd3G0oRqMBcM FGThQr3qORmEBTPPEomTdBaHcn+Xl+3YUvTBD/67/mutWBwgp2R5gQOSqcM7axvgMSHbKqBL 9sd1LsLw0UT2O5AYxv3EwzhG84pwRg3XcUqvWA4lA8tIj/1q4Jzi5qOkg1zxq4W9qr9oiYK5 bBR638JUvr3eHMaz/Nz+sDVFgwHmXZj3M6aE5Ce9reCGbvrae7H5D5PPvtT3r22X8SqfVAiO TFKedCf/6jbSOedPN931FJQYopj9P6b3m0nI3ZiCDVSqeyOAIBLzm+RBUIU3brzoxDhYR8pz CJc2sK8l6YjqivPakrD86bFDff8AEQEAAYkBHwQYAQIACQUCTNwDbgIbDAAKCRCVx8DNpHPK 1+iQB/99aqNtez9ZTBWELj269La8ntuRx6gCpzfPXfn6SDIfTItDxTh1hrdRVP5QNGGF5wus N4EMwXouskva1hbFX3Pv72csYSxxEJXjW16oV8WK4KjKXoskLg2RyRP4uXqL7Mp2ezNtVY5F 9nu3fj4ydpHCSaqKy5xd70A8D50PfZsFgkrsa5gdQhPiGGEdxhq/XSeAAnZ4uVLJKarH+mj5 MEhgZPEBWkGrbDZpezl9qbFcUem/uT9x8FYT/JIztMVh9qDcdP5tzANW5J7nvgXjska+VFGY ryZK4SPDczh74mn6GI/+RBi7OUzXXPgpPBrhS5FByjwCqjjsSpTjTds+NGIY Organization: Sentex Communications Message-ID: Date: Wed, 13 Mar 2019 10:47:05 -0400 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.5.3 MIME-Version: 1.0 In-Reply-To: <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Content-Language: en-US X-Rspamd-Queue-Id: 5C2128243D X-Spamd-Bar: - Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of mike@sentex.net designates 2607:f3e0:0:1::12 as permitted sender) smtp.mailfrom=mike@sentex.net X-Spamd-Result: default: False [-1.43 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-0.20)[-0.204,0]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip6:2607:f3e0::/32]; NEURAL_HAM_LONG(-0.93)[-0.928,0]; MIME_GOOD(-0.10)[text/plain]; RCVD_TLS_LAST(0.00)[]; DMARC_NA(0.00)[sentex.net]; NEURAL_SPAM_SHORT(0.12)[0.116,0]; HAS_ORG_HEADER(0.00)[]; TO_MATCH_ENVRCPT_SOME(0.00)[]; MX_GOOD(-0.01)[cached: smtp.sentex.ca]; RCPT_COUNT_TWO(0.00)[2]; FROM_EQ_ENVFROM(0.00)[]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; RCVD_COUNT_TWO(0.00)[2]; MID_RHS_MATCH_FROM(0.00)[]; RCVD_IN_DNSWL_LOW(-0.10)[2.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.0.0.0.0.0.0.0.0.e.3.f.7.0.6.2.list.dnswl.org : 127.0.5.1] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 13 Mar 2019 14:47:09 -0000 On 3/12/2019 5:43 PM, Hans Petter Selasky wrote: > On 3/12/19 9:49 PM, Mike Tancsa wrote: >> > > Hi, > > Maybe the device expects some kind of BIOS to enumerate it quickly and > if not, goes into sleep mode. > > Try setting: > hw.usb.ehci.no_hs=3D1 > > In /boot/loader.conf . > > Does this change anything? usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_IOERROR, ignored) usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_IOERROR, ignored) seems to reliably come up with this setting on when loading u3g out of loader.conf and letting devd do it later. The other variable that can trigger it is if I load a bunch of other klds like umodem, ucom,uplcom and uftdi.=C2=A0 > > USB devices are not allowed to return with a STALL-PID on set-address > messages, so this is violation of established USB standards. Maybe you > need a USB wire-analyzer to nail this issue. > > There are a bunch of tunables for example: > hw.usb.timings Although testing a bit with hw.usb.timings.extra_power_up_time=3D990 seems to make the error on dmesg just up come up at a different, later point. setting hw.usb.timings.port_powerup_delay=3D1000 does seem to help!=C2=A0 At least I was able to boot up 50% of the time.=C2= =A0 Trying with 2000 however, does not seem to make it better.=C2=A0 still 50= /50 > > Which affect how the USB device is enumerated. > > Is your device running the latest firmware from HUAWEI? Not sure. I have never upgraded the firmware in these guys before. Manufacturer: Huawei Technologies Co., Ltd. Model: ME909u-523 Revision: 11.430.63.00.00 IMEI: xxxxx +GCAP: +CGSM Do you know of any references on how to do this ?=C2=A0 Looking at the AT= command manual AT^FOTADET OK ^FOTASTATE: 11 ^DEND: 1,33,IPV4 and tried again AT^FOTADET OK ^FOTASTATE: 11 ^FOTASTATE: 13,13 ^HCSQ: "LTE",50,41,94,10 ^HCSQ: "LTE",44,41,137,22 AT^FOTADLQ ^FOTADLQ: 1,"FIRMWARE1",0,0 I think 13 means "New version query failed" My guess is that I need to setup some specific APN data to talk to Huawei ?=C2=A0 The modem is not specifically designed for the carrier, so= I dont know if the carrier usually has stuff behind the scenes for such updates. Although the command AT^FWLOAD=3D This command is used to specify the upgrade type, transmit the upgrade file into the module using 1K-Xmodem, and start the upgrade. The following table lists the ports supported by the full and differential upgrades. So if I can find a firmware file, I can do an old school xmodem-1k upload. I will see if I can find one from Huawei. > > --HPS > > --=20 ------------------- Mike Tancsa, tel +1 519 651 3400 x203 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada =20 From owner-freebsd-usb@freebsd.org Wed Mar 13 15:00:11 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9DC011535BDA for ; Wed, 13 Mar 2019 15:00:11 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (turbocat.net [IPv6:2a01:4f8:c17:6c4b::2]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0C5CC82B76 for ; Wed, 13 Mar 2019 15:00:09 +0000 (UTC) (envelope-from hps@selasky.org) Received: from hps2016.home.selasky.org (unknown [176.74.212.121]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id E4EBB260306; Wed, 13 Mar 2019 16:00:07 +0100 (CET) Subject: Re: strange USB timing issue with u3g To: Mike Tancsa , freebsd-usb@FreeBSD.org References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> From: Hans Petter Selasky Message-ID: <7603c2a2-4227-7df1-b7f5-d7b654e6a5ee@selasky.org> Date: Wed, 13 Mar 2019 15:59:43 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-US Content-Transfer-Encoding: 8bit X-Rspamd-Queue-Id: 0C5CC82B76 X-Spamd-Bar: ----- Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of hps@selasky.org designates 2a01:4f8:c17:6c4b::2 as permitted sender) smtp.mailfrom=hps@selasky.org X-Spamd-Result: default: False [-5.87 / 15.00]; ARC_NA(0.00)[]; RCVD_VIA_SMTP_AUTH(0.00)[]; NEURAL_HAM_MEDIUM(-1.00)[-0.999,0]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+a:mail.turbocat.net]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[selasky.org]; TO_MATCH_ENVRCPT_SOME(0.00)[]; MX_GOOD(-0.01)[cached: mail.turbocat.net]; RCPT_COUNT_TWO(0.00)[2]; NEURAL_HAM_SHORT(-0.98)[-0.978,0]; IP_SCORE(-2.58)[ip: (-8.77), ipnet: 2a01:4f8::/29(-2.18), asn: 24940(-1.94), country: DE(-0.01)]; FROM_EQ_ENVFROM(0.00)[]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:24940, ipnet:2a01:4f8::/29, country:DE]; MID_RHS_MATCH_FROM(0.00)[]; RCVD_TLS_ALL(0.00)[]; RCVD_COUNT_TWO(0.00)[2] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 13 Mar 2019 15:00:11 -0000 On 3/13/19 3:47 PM, Mike Tancsa wrote: > On 3/12/2019 5:43 PM, Hans Petter Selasky wrote: >> On 3/12/19 9:49 PM, Mike Tancsa wrote: >>> >> >> Hi, >> >> Maybe the device expects some kind of BIOS to enumerate it quickly and >> if not, goes into sleep mode. >> >> Try setting: >> hw.usb.ehci.no_hs=1 >> >> In /boot/loader.conf . >> >> Does this change anything? > > usbd_setup_device_desc: getting device descriptor at addr 2 failed, > USB_ERR_IOERROR > usbd_setup_device_desc: getting device descriptor at addr 2 failed, > USB_ERR_IOERROR > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, > ignored) > usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, > ignored) > > seems to reliably come up with this setting on when loading u3g out of > loader.conf and letting devd do it later. > > The other variable that can trigger it is if I load a bunch of other > klds like umodem, ucom,uplcom and uftdi. > Hi, Can you check if the auto-installer is enabled on your device or not? Try Googling the AT-command to disable this. >> >> USB devices are not allowed to return with a STALL-PID on set-address >> messages, so this is violation of established USB standards. Maybe you >> need a USB wire-analyzer to nail this issue. >> >> There are a bunch of tunables for example: >> hw.usb.timings > > > Although testing a bit with > > hw.usb.timings.extra_power_up_time=990 > > seems to make the error on dmesg just up come up at a different, later > point. > > setting > > hw.usb.timings.port_powerup_delay=1000 > > does seem to help!  At least I was able to boot up 50% of the time. > Trying with 2000 however, does not seem to make it better.  still 50/50 OK >> >> Which affect how the USB device is enumerated. >> >> Is your device running the latest firmware from HUAWEI? > > Not sure. I have never upgraded the firmware in these guys before. > > Manufacturer: Huawei Technologies Co., Ltd. > Model: ME909u-523 > Revision: 11.430.63.00.00 > IMEI: xxxxx > +GCAP: +CGSM > > Do you know of any references on how to do this ?  Looking at the AT > command manual > HUAWEI should have some binaries for updating their dongles somewhere. Last time I tried this I got the update from where I bought it. Though it might require MacOS or Windows before it will install :-( > > AT^FOTADET > OK > > ^FOTASTATE: 11 > > ^DEND: 1,33,IPV4 > > > and tried again > > AT^FOTADET > OK > > ^FOTASTATE: 11 > > ^FOTASTATE: 13,13 > > ^HCSQ: "LTE",50,41,94,10 > > ^HCSQ: "LTE",44,41,137,22 > > AT^FOTADLQ > ^FOTADLQ: 1,"FIRMWARE1",0,0 > > I think 13 means "New version query failed" > > My guess is that I need to setup some specific APN data to talk to > Huawei ?  The modem is not specifically designed for the carrier, so I > dont know if the carrier usually has stuff behind the scenes for such > updates. > > Although the command AT^FWLOAD= > > This command is used to specify the upgrade type, transmit the upgrade > file into the > module using 1K-Xmodem, and start the upgrade. The following table lists > the ports > supported by the full and differential upgrades. > > So if I can find a firmware file, I can do an old school xmodem-1k > upload. I will see if I can find one from Huawei. > OK --HPS From owner-freebsd-usb@freebsd.org Wed Mar 13 15:39:46 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 477C5153700C for ; Wed, 13 Mar 2019 15:39:46 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [IPv6:2607:f3e0:0:1::12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smarthost1.sentex.ca", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 5DEB784990 for ; Wed, 13 Mar 2019 15:39:45 +0000 (UTC) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (pyroxene.sentex.ca [199.212.134.18]) by smarthost1.sentex.ca (8.15.2/8.15.2) with ESMTP id x2DFdhmj039160; Wed, 13 Mar 2019 11:39:43 -0400 (EDT) (envelope-from mike@sentex.net) Subject: Re: strange USB timing issue with u3g To: Hans Petter Selasky , freebsd-usb@FreeBSD.org References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> <7603c2a2-4227-7df1-b7f5-d7b654e6a5ee@selasky.org> From: Mike Tancsa Openpgp: preference=signencrypt Autocrypt: addr=mike@sentex.net; prefer-encrypt=mutual; keydata= mQENBEzcA24BCACpwI/iqOrs0GfQSfhA1v6Z8AcXVeGsRyKEKUpxoOYxXWc2z3vndbYlIP6E YJeifzKhS/9E+VjhhICaepLHfw865TDTUPr5D0Ed+edSsKjlnDtb6hfNJC00P7eoiuvi85TW F/gAxRY269A5d856bYrzLbkWp2lKUR3Bg6NnORtflGzx9ZWAltZbjYjjRqegPv0EQNYcHqWo eRpXilEo1ahT6nmOU8V7yEvT2j4wlLcQ6qg7w+N/vcBvyd/weiwHU+vTQ9mT61x5/wUrQhdw 2gJHeQXeDGMJV49RT2EEz+QVxaf477eyWsdQzPVjAKRMT3BVdK8WvpYAEfBAbXmkboOxABEB AAG0HG1pa2UgdGFuY3NhIDxtaWtlQHNlbnRleC5jYT6JATgEEwECACIFAkzcA24CGwMGCwkI BwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEJXHwM2kc8rX+sMH/2V6pTBKsQ5mpWWLgs6wVP2k BC+6r/YKNXv9Rw/PrC6+9hTbgA+sSjJ+8gxsCbJsOQXZrxF0x3l9oYdYfuKcwdwXFX1/FS8p HfBeDkmlH+dI709xT9wgrR4dS5aMmKp0scPrXPIAKiYVOHjOlNItcLYTEEWEFBepheEVsgmk GrNbcrHwOx/u4igUQ8vcpyXPyUki+BsftPw8ZQvBU887igh0OxaCR8AurJppQ5UQd63r81cX E1ZjoFoWCaGK/SjPb/OhpYpu5swoZIhOxQbn7OtakYPsDd5t2A5KhvjI8BMTnd5Go+2xsCmr jlIEq8Bi29gCcfQUvNiClevi13ifmnm5AQ0ETNwDbgEIALWGNJHRAhpd0A4vtd3G0oRqMBcM FGThQr3qORmEBTPPEomTdBaHcn+Xl+3YUvTBD/67/mutWBwgp2R5gQOSqcM7axvgMSHbKqBL 9sd1LsLw0UT2O5AYxv3EwzhG84pwRg3XcUqvWA4lA8tIj/1q4Jzi5qOkg1zxq4W9qr9oiYK5 bBR638JUvr3eHMaz/Nz+sDVFgwHmXZj3M6aE5Ce9reCGbvrae7H5D5PPvtT3r22X8SqfVAiO TFKedCf/6jbSOedPN931FJQYopj9P6b3m0nI3ZiCDVSqeyOAIBLzm+RBUIU3brzoxDhYR8pz CJc2sK8l6YjqivPakrD86bFDff8AEQEAAYkBHwQYAQIACQUCTNwDbgIbDAAKCRCVx8DNpHPK 1+iQB/99aqNtez9ZTBWELj269La8ntuRx6gCpzfPXfn6SDIfTItDxTh1hrdRVP5QNGGF5wus N4EMwXouskva1hbFX3Pv72csYSxxEJXjW16oV8WK4KjKXoskLg2RyRP4uXqL7Mp2ezNtVY5F 9nu3fj4ydpHCSaqKy5xd70A8D50PfZsFgkrsa5gdQhPiGGEdxhq/XSeAAnZ4uVLJKarH+mj5 MEhgZPEBWkGrbDZpezl9qbFcUem/uT9x8FYT/JIztMVh9qDcdP5tzANW5J7nvgXjska+VFGY ryZK4SPDczh74mn6GI/+RBi7OUzXXPgpPBrhS5FByjwCqjjsSpTjTds+NGIY Organization: Sentex Communications Message-ID: <68dc5645-d20c-c0bb-f393-dd22abcb8c37@sentex.net> Date: Wed, 13 Mar 2019 11:39:42 -0400 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.5.3 MIME-Version: 1.0 In-Reply-To: <7603c2a2-4227-7df1-b7f5-d7b654e6a5ee@selasky.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Content-Language: en-US X-Scanned-By: MIMEDefang 2.83 on 64.7.153.18 X-Rspamd-Queue-Id: 5DEB784990 X-Spamd-Bar: / Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of mike@sentex.net designates 2607:f3e0:0:1::12 as permitted sender) smtp.mailfrom=mike@sentex.net X-Spamd-Result: default: False [-0.92 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-0.22)[-0.225,0]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip6:2607:f3e0::/32]; NEURAL_HAM_LONG(-0.93)[-0.928,0]; MIME_GOOD(-0.10)[text/plain]; RCVD_TLS_LAST(0.00)[]; DMARC_NA(0.00)[sentex.net]; NEURAL_SPAM_SHORT(0.64)[0.639,0]; HAS_ORG_HEADER(0.00)[]; TO_MATCH_ENVRCPT_SOME(0.00)[]; MX_GOOD(-0.01)[cached: smtp.sentex.ca]; RCPT_COUNT_TWO(0.00)[2]; FROM_EQ_ENVFROM(0.00)[]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; RCVD_COUNT_TWO(0.00)[2]; MID_RHS_MATCH_FROM(0.00)[]; RCVD_IN_DNSWL_LOW(-0.10)[2.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.0.0.0.0.0.0.0.0.e.3.f.7.0.6.2.list.dnswl.org : 127.0.5.1] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 13 Mar 2019 15:39:46 -0000 On 3/13/2019 10:59 AM, Hans Petter Selasky wrote: > > Hi, > > Can you check if the auto-installer is enabled on your device or not? > HUAWEI should have some binaries for updating their dongles somewhere. > Last time I tried this I got the update from where I bought it. Though > it might require MacOS or Windows before it will install :-( > Auto install is not according to the AT commands.  Note, this is a mini-pcie device, not an external USB adapter.   Thanks for the suggestions! I will keep experimenting with the timings to see if I can find a reliable setting.     ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 x203 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada From owner-freebsd-usb@freebsd.org Wed Mar 13 15:46:53 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id ADB4015374B4 for ; Wed, 13 Mar 2019 15:46:53 +0000 (UTC) (envelope-from tomek.cedro@gmail.com) Received: from mail-ot1-f43.google.com (mail-ot1-f43.google.com [209.85.210.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "GTS CA 1O1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 72970850F5 for ; Wed, 13 Mar 2019 15:46:52 +0000 (UTC) (envelope-from tomek.cedro@gmail.com) Received: by mail-ot1-f43.google.com with SMTP id b3so2171042otp.4 for ; Wed, 13 Mar 2019 08:46:52 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=/SN4NyVWgJYGwfSBFrBR4Gk4vWkSE1U61R1sy+XFczM=; b=WaDo9LZC2yiWh9JYMPxYvakePTK4lhFQOoVWkD+nx8/BI7ll3JT7Z0YNUlTNGMu7zU UqFl/pVR92JOp7Pfe60EVt8F6fprvZ4ybgTmIG0Yr43JRez/4y4mfdeLXSalht1/W4La trZu7o+XkWpp5KoNq3yACkfcT376TeoUUTy2RHzbgKZTSfAZp6HuvvrglQUbMBr3/n/y pHja2rptXG3GkIdN+0m6g8m8b0+KrnRmiD7U404uYiggeciTibATz1Wazm82jXOHn8bx g0HP8SZkHrUTz/XA5o4P/qAcCFK04Z0NaYKObrcmeuEa9VKIueNAsZxeRxzn2Ev6hv1c uRTg== X-Gm-Message-State: APjAAAX9kWltfE6xoUVav74esCtGzdlZdcx9zubUbHh2E+8E7SFQbn+/ g8uozxzCNf8vb6XR4J/Lzokl1GFAe0usDydRww/YcO29 X-Google-Smtp-Source: APXvYqwaHNleVYW0eWTZvuh8qkGzCbvp46JSrYdoOMjF1xEOmqz0lwwV7FId99IdSTq3pgR75VSWt7ipxomgSiDdDkc= X-Received: by 2002:a9d:618d:: with SMTP id g13mr28114878otk.175.1552492010733; Wed, 13 Mar 2019 08:46:50 -0700 (PDT) MIME-Version: 1.0 References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> In-Reply-To: From: CeDeROM Date: Wed, 13 Mar 2019 16:46:38 +0100 Message-ID: Subject: Re: strange USB timing issue with u3g To: Mike Tancsa Cc: Hans Petter Selasky , "freebsd-usb@FreeBSD.org" Content-Type: text/plain; charset="UTF-8" X-Rspamd-Queue-Id: 72970850F5 X-Spamd-Bar: ---- Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of tomekcedro@gmail.com designates 209.85.210.43 as permitted sender) smtp.mailfrom=tomekcedro@gmail.com X-Spamd-Result: default: False [-4.24 / 15.00]; TO_DN_EQ_ADDR_SOME(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip4:209.85.128.0/17]; MX_GOOD(-0.01)[cached: alt3.gmail-smtp-in.l.google.com]; NEURAL_HAM_SHORT(-0.92)[-0.919,0]; FORGED_SENDER(0.30)[cederom@tlen.pl,tomekcedro@gmail.com]; IP_SCORE(-1.32)[ip: (-0.54), ipnet: 209.85.128.0/17(-3.89), asn: 15169(-2.08), country: US(-0.07)]; R_DKIM_NA(0.00)[]; FREEMAIL_ENVFROM(0.00)[gmail.com]; ASN(0.00)[asn:15169, ipnet:209.85.128.0/17, country:US]; TAGGED_FROM(0.00)[]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-1.00)[-0.995,0]; FROM_NEQ_ENVFROM(0.00)[cederom@tlen.pl,tomekcedro@gmail.com]; FROM_HAS_DN(0.00)[]; RCPT_COUNT_THREE(0.00)[3]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; MIME_GOOD(-0.10)[text/plain]; PREVIOUSLY_DELIVERED(0.00)[freebsd-usb@freebsd.org]; DMARC_NA(0.00)[tlen.pl]; MIME_TRACE(0.00)[0:+]; TO_MATCH_ENVRCPT_SOME(0.00)[]; RCVD_IN_DNSWL_NONE(0.00)[43.210.85.209.list.dnswl.org : 127.0.5.0]; RCVD_TLS_LAST(0.00)[]; RWL_MAILSPIKE_POSSIBLE(0.00)[43.210.85.209.rep.mailspike.net : 127.0.0.17]; RCVD_COUNT_TWO(0.00)[2] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 13 Mar 2019 15:46:54 -0000 Hey there! I also noticed problems with U3G module with my new Quectel EC25E miniPCI-E module replaced the Sierra Wireless on my Panasonic CF-C2 notebook.. sometimes (very very often) the /dev/cuaU* is not created properly so PPP has nothing to connect to.. So I have to use simple usbconfig to reset devices at boot.. but that also sometimes does not help as devices seems to have random order.. and it causes problems with other devices that are already attached/enumerated.. this is a bit unreliable.. I was wondering is there a problem with U3G module and how could I quick fix it without the module rewrite? Best regards :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info From owner-freebsd-usb@freebsd.org Wed Mar 13 15:50:37 2019 Return-Path: Delivered-To: freebsd-usb@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id C4BA1153780B for ; Wed, 13 Mar 2019 15:50:37 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [IPv6:2607:f3e0:0:1::12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smarthost1.sentex.ca", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 078E785764 for ; Wed, 13 Mar 2019 15:50:37 +0000 (UTC) (envelope-from mike@sentex.net) Received: from [192.168.43.26] (pyroxene.sentex.ca [199.212.134.18]) by smarthost1.sentex.ca (8.15.2/8.15.2) with ESMTP id x2DFoV4Q041712; Wed, 13 Mar 2019 11:50:32 -0400 (EDT) (envelope-from mike@sentex.net) Subject: Re: strange USB timing issue with u3g To: CeDeROM Cc: Hans Petter Selasky , "freebsd-usb@FreeBSD.org" References: <3377e001-f035-acec-765c-aee7113f20d4@sentex.net> <2476a53c-e223-1c81-165c-73fa884f30da@selasky.org> From: Mike Tancsa Openpgp: preference=signencrypt Autocrypt: addr=mike@sentex.net; prefer-encrypt=mutual; keydata= mQENBEzcA24BCACpwI/iqOrs0GfQSfhA1v6Z8AcXVeGsRyKEKUpxoOYxXWc2z3vndbYlIP6E YJeifzKhS/9E+VjhhICaepLHfw865TDTUPr5D0Ed+edSsKjlnDtb6hfNJC00P7eoiuvi85TW F/gAxRY269A5d856bYrzLbkWp2lKUR3Bg6NnORtflGzx9ZWAltZbjYjjRqegPv0EQNYcHqWo eRpXilEo1ahT6nmOU8V7yEvT2j4wlLcQ6qg7w+N/vcBvyd/weiwHU+vTQ9mT61x5/wUrQhdw 2gJHeQXeDGMJV49RT2EEz+QVxaf477eyWsdQzPVjAKRMT3BVdK8WvpYAEfBAbXmkboOxABEB AAG0HG1pa2UgdGFuY3NhIDxtaWtlQHNlbnRleC5jYT6JATgEEwECACIFAkzcA24CGwMGCwkI BwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEJXHwM2kc8rX+sMH/2V6pTBKsQ5mpWWLgs6wVP2k BC+6r/YKNXv9Rw/PrC6+9hTbgA+sSjJ+8gxsCbJsOQXZrxF0x3l9oYdYfuKcwdwXFX1/FS8p HfBeDkmlH+dI709xT9wgrR4dS5aMmKp0scPrXPIAKiYVOHjOlNItcLYTEEWEFBepheEVsgmk GrNbcrHwOx/u4igUQ8vcpyXPyUki+BsftPw8ZQvBU887igh0OxaCR8AurJppQ5UQd63r81cX E1ZjoFoWCaGK/SjPb/OhpYpu5swoZIhOxQbn7OtakYPsDd5t2A5KhvjI8BMTnd5Go+2xsCmr jlIEq8Bi29gCcfQUvNiClevi13ifmnm5AQ0ETNwDbgEIALWGNJHRAhpd0A4vtd3G0oRqMBcM FGThQr3qORmEBTPPEomTdBaHcn+Xl+3YUvTBD/67/mutWBwgp2R5gQOSqcM7axvgMSHbKqBL 9sd1LsLw0UT2O5AYxv3EwzhG84pwRg3XcUqvWA4lA8tIj/1q4Jzi5qOkg1zxq4W9qr9oiYK5 bBR638JUvr3eHMaz/Nz+sDVFgwHmXZj3M6aE5Ce9reCGbvrae7H5D5PPvtT3r22X8SqfVAiO TFKedCf/6jbSOedPN931FJQYopj9P6b3m0nI3ZiCDVSqeyOAIBLzm+RBUIU3brzoxDhYR8pz CJc2sK8l6YjqivPakrD86bFDff8AEQEAAYkBHwQYAQIACQUCTNwDbgIbDAAKCRCVx8DNpHPK 1+iQB/99aqNtez9ZTBWELj269La8ntuRx6gCpzfPXfn6SDIfTItDxTh1hrdRVP5QNGGF5wus N4EMwXouskva1hbFX3Pv72csYSxxEJXjW16oV8WK4KjKXoskLg2RyRP4uXqL7Mp2ezNtVY5F 9nu3fj4ydpHCSaqKy5xd70A8D50PfZsFgkrsa5gdQhPiGGEdxhq/XSeAAnZ4uVLJKarH+mj5 MEhgZPEBWkGrbDZpezl9qbFcUem/uT9x8FYT/JIztMVh9qDcdP5tzANW5J7nvgXjska+VFGY ryZK4SPDczh74mn6GI/+RBi7OUzXXPgpPBrhS5FByjwCqjjsSpTjTds+NGIY Organization: Sentex Communications Message-ID: <7488c8a6-c0ea-0735-4b8f-a9d0a3066337@sentex.net> Date: Wed, 13 Mar 2019 11:50:30 -0400 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.5.3 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Content-Language: en-US X-Scanned-By: MIMEDefang 2.83 on 64.7.153.18 X-Rspamd-Queue-Id: 078E785764 X-Spamd-Bar: ------ Authentication-Results: mx1.freebsd.org; spf=pass (mx1.freebsd.org: domain of mike@sentex.net designates 2607:f3e0:0:1::12 as permitted sender) smtp.mailfrom=mike@sentex.net X-Spamd-Result: default: False [-6.99 / 15.00]; ARC_NA(0.00)[]; TO_DN_EQ_ADDR_SOME(0.00)[]; RCVD_COUNT_TWO(0.00)[2]; NEURAL_HAM_MEDIUM(-1.00)[-0.998,0]; FROM_HAS_DN(0.00)[]; RCPT_COUNT_THREE(0.00)[3]; R_SPF_ALLOW(-0.20)[+ip6:2607:f3e0::/32]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; MIME_GOOD(-0.10)[text/plain]; RCVD_TLS_LAST(0.00)[]; DMARC_NA(0.00)[sentex.net]; TO_DN_SOME(0.00)[]; HAS_ORG_HEADER(0.00)[]; TO_MATCH_ENVRCPT_SOME(0.00)[]; MX_GOOD(-0.01)[cached: smtp.sentex.ca]; NEURAL_HAM_SHORT(-0.95)[-0.947,0]; IP_SCORE(-3.64)[ip: (-9.54), ipnet: 2607:f3e0::/32(-4.95), asn: 11647(-3.60), country: CA(-0.09)]; RCVD_IN_DNSWL_LOW(-0.10)[2.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.0.0.0.0.0.0.0.0.e.3.f.7.0.6.2.list.dnswl.org : 127.0.5.1]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:11647, ipnet:2607:f3e0::/32, country:CA]; MID_RHS_MATCH_FROM(0.00)[]; FROM_EQ_ENVFROM(0.00)[] X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 13 Mar 2019 15:50:38 -0000 On 3/13/2019 11:46 AM, CeDeROM wrote: > Hey there! I also noticed problems with U3G module with my new Quectel > EC25E miniPCI-E module replaced the Sierra Wireless on my Panasonic > CF-C2 notebook.. sometimes (very very often) the /dev/cuaU* is not > created properly so PPP has nothing to connect to.. > > So I have to use simple usbconfig to reset devices at boot.. but that > also sometimes does not help as devices seems to have random order.. > and it causes problems with other devices that are already > attached/enumerated.. this is a bit unreliable.. > > I was wondering is there a problem with U3G module and how could I > quick fix it without the module rewrite? I am not sure its an actual problem with the u3g module per se. The error can happen with or without the u3g module loaded, so even as a ugen device, it will fail to attach.     ---Mike > -- > ------------------- > Mike Tancsa, tel +1 519 651 3400 x203 > Sentex Communications, mike@sentex.net > Providing Internet services since 1994 www.sentex.net > Cambridge, Ontario Canada