Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Jun 1999 18:21:39 +0900
From:      Changhoon Kim <kimch@etri.re.kr>
To:        Mark Tinguely <tinguely@plains.NoDak.edu>
Cc:        FreeBSD-ATM@FreeBSD.org
Subject:   Another Hurdle on Installing ForeRunnerLE25 !!
Message-ID:  <3764C9A3.B8940DE1@etri.re.kr>
References:  <199906101348.IAA08511@plains.NoDak.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Mark.
(I'm Changhoon from Korea.
Do you remember me ? I'm the man who has consulted ForeRunnerLE25 problem with
you a few days before.)

First of all, thanks a lot for your reply and help.
But, I've met another problem after having modified "nicstar.c" and rebuilt my
kernel !
(your recommendation was this : removing out source codes from line 590 to 601
of /pci/nicstar.c, right ?)
My new kernel which has been obtained by removing those lines, does not work
correctly.
I can not boot my machine with the new kernel since the kernel image always
halts during its booting sequence. The kernel always stops working at SCSI
device settling point.
I guess that this problem results from ATM NIC's incomplete initialization.
How about your opinion ? Any solutions ?

For your convenience, I attach an error-free kernel's "dmesg" result and mark
the point where the new kernel halts.

TIA and bye !

    Changhoon.

====================================================
%dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #2: Fri Jun 11 10:41:27 KST 1999
    root@kimch.etri.re.kr:/usr/src/sys-tmp/compile/MY_CONFIG
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (334.09-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping=2

Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,M

MX,<b24>>
real memory  = 67108864 (65536K bytes)
avail memory = 62148608 (60692K bytes)
Preloaded elf kernel "kernel" at 0xc02fb000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
nicstar0: <IDT NICStAR ATM Adapter> rev 0x02 int a irq 10 on pci0.16.0  <====
*** Kernel detects ForeRunnerLE25 as NICStTAR !!
nicstar0: 32K words of RAM
nicstar0: MAC address 00:20:48:21:08:7a  <==== *** MAC address has been checked
up correctly !
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.17.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c int a irq 10 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:20:c5:e2:58:47, type NE2000 (16 bit)
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model IntelliMouse, device ID 3
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CRD-8322B/1.13>, removable, accel, dma, iordis
acd0: drive speed 5500KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked, lock protected
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface    <==== ***** the new kernel always halts here !!!!

Waiting 5 seconds for SCSI devices to settle
changing root device to da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-atm" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3764C9A3.B8940DE1>