From owner-freebsd-smp Sun Jul 11 2:52:54 1999 Delivered-To: freebsd-smp@freebsd.org Received: from verdi.nethelp.no (verdi.nethelp.no [158.36.41.162]) by hub.freebsd.org (Postfix) with SMTP id 7B15214F09 for ; Sun, 11 Jul 1999 02:52:46 -0700 (PDT) (envelope-from sthaug@nethelp.no) Received: (qmail 37676 invoked by uid 1001); 11 Jul 1999 09:52:44 +0000 (GMT) To: freebsd-smp@freebsd.org Subject: 3.2-STABLE up & running on Abit BP6 (dual Celeron socket370) From: sthaug@nethelp.no X-Mailer: Mew version 1.05+ on Emacs 19.34.2 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Date: Sun, 11 Jul 1999 11:52:44 +0200 Message-ID: <37674.931686764@verdi.nethelp.no> Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Bought myself an Abit BP6 board and a couple of Celeron 366 processors the other day. This is a dual socket 370 board - Intel of course doesn't want you to do this, but it makes for a very nice and inexpensive MP platform. Been running very smoothly so far, and it's now happily doing a buildworld. Below you'll find dmesg and mptable for the system. Steinar Haug, Nethelp consulting, sthaug@nethelp.no ---------------------------------------------------------------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-19990708-STABLE #1: Sun Jul 11 11:09:03 CEST 1999 sthaug@celery.nethelp.no:/usr/src/sys/compile/CELERY_MP Timecounter "i8254" frequency 1193182 Hz CPU: Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183fbff real memory = 268435456 (262144K bytes) avail memory = 258351104 (252296K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x02 on pci0.7.3 ncr0: rev 0x03 int a irq 17 on pci0.13.0 fxp0: rev 0x04 int a irq 16 on pci0.15.0 fxp0: Ethernet address 00:a0:c9:b6:df:4b Probing for devices on PCI bus 1: vga0: rev 0x5c int a irq 16 on pci1.0.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa wdc0: unit 0 (wd0): , DMA, 32-bit, multi-block-16 wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 Waiting 3 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! changing root device to wd0s1a ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ---------------------------------------------------------------------- =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f5b30 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x80 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f1400 signature: 'PCMP' base table length: 260 version: 1.1 checksum: 0xfd OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 24 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 6 5 0xfbff 1 0x11 AP, usable 6 6 5 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT active-hi edge 2 8 2 8 INT conforms conforms 2 9 2 9 INT conforms conforms 2 13 2 13 INT conforms conforms 2 14 2 14 INT conforms conforms 2 15 2 15 INT active-lo level 2 10 2 16 INT active-lo level 2 12 2 17 INT active-lo level 2 11 2 18 INT active-lo level 2 5 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 255 0 NMI conforms conforms 2 0 255 1 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs =============================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message