From owner-freebsd-mobile Sun Nov 19 0:51:23 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from kermodei.com (kermodei.com [216.103.110.74]) by hub.freebsd.org (Postfix) with ESMTP id 4653737B479 for ; Sun, 19 Nov 2000 00:51:20 -0800 (PST) Received: (from markd@localhost) by kermodei.com (8.9.3/8.9.3) id AAA97559; Sun, 19 Nov 2000 00:51:19 -0800 (PST) (envelope-from markd@Kermodei.com) Date: Sun, 19 Nov 2000 00:51:19 -0800 (PST) Message-Id: <200011190851.AAA97559@kermodei.com> From: Mark Diekhans To: freebsd-mobile@FreeBSD.ORG Subject: PCMCIA modems locking up system under 4.1.1 X-Mailer: VM 6.75 under Emacs 20.7.1 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi folks, I am having problems with PCMICA modems locking up FreeBSD 4.1.1 on a laptop. This happens rather frequently, probably most often on card eject, although it happens other times as well. The two modem cards that this occurs with are: MEGAHERTZ CC/XJEM3336 (modem of multifunction) U.S. Robotics XJ/CC1560J The XJ/CC1560J causes the lock up more frequently. Other than locking up the system, the modems work. The XJ/CC1560J perfectly, the CC/XJEM3336 has some issues with multi-second pauses (which I believe is unrelated). The system is a Sharp Actus 290 with a Ricoh RL5C475 PCI-CardBus Bridge. pccard.conf has: irq 15 memory 0xd0000 16k although experimenting with other values hasn't resulted in any improvement. dmesg output appended; any suggest greatly appreciated, Mark apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: at 2.0 irq 0 rl0: port 0xf800-0xf8ff mem 0xfeddfc00-0xfeddfcff irq 10 at device 3.0 on pci0 rl0: Ethernet address: 08:00:1f:06:d3:8e miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: port 0xfca0-0xfcbf irq 10 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: port 0x2180-0x218f at device 7.3 on pci0 pcic-pci0: at device 10.0 on pci0 pci0: (vendor=0x125d, dev=0x1969) at 11.0 pci0: (vendor=0x134d, dev=0x7890) at 12.0 sc0: on isa0 sc0: VGA <4 virtual consoles, flags=0x200> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. pcic0: at port 0x3e0-0x3e1 on isa0 pcic0: management irq 3 pccard0: on pcic0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources ad0: 8623MB [17520/16/63] at ata0-master using UDMA33 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 1:10:35 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 6E2C937B479 for ; Sun, 19 Nov 2000 01:10:32 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eAJ9AVQ17617; Sun, 19 Nov 2000 02:10:31 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id CAA88867; Sun, 19 Nov 2000 02:10:30 -0700 (MST) Message-Id: <200011190910.CAA88867@harmony.village.org> To: Mark Diekhans Subject: Re: PCMCIA modems locking up system under 4.1.1 Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Sun, 19 Nov 2000 00:51:19 PST." <200011190851.AAA97559@kermodei.com> References: <200011190851.AAA97559@kermodei.com> Date: Sun, 19 Nov 2000 02:10:29 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <200011190851.AAA97559@kermodei.com> Mark Diekhans writes: : I am having problems with PCMICA modems locking up FreeBSD 4.1.1 : on a laptop. This happens rather frequently, probably most often : on card eject, although it happens other times as well. The : two modem cards that this occurs with are: : : MEGAHERTZ CC/XJEM3336 (modem of multifunction) : U.S. Robotics XJ/CC1560J : : The XJ/CC1560J causes the lock up more frequently. Other than locking up : the system, the modems work. The XJ/CC1560J perfectly, the CC/XJEM3336 : has some issues with multi-second pauses (which I believe is unrelated). OK. : The system is a Sharp Actus 290 with a Ricoh RL5C475 PCI-CardBus Bridge. Hey, I have that bridge in my laptop. : pccard.conf has: : irq 15 Ah. This might be the problem. : ata0: at 0x1f0 irq 14 on atapci0 : uhci0: port 0xfca0-0xfcbf : irq 10 at device 7.2 on pci0 OK. The PIIX4 has two IDE channels. You must disable the secondary ide channel. Sadly, many modern laptops don't let you do this. You may be sharing an interrupt, which can cause undefined behavior. Undefined can mean hang :-(. Warner P.S. Other laptop users have reported this problem and picked a different irq and it worked. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 2:21: 5 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from peorth.iteration.net (peorth.iteration.net [208.190.180.178]) by hub.freebsd.org (Postfix) with ESMTP id EEAAB37B479 for ; Sun, 19 Nov 2000 02:20:00 -0800 (PST) Received: by peorth.iteration.net (Postfix, from userid 1001) id 9E63357311; Sun, 19 Nov 2000 04:20:19 -0600 (CST) Date: Sun, 19 Nov 2000 04:20:19 -0600 From: "Michael C . Wu" To: Mitsuru IWASAKI Cc: n_hibma@qubesoft.com, mobile@freebsd.org Subject: Re: usb0 not resuming and APM/ACPI weirdness Message-ID: <20001119042019.A19018@peorth.iteration.net> Reply-To: "Michael C . Wu" References: <20001028051133.A409@peorth.iteration.net> <20001119105525E.iwasaki@jp.FreeBSD.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="2oS5YaxWCcQjTEyO" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001119105525E.iwasaki@jp.FreeBSD.org>; from iwasaki@jp.FreeBSD.org on Sun, Nov 19, 2000 at 10:55:25AM +0900 X-PGP-Fingerprint: 5025 F691 F943 8128 48A8 5025 77CE 29C5 8FA1 2E20 X-PGP-Key-ID: 0x8FA12E20 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --2oS5YaxWCcQjTEyO Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sun, Nov 19, 2000 at 10:55:25AM +0900, Mitsuru IWASAKI scribbled: | > > The old "usb0: host controller halted" problem has returned | > > to my laptop after resume for suspend-to-disk on the latest current | > > for some time. After resume, usb0 floods my /var/log/messages | > > with thousands of the same messages. | > | > This is most probably a problem related to ACPI, it suspending the USB | > host controller when suspending and the USB driver getting it wrong when | > unsuspending. I have no idea how to fix this. | | Yes, most of modern laptops has power management related methods on | various devices (including USB host controller) in ACPI Machine | Language format. And these methods should to be executed by AML | interpreter in order to maintain (or re-initialize?) the devices when | the machine is going to sleep/wakeup. | | I guess that the problem is | - When suspend-to-{RAM|disk} by APM, any AML methods won't be executed. | - Currently, our ACPI code supports limited sleep state only | (suspend/hibernation in APM haven't supported yet). | | so I think that implement sleep/wakeup code in device driver which | equivalent to AML methods would be a short-term solution... | # acpidump(8) and amldb(8) maybe help us. | Of course I know that ACPI support improvement is better solution. | | BTW Michael, what laptop are you using? and could you send me ACPI | data? | # please see acpidump(8) Hi, My laptop is a Sony VAIOZ505JS Superslim I booted a kernel with device acpica options ACPI_DEBUG # ACPI Experimental Driver device acpi And enabled ACPI in the BIOS. The ACPI kernel hangs on acpi probe, would you like a ddb dump? Attached is acpidump output Thanks, -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ --2oS5YaxWCcQjTEyO Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="acpidump.txt" Content-Transfer-Encoding: quoted-printable RSD PTR: Checksum=3D2, OEMID=3DSONY, RsdtAddress=3D0x0fffc088 RSDT: Lenth=3D44, Revision=3D1, Checksum=3D52, OEMID=3DSONY, OEM Table ID=3DZ1, OEM Revision=3D0x20000511, Creator ID=3DPTL, Creator Revision=3D0x0 Entries=3D{ 0x0ffff765, 0x0ffff7d9 } DSDT=3D0xfffc0b4 INT_MODEL=3DPIC SCI_INT=3D9 SMI_CMD=3D0xb2, ACPI_ENABLE=3D0xf0, ACPI_DISABLE=3D0xf1, S4BIOS_REQ=3D0xf2 PM1a_EVT_BLK=3D0x8000-0x8003 PM1a_CNT_BLK=3D0x8042-0x8043 PM2_CNT_BLK=3D0x22-0x22 PM2_TMR_BLK=3D0x8008-0x800b PM2_GPE0_BLK=3D0x800c-0x800f P_LVL2_LAT=3D10ms, P_LVL3_LAT=3D4097ms FLUSH_SIZE=3D0, FLUSH_STRIDE=3D0 DUTY_OFFSET=3D1, DUTY_WIDTH=3D3 DAY_ALRM=3D13, MON_ALRM=3D0, CENTURY=3D50 Flags=3D{WBINVD,PWR_BUTTON,SLP_BUTTON,RTC_S4} DSDT: Lenth=3D14001, Revision=3D1, Checksum=3D62, OEMID=3DSONY, OEM Table ID=3DZ1, OEM Revision=3D0x20000511, Creator ID=3DMSFT, Creator Revision=3D0x100000c Scope(_PR_) { Processor(CPU0, 0, 0x8010, 0x6) { } } Name(_S0_, Package(0x4) { 0x5, 0x5, 0x0, 0x0, }) Name(_S1_, Package(0x4) { 0x4, 0x4, 0x0, 0x0, }) Name(_S3_, Package(0x4) { 0x1, 0x1, 0x0, 0x0, }) Name(_S4_, Package(0x4) { 0x0, 0x0, 0x0, 0x0, }) Name(_S5_, Package(0x4) { 0x0, 0x0, 0x0, 0x0, }) OperationRegion(GPO_, SystemIO, 0x8034, 0x4) Field(GPO_, DWordAcc, NoLock, Preserve) { GO00, 1, GO01, 1, GO02, 1, GO03, 1, GO04, 1, GO05, 1, GO06, 1, GO07, 1, GO08, 1, GO09, 1, GO10, 1, GO11, 1, GO12, 1, GO13, 1, GO14, 1, GO15, 1, GO16, 1, GO17, 1, GO18, 1, GO19, 1, GO20, 1, GO21, 1, GO22, 1, GO23, 1, GO24, 1, GO25, 1, GO26, 1, GO27, 1, GO28, 1, GO29, 1, GO30, 1, GO31, 1 } OperationRegion(GLBL, SystemIO, 0x8028, 0x4) Field(GLBL, DWordAcc, NoLock, Preserve) { Offset(0x3), , 1, LPOL, 1 } OperationRegion(SMI0, SystemMemory, 0x0ffffba7, 0x00000415) Field(SMI0, AnyAcc, NoLock, Preserve) { BCMD, 8, DID_, 32, INFO, 4096 } Field(SMI0, AnyAcc, NoLock, Preserve) { Offset(0x5), INFB, 8 } Field(SMI0, AnyAcc, NoLock, Preserve) { Offset(0x5), INFD, 32 } Field(SMI0, AnyAcc, NoLock, Preserve) { Offset(0x5), SXBF, 8320 } OperationRegion(SMI1, SystemIO, 0x00008040, 0x00000002) Field(SMI1, AnyAcc, NoLock, Preserve) { SMIC, 8 } Mutex(MPHS, 0) Method(PHS0, 1) { Store(Arg0, BCMD) Store(Zero, SMIC) While(LEqual(BCMD, Arg0)) { } Store(0x0, BCMD) } Method(PHS_, 1, Serialized) { Acquire(MPHS, 0xffff) Store(0x0, DID_) PHS0 Arg0 Store(INFD, Local0) Release(MPHS) Return(Local0) } Method(PHSD, 2, Serialized) { Acquire(MPHS, 0xffff) Store(0x0, DID_) Store(Arg1, INFD) PHS0 Arg0 Store(INFD, Local0) Release(MPHS) Return(Local0) } Method(PHSB, 2, Serialized) { Acquire(MPHS, 0xffff) Store(0x0, DID_) Store(Arg1, INFB) PHS0 Arg0 Store(INFB, Local0) Release(MPHS) Return(Local0) } Method(PSCS, 1, Serialized) { Acquire(MPHS, 0xffff) Store(Arg0, DID_) PHS0 0x0 Store(INFO, Local0) Release(MPHS) Return(Local0) } Method(PSSS, 2, Serialized) { Acquire(MPHS, 0xffff) Store(Arg0, DID_) Store(Arg1, INFO) PHS0 0x1 Release(MPHS) } Method(PSPS, 1, Serialized) { Acquire(MPHS, 0xffff) Store(Arg0, DID_) PHS0 0x2 Store(INFO, Local0) Release(MPHS) Return(Local0) } Method(PSDI, 1, Serialized) { Acquire(MPHS, 0xffff) Store(Arg0, DID_) PHS0 0x3 Release(MPHS) } Method(PSST, 1, Serialized) { Acquire(MPHS, 0xffff) Store(Arg0, DID_) PHS0 0x4 Store(INFB, Local0) Release(MPHS) Return(Local0) } Scope(\_GPE) { Method(_L0B) { Notify(\_SB_.PWRB, 0x2) } Method(_L0A) { Notify(\_SB_.PCI0, 0x2) } Method(_L08) { Notify(\_SB_.PCI0.USB0, 0x2) } } Method(MIN_, 2) { If(LLess(Arg0, Arg1)) { Return(Arg0) } Else { Return(Arg1) } } Method(SLEN, 1) { Return(Sizeof(Arg0)) } Method(S2BF, 1, Serialized) { Add(SLEN, Arg0, One) Local0 Name(BUFF, Buffer(Local0) { }) Store(Arg0, BUFF) Return(BUFF) } Method(SCMP, 2) { Store(S2BF, Arg0) Local0 Store(S2BF, Arg1) Local1 Store(Zero, Local4) Store(SLEN, Arg0) Local5 Store(SLEN, Arg1) Local6 Store(MIN_, Local5) Local6 Local7 While(LLess(Local4, Local7)) { Store(DerefOf(Index(Local0, Local4, )), Local2) Store(DerefOf(Index(Local1, Local4, )), Local3) If(LGreater(Local2, Local3)) { Return(One) } Else { If(LLess(Local2, Local3)) { Return(Ones) } } Increment(Local4) } If(LLess(Local4, Local5)) { Return(One) } Else { If(LLess(Local4, Local6)) { Return(Ones) } Else { Return(Zero) } } } Method(_PTS, 1) { If(LNot(LLess(Arg0, 0x2))) { Store(0x1, \_SB_.PCI0.CRST) } Else { Store(0x0, \_SB_.PCI0.CRST) } If(LEqual(Arg0, 0x4)) { Store(\_SB_.PCI0.ISA_.SPIC._CRS, \_SB_.PCI0.ISA_.SPIC.SSRC) If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero PHS_ 0xe3 PHS_ 0xe5 } Else { If(LNot(LEqual(SCMP, \_OS_))) { "Microsoft Windows" Zero PHS_ 0xe3 PHS_ 0xe5 } } } Return(0x0) } Scope(_SB_) { Device(PWRB) { Name(_HID, 0x0c0cd041) Name(_PRW, Package(0x2) { 0xb, 0x4, }) Method(_STA) { Return(0xf) } } Device(PCI0) { Name(_HID, 0x030ad041) OperationRegion(BXRS, PCI_Config, 0x7a, 0x1) Field(BXRS, ByteAcc, NoLock, Preserve) { CRST, 1, Offset(0x1) } Device(H2PB) { Name(_ADR, 0x0) OperationRegion(NRBR, PCI_Config, 0x0, 0x0100) Field(NRBR, DWordAcc, NoLock, Preserve) { Offset(0x51), , 1, AAGE, 1, Offset(0xb0), , 7, GTEN, 1 } } Device(VID0) { Name(_ADR, 0x00010000) Name(_PSC, 0x0) Method(_STA) { Return(0xf) } Method(_PS0) { Store(Zero, \_SB_.PCI0.H2PB.AAGE) Store(Zero, \_SB_.PCI0.H2PB.GTEN) Store(0x0, _PSC) } Method(_PS3) { Store(0x3, _PSC) } Name(VIDS, Package(0x3) { 0x0100, 0x00010110, 0x0200, }) Method(_DOD) { Return(VIDS) } Device(LCD_) { Name(_ADR, 0x0110) Name(ACTV, 0x1) Method(_DCS) { If(ACTV) { Return(0x1f) } Else { Return(0x1b) } } Name(_DGS, 0x1) Name(IDSS, 0x0) Method(_DSS, 1) { Store(Arg0, IDSS) If(And(Arg0, 0x80000000, )) { If(LNot(And(Arg0, 0x40000000, ))) { ^SET_ } ^NEXT } } } Device(TV__) { Name(_ADR, 0x0200) Name(ACTV, 0x1) Method(_DCS) { If(ACTV) { Return(0x1f) } Else { Return(0x1b) } } Name(_DGS, 0x1) Name(IDSS, 0x0) Method(_DSS, 1) { Store(Arg0, IDSS) If(And(Arg0, 0x80000000, )) { If(LNot(And(Arg0, 0x40000000, ))) { ^SET_ } ^NEXT } } } Method(SET_) { And(TV__.IDSS, 0x1, TV__.ACTV) And(LCD_.IDSS, 0x1, LCD_.ACTV) If(TV__.ACTV) { Store(0x4, Local0) } If(TV__.ACTV) { Or(Local0, 0x1, Local0) } PHSB 0xe4 Local0 } Method(NEXT) { If(LAnd(LCD_._DGS, LNot(TV__._DGS))) { Store(One, LCD_._DGS) Store(One, TV__._DGS) } Else { Store(One, LCD_._DGS) Store(Zero, TV__._DGS) } } } Name(_ADR, 0x0) Name(_PRT, Package(0xb) { Package(0x4) { 0x0001ffff, 0x0, LNKA, 0x0, }, Package(0x4) { 0x0001ffff, 0x1, LNKB, 0x0, }, Package(0x4) { 0x0001ffff, 0x2, LNKC, 0x0, }, Package(0x4) { 0x0001ffff, 0x3, LNKD, 0x0, }, Package(0x4) { 0x0007ffff, 0x3, LNKD, 0x0, }, Package(0x4) { 0x0008ffff, 0x0, LNKD, 0x0, }, Package(0x4) { 0x0009ffff, 0x0, LNKC, 0x0, }, Package(0x4) { 0x000affff, 0x0, LNKB, 0x0, }, Package(0x4) { 0x000bffff, 0x0, LNKA, 0x0, }, Package(0x4) { 0x000cffff, 0x0, LNKB, 0x0, }, Package(0x4) { 0x000dffff, 0x0, LNKB, 0x0, }, }) OperationRegion(REGS, PCI_Config, 0x40, 0xc0) Field(REGS, DWordAcc, NoLock, Preserve) { Offset(0x19), PAM0, 8, PAM1, 8, PAM2, 8, PAM3, 8, PAM4, 8, PAM5, 8, PAM6, 8, DRB0, 8, DRB1, 8, DRB2, 8, DRB3, 8, DRB4, 8, DRB5, 8, DRB6, 8, DRB7, 8, , 6, HEN_, 2, Offset(0x33), T_EN, 1, T_SZ, 2 } Name(RSRC, Buffer(0x01d2) {0x88, 0xe, 0x0, 0x2, 0xc, 0x0, 0x0, 0x0,= 0x0, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x1, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0= x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xa, 0x0, 0xff, 0xff, 0xb, 0x0, 0x0, 0x0,= 0x0, 0x0, 0x0, 0x0, 0x2, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x= 0, 0x0, 0x0, 0x0, 0x0, 0xc, 0x0, 0xff, 0x3f, 0xc, 0x0, 0x0, 0x0, 0x0, 0x0, = 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x= 0, 0x0, 0x40, 0xc, 0x0, 0xff, 0x7f, 0xc, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40= , 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0= x80, 0xc, 0x0, 0xff, 0xbf, 0xc, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x= 0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc0, 0xc,= 0x0, 0xff, 0xff, 0xc, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, 0= x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xd, 0x0, 0xff= , 0x3f, 0xd, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18,= 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0xd, 0x0, 0xff, 0x7f, 0= xd, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0= , 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x80, 0xd, 0x0, 0xff, 0xbf, 0xd, 0x0, = 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x= 3, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc0, 0xd, 0x0, 0xff, 0xff, 0xd, 0x0, 0x0, 0x0,= 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0= x0, 0x0, 0x0, 0x0, 0x0, 0xe, 0x0, 0xff, 0x3f, 0xe, 0x0, 0x0, 0x0, 0x0, 0x0,= 0x0, 0x40, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0= x0, 0x0, 0x40, 0xe, 0x0, 0xff, 0x7f, 0xe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x4= 0, 0x0, 0x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, = 0x80, 0xe, 0x0, 0xff, 0xbf, 0xe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0= x0, 0x0, 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc0, 0xe= , 0x0, 0xff, 0xff, 0xe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0, = 0x87, 0x18, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0= , 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x87, 0x18, 0= x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0= x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x47, 0x1, 0xf8, 0xc, 0xf8= , 0xc, 0x1, 0x8, 0x88, 0xe, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0xf7, 0= xc, 0x0, 0x0, 0xf8, 0xc, 0x0, 0x88, 0xe, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0,= 0xd, 0xff, 0xff, 0x0, 0x0, 0x0, 0xf3, 0x0, 0x79, 0x0 }) Method(_CRS, 0, Serialized) { Store(Zero, Local1) If(T_EN) { ShiftLeft(0x1, Add(T_SZ, 0x11, ), Local1) } CreateDWordField(RSRC, 0x017a, BTMN) CreateDWordField(RSRC, 0x017e, BTMX) CreateDWordField(RSRC, 0x0186, BTLN) Multiply(DRB7, 0x00800000, Local0) If(T_EN) { Subtract(Local0, Local1, Local2) Store(Local2, BTMN) Subtract(Add(Local0, 0x10000000, ), BTMN, BTLN) } Else { Store(Local0, BTMN) Subtract(0xffe00000, Local0, BTLN) Subtract(Add(BTMN, BTLN, ), 0x1, BTMX) } CreateDWordField(RSRC, 0x0195, ATMN) CreateDWordField(RSRC, 0x0199, ATMX) CreateDWordField(RSRC, 0x01a1, ATLN) If(T_EN) { Add(Add(BTMN, BTLN, ), Local1, ATMN) Subtract(0xffe00000, ATMN, ATLN) Subtract(Add(ATMN, ATLN, ), 0x1, ATMX) } Else { Store(Zero, ATLN) } CreateBitField(RSRC, 0x0188, C0RW) CreateDWordField(RSRC, 0x36, C0MN) CreateDWordField(RSRC, 0x3a, C0MX) CreateDWordField(RSRC, 0x42, C0LN) Store(One, C0RW) If(LEqual(And(PAM1, 0x3, ), 0x1)) { Store(Zero, C0RW) } Store(Zero, C0LN) If(LNot(And(PAM1, 0x3, ))) { Store(0x4000, C0LN) } CreateBitField(RSRC, 0x0260, C4RW) CreateDWordField(RSRC, 0x51, C4MN) CreateDWordField(RSRC, 0x55, C4MX) CreateDWordField(RSRC, 0x5d, C4LN) Store(One, C4RW) If(LEqual(And(PAM1, 0x30, ), 0x10)) { Store(Zero, C4RW) } Store(Zero, C4LN) If(LNot(And(PAM1, 0x30, ))) { Store(0x4000, C4LN) } CreateBitField(RSRC, 0x0338, C8RW) CreateDWordField(RSRC, 0x6c, C8MN) CreateDWordField(RSRC, 0x70, C8MX) CreateDWordField(RSRC, 0x78, C8LN) Store(One, C8RW) If(LEqual(And(PAM2, 0x3, ), 0x1)) { Store(Zero, C8RW) } Store(Zero, C8LN) If(LNot(And(PAM2, 0x3, ))) { Store(0x4000, C8LN) } CreateBitField(RSRC, 0x0410, CCRW) CreateDWordField(RSRC, 0x87, CCMN) CreateDWordField(RSRC, 0x8b, CCMX) CreateDWordField(RSRC, 0x93, CCLN) Store(One, CCRW) If(LEqual(And(PAM2, 0x30, ), 0x10)) { Store(Zero, CCRW) } Store(Zero, CCLN) If(LNot(And(PAM2, 0x30, ))) { Store(0x4000, CCLN) } CreateBitField(RSRC, 0x04e8, D0RW) CreateDWordField(RSRC, 0xa2, D0MN) CreateDWordField(RSRC, 0xa6, D0MX) CreateDWordField(RSRC, 0xae, D0LN) Store(One, D0RW) If(LEqual(And(PAM3, 0x3, ), 0x1)) { Store(Zero, D0RW) } Store(Zero, D0LN) If(LNot(And(PAM3, 0x3, ))) { Store(0x4000, D0LN) } CreateBitField(RSRC, 0x05c0, D4RW) CreateDWordField(RSRC, 0xbd, D4MN) CreateDWordField(RSRC, 0xc1, D4MX) CreateDWordField(RSRC, 0xc9, D4LN) Store(One, D4RW) If(LEqual(And(PAM3, 0x30, ), 0x10)) { Store(Zero, D4RW) } Store(Zero, D4LN) If(LNot(And(PAM3, 0x30, ))) { Store(0x4000, D4LN) } CreateBitField(RSRC, 0x0698, D8RW) CreateDWordField(RSRC, 0xd8, D8MN) CreateDWordField(RSRC, 0xdc, D8MX) CreateDWordField(RSRC, 0xe4, D8LN) Store(One, D8RW) If(LEqual(And(PAM4, 0x3, ), 0x1)) { Store(Zero, D8RW) } Store(Zero, D8LN) If(LNot(And(PAM4, 0x3, ))) { Store(0x4000, D8LN) } CreateBitField(RSRC, 0x0770, DCRW) CreateDWordField(RSRC, 0xf3, DCMN) CreateDWordField(RSRC, 0xf7, DCMX) CreateDWordField(RSRC, 0xff, DCLN) Store(Zero, DCRW) Store(0x4000, DCLN) CreateBitField(RSRC, 0x0848, E0RW) CreateDWordField(RSRC, 0x010e, E0MN) CreateDWordField(RSRC, 0x0112, E0MX) CreateDWordField(RSRC, 0x011a, E0LN) Store(One, E0RW) If(LEqual(And(PAM5, 0x3, ), 0x1)) { Store(Zero, E0RW) } Store(Zero, E0LN) If(LNot(And(PAM5, 0x3, ))) { Store(0x4000, E0LN) } CreateBitField(RSRC, 0x0920, E4RW) CreateDWordField(RSRC, 0x0129, E4MN) CreateDWordField(RSRC, 0x012d, E4MX) CreateDWordField(RSRC, 0x0135, E4LN) Store(One, E4RW) If(LEqual(And(PAM5, 0x30, ), 0x10)) { Store(Zero, E4RW) } Store(Zero, E4LN) If(LNot(And(PAM5, 0x30, ))) { Store(0x4000, E4LN) } CreateBitField(RSRC, 0x09f8, E8RW) CreateDWordField(RSRC, 0x0144, E8MN) CreateDWordField(RSRC, 0x0148, E8MX) CreateDWordField(RSRC, 0x0150, E8LN) Store(One, E8RW) If(LEqual(And(PAM6, 0x3, ), 0x1)) { Store(Zero, E8RW) } Store(Zero, E8LN) If(LNot(And(PAM6, 0x3, ))) { Store(0x4000, E8LN) } CreateBitField(RSRC, 0x0ad0, ECRW) CreateDWordField(RSRC, 0x015f, ECMN) CreateDWordField(RSRC, 0x0163, ECMX) CreateDWordField(RSRC, 0x016b, ECLN) Store(One, ECRW) If(LEqual(And(PAM6, 0x30, ), 0x10)) { Store(Zero, ECRW) } Store(Zero, ECLN) If(LNot(And(PAM6, 0x30, ))) { Store(0x4000, ECLN) } Return(RSRC) } Device(USB0) { Name(_ADR, 0x00070002) OperationRegion(CFG2, PCI_Config, 0x0, 0x0100) Field(CFG2, DWordAcc, NoLock, Preserve) { Offset(0x20), USBB, 16 } Method(_STA) { And(USBB, 0xffe0, Local0) If(LEqual(Local0, 0x0)) { Return(0x0) } Else { Return(0xf) } } Name(_PSC, 0x0) Method(_PS0) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Noop } Else { If(LEqual(_PSC, 0x3)) { PHS_ 0xc3 Store(0x0, _PSC) } } } Method(_PS3) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Noop } Else { If(LEqual(_PSC, 0x0)) { PHS_ 0xc2 Store(0x3, _PSC) } } } Method(_PRW) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Return(Package(0x2) { 0x8, 0x1, }) } Else { If(LNot(LEqual(SCMP, \_OS_))) { "Microsoft Windows" Zero Return(Package(0x2) { 0x8, 0x1, }) } Else { Return(Package(0x2) { 0x8, 0x4, }) } } } } Device(PWR_) { Name(_ADR, 0x00070003) OperationRegion(PCI_, PCI_Config, 0x50, 0x28) Field(PCI_, DWordAcc, NoLock, Preserve) { Offset(0x1), , 4, FDCM, 1, , 1, U1M_, 1, Offset(0x2), U2M_, 1, , 1, LPTM, 1, Offset(0xc), MDIE, 1, MDIA, 2, SBE_, 1, GME_, 1, SBA_, 2, MSSE, 1, MSSA, 2, Offset(0xf), , 1, AUDM, 1, , 2, KBCM, 1, G12M, 1, G13M, 1, LPTE, 1, G09A, 16, G09L, 4, , 1, G09M, 1, G09E, 1, Offset(0x13), , 1, LPTA, 2, , 1, FDCA, 1, FDCE, 1, KBCE, 1, GMM_, 1, G10A, 16, G10L, 4, , 1, G10M, 1, G10E, 1, G10C, 1, U1A_, 3, U1E_, 1, U2A_, 3, U2E_, 1, G12A, 16, G12L, 4, G12E, 1, Offset(0x20), G13A, 16, G13L, 4, G13E, 1 } } Device(IDE_) { Name(_ADR, 0x00070001) OperationRegion(PCI_, PCI_Config, 0x40, 0x10) Field(PCI_, DWordAcc, NoLock, Preserve) { Offset(0x3), , 7, SIDE, 1 } Field(PCI_, DWordAcc, NoLock, Preserve) { R40_, 32, Offset(0x8), R48_, 32 } Device(PRIM) { Name(_ADR, 0x0) Name(_PSC, 0x0) Name(IDET, 0x0) Name(UDMA, 0x0) Method(_STA) { Return(0xf) } Device(MAST) { Name(_ADR, 0x0) } Method(_PS0) { If(LEqual(_PSC, 0x3)) { Store(IDET, R40_) Store(UDMA, R48_) PHS_ 0xcd } Store(0x0, _PSC) } Method(_PS3) { Store(R40_, IDET) Store(R48_, UDMA) Store(0x3, _PSC) } } Device(SECN) { Name(_ADR, 0x1) Name(_PSC, 0x0) Name(IDET, 0x0) Name(UDMA, 0x0) Method(_STA) { Return(0xf) } Device(MAST) { Name(_ADR, 0x0) } Method(_PS0) { Store(0x0, _PSC) } Method(_PS3) { Store(0x3, _PSC) } } } Device(SD94) { Name(_ADR, 0x00080000) Name(_STA, 0xf) OperationRegion(SPCI, PCI_Config, 0x0, 0x0100) Field(SPCI, DWordAcc, NoLock, Preserve) { Offset(0xc), CALS, 8, LATI, 8, Offset(0xe0), PWST, 8 } Name(_PSC, 0x0) Method(_PS0) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Noop } Else { Store(0x0, PWST) Sleep(0x1) Store(0x8, CALS) Store(0x40, LATI) } PHS_ 0xd6 Store(0x0, _PSC) } Method(_PS3) { Store(0x3, _PSC) } } Device(CRD0) { Name(_ADR, 0x000c0000) Name(_PRW, Package(0x2) { 0xa, 0x3, }) OperationRegion(CCRD, PCI_Config, 0x0, 0xe4) Field(CCRD, DWordAcc, NoLock, Preserve) { Offset(0x4), CD04, 32, Offset(0x3e), CD3E, 32, Offset(0x44), CD44, 32, Offset(0xe0), CDE0, 8, CDE1, 8 } OperationRegion(EXCA, SystemIO, 0x03e0, 0x2) Field(EXCA, ByteAcc, NoLock, Preserve) { INDX, 8, DATA, 8 } IndexField(INDX, DATA, ByteAcc, NoLock, Preserve) { Offset(0x3), , 7, ERIB, 1 } Method(_INI) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Store(Zero, CDE1) } Else { Store(Zero, CDE0) Store(Zero, CD04) Store(Zero, CD3E) Store(One, CD44) } } Name(_PSC, 0x0) Method(PSX_, 1) { Store(0x0, CDE0) Store(0x03e0, CD44) Store(One, ERIB) Store(0x0, CD44) Store(Arg0, CDE0) Store(Arg0, _PSC) } Method(_PS0) { Store(0x0, _PSC) } Method(_PS1) { PSX_ 0x1 Or(CDE1, 0x1, CDE1) } Method(_PS2) { PSX_ 0x2 Or(CDE1, 0x1, CDE1) } Method(_PS3) { PSX_ 0x3 Or(CDE1, 0x1, CDE1) } } Device(MODE) { Name(_ADR, 0x000a0000) Name(_STA, 0xf) Method(_PRW) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows" Zero Return(Package(0x2) { 0xa, 0x4, }) } Else { If(LNot(LEqual(SCMP, \_OS_))) { "Microsoft Windows NT" Zero Return(Package(0x2) { 0xa, 0x3, }) } Else { Return(Package(0x2) { 0xa, 0x3, }) } } } Method(_PSW, 1) { If(LEqual(\_SB_.PCI0.ISA_.EC0_.ECOK, 0x0)) { PHSB 0xdd Arg0 } Else { Store(Arg0, \_SB_.PCI0.ISA_.EC0_.SMDM) } } } Device(ETHR) { Name(_ADR, 0x000b0000) Name(_STA, 0xf) Name(_PSC, 0x0) Method(_PRW) { If(LEqual(SCMP, \_OS_)) { "Microsoft Windows" Zero Return(Package(0x2) { 0xa, 0x4, }) } Else { Return(Package(0x2) { 0xa, 0x3, }) } } OperationRegion(EPCI, PCI_Config, 0x0, 0x0100) Field(EPCI, DWordAcc, NoLock, Preserve) { Offset(0xe0), ETE0, 8, ETE1, 8 } Method(_PS0) { Store(0x0, ETE0) PHS_ 0xe7 If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero And(ETE1, 0xfe, ETE1) } Else { } Store(0x0, _PSC) } Method(_PS3) { Store(0x3, _PSC) } } Device(MSCL) { Name(_ADR, 0x000d0000) Name(_STA, 0xf) Name(_PSC, 0x0) OperationRegion(MSCG, PCI_Config, 0x0, 0x0100) Field(MSCG, DWordAcc, NoLock, Preserve) { Offset(0x48), MS48, 24, Offset(0xe0), MSE0, 8, MSE1, 8 } Method(_PS0) { Store(0x0, MSE0) Store(0x00050100, MS48) And(MSE1, 0x80, Local0) If(LEqual(Local0, 0x80)) { Or(MSE1, 0x80, MSE1) } Store(0x0, _PSC) } Method(_PS3) { Store(0x3, _PSC) } } Device(ISA_) { Name(_ADR, 0x00070000) OperationRegion(PIRX, PCI_Config, 0x60, 0x4) Field(PIRX, ByteAcc, NoLock, Preserve) { PIRA, 8, PIRB, 8, PIRC, 8, PIRD, 8 } Device(MOTH) { Name(_HID, 0x020cd041) Name(_CRS, Buffer(0x3a) {0x47, 0x1, 0x80, 0x0, 0x80, 0x0, 0= x1, 0x1, 0x47, 0x1, 0xb2, 0x0, 0xb2, 0x0, 0x1, 0x2, 0x47, 0x1, 0x98, 0x3, 0= x98, 0x3, 0x1, 0x2, 0x47, 0x1, 0xd0, 0x4, 0xd0, 0x4, 0x1, 0x2, 0x47, 0x1, 0= x40, 0x10, 0x40, 0x10, 0x1, 0x10, 0x47, 0x1, 0x0, 0x80, 0x0, 0x80, 0x1, 0x5= 0, 0x47, 0x1, 0x72, 0x0, 0x72, 0x0, 0x1, 0x2, 0x79, 0x0 }) } Device(MEM_) { Name(_HID, 0x010cd041) Name(MSRC, Buffer(0x4a) {0x86, 0x9, 0x0, 0x1, 0x0, 0x0, 0x1= 0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x86, 0x9, 0x0, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0= x0, 0xa, 0x0, 0x86, 0x9, 0x0, 0x0, 0x0, 0xc0, 0xd, 0x0, 0x0, 0x40, 0x0, 0x0= , 0x86, 0x9, 0x0, 0x0, 0x0, 0x0, 0xe, 0x0, 0x0, 0x0, 0x2, 0x0, 0x86, 0x9, 0= x0, 0x0, 0x0, 0x0, 0xf8, 0xff, 0x0, 0x0, 0x8, 0x0, 0x86, 0x9, 0x0, 0x0, 0x0= , 0xf6, 0xf7, 0xff, 0x0, 0xa, 0x0, 0x0, 0x79, 0x0 }) Method(_CRS) { CreateDWordField(MSRC, 0x8, MEMS) If(LNot(MEMS)) { Store(PHS_, 0xc0) MEMS } Return(MSRC) } Method(_STA) { Return(0xf) } } Device(DMAC) { Name(_HID, 0x0002d041) Name(_CRS, Buffer(0x1d) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1= , 0x10, 0x47, 0x1, 0x81, 0x0, 0x81, 0x0, 0x1, 0xf, 0x47, 0x1, 0xc0, 0x0, 0x= c0, 0x0, 0x1, 0x20, 0x2a, 0x10, 0x0, 0x79, 0x0 }) Method(_STA) { Return(0xf) } } Device(RTC_) { Name(_HID, 0x000bd041) Name(_CRS, Buffer(0xd) {0x47, 0x1, 0x70, 0x0, 0x70, 0x0, 0x= 1, 0x2, 0x22, 0x0, 0x1, 0x79, 0x0 }) Method(_STA) { Return(0xf) } } Device(PIC_) { Name(_HID, 0xd041) Name(_CRS, Buffer(0x15) {0x47, 0x1, 0x20, 0x0, 0x20, 0x0, 0= x1, 0x2, 0x47, 0x1, 0xa0, 0x0, 0xa0, 0x0, 0x1, 0x2, 0x22, 0x4, 0x0, 0x79, 0= x0 }) Method(_STA) { Return(0xf) } } Device(FPU_) { Name(_HID, 0x040cd041) Name(_CRS, Buffer(0xd) {0x47, 0x1, 0xf0, 0x0, 0xf0, 0x0, 0x= 1, 0x10, 0x22, 0x0, 0x20, 0x79, 0x0 }) Method(_STA) { Return(0xf) } } Device(TMR_) { Name(_HID, 0x0001d041) Name(_CRS, Buffer(0xd) {0x47, 0x1, 0x40, 0x0, 0x40, 0x0, 0x= 1, 0x4, 0x22, 0x1, 0x0, 0x79, 0x0 }) Method(_STA) { Return(0xf) } } Device(SPKR) { Name(_HID, 0x0008d041) Name(_CRS, Buffer(0xa) {0x47, 0x1, 0x61, 0x0, 0x61, 0x0, 0x= 1, 0x1, 0x79, 0x0 }) Method(_STA) { Return(0xf) } } Device(KBC_) { Name(_HID, 0x0303d041) Name(_CRS, Buffer(0x15) {0x47, 0x1, 0x60, 0x0, 0x60, 0x0, 0= x1, 0x1, 0x47, 0x1, 0x64, 0x0, 0x64, 0x0, 0x1, 0x1, 0x22, 0x2, 0x0, 0x79, 0= x0 }) Method(_STA) { Return(0xf) } } Device(MOUE) { Name(_HID, 0x130fd041) Name(_CRS, Buffer(0x5) {0x22, 0x0, 0x10, 0x79, 0x0 }) } Device(EC0_) { Name(_HID, 0x090cd041) Name(_CRS, Buffer(0x12) {0x47, 0x1, 0x62, 0x0, 0x62, 0x0, 0= x1, 0x1, 0x47, 0x1, 0x66, 0x0, 0x66, 0x0, 0x1, 0x1, 0x79, 0x0 }) Name(_GPE, 0x9) Name(ECOK, 0x0) Method(_REG, 2) { If(LEqual(Arg0, 0x3)) { Store(Arg1, ECOK) } } OperationRegion(ECR_, EmbeddedControl, 0x0, 0xff) Field(ECR_, AnyAcc, Lock, Preserve) { Offset(0x80), MPBP, 1, MPBD, 1, DOKD, 1, DFBP, 1, Offset(0x81), BT1A, 1, BT2A, 1, ACAT, 1, Offset(0x82), PWRB, 1, JOGB, 1, LIDS, 1, Offset(0x83), BT1P, 1, BT2P, 1, Offset(0x84), B1ST, 8, B2ST, 8, Offset(0x90), MASK, 8, BT1S, 1, BT2S, 1, Offset(0x92), BT1W, 1, BT2W, 1, Offset(0x93), FAN0, 8, CB0S, 1, CB1S, 1, Offset(0x95), PHYO, 1, Offset(0x96), BRIT, 8, CONT, 8, SNDU, 1, SNDD, 1, Offset(0x99), SMDM, 1, Offset(0x9a), Offset(0xa0), B1RC, 16, B1AB, 16, B1RT, 16, B1VO, 16, B2RC, 16, B2AB, 16, B2RT, 16, B2VO, 16, B1DC, 16, B1LF, 16, B1DV, 16, B1DL, 16, B2DC, 16, B2LF, 16, B2DV, 16, B2DL, 16, A1TP, 16, A1AT, 16, A1PT, 16, A1CT, 16, A2TP, 16, A2AT, 16, A2PT, 16, A2CT, 16 } Method(_Q50) { PHS_ 0xe0 Notify(ACAD, 0x80) } Method(_Q51) { If(BT1A) { Notify(BAT1, 0x0) } Else { Notify(BAT1, 0x1) } Notify(BAT1, 0x80) } Method(_Q52) { Store("_Q52:Change Battery 2 Event", Debug) } Method(_Q53) { Store("_Q53:Battery Selection", Debug) } Method(_Q58) { Store("_Q58:ATF temperature trip point changd", Debug) Notify(\_TZ_.ATF0, 0x81) } Method(_Q5E) { Store("_Q5E:RI1 occurred", Debug) } Method(_Q5F) { Store("_Q5F:ATF temperature reaches trip point", Debug) Notify(\_TZ_.ATF0, 0x80) } Method(_Q60) { Notify(\_SB_.PWRB, 0x80) } Device(BAT1) { Name(_HID, 0x0a0cd041) Name(_UID, 0x1) Name(_PCL, Package(0x1) { \_SB_, }) Name(BATI, Package(0xd) { 0x0, 0x9650, 0x9650, 0x0, 0x39d0, 0x0, 0x78, 0x0, 0xa, "", "", "LION", "Sony Corp.", }) Name(BATS, Package(0x4) { 0x2, 0xffffffff, 0x0d7a, 0x3840, }) Method(_STA) { And(PHSD, 0xdb, 0x80) 0x0100 Local1 If(Local1) { Store(0x1f, Local0) } Else { Store(0xf, Local0) } Return(Local0) } Method(_BIF) { Store(PHSD, 0xdb) 0xb0 Local1 Multiply(Local1, 0xa, Index(BATI, 0x1, )) Store(PHSD, 0xdb) 0xb2 Local1 Multiply(Local1, 0xa, Index(BATI, 0x2, )) Store(PHSD, 0xdb) 0xb6 Index(BATI, 0x4, ) Return(BATI) } Method(_BST) { Store(And(PHSD, 0xdb, 0x84), 0xff) Local0 Index(BATS, 0x0, ) Store(PHSD, 0xdb) 0xa4 Local1 If(LLess(Local1, 0x8000)) { If(Local1) { Store(0xffffffff, Index(BATS, 0x1, )) } Else { Store(Zero, Index(BATS, 0x1, )) } } Else { XOr(Local1, 0xffff, Local1) Increment(Local1) Multiply(Local1, 0xa, Index(BATS, 0x1, )) } Multiply(PHSD, 0xdb, 0xa2) 0xa Index(BATS, 0x2, ) Store(PHSD, 0xdb) 0xa6 Index(BATS, 0x3, ) Return(BATS) } } Device(ACAD) { Name(_HID, "ACPI0003") Name(_PCL, Package(0x1) { \_SB_, }) Method(_PSR) { And(PHSD, 0xdb, 0x80) 0x0400 Local1 If(Local1) { Return(One) } Else { Return(Zero) } } Method(_STA) { Return(0xf) } } } Device(SPIC) { Name(_HID, 0x0160d94d) Name(RSRC, Buffer(0x15) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1= , 0x1, 0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1, 0x1, 0x22, 0x0, 0x0, 0x79, 0x0 }) Name(SSRC, Buffer(0x15) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1= , 0x1, 0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1, 0x1, 0x22, 0x0, 0x0, 0x79, 0x0 }) Method(_CRS) { CreateWordField(RSRC, 0x2, IOA1) CreateWordField(RSRC, 0x4, IOA2) CreateWordField(RSRC, 0xa, IOB1) CreateWordField(RSRC, 0xc, IOB2) CreateWordField(RSRC, 0x11, IRQV) Store(\_SB_.PCI0.PWR_.G10A, IOA1) Store(\_SB_.PCI0.PWR_.G10A, IOA2) Or(\_SB_.PCI0.PWR_.G10A, \_SB_.PCI0.PWR_.G10L, IOB1) Or(\_SB_.PCI0.PWR_.G10A, \_SB_.PCI0.PWR_.G10L, IOB2) If(GO22) { If(GO23) { Store(Zero, IRQV) } Else { ShiftLeft(0x1, 0xa, IRQV) } } Else { If(GO23) { ShiftLeft(0x1, 0xb, IRQV) } Else { ShiftLeft(0x1, 0x5, IRQV) } } Return(RSRC) } Method(_SRS, 1) { CreateWordField(Arg0, 0x2, IOA1) CreateWordField(Arg0, 0xa, IOB1) CreateWordField(Arg0, 0x11, IRQV) Store(IOA1, \_SB_.PCI0.PWR_.G10A) XOr(IOA1, IOB1, \_SB_.PCI0.PWR_.G10L) FindSetRightBit(IRQV, Local0) Decrement(Local0) If(LEqual(Local0, Zero)) { Store(0x1, GO22) Store(0x1, GO23) } If(LEqual(Local0, 0x5)) { Store(0x0, GO22) Store(0x0, GO23) } If(LEqual(Local0, 0xa)) { Store(0x1, GO22) Store(0x0, GO23) } If(LEqual(Local0, 0xb)) { Store(0x0, GO22) Store(0x1, GO23) } Store(0x0, \_SB_.PCI0.PWR_.G10M) Store(0x1, \_SB_.PCI0.PWR_.G10E) Store(0x1, \_SB_.PCI0.PWR_.G10C) } Name(_PRS, Buffer(0x4a) {0x30, 0x47, 0x1, 0x80, 0x10, 0x80,= 0x10, 0x1, 0x1, 0x47, 0x1, 0x84, 0x10, 0x84, 0x10, 0x1, 0x1, 0x30, 0x47, 0= x1, 0x90, 0x10, 0x90, 0x10, 0x1, 0x1, 0x47, 0x1, 0x94, 0x10, 0x94, 0x10, 0x= 1, 0x1, 0x30, 0x47, 0x1, 0xa0, 0x10, 0xa0, 0x10, 0x1, 0x1, 0x47, 0x1, 0xa4,= 0x10, 0xa4, 0x10, 0x1, 0x1, 0x30, 0x47, 0x1, 0xb0, 0x10, 0xb0, 0x10, 0x1, = 0x1, 0x47, 0x1, 0xb4, 0x10, 0xb4, 0x10, 0x1, 0x1, 0x38, 0x22, 0x20, 0xc, 0x= 79, 0x0 }) Method(_DIS) { Store(0x0, \_SB_.PCI0.PWR_.G10E) Store(0x0, \_SB_.PCI0.PWR_.G10C) Store(0x1, GO22) Store(0x1, GO23) } Method(_STA) { If(LAnd(GO22, GO23)) { Return(0xd) } Else { Return(0xf) } } } Mutex(SLOK, 0) Device(COMA) { Name(_HID, 0x0105d041) Name(MCD_, 0xe) Method(_CRS) { If(\_SB_.PCI0.ISA_.COMA._STA) { Acquire(SLOK, 0xffff) Store(PSCS, 0xe) Local0 Release(SLOK) Return(Local0) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(_SRS, 1) { Acquire(SLOK, 0xffff) PSSS 0xe Arg0 Release(SLOK) } Method(_PRS) { Acquire(SLOK, 0xffff) Store(PSPS, 0xe) Local0 Release(SLOK) Return(Local0) } Method(_DIS) { Acquire(SLOK, 0xffff) PSDI 0xe Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0xe) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) Method(_PS0) { Store(One, GO13) Stall(0xc8) Store(0x0, _PSC) } Method(_PS3) { Store(Zero, GO13) Store(0x3, _PSC) } Name(_PRW, Package(0x2) { 0xa, 0x3, }) } Device(FIR_) { Name(_HID, 0x0170d94d) Name(_CID, 0x0160633a) Name(MCD_, 0xf) Method(_CRS) { If(\_SB_.PCI0.ISA_.FIR_._STA) { Acquire(SLOK, 0xffff) Store(PSCS, 0xf) Local0 Release(SLOK) Return(Local0) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(B_SR, 1) { Acquire(SLOK, 0xffff) PSSS 0xf Arg0 Release(SLOK) } Method(B_PR) { Acquire(SLOK, 0xffff) Store(PSPS, 0xf) Local0 Release(SLOK) Return(Local0) } Method(B_DI) { Acquire(SLOK, 0xffff) PSDI 0xf Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0xf) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) } Device(LPTA) { Name(_HID, 0x0004d041) Name(_UID, 0x1) Name(MCD_, 0x10) Name(CRSB, Buffer(0xd) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1,= 0x8, 0x22, 0x0, 0x0, 0x79, 0x0 }) Method(_CRS) { If(\_SB_.PCI0.ISA_.LPTA._STA) { CreateWordField(CRSB, 0x2, IO1B) CreateWordField(CRSB, 0x4, IO2B) CreateWordField(CRSB, 0x6, IO3B) CreateWordField(CRSB, 0x9, IRQB) Acquire(SLOK, 0xffff) ShiftRight(READ, 0x1b, 0xf0) 0x0 0x4 Local0 Store(Zero, IRQB) If(Local0) { ShiftLeft(0x1, Local0, IRQB) } Or(ShiftLeft(And(R430, 0xfc, ), 0x8, ), ShiftLeft(R= 420, 0x2, ), IO1B) Store(IO1B, IO2B) If(LEqual(IO1B, 0x03bc)) { Store(0x0401, IO3B) } Store(CRSB, Local1) Release(SLOK) Return(Local1) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(B_SR, 1) { Name(XRFI, Package(0x10) { 0x0, 0x0, 0x0, 0x0, 0x0, 0x7, 0x0, 0x1, 0x0, 0x2, 0x3, 0x4, 0x0, 0x0, 0x5, 0x6, }) CreateWordField(Arg0, 0x2, IO1A) CreateWordField(Arg0, 0x9, IRQB) Acquire(SLOK, 0xffff) WRIT 0x0 0xfe 0x0 0x0 WRIT 0x42 0x0 ShiftRight(IO1A, 0x2, ) 0x0 WRIT 0x43 0x3 ShiftRight(IO1A, 0x8, ) 0x0 FindSetRightBit(IRQB, Local0) If(Local0) { Decrement(Local0) WRIT 0x1b 0xf ShiftLeft(Local0, 0x4, ) 0x0 WRIT 0x1b 0xf8 DerefOf(Index(XRFI, Local0, )) 0x0 } Else { WRIT 0x1b 0x8 0x0 0x0 } WRIT 0x0 0xfe 0x1 0x0 Release(SLOK) } Method(B_PR) { Acquire(SLOK, 0xffff) Store(PSPS, 0x10) Local0 Release(SLOK) Return(Local0) } Method(B_DI) { Acquire(SLOK, 0xffff) PSDI 0x10 Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0x10) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) } Device(LPTB) { Name(_HID, 0x0004d041) Name(_UID, 0x2) Name(MCD_, 0x11) Name(CRSB, Buffer(0xd) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1,= 0x8, 0x22, 0x0, 0x0, 0x79, 0x0 }) Method(_CRS) { If(\_SB_.PCI0.ISA_.LPTB._STA) { Acquire(SLOK, 0xffff) CreateWordField(CRSB, 0x2, IO1B) CreateWordField(CRSB, 0x4, IO2B) CreateWordField(CRSB, 0x6, IO3B) CreateWordField(CRSB, 0x9, IRQB) Or(ShiftLeft(And(R430, 0xfc, ), 0x8, ), ShiftLeft(R= 420, 0x2, ), IO1B) Store(IO1B, IO2B) If(LEqual(IO1B, 0x03bc)) { Store(0x0401, IO3B) } Store(Zero, IRQB) ShiftRight(READ, 0x1b, 0xf0) 0x0 0x4 Local0 If(Local0) { ShiftLeft(0x1, Local0, IRQB) } Store(CRSB, Local1) Release(SLOK) Return(Local1) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(B_SR, 1) { Name(XRFI, Package(0x10) { 0x0, 0x0, 0x0, 0x0, 0x0, 0x7, 0x0, 0x1, 0x0, 0x2, 0x3, 0x4, 0x0, 0x0, 0x5, 0x6, }) CreateWordField(Arg0, 0x2, IO1A) CreateWordField(Arg0, 0x9, IRQB) Acquire(SLOK, 0xffff) WRIT 0x0 0xfe 0x0 0x0 WRIT 0x42 0x0 ShiftRight(IO1A, 0x2, ) 0x0 WRIT 0x43 0x3 ShiftRight(IO1A, 0x8, ) 0x0 FindSetRightBit(IRQB, Local0) If(Local0) { Decrement(Local0) WRIT 0x1b 0xf ShiftLeft(Local0, 0x4, ) 0x0 WRIT 0x1b 0xf8 DerefOf(Index(XRFI, Local0, )) 0x0 } Else { WRIT 0x1b 0x8 0x0 0x0 } WRIT 0x0 0xfe 0x1 0x0 Release(SLOK) } Method(B_PR) { Acquire(SLOK, 0xffff) Store(PSPS, 0x11) Local0 Release(SLOK) Return(Local0) } Method(B_DI) { Acquire(SLOK, 0xffff) PSDI 0x11 Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0x11) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) } Device(ECP_) { Name(_HID, 0x0104d041) Name(MCD_, 0x12) Name(CRSA, Buffer(0x18) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1= , 0x8, 0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1, 0x8, 0x22, 0x0, 0x0, 0x2a, 0x0, = 0x0, 0x79, 0x0 }) Method(_CRS) { If(\_SB_.PCI0.ISA_.ECP_._STA) { CreateWordField(CRSA, 0x2, IO1A) CreateWordField(CRSA, 0x4, IO2A) CreateWordField(CRSA, 0x6, IO3A) CreateWordField(CRSA, 0xa, IO4A) CreateWordField(CRSA, 0xc, IO5A) CreateWordField(CRSA, 0xe, IO6A) CreateWordField(CRSA, 0x11, IRQA) CreateByteField(CRSA, 0x14, DMAA) Acquire(SLOK, 0xffff) Or(ShiftLeft(And(R430, 0xfc, ), 0x8, ), ShiftLeft(R= 420, 0x2, ), IO1A) Store(IO1A, IO2A) Add(IO1A, 0x0400, IO4A) Add(IO1A, 0x0400, IO5A) If(LEqual(IO1A, 0x03bc)) { Store(0x0401, IO3A) Store(0x0301, IO6A) } Else { Store(0x0301, IO6A) } Store(Zero, IRQA) ShiftRight(READ, 0x1b, 0xf0) 0x0 0x4 Local0 If(Local0) { ShiftLeft(0x1, Local0, IRQA) } ShiftRight(READ, 0x18, 0x6) 0x0 0x1 DMAA ShiftLeft(0x1, DMAA, DMAA) Store(CRSA, Local1) Release(SLOK) Return(Local1) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(_SRS, 1) { Name(XRFI, Package(0x10) { 0x0, 0x0, 0x0, 0x0, 0x0, 0x7, 0x0, 0x1, 0x0, 0x2, 0x3, 0x4, 0x0, 0x0, 0x5, 0x6, }) CreateWordField(Arg0, 0x2, IO1A) CreateWordField(Arg0, 0x11, IRQA) CreateByteField(Arg0, 0x14, DMAA) Acquire(SLOK, 0xffff) WRIT 0x0 0xfe 0x0 0x0 WRIT 0x42 0x0 ShiftRight(IO1A, 0x2, ) 0x0 WRIT 0x43 0x3 ShiftRight(IO1A, 0x8, ) 0x0 FindSetRightBit(IRQA, Local0) If(Local0) { Decrement(Local0) WRIT 0x1b 0xf ShiftLeft(Local0, 0x4, ) 0x0 WRIT 0x1b 0xf8 DerefOf(Index(XRFI, Local0, )) 0x0 } Else { WRIT 0x1b 0x8 0x0 0x0 } FindSetRightBit(DMAA, Local0) WRIT 0x18 0xc7 ShiftLeft(Local0, 0x3, ) 0x0 WRIT 0x0 0xfe 0x1 0x0 PHS_ 0xda Release(SLOK) } Method(_PRS) { Acquire(SLOK, 0xffff) Store(PSPS, 0x12) Local0 Release(SLOK) Return(Local0) } Method(_DIS) { Acquire(SLOK, 0xffff) PSDI 0x12 Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0x12) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) } Device(EPP_) { Name(_HID, 0x0004d041) Name(_UID, 0x3) Name(MCD_, 0x13) Name(CRSB, Buffer(0xd) {0x47, 0x1, 0x0, 0x0, 0x0, 0x0, 0x1,= 0x8, 0x22, 0x0, 0x0, 0x79, 0x0 }) Method(_CRS) { If(\_SB_.PCI0.ISA_.EPP_._STA) { CreateWordField(CRSB, 0x2, IO1B) CreateWordField(CRSB, 0x4, IO2B) CreateWordField(CRSB, 0x6, IO3B) CreateWordField(CRSB, 0x9, IRQB) Acquire(SLOK, 0xffff) Or(ShiftLeft(And(R430, 0xfc, ), 0x8, ), ShiftLeft(R= 420, 0x2, ), IO1B) Store(IO1B, IO2B) Store(Zero, IRQB) ShiftRight(READ, 0x1b, 0xf0) 0x0 0x4 Local0 If(Local0) { ShiftLeft(0x1, Local0, IRQB) } Store(CRSB, Local1) Release(SLOK) Return(Local1) } Else { Return(Buffer(0x2) {0x79, 0x0 }) } } Method(B_SR, 1) { Name(XRFI, Package(0x10) { 0x0, 0x0, 0x0, 0x0, 0x0, 0x7, 0x0, 0x1, 0x0, 0x2, 0x3, 0x4, 0x0, 0x0, 0x5, 0x6, }) CreateWordField(Arg0, 0x2, IO1A) CreateWordField(Arg0, 0x9, IRQB) Acquire(SLOK, 0xffff) WRIT 0x0 0xfe 0x0 0x0 WRIT 0x42 0x0 ShiftRight(IO1A, 0x2, ) 0x0 WRIT 0x43 0x3 ShiftRight(IO1A, 0x8, ) 0x0 FindSetRightBit(IRQB, Local0) If(Local0) { Decrement(Local0) WRIT 0x1b 0xf ShiftLeft(Local0, 0x4, ) 0x0 WRIT 0x1b 0xf8 DerefOf(Index(XRFI, Local0, )) 0x0 } Else { WRIT 0x1b 0x8 0x0 0x0 } WRIT 0x0 0xfe 0x1 0x0 WRIT 0x4 0xfa 0x1 0x0 Release(SLOK) } Method(B_PR) { Acquire(SLOK, 0xffff) Store(PSPS, 0x13) Local0 Release(SLOK) Return(Local0) } Method(B_DI) { Acquire(SLOK, 0xffff) PSDI 0x13 Release(SLOK) } Method(_STA) { Acquire(SLOK, 0xffff) Store(PSST, 0x13) Local0 Release(SLOK) Return(Local0) } Name(_PSC, 0x0) } OperationRegion(SIOR, SystemIO, 0x0398, 0x2) Field(SIOR, ByteAcc, NoLock, Preserve) { INDX, 8, DATA, 8 } IndexField(INDX, DATA, ByteAcc, NoLock, Preserve) { R000, 8, Offset(0x2), R020, 8, Offset(0x4), R040, 8, Offset(0x42), R420, 8, R430, 8, R440, 8, R450, 8, R460, 8, R470, 8, R480, 8, R490, 8, Offset(0x4f), R4F0, 8 } Method(READ, 3) { If(LNot(Arg2)) { Store(Arg0, INDX) Return(And(DATA, Arg1, )) } } Method(WRIT, 4) { If(LNot(Arg3)) { Store(Arg0, INDX) Or(And(DATA, Arg1, ), Arg2, Local0) Store(Arg0, INDX) Store(Local0, DATA) Store(Local0, DATA) } Else { } } Device(SNC_) { Name(_HID, 0x0150d94d) Method(GPID) { Return(PHSB) 0xc1 0x0 } Method(GBRT) { If(LEqual(\_SB_.PCI0.ISA_.EC0_.ECOK, 0x0)) { Store(PHSD, 0xdb) 0x96 Local0 } Else { Store(\_SB_.PCI0.ISA_.EC0_.BRIT, Local0) } Return(PHSB) 0xd2 Local0 } Method(SBRT, 1) { Store(PHSB, 0xd0) Arg0 Local0 If(LEqual(\_SB_.PCI0.ISA_.EC0_.ECOK, 0x0)) { PHSB 0xde Local0 } Else { Store(Local0, \_SB_.PCI0.ISA_.EC0_.BRIT) } Return(Zero) } Method(GPBR) { Return(PHSB) 0xc6 0x0 } Method(SPBR, 1) { PHSB 0xc7 Arg0 Return(Zero) } Method(GCTR) { If(LEqual(\_SB_.PCI0.ISA_.EC0_.ECOK, 0x0)) { Store(PHSD, 0xdb) 0x97 Local0 } Else { Store(\_SB_.PCI0.ISA_.EC0_.CONT, Local0) } Return(PHSB) 0xd3 Local0 } Method(SCTR, 1) { Store(PHSB, 0xd1) Arg0 Local0 If(LEqual(\_SB_.PCI0.ISA_.EC0_.ECOK, 0x0)) { PHSB 0xdf Local0 } Else { Store(Local0, \_SB_.PCI0.ISA_.EC0_.CONT) } Return(Zero) } Method(GPCR) { Return(PHSB) 0xc8 0x0 } Method(SPCR, 1) { PHSB 0xc9 Arg0 Return(Zero) } Method(SLVT) { Return(PHSB) 0xca 0x0 } Method(SLTT) { Return(PHSB) 0xcb 0x0 } Method(SEVF) { Return(PHSB) 0xcc 0x0 } Method(GCMI, 1) { Return(PHSD) 0xce Arg0 } Method(SCMI, 1) { Return(PHSD) 0xcf Arg0 } Method(PWAK) { Noop Return(Zero) } Method(PWRN) { Notify(\_SB_.PWRB, 0x80) } Method(CSXB, 1) { Acquire(MPHS, 0xffff) Store(Arg0, SXBF) PHS0 0xe2 Store(SXBF, Local0) Release(MPHS) Return(Local0) } Method(CMGB, 1) { If(Arg0) { Store(0x0, GO12) } Else { Store(0x1, GO12) } Return(Zero) } } OperationRegion(GENC, PCI_Config, 0xb0, 0x4) Field(GENC, DWordAcc, NoLock, Preserve) { ISAS, 1, POSD, 1, , 9, ID0T, 1, ID1T, 1 } OperationRegion(PCI_, PCI_Config, 0x60, 0x4) Field(PCI_, DWordAcc, NoLock, Preserve) { PIRQ, 32 } Name(P1__, Buffer(0x4) {0x0 }) Method(RESP) { Store(P1__, PIRQ) } Method(SAVP) { Store(PIRQ, P1__) } } } } Scope(\_SI_) { Method(_SST, 1) { If(LEqual(Arg0, 0x0)) { } If(LEqual(Arg0, 0x1)) { } If(LEqual(Arg0, 0x2)) { } If(LEqual(Arg0, 0x3)) { } If(LEqual(Arg0, 0x4)) { } If(LEqual(Arg0, 0x5)) { } } } Method(_WAK, 1) { Store(0x0, \_SB_.PCI0.CRST) If(LEqual(Arg0, 0x1)) { PHS_ 0xe0 } If(LEqual(Arg0, 0x4)) { \_SB_.PCI0.ISA_.SPIC._SRS \_SB_.PCI0.ISA_.SPIC.SSRC If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero PHS_ 0xe6 } Else { If(LNot(LEqual(SCMP, \_OS_))) { "Microsoft Windows" Zero PHS_ 0xe6 } } } If(LEqual(SCMP, \_OS_)) { "Microsoft Windows NT" Zero Noop } Else { If(LNot(LEqual(SCMP, \_OS_))) { "Microsoft Windows" Zero Noop } Else { Notify(\_SB_.PWRB, 0x2) } } Return(Zero) } Scope(\_TZ_) { ThermalZone(ATF0) { Method(KELV, 1) { Store(Arg0, Local0) Multiply(Local0, 0xa, Local0) Add(Local0, 0x0aab, Local0) Return(Local0) } Method(_TMP) { ShiftRight(PHSD, 0xdb, 0xc0) 0x8 Local0 Return(KELV) Local0 } Method(_PSV) { ShiftRight(PHSD, 0xdb, 0xc4) 0x8 Local0 Return(KELV) Local0 } Name(_PSL, Package(0x1) { \_PR_.CPU0, }) Method(_CRT) { ShiftRight(PHSD, 0xdb, 0xc6) 0x8 Local0 Return(KELV) Local0 } Name(_TC1, 0x1) Name(_TC2, 0x1) Name(_TSP, 0x32) } } Scope(_SB_) { Name(IRQP, Package(0x10) { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0200, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, }) Device(LNKA) { Name(_HID, 0x0f0cd041) Name(_UID, 0x1) Name(_PRS, Buffer(0x6) {0x23, 0x0, 0x2, 0x18, 0x79, 0x0 }) Method(_DIS) { Or(\_SB_.PCI0.ISA_.PIRA, 0x80, \_SB_.PCI0.ISA_.PIRA) } Method(_CRS) { Name(BUFA, Buffer(0x6) {0x23, 0x0, 0x0, 0x18, 0x79, 0x0 }) CreateWordField(BUFA, 0x1, IRA1) And(\_SB_.PCI0.ISA_.PIRA, 0x8f, Local0) If(LLess(Local0, 0x80)) { And(Local0, 0xf, Local0) Store(DerefOf(Index(IRQP, Local0, )), Local4) Store(Local4, IRA1) } Return(BUFA) } Method(_SRS, 1) { CreateWordField(Arg0, 0x1, IRA1) Store(IRA1, Local0) Store(Match(IRQP, MEQ, Local0, MTR, 0x0, 0x0), Local1) And(\_SB_.PCI0.ISA_.PIRA, 0x70, Local0) Or(Local1, Local0, \_SB_.PCI0.ISA_.PIRA) } Method(_STA) { If(LEqual(\_SB_.PCI0.ISA_.PIRA, 0x80)) { Return(0x9) } Else { Return(0xb) } } } Device(LNKB) { Name(_HID, 0x0f0cd041) Name(_UID, 0x2) Name(_PRS, Buffer(0x6) {0x23, 0x0, 0x2, 0x18, 0x79, 0x0 }) Method(_DIS) { Or(\_SB_.PCI0.ISA_.PIRB, 0x80, \_SB_.PCI0.ISA_.PIRB) } Method(_CRS) { Name(BUFA, Buffer(0x6) {0x23, 0x0, 0x0, 0x18, 0x79, 0x0 }) CreateWordField(BUFA, 0x1, IRA1) And(\_SB_.PCI0.ISA_.PIRB, 0x8f, Local0) If(LLess(Local0, 0x80)) { And(Local0, 0xf, Local0) Store(DerefOf(Index(IRQP, Local0, )), Local4) Store(Local4, IRA1) } Return(BUFA) } Method(_SRS, 1) { CreateWordField(Arg0, 0x1, IRA1) Store(IRA1, Local0) Store(Match(IRQP, MEQ, Local0, MTR, 0x0, 0x0), Local1) And(\_SB_.PCI0.ISA_.PIRB, 0x70, Local0) Or(Local1, Local0, \_SB_.PCI0.ISA_.PIRB) } Method(_STA) { If(LEqual(\_SB_.PCI0.ISA_.PIRB, 0x80)) { Return(0x9) } Else { Return(0xb) } } } Device(LNKC) { Name(_HID, 0x0f0cd041) Name(_UID, 0x3) Name(_PRS, Buffer(0x6) {0x23, 0x0, 0x2, 0x18, 0x79, 0x0 }) Method(_DIS) { Or(\_SB_.PCI0.ISA_.PIRC, 0x80, \_SB_.PCI0.ISA_.PIRC) } Method(_CRS) { Name(BUFA, Buffer(0x6) {0x23, 0x0, 0x0, 0x18, 0x79, 0x0 }) CreateWordField(BUFA, 0x1, IRA1) And(\_SB_.PCI0.ISA_.PIRC, 0x8f, Local0) If(LLess(Local0, 0x80)) { And(Local0, 0xf, Local0) Store(DerefOf(Index(IRQP, Local0, )), Local4) Store(Local4, IRA1) } Return(BUFA) } Method(_SRS, 1) { CreateWordField(Arg0, 0x1, IRA1) Store(IRA1, Local0) Store(Match(IRQP, MEQ, Local0, MTR, 0x0, 0x0), Local1) And(\_SB_.PCI0.ISA_.PIRC, 0x70, Local0) Or(Local1, Local0, \_SB_.PCI0.ISA_.PIRC) } Method(_STA) { If(LEqual(\_SB_.PCI0.ISA_.PIRC, 0x80)) { Return(0x9) } Else { Return(0xb) } } } Device(LNKD) { Name(_HID, 0x0f0cd041) Name(_UID, 0x4) Name(_PRS, Buffer(0x6) {0x23, 0x0, 0x2, 0x18, 0x79, 0x0 }) Method(_DIS) { Or(\_SB_.PCI0.ISA_.PIRD, 0x80, \_SB_.PCI0.ISA_.PIRD) } Method(_CRS) { Name(BUFA, Buffer(0x6) {0x23, 0x0, 0x0, 0x18, 0x79, 0x0 }) CreateWordField(BUFA, 0x1, IRA1) And(\_SB_.PCI0.ISA_.PIRD, 0x8f, Local0) If(LLess(Local0, 0x80)) { And(Local0, 0xf, Local0) Store(DerefOf(Index(IRQP, Local0, )), Local4) Store(Local4, IRA1) } Return(BUFA) } Method(_SRS, 1) { CreateWordField(Arg0, 0x1, IRA1) Store(IRA1, Local0) Store(Match(IRQP, MEQ, Local0, MTR, 0x0, 0x0), Local1) And(\_SB_.PCI0.ISA_.PIRD, 0x70, Local0) Or(Local1, Local0, \_SB_.PCI0.ISA_.PIRD) } Method(_STA) { If(LEqual(\_SB_.PCI0.ISA_.PIRD, 0x80)) { Return(0x9) } Else { Return(0xb) } } } } BOOT: Lenth=3D39, Revision=3D1, Checksum=3D84, OEMID=3DSONY, OEM Table ID=3DZ1, OEM Revision=3D0x20000511, Creator ID=3DPTL, Creator Revision=3D0x1 --2oS5YaxWCcQjTEyO-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 5:31:15 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from tasogare.imasy.or.jp (tasogare.imasy.or.jp [202.227.24.5]) by hub.freebsd.org (Postfix) with ESMTP id 02C5137B479 for ; Sun, 19 Nov 2000 05:31:13 -0800 (PST) Received: from localhost (iwasaki.imasy.or.jp [202.227.24.92]) by tasogare.imasy.or.jp (8.10.2+3.3W/3.7W-tasogare/smtpfeed 1.07) with ESMTP id eAJDV7q15160; Sun, 19 Nov 2000 22:31:07 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) To: keichii@peorth.iteration.net, keichii@iteration.net Cc: iwasaki@jp.FreeBSD.org, n_hibma@qubesoft.com, mobile@freebsd.org Subject: Re: usb0 not resuming and APM/ACPI weirdness In-Reply-To: <20001119042019.A19018@peorth.iteration.net> References: <20001119105525E.iwasaki@jp.FreeBSD.org> <20001119042019.A19018@peorth.iteration.net> X-Mailer: Mew version 1.94.1 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20001119223102H.iwasaki@jp.FreeBSD.org> Date: Sun, 19 Nov 2000 22:31:02 +0900 From: Mitsuru IWASAKI X-Dispatcher: imput version 20000228(IM140) Lines: 38 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, > | BTW Michael, what laptop are you using? and could you send me ACPI > | data? > | # please see acpidump(8) > > Hi, > > My laptop is a Sony VAIOZ505JS Superslim Thanks. Could you send me DSDT data by using 'acpidump -o PCG-Z505JS.dsdt' ? I'll add them to our ACPI data collection at http://www.jp.freebsd.org/cgi/cvsweb.cgi/ACPI/data/?cvsroot=freebsd-jp and try to write device_{suspend|resume} methods of USB driver for your local patch translating AML _PS3/_PS0 methods so that the USB host controller works with APM suspend/resume. > I booted a kernel with > device acpica > options ACPI_DEBUG OK. > # ACPI Experimental Driver > device acpi This line is obsolete, please remove it. > And enabled ACPI in the BIOS. > > The ACPI kernel hangs on acpi probe, would you like a ddb dump? Yes, at least we need to know the console messages just before hangs. # And please note that current FreeBSD ACPI support won't solve # your problem unfortunately ... Thanks, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 8:59: 2 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.yogotech.com (ns.yogotech.com [206.127.123.66]) by hub.freebsd.org (Postfix) with ESMTP id C325B37B4C5 for ; Sun, 19 Nov 2000 08:58:58 -0800 (PST) Received: from nomad.yogotech.com (nomad.yogotech.com [206.127.123.131]) by ns.yogotech.com (8.9.3/8.9.3) with ESMTP id JAA28721; Sun, 19 Nov 2000 09:58:57 -0700 (MST) (envelope-from nate@nomad.yogotech.com) Received: (from nate@localhost) by nomad.yogotech.com (8.8.8/8.8.8) id JAA06489; Sun, 19 Nov 2000 09:58:53 -0700 (MST) (envelope-from nate) From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14872.1741.13164.291719@nomad.yogotech.com> Date: Sun, 19 Nov 2000 09:58:53 -0700 (MST) To: Mark Diekhans Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <200011190851.AAA97559@kermodei.com> References: <200011190851.AAA97559@kermodei.com> X-Mailer: VM 6.75 under 21.1 (patch 12) "Channel Islands" XEmacs Lucid Reply-To: nate@yogotech.com (Nate Williams) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Hi folks, > I am having problems with PCMICA modems locking up FreeBSD 4.1.1 > on a laptop. This happens rather frequently, probably most often > on card eject, although it happens other times as well. Lockups on eject is an occurance that can't be totally avoided. The lockup can be minimized by *NOT* using polling (which makes the race window much smaller). The other way to avoid it is to 'power down' the card before removing it, although I don't know if the 'power' code is in 4.x. If it is, you should be able to power down the card before removing it w/out any lockups. If it's locking up outside of card eject, then something is *really* messed up, since it "shouldn't happen". (FWIW, WinXX will also lockup with modems on occasion, although because they use an IRQ for insertion/removal events the race window is very small....) See the mobile archives for a much more in-depth look at this problem. Naet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 10:21:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from Millions.Ca (h-207-228-120-32.gen.cadvision.com [207.228.120.32]) by hub.freebsd.org (Postfix) with ESMTP id 0202137B479 for ; Sun, 19 Nov 2000 10:21:12 -0800 (PST) Received: (from uucp@localhost) by Millions.Ca (8.9.3/8.9.3) id LAA58086; Sun, 19 Nov 2000 11:21:06 -0700 (MST) (envelope-from stacy@Millions.CA) Received: from Oak.Millions.Ca(192.168.64.1) via SMTP by mail-gw-0.millions.ca, id smtpda58084; Sun Nov 19 11:20:55 2000 Received: from Millions.CA (Maple.Millions.Ca [192.168.64.2]) by oak.millions.ca (8.8.8/8.8.5) with ESMTP id LAA03819; Sun, 19 Nov 2000 11:20:50 -0700 (MST) Message-ID: <3A181A01.8E1A62D7@Millions.CA> Date: Sun, 19 Nov 2000 11:20:49 -0700 From: Stacy Millions Organization: Millions Consulting Limited X-Mailer: Mozilla 4.75 [en] (WinNT; U) X-Accept-Language: en-US MIME-Version: 1.0 To: Jonas Bulow , freebsd-mobile@FreeBSD.ORG Subject: Re: KME PC Card SCSI adapter References: <3A069815.7BC4FB90@servicefactory.se> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Jonas Bulow wrote: > I have a HP-m820e CD-writer. I have the same > "KME" "SCSI-CARD-001" ditto > Does anybody know anything about this SCSI-card and if it's possible to > get it work with FreeBSD? I have good news and I have bad news: The good news is, with the recently committed nsp driver, the following line in my kernel config device nsp and the following entry in /etc/pccard.conf card "KME" "SCSI-CARD-001" config auto "nsp" ? I get the following dmesg output nsp0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0 nsp0: try to reset scsi bus SCSI_LOW_ATTENTION(msgout): 0x40 cd0 at nsp0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: cd present [275167 x 2048 byte records] SCSI_LOW_ATTENTION(msgout): 0x40 and I have a functional cd-r device! Just remember, the dip switch on the card has to be in the 16bit position. The bad news is, I recently bought a 1460 on eBay :-) -stacy -- Nothing spoils fun like finding out it builds character. - Calvin Stacy Millions stacy@millions.ca Millions Consulting Limited To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 12:33:52 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from kermodei.com (kermodei.com [216.103.110.74]) by hub.freebsd.org (Postfix) with ESMTP id 07E6337B479 for ; Sun, 19 Nov 2000 12:33:50 -0800 (PST) Received: (from markd@localhost) by kermodei.com (8.9.3/8.9.3) id MAA98623; Sun, 19 Nov 2000 12:33:44 -0800 (PST) (envelope-from markd@Kermodei.com) From: Mark Diekhans MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14872.14631.971040.158415@osprey.Kermodei.Com> Date: Sun, 19 Nov 2000 12:33:43 -0800 To: nate@yogotech.com (Nate Williams) Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <14872.1741.13164.291719@nomad.yogotech.com> References: <200011190851.AAA97559@kermodei.com> <14872.1741.13164.291719@nomad.yogotech.com> X-Mailer: VM 6.80 under Emacs 20.7.5 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Many thanks Nate, It looks likes Warner hit the nail on the head; the system has some `hidden' IRQs that I wasn't aware of (2nd IDE controller and ACPI). Given that a try; a laptop is not something I expected to run out of IRQs on. Mark Nate Williams writes: > > Hi folks, > > I am having problems with PCMICA modems locking up FreeBSD 4.1.1 > > on a laptop. This happens rather frequently, probably most often > > on card eject, although it happens other times as well. ... > If it's locking up outside of card eject, then something is *really* > messed up, since it "shouldn't happen". To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 13:12:16 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.usinternet.com (smtp.usinternet.com [216.17.3.30]) by hub.freebsd.org (Postfix) with ESMTP id 9E74337B479 for ; Sun, 19 Nov 2000 13:12:14 -0800 (PST) Received: from ares.usinternet.com ([216.17.55.137]) by smtp.usinternet.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with SMTP id com for ; Sun, 19 Nov 2000 15:12:08 -0600 Received: by ares.usinternet.com (sSMTP sendmail emulation); Sun, 19 Nov 2000 15:12:07 -0600 Date: Sun, 19 Nov 2000 15:12:07 -0600 From: Ben Lutgens To: mobile@freebsd.org Subject: PCMPC100 pcmcia problems Message-ID: <20001119151207.A700@ares.usinternet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i X-Mailer: No good GUI Email clients for x yet Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hey all, I have a LinkSys Etherfast (PCMPC100) PCMCIA nic and am trying to get it working under 4.1.1. When pccardd starts it says "No Card in Database for 'NULL' 'NULL' I even compiled it into the kernel ed0 and made sure the IRQ wasn't used and set the ioort to 0x300 which is where it's at under linux, iomem is set to 0xd8000 i think. I just get 'ed0 Device not configured' Is there a HOWTO or some docs on setting up a pcmcia NiC, I can't seem to get anything to work. I check the archives and saw nothing that looks like my problem. Is there a way to "probe" my card and see what's going on? pccardc dumpcis shows nothing about the card which works fine normally. TIA -- Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 Backup not found: (A)bort (R)etry (T)hrowup -------------------------------------------------------------------------------­ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 13:18:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id C148437B479 for ; Sun, 19 Nov 2000 13:18:46 -0800 (PST) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id QAA99258; Sun, 19 Nov 2000 16:18:45 -0500 (EST) (envelope-from mwlucas) Date: Sun, 19 Nov 2000 16:18:45 -0500 From: Michael Lucas To: Ben Lutgens Cc: mobile@FreeBSD.ORG Subject: Re: PCMPC100 pcmcia problems Message-ID: <20001119161845.A99242@blackhelicopters.org> References: <20001119151207.A700@ares.usinternet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2i In-Reply-To: <20001119151207.A700@ares.usinternet.com>; from blutgens@usinternet.com on Sun, Nov 19, 2000 at 03:12:07PM -0600 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org What does pccardc dumpcis say the card ID strings are? Make sure that they match the strings in pccardc.conf. I also see this problem if I boot from Windows into BSD without powering down. ==ml On Sun, Nov 19, 2000 at 03:12:07PM -0600, Ben Lutgens wrote: > Hey all, I have a LinkSys Etherfast (PCMPC100) PCMCIA nic and am trying to get > it working under 4.1.1. When pccardd starts it says "No Card in Database for > 'NULL' 'NULL' > > I even compiled it into the kernel ed0 and made sure the IRQ wasn't used and > set the ioort to 0x300 which is where it's at under linux, iomem is set to > 0xd8000 i think. I just get 'ed0 Device not configured' > > Is there a HOWTO or some docs on setting up a pcmcia NiC, I can't seem to get > anything to work. I check the archives and saw nothing that looks like my > problem. Is there a way to "probe" my card and see what's going on? > > pccardc dumpcis shows nothing about the card which works fine normally. > > TIA > -- > Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 > > > Backup not found: (A)bort (R)etry (T)hrowup > -------------------------------------------------------------------------------­ > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Michael Lucas mwlucas@blackhelicopters.org http://www.blackhelicopters.org/~mwlucas/ Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 13:37:33 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166]) by hub.freebsd.org (Postfix) with ESMTP id B429C37B479 for ; Sun, 19 Nov 2000 13:37:30 -0800 (PST) Received: from rac3.wam.umd.edu (IDENT:root@rac3.wam.umd.edu [128.8.10.143]) by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA26272; Sun, 19 Nov 2000 16:37:28 -0500 (EST) Received: from rac3.wam.umd.edu (IDENT:sendmail@localhost [127.0.0.1]) by rac3.wam.umd.edu (8.9.3/8.9.3) with SMTP id QAA24469; Sun, 19 Nov 2000 16:37:27 -0500 (EST) Received: from localhost (culverk@localhost) by rac3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA24451; Sun, 19 Nov 2000 16:37:27 -0500 (EST) X-Authentication-Warning: rac3.wam.umd.edu: culverk owned process doing -bs Date: Sun, 19 Nov 2000 16:37:27 -0500 (EST) From: Kenneth Wayne Culver To: Ben Lutgens Cc: mobile@FreeBSD.ORG Subject: Re: PCMPC100 pcmcia problems In-Reply-To: <20001119151207.A700@ares.usinternet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Is it a cardbus version or the 16-bit version? =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D | Kenneth Culver | FreeBSD: The best NT upgrade | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: muythaibxr | | The University of Maryland, | Website: (Under Construction) | | College Park.=09 | http://www.wam.umd.edu/~culverk/| =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D On Sun, 19 Nov 2000, Ben Lutgens wrote: > Hey all, I have a LinkSys Etherfast (PCMPC100) PCMCIA nic and am trying t= o get > it working under 4.1.1. When pccardd starts it says "No Card in Database = for > 'NULL' 'NULL' >=20 > I even compiled it into the kernel ed0 and made sure the IRQ wasn't used = and > set the ioort to 0x300 which is where it's at under linux, iomem is set t= o > 0xd8000 i think. I just get 'ed0 Device not configured' >=20 > Is there a HOWTO or some docs on setting up a pcmcia NiC, I can't seem to= get > anything to work. I check the archives and saw nothing that looks like my > problem. Is there a way to "probe" my card and see what's going on? >=20 > pccardc dumpcis shows nothing about the card which works fine normally. >=20 > TIA > --=20 > Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 >=20 >=20 > Backup not found: (A)bort (R)etry (T)hrowup > -------------------------------------------------------------------------= ------=AD >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 14:53: 5 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from plato.arnoth.net (cn602363-a.newcas1.de.home.com [24.40.46.21]) by hub.freebsd.org (Postfix) with ESMTP id 6205E37B4C5 for ; Sun, 19 Nov 2000 14:52:49 -0800 (PST) Received: from localhost (earnoth@localhost) by plato.arnoth.net (8.11.1/8.11.1) with ESMTP id eAJNulA48498 for ; Sun, 19 Nov 2000 18:56:48 -0500 (EST) (envelope-from earnoth@plato.arnoth.net) Date: Sun, 19 Nov 2000 18:56:47 -0500 (EST) From: "Eric I. Arnoth" To: mobile@FreeBSD.ORG Subject: kernel sound support on Toshiba Satellite In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1347274265-974678207=:317" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-1347274265-974678207=:317 Content-Type: TEXT/PLAIN; charset=US-ASCII All: I've been trying to compile my kernel on my FreeBSD 4.1.1 (cvsup'd/rebuilt on Nov 11) to include sound support for my Toshiba Satellite 4010CDS, but I've been running into trouble. My last install of FBSD on my Toshiba was 3.4, and my kernel config file for that install used the following lines for sound support: device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbmidi0 at isa? port 0x330 When I do a config with these lines, it tells me that sb0 is depecated. Upon consulting LINT, I discover the following: # For non-pnp sound cards with no bridge drivers only: device pcm0 at isa? irq 10 drq 1 flags 0x0 so I try that. When I compile, however (after running make clean; make depend) I get the errors shown in the attached file, error.txt. I have commented out stuff I don't need (see my attached kernel config file) which I think is causing the umass problems. I can't for the life of me figure out what I needed that I commented out. Could someone help me get my sound config files right? Also, if someone who knows could let me know what I commented out to get the umass errors, I would really appreciate it, as I can't compile until that's fixed. Thanks for your time, sorry for the long email. -Eric --0-1347274265-974678207=:317 Content-Type: TEXT/PLAIN; charset=US-ASCII; name=Toshiba Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Content-Disposition: attachment; filename=Toshiba Iw0KIyBHRU5FUklDIC0tIEdlbmVyaWMga2VybmVsIGNvbmZpZ3VyYXRpb24g ZmlsZSBmb3IgRnJlZUJTRC9pMzg2DQojDQojIEZvciBtb3JlIGluZm9ybWF0 aW9uIG9uIHRoaXMgZmlsZSwgcGxlYXNlIHJlYWQgdGhlIGhhbmRib29rIHNl Y3Rpb24gb24NCiMgS2VybmVsIENvbmZpZ3VyYXRpb24gRmlsZXM6DQojDQoj ICAgIGh0dHA6Ly93d3cuRnJlZUJTRC5vcmcvaGFuZGJvb2sva2VybmVsY29u ZmlnLWNvbmZpZy5odG1sDQojDQojIFRoZSBoYW5kYm9vayBpcyBhbHNvIGF2 YWlsYWJsZSBsb2NhbGx5IGluIC91c3Ivc2hhcmUvZG9jL2hhbmRib29rDQoj IGlmIHlvdSd2ZSBpbnN0YWxsZWQgdGhlIGRvYyBkaXN0cmlidXRpb24sIG90 aGVyd2lzZSBhbHdheXMgc2VlIHRoZQ0KIyBGcmVlQlNEIFdvcmxkIFdpZGUg V2ViIHNlcnZlciAoaHR0cDovL3d3dy5GcmVlQlNELm9yZy8pIGZvciB0aGUN CiMgbGF0ZXN0IGluZm9ybWF0aW9uLg0KIw0KIyBBbiBleGhhdXN0aXZlIGxp c3Qgb2Ygb3B0aW9ucyBhbmQgbW9yZSBkZXRhaWxlZCBleHBsYW5hdGlvbnMg b2YgdGhlDQojIGRldmljZSBsaW5lcyBpcyBhbHNvIHByZXNlbnQgaW4gdGhl IC4vTElOVCBjb25maWd1cmF0aW9uIGZpbGUuIElmIHlvdSBhcmUNCiMgaW4g ZG91YnQgYXMgdG8gdGhlIHB1cnBvc2Ugb3IgbmVjZXNzaXR5IG9mIGEgbGlu ZSwgY2hlY2sgZmlyc3QgaW4gTElOVC4NCiMNCiMgJEZyZWVCU0Q6IHNyYy9z eXMvaTM4Ni9jb25mL0dFTkVSSUMsdiAxLjI0Ni4yLjIwIDIwMDAvMTAvMzEg MjM6MTY6MDcgbl9oaWJtYSBFeHAgJA0KDQptYWNoaW5lCQlpMzg2DQpjcHUJ CUkzODZfQ1BVDQpjcHUJCUk0ODZfQ1BVDQpjcHUJCUk1ODZfQ1BVDQpjcHUJ CUk2ODZfQ1BVDQppZGVudAkJR0VORVJJQw0KbWF4dXNlcnMJMzINCg0KI21h a2VvcHRpb25zCURFQlVHPS1nCQkjQnVpbGQga2VybmVsIHdpdGggZ2RiKDEp IGRlYnVnIHN5bWJvbHMNCg0Kb3B0aW9ucyAJTUFUSF9FTVVMQVRFCQkjU3Vw cG9ydCBmb3IgeDg3IGVtdWxhdGlvbg0Kb3B0aW9ucyAJSU5FVAkJCSNJbnRl ck5FVHdvcmtpbmcNCm9wdGlvbnMgCUlORVQ2CQkJI0lQdjYgY29tbXVuaWNh dGlvbnMgcHJvdG9jb2xzDQpvcHRpb25zIAlGRlMJCQkjQmVya2VsZXkgRmFz dCBGaWxlc3lzdGVtDQpvcHRpb25zIAlGRlNfUk9PVAkJI0ZGUyB1c2FibGUg YXMgcm9vdCBkZXZpY2UgW2tlZXAgdGhpcyFdDQpvcHRpb25zIAlTT0ZUVVBE QVRFUwkJI0VuYWJsZSBGRlMgc29mdCB1cGRhdGVzIHN1cHBvcnQNCm9wdGlv bnMgCU1GUwkJCSNNZW1vcnkgRmlsZXN5c3RlbQ0Kb3B0aW9ucyAJTURfUk9P VAkJCSNNRCBpcyBhIHBvdGVudGlhbCByb290IGRldmljZQ0Kb3B0aW9ucyAJ TkZTCQkJI05ldHdvcmsgRmlsZXN5c3RlbQ0Kb3B0aW9ucyAJTkZTX1JPT1QJ CSNORlMgdXNhYmxlIGFzIHJvb3QgZGV2aWNlLCBORlMgcmVxdWlyZWQNCm9w dGlvbnMgCU1TRE9TRlMJCQkjTVNET1MgRmlsZXN5c3RlbQ0Kb3B0aW9ucyAJ Q0Q5NjYwCQkJI0lTTyA5NjYwIEZpbGVzeXN0ZW0NCm9wdGlvbnMgCUNEOTY2 MF9ST09UCQkjQ0QtUk9NIHVzYWJsZSBhcyByb290LCBDRDk2NjAgcmVxdWly ZWQNCm9wdGlvbnMgCVBST0NGUwkJCSNQcm9jZXNzIGZpbGVzeXN0ZW0NCm9w dGlvbnMgCUNPTVBBVF80MwkJI0NvbXBhdGlibGUgd2l0aCBCU0QgNC4zIFtL RUVQIFRISVMhXQ0KI29wdGlvbnMgCVNDU0lfREVMQVk9MTUwMDAJI0RlbGF5 IChpbiBtcykgYmVmb3JlIHByb2JpbmcgU0NTSQ0Kb3B0aW9ucyAJVUNPTlNP TEUJCSNBbGxvdyB1c2VycyB0byBncmFiIHRoZSBjb25zb2xlDQpvcHRpb25z IAlVU0VSQ09ORklHCQkjYm9vdCAtYyBlZGl0b3INCm9wdGlvbnMgCVZJU1VB TF9VU0VSQ09ORklHCSN2aXN1YWwgYm9vdCAtYyBlZGl0b3INCm9wdGlvbnMg CUtUUkFDRQkJCSNrdHJhY2UoMSkgc3VwcG9ydA0Kb3B0aW9ucyAJU1lTVlNI TQkJCSNTWVNWLXN0eWxlIHNoYXJlZCBtZW1vcnkNCm9wdGlvbnMgCVNZU1ZN U0cJCQkjU1lTVi1zdHlsZSBtZXNzYWdlIHF1ZXVlcw0Kb3B0aW9ucyAJU1lT VlNFTQkJCSNTWVNWLXN0eWxlIHNlbWFwaG9yZXMNCm9wdGlvbnMgCVAxMDAz XzFCCQkjUG9zaXggUDEwMDNfMUIgcmVhbC10aW1lIGV4dGVuc2lvbnMNCm9w dGlvbnMgCV9LUE9TSVhfUFJJT1JJVFlfU0NIRURVTElORw0Kb3B0aW9ucwkJ SUNNUF9CQU5ETElNCQkjUmF0ZSBsaW1pdCBiYWQgcmVwbGllcw0Kb3B0aW9u cyAJS0JEX0lOU1RBTExfQ0RFVgkjIGluc3RhbGwgYSBDREVWIGVudHJ5IGlu IC9kZXYNCg0KIyBUbyBtYWtlIGFuIFNNUCBrZXJuZWwsIHRoZSBuZXh0IHR3 byBhcmUgbmVlZGVkDQojb3B0aW9ucyAJU01QCQkJIyBTeW1tZXRyaWMgTXVs dGlQcm9jZXNzb3IgS2VybmVsDQojb3B0aW9ucyAJQVBJQ19JTwkJCSMgU3lt bWV0cmljIChBUElDKSBJL08NCg0KZGV2aWNlCQlpc2ENCmRldmljZQkJZWlz YQ0KZGV2aWNlCQlwY2kNCg0KIyBGbG9wcHkgZHJpdmVzDQpkZXZpY2UJCWZk YzAJYXQgaXNhPyBwb3J0IElPX0ZEMSBpcnEgNiBkcnEgMg0KZGV2aWNlCQlm ZDAJYXQgZmRjMCBkcml2ZSAwDQpkZXZpY2UJCWZkMQlhdCBmZGMwIGRyaXZl IDENCg0KIyBBVEEgYW5kIEFUQVBJIGRldmljZXMNCmRldmljZQkJYXRhMAlh dCBpc2E/IHBvcnQgSU9fV0QxIGlycSAxNA0KZGV2aWNlCQlhdGExCWF0IGlz YT8gcG9ydCBJT19XRDIgaXJxIDE1DQpkZXZpY2UJCWF0YQ0KZGV2aWNlCQlh dGFkaXNrCQkJIyBBVEEgZGlzayBkcml2ZXMNCmRldmljZQkJYXRhcGljZAkJ CSMgQVRBUEkgQ0RST00gZHJpdmVzDQpkZXZpY2UJCWF0YXBpZmQJCQkjIEFU QVBJIGZsb3BweSBkcml2ZXMNCmRldmljZQkJYXRhcGlzdAkJCSMgQVRBUEkg dGFwZSBkcml2ZXMNCm9wdGlvbnMgCUFUQV9TVEFUSUNfSUQJCSNTdGF0aWMg ZGV2aWNlIG51bWJlcmluZw0KI29wdGlvbnMgCUFUQV9FTkFCTEVfQVRBUElf RE1BCSNFbmFibGUgRE1BIG9uIEFUQVBJIGRldmljZXMNCg0KIyBTQ1NJIENv bnRyb2xsZXJzDQojZGV2aWNlCQlhaGIJCSMgRUlTQSBBSEExNzQyIGZhbWls eQ0KI2RldmljZQkJYWhjCQkjIEFIQTI5NDAgYW5kIG9uYm9hcmQgQUlDN3h4 eCBkZXZpY2VzDQojZGV2aWNlCQlhbWQJCSMgQU1EIDUzQzk3NCAoVGVja3Jh bSBEQy0zOTAoVCkpDQojZGV2aWNlCQlpc3AJCSMgUWxvZ2ljIGZhbWlseQ0K I2RldmljZQkJbmNyCQkjIE5DUi9TeW1iaW9zIExvZ2ljDQojZGV2aWNlCQlz eW0JCSMgTkNSL1N5bWJpb3MgTG9naWMgKG5ld2VyIGNoaXBzZXRzKQ0KI29w dGlvbnMJCVNZTV9TRVRVUF9MUF9QUk9CRV9NQVA9MHg0MA0KCQkJCSMgQWxs b3cgbmNyIHRvIGF0dGFjaCBsZWdhY3kgTkNSIGRldmljZXMgd2hlbiANCgkJ CQkjIGJvdGggc3ltIGFuZCBuY3IgYXJlIGNvbmZpZ3VyZWQNCg0KI2Rldmlj ZQkJYWR2MAlhdCBpc2E/DQojZGV2aWNlCQlhZHcNCiNkZXZpY2UJCWJ0MAlh dCBpc2E/DQojZGV2aWNlCQlhaGEwCWF0IGlzYT8NCiNkZXZpY2UJCWFpYzAJ YXQgaXNhPw0KDQojZGV2aWNlCQluY3YJCSMgTkNSIDUzQzUwMA0KI2Rldmlj ZQkJbnNwCQkjIFdvcmtiaXQgTmluamEgU0NTSS0zDQojZGV2aWNlCQlzdGcJ CSMgVE1DIDE4QzMwLzE4QzUwDQoNCiMgU0NTSSBwZXJpcGhlcmFscw0KI2Rl dmljZQkJc2NidXMJCSMgU0NTSSBidXMgKHJlcXVpcmVkKQ0KI2RldmljZQkJ ZGEJCSMgRGlyZWN0IEFjY2VzcyAoZGlza3MpDQojZGV2aWNlCQlzYQkJIyBT ZXF1ZW50aWFsIEFjY2VzcyAodGFwZSBldGMpDQojZGV2aWNlCQljZAkJIyBD RA0KI2RldmljZQkJcGFzcwkJIyBQYXNzdGhyb3VnaCBkZXZpY2UgKGRpcmVj dCBTQ1NJIGFjY2VzcykNCg0KIyBSQUlEIGNvbnRyb2xsZXJzIGludGVyZmFj ZWQgdG8gdGhlIFNDU0kgc3Vic3lzdGVtDQojZGV2aWNlCQlhc3IJCSMgRFBU IFNtYXJ0UkFJRCBWLCBWSSBhbmQgQWRhcHRlYyBTQ1NJIFJBSUQNCiNkZXZp Y2UJCWRwdAkJIyBEUFQgU21hcnRjYWNoZSAtIFNlZSBMSU5UIGZvciBvcHRp b25zIQ0KI2RldmljZQkJbWx5CQkjIE15bGV4IEFjY2VsZVJBSUQvZVh0cmVt ZVJBSUQNCg0KIyBSQUlEIGNvbnRyb2xsZXJzDQojZGV2aWNlCQlpZGEJCSMg Q29tcGFxIFNtYXJ0IFJBSUQNCiNkZXZpY2UJCWFtcgkJIyBBTUkgTWVnYVJB SUQNCiNkZXZpY2UJCW1seAkJIyBNeWxleCBEQUM5NjAgZmFtaWx5DQojZGV2 aWNlCQl0d2UJCSMgM3dhcmUgRXNjYWxhZGUNCiMNCiMgYXRrYmRjMCBjb250 cm9scyBib3RoIHRoZSBrZXlib2FyZCBhbmQgdGhlIFBTLzIgbW91c2UNCmRl dmljZQkJYXRrYmRjMAlhdCBpc2E/IHBvcnQgSU9fS0JEDQpkZXZpY2UJCWF0 a2JkMAlhdCBhdGtiZGM/IGlycSAxIGZsYWdzIDB4MQ0KZGV2aWNlCQlwc20w CWF0IGF0a2JkYz8gaXJxIDEyDQoNCmRldmljZQkJdmdhMAlhdCBpc2E/DQoN CiMgc3BsYXNoIHNjcmVlbi9zY3JlZW4gc2F2ZXINCnBzZXVkby1kZXZpY2UJ c3BsYXNoDQoNCiMgc3lzY29ucyBpcyB0aGUgZGVmYXVsdCBjb25zb2xlIGRy aXZlciwgcmVzZW1ibGluZyBhbiBTQ08gY29uc29sZQ0KZGV2aWNlCQlzYzAJ YXQgaXNhPyBmbGFncyAweDEwMA0KDQojIEVuYWJsZSB0aGlzIGFuZCBQQ1ZU X0ZSRUVCU0QgZm9yIHBjdnQgdnQyMjAgY29tcGF0aWJsZSBjb25zb2xlIGRy aXZlcg0KI2RldmljZQkJdnQwCWF0IGlzYT8NCiNvcHRpb25zIAlYU0VSVkVS CQkJIyBzdXBwb3J0IGZvciBYIHNlcnZlciBvbiBhIHZ0IGNvbnNvbGUNCiNv cHRpb25zIAlGQVRfQ1VSU09SCQkjIHN0YXJ0IHdpdGggYmxvY2sgY3Vyc29y DQojIElmIHlvdSBoYXZlIGEgVGhpbmtQQUQsIHVuY29tbWVudCB0aGlzIGFs b25nIHdpdGggdGhlIHJlc3Qgb2YgdGhlIFBDVlQgbGluZXMNCiNvcHRpb25z IAlQQ1ZUX1NDQU5TRVQ9MgkJIyBJQk0ga2V5Ym9hcmRzIGFyZSBub24tc3Rk DQoNCiMgRmxvYXRpbmcgcG9pbnQgc3VwcG9ydCAtIGRvIG5vdCBkaXNhYmxl Lg0KZGV2aWNlCQlucHgwCWF0IG5leHVzPyBwb3J0IElPX05QWCBpcnEgMTMN Cg0KIyBQb3dlciBtYW5hZ2VtZW50IHN1cHBvcnQgKHNlZSBMSU5UIGZvciBt b3JlIG9wdGlvbnMpDQpkZXZpY2UJCWFwbTAgICAgYXQgbmV4dXM/IGRpc2Fi bGUgZmxhZ3MgMHgyMCAjIEFkdmFuY2VkIFBvd2VyIE1hbmFnZW1lbnQNCg0K IyBQQ0NBUkQgKFBDTUNJQSkgc3VwcG9ydA0KZGV2aWNlCQljYXJkDQpkZXZp Y2UJCXBjaWMwCWF0IGlzYT8gaXJxIDAgcG9ydCAweDNlMCBpb21lbSAweGQw MDAwDQpkZXZpY2UJCXBjaWMxCWF0IGlzYT8gaXJxIDAgcG9ydCAweDNlMiBp b21lbSAweGQ0MDAwIGRpc2FibGUNCg0KIyBTZXJpYWwgKENPTSkgcG9ydHMN CmRldmljZQkJc2lvMAlhdCBpc2E/IHBvcnQgSU9fQ09NMSBmbGFncyAweDEw IGlycSA0DQpkZXZpY2UJCXNpbzEJYXQgaXNhPyBwb3J0IElPX0NPTTIgaXJx IDMNCmRldmljZQkJc2lvMglhdCBpc2E/IGRpc2FibGUgcG9ydCBJT19DT00z IGlycSA1DQpkZXZpY2UJCXNpbzMJYXQgaXNhPyBkaXNhYmxlIHBvcnQgSU9f Q09NNCBpcnEgOQ0KDQojIFBhcmFsbGVsIHBvcnQNCmRldmljZQkJcHBjMAlh dCBpc2E/IGlycSA3DQpkZXZpY2UJCXBwYnVzCQkjIFBhcmFsbGVsIHBvcnQg YnVzIChyZXF1aXJlZCkNCmRldmljZQkJbHB0CQkjIFByaW50ZXINCmRldmlj ZQkJcGxpcAkJIyBUQ1AvSVAgb3ZlciBwYXJhbGxlbA0KZGV2aWNlCQlwcGkJ CSMgUGFyYWxsZWwgcG9ydCBpbnRlcmZhY2UgZGV2aWNlDQojZGV2aWNlCQl2 cG8JCSMgUmVxdWlyZXMgc2NidXMgYW5kIGRhDQoNCg0KIyBQQ0kgRXRoZXJu ZXQgTklDcy4NCiNkZXZpY2UJCWRlCQkjIERFQy9JbnRlbCBEQzIxeDR4IChg YFR1bGlwJycpDQojZGV2aWNlCQlmeHAJCSMgSW50ZWwgRXRoZXJFeHByZXNz IFBSTy8xMDBCICg4MjU1NywgODI1NTgpDQojZGV2aWNlCQl0eAkJIyBTTUMg OTQzMlRYICg4M2MxNzAgYGBFUElDJycpDQojZGV2aWNlCQl2eAkJIyAzQ29t IDNjNTkwLCAzYzU5NSAoYGBWb3J0ZXgnJykNCiNkZXZpY2UJCXd4CQkjIElu dGVsIEdpZ2FiaXQgRXRoZXJuZXQgQ2FyZCAoYGBXaXNlbWFuJycpDQoNCiMg UENJIEV0aGVybmV0IE5JQ3MgdGhhdCB1c2UgdGhlIGNvbW1vbiBNSUkgYnVz IGNvbnRyb2xsZXIgY29kZS4NCiMgTk9URTogQmUgc3VyZSB0byBrZWVwIHRo ZSAnZGV2aWNlIG1paWJ1cycgbGluZSBpbiBvcmRlciB0byB1c2UgdGhlc2Ug TklDcyENCmRldmljZQkJbWlpYnVzCQkjIE1JSSBidXMgc3VwcG9ydA0KI2Rl dmljZQkJZGMJCSMgREVDL0ludGVsIDIxMTQzIGFuZCB2YXJpb3VzIHdvcmth bGlrZXMNCiNkZXZpY2UJCXBjbgkJIyBBTUQgQW03OUM3OXggUENJIDEwLzEw MCBOSUNzDQojZGV2aWNlCQlybAkJIyBSZWFsVGVrIDgxMjkvODEzOQ0KI2Rl dmljZQkJc2YJCSMgQWRhcHRlYyBBSUMtNjkxNSAoYGBTdGFyZmlyZScnKQ0K I2RldmljZQkJc2lzCQkjIFNpbGljb24gSW50ZWdyYXRlZCBTeXN0ZW1zIFNp UyA5MDAvU2lTIDcwMTYNCiNkZXZpY2UJCXN0ZQkJIyBTdW5kYW5jZSBTVDIw MSAoRC1MaW5rIERGRS01NTBUWCkNCiNkZXZpY2UJCXRsCQkjIFRleGFzIElu c3RydW1lbnRzIFRodW5kZXJMQU4NCiNkZXZpY2UJCXZyCQkjIFZJQSBSaGlu ZSwgUmhpbmUgSUkNCiNkZXZpY2UJCXdiCQkjIFdpbmJvbmQgVzg5Qzg0MEYN CiNkZXZpY2UJCXhsCQkjIDNDb20gM2M5MHggKGBgQm9vbWVyYW5nJycsIGBg Q3ljbG9uZScnKQ0KIw0KIyBJU0EgRXRoZXJuZXQgTklDcy4NCiNkZXZpY2UJ CWVkMAlhdCBpc2E/IHBvcnQgMHgyODAgaXJxIDEwIGlvbWVtIDB4ZDgwMDAN CiNkZXZpY2UJCWV4DQpkZXZpY2UJCWVwDQojZGV2aWNlCQlmZTAJYXQgaXNh PyBwb3J0IDB4MzAwDQojIFdhdmVMQU4vSUVFRSA4MDIuMTEgd2lyZWxlc3Mg TklDcy4gTm90ZTogdGhlIFdhdmVMQU4vSUVFRSByZWFsbHkNCiMgZXhpc3Rz IG9ubHkgYXMgYSBQQ01DSUEgZGV2aWNlLCBzbyB0aGVyZSBpcyBubyBJU0Eg YXR0YXRlbWVudCBuZWVkZWQNCiMgYW5kIHJlc291cmNlcyB3aWxsIGFsd2F5 cyBiZSBkeW5hbWljYWxseSBhc3NpZ25lZCBieSB0aGUgcGNjYXJkIGNvZGUu DQojZGV2aWNlCQl3aQ0KIyBBaXJvbmV0IDQ1MDAvNDgwMCA4MDIuMTEgd2ly ZWxlc3MgTklDcy4gTm90ZTogdGhlIGRlY2xhcmF0aW9uIGJlbG93IHdpbGwN CiMgd29yayBmb3IgUENNQ0lBIGFuZCBQQ0kgY2FyZHMsIGFzIHdlbGwgYXMg SVNBIGNhcmRzIHNldCB0byBJU0EgUG5QDQojIG1vZGUgKHRoZSBmYWN0b3J5 IGRlZmF1bHQpLiBJZiB5b3Ugc2V0IHRoZSBzd2l0Y2hlcyBvbiB5b3VyIElT QQ0KIyBjYXJkIGZvciBhIG1hbnVhbGx5IGNob3NlbiBJL08gYWRkcmVzcyBh bmQgSVJRLCB5b3UgbXVzdCBzcGVjaWZ5DQojIHRob3NlIHBhcmVtZXRlcnMg aGVyZS4NCiNkZXZpY2UJCWFuDQojIFhpcmNvbSBFdGhlcm5ldA0KI2Rldmlj ZQkJeGUNCiMgVGhlIHByb2JlIG9yZGVyIG9mIHRoZXNlIGlzIHByZXNlbnRs eSBkZXRlcm1pbmVkIGJ5IGkzODYvaXNhL2lzYV9jb21wYXQuYy4NCiNkZXZp Y2UJCWllMAlhdCBpc2E/IHBvcnQgMHgzMDAgaXJxIDEwIGlvbWVtIDB4ZDAw MDANCiNkZXZpY2UJCWxlMAlhdCBpc2E/IHBvcnQgMHgzMDAgaXJxIDUgaW9t ZW0gMHhkMDAwMA0KI2RldmljZQkJbG5jMAlhdCBpc2E/IHBvcnQgMHgyODAg aXJxIDEwIGRycSAwDQojZGV2aWNlCQljczAJYXQgaXNhPyBwb3J0IDB4MzAw DQojZGV2aWNlCQlzbjAJYXQgaXNhPyBwb3J0IDB4MzAwIGlycSAxMA0KDQoj IFBzZXVkbyBkZXZpY2VzIC0gdGhlIG51bWJlciBpbmRpY2F0ZXMgaG93IG1h bnkgdW5pdHMgdG8gYWxsb2NhdGVkLg0KcHNldWRvLWRldmljZQlsb29wCQkj IE5ldHdvcmsgbG9vcGJhY2sNCnBzZXVkby1kZXZpY2UJZXRoZXIJCSMgRXRo ZXJuZXQgc3VwcG9ydA0KcHNldWRvLWRldmljZQlzbAkxCSMgS2VybmVsIFNM SVANCnBzZXVkby1kZXZpY2UJcHBwCTEJIyBLZXJuZWwgUFBQDQpwc2V1ZG8t ZGV2aWNlCXR1bgkJIyBQYWNrZXQgdHVubmVsLg0KcHNldWRvLWRldmljZQlw dHkJCSMgUHNldWRvLXR0eXMgKHRlbG5ldCBldGMpDQpwc2V1ZG8tZGV2aWNl CW1kCQkjIE1lbW9yeSAiZGlza3MiDQpwc2V1ZG8tZGV2aWNlCWdpZgk0CSMg SVB2NiBhbmQgSVB2NCB0dW5uZWxpbmcNCnBzZXVkby1kZXZpY2UJZmFpdGgJ MQkjIElQdjYtdG8tSVB2NCByZWxheWluZyAodHJhbnNsYXRpb24pDQoNCiMg VGhlIGBicGYnIHBzZXVkby1kZXZpY2UgZW5hYmxlcyB0aGUgQmVya2VsZXkg UGFja2V0IEZpbHRlci4NCiMgQmUgYXdhcmUgb2YgdGhlIGFkbWluaXN0cmF0 aXZlIGNvbnNlcXVlbmNlcyBvZiBlbmFibGluZyB0aGlzIQ0KcHNldWRvLWRl dmljZQlicGYJCSNCZXJrZWxleSBwYWNrZXQgZmlsdGVyDQoNCiMgVVNCIHN1 cHBvcnQNCmRldmljZQkJdWhjaQkJIyBVSENJIFBDSS0+VVNCIGludGVyZmFj ZQ0KZGV2aWNlCQlvaGNpCQkjIE9IQ0kgUENJLT5VU0IgaW50ZXJmYWNlDQpk ZXZpY2UJCXVzYgkJIyBVU0IgQnVzIChyZXF1aXJlZCkNCmRldmljZQkJdWdl bgkJIyBHZW5lcmljDQpkZXZpY2UJCXVoaWQJCSMgIkh1bWFuIEludGVyZmFj ZSBEZXZpY2VzIg0KZGV2aWNlCQl1a2JkCQkjIEtleWJvYXJkDQpkZXZpY2UJ CXVscHQJCSMgUHJpbnRlcg0KZGV2aWNlCQl1bWFzcwkJIyBEaXNrcy9NYXNz IHN0b3JhZ2UgLSBSZXF1aXJlcyBzY2J1cyBhbmQgZGENCmRldmljZQkJdW1z CQkjIE1vdXNlDQpkZXZpY2UJCXVzY2FubmVyCSMgU2Nhbm5lcnMNCiMgVVNC IEV0aGVybmV0LCByZXF1aXJlcyBtaWkNCmRldmljZQkJYXVlCQkjIEFETXRl ayBVU0IgZXRoZXJuZXQNCmRldmljZQkJY3VlCQkjIENBVEMgVVNCIGV0aGVy bmV0DQpkZXZpY2UJCWt1ZQkJIyBLYXdhc2FraSBMU0kgVVNCIGV0aGVybmV0 DQoNCiMgU291bmQgc3VwcG9ydA0KIyBGb3Igbm9uLXBucCBzb3VuZCBjYXJk cyB3aXRoIG5vIGJyaWRnZSBkcml2ZXJzIG9ubHk6DQpkZXZpY2UgICAgICAg ICAgcGNtMCBhdCBpc2E/IGlycSAxMCBkcnEgMSBmbGFncyAweDANCiNkZXZp Y2UJCQlzbmQwDQpkZXZpY2UgICAgICAgICAgc2IwICAgICBhdCBpc2E/IHBv cnQgMHgyMjAgaXJxIDUgZHJxIDEgDQpkZXZpY2UgICAgICAgICAgc2JtaWRp MCBhdCBpc2E/IHBvcnQgMHgzMzANCg== --0-1347274265-974678207=:317 Content-Type: TEXT/PLAIN; charset=US-ASCII; name="errors.txt" Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Content-Disposition: attachment; filename="errors.txt" dW1hc3MubzogSW4gZnVuY3Rpb24gYHVtYXNzX2NhbV9hdHRhY2hfc2ltJzoN CnVtYXNzLm8oLnRleHQrMHgxMjU3KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0 byBgY2FtX3NpbXFfYWxsb2MnDQp1bWFzcy5vKC50ZXh0KzB4MTI3ZCk6IHVu ZGVmaW5lZCByZWZlcmVuY2UgdG8gYGNhbV9zaW1fYWxsb2MnDQp1bWFzcy5v KC50ZXh0KzB4MTI5Nik6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHhwdF9i dXNfcmVnaXN0ZXInDQp1bWFzcy5vKC50ZXh0KzB4MTJhNik6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYGNhbV9zaW1xX2ZyZWUnDQp1bWFzcy5vOiBJbiBm dW5jdGlvbiBgdW1hc3NfY2FtX3Jlc2Nhbl9jYWxsYmFjayc6DQp1bWFzcy5v KC50ZXh0KzB4MTJiZik6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHhwdF9m cmVlX3BhdGgnDQp1bWFzcy5vOiBJbiBmdW5jdGlvbiBgdW1hc3NfY2FtX3Jl c2Nhbic6DQp1bWFzcy5vKC50ZXh0KzB4MTMwOSk6IHVuZGVmaW5lZCByZWZl cmVuY2UgdG8gYHhwdF9wZXJpcGgnDQp1bWFzcy5vKC50ZXh0KzB4MTMxMik6 IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHhwdF9jcmVhdGVfcGF0aCcNCnVt YXNzLm8oLnRleHQrMHgxMzI1KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBg eHB0X3NldHVwX2NjYicNCnVtYXNzLm8oLnRleHQrMHgxMzQwKTogdW5kZWZp bmVkIHJlZmVyZW5jZSB0byBgeHB0X2FjdGlvbicNCnVtYXNzLm86IEluIGZ1 bmN0aW9uIGB1bWFzc19jYW1fZGV0YWNoX3NpbSc6DQp1bWFzcy5vKC50ZXh0 KzB4MTNmNyk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHhwdF9idXNfZGVy ZWdpc3RlcicNCnVtYXNzLm8oLnRleHQrMHgxNDE1KTogdW5kZWZpbmVkIHJl ZmVyZW5jZSB0byBgY2FtX3NpbV9mcmVlJw0KdW1hc3MubzogSW4gZnVuY3Rp b24gYHVtYXNzX2NhbV9kZXRhY2gnOg0KdW1hc3MubygudGV4dCsweDE0NTYp OiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGB4cHRfY3JlYXRlX3BhdGgnDQp1 bWFzcy5vKC50ZXh0KzB4MTQ3Nyk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8g YHhwdF9hc3luYycNCnVtYXNzLm8oLnRleHQrMHgxNDdmKTogdW5kZWZpbmVk IHJlZmVyZW5jZSB0byBgeHB0X2ZyZWVfcGF0aCcNCnVtYXNzLm86IEluIGZ1 bmN0aW9uIGB1bWFzc19jYW1fYWN0aW9uJzoNCnVtYXNzLm8oLnRleHQrMHgx NzlkKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgeHB0X2RvbmUnDQp1bWFz cy5vKC50ZXh0KzB4MTdhZCk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHhw dF9kb25lJw0KdW1hc3MubzogSW4gZnVuY3Rpb24gYHVtYXNzX2NhbV9jYic6 DQp1bWFzcy5vKC50ZXh0KzB4MThhMSk6IHVuZGVmaW5lZCByZWZlcmVuY2Ug dG8gYHhwdF9kb25lJw0KdW1hc3MubzogSW4gZnVuY3Rpb24gYHVtYXNzX2Nh bV9zZW5zZV9jYic6DQp1bWFzcy5vKC50ZXh0KzB4MTkxOCk6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYHhwdF9kb25lJw0KdW1hc3MubygudGV4dCsweDE5 MjkpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGB4cHRfZG9uZScNCmlzYV9j b21wYXQubyguZGF0YSsweDQpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBz YmRyaXZlcicNCmlzYV9jb21wYXQubyguZGF0YSsweGMpOiB1bmRlZmluZWQg cmVmZXJlbmNlIHRvIGBzYm1pZGlkcml2ZXInDQptaWRpX3N5bnRoLm86IElu IGZ1bmN0aW9uIGBtaWRpX291dGMnOg0KbWlkaV9zeW50aC5vKC50ZXh0KzB4 NGQpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBtaWRpX2RldnMnDQptaWRp X3N5bnRoLm86IEluIGZ1bmN0aW9uIGBwcmVmaXhfY21kJzoNCm1pZGlfc3lu dGgubygudGV4dCsweGEwKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgbWlk aV9kZXZzJw0KbWlkaV9zeW50aC5vOiBJbiBmdW5jdGlvbiBgbWlkaV9zeW50 aF9pbnB1dCc6DQptaWRpX3N5bnRoLm8oLnRleHQrMHhkZCk6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYG51bV9taWRpcycNCm1pZGlfc3ludGgubygudGV4 dCsweGZmKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgbWlkaV9kZXZzJw0K bWlkaV9zeW50aC5vOiBJbiBmdW5jdGlvbiBgbGVhdmVfc3lzZXgnOg0KbWlk aV9zeW50aC5vKC50ZXh0KzB4MmM2KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0 byBgc3ludGhfZGV2cycNCm1pZGlfc3ludGgubygudGV4dCsweDJlZik6IHVu ZGVmaW5lZCByZWZlcmVuY2UgdG8gYG1pZGlfZGV2cycNCm1pZGlfc3ludGgu bzogSW4gZnVuY3Rpb24gYG1pZGlfc3ludGhfaW9jdGwnOg0KbWlkaV9zeW50 aC5vKC50ZXh0KzB4MzUyKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgc3lu dGhfZGV2cycNCm1pZGlfc3ludGgubzogSW4gZnVuY3Rpb24gYG1pZGlfc3lu dGhfa2lsbF9ub3RlJzoNCm1pZGlfc3ludGgubygudGV4dCsweDM4Myk6IHVu ZGVmaW5lZCByZWZlcmVuY2UgdG8gYHN5bnRoX2RldnMnDQptaWRpX3N5bnRo Lm86IEluIGZ1bmN0aW9uIGBtaWRpX3N5bnRoX3NldF9pbnN0cic6DQptaWRp X3N5bnRoLm8oLnRleHQrMHg0YjIpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRv IGBzeW50aF9kZXZzJw0KbWlkaV9zeW50aC5vOiBJbiBmdW5jdGlvbiBgbWlk aV9zeW50aF9zdGFydF9ub3RlJzoNCm1pZGlfc3ludGgubygudGV4dCsweDUx Mik6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYHN5bnRoX2RldnMnDQptaWRp X3N5bnRoLm86IEluIGZ1bmN0aW9uIGBtaWRpX3N5bnRoX29wZW4nOg0KbWlk aV9zeW50aC5vKC50ZXh0KzB4NWYzKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0 byBgc3ludGhfZGV2cycNCm1pZGlfc3ludGgubygudGV4dCsweDYwMCk6IHVu ZGVmaW5lZCByZWZlcmVuY2UgdG8gYG51bV9taWRpcycNCm1pZGlfc3ludGgu bygudGV4dCsweDYzMCk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYG1pZGlf ZGV2cycNCm1pZGlfc3ludGgubzogSW4gZnVuY3Rpb24gYG1pZGlfc3ludGhf Y2xvc2UnOg0KbWlkaV9zeW50aC5vKC50ZXh0KzB4NmI0KTogdW5kZWZpbmVk IHJlZmVyZW5jZSB0byBgc3ludGhfZGV2cycNCm1pZGlfc3ludGgubygudGV4 dCsweDZjOSk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYG1pZGlfZGV2cycN Cm1pZGlfc3ludGgubzogSW4gZnVuY3Rpb24gYG1pZGlfc3ludGhfbG9hZF9w YXRjaCc6DQptaWRpX3N5bnRoLm8oLnRleHQrMHg3MGUpOiB1bmRlZmluZWQg cmVmZXJlbmNlIHRvIGBzeW50aF9kZXZzJw0KbWlkaV9zeW50aC5vKC50ZXh0 KzB4ODk1KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgbWlkaV9kZXZzJw0K bWlkaV9zeW50aC5vOiBJbiBmdW5jdGlvbiBgbWlkaV9zeW50aF9hZnRlcnRv dWNoJzoNCm1pZGlfc3ludGgubygudGV4dCsweDkxMik6IHVuZGVmaW5lZCBy ZWZlcmVuY2UgdG8gYHN5bnRoX2RldnMnDQptaWRpX3N5bnRoLm86IEluIGZ1 bmN0aW9uIGBtaWRpX3N5bnRoX2NvbnRyb2xsZXInOg0KbWlkaV9zeW50aC5v KC50ZXh0KzB4OWFhKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgc3ludGhf ZGV2cycNCm1pZGlfc3ludGgubzogSW4gZnVuY3Rpb24gYG1pZGlfc3ludGhf YmVuZGVyJzoNCm1pZGlfc3ludGgubygudGV4dCsweGE2Nik6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYHN5bnRoX2RldnMnDQptaWRpX3N5bnRoLm86IElu IGZ1bmN0aW9uIGBtaWRpX3N5bnRoX3NlbmRfc3lzZXgnOg0KbWlkaV9zeW50 aC5vKC50ZXh0KzB4YjIzKTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgc3lu dGhfZGV2cycNCm1pZGlfc3ludGgubygudGV4dCsweGJjOSk6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYG1pZGlfZGV2cycNCm1pZGlfc3ludGgubygudGV4 dCsweGMxMik6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYG1pZGlfZGV2cycN CioqKiBFcnJvciBjb2RlIDENCjEgZXJyb3INCg== --0-1347274265-974678207=:317-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 15:56:33 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lynx.aba.net.au (lynx.esec.com.au [203.21.84.1]) by hub.freebsd.org (Postfix) with SMTP id 4480C37B479 for ; Sun, 19 Nov 2000 15:56:27 -0800 (PST) Received: (qmail 14021 invoked from network); 19 Nov 2000 23:56:24 -0000 Received: from swun.esec.com.au (HELO eSec.com.au) (203.21.85.207) by lynx.esec.com.au with SMTP; 19 Nov 2000 23:56:24 -0000 Message-ID: <3A1868BF.4A209988@eSec.com.au> Date: Mon, 20 Nov 2000 10:56:47 +1100 From: Sam Wun Organization: eSec X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Bob Ney Cc: freebsd-mobile@freebsd.org Subject: Re: Can pc to pc communicate thru wireless LAN cards? References: <200011170152.SAA70989@harmony.village.org> <200011170318.TAA59503@sodium.cips.nokia.com> <14869.29305.27924.590563@nomad.yogotech.com> <3.0.6.32.20001117115736.01236100@pop.quiknet.com> Content-Type: text/plain; charset=gb2312 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org What brand are you using for your wireless LAN card/device and the amps? Do you have any documentation about how to setting it up with FreeBSD? Thanks Sam. Bob Ney wrote: > Did a 65 mile shot yesterday. Used 500mw amps, but it worked. > > At 10:04 AM 11/17/00 -0800, you wrote: > >i did 35 km clean line of sight down a mountain in indonesia, 7.5 km through > >trees in conakry guinea, ... simple equipment, appropriate antennas, good > >alignment. > > > >randy > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-mobile" in the body of the message > > > Bob Ney > Quiknet Inc. > Director Operations > (916) 782-9700 > bney@quiknet.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 16: 3:17 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 279F137B479 for ; Sun, 19 Nov 2000 16:03:14 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eAK03CQ20048; Sun, 19 Nov 2000 17:03:12 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id RAA93604; Sun, 19 Nov 2000 17:03:11 -0700 (MST) Message-Id: <200011200003.RAA93604@harmony.village.org> To: nate@yogotech.com (Nate Williams) Subject: Re: PCMCIA modems locking up system under 4.1.1 Cc: Mark Diekhans , freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Sun, 19 Nov 2000 09:58:53 MST." <14872.1741.13164.291719@nomad.yogotech.com> References: <14872.1741.13164.291719@nomad.yogotech.com> <200011190851.AAA97559@kermodei.com> Date: Sun, 19 Nov 2000 17:03:11 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <14872.1741.13164.291719@nomad.yogotech.com> Nate Williams writes: : The other way to avoid it is to 'power down' the card before removing : it, although I don't know if the 'power' code is in 4.x. If it is, you : should be able to power down the card before removing it w/out any : lockups. This code is in 4.x. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 16: 5:23 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id D49E437B479 for ; Sun, 19 Nov 2000 16:05:21 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eAK05KQ20070; Sun, 19 Nov 2000 17:05:20 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id RAA97763; Sun, 19 Nov 2000 17:05:20 -0700 (MST) Message-Id: <200011200005.RAA97763@harmony.village.org> To: Ben Lutgens Subject: Re: PCMPC100 pcmcia problems Cc: mobile@FreeBSD.ORG In-reply-to: Your message of "Sun, 19 Nov 2000 15:12:07 CST." <20001119151207.A700@ares.usinternet.com> References: <20001119151207.A700@ares.usinternet.com> Date: Sun, 19 Nov 2000 17:05:20 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <20001119151207.A700@ares.usinternet.com> Ben Lutgens writes: : Hey all, I have a LinkSys Etherfast (PCMPC100) PCMCIA nic and am : trying to get it working under 4.1.1. When pccardd starts it says : "No Card in Database for 'NULL' 'NULL' pccardd is likely using an address that's used by ROMs or something. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 17: 1:32 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from peorth.iteration.net (peorth.iteration.net [208.190.180.178]) by hub.freebsd.org (Postfix) with ESMTP id 6543137B4C5 for ; Sun, 19 Nov 2000 17:01:30 -0800 (PST) Received: by peorth.iteration.net (Postfix, from userid 1001) id 61D5857311; Sun, 19 Nov 2000 19:01:49 -0600 (CST) Date: Sun, 19 Nov 2000 19:01:49 -0600 From: "Michael C . Wu" To: "Eric I. Arnoth" Cc: mobile@FreeBSD.ORG Subject: Re: kernel sound support on Toshiba Satellite Message-ID: <20001119190149.A23989@peorth.iteration.net> Reply-To: "Michael C . Wu" References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from earnoth@plato.arnoth.net on Sun, Nov 19, 2000 at 06:56:47PM -0500 X-PGP-Fingerprint: 5025 F691 F943 8128 48A8 5025 77CE 29C5 8FA1 2E20 X-PGP-Key-ID: 0x8FA12E20 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 19, 2000 at 06:56:47PM -0500, Eric I. Arnoth scribbled: | All: | | I've been trying to compile my kernel on my FreeBSD 4.1.1 (cvsup'd/rebuilt | on Nov 11) to include sound support for my Toshiba Satellite 4010CDS, but | I've been running into trouble. My last install of FBSD on my Toshiba was | 3.4, and my kernel config file for that install used the following lines | for sound support: Simply the following line is sufficient: device pcm To resolve the usb issue, cvsup with tag=RELENG_4, build/installworld and build the new kernel with the new config. -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 17: 6:45 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from peorth.iteration.net (peorth.iteration.net [208.190.180.178]) by hub.freebsd.org (Postfix) with ESMTP id 37B2E37B479 for ; Sun, 19 Nov 2000 17:06:37 -0800 (PST) Received: by peorth.iteration.net (Postfix, from userid 1001) id 1A4B957311; Sun, 19 Nov 2000 19:06:56 -0600 (CST) Date: Sun, 19 Nov 2000 19:06:56 -0600 From: "Michael C . Wu" To: Claes Leufven Cc: freebsd-mobile@freebsd.org Subject: Re: APM problems with 5.0-20001112-CURRENT Message-ID: <20001119190655.B23989@peorth.iteration.net> Reply-To: "Michael C . Wu" Mail-Followup-To: "Michael C . Wu" , Claes Leufven , freebsd-mobile@freebsd.org References: <003901c050a8$61540d00$2a67a8c0@chewie.outherlimits.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <003901c050a8$61540d00$2a67a8c0@chewie.outherlimits.org>; from claes@griffel.se on Fri, Nov 17, 2000 at 04:09:27PM +0100 X-PGP-Fingerprint: 5025 F691 F943 8128 48A8 5025 77CE 29C5 8FA1 2E20 X-PGP-Key-ID: 0x8FA12E20 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 17, 2000 at 04:09:27PM +0100, Claes Leufven scribbled: | I have a Compaq Armada E500 and the apm support doesnt work. It seems that | the kernel doesnt find the apm controller just that it is on the pci bus. I | am using freebsd 5.0-20001112-current and have tried with both the generic | kernel and my custom kernel. in the kernel configuration I have just "device | apm" any one got any idea whats wrong? My dmesg output is in down under | here... APM is disabled by default in device.hint You need to change /boot/device.hints to comment the line that disables apm: #hint.apm.0.disabled="1" Also, you need this in your kernel device pmtimer and add this to boot/device.hints: hint.pmtimer.0.at="isa" -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 18: 4:34 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from kermodei.com (kermodei.com [216.103.110.74]) by hub.freebsd.org (Postfix) with ESMTP id 8C86237B479 for ; Sun, 19 Nov 2000 18:04:32 -0800 (PST) Received: (from markd@localhost) by kermodei.com (8.9.3/8.9.3) id SAA99300; Sun, 19 Nov 2000 18:04:32 -0800 (PST) (envelope-from markd@Kermodei.com) Date: Sun, 19 Nov 2000 18:04:32 -0800 (PST) Message-Id: <200011200204.SAA99300@kermodei.com> From: Mark Diekhans To: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <14872.1741.13164.291719@nomad.yogotech.com> References: <200011190851.AAA97559@kermodei.com> <14872.1741.13164.291719@nomad.yogotech.com> X-Mailer: VM 6.80 under Emacs 20.7.5 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hmm, spoke too soon. After the modem worked for hours, it lockup up the system twice in a few minutes (on IRQ 7, which I am 99% is not in use). How does one put a card in PIO mode; the pccardd complains about and invalid IRQ when 16 (or the `pio') is used? TIA, Mark Nate Williams writes: > > Hi folks, > > I am having problems with PCMICA modems locking up FreeBSD 4.1.1 > > on a laptop. This happens rather frequently, probably most often > > on card eject, although it happens other times as well. > > Lockups on eject is an occurance that can't be totally avoided. The > lockup can be minimized by *NOT* using polling (which makes the race > window much smaller). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 18:18:25 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.yogotech.com (ns.yogotech.com [206.127.123.66]) by hub.freebsd.org (Postfix) with ESMTP id 0368B37B479 for ; Sun, 19 Nov 2000 18:18:21 -0800 (PST) Received: from nomad.yogotech.com (nomad.yogotech.com [206.127.123.131]) by ns.yogotech.com (8.9.3/8.9.3) with ESMTP id TAA07928; Sun, 19 Nov 2000 19:18:19 -0700 (MST) (envelope-from nate@nomad.yogotech.com) Received: (from nate@localhost) by nomad.yogotech.com (8.8.8/8.8.8) id TAA13652; Sun, 19 Nov 2000 19:18:18 -0700 (MST) (envelope-from nate) From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14872.35306.357071.444755@nomad.yogotech.com> Date: Sun, 19 Nov 2000 19:18:18 -0700 (MST) To: Mark Diekhans Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <200011200204.SAA99300@kermodei.com> References: <200011190851.AAA97559@kermodei.com> <14872.1741.13164.291719@nomad.yogotech.com> <200011200204.SAA99300@kermodei.com> X-Mailer: VM 6.75 under 21.1 (patch 12) "Channel Islands" XEmacs Lucid Reply-To: nate@yogotech.com (Nate Williams) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Hmm, spoke too soon. After the modem worked for hours, it lockup > up the system twice in a few minutes (on IRQ 7, which I am 99% is > not in use). Ejecting the card, or you had a lockup of the system? If the latter, how do you know the modem caused it? > How does one put a card in PIO mode; the pccardd complains about > and invalid IRQ when 16 (or the `pio') is used? The modem won't work at all reliably in PIO mode. The interrupt load is difficult enough to keep up with in non-polled mode. If you polled the modem, you'd have so many overflows as to be useless. Or, are you talking about the PCIC controller (which generates insertion/removal event)? Nate > Nate Williams writes: > > > Hi folks, > > > I am having problems with PCMICA modems locking up FreeBSD 4.1.1 > > > on a laptop. This happens rather frequently, probably most often > > > on card eject, although it happens other times as well. > > > > Lockups on eject is an occurance that can't be totally avoided. The > > lockup can be minimized by *NOT* using polling (which makes the race > > window much smaller). > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 18:30:35 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from plato.arnoth.net (cn602363-a.newcas1.de.home.com [24.40.46.21]) by hub.freebsd.org (Postfix) with ESMTP id 3733337B479 for ; Sun, 19 Nov 2000 18:30:33 -0800 (PST) Received: from localhost (earnoth@localhost) by plato.arnoth.net (8.11.1/8.11.1) with ESMTP id eAK3Y7k03586; Sun, 19 Nov 2000 22:34:07 -0500 (EST) (envelope-from earnoth@plato.arnoth.net) Date: Sun, 19 Nov 2000 22:34:07 -0500 (EST) From: "Eric I. Arnoth" To: "Michael C . Wu" Cc: mobile@FreeBSD.ORG Subject: Re: kernel sound support on Toshiba Satellite In-Reply-To: <20001119190149.A23989@peorth.iteration.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Michael: Thanks much for your tips. I commented out all the USB stuff at the bottom, and used just the pcm device. My kernel compiled beautifully, and I'm running it now. I just need help on two more points, if you (or anyone else) please(s). > Simply the following line is sufficient: > device pcm Now that I've done this, I get the following errors when trying to use sound: unable to open /dev/mixer Can't open /dev/dsp I tried to create both devices, but for each one, I get: plato# sh ./MAKEDEV /dev/dsp /dev/dsp - no such device name plato# sh ./MAKEDEV /dev/mixer /dev/mixer - no such device name Are those devices (dsp & mixer) links to other devices? If so, what are the FreeBSD devices which I need to link them to? > To resolve the usb issue, cvsup with tag=RELENG_4, build/installworld > and build the new kernel with the new config. The thing I'm confused about here is that I did cvsup last weekend, and build/installed world then. I followed the handbook explicity (I was amazed at how relatively easy it was). While I have a USB port, I'm not using it, but would like to. Any idea why it wouldn't work even though I'm successfully tracking Stable? Thanks again for your help. -Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 18:58:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from kermodei.com (kermodei.com [216.103.110.74]) by hub.freebsd.org (Postfix) with ESMTP id 9ED7937B479 for ; Sun, 19 Nov 2000 18:58:17 -0800 (PST) Received: (from markd@localhost) by kermodei.com (8.9.3/8.9.3) id SAA99399; Sun, 19 Nov 2000 18:58:12 -0800 (PST) (envelope-from markd@Kermodei.com) From: Mark Diekhans MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14872.37687.827909.398015@osprey.Kermodei.Com> Date: Sun, 19 Nov 2000 18:57:59 -0800 To: nate@yogotech.com (Nate Williams) Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <14872.35306.357071.444755@nomad.yogotech.com> References: <200011190851.AAA97559@kermodei.com> <14872.1741.13164.291719@nomad.yogotech.com> <200011200204.SAA99300@kermodei.com> <14872.35306.357071.444755@nomad.yogotech.com> X-Mailer: VM 6.80 under Emacs 20.7.5 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Nate Williams writes: > > Hmm, spoke too soon. After the modem worked for hours, it lockup > > up the system twice in a few minutes (on IRQ 7, which I am 99% is > > not in use). > > Ejecting the card, or you had a lockup of the system? If the latter, > how do you know the modem caused it? No, not ejecting the card; but accessing the network over the modem. I don't know 100%; but I have never had a lockup when the modem was not in the machine and it generally seems to be associated with some kind of modem activity. Other that this, they system is rock solid. > The modem won't work at all reliably in PIO mode. The interrupt load is > difficult enough to keep up with in non-polled mode. If you polled the > modem, you'd have so many overflows as to be useless. Ok; thought it might be an interesting experiment. > Or, are you talking about the PCIC controller (which generates > insertion/removal event)? Hmm, might be a worth while experiment; at least would give me another IRQ to try. Is it enabled by setting the PCIC IRQ to 0? Any other ideas on how to isolate this appreciated. many thanks, Mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 19: 8:17 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.yogotech.com (ns.yogotech.com [206.127.123.66]) by hub.freebsd.org (Postfix) with ESMTP id BC31737B4C5 for ; Sun, 19 Nov 2000 19:08:14 -0800 (PST) Received: from nomad.yogotech.com (nomad.yogotech.com [206.127.123.131]) by ns.yogotech.com (8.9.3/8.9.3) with ESMTP id UAA08781; Sun, 19 Nov 2000 20:08:13 -0700 (MST) (envelope-from nate@nomad.yogotech.com) Received: (from nate@localhost) by nomad.yogotech.com (8.8.8/8.8.8) id UAA13965; Sun, 19 Nov 2000 20:08:12 -0700 (MST) (envelope-from nate) From: Nate Williams MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14872.38300.522850.106650@nomad.yogotech.com> Date: Sun, 19 Nov 2000 20:08:12 -0700 (MST) To: Mark Diekhans Cc: nate@yogotech.com (Nate Williams), freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA modems locking up system under 4.1.1 In-Reply-To: <14872.37687.827909.398015@osprey.Kermodei.Com> References: <200011190851.AAA97559@kermodei.com> <14872.1741.13164.291719@nomad.yogotech.com> <200011200204.SAA99300@kermodei.com> <14872.35306.357071.444755@nomad.yogotech.com> <14872.37687.827909.398015@osprey.Kermodei.Com> X-Mailer: VM 6.75 under 21.1 (patch 12) "Channel Islands" XEmacs Lucid Reply-To: nate@yogotech.com (Nate Williams) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > > Hmm, spoke too soon. After the modem worked for hours, it lockup > > > up the system twice in a few minutes (on IRQ 7, which I am 99% is > > > not in use). > > > > Ejecting the card, or you had a lockup of the system? If the latter, > > how do you know the modem caused it? > > No, not ejecting the card; but accessing the network over the modem. > I don't know 100%; but I have never had a lockup when the modem was > not in the machine and it generally seems to be associated with some kind > of modem activity. Other that this, they system is rock solid. IRQ 7 is a 'stray interrupt'. It may be related to the modem, or it may not be. > > The modem won't work at all reliably in PIO mode. The interrupt load is > > difficult enough to keep up with in non-polled mode. If you polled the > > modem, you'd have so many overflows as to be useless. > > Ok; thought it might be an interesting experiment. Interesting is probably a good word for it. :) > > Or, are you talking about the PCIC controller (which generates > > insertion/removal event)? > > Hmm, might be a worth while experiment; at least would give me another IRQ to > try. Is it enabled by setting the PCIC IRQ to 0? Nope, the modem IRQ is decided by whatever line matches in /etc/pccard.conf. It may have a hard-coded IRQ # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" 10 # The ethernet card is hard-coded to use IRQ 10 However, it could 'pick a free one', # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" ? # ? - Pick a free one based on the list of available interrupts from the # top of the file. Those that haven't already been assigned can be # assigned. Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 20:31:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.usinternet.com (smtp.usinternet.com [216.17.3.30]) by hub.freebsd.org (Postfix) with ESMTP id 7168037B4CF for ; Sun, 19 Nov 2000 20:31:24 -0800 (PST) Received: from ares.usinternet.com ([216.17.55.137]) by smtp.usinternet.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with SMTP id com for ; Sun, 19 Nov 2000 22:31:19 -0600 Received: by ares.usinternet.com (sSMTP sendmail emulation); Sun, 19 Nov 2000 22:31:18 -0600 Date: Sun, 19 Nov 2000 22:31:18 -0600 From: Ben Lutgens To: mobile@freebsd.org Subject: PCMPC100 problem still not working Message-ID: <20001119223118.A1052@ares.usinternet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i X-Mailer: No good GUI Email clients for x yet Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org O.k. I am a little confused about the kernel / driver / pccardd separation. Does pccardd need drivers and stuff compiled in the kernel? I have the line device ed0 at isa? port 0x300 irq 9 iomem 0xd8000 in my config file for my kernel. and I see an ed1 show up in output from pccardd and I keep getting ed1 timed out in the logs and the card is essentially useless even though I get a nice "BEEP" that tells me my card is alive and well and the interface shows up I can't ping anything. when I comment this line out of the kernel config and recompile i get unable to allocate driver error which makes me think it should be compiled in. the exact lines are ed0: Device not configured (then the lines showing that my card matched the def in pccard.conf) pccardd:[53]: driver allocation failed for Linksys Etherfast 10/100 PC Card (PCMPC100 V2)): Device not configured Pccardf started. also, my box hangs during "local package initialization" and needs a ^c to continue for some reason. can anyone tell me where to look to fix that. once again the relevant files are rc.conf pccard_enable="yes" pccard_mem="0xd8000" pccard_beep="1" pccard_ifconfig="inet MYIP netmask 255.255.255.248" pccard_conf="/etc/pccard.conf" pccard.conf io 0x240-0x260 irq 9 13 card "Linksys" "Etherfast 10/100 PC Card (PCMPC100 V2)" config 0x3 "ed" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete -- Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 Backup not found: (A)bort (R)etry (T)hrowup -------------------------------------------------------------------------------­ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Nov 19 20:52:39 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ultra2.quiknet.com (ultra2.quiknet.com [207.183.249.4]) by hub.freebsd.org (Postfix) with SMTP id 584D937B479 for ; Sun, 19 Nov 2000 20:52:32 -0800 (PST) Received: (qmail 5634 invoked from network); 20 Nov 2000 04:52:28 -0000 Received: from bob200.quiknet.com (HELO bob400) (207.183.229.242) by ultra2.quiknet.com with SMTP; 20 Nov 2000 04:52:28 -0000 Message-Id: <4.2.2.20001119204741.00ad95e0@ultra2.quiknet.com> X-Sender: bney@ultra2.quiknet.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Sun, 19 Nov 2000 20:51:56 -0800 To: Sam Wun From: Bob Subject: Re: Can pc to pc communicate thru wireless LAN cards, long distance Cc: freebsd-mobile@freebsd.org In-Reply-To: <3A1868BF.4A209988@eSec.com.au> References: <200011170152.SAA70989@harmony.village.org> <200011170318.TAA59503@sodium.cips.nokia.com> <14869.29305.27924.590563@nomad.yogotech.com> <3.0.6.32.20001117115736.01236100@pop.quiknet.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org We are using Lucent Wavelan silver cards, 24 DB antenna on one end and a 13DB sectional antenna on the other, and smartamps on both ends which take the transmission power to the legal limit. We are using the PAO distribution under FreeBSD 3.5.1 Nothing real special. Just a clear line of sight. One end is the freeBSD box and the other is a Lucent Access point. The access point is not necessary in a peer to peer setup, we just used it so that we could easily see the link quality and error stats. At 10:56 AM 11/20/00 +1100, you wrote: >What brand are you using for your wireless LAN card/device and the amps? >Do you >have any documentation about how to setting it up with FreeBSD? > >Thanks >Sam. > >Bob Ney wrote: > > > Did a 65 mile shot yesterday. Used 500mw amps, but it worked. > > > > At 10:04 AM 11/17/00 -0800, you wrote: > > >i did 35 km clean line of sight down a mountain in indonesia, 7.5 km > through > > >trees in conakry guinea, ... simple equipment, appropriate antennas, good > > >alignment. > > > > > >randy > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > > >with "unsubscribe freebsd-mobile" in the body of the message > > > > > Bob Ney > > Quiknet Inc. > > Director Operations > > (916) 782-9700 > > bney@quiknet.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 0:10:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.numachi.com (numachi.numachi.com [198.175.254.2]) by hub.freebsd.org (Postfix) with SMTP id 5FAD037B479 for ; Mon, 20 Nov 2000 00:10:25 -0800 (PST) Received: (qmail 9333 invoked by uid 3001); 20 Nov 2000 08:10:15 -0000 Received: from natto.numachi.com (198.175.254.216) by numachi.numachi.com with SMTP; 20 Nov 2000 08:10:15 -0000 Received: (qmail 9575 invoked by uid 1001); 20 Nov 2000 08:10:15 -0000 Date: Mon, 20 Nov 2000 03:10:15 -0500 From: Brian Reichert To: Ben Lutgens Cc: mobile@freebsd.org Subject: Re: PCMPC100 problem still not working Message-ID: <20001120031015.A9537@numachi.com> References: <20001119223118.A1052@ares.usinternet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: <20001119223118.A1052@ares.usinternet.com>; from blutgens@usinternet.com on Sun, Nov 19, 2000 at 10:31:18PM -0600 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 19, 2000 at 10:31:18PM -0600, Ben Lutgens wrote: I had to make a couple of changes for my el cheapo LinkSys card; see if they work for you: > O.k. I am a little confused about the kernel / driver / pccardd separation. > Does pccardd need drivers and stuff compiled in the kernel? > I have the line > device ed0 at isa? port 0x300 irq 9 iomem 0xd8000 in my config file for try replacing this with: device ed > my kernel. and I see an ed1 show up in output from pccardd and I keep getting > ed1 timed out in the logs and the card is essentially useless even though I > get a nice "BEEP" that tells me my card is alive and well and the interface > shows up I can't ping anything. > > when I comment this line out of the kernel config and recompile i get unable > to allocate driver error which makes me think it should be compiled in. > > the exact lines are > ed0: Device not configured > (then the lines showing that my card matched the def in pccard.conf) > pccardd:[53]: driver allocation failed for Linksys Etherfast 10/100 PC Card > (PCMPC100 V2)): Device not configured Pccardf started. > > also, my box hangs during "local package initialization" and needs a ^c to > continue for some reason. can anyone tell me where to look to fix that. > > once again the relevant files are > rc.conf > pccard_enable="yes" > pccard_mem="0xd8000" > pccard_beep="1" > pccard_ifconfig="inet MYIP netmask 255.255.255.248" > pccard_conf="/etc/pccard.conf" > > pccard.conf > io 0x240-0x260 > irq 9 13 > card "Linksys" "Etherfast 10/100 PC Card (PCMPC100 V2)" > config 0x3 "ed" ? Try config default "ed" ? > insert /etc/pccard_ether $device > remove /sbin/ifconfig $device delete > > -- > Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 > > > Backup not found: (A)bort (R)etry (T)hrowup > -------------------------------------------------------------------------------­ -- Brian 'you Bastard' Reichert 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA Intel architecture: the left-hand path To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 0:11:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from aphex.peterson.org (aphex.peterson.org [209.228.7.160]) by hub.freebsd.org (Postfix) with ESMTP id 8727337B4CF for ; Mon, 20 Nov 2000 00:11:57 -0800 (PST) Received: from aphex.peterson.org (aphex.peterson.org [209.228.7.160]) by aphex.peterson.org (8.9.3/8.9.3) with ESMTP id AAA02213; Mon, 20 Nov 2000 00:10:59 -0800 (PST) Date: Mon, 20 Nov 2000 00:10:59 -0800 (PST) From: Matt Peterson To: Bob Cc: Sam Wun , Subject: Re: Can pc to pc communicate thru wireless LAN cards, long distance In-Reply-To: <4.2.2.20001119204741.00ad95e0@ultra2.quiknet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org These sort of content has been hashed over a number of times on other mailing lists: Wireless ISPs using 2.4 and 5.8ghz equipment. Some list members have Linux/FreeBSD clue. Bay Area Wireless User Group, a majority of members use FreeBSD. -- Matt Peterson another.geek.without.a.life matt@peterson.org http://matt.peterson.org/ ------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 0:12:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from peorth.iteration.net (peorth.iteration.net [208.190.180.178]) by hub.freebsd.org (Postfix) with ESMTP id 53FBE37B479 for ; Mon, 20 Nov 2000 00:12:26 -0800 (PST) Received: by peorth.iteration.net (Postfix, from userid 1001) id 91A1457311; Mon, 20 Nov 2000 02:12:44 -0600 (CST) Date: Mon, 20 Nov 2000 02:12:44 -0600 From: "Michael C . Wu" To: "Eric I. Arnoth" Cc: mobile@FreeBSD.ORG Subject: Re: kernel sound support on Toshiba Satellite Message-ID: <20001120021244.A93933@peorth.iteration.net> Reply-To: "Michael C . Wu" References: <20001119190149.A23989@peorth.iteration.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from earnoth@plato.arnoth.net on Sun, Nov 19, 2000 at 10:34:07PM -0500 X-PGP-Fingerprint: 5025 F691 F943 8128 48A8 5025 77CE 29C5 8FA1 2E20 X-PGP-Key-ID: 0x8FA12E20 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 19, 2000 at 10:34:07PM -0500, Eric I. Arnoth scribbled: | Michael: | | Thanks much for your tips. I commented out all the USB stuff at the | bottom, and used just the pcm device. My kernel compiled beautifully, and | I'm running it now. I just need help on two more points, if you (or | anyone else) please(s). | | > Simply the following line is sufficient: | > device pcm cd /dev ; sh MAKEDEV snd0 man mixer -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 7:21:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from smtp.usinternet.com (smtp.usinternet.com [216.17.3.30]) by hub.freebsd.org (Postfix) with ESMTP id DE7AC37B479 for ; Mon, 20 Nov 2000 07:21:54 -0800 (PST) Received: from ares.usinternet.com ([216.17.55.137]) by smtp.usinternet.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with SMTP id com for ; Mon, 20 Nov 2000 09:21:53 -0600 Received: by ares.usinternet.com (sSMTP sendmail emulation); Mon, 20 Nov 2000 09:21:51 -0600 Date: Mon, 20 Nov 2000 09:21:51 -0600 From: Ben Lutgens To: mobile@freebsd.org Subject: PCMPC100 error (FIXED) Message-ID: <20001120092151.A4260@ares.usinternet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i X-Mailer: No good GUI Email clients for x yet Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, color me a newbie. after changing my kernel config line to device ed and having a pccard.conf with io 0x240-0x360 irw 9 13 card "Linksys" "Etherfast 10/100 PC Card (PCMPC100 V2)" config auto "ed" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete and rc.conf with pccard_mem="0xd8000" pccard_ifconfig="inet IP.ADDR.HERE netmask" defaultrouter="GW.IP.HERE" pccard_conf="/etc/pccard.conf" pccard_beep="1" pccard_enable="YES" the card works fine. Thanks for all your help everyone. -- Ben Lutgens Cell: 651.387.9065 Home: 651.703.9541 Backup not found: (A)bort (R)etry (T)hrowup -------------------------------------------------------------------------------­ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 11:29:13 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by hub.freebsd.org (Postfix) with ESMTP id 7E67837B479 for ; Mon, 20 Nov 2000 11:29:10 -0800 (PST) Received: from randy by rip.psg.com with local (Exim 3.16 #1) id 13xwcn-000ACj-00 for freebsd-mobile@freebsd.org; Mon, 20 Nov 2000 11:29:09 -0800 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: FreeBSD Laptoppers Subject: 3.5.1 Message-Id: Date: Mon, 20 Nov 2000 11:29:09 -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org there is no RELENG_3_5_1_RELEASE tag. evidently jkh decided against it. so how are folk fetching 3.5.1 in order to apply PAO3-20001021.tar.gz? the RELENG_3 tag? randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 12: 0:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.village.org [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 0369737B479 for ; Mon, 20 Nov 2000 12:00:06 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eAKK04Q26285; Mon, 20 Nov 2000 13:00:04 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id NAA26351; Mon, 20 Nov 2000 13:00:04 -0700 (MST) Message-Id: <200011202000.NAA26351@harmony.village.org> To: Randy Bush Subject: Re: 3.5.1 Cc: FreeBSD Laptoppers In-reply-to: Your message of "Mon, 20 Nov 2000 11:29:09 PST." References: Date: Mon, 20 Nov 2000 13:00:04 -0700 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Randy Bush writes: : there is no RELENG_3_5_1_RELEASE tag. evidently jkh decided against it. : so how are folk fetching 3.5.1 in order to apply PAO3-20001021.tar.gz? : the RELENG_3 tag? There has been little enough applied to 3.x since 3.5.1 that PAO3 should apply to it. I take it that you tried it and it failed? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Nov 20 12: 5:15 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by hub.freebsd.org (Postfix) with ESMTP id 422EC37B479 for ; Mon, 20 Nov 2000 12:05:13 -0800 (PST) Received: from randy by rip.psg.com with local (Exim 3.16 #1) id 13xxBb-000AXh-00; Mon, 20 Nov 2000 12:05:07 -0800 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Warner Losh Cc: FreeBSD Laptoppers Subject: Re: 3.5.1 References: <200011202000.NAA26351@harmony.village.org> Message-Id: Date: Mon, 20 Nov 2000 12:05:07 -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> there is no RELENG_3_5_1_RELEASE tag. evidently jkh decided against it. >> so how are folk fetching 3.5.1 in order to apply PAO3-20001021.tar.gz? >> the RELENG_3 tag? > There has been little enough applied to 3.x since 3.5.1 that PAO3 > should apply to it. I take it that you tried it and it failed? nope, am cvsupping now and worrying about unpredictable results randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 0: 5:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ultra2.quiknet.com (ultra2.quiknet.com [207.183.249.4]) by hub.freebsd.org (Postfix) with SMTP id 7225C37B4C5 for ; Tue, 21 Nov 2000 00:05:48 -0800 (PST) Received: (qmail 27064 invoked from network); 21 Nov 2000 08:05:46 -0000 Received: from bob200.quiknet.com (HELO bob400) (207.183.229.242) by ultra2.quiknet.com with SMTP; 21 Nov 2000 08:05:46 -0000 Message-Id: <4.2.2.20001121000416.00af4100@ultra2.quiknet.com> X-Sender: bney@ultra2.quiknet.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Tue, 21 Nov 2000 00:05:06 -0800 To: freebsd-mobile@FreeBSD.ORG From: Bob Subject: Re: 3.5.1 In-Reply-To: <200011202000.NAA26351@harmony.village.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I simply changed the release in options to 3.5.1-RELEASE and loaded from the main ftp server. Works fine. Did three systems today. At 01:00 PM 11/20/00 -0700, you wrote: >freebsd-mobile@FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 0:26:11 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from atlantis.erlm.siemens.de (atlantis.erlm.siemens.de [212.114.202.14]) by hub.freebsd.org (Postfix) with ESMTP id 5ACE137B479 for ; Tue, 21 Nov 2000 00:26:08 -0800 (PST) Received: from mail01.erlm.siemens.de (mail01.erlm.siemens.de [146.254.160.12]) by atlantis.erlm.siemens.de (8.9.3/8.9.3) with ESMTP id JAA22917 for ; Tue, 21 Nov 2000 09:26:01 +0100 (MET) Received: from erlm510a.erl9.siemens.de (erlm510a.erl9.siemens.de [146.254.168.221]) by mail01.erlm.siemens.de (8.9.3+Sun/8.9.3) with ESMTP id JAA22045 for ; Tue, 21 Nov 2000 09:25:35 +0100 (MET) Received: by erlm510a.erl9.siemens.de with Internet Mail Service (5.5.2650.21) id ; Tue, 21 Nov 2000 09:25:29 +0100 Message-ID: <1F69DAAD3391D411BE5300805FBED48B496BE6@ERLM511A.erl9.siemens.de> From: Burbaickij Ariel To: "'freebsd-mobile@freebsd.org'" Subject: Where to get full list of supported PCMCIA ethernet adapters ? Date: Tue, 21 Nov 2000 09:25:20 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Question means among other things that Release Compatibility list is NOT complete so e.g. Intel EtherExpress in PCMCIA is NOT presented there(for 4.1.1). So were is the complete list ? Regards. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 6: 7:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.osd.bsdi.com (dhcp250.osd.bsdi.com [204.216.28.250]) by hub.freebsd.org (Postfix) with ESMTP id 6567D37B4CF for ; Tue, 21 Nov 2000 06:07:40 -0800 (PST) Received: from mass.osd.bsdi.com (localhost [127.0.0.1]) by mass.osd.bsdi.com (8.11.0/8.11.1) with ESMTP id eALEEmF01079; Tue, 21 Nov 2000 06:14:48 -0800 (PST) (envelope-from msmith@mass.osd.bsdi.com) Message-Id: <200011211414.eALEEmF01079@mass.osd.bsdi.com> X-Mailer: exmh version 2.1.1 10/15/1999 To: Burbaickij Ariel Cc: "'freebsd-mobile@freebsd.org'" Subject: Re: Where to get full list of supported PCMCIA ethernet adapters ? In-reply-to: Your message of "Tue, 21 Nov 2000 09:25:20 +0100." <1F69DAAD3391D411BE5300805FBED48B496BE6@ERLM511A.erl9.siemens.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 21 Nov 2000 06:14:48 -0800 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Question means among other things that Release Compatibility list is NOT > complete so e.g. Intel EtherExpress in PCMCIA is NOT presented there(for > 4.1.1). > So were is the complete list ? There isn't one. There's a list of recognised cards (not quite the same thing) in /etc/defaults/pccard.conf -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] V I C T O R Y N O T V E N G E A N C E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 13:34: 5 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from finch-post-10.mail.demon.net (finch-post-10.mail.demon.net [194.217.242.38]) by hub.freebsd.org (Postfix) with ESMTP id 38C1C37B479 for ; Tue, 21 Nov 2000 13:34:03 -0800 (PST) Received: from myrddin.demon.co.uk ([158.152.54.180] helo=ppe.happygiraffe.net) by finch-post-10.mail.demon.net with esmtp (Exim 2.12 #1) id 13yL3B-0005oq-0A for freebsd-mobile@freebsd.org; Tue, 21 Nov 2000 21:34:02 +0000 Received: by ppe.happygiraffe.net (Postfix, from userid 1000) id E4A54217; Tue, 21 Nov 2000 21:34:07 +0000 (GMT) Date: Tue, 21 Nov 2000 21:34:07 +0000 To: freebsd-mobile@freebsd.org Subject: USB & PCCard together... Message-ID: <20001121213407.A881@ppe.happygiraffe.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Warning: Incoming message from The Big Giant Head! X-OS: FreeBSD 4.2-BETA i386 X-Uptime: 8:24PM up 2 mins, 4 users, load averages: 0.18, 0.06, 0.02 From: dom@happygiraffe.net (Dominic Mitchell) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've recently gotten a Sony Vaio Z600TEK and installed FreeBSD 4.1.1 on it and all seems fairly well. However, I have discovered one problem. When I booted up, these messages appeared in dmesg: uhci0: port 0xfc60-0xfc7f at device 7.2 on pci0 uhci0: Invalid irq 255 uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS device_probe_and_attach: uhci0 attach returned 6 So, I switched it off in the BIOS, rebooted and the USB ports worked fine. But then, when I inserted a PC-Card (I tried several different ones), they all came up as "(null)"("(null)"), instead of the proper identifiers. But when I turned that particular BIOS option to "Yes", then the PC-Card's started working normally. But the USB stopped working. Has anybody else seen this? Is there any way of getting my USB and PC Cards working together? More details, dmesg output, etc available on request. Thanks, -Dom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 13:37:44 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by hub.freebsd.org (Postfix) with ESMTP id 01E7237B4CF for ; Tue, 21 Nov 2000 13:37:42 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 13yL6d-0006hC-00 for freebsd-mobile@freebsd.org; Tue, 21 Nov 2000 16:37:35 -0500 Date: Tue, 21 Nov 2000 16:37:35 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Subject: Re: USB & PCCard together... Message-ID: <20001121163734.E23140@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <20001121213407.A881@ppe.happygiraffe.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001121213407.A881@ppe.happygiraffe.net>; from dom@happygiraffe.net on Tue, Nov 21, 2000 at 09:34:07PM +0000 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Dominic Mitchell probably said: > So, I switched it off in the BIOS, rebooted and the USB ports worked > fine. But then, when I inserted a PC-Card (I tried several different > ones), they all came up as "(null)"("(null)"), instead of the proper > identifiers. Change the IRQ and/or memory addresses the pcmcia controller is using. P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 18: 7:17 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mercury.powersurge.net (mercury.powersurge.net [216.218.200.200]) by hub.freebsd.org (Postfix) with ESMTP id 1490137B4CF for ; Tue, 21 Nov 2000 18:07:16 -0800 (PST) Received: from artemis.ultraservers.net ([216.218.200.199] helo=Debug) by mercury.powersurge.net with smtp (Exim 3.14 #1) id 13yPJa-0000Kw-00 for freebsd-mobile@freebsd.org; Tue, 21 Nov 2000 18:07:14 -0800 To: freebsd-mobile@freebsd.org From: Subject: Comapq presario 1625 sound Date: Wed, 22 Nov 2000 02:07:14 GMT X-Mailer: Endymion MailMan Professional Edition v3.0.18 Message-Id: Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I have FreeBSD 4.1.1 running on a comaq presario 1625 laptop. I am not sure about how to get the sound working on this machine. Do I just need to add device pcm to the kernel or should I use something else on this laptop? Thanks Adam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Nov 21 23:11:25 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from atlantis.erlm.siemens.de (atlantis.erlm.siemens.de [212.114.202.14]) by hub.freebsd.org (Postfix) with ESMTP id A87A637B4CF; Tue, 21 Nov 2000 23:11:22 -0800 (PST) Received: from mail01.erlm.siemens.de (mail01.erlm.siemens.de [146.254.160.12]) by atlantis.erlm.siemens.de (8.9.3/8.9.3) with ESMTP id IAA24369; Wed, 22 Nov 2000 08:11:20 +0100 (MET) Received: from erlm510a.erl9.siemens.de (erlm510a.erl9.siemens.de [146.254.168.221]) by mail01.erlm.siemens.de (8.9.3+Sun/8.9.3) with ESMTP id IAA29851; Wed, 22 Nov 2000 08:10:54 +0100 (MET) Received: by erlm510a.erl9.siemens.de with Internet Mail Service (5.5.2650.21) id ; Wed, 22 Nov 2000 08:11:04 +0100 Message-ID: <1F69DAAD3391D411BE5300805FBED48B496BE7@ERLM511A.erl9.siemens.de> From: Burbaickij Ariel To: "'Mike Smith'" Cc: "'mobile@freebsd.org'" Subject: AW: Where to get full list of supported PCMCIA ethernet adapters ? Date: Wed, 22 Nov 2000 08:10:53 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org -----Urspr=FCngliche Nachricht----- Von: Mike Smith [mailto:msmith@freebsd.org] Gesendet am: Dienstag, 21. November 2000 15:15 An: Burbaickij Ariel Cc: 'freebsd-mobile@freebsd.org' Betreff: Re: Where to get full list of supported PCMCIA ethernet adapters ?=20 > Question means among other things that Release Compatibility list is = NOT > complete so e.g. Intel EtherExpress in PCMCIA is NOT presented = there(for > 4.1.1). > So were is the complete list ? There isn't one. There's a list of recognised cards (not quite the = same=20 thing) What is the difference ? Is it secure(in terms of card listed in pccard.conf working properly) to use one from the pccard.conf list ? in /etc/defaults/pccard.conf To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed Nov 22 10:15:21 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from zorch.sf-bay.org (zorch.sf-bay.org [192.150.103.17]) by hub.freebsd.org (Postfix) with ESMTP id 578DA37B684 for ; Wed, 22 Nov 2000 10:15:13 -0800 (PST) Received: (from uucp@localhost) by zorch.sf-bay.org (8.9.3/8.8.2) with UUCP id KAA97955 for freebsd-mobile@freebsd.org; Wed, 22 Nov 2000 10:15:04 -0800 (PST) Received: (from scott@localhost) by zorba.sf-bay.org (8.11.1/8.8.8) id eAMIDXd35113; Wed, 22 Nov 2000 10:13:33 -0800 (PST) (envelope-from scott) Date: Wed, 22 Nov 2000 10:13:33 -0800 (PST) From: Scott Hazen Mueller Message-Id: <200011221813.eAMIDXd35113@zorba.sf-bay.org> To: freebsd-mobile@freebsd.org Subject: Aviator 2.4 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org So, I'm trying out the newly-committed raylink driver on a pair of Aviator 2.4 (plain, not Pro) cards. The cards are both firmware rev 4. Has anyone gotten these working in a FreeBSD-to-FreeBSD configuration? I have two systems, running a recent (post-commit) -current. The cards are properly recognized by pccardd and the raycontrol program sees the settings and makes reasonable modifications. It actually looks like the two cards just plain aren't seeing each other. The 'BSS Id' values are never the same on the two systems, even those I've set the SSID to the same thing repeatedly. As nearly as I can tell from reading a little about 802.11, the BSS Id is supposed to be the same. Also, both cards always have a 0x01 for 'Current INITED'. Oh, and I've also tried varying the location - one of the systems is sitting on a monitor arm (it's my old laptop) about 6 feet above floor level. The other has been sitting almost directly underneath it, but I've varied the location from nearby to 20 ft away with no luck. The only other major data point I can think of is that I've never tried using these on a Win9x system, so if the Win drivers make some persistent config change I've missed out on that. Help? \scott Firmware version 4 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID sf-wireless Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:d2 Fragmentation threshold 0x7fff Bytes Dwell time 0x04 DWELL_TIME Beacon period 0x01 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0xce PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0xfb1e SCAN_DWELL SCAN_MAX_DWELL 0xc75c SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x4e SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x03 HOP_SEQ HOP_SEQ_LEN 0x4e HOP_SEQ_LEN CW_MAX 0x3f CW_MAX CW_MIN 0x0f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN Current BSS Id 5e:7c:3c:4d:ab:dd Current INITED 0x01 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x04 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID sf-wireless Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID sf-wireless Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 0:11: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from finch-post-12.mail.demon.net (finch-post-12.mail.demon.net [194.217.242.41]) by hub.freebsd.org (Postfix) with ESMTP id 8D15537B4C5 for ; Thu, 23 Nov 2000 00:11:04 -0800 (PST) Received: from myrddin.demon.co.uk ([158.152.54.180] helo=ppe.happygiraffe.net) by finch-post-12.mail.demon.net with esmtp (Exim 2.12 #1) id 13yrT7-000NkH-0C; Thu, 23 Nov 2000 08:10:58 +0000 Received: by ppe.happygiraffe.net (Postfix, from userid 1000) id 4D2FE1C3; Thu, 23 Nov 2000 07:51:27 +0000 (GMT) Date: Thu, 23 Nov 2000 07:51:27 +0000 To: Peter Radcliffe Cc: freebsd-mobile@freebsd.org Subject: Re: USB & PCCard together... Message-ID: <20001123075127.A381@ppe.happygiraffe.net> References: <20001121213407.A881@ppe.happygiraffe.net> <20001121163734.E23140@pir.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001121163734.E23140@pir.net>; from pir@pir.net on Tue, Nov 21, 2000 at 04:37:35PM -0500 X-Warning: Incoming message from The Big Giant Head! X-OS: FreeBSD 4.2-BETA i386 X-Uptime: 7:37AM up 2 mins, 4 users, load averages: 0.01, 0.02, 0.00 From: dom@happygiraffe.net (Dominic Mitchell) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, Nov 21, 2000 at 04:37:35PM -0500, Peter Radcliffe wrote: > Dominic Mitchell probably said: > > So, I switched it off in the BIOS, rebooted and the USB ports worked > > fine. But then, when I inserted a PC-Card (I tried several different > > ones), they all came up as "(null)"("(null)"), instead of the proper > > identifiers. > > Change the IRQ and/or memory addresses the pcmcia controller is using. That fixed it. It turned out pcic0 was in polling mode, which broke. Attaching the right irq to it worked fine. I'm kinda surprised that polling mode broke so badly though. I would have thought it would have been the safer option... -Dom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 6:44:14 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.networkone.net (mail.networkone.net [209.144.112.246]) by hub.freebsd.org (Postfix) with SMTP id 16B3937B4E5 for ; Thu, 23 Nov 2000 06:44:11 -0800 (PST) Received: (qmail 25855 invoked from network); 23 Nov 2000 14:44:09 -0000 Received: from adsl-116-86.ln.networkone.net (HELO reader.ptw.com) (209.144.116.86) by mail.networkone.net with SMTP; 23 Nov 2000 14:44:09 -0000 Received: (from reader@localhost) by reader.ptw.com (8.9.3/8.9.3) id GAA32543; Thu, 23 Nov 2000 06:44:05 -0800 X-Authentication-Warning: reader.ptw.com: reader set sender to reader@newsguy.com using -f To: freebsd-mobile@FreeBSD.ORG Subject: toshiba 40005CDS - getting modem card working From: Harry Putnam Date: 23 Nov 2000 06:29:45 -0800 Message-ID: User-Agent: Gnus/5.0808 (Gnus v5.8.8) Emacs/20.5 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Lines: 83 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Running FreeBSD-4.0 on a Toshiba 4005CDS Modem card 3COM/Noteworthy 56k PCMCIA card `Network Everywhere (lynksys)' Fast Ether. Been running the OS above for some time, but stopped configuring after I got the NIC working (Complements to Sean O'Connell). I use this laptop in conjunction with a desktop machine running Redhat Linux 6.2. That machine is DSL connnected and set to IP-masq the toshiba so haven't really needed to configure ppp until now. I've forgotten most of what I learned while initially configuring the pcmcia card. So am a little lost as to where to start. Reading the ppp sections from handbook I see I must have: pseudo-device tun 1 or similar in my compiled kernel. Grepping the config file I see: grep 'tun' kernel1 <== installed kernel pseudo-device tun # Packet tunnel. #pseudo-device gif 4 # IPv6 and IPv4 tunneling Whereas grepping GENERIC I see pseudo-device tun # Packet tunnel. pseudo-device gif 4 # IPv6 and IPv4 tunneling <=not commented Do I need the gif part inabled? And is the tun line sufficient? On to the modem card(3COM/Noteworthy 56k): Far as I recall this card was never properly recognized: A few items from dmesg: pcic0: at port 0x3e0-0x3e1 on isa0 pcic0: Polling mode pccard0: on pcic0 pccard1: on pcic0 [...] pccard: card inserted, slot 0 pccard: card inserted, slot 1 [...] ed0 at port 0x300-0x31f irq 10 slot 1 on pccard1 ed0: address 00:e0:98:80:08:48, type Linksys (16 bit) (The NIC referred to above works... no problem there) And a few other messages that appear just after the login prompt when booting up: Initial rc.i386 initialization: apm linux Nov 23 06:17:49 satellite pccardd[49]: Card "Toshiba America"("3CXM056-BNW") [3COM/NoteWorthy 56K Modem] [(null)] match ed "Toshiba America" ("3CXM056-BNW") [(null)] [(null)] [...] Local package initialization:Nov 23 06:17:54 satellite pccardd[49]: driver alloc ation failed for Toshiba America(3CXM056-BNW): Device not configured The relevant section from /etc/pccard.conf # 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks) card "Toshiba America" "3CXM056-BNW" config 0x20 "sio" ? insert logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem inserted remove logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem remove I've forgotten what the above means or does. A shove in the right direction to begin figuring out how to establish ppp connection with above mentioned modem card would be a good start. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 8: 5:56 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from jellyfish.codefactory.se (unknown [212.28.197.186]) by hub.freebsd.org (Postfix) with ESMTP id 3E9D237B4CF; Thu, 23 Nov 2000 08:05:55 -0800 (PST) Received: by jellyfish.codefactory.se (Postfix, from userid 1001) id 962B91F; Thu, 23 Nov 2000 17:05:48 +0100 (CET) Date: Thu, 23 Nov 2000 17:05:48 +0100 From: Anders Andersson To: freebsd-mobile@freebsd.org Cc: cg@FreeBSD.org Subject: Sound on a IBM ThinkPad A20p Message-ID: <20001123170548.A85863@jellyfish.codefactory.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! I cannot get sound working on a IBM ThinkPad A20p. dmesg: csa0: mem 0xf0000000-0xf00fffff,0xf0122000-0xf0122fff irq 11 at device 5.0 on pci0 pcm0: on csa0 No errors, just silence. -- Anders Andersson anders.andersson@codefactory.se CodeFactory AB http://www.codefactory.se/ Office: +46 (0)31 711 99 35 Cell: +46 (0)70 587 53 35 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 11:59:49 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from eddings.acpub.duke.edu (eddings.acpub.duke.edu [152.3.233.76]) by hub.freebsd.org (Postfix) with ESMTP id 7AF6A37B479 for ; Thu, 23 Nov 2000 11:59:44 -0800 (PST) Received: from bobzilla.adsl.duke.edu (bobzilla.adsl.duke.edu [152.16.67.15]) by eddings.acpub.duke.edu (8.9.3/8.9.3/Duke-5.0.0) with ESMTP id OAA17787; Thu, 23 Nov 2000 14:59:41 -0500 (EST) Received: (from sto@localhost) by bobzilla.adsl.duke.edu (8.11.1/8.11.1) id eANJxea12897; Thu, 23 Nov 2000 14:59:40 -0500 (EST) (envelope-from sto) Date: Thu, 23 Nov 2000 14:59:40 -0500 From: "Sean O'Connell" To: Harry Putnam Cc: FreeBSD mobile Subject: Re: toshiba 40005CDS - getting modem card working Message-ID: <20001123145940.D12804@stat.Duke.EDU> Reply-To: "Sean O'Connell" Mail-Followup-To: Sean O'Connell , Harry Putnam , FreeBSD mobile References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from reader@newsguy.com on Thu, Nov 23, 2000 at 06:29:45AM -0800 X-Organization: House of Schmutzli X-Kitties: Bitty Maya CJ Keisha Jacob Hopey X-Hound: Bob X-OS-of-Choice: FreeBSD Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Harry Putnam stated: : : Initial rc.i386 initialization: apm linux Nov 23 06:17:49 satellite pccardd[49]: : Card "Toshiba America"("3CXM056-BNW") [3COM/NoteWorthy 56K Modem] [(null)] match : ed "Toshiba America" ("3CXM056-BNW") [(null)] [(null)] : : [...] : Local package initialization:Nov 23 06:17:54 satellite pccardd[49]: driver alloc : ation failed for Toshiba America(3CXM056-BNW): Device not configured : : : The relevant section from /etc/pccard.conf : : # 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks) : card "Toshiba America" "3CXM056-BNW" : config 0x20 "sio" ? : insert logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem inserted : remove logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem remove : : : I've forgotten what the above means or does. : : A shove in the right direction to begin figuring out how to establish : ppp connection with above mentioned modem card would be a good start. Hi Harry- It sounds like an irq problem to me or a conflict with 0x20 config index with one of the onboard com ports. Based on some old emails, I see sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A which means your onboard pcic is running as com1 (sio0). Again, again looking at old email, your pccardc dumpcis for the modem contains: Config index = 0x20(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 100mA Power down supply current: 3.5 x 10mA Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 ==> 0x20 corresponds to COM1 which conflicts with your onboard controller, hence, the driver allocation error. Looking further, Config index = 0x21 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Just change the 0x20 to a 0x21 in /etc/pccard.conf, and as long as you are using a free irq, you should be in business with on COM2 (sio1) grep IO_COM /sys/isa/isareg.h #define IO_COM4 0x2E8 /* COM4 i/o address */ #define IO_COM2 0x2F8 /* COM2 i/o address */ #define IO_COM3 0x3E8 /* COM3 i/o address */ #define IO_COM1 0x3F8 /* COM1 i/o address */ HTH, S -- 1--------01---------01--------01--------01--------01--------01--------0 Sean O'Connell sean@stat.Duke.EDU To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 16:33: 1 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lynx.aba.net.au (lynx.esec.com.au [203.21.84.1]) by hub.freebsd.org (Postfix) with SMTP id 76DCA37B479 for ; Thu, 23 Nov 2000 16:32:59 -0800 (PST) Received: (qmail 10771 invoked from network); 24 Nov 2000 00:32:51 -0000 Received: from swun.esec.com.au (HELO eSec.com.au) (203.21.85.207) by lynx.esec.com.au with SMTP; 24 Nov 2000 00:32:51 -0000 Message-ID: <3A1DB759.972222BE@eSec.com.au> Date: Fri, 24 Nov 2000 11:33:29 +1100 From: Sam Wun Organization: eSec X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-mobile@freebsd.org, cg@FreeBSD.org Subject: WaveLAN card on Free/Open/NetBSD? References: <20001123170548.A85863@jellyfish.codefactory.se> Content-Type: text/plain; charset=gb2312 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I would like to know that which platform is best for installing wireless server, Free, Open or NetBSD? I heard that the Lucent WaveLAN card is not working very well in the FreeBSD kernel. Sam. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 16:47:52 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ns.live.com (ns.live.com [208.184.148.162]) by hub.freebsd.org (Postfix) with ESMTP id 4F97A37B4C5; Thu, 23 Nov 2000 16:47:51 -0800 (PST) Received: from rsf-laptop.live.com (adsl-63-202-175-180.dsl.snfc21.pacbell.net [63.202.175.180]) by ns.live.com (8.9.3/8.9.3) with ESMTP id QAA03940; Thu, 23 Nov 2000 16:47:45 -0800 (PST) (envelope-from finlayson@live.com) Message-Id: <4.3.1.1.20001123163859.00b605a0@ns.live.com> X-Sender: rsf@ns.live.com X-Mailer: QUALCOMM Windows Eudora Version 4.3.1 Date: Thu, 23 Nov 2000 16:42:20 -0800 To: Sam Wun From: Ross Finlayson Subject: Re: WaveLAN card on Free/Open/NetBSD? Cc: freebsd-mobile@FreeBSD.ORG, cg@FreeBSD.ORG In-Reply-To: <3A1DB759.972222BE@eSec.com.au> References: <20001123170548.A85863@jellyfish.codefactory.se> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 04:33 PM 11/23/00, Sam Wun wrote: >I heard that the Lucent WaveLAN card is not working very well in the >FreeBSD kernel. You heard incorrectly. Lucent WaveLAN (now called "Orinoco") works just fine with BSD. What *doesn't* work with FreeBSD (yet) is Lucent's PCI adaptor for their WaveLAN/Orinoco cards. But if you have a PCMCIA slot (or an ISA slot), you should have no problems at all. Ross. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 16:52:30 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.networkone.net (mail.networkone.net [209.144.112.246]) by hub.freebsd.org (Postfix) with SMTP id 20E5937B4CF for ; Thu, 23 Nov 2000 16:52:28 -0800 (PST) Received: (qmail 27165 invoked from network); 24 Nov 2000 00:52:26 -0000 Received: from adsl-116-86.ln.networkone.net (HELO reader.ptw.com) (209.144.116.86) by mail.networkone.net with SMTP; 24 Nov 2000 00:52:26 -0000 Received: (from reader@localhost) by reader.ptw.com (8.9.3/8.9.3) id QAA03837; Thu, 23 Nov 2000 16:52:23 -0800 X-Authentication-Warning: reader.ptw.com: reader set sender to reader@newsguy.com using -f To: "Sean O'Connell" Cc: FreeBSD mobile Subject: Re: toshiba 40005CDS - getting modem card working References: <20001123145940.D12804@stat.Duke.EDU> From: Harry Putnam In-Reply-To: "Sean O'Connell"'s message of "Thu, 23 Nov 2000 14:59:40 -0500" Date: 23 Nov 2000 16:50:39 -0800 Message-ID: User-Agent: Gnus/5.0808 (Gnus v5.8.8) Emacs/20.5 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Lines: 12 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Sean O'Connell" writes: > Harry Putnam stated: > : Initial rc.i386 initialization: apm linux Nov 23 06:17:49 satellite > :pccardd[49]: Card "Toshiba America"("3CXM056-BNW") [3COM/NoteWorthy > :56K Modem] [(null)] match ed "Toshiba America" ("3CXM056-BNW") > :[(null)] [(null)] > : Jesus Sean, How did you find that stuff so quick? I'm studying your response and experimenting now. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 16:55:31 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lynx.aba.net.au (lynx.esec.com.au [203.21.84.1]) by hub.freebsd.org (Postfix) with SMTP id 3EC4C37B4D7 for ; Thu, 23 Nov 2000 16:55:27 -0800 (PST) Received: (qmail 21014 invoked from network); 24 Nov 2000 00:55:24 -0000 Received: from swun.esec.com.au (HELO eSec.com.au) (203.21.85.207) by lynx.esec.com.au with SMTP; 24 Nov 2000 00:55:24 -0000 Message-ID: <3A1DBCA2.A8AF4E2D@eSec.com.au> Date: Fri, 24 Nov 2000 11:56:02 +1100 From: Sam Wun Organization: eSec X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Ross Finlayson Cc: freebsd-mobile@FreeBSD.ORG, cg@FreeBSD.ORG Subject: Re: WaveLAN card on Free/Open/NetBSD? References: <20001123170548.A85863@jellyfish.codefactory.se> <4.3.1.1.20001123163859.00b605a0@ns.live.com> Content-Type: text/plain; charset=gb2312 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Yes, the PCI one is what I want to use with Lucent WaveLAN card. Is the PCMCIA only for laptop? Sam Ross Finlayson wrote: > At 04:33 PM 11/23/00, Sam Wun wrote: > >I heard that the Lucent WaveLAN card is not working very well in the > >FreeBSD kernel. > > You heard incorrectly. Lucent WaveLAN (now called "Orinoco") works just > fine with BSD. > > What *doesn't* work with FreeBSD (yet) is Lucent's PCI adaptor for their > WaveLAN/Orinoco cards. But if you have a PCMCIA slot (or an ISA slot), you > should have no problems at all. > > Ross. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 18: 5:16 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.networkone.net (mail.networkone.net [209.144.112.246]) by hub.freebsd.org (Postfix) with SMTP id CCBB337B479 for ; Thu, 23 Nov 2000 18:05:13 -0800 (PST) Received: (qmail 15974 invoked from network); 24 Nov 2000 02:05:11 -0000 Received: from adsl-116-86.ln.networkone.net (HELO reader.ptw.com) (209.144.116.86) by mail.networkone.net with SMTP; 24 Nov 2000 02:05:11 -0000 Received: (from reader@localhost) by reader.ptw.com (8.9.3/8.9.3) id SAA04049; Thu, 23 Nov 2000 18:04:51 -0800 X-Authentication-Warning: reader.ptw.com: reader set sender to reader@newsguy.com using -f To: "Sean O'Connell" Cc: FreeBSD mobile Subject: Re: toshiba 40005CDS - getting modem card working References: <20001123145940.D12804@stat.Duke.EDU> From: Harry Putnam In-Reply-To: "Sean O'Connell"'s message of "Thu, 23 Nov 2000 14:59:40 -0500" Date: 23 Nov 2000 18:04:21 -0800 Message-ID: User-Agent: Gnus/5.0808 (Gnus v5.8.8) Emacs/20.5 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Lines: 26 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Sean O'Connell" writes: > Harry Putnam stated: > : Initial rc.i386 initialization: apm linux Nov 23 06:17:49 satellite > :pccardd[49]: Card "Toshiba America"("3CXM056-BNW") [3COM/NoteWorthy > :56K Modem] [(null)] match ed "Toshiba America" ("3CXM056-BNW") > :[(null)] [(null)] > : > : [...] Local package initialization:Nov 23 06:17:54 satellite > :pccardd[49]: driver alloc ation failed for Toshiba > :America(3CXM056-BNW): Device not configured Haa... lookee here: With your fix: starting standard daemons: inetd cron sendmail sshd usbd. Initial rc.i386 initialization: apm linuxNov 23 15:48:19 satellite pccardd[49]: Card "Toshiba America"("3CXM056-BNW") [3COM/NoteWorthy 56K Modem] [(null)] match ed "Toshiba America" ("3CXM056-BNW") [(null)] [(null)] . rc.i386 configuring syscons: font8x16 font8x8 blank_time screensaver moused. Local package initialization:sio1 at port 0x2f8-0x2ff irq 3 slot 0 on pccard0 sio1: type 16550A Ohboy... now on to getting ppp setup.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu Nov 23 18:58:20 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from council.csie.ntu.edu.tw (unknown [140.112.30.10]) by hub.freebsd.org (Postfix) with ESMTP id 6170E37B4CF for ; Thu, 23 Nov 2000 18:58:10 -0800 (PST) Received: from localhost (michael@localhost) by council.csie.ntu.edu.tw (8.9.3/8.9.3) with ESMTP id KAA16578 for ; Fri, 24 Nov 2000 10:58:05 +0800 (CST) (envelope-from michael@council.csie.ntu.edu.tw) Date: Fri, 24 Nov 2000 10:58:05 +0800 (CST) From: michael To: freebsd-mobile@freebsd.org Subject: Realtek 8139 CardBus Vresion on FreeBSD? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, all: :) I have a PCMCIA NIC card - Argosy EN-235, which use realtek 8139 chips (I think it's a CardBus version of 8139). I found that in all docs of FreeBSD, realtek 8139 is supported. But when I plug it into the slot, FreeBSD just can't recognize it and it can't be used. On Argosy's website there's a driver package for this card which includes Linux's driver. Reading the source, I found that it's all the same as the driver of PCI version 8139's driver(in Linux's kernel) , except adding some cardbus function (some interface?). So if the card isn't supported, can someone write the FreeBSD driver for it? :P Thanks in advanced for all. Best Regards, Hsin-Mu Tsai Dept. of CSIE National Taiwan University michael@council.csie.ntu.edu.tw To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 4: 7:41 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.dev.itouchnet.net (mx1.dev.itouchnet.net [196.14.181.66]) by hub.freebsd.org (Postfix) with ESMTP id E812037B4C5 for ; Fri, 24 Nov 2000 04:07:35 -0800 (PST) Received: from nobody by mx1.dev.itouchnet.net with scanned_ok (Exim 3.16 #1) id 13zHbz-0003Pb-00 for mobile@freebsd.org; Fri, 24 Nov 2000 14:05:51 +0200 Received: from devco.net ([196.14.181.39] helo=e0-ter-fw1.dev.itouchnet.net) by mx1.dev.itouchnet.net with esmtp (Exim 3.16 #1) id 13zHby-0003PS-00 for mobile@freebsd.org; Fri, 24 Nov 2000 14:05:50 +0200 Received: from dreamfall.prv.dev.itouchnet.net ([192.168.8.34]) by e0-ter-fw1.dev.itouchnet.net with esmtp (Exim 3.15 #1) id 13zHei-000IW4-00 for mobile@freebsd.org; Fri, 24 Nov 2000 14:08:40 +0200 Received: from ljb by dreamfall.prv.dev.itouchnet.net with local (Exim 3.16 #1 (Debian)) id 13zHhD-0000zx-00 for ; Fri, 24 Nov 2000 14:11:15 +0200 Date: Fri, 24 Nov 2000 14:11:15 +0200 From: Leon Breedt To: mobile@freebsd.org Subject: a20m & freebsd success Message-ID: <20001124141114.A3832@dreamfall.prv.dev.itouchnet.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Checked: This message has been scanned for any virusses and unauthorized attachments. X-iScan: Version $Id: iScan,v 1.26 2000/10/08 14:12:55 rip Exp $ Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! I've managed to get FreeBSD going on one of these difficult IBM ThinkPad A20m's. I tried the solution suggested by David Lebel, but my model A20m just doesn't like any form of type 165 partition. So what I did is install FreeBSD, and then just before rebooting, change the type of the FreeBSD partition to 166 (OpenBSD), since I noticed the notebook has no problem with it. I chose to *not* install the FreeBSD boot loader, it probably wouldn't have worked with an OpenBSD type partition. Instead, since I use the GRUB bootloader (which has rudimentary ffs filesystem drivers), I could still point it at the correct /boot/loader to use for booting FreeBSD. And it works! Oh, and you don't need to take the machine in to any vendor to get it fixed if you installed and it won't boot...Pull the drive out (its located on the middle left side of your notebook, then power up the notebook, press F12 when it displays the prompt, and wait for the boot menu to appear. Once its displayed, push the drive back in, wait 10-15 seconds for it to power up, and select CDROM if you want to boot from a rescue cd, from which you can change the partition type. I don't think this will damage the drive, but no guarantees :). I was desperate and alone in a hotel room with no easily accessible 3rd party PCs :) Have fun! Leon. -- System Administrator, Devco : http://www.devco.net GSM : +27-82-789-1245 Office : +27-21-415-2140 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 6: 2:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (Postfix) with ESMTP id 2C00637B479 for ; Fri, 24 Nov 2000 06:02:55 -0800 (PST) Received: from we.lc.ehu.es (josu-pc [158.227.6.124]) by polaris.we.lc.ehu.es (8.11.1/8.11.1) with ESMTP id eAOE2l515463 for ; Fri, 24 Nov 2000 15:02:48 +0100 (MET) Message-ID: <3A1E750B.2936CCE8@we.lc.ehu.es> Date: Fri, 24 Nov 2000 15:02:51 +0100 From: Josu Jugo X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: mobile@freebsd.org Subject: Ati mobility M3 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I have a new Dell inspiron 4000 which carries ATI rage mobility M3 graphics chipset. I can not configure XFree86 (3.3.6). Has somebody try it? beltza To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 8:48:57 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.visgen.com (uu-t1-6.visgen.com [216.94.71.6]) by hub.freebsd.org (Postfix) with ESMTP id BA50937B4E5 for ; Fri, 24 Nov 2000 08:48:51 -0800 (PST) Received: from topheavy.visgen.com (topheavey [192.168.11.102]) by mail.visgen.com (8.9.3/8.9.3) with ESMTP id LAA02272 for ; Fri, 24 Nov 2000 11:48:50 -0500 (EST) Message-Id: <4.3.2.20001124115800.01c90740@pophost> X-Sender: scott@pophost X-Mailer: QUALCOMM Windows Eudora Version 4.3 Date: Fri, 24 Nov 2000 11:58:13 -0500 To: freebsd-mobile@freebsd.org From: Scott Augustus Subject: Recommended ethernet pccard for 4.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Greetings all, Trying desperately to bring up a Xircom CreditCard IIPS up in fbsd 4.2 to no avail. I've got the card being recognized, even see the proper settings in ifconfig via use of rc.conf entries but just can't seem to get it to become active. See below for outputs, let me know if you see something obvious. I'm wondering a couple things: 1) Is there one particular card one might recommend has having the best chance of working? 2) Can anyone recommend a good resource for FAQ's, How To's etc on fbsd and mobile use? TIA, Scott rc.conf: ----------- defaultrouter="192.168.11.2" pccard_enable="YES" pccard_mem="DEFAULT" pccard_ifconfig="inet 192.168.11.99 netmask 255.255.255.0 media 10baseT/UTP" pccard_conf="/etc/pccard.conf" # -- sysinstall generated deltas -- # ifconfig_xe1="inet 192.168.11.99 netmask 255.255.255.0" defaultrouter="192.168.11.2" ifconfig -a: --------------- lp0: flags=8810 mtu 1500 faith0: flags=8000 mtu 1500 gif0: flags=8010 mtu 1280 gif1: flags=8010 mtu 1280 gif2: flags=8010 mtu 1280 gif3: flags=8010 mtu 1280 lo0: flags=8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 xe1: flags=8c43 mtu 1500 inet 192.168.11.99 netmask 0xffffff00 broadcast 192.168.11.255 inet6 fe80::280:c7ff:fe53:83dc%xe1 prefixlen 64 scopeid 0xa ether 00:80:c7:53:83:dc media: 10baseT/UTP supported media: autoselect 10base2/BNC 10baseT/UTP To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 10:53:47 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from barry.mail.mindspring.net (barry.mail.mindspring.net [207.69.200.25]) by hub.freebsd.org (Postfix) with ESMTP id 300B637B479 for ; Fri, 24 Nov 2000 10:53:44 -0800 (PST) Received: from ix.netcom.com (col-oh32-55.ix.netcom.com [207.220.177.55]) by barry.mail.mindspring.net (8.9.3/8.8.5) with ESMTP id NAA23441; Fri, 24 Nov 2000 13:53:36 -0500 (EST) Message-ID: <3A1EB9AD.C012B951@ix.netcom.com> Date: Fri, 24 Nov 2000 13:55:41 -0500 From: Richard Scranton Reply-To: scrantr@ix.netcom.com Organization: Online Computer Library Center, Inc. X-Mailer: Mozilla 4.75 [en] (X11; U; FreeBSD 4.1-RELEASE i386) X-Accept-Language: en-US, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Subject: Sony Vaio Z505JS Configuration Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have a working 4.1R kernel config for the Z505JS Vaio from Sony that I'm willing to share. Point a web browser at: http://home.netcom.com/~scrantr/Z505JS.txt The SuperSlim notebooks make a really slick portable FreeBSD platform. USB is supported for both mouse and floppy diskette, as is sound. The config file includes the necessary incantations for parallel ZIP and PCCard SCSI (Adaptec 1460) to operate a Panasonic portable CD drive. Unsupported are the wretched winmodem and the firewire controller. Suspend/resume works if you apply the 3 patches mentioned in the mailing list archives. As posted, the config file includes Warner's winmodem placeholder driver, which does recognize the device and announce its unsupported status. Comment out that line if you don't feel like applying the patch. The SysV IPC lines are dinked a little to accomodate running Sybase's FreeBSD port for v11.0.3.3, Miscellaneous oddities about this system: This entry in rc.conf gets the GlidePoint "tap" working like a button-1 click. moused_type="auto" moused_port="/dev/psm0" moused_flags="-3 -m1=4" You will want to use SysMouse on this computer so that the external USB mouse with 3 buttons and center wheel works correctly. Alter usbd.conf as below, install imwheel form packages, and add the line "imwheel" to your .xsession or .xinitrc file. device "Mouse" devname "ums[0-9]+" attach "/usr/sbin/moused -p /dev/${DEVNAME} -z 4 -I /var/run/moused.${DEVNAME}.pid" PCCards are more reliable if the memory start is moved to 0xd4000. There is some issue with the size of the video BIOS that is not correctly detected by the stock X server. This is also set in the above linked kernel config file. pccard_enable="YES" pccardd_flags="-z" pccard_mem="0xd4000" pccard_conf="/etc/pccard.conf" Alter the XF86Config file as below to get the X server running. The chipset is not quite recognized, and XFree86 picks the wrong fallback choice. The Chipset and VideoRam entries are the important ones to add. Section "Device" Identifier "neomagic" VendorName "neomagic" BoardName "256xl" VideoRam 4096 Chipset "NM2200" EndSection As always, thanks to all on the FreeBSD team that make my job easier by building an extraordinary tool. -- ________________________________________________________________________ Technology is dominated by those who manage what they do not understand. http://www.netcom.com/~scrantr/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 11:14:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.numachi.com (numachi.numachi.com [198.175.254.2]) by hub.freebsd.org (Postfix) with SMTP id 6595337B4C5 for ; Fri, 24 Nov 2000 11:14:34 -0800 (PST) Received: (qmail 14910 invoked by uid 3001); 24 Nov 2000 19:14:28 -0000 Received: from natto.numachi.com (198.175.254.216) by numachi.numachi.com with SMTP; 24 Nov 2000 19:14:27 -0000 Received: (qmail 94682 invoked by uid 1001); 24 Nov 2000 19:14:27 -0000 Date: Fri, 24 Nov 2000 14:14:27 -0500 From: Brian Reichert To: Richard Scranton Cc: freebsd-mobile@freebsd.org Subject: Re: Sony Vaio Z505JS Configuration Message-ID: <20001124141427.D94121@numachi.com> References: <3A1EB9AD.C012B951@ix.netcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A1EB9AD.C012B951@ix.netcom.com>; from scrantr@ix.netcom.com on Fri, Nov 24, 2000 at 01:55:41PM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 24, 2000 at 01:55:41PM -0500, Richard Scranton wrote: > > I have a working 4.1R kernel config for the Z505JS Vaio from Sony that I'm > willing to share. Point a web browser at: > > http://home.netcom.com/~scrantr/Z505JS.txt I have 4.1.1 with Xfree86 4.0.1 running on a VAIO-C1XS. I'll post kernel config, XF86config, etc, if people care... (woo-hoo! working sound! :) -- Brian 'you Bastard' Reichert 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA Intel architecture: the left-hand path To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 11:43:18 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from pike.osd.bsdi.com (pike.osd.bsdi.com [204.216.28.222]) by hub.freebsd.org (Postfix) with ESMTP id 535E337B4D7 for ; Fri, 24 Nov 2000 11:43:07 -0800 (PST) Received: from foo.osd.bsdi.com (root@foo.osd.bsdi.com [204.216.28.137]) by pike.osd.bsdi.com (8.11.1/8.9.3) with ESMTP id eAOJgxC55281; Fri, 24 Nov 2000 11:42:59 -0800 (PST) (envelope-from jhb@foo.osd.bsdi.com) Received: (from jhb@localhost) by foo.osd.bsdi.com (8.11.1/8.11.0) id eAOJe9P21326; Fri, 24 Nov 2000 11:40:09 -0800 (PST) (envelope-from jhb) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <3A1E750B.2936CCE8@we.lc.ehu.es> Date: Fri, 24 Nov 2000 11:40:08 -0800 (PST) Organization: BSD, Inc. From: John Baldwin To: Josu Jugo Subject: RE: Ati mobility M3 Cc: mobile@FreeBSD.ORG Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 24-Nov-00 Josu Jugo wrote: > Hi, > > I have a new Dell inspiron 4000 which carries ATI rage mobility M3 > graphics chipset. I can not configure XFree86 (3.3.6). Has somebody try it? > > beltza It is a rage128, you may have to either a) build X 3.3.6 from ports which has patches to add in r128 support (instead of installing from sysinstall), or b) build X 4 from the current sources, as the r128 driver is busted in 4.0.1 release. -- John Baldwin -- http://www.FreeBSD.org/~jhb/ PGP Key: http://www.Baldwin.cx/~john/pgpkey.asc "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 11:47:55 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail-2.sjc.telocity.net (mail-2.sjc.telocity.net [216.227.56.42]) by hub.freebsd.org (Postfix) with ESMTP id EB02637B4C5; Fri, 24 Nov 2000 11:47:51 -0800 (PST) Received: from zoso (dsl-216-227-91-85.telocity.com [216.227.91.85]) by mail-2.sjc.telocity.net (8.9.3/8.9.3) with SMTP id LAA07645; Fri, 24 Nov 2000 11:43:30 -0800 (PST) From: "Otter" To: "FreeBSD Questions" , Subject: PCCARD config question Date: Fri, 24 Nov 2000 14:51:12 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I just got a laptop (Toshiba 330CDS) and have a pccard which worked for ftp install, but after the reboot, won't work now. I realize the install automated the enabling of the device, but I need to set it up so it's found at boot or at least so I can manually start the NIC. It's a 3com 3CXFE574BT, found on the install as an "ep" device. I've got the default/generic kernel, so no device support has been removed. At boot time, I can see it tries to ifconfig the device, but there is a message about "device ep does not exist". Shortly before that, I see an error message stating "/dev/card0: device not configured". What am i missing? There are entries for card0-3 in my /dev. I haven't found much in the way of documentation for this, other than searching the mailing list and reading the man page for pccard.conf. Any info would be greatly appreciated. Please Cc: me in the reply as I'm not subscribed to -mobile. TIA. -Otter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 13: 1:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from homero.datascan-site.com (unknown [216.230.142.66]) by hub.freebsd.org (Postfix) with ESMTP id C454237B4CF for ; Fri, 24 Nov 2000 13:01:24 -0800 (PST) Received: from homero.datascan-site.com (localhost.datascan-site.com [127.0.0.1]) by homero.datascan-site.com (8.9.3/8.9.3) with SMTP id OAA86132 for ; Fri, 24 Nov 2000 14:57:42 -0600 (CST) (envelope-from rocket@homero.datascan-site.com) From: Jose Rodrigo Fernandez Menegazzo Received: from 192.168.0.9 (SquirrelMail authenticated user rocket) by mail.datascan-site.com with HTTP; Fri, 24 Nov 2000 14:57:42 -0600 (CST) Message-ID: <1912.192.168.0.9.975099462.squirrel@mail.datascan-site.com> Date: Fri, 24 Nov 2000 14:57:42 -0600 (CST) Subject: RE: Ati mobility M3 To: freebsd-mobile@freebsd.org X-Mailer: SquirrelMail (version 0.5) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > On 24-Nov-00 Josu Jugo wrote: > > Hi, > > > > I have a new Dell inspiron 4000 which carries ATI rage mobility M3 > > graphics chipset. I can not configure XFree86 (3.3.6). Has somebody try it? > > > > beltza > > It is a rage128, you may have to either a) build X 3.3.6 from ports which has > patches to add in r128 support (instead of installing from sysinstall), or b) > build X 4 from the current sources, as the r128 driver is busted in 4.0.1 > release. > > -- Or you can add the option: ChipId 0x5246 On the device configuration on the XF86Config and it shoud work. Rodrigo F. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 13: 8:30 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mailhost01.reflexnet.net (mailhost01.reflexnet.net [64.6.192.82]) by hub.freebsd.org (Postfix) with ESMTP id E3F2637B4C5 for ; Fri, 24 Nov 2000 13:08:28 -0800 (PST) Received: from 149.211.6.64.reflexcom.com ([64.6.211.149]) by mailhost01.reflexnet.net with Microsoft SMTPSVC(5.5.1877.197.19); Fri, 24 Nov 2000 13:06:57 -0800 Received: (from cjc@localhost) by 149.211.6.64.reflexcom.com (8.11.0/8.11.0) id eAOL8LP76819; Fri, 24 Nov 2000 13:08:21 -0800 (PST) (envelope-from cjc) Date: Fri, 24 Nov 2000 13:08:21 -0800 From: "Crist J . Clark" To: Scott Augustus Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Recommended ethernet pccard for 4.2 Message-ID: <20001124130821.Q12190@149.211.6.64.reflexcom.com> Reply-To: cjclark@alum.mit.edu References: <4.3.2.20001124115800.01c90740@pophost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <4.3.2.20001124115800.01c90740@pophost>; from scott@visgen.com on Fri, Nov 24, 2000 at 11:58:13AM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 24, 2000 at 11:58:13AM -0500, Scott Augustus wrote: > Greetings all, > Trying desperately to bring up a Xircom CreditCard IIPS up in fbsd 4.2 to > no avail. I've got the card being recognized, even see the proper settings > in ifconfig via use of rc.conf entries but just can't seem to get it to > become active. See below for outputs, let me know if you see something obvious. I have one of those, and I never have gotten it to work. Same thing happens, it comes up and it looks like everything is OK (the pccardd messages look fine as does ifconfig(8) output), but it just doesn't work. Warner actually got one to wok with this fall, but last I knew, his did not work either. > I'm wondering a couple things: > > 1) Is there one particular card one might recommend has having the best > chance of working? I have used several 3Com5X9 cards in different PCs and they have worked fine. > 2) Can anyone recommend a good resource for FAQ's, How To's etc on fbsd and > mobile use? Dunno. There's the PAO pages. -- Crist J. Clark cjclark@alum.mit.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 13: 9:26 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail-1.sjc (mail-1.sjc.telocity.net [216.227.56.41]) by hub.freebsd.org (Postfix) with ESMTP id 876AC37B4CF; Fri, 24 Nov 2000 13:09:20 -0800 (PST) Received: from zoso (dsl-216-227-91-85.telocity.com [216.227.91.85]) by mail-1.sjc (8.9.3/8.9.3) with SMTP id NAA06296; Fri, 24 Nov 2000 13:07:33 -0800 (PST) From: "Otter" To: "Ben Lutgens" , , Subject: RE: PCCARD config question Date: Fri, 24 Nov 2000 16:12:58 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 In-Reply-To: <20001124140919.B6405@socrates.sistina.com> Importance: Normal Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Thanks Ben! After installing 4.2-R (I should have stated this earlier) I had all this with one exception: where you show the line with device pcic1. By default, mine was the same as yours, but with a "disable" at the end of the line. Removing that word and rebuilding the kernel, and of course rebooting, made everything come together. Thanks for pointing that out! Just one more question: Is there a way to make rc pause for 10 seconds or so after calling rc.pccard before setting up the network? -Otter }-----Original Message----- }From: Ben Lutgens [mailto:blutgens@sistina.com] }Sent: Friday, November 24, 2000 3:09 PM }To: Otter }Subject: Re: PCCARD config question } } }On Fri, Nov 24, 2000 at 02:51:12PM -0500, Otter wrote: }>I just got a laptop (Toshiba 330CDS) and have a pccard which worked }>for ftp install, but after the reboot, won't work now. I realize the }>install automated the enabling of the device, but I need to }set it up }>so it's found at boot or at least so I can manually start the NIC. }>It's a 3com 3CXFE574BT, found on the install as an "ep" device. I've }>got the default/generic kernel, so no device support has }been removed. }>At boot time, I can see it tries to ifconfig the device, }but there is }>a message about "device ep does not exist". Shortly before }that, I see }>an error message stating "/dev/card0: device not }configured". What am } }Sounds to me like you need to recompile your kernel. Make }sure the lines }for the card devices are in there. I run 4.2-STABLE and have }device card }device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 }device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 } }>i missing? There are entries for card0-3 in my /dev. I haven't found }>much in the way of documentation for this, other than searching the }>mailing list and reading the man page for pccard.conf. Any }info would }>be greatly appreciated. Please Cc: me in the reply as I'm not }>subscribed to -mobile. TIA. }>-Otter }> }> }> }> }>To Unsubscribe: send mail to majordomo@FreeBSD.org }>with "unsubscribe freebsd-mobile" in the body of the message } To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 14:47: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f160.law9.hotmail.com [64.4.9.160]) by hub.freebsd.org (Postfix) with ESMTP id B5B0737B4CF for ; Fri, 24 Nov 2000 14:47:04 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 24 Nov 2000 14:47:04 -0800 Received: from 63.195.114.87 by lw9fd.law9.hotmail.msn.com with HTTP; Fri, 24 Nov 2000 22:47:04 GMT X-Originating-IP: [63.195.114.87] From: "Greg Smith" To: scott@visgen.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Recommended ethernet pccard for 4.2 Date: Fri, 24 Nov 2000 22:47:04 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 24 Nov 2000 22:47:04.0573 (UTC) FILETIME=[775FD2D0:01C05668] Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 24, 2000 at 11:58:13AM -0500, Scott Augustus wrote: >1) Is there one particular card one might recommend has having the >best chance of working? I have had good luck with a 3Com 3C589D and also with a Linksys EC2T. The latter is pretty cheap, and has the additional advantage that I can have an ep0 and an ed0 at the same time in my gateway machine. Greg Smith _____________________________________________________________________________________ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri Nov 24 16: 9:45 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mta06-svc.ntlworld.com (mta06-svc.ntlworld.com [62.253.162.46]) by hub.freebsd.org (Postfix) with ESMTP id 8421737B4CF for ; Fri, 24 Nov 2000 16:09:38 -0800 (PST) Received: from ragnet.demon.co.uk ([62.253.135.85]) by mta06-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20001125000935.PCAG5359.mta06-svc.ntlworld.com@ragnet.demon.co.uk>; Sat, 25 Nov 2000 00:09:35 +0000 Received: from dmlb by ragnet.demon.co.uk with local (Exim 3.03 #1) id 13zSiF-000BX2-00; Fri, 24 Nov 2000 23:57:03 +0000 Content-Length: 9545 Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="_=XFMail.1.3.p0.FreeBSD:001124235703:41407=_" In-Reply-To: <200011221813.eAMIDXd35113@zorba.sf-bay.org> Date: Fri, 24 Nov 2000 23:57:03 -0000 (GMT) From: Duncan Barclay To: Scott Hazen Mueller Subject: RE: Aviator 2.4 Cc: freebsd-mobile@freebsd.org Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format --_=XFMail.1.3.p0.FreeBSD:001124235703:41407=_ Content-Type: text/plain; charset=us-ascii Hi On 22-Nov-00 Scott Hazen Mueller wrote: > So, I'm trying out the newly-committed raylink driver on a pair of Aviator 2.4 > (plain, not Pro) cards. The cards are both firmware rev 4. Has anyone gotten > these working in a FreeBSD-to-FreeBSD configuration? Certainly, this is how I tested on 3.x, 4.1 and -current! Attached are raycontrol files from my machines at home. I note that your raycontrol dump shows that the hopset is 0x03 and not 0x1d. Did you change it? I'm not sure that the hopset code selection actually works well on rev4 cards (conflicting information in docs etc.) > I have two systems, running a recent (post-commit) -current. The > cards are properly recognized by pccardd and the raycontrol program > sees the settings and makes reasonable modifications. It actually > looks like the two cards just plain aren't seeing each other. The > 'BSS Id' values are never the same on the two systems, even those > I've set the SSID to the same thing repeatedly. As nearly as I can > tell from reading a little about 802.11, the BSS Id is supposed to > be the same. Also, both cards always have a 0x01 for 'Current > INITED'. Hmm, this means that the cards aren't seeing each other at all. The seperated BSSIDs and INITED flag, mean that the cards have set up seperate networks. Things to try - plug one card in and wait a couple of minutes before plugging in the next check the hopsets I don't think that the W98 will change anything on the cards in a permanant fashion. > Oh, and I've also tried varying the location - one of the systems is > sitting on a monitor arm (it's my old laptop) about 6 feet above > floor level. The other has been sitting almost directly underneath > it, but I've varied the location from nearby to 20 ft away with no > luck. Try moving them away from the monitor - the scan coils may be interfering with the radio. Duncan --- ________________________________________________________________________ Duncan Barclay | God smiles upon the little children, dmlb@ragnet.demon.co.uk | the alcoholics, and the permanently stoned. ________________________________________________________________________ --_=XFMail.1.3.p0.FreeBSD:001124235703:41407=_ Content-Disposition: attachment; filename="computer.txt" Content-Transfer-Encoding: 7bit Content-Description: computer.txt Content-Type: text/plain; charset=us-ascii; name=computer.txt; SizeOnDisk=3340 Firmware version 4 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID NETWORK_NAME Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:58:94 Fragmentation threshold 0x7fff Bytes Dwell time 0x04 DWELL_TIME Beacon period 0x00 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0xce PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0xfb1e SCAN_DWELL SCAN_MAX_DWELL 0xc75c SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x4e SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x1d HOP_SEQ HOP_SEQ_LEN 0x4e HOP_SEQ_LEN CW_MAX 0x3f CW_MAX CW_MIN 0x0f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN Current BSS Id f2:00:56:05:2b:bf Current INITED 0x00 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x04 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID NETWORK_NAME Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID NETWORK_NAME Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS --_=XFMail.1.3.p0.FreeBSD:001124235703:41407=_ Content-Disposition: attachment; filename="wanderer.txt" Content-Transfer-Encoding: 7bit Content-Description: wanderer.txt Content-Type: text/plain; charset=us-ascii; name=wanderer.txt; SizeOnDisk=3340 Firmware version 4 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID NETWORK_NAME Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:88:c5:03 Fragmentation threshold 0x7fff Bytes Dwell time 0x04 DWELL_TIME Beacon period 0x00 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0xce PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0xfb1e SCAN_DWELL SCAN_MAX_DWELL 0xc75c SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x4e SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x1d HOP_SEQ HOP_SEQ_LEN 0x4e HOP_SEQ_LEN CW_MAX 0x3f CW_MAX CW_MIN 0x0f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN Current BSS Id f2:00:56:05:2b:bf Current INITED 0x00 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x04 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID NETWORK_NAME Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID NETWORK_NAME Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS --_=XFMail.1.3.p0.FreeBSD:001124235703:41407=_-- End of MIME message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 4:38:13 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from peorth.iteration.net (peorth.iteration.net [208.190.180.178]) by hub.freebsd.org (Postfix) with ESMTP id 2CDD637B4C5 for ; Sat, 25 Nov 2000 04:38:11 -0800 (PST) Received: by peorth.iteration.net (Postfix, from userid 1001) id 25FE757311; Sat, 25 Nov 2000 06:38:47 -0600 (CST) Date: Sat, 25 Nov 2000 06:38:47 -0600 From: "Michael C . Wu" To: Brian Reichert Cc: Richard Scranton , freebsd-mobile@freebsd.org Subject: Re: Sony Vaio Z505JS Configuration Message-ID: <20001125063846.A95906@peorth.iteration.net> Reply-To: "Michael C . Wu" Mail-Followup-To: "Michael C . Wu" , Brian Reichert , Richard Scranton , freebsd-mobile@freebsd.org References: <3A1EB9AD.C012B951@ix.netcom.com> <20001124141427.D94121@numachi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001124141427.D94121@numachi.com>; from reichert@numachi.com on Fri, Nov 24, 2000 at 02:14:27PM -0500 X-PGP-Fingerprint: 5025 F691 F943 8128 48A8 5025 77CE 29C5 8FA1 2E20 X-PGP-Key-ID: 0x8FA12E20 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Nov 24, 2000 at 02:14:27PM -0500, Brian Reichert scribbled: | On Fri, Nov 24, 2000 at 01:55:41PM -0500, Richard Scranton wrote: | > | > I have a working 4.1R kernel config for the Z505JS Vaio from Sony that I'm | > willing to share. Point a web browser at: | > | > http://home.netcom.com/~scrantr/Z505JS.txt | | I have 4.1.1 with Xfree86 4.0.1 running on a VAIO-C1XS. I'll post | kernel config, XF86config, etc, if people care... | | (woo-hoo! working sound! :) There is a website that collects such configurations, I am not at home and hence cannot fetch my bookmakrs. Please search google or the archives for the url -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 7:10:13 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.visgen.com (uu-t1-6.visgen.com [216.94.71.6]) by hub.freebsd.org (Postfix) with ESMTP id C45E437B479 for ; Sat, 25 Nov 2000 07:10:11 -0800 (PST) Received: from topheavy.visgen.com (topheavey [192.168.11.102]) by mail.visgen.com (8.9.3/8.9.3) with ESMTP id KAA22445; Sat, 25 Nov 2000 10:10:01 -0500 (EST) Message-Id: <4.3.2.20001125101528.00c75b90@pophost> X-Sender: scott@pophost X-Mailer: QUALCOMM Windows Eudora Version 4.3 Date: Sat, 25 Nov 2000 10:19:34 -0500 To: "Greg Smith" From: Scott Augustus Subject: Re: Recommended ethernet pccard for 4.2 Cc: freebsd-mobile@FreeBSD.ORG In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 10:47 PM 11/24/00 +0000, Greg Smith wrote: >I have had good luck with a 3Com 3C589D and also with a Linksys EC2T. I recall reading a few rumblings somewhere that the 3c589d works but there are numerous incidents with substantial packet loss. Interestingly, a co-worker in Atlanta complained of the same thing to me. Anyone experience that? 3c589d seems like a good choice but I'd hate to drop the money on one to find it doesn't work, or at least not well ;-) Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 8:35: 6 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f159.law9.hotmail.com [64.4.9.159]) by hub.freebsd.org (Postfix) with ESMTP id E58A137B4CF for ; Sat, 25 Nov 2000 08:35:03 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 25 Nov 2000 08:35:03 -0800 Received: from 63.195.114.87 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 25 Nov 2000 16:35:03 GMT X-Originating-IP: [63.195.114.87] From: "Greg Smith" To: freebsd-mobile@freebsd.org Subject: Re: Laptop Configurations [was Sony Vaio Z505JS Configuration] Date: Sat, 25 Nov 2000 16:35:03 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Nov 2000 16:35:03.0648 (UTC) FILETIME=[A97AB600:01C056FD] Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >There is a website that collects such configurations, I am not at home >and hence cannot fetch my bookmakrs. Please search google or the >archives for the url Is this what you were referencing? "Laptop Compatibility for FreeBSD" : http://www.cse.ucsc.edu/~dkulp/fbsd/laptop.html Greg Smith _____________________________________________________________________________________ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 8:56:53 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f206.law9.hotmail.com [64.4.9.206]) by hub.freebsd.org (Postfix) with ESMTP id 1D95037B479 for ; Sat, 25 Nov 2000 08:56:52 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 25 Nov 2000 08:56:51 -0800 Received: from 63.195.114.87 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 25 Nov 2000 16:56:51 GMT X-Originating-IP: [63.195.114.87] From: "Greg Smith" To: scott@visgen.com Cc: freebsd-mobile@freebsd.org Subject: Re: Recommended ethernet pccard for 4.2 Date: Sat, 25 Nov 2000 16:56:51 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Nov 2000 16:56:51.0837 (UTC) FILETIME=[B53882D0:01C05700] Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >>I have had good luck with a 3Com 3C589D and also with a Linksys EC2T. > >I recall reading a few rumblings somewhere that the 3c589d works but there >are numerous incidents with substantial packet loss. Interestingly, a >co-worker in Atlanta complained of the same thing to >me. Anyone experience that? My gateway machine is used as a packet filter and that's about it. I'm not sure I would recognize a packet loss if it occured but this is the output of my daily maintenance job: Network interface status: Name Mtu ... Ipkts Ierrs Opkts Oerrs Coll lo0 16384 ... 113 0 113 0 0 lo0 16384 ... 113 0 113 0 0 ed0 1500 ... 948651 548 820707 6 65 ed0 1500 ... 948651 548 820707 6 65 ep0 1500 ... 848724 0 954511 1 0 ep0 1500 ... 848724 0 954511 1 0 [ep0=3Com 3C589D ed0=Linksys EC2T] The errors on the EC2T are "invalid packet length" and are apparently experienced by many others judging by the archives. I haven't noticed any effect, and the archives said not to worry about. I assume the magic of ethernet will take care of it. Any opposing opinions? Greg Smith _____________________________________________________________________________________ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 10: 8:40 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from council.csie.ntu.edu.tw (council.csie.ntu.edu.tw [140.112.30.10]) by hub.freebsd.org (Postfix) with ESMTP id 794DE37B479 for ; Sat, 25 Nov 2000 10:08:37 -0800 (PST) Received: from localhost (michael@localhost) by council.csie.ntu.edu.tw (8.9.3/8.9.3) with ESMTP id CAA22652 for ; Sun, 26 Nov 2000 02:08:34 +0800 (CST) (envelope-from michael@council.csie.ntu.edu.tw) Date: Sun, 26 Nov 2000 02:08:34 +0800 (CST) From: michael To: freebsd-mobile@freebsd.org Subject: About D-Link DFE-650. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! all:) After trying so many times to use Realtek Cardbus PC Network CARD but fails, (when I add in the cardbus support in the kernel, it panics)I decide to buy a D-Link DFE-650 card, which is included in pccard.conf of 5.0-current. But when I try to use the new card on my notebook, I have a "ed1: device timeout" error every time I want to do some operation on the card(ex. setting IP). My card is stated to be "Rev D1", which is not supported by Japanese FreeBSD group's PAO package. (But other DFE-650s can work!! why????) Does anyone have any ideas about why my card just can't works? Please help me^__^. I bought this card "only for using net in FreeBSD on my notebook".(Because I already have another PCMCIA NIC which can work in Linux and Windows - Realtek 8139 CardBus). Thanks in advanced. Best Regards, Hsin-Mu Tsai Dept. of CSIE National Taiwan University E-Mail: michael@council.csie.ntu.edu.tw To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 10:58:59 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mail-4.sjc.telocity.net (mail-4.sjc.telocity.net [216.227.56.44]) by hub.freebsd.org (Postfix) with ESMTP id 2E2E437B4CF; Sat, 25 Nov 2000 10:58:57 -0800 (PST) Received: from zoso (dsl-216-227-91-85.telocity.com [216.227.91.85]) by mail-4.sjc.telocity.net (8.9.3/8.9.3) with SMTP id KAA10672; Sat, 25 Nov 2000 10:54:13 -0800 (PST) From: "Otter" To: "FreeBSD Questions" , Subject: modifying the /etc/rc script Date: Sat, 25 Nov 2000 14:01:33 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Due to some problems with intermittent pccard identification delays, I need to add a pause in the rc script. 5 seconds should be sufficient, just not sure how to add it. I found WHERE, just not WHAT. It needs to go after it calls rc.pccard, and before it runs rc.network. Thanks in advance. -Otter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 12:46:37 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mailhost01.reflexnet.net (mailhost01.reflexnet.net [64.6.192.82]) by hub.freebsd.org (Postfix) with ESMTP id A092437B4D7; Sat, 25 Nov 2000 12:46:33 -0800 (PST) Received: from 149.211.6.64.reflexcom.com ([64.6.211.149]) by mailhost01.reflexnet.net with Microsoft SMTPSVC(5.5.1877.197.19); Sat, 25 Nov 2000 12:45:01 -0800 Received: (from cjc@localhost) by 149.211.6.64.reflexcom.com (8.11.0/8.11.0) id eAPKkVj95454; Sat, 25 Nov 2000 12:46:31 -0800 (PST) (envelope-from cjc) Date: Sat, 25 Nov 2000 12:46:30 -0800 From: "Crist J . Clark" To: Otter Cc: FreeBSD Questions , mobile@FreeBSD.ORG Subject: Re: modifying the /etc/rc script Message-ID: <20001125124630.W12190@149.211.6.64.reflexcom.com> Reply-To: cjclark@alum.mit.edu References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from otterr@telocity.com on Sat, Nov 25, 2000 at 02:01:33PM -0500 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, Nov 25, 2000 at 02:01:33PM -0500, Otter wrote: > Due to some problems with intermittent pccard identification delays, I > need to add a pause in the rc script. 5 seconds should be sufficient, > just not sure how to add it. I found WHERE, just not WHAT. It needs to > go after it calls rc.pccard, and before it runs rc.network. Thanks in > advance. Personally, I think it would make more sense to put the delay in rc.pccard, --- /etc/rc.pccard Sun Aug 6 22:55:48 2000 +++ rc.pccard Sat Nov 25 12:44:33 2000 @@ -23,5 +23,8 @@ echo -n "Enable PC-card." pccardd ${pccardd_flags} 2>&1 > /var/log/pccardd.debug + + # Pause for PCCard to initialize + sleep 5 ;; esac -- Crist J. Clark cjclark@alum.mit.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 14:21:11 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from zmail6.easynet.fr (email.easynet.fr [195.114.64.207]) by hub.freebsd.org (Postfix) with SMTP id 8DE7337B4C5 for ; Sat, 25 Nov 2000 14:21:09 -0800 (PST) Received: (qmail 24686 invoked from network); 25 Nov 2000 22:21:08 -0000 Received: from mailgate3.easynet.fr (192.168.1.4) by mailserver.easynet.fr with QMQP; 25 Nov 2000 22:21:08 -0000 Received: from adsl-92-1-172.pops.easynet.fr (HELO vobiscum.styx.org) (212.11.34.172) by mrelay3.easynet.fr with SMTP; 25 Nov 2000 22:21:07 -0000 Received: (from marc@localhost) by vobiscum.styx.org (8.11.1/8.9.3/ - 6/08/98) id eAPMSLh03628; Sat, 25 Nov 2000 23:28:21 +0100 (CET) (envelope-from marc) Date: Sat, 25 Nov 2000 23:28:21 +0100 From: Marc Fonvieille To: michael Cc: freebsd-mobile@freebsd.org Subject: Re: About D-Link DFE-650. Message-ID: <20001125232821.A3355@vobiscum.styx.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from michael@council.csie.ntu.edu.tw on Sun, Nov 26, 2000 at 02:08:34AM +0800 X-Useless-Header: Black Metal inc. X-Operating-System: FreeBSD 4.2-STABLE Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Nov 26, 2000 at 02:08:34AM +0800, michael wrote: > Hi! all:) > > After trying so many times to use Realtek Cardbus > PC Network CARD but fails, (when I add in the cardbus > support in the kernel, it panics)I decide to buy a D-Link > DFE-650 card, which is included in pccard.conf of > 5.0-current. But when I try to use the new card on my > notebook, I have a "ed1: device timeout" error every time > I want to do some operation on the card(ex. setting IP). > My card is stated to be "Rev D1", which is not > supported by Japanese FreeBSD group's PAO package. > (But other DFE-650s can work!! why????) > Does anyone have any ideas about why my card just > can't works? > Try to use fa_select http://webperso.easynet.fr/fonvi/fa_select.c read http://www.freebsddiary.org/last-netgear.html for the instructions Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 15:46:10 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by hub.freebsd.org (Postfix) with ESMTP id 31B8437B4C5 for ; Sat, 25 Nov 2000 15:46:09 -0800 (PST) Received: from pir by moek.pir.net with local (Exim) id 13zp18-0001UK-00 for mobile@FreeBSD.ORG; Sat, 25 Nov 2000 18:46:02 -0500 Date: Sat, 25 Nov 2000 18:46:02 -0500 From: Peter Radcliffe To: mobile@FreeBSD.ORG Subject: Re: modifying the /etc/rc script Message-ID: <20001125184602.E27322@pir.net> Mail-Followup-To: mobile@FreeBSD.ORG References: <20001125124630.W12190@149.211.6.64.reflexcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001125124630.W12190@149.211.6.64.reflexcom.com>; from cjclark@reflexnet.net on Sat, Nov 25, 2000 at 12:46:30PM -0800 X-fish: < Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Crist J . Clark" probably said: > On Sat, Nov 25, 2000 at 02:01:33PM -0500, Otter wrote: > > Due to some problems with intermittent pccard identification delays, I > > need to add a pause in the rc script. 5 seconds should be sufficient, > > just not sure how to add it. I found WHERE, just not WHAT. It needs to > > go after it calls rc.pccard, and before it runs rc.network. Thanks in > > advance. > > Personally, I think it would make more sense to put the delay in > rc.pccard, Why not just add -z to $pccardd_flags ? P. -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 22: 0:36 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from ultra2.quiknet.com (ultra2.quiknet.com [207.183.249.4]) by hub.freebsd.org (Postfix) with SMTP id 756EA37B4CF for ; Sat, 25 Nov 2000 22:00:34 -0800 (PST) Received: (qmail 10182 invoked from network); 26 Nov 2000 06:00:21 -0000 Received: from sysdev.quiknet.com (HELO sysdev2) (207.183.226.30) by ultra2.quiknet.com with SMTP; 26 Nov 2000 06:00:21 -0000 Message-Id: <3.0.6.32.20001125220251.0124ce30@pop.quiknet.com> X-Sender: bney@pop.quiknet.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Sat, 25 Nov 2000 22:02:51 -0800 To: Peter Radcliffe From: Bob Ney Subject: Re: modifying the /etc/rc script Cc: freebsd-mobile@freebsd.org In-Reply-To: <20001125184602.E27322@pir.net> References: <20001125124630.W12190@149.211.6.64.reflexcom.com> <20001125124630.W12190@149.211.6.64.reflexcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I put my card specific parameters like ifconfigs and default routes in the pccard insert block of pccard.conf. It works real well there. At 06:46 PM 11/25/00 -0500, you wrote: >"Crist J . Clark" probably said: >> On Sat, Nov 25, 2000 at 02:01:33PM -0500, Otter wrote: >> > Due to some problems with intermittent pccard identification delays, I >> > need to add a pause in the rc script. 5 seconds should be sufficient, >> > just not sure how to add it. I found WHERE, just not WHAT. It needs to >> > go after it calls rc.pccard, and before it runs rc.network. Thanks in >> > advance. >> >> Personally, I think it would make more sense to put the delay in >> rc.pccard, > >Why not just add -z to $pccardd_flags ? > >P. > >-- >pir pir@pir.net pir@net.tufts.edu > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-mobile" in the body of the message > Bob Ney Quiknet Inc. Director Operations (916) 782-9700 bney@quiknet.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat Nov 25 22:50:42 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from zorch.sf-bay.org (zorch.sf-bay.org [192.150.103.17]) by hub.freebsd.org (Postfix) with ESMTP id 1945037B4CF for ; Sat, 25 Nov 2000 22:50:23 -0800 (PST) Received: (from uucp@localhost) by zorch.sf-bay.org (8.11.1/8.8.2) with UUCP id eAQ6j4j30922; Sat, 25 Nov 2000 22:45:04 -0800 (PST) Received: (from scott@localhost) by zorba.sf-bay.org (8.11.1/8.8.8) id eAQ6gu602080 for dmlb@ragnet.demon.co.uk; Sat, 25 Nov 2000 22:42:56 -0800 (PST) (envelope-from scott) Date: Sat, 25 Nov 2000 22:42:56 -0800 (PST) From: Scott Hazen Mueller Message-Id: <200011260642.eAQ6gu602080@zorba.sf-bay.org> Subject: Re: Aviator 2.4 To: dmlb@ragnet.demon.co.uk, freebsd-mobile@freebsd.org X-Envelope-To: dmlb@ragnet.demon.co.uk Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Certainly, this is how I tested on 3.x, 4.1 and -current! I suspected as much. >I note that your raycontrol dump shows that the hopset is 0x03 and not 0x1d. >Did you change it? I'm not sure that the hopset code selection actually works >well on rev4 cards (conflicting information in docs etc.) Is the hopset 'HOP_SEQ'? It seems to change itself in between power-up and configure, see below. I did observe some odd behavior when issuing the command 'raycontrol -i ray0 -f 1' repeatedly - the HOP_SEQ value seemed to go through random bytes ranging from 0x02 to 0x4-something. >Hmm, this means that the cards aren't seeing each other at all. The seperated >BSSIDs and INITED flag, mean that the cards have set up seperate networks. OK, that confirms what I was thinking. >Things to try - > plug one card in and wait a couple of minutes before plugging in the next Tried that, to no avail. > check the hopsets I've issued the -f 1 command against both cards. As I've noted, HOP_SEQ is all over the map, don't know if that's good or bad. >I don't think that the W98 will change anything on the cards in a permanant >fashion. I may try it as a last resort... >Try moving them away from the monitor - the scan coils may be interfering >with the radio. Tried that as well as I can, given the available space in my office. The 'base' station is about 4 feet above the nearest monitor. I did my last set of tests with the remote about 5 feet away from the nearest monitor. Of course, if the radios are sensitive to noise within these ranges, I can hardly use them anyway... :-( Other info... www.webgear.com is now offering a flash upgrade from plain 2.4 (& rev 4) to 2.4 Pro (& rev 5) firmware. Visit the site and find the Win2K upgrade - it includes most of a flash floppy in the kit, just add one bootable DOS floppy and run. I've applied this upgrade to my cards, no additional luck. But, as I understand it, rev 5 is worth having anyway. I ran a still more careful test tonight. I started with both systems (zork and zorba) powered down, with the ray cards inserted. I powered zork (the base station) up first. The raycontrol output, before issuing any networking commands, was (zork) Firmware version 5 Network type 0x01 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID ESSID1 Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:f8 Fragmentation threshold 0x7fff Bytes Dwell time 0x0080 DWELL_TIME Beacon period 0x0100 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x1f MAX_RETRY ACK_TIMO 0x86 ACK_TIMO SIFS 0x1c SIFS DIFS 0x82 DIFS PIFS 0x4e PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0x04e2 SCAN_DWELL SCAN_MAX_DWELL 0x38a4 SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x32 SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x02 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x0b HOP_SEQ HOP_SEQ_LEN 0x55 HOP_SEQ_LEN CW_MAX 0x003f CW_MAX CW_MIN 0x000f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN ALLOW_PROBE_RESP 0x00 ALLOW_PROBE_RESP PRIVACY_MUST_START 0x00 PRIVACY_MUST_START PRIVACY_CAN_JOIN 0x00 PRIVACY_CAN_JOIN BASIC_RATE_SET 0x02 BASIC_RATE_SET Current BSS Id 00:00:00:00:00:00 Current INITED 0x00 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x00 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x00 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS I then issued: ifconfig ray0 inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255 up and reran raycontrol (zork) Firmware version 5 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID NETWORK_NAME Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:f8 Fragmentation threshold 0x7fff Bytes Dwell time 0x0080 DWELL_TIME Beacon period 0x0080 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0x4e PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0x04e2 SCAN_DWELL SCAN_MAX_DWELL 0x38a4 SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x32 SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x06 HOP_SEQ HOP_SEQ_LEN 0x4f HOP_SEQ_LEN CW_MAX 0x003f CW_MAX CW_MIN 0x000f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN ALLOW_PROBE_RESP 0x00 ALLOW_PROBE_RESP PRIVACY_MUST_START 0x00 PRIVACY_MUST_START PRIVACY_CAN_JOIN 0x00 PRIVACY_CAN_JOIN BASIC_RATE_SET 0x04 BASIC_RATE_SET Current BSS Id f6:00:6b:bd:bf:68 Current INITED 0x01 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x00 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID NETWORK_NAME Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID NETWORK_NAME Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS Differences found - 2c2 < Network type 0x01 0 Ad hoc, 1 Infrastructure --- > Network type 0x00 0 Ad hoc, 1 Infrastructure 4c4 < SSID ESSID1 --- > SSID NETWORK_NAME 10c10 < Beacon period 0x0100 BEACON_PERIOD --- > Beacon period 0x0080 BEACON_PERIOD 12,14c12,14 < MAX_RETRY 0x1f MAX_RETRY < ACK_TIMO 0x86 ACK_TIMO < SIFS 0x1c SIFS --- > MAX_RETRY 0x07 MAX_RETRY > ACK_TIMO 0xa3 ACK_TIMO > SIFS 0x1d SIFS 29c29 < INFRA_MISSED_BEACON_COUNT 0x02 INFRA_MISSED_BEACON_COUNT --- > INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT 32,33c32,33 < HOP_SEQ 0x0b HOP_SEQ < HOP_SEQ_LEN 0x55 HOP_SEQ_LEN --- > HOP_SEQ 0x06 HOP_SEQ > HOP_SEQ_LEN 0x4f HOP_SEQ_LEN 47,49c47,49 < BASIC_RATE_SET 0x02 BASIC_RATE_SET < Current BSS Id 00:00:00:00:00:00 < Current INITED 0x00 0 Joined a net, 1 Created a net --- > BASIC_RATE_SET 0x04 BASIC_RATE_SET > Current BSS Id f6:00:6b:bd:bf:68 > Current INITED 0x01 0 Joined a net, 1 Created a net 53c53 < Current SSID --- > Current SSID NETWORK_NAME 58c58 < Desired DEF_TXRATE 0x00 Desired DEF_TXRATE --- > Desired DEF_TXRATE 0x04 Desired DEF_TXRATE 61c61 < Desired SSID --- > Desired SSID NETWORK_NAME I then powered up zorba and waited for it to boot. Upon startup, I ran raycontrol: (zorba) Firmware version 5 Network type 0x01 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID ESSID1 Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:d2 Fragmentation threshold 0x7fff Bytes Dwell time 0x0080 DWELL_TIME Beacon period 0x0100 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x1f MAX_RETRY ACK_TIMO 0x86 ACK_TIMO SIFS 0x1c SIFS DIFS 0x82 DIFS PIFS 0x4e PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0x04e2 SCAN_DWELL SCAN_MAX_DWELL 0x38a4 SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x32 SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x02 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x0b HOP_SEQ HOP_SEQ_LEN 0x55 HOP_SEQ_LEN CW_MAX 0x003f CW_MAX CW_MIN 0x000f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN ALLOW_PROBE_RESP 0x00 ALLOW_PROBE_RESP PRIVACY_MUST_START 0x00 PRIVACY_MUST_START PRIVACY_CAN_JOIN 0x00 PRIVACY_CAN_JOIN BASIC_RATE_SET 0x02 BASIC_RATE_SET Current BSS Id 00:00:00:00:00:00 Current INITED 0x00 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x00 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x00 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS The ifconfig - ifconfig ray0 inet 10.1.1.2 netmask 0xffffff00 broadcast 10.1.1.255 up The raycontrol output (zorba) Firmware version 5 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID NETWORK_NAME Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:d2 Fragmentation threshold 0x7fff Bytes Dwell time 0x0080 DWELL_TIME Beacon period 0x0080 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0x4e PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0x04e2 SCAN_DWELL SCAN_MAX_DWELL 0x38a4 SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x32 SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x07 HOP_SEQ HOP_SEQ_LEN 0x4f HOP_SEQ_LEN CW_MAX 0x003f CW_MAX CW_MIN 0x000f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN ALLOW_PROBE_RESP 0x00 ALLOW_PROBE_RESP PRIVACY_MUST_START 0x00 PRIVACY_MUST_START PRIVACY_CAN_JOIN 0x00 PRIVACY_CAN_JOIN BASIC_RATE_SET 0x04 BASIC_RATE_SET Current BSS Id ee:1a:55:55:55:55 Current INITED 0x01 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x00 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID NETWORK_NAME Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID NETWORK_NAME Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS More differences - 2c2 < Network type 0x01 0 Ad hoc, 1 Infrastructure --- > Network type 0x00 0 Ad hoc, 1 Infrastructure 4c4 < SSID ESSID1 --- > SSID NETWORK_NAME 10c10 < Beacon period 0x0100 BEACON_PERIOD --- > Beacon period 0x0080 BEACON_PERIOD 12,14c12,14 < MAX_RETRY 0x1f MAX_RETRY < ACK_TIMO 0x86 ACK_TIMO < SIFS 0x1c SIFS --- > MAX_RETRY 0x07 MAX_RETRY > ACK_TIMO 0xa3 ACK_TIMO > SIFS 0x1d SIFS 29c29 < INFRA_MISSED_BEACON_COUNT 0x02 INFRA_MISSED_BEACON_COUNT --- > INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT 32,33c32,33 < HOP_SEQ 0x0b HOP_SEQ < HOP_SEQ_LEN 0x55 HOP_SEQ_LEN --- > HOP_SEQ 0x07 HOP_SEQ > HOP_SEQ_LEN 0x4f HOP_SEQ_LEN 47,49c47,49 < BASIC_RATE_SET 0x02 BASIC_RATE_SET < Current BSS Id 00:00:00:00:00:00 < Current INITED 0x00 0 Joined a net, 1 Created a net --- > BASIC_RATE_SET 0x04 BASIC_RATE_SET > Current BSS Id ee:1a:55:55:55:55 > Current INITED 0x01 0 Joined a net, 1 Created a net 53c53 < Current SSID --- > Current SSID NETWORK_NAME 58c58 < Desired DEF_TXRATE 0x00 Desired DEF_TXRATE --- > Desired DEF_TXRATE 0x04 Desired DEF_TXRATE 61c61 < Desired SSID --- > Desired SSID NETWORK_NAME For completeness' sake FreeBSD zorba.sf-bay.org 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Mon Nov 13 22:02:00 PST 2000 scott@zorba.sf-bay.org:/export/obj/export/src/sys/ZORBA i386 FreeBSD zork.sf-bay.org 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Fri Nov 17 09:23:42 GMT 2000 root@zork.sf-bay.org:/usr/obj/export/src/sys/ZORK i386 Suggestions more than welcome. \scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message