Date: Sun, 01 Oct 2000 16:54:16 -0700 (PDT) From: John Baldwin <jhb@FreeBSD.org> To: Warner Losh <imp@village.org> Cc: smp@FreeBSD.org Subject: Re: Releasing interrupts? Message-ID: <XFMail.001001165416.jhb@FreeBSD.org> In-Reply-To: <200010010331.VAA14982@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 01-Oct-00 Warner Losh wrote: > In message <XFMail.000930191309.jhb@FreeBSD.org> John Baldwin writes: >: Grr. I'd test it on my laptop, but pccard isnt' attaching to my >: pcic_pci controller. I've tried the following patch but no go: > > The reason is that the pcic_p.c isn't putting the cardbus bridge into > legacy mode correctly. I'd bet a case of beer that the patch you > included won't work. Ok. >: pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0 > > These are always a pita. what kind of laptop do you have? Dell Inspiron 5000e > sudo pciconf -l hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00 pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01 pcic-pci0@pci0:4:0: class=0x060700 card=0x00cc1028 chip=0xac1c104c rev=0x01 hdr=0x02 pcic-pci1@pci0:4:1: class=0x060700 card=0x00cc1028 chip=0xac1c104c rev=0x01 hdr=0x02 isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00 atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00 uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00 none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00 pcm0@pci0:8:0: class=0x040100 card=0x00cc1028 chip=0x1978125d rev=0x10 hdr=0x00 none1@pci0:16:0: class=0x078000 card=0x20001668 chip=0x044811c1 rev=0x01 hdr=0x00 none2@pci1:0:0: class=0x030000 card=0x00cc1028 chip=0x4c461002 rev=0x02 hdr=0x00 > Warner -- John Baldwin <jhb@FreeBSD.org> -- http://www.FreeBSD.org/~jhb/ PGP Key: http://www.baldwin.cx/~john/pgpkey.asc "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.001001165416.jhb>