Date: Sun, 07 Oct 2001 17:46:19 +0000 From: David Rufino <dr263@cam.ac.uk> To: freebsd-hackers@freebsd.org, freebsd-multimedia@freebsd.org Subject: atapi cd problems Message-ID: <3BC094EB.1020702@cam.ac.uk>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------000704070801020104030403 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, I'm having trouble ripping cdda tracks, using cdda2wav under freebsd. As far as I know my IDE setup is fine, and I've successfully done it before. Attached is my dmesg output which should contain all the relevant info. Anyone know why it isn't working? Thanks, David --------------000704070801020104030403 Content-Type: text/plain; name="out" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="out" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Timecounter "i8254" frequency 1193182 Hz CPU: AMD Duron(tm) Processor (755.06-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x631 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 201261056 (196544K bytes) avail memory = 192724992 (188208K bytes) Preloaded elf kernel "kernel" at 0xc0315000. Preloaded elf module "snd_via82c686.ko" at 0xc031509c. Preloaded elf module "snd_pcm.ko" at 0xc0315144. Pentium Pro MTRR support enabled Using $PIR table, 7 entries at 0xc00fdf00 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia GeForce DDR graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0 pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xe800-0xe87f mem 0xdf000000-0xdf00007f irq 11 at device 10.0 on pci0 vr0: Ethernet address: 00:80:c8:d5:6c:cf miibus0: <MII bus> on vr0 amphy0: <DM9101 10/100 media interface> on miibus0 amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc97ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging ncp_load: [210-213] ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA100 acd0: CD-RW <HP CD-Writer+ 7200> at ata1-master using PIO3 acd1: DVD-ROM <DVDROM 10X> at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s1a acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 acd0: READ_CD - ILLEGAL REQUEST asc=21 ascq=07 error=00 --------------000704070801020104030403-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BC094EB.1020702>