Date: Sun, 9 Dec 2001 15:49:12 +0100 From: Andreas Klemm <andreas@FreeBSD.ORG> To: freebsd-stable@FreeBSD.ORG Subject: on every reboot my DeskJet 970 prints a "0" and ejects paper Message-ID: <20011209144912.GA705@titan.klemm.gtn.com> In-Reply-To: <3C1273A2.E269C6BB@vortex.wa4phy.net> References: <3C1273A2.E269C6BB@vortex.wa4phy.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--pf9I7BMVVzbSWLtt
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
My HP DeskJet 970Cxi is connected via parallel centronix cable to
my FreeBSD machine. Has this to do with driver initialization ?
I have this problem since a long time I assume. Mostly printer is
powered-off. But today I wanted to report it in the hope somebody
has a solution/idea/fix.
uname -a:
=3D=3D=3D=3D=3D=3D=3D=3D=3D
FreeBSD titan.klemm.gtn.com 4.4-STABLE FreeBSD 4.4-STABLE #0: Sat Dec 8 17=
:33:34 CET 2001 root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN i3=
86
my printcap:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|raw|hpijs/DJ9xx;r=3D600x600;q=3Dhigh;c=3Dfull;p=3Da4;m=3Dauto:\
:lp=3D/dev/lpt0:\
:if=3D/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
:sd=3D/var/spool/lpd/lp:\
:lf=3D/var/spool/lpd/lp/log:\
:af=3D/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:
# APS1_END - don't delete this
test|Webmin Test:sh:lp=3D/dev/lpt0:mx#0:if=3D/usr/local/etc/webmin/lpadmin/=
drivers/test:sd=3D/var/spool/lpd/test:
BIOS: lpt port set to ECP mode.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D
dmesg output:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #0: Sat Dec 8 17:33:34 CET 2001
root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 997460541 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.46-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 268419072 (262128K bytes)
avail memory =3D 258359296 (252304K bytes)
Preloaded elf kernel "kernel" at 0xc02c9000.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0279442 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f0eb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on =
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 5
pci0: <VIA 83C572 USB controller> at 4.3 irq 5
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xb800-0xb8ff mem 0xed800000-0=
xed800fff irq 9 at device 9.0 on pci0
aic7880: Ultra Single Channel A, SCSI Id=3D7, 16/255 SCBs
pci0: <unknown card> (vendor=3D0x1102, dev=3D0x0002) at 10.0 irq 5
pci0: <unknown card> (vendor=3D0x1102, dev=3D0x7002) at 10.1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xec800000-0=
xec8fffff,0xed000000-0xed000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:d0:b7:ba:c1:c2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcc7ff,0xd0000-0xd0ff=
f on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x8 on isa0
ppc0: SMC-like chipset (ECP-only) in ECP mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 970C> MLC,PCL,PML
imm0: NIBBLE mode unavailable!
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38166MB <ST340823A> [77545/16/63] at ata0-master UDMA66
ad2: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA66
acd0: DVD-ROM <LITEON DVD-ROM LTD122> at ata0-slave using PIO4
acd1: CD-RW <SONY CD-RW CRX140E> at ata1-slave using PIO4
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad2s1a
Best regards
Andreas ///
--=20
Andreas Klemm - Powered by FreeBSD
Need a magic printfilter today ? http://www.apsfilter.org/
Songs from our band >> 64Bits << http://www.64bits.de
Inofficial band pages with add-on stuff http://www.apsfilter.org/64bits.ht=
ml
--pf9I7BMVVzbSWLtt
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE8E3nod3o+lGxvbLoRAqBbAJ9DHrVZvYT6oyJ53rE4REn5DwoEpwCdHN0W
7n7aLPtey6hwxHEvaWYCFw0=
=doqO
-----END PGP SIGNATURE-----
--pf9I7BMVVzbSWLtt--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011209144912.GA705>