From owner-freebsd-mobile  Sun Aug 18  0: 8:14 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 31C7537B400
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 00:08:12 -0700 (PDT)
Received: from mpool.solaris.ru (mpool.solaris.ru [194.85.25.2])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 25AB343E72
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 00:08:11 -0700 (PDT)
	(envelope-from kirill@mpool.solaris.ru)
Received: (from kirill@localhost)
	by mpool.solaris.ru (8.9.3/8.9.3) id LAA33886;
	Sun, 18 Aug 2002 11:08:08 +0400 (MSD)
Date: Sun, 18 Aug 2002 11:08:07 +0400
From: Kirill Bezzubets <kirill@solaris.ru>
To: Emanuel Haupt <emanuel.haupt@cablecom.ch>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: pcmcia modem
Message-ID: <20020818110807.A13620@solaris.ru>
References: <20020816132451.21c47f46.emanuel.haupt@cablecom.ch>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <20020816132451.21c47f46.emanuel.haupt@cablecom.ch>; from emanuel.haupt@cablecom.ch on Fri, Aug 16, 2002 at 01:24:51PM +0200
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Fri, Aug 16, 2002 at 01:24:51PM +0200, Emanuel Haupt wrote:

> i have a pcmcia modem card on my dell latitude cpx.
> 
> dmesg says:
> orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0

orm0 is nothing to do with pcmcia modem. ;)

> 
> i have actually never used freebsd with a pcmcia modem before.
> 

Any other PC Cards?

> could someone maybe give me some short instructions how to
> make that beast work?
> 
> i heared there are some difficulties with pcmcia modems.

I've used several types of 3Com and Xircom models -
none of them has any difficulties to use. 
Just like usual external modem. ;)

> ifconfig also doesn't show me an aditional device.

ifconfig won't show anything until you set up proper PPP/SLIP(?)
connection over serial device such as your modem.

Now, there's still some questions:

1st: Does your system recognize your modem as sioN?
     It should be said in messages like "...card inserted... sioN at..."

2nd: Can you use sioN to which your modem attached?

3rd: Can you communicate with your modem using cu/ecu?

-- 
BR,
Kirill Bezzubets                                CASE-RIPE CASE-RIPN
Senior Administrator, Technical Department      mailto:kirill@solaris.ru
Solaris ISP & Telecommunications Co. Ltd        http://www.solaris.ru

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  0:45:29 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id C182037B400
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 00:45:27 -0700 (PDT)
Received: from bessel.tekniikka.turkuamk.fi (bessel.tekniikka.turkuamk.fi [193.166.133.10])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B7A2B43E42
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 00:45:26 -0700 (PDT)
	(envelope-from eyurtese@bessel.tekniikka.turkuamk.fi)
Received: from localhost (eyurtese@localhost)
	by bessel.tekniikka.turkuamk.fi (8.9.2/8.9.2) with ESMTP id KAA39732;
	Sun, 18 Aug 2002 10:45:17 +0300
Date: Sun, 18 Aug 2002 10:45:17 +0300 (WET)
From: Evren Yurtesen <eyurtese@turkuamk.fi>
To: "Alan B. Clegg" <alan-dated-1030068758.23ca96@clegg.com>
Cc: mobile@freebsd.org
Subject: Re:(2) OpenAP+ IBSS and BSS with multiple FreeBSD Wireless Gateways
In-Reply-To: <20020817221238.A20766@shazam.wetworks.org>
Message-ID: <Pine.A41.4.10.10208181040151.88330-100000@bessel.tekniikka.turkuamk.fi>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I understand what you mean. I thought of this but I want to go where
ethernet cant go. I need to use the same wireless card for
Simultaneous Bridge + Access Point + Repeater 
Like the OpenAP but unfortunately it doesnt work on pc
http://opensource.instant802.com/what_is_openap.php

I still dont understand one thing. If the OpenAP can do this
and the sources are available. Why can't somebody write a little program
for FreeBSD which will do the same on PC? =)

Evren

On Sat, 17 Aug 2002, Alan B. Clegg wrote:

> Unless the network is lying to me again, Evren Yurtesen said: 
> > Yes but thats not what I ment. I want to use only 1 card and antenna for
> > both bridging/repeating and gateway. I need functionality like in 
> > some www.speedlan.com products.
> 
> Yes, you bridge the ethernet and the wi0 interfaces across the hostap
> machines.  I have two hostap boxes running just like this and can roam
> between them just fine...  I see no reason that you could not expand to
> more.
> 
> Let me know if you want the scripts that I use to configure the
> interfaces.
> 
> AlanC
> -- 
>                | Alan Clegg | Networks | Security | UNIX | 802.11 | 
>    "you just have to be smarter than what you're working on." - Scott Lauren
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  1: 2:11 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 099F437B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 01:02:10 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 0686743E72
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 01:02:09 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7I825Fl001085;
	Sun, 18 Aug 2002 02:02:05 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 02:00:43 -0600 (MDT)
Message-Id: <20020818.020043.17724148.imp@bsdimp.com>
To: eyurtese@turkuamk.fi
Cc: alan-dated-1030068758.23ca96@clegg.com, mobile@FreeBSD.ORG
Subject: Re: (2) OpenAP+ IBSS and BSS with multiple FreeBSD Wireless
 Gateways
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <Pine.A41.4.10.10208181040151.88330-100000@bessel.tekniikka.turkuamk.fi>
References: <20020817221238.A20766@shazam.wetworks.org>
	<Pine.A41.4.10.10208181040151.88330-100000@bessel.tekniikka.turkuamk.fi>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <Pine.A41.4.10.10208181040151.88330-100000@bessel.tekniikka.turkuamk.fi>
            Evren Yurtesen <eyurtese@turkuamk.fi> writes:
: I understand what you mean. I thought of this but I want to go where
: ethernet cant go. I need to use the same wireless card for
: Simultaneous Bridge + Access Point + Repeater 
: Like the OpenAP but unfortunately it doesnt work on pc
: http://opensource.instant802.com/what_is_openap.php
: 
: I still dont understand one thing. If the OpenAP can do this
: and the sources are available. Why can't somebody write a little program
: for FreeBSD which will do the same on PC? =)

Because no one has done it yet.  Also, it is GPL'd :-).  And there's a
lot of source there to plow through.

I've not had time, nor will I have time for a while to look at this
carefully.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  1:57:34 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 3004037B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 01:57:32 -0700 (PDT)
Received: from bessel.tekniikka.turkuamk.fi (bessel.tekniikka.turkuamk.fi [193.166.133.10])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3DAEE43E6E
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 01:57:31 -0700 (PDT)
	(envelope-from eyurtese@bessel.tekniikka.turkuamk.fi)
Received: from localhost (eyurtese@localhost)
	by bessel.tekniikka.turkuamk.fi (8.9.2/8.9.2) with ESMTP id LAA36888;
	Sun, 18 Aug 2002 11:57:25 +0300
Date: Sun, 18 Aug 2002 11:57:25 +0300 (WET)
From: Evren Yurtesen <eyurtese@turkuamk.fi>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: mobile@FreeBSD.ORG
Subject: Re: (2) OpenAP+ IBSS and BSS with multiple FreeBSD Wireless Gateways
In-Reply-To: <20020818.020043.17724148.imp@bsdimp.com>
Message-ID: <Pine.A41.4.10.10208181153210.88330-100000@bessel.tekniikka.turkuamk.fi>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Well it seems there is no way but getting this OpenAP compatible wireless
access points.

I was also wondering about the pc cards with multiple antenna. Do they
share the same circuit or they are seperate? Can they work at the same
time? If they are not different circuit. Does it lower the transmit power
since we would be transmitting to 2 antennas at the same time?

Evren

On Sun, 18 Aug 2002, M. Warner Losh wrote:

> In message: <Pine.A41.4.10.10208181040151.88330-100000@bessel.tekniikka.turkuamk.fi>
>             Evren Yurtesen <eyurtese@turkuamk.fi> writes:
> : I understand what you mean. I thought of this but I want to go where
> : ethernet cant go. I need to use the same wireless card for
> : Simultaneous Bridge + Access Point + Repeater 
> : Like the OpenAP but unfortunately it doesnt work on pc
> : http://opensource.instant802.com/what_is_openap.php
> : 
> : I still dont understand one thing. If the OpenAP can do this
> : and the sources are available. Why can't somebody write a little program
> : for FreeBSD which will do the same on PC? =)
> 
> Because no one has done it yet.  Also, it is GPL'd :-).  And there's a
> lot of source there to plow through.
> 
> I've not had time, nor will I have time for a while to look at this
> carefully.
> 
> Warner
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  2:57:42 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 8B7F137B400
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 02:57:39 -0700 (PDT)
Received: from dmlb.org (pc1-cmbg2-6-cust106.cam.cable.ntl.com [80.4.4.106])
	by mx1.FreeBSD.org (Postfix) with ESMTP id A46DC43E3B
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 02:57:38 -0700 (PDT)
	(envelope-from dmlb@dmlb.org)
Received: from slave.my.domain ([192.168.200.39])
	by dmlb.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 3.36 #1)
	id 17gMoK-000F9s-00; Sun, 18 Aug 2002 10:57:28 +0100
Received: from dmlb by slave.my.domain with local (Exim 3.36 #1)
	id 17gMoK-0000by-00; Sun, 18 Aug 2002 10:57:28 +0100
Message-ID: <XFMail.20020818105728.dmlb@computer.my.domain>
X-Mailer: XFMail 1.5.2 on FreeBSD
X-Priority: 3 (Normal)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
In-Reply-To: <20020817.154929.130696556.imp@bsdimp.com>
Date: Sun, 18 Aug 2002 10:57:28 +0100 (BST)
From: Duncan Barclay <dmlb@dmlb.org>
To: "M. Warner Losh" <imp@bsdimp.com>
Subject: Re: IBSS and BSS with multiple FreeBSD Wireless Gateways
Cc: mobile@FreeBSD.ORG, eyurtese@turkuamk.fi
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


On 17-Aug-2002 M. Warner Losh wrote:
> In message:
> <Pine.A41.4.10.10208171330130.4338-100000@bessel.tekniikka.turkuamk.fi>
>             Evren Yurtesen <eyurtese@turkuamk.fi> writes:
>: Is it possible to use FreeBSD with IBSS or BSS mode as a bridge to
>: overcome line of sight issues? and provide roaming for mobile users?

For 802.11 specified roaming to work, you need to be in BSS mode and
set up an ESS - extended service set. The APs all need to talk to each
other so that the _single_ gateway to the rest of the internet knows
where to send packets. Traditionally this was done with a propiertry
protocol, but there is now a standard way of doing this- 802.11d I think.
 
>: Another question is if we are using IBSS mode and 2 clients are close
>: to each other but the gateway is little bit more far away. Does it cause
>: the clients to choose each other instead of the gateway because they
>: have stronger signal? If this happens, wouldnt this cause the link to 
>: the gateway be broken?
>
> IBSS mode causes people to try to talk directly to each other as much
> as possible.  I don't know what the relaying rules for ibss are, but
> if you need to rely on a man in the middle, then you are likely going
> to be frustrated.  I've never tried it, so maybe it just works, but I
> kinda doubt it.  Grab, read and understand the 802.11 spec :-)

IBSS does not have relaying. An IBSS can be simply viewed as wireless
Ethernet. I.e. direct peer to peer connections with stations communicating
directly with each other. If an IP packet is destined to go the the
outside world, the packet is sent directly to the gateway machine - this
isn't 802.11, but IP routing.

The reason IBSS does not have relaying, and the reason that all station to
station traffic in an BSS goes via the AP is basically the same. It is a lot
easier to implement roaming and relaying in wireless systems, when there are
defined network entities such as a basestation, i.e. and AP. Some people have
played with relaying in IBSS but it requires changes to the protocol stack
within the cards.

Duncan

-- 
________________________________________________________________________
Duncan Barclay  | God smiles upon the little children,
dmlb@dmlb.org   | the alcoholics, and the permanently stoned.
dmlb@freebsd.org| Steven King

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  3: 8:16 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A8A6537B400
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 03:08:12 -0700 (PDT)
Received: from dmlb.org (pc1-cmbg2-6-cust106.cam.cable.ntl.com [80.4.4.106])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 2A9F243E65
	for <mobile@freebsd.org>; Sun, 18 Aug 2002 03:08:12 -0700 (PDT)
	(envelope-from dmlb@dmlb.org)
Received: from slave.my.domain ([192.168.200.39])
	by dmlb.org with esmtp (TLSv1:DES-CBC3-SHA:168)
	(Exim 3.36 #1)
	id 17gMyC-000FAB-00; Sun, 18 Aug 2002 11:07:40 +0100
Received: from dmlb by slave.my.domain with local (Exim 3.36 #1)
	id 17gMyC-0000cI-00; Sun, 18 Aug 2002 11:07:40 +0100
Message-ID: <XFMail.20020818110740.dmlb@computer.my.domain>
X-Mailer: XFMail 1.5.2 on FreeBSD
X-Priority: 3 (Normal)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
In-Reply-To: <Pine.A41.4.10.10208181153210.88330-100000@bessel.tekniikka.turkuamk.fi>
Date: Sun, 18 Aug 2002 11:07:40 +0100 (BST)
From: Duncan Barclay <dmlb@dmlb.org>
To: Evren Yurtesen <eyurtese@turkuamk.fi>
Subject: Re: (2) OpenAP+ IBSS and BSS with multiple FreeBSD Wireless Gate
Cc: mobile@FreeBSD.ORG, "M. Warner Losh" <imp@bsdimp.com>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


On 18-Aug-2002 Evren Yurtesen wrote:
> Well it seems there is no way but getting this OpenAP compatible wireless
> access points.
> 
> I was also wondering about the pc cards with multiple antenna. Do they
> share the same circuit or they are seperate? Can they work at the same
> time? If they are not different circuit. Does it lower the transmit power
> since we would be transmitting to 2 antennas at the same time?
> 
> Evren

Cards with two antennas have them to implement a radio technique called
antenna diversity. Put simply, the two antennas are arranged to see slightly
different versions of the radio signals (through pointing is slightly
different directions or by simply being placed in different places).

This technique is used to get round a radio problem called multipath fading;
you are likely to have experienced this when listening to FM radio in
the car. The signal strength can go up and down in a very short distance
because of constructive/destructive mutiple reflections (I often notice
this sitting in traffic, and moving the car a metre or two gives me a better
signal).

The use of the diversity in most 802.11 cards is this. For receive, the
receiver takes a signal strength measurement on antenna A and then
on antenna B (in about 5us). This occurs during a preamble to the data
pacaket. The radio then chooses the strongest antenna to
receive the whole packet with.

For transmit, the radio will transmit a packet out on antenna A. If it does
not receive the ACK from the destination station, it will retry (as specified
in 802.11) but now it chooses antenna B. A simple cache can be used to
improve the chance that a transmitted packet get through.

Physically in the radio, there is one receiver, one transmitter and a little
switch that routes the input/output of the radio to the desired antenna. Note,
this is true for 802.11b systems - 802.11a may use two receivers becuase the
time available to make the comparative measurements is very short.

Duncan

-- 
________________________________________________________________________
Duncan Barclay  | God smiles upon the little children,
dmlb@dmlb.org   | the alcoholics, and the permanently stoned.
dmlb@freebsd.org| Steven King

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  3:57:45 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 570F437B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 03:57:43 -0700 (PDT)
Received: from itworks.com.au (dsl-210-15-243-22.Melbourne.netspace.net.au [210.15.243.22])
	by mx1.FreeBSD.org (Postfix) with SMTP id C399B43E3B
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 03:57:41 -0700 (PDT)
	(envelope-from gavin@itworks.com.au)
Received: (qmail 446 invoked from network); 18 Aug 2002 10:56:28 -0000
Received: from unknown (HELO bugs) (192.168.1.100)
  by chip.gav.itworks.com.au with SMTP; 18 Aug 2002 10:56:28 -0000
Message-ID: <075b01c246a6$15c199c0$6401a8c0@bugs>
From: "Gavin Cameron" <gavin@itworks.com.au>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: <mobile@FreeBSD.ORG>
References: <009a01c242d2$0d9fd860$6401a8c0@bugs><20020813.081229.38051251.imp@bsdimp.com><028a01c2444e$f58e0b60$6401a8c0@bugs> <20020815.100500.23798930.imp@bsdimp.com>
Subject: Re: Latest wi0 crashes with stable
Date: Sun, 18 Aug 2002 20:57:46 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

> 
> OK.  Try rolling forward just the wi_hostap.* changes and let me know
> if that changes anything.  If not, then roll forward the .h changes.
> If not, then roll forward if_wi.c.  That should be safe, but lemme
> know if it isn't.


Rolling forward wi_hostap.* causes no errors.
Rolling forward *.h causes no errors.

It's if_wi.c that causes the problem. The interface dies after
transferring a couple of MBytes.

> 
> : Let me know if there's anything else you need me to do or if you
> : need more info.
> 
> This is great information.  We're getting close.
> 
> Are you bridging, and if so how?
> 
Nope... no bridging.

Gavin

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  5:29:19 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 354AE37B400
	for <freebsd-mobile@FreeBSD.org>; Sun, 18 Aug 2002 05:28:56 -0700 (PDT)
Received: from mpool.solaris.ru (mpool.solaris.ru [194.85.25.2])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3857A43E70
	for <freebsd-mobile@FreeBSD.org>; Sun, 18 Aug 2002 05:28:55 -0700 (PDT)
	(envelope-from kirill@mpool.solaris.ru)
Received: (from kirill@localhost)
	by mpool.solaris.ru (8.9.3/8.9.3) id QAA91295;
	Sun, 18 Aug 2002 16:28:52 +0400 (MSD)
Date: Sun, 18 Aug 2002 16:28:52 +0400
From: Kirill Bezzubets <kirill@solaris.ru>
To: Emanuel Haupt <emanuel.haupt@cablecom.ch>
Cc: freebsd-mobile@FreeBSD.org
Subject: Re: pcmcia modem
Message-ID: <20020818162851.A77100@solaris.ru>
References: <20020816132451.21c47f46.emanuel.haupt@cablecom.ch> <20020818110807.A13620@solaris.ru> <20020818120556.20db0764.emanuel.haupt@cablecom.ch> <20020818141450.A8702@solaris.ru> <20020818123339.0a6d2906.emanuel.haupt@cablecom.ch>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <20020818123339.0a6d2906.emanuel.haupt@cablecom.ch>; from emanuel.haupt@cablecom.ch on Sun, Aug 18, 2002 at 12:33:39PM +0200
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Sun, Aug 18, 2002 at 12:33:39PM +0200, Emanuel Haupt wrote:

> > > > 3rd: Can you communicate with your modem using cu/ecu?
> > > 
> > > cu -l /dev/cuaa4 -s 9600
> > > freezes freebsd completely!
> > > 
> 
> 
> its freebsd 5.0-DP1. i am using the NEWCARD kernel because
> sometimes i need other cards: ethernetcard, wireless card. but
> while that "irq trouble" happens there is no other pcmcia card
> inserted.

Actually, I never tried NEWCARD kernel yet.
The only 5.0-DP1 I have is my desktop, my notebook is 4.6-STABLE.
So it's better to address your question to M. Warner Losh,
I see lines that might describe problem, but I don't know the meaning:

> pccard1: Allocation failed for cfe 32
> pccard1: Allocation failed for cfe 33

> 
> it might help you to see my whole dmesg output:
> 
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> 1993, 1994
> 	The Regents of the University of California. All rights
> reserved.
> FreeBSD 5.0-DP1 #0: Fri Jul 26 10:40:11 CEST 2002
>     root@:/usr/src/sys/i386/compile/DEEDEE
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0570000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05700a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 498470138 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz
> 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
>  
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTR
> R,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 134066176 (130924K bytes)
> avail memory = 124407808 (121492K bytes)
> Pentium Pro MTRR support enabled
> Using $PIR table, 6 entries at 0xc00fbd20
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <DELL   CPi R  > on motherboard
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 5
> Timecounter "ACPI-safe"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on
> acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> acpi_cmbat0: <Control method Battery> on acpi0
> acpi_cmbat1: <Control method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <PCI bus> on acpi_pcib0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pccbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0
> cardbus0: <CardBus bus> on pccbb0
> pccard0: <16-bit PCCard bus> on pccbb0
> acpi_pcib0: device is routed to IRQ 11
> pccbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0
> cardbus1: <CardBus bus> on pccbb1
> pccard1: <16-bit PCCard bus> on pccbb1
> acpi_pcib0: device is routed to IRQ 11
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at
> device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
> 0xdce0-0xdcff irq 11 at device 7.2 on pci0
> usb0: cannot stop
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> pci0: <multimedia, audio> at device 8.0 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on
> acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model GlidePoint, device ID 0
> fdc0: <enhanced floppy controller (i82077, NE72065 or clone)>
> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> system power profile changed to 'economy'
> wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0
> config 1 on pccard0
> wi0: 802.11 address: 00:90:d1:07:b0:64
> wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A, Firmware:
> 1.4 variant 9
> pccard1: Allocation failed for cfe 32
> pccard1: Allocation failed for cfe 33
> ed1: Total wildcard entry ignored for SVEC PN650TX 10/100 Dual
> Speed Fast Ethernet PC Card
> sio4 at port 0x3e8-0x3ef irq 11 function 0 config 34 on
> pccard1
> sio4: type 16550A
> sio4: unable to activate interrupt in fast mode - using normal
> mode
> ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master
> UDMA33
> acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a

-- 
BR,
Kirill Bezzubets                                CASE-RIPE CASE-RIPN
Senior Administrator, Technical Department      mailto:kirill@solaris.ru
Solaris ISP & Telecommunications Co. Ltd        http://www.solaris.ru

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  8:18: 1 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 887FD37B400; Sun, 18 Aug 2002 08:17:46 -0700 (PDT)
Received: from spyder.bytecraft.au.com (bytecr1.lnk.telstra.net [139.130.142.13])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id E46CD43E6A; Sun, 18 Aug 2002 08:17:44 -0700 (PDT)
	(envelope-from root@bytecraft.au.com)
Received: by spyder.bytecraft.au.com (Postfix, from userid 0)
	id 58AA0BA80; Mon, 19 Aug 2002 01:17:43 +1000 (EST)
Date: Mon, 19 Aug 2002 01:17:43 +1000
From: Charlie & <root@spyder.bytecraft.au.com>
To: freebsd-mobile@freebsd.org, freebsd-hackers@freebsd.org
Subject:  Cant get PCCARD stuff working
Message-ID: <20020819011743.A10172@spyder.bytecraft.au.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Reposted to mobile and hackers as no answer on questions

The only extra item I have gleaned from archives is some comment 
from Warner (?) about s memory mapping issue, which I have not 
found any follow up on...

original message follows --------8<------------


I am trying to get a Card Master PCI-IF{T/I) card working so that I can
create miniBSD Cf images for some new firewall boxes. At least that is the idea..

However I dont seem to be able to ge the Flash recognised..
I am not sure even if the PCMCIA PCI interface is working properly..
ie I have not been here before.

I have seen  stuff in the archives with the same TI1420 chip being 
recognised on the PCI buss, so Im hopeful there. But I am currently stuck
and need help.

The Box is an IBM xSeries 300 server and runs all the rest of FreeBSD 
Aok. 
Build world done this morning (in 40 minutes), from CVSup sources bout 24 hours old

If the PCCARD gurus need any more data just let me know..

and  H E L P  please


Murray Taylor
Special Projects Engineer
Bytecraft Systems

---------------------------------------------------------------------

insert Panasonic CF carrier with Sandisk 32M CF module

spyder# pccardc dumpcis
2 slots found
spyder# pccardc rdreg
Registers for slot 0
00: 84 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Registers for slot 1
00: 84 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
spyder# pccardc rdmap
Mem 0: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x  0 size 0 bytes
I/O 1: flags 0x000 port 0x  0 size 0 bytes
Mem 0: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x  0 size 0 bytes
I/O 1: flags 0x000 port 0x  0 size 0 bytes

spyder# pccardc power 0 1
spyder# pccardc power 1 1

(extract from /var/log/messages)

Aug 16 08:34:00 spyder /kernel: pccard: card inserted, slot 0
Aug 16 08:34:05 spyder pccardd[48]: No card in database for "(null)"("(null)")
Aug 16 08:51:10 spyder /kernel: pccard: card inserted, slot 1
Aug 16 08:51:16 spyder pccardd[48]: No card in database for "(null)"("(null)")

spyder# pccardc dumpcis
Read return -1 bytes (expected 2)
pccardc: CIS code read: Cannot allocate memory
Read return -1 bytes (expected 10)
Configuration data for card in slot 0
Read return -1 bytes (expected 2)
pccardc: CIS code read: Cannot allocate memory
Read return -1 bytes (expected 10)
Configuration data for card in slot 1
2 slots found

spyder# pccardc rdreg
Registers for slot 0
00: 84 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Registers for slot 1
00: 84 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

spyder# pccardc rdmap
Mem 0: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x  0 size 0 bytes
I/O 1: flags 0x000 port 0x  0 size 0 bytes
Mem 0: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x  0 size 0 bytes
I/O 1: flags 0x000 port 0x  0 size 0 bytes

spyder# more /etc/rc.conf
# -- sysinstall generated deltas -- # Thu May 16 08:01:23 2002
# Created: Thu May 16 08:01:23 2002
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
hostname="spyder.bytecraft.au.com"
ifconfig_fxp0="inet 10.0.0.2/20"
##ifconfig_fxp1="inet 192.168.4.1 netmask 255.255.255.252"
defaultrouter="10.0.0.1"
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="NO"
moused_type="NO"
nfs_reserved_port_only="YES"
saver="logo"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
pccard_enable="YES"

spyder# more /etc/pccard.conf 
debuglevel 4


spyder# uname -a
FreeBSD spyder.bytecraft.au.com 4.6-STABLE FreeBSD 4.6-STABLE #0: Fri Aug 16 08:26:33 EST 2002     root@spyder.bytecraft.au.com:/usr/obj/usr/src/sys/GENERIC  i386

spyder# cat /var/run/dmesg.boot
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #0: Fri Aug 16 08:26:33 EST 2002
    root@spyder.bytecraft.au.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1000.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 517353472 (505228K bytes)
Preloaded elf kernel "kernel" at 0xc04d6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdcc0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0xdd0c4000-0xdd0c4fff irq 5 at device 9.0 on pci0
pcic0: TI12XX PCI Config Reg: [pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> mem 0xdd0c9000-0xdd0c9fff irq 7 at device 9.1 on pci0
pcic1: TI12XX PCI Config Reg: [pwr save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc3f mem 0xdd080000-0xdd09ffff,0xdd0c3000-0xdd0c3fff irq 11 at device 13.0 on 
pci0
fxp0: Ethernet address 00:02:55:fa:76:5f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xe000-0xe03f mem 0xdd0a0000-0xdd0bffff,0xdd0c6000-0xdd0c6fff irq 10 at device 14.0 on 
pci0
fxp1: Ethernet address 00:02:55:fa:76:60
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 Savage 4 graphics accelerator> at 15.0 irq 5
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd57ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 19470MB <ST320011A> [39560/16/63] at ata0-master UDMA100
acd0: CDROM <LG CD-ROM CRN-8245B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
spyder#

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message

************************************************************************
This Email has been scanned for Viruses by MailMarshal
an automated gateway email virus scanner.

************************************************************************

----- End forwarded message -----

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  9:24:17 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id C1FBC37B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 09:24:14 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id C23A843E4A
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 09:24:13 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7IGOCFl002599;
	Sun, 18 Aug 2002 10:24:12 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 10:17:12 -0600 (MDT)
Message-Id: <20020818.101712.32713693.imp@bsdimp.com>
To: eyurtese@turkuamk.fi
Cc: mobile@FreeBSD.ORG
Subject: Re: (2) OpenAP+ IBSS and BSS with multiple FreeBSD Wireless
 Gateways
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <Pine.A41.4.10.10208181153210.88330-100000@bessel.tekniikka.turkuamk.fi>
References: <20020818.020043.17724148.imp@bsdimp.com>
	<Pine.A41.4.10.10208181153210.88330-100000@bessel.tekniikka.turkuamk.fi>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <Pine.A41.4.10.10208181153210.88330-100000@bessel.tekniikka.turkuamk.fi>
            Evren Yurtesen <eyurtese@turkuamk.fi> writes:
: Well it seems there is no way but getting this OpenAP compatible wireless
: access points.
: 
: I was also wondering about the pc cards with multiple antenna. Do they
: share the same circuit or they are seperate? Can they work at the same
: time? If they are not different circuit. Does it lower the transmit power
: since we would be transmitting to 2 antennas at the same time?

Usually it is 1 send, multiple receive.  There's only one radio in
these cards.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18  9:39:48 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 53A6A37B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 09:39:46 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 8A89243E6E
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 09:39:45 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7IGdhFl002659;
	Sun, 18 Aug 2002 10:39:44 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 10:38:16 -0600 (MDT)
Message-Id: <20020818.103816.01051524.imp@bsdimp.com>
To: gavin@itworks.com.au
Cc: mobile@FreeBSD.ORG
Subject: Re: Latest wi0 crashes with stable
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <075b01c246a6$15c199c0$6401a8c0@bugs>
References: <028a01c2444e$f58e0b60$6401a8c0@bugs>
	<20020815.100500.23798930.imp@bsdimp.com>
	<075b01c246a6$15c199c0$6401a8c0@bugs>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <075b01c246a6$15c199c0$6401a8c0@bugs>
            "Gavin Cameron" <gavin@itworks.com.au> writes:
: > 
: > OK.  Try rolling forward just the wi_hostap.* changes and let me know
: > if that changes anything.  If not, then roll forward the .h changes.
: > If not, then roll forward if_wi.c.  That should be safe, but lemme
: > know if it isn't.
: 
: 
: Rolling forward wi_hostap.* causes no errors.
: Rolling forward *.h causes no errors.
: 
: It's if_wi.c that causes the problem. The interface dies after
: transferring a couple of MBytes.

Good information!  I'll see about a small patch to see if that
helps/hurts things for you.

: > : Let me know if there's anything else you need me to do or if you
: > : need more info.
: > 
: > This is great information.  We're getting close.
: > 
: > Are you bridging, and if so how?
: > 
: Nope... no bridging.

OK.  You aren't by chance running dhclient on the wi0 interface are
you?

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 10:25:15 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 069D037B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 10:25:13 -0700 (PDT)
Received: from mta7.pltn13.pbi.net (mta7.pltn13.pbi.net [64.164.98.8])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B941343E6A
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 10:25:12 -0700 (PDT)
	(envelope-from fscked@pacbell.net)
Received: from pacbell.net ([66.124.232.194])
 by mta7.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May  7 2001))
 with ESMTP id <0H1100802V206F@mta7.pltn13.pbi.net> for mobile@FreeBSD.ORG;
 Sun, 18 Aug 2002 10:25:12 -0700 (PDT)
Date: Sun, 18 Aug 2002 10:28:24 -0700
From: richard childers <fscked@pacbell.net>
Subject: 802.11b antennas
To: mobile@FreeBSD.ORG
Message-id: <3D5FD938.19F2D00E@pacbell.net>
MIME-version: 1.0
X-Mailer: Mozilla 4.79 [en] (WinNT; U)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
X-Accept-Language: en
References:
 <Pine.A41.4.10.10208171330130.4338-100000@bessel.tekniikka.turkuamk.fi>
 <3D5E98FF.82CD061E@pacbell.net> <20020817.141537.108956335.imp@bsdimp.com>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I was thumbing through a Jameco catalog last night and noticed that they offer 2.4
GHz antenna boosters (PN 174748, 179872), a high-gain directional antenna (or is
that redundant? - PN 174721), and something called a '2.4 GHz SMA RF Antenna' (PN
179864) that looks like it might fit onto some of the WAPs I've seen (but I'm not
sure what 'SMA' refers to).

Note that none of this equipment was originally made for 802.11b-specific markets
and that careful reading of the device and antenna specifications, paying
attention to ohms and milliamps and such, is indicated.

Jameco's phone number is 800-831-4242.

I haven't looked recently but NASA Tech Briefs (the magazine) is a great source of
space-age supplies (duh :-); specifically, things like EMF shielding materials and
the like. Warner, you might want to check them out WRT tin foil equivalents.

Both of these are on the Web, I suppose, but I leave digging them up as exercises
for interested readers.

I suppose somewhere on the 'Nyet there may be a compendium of 802.11b antennae
wisdom, by now, that we could all stand to reference ... if not, maybe someone
should start one.

I went looking for the 802.11b specifications and encountered indications that
they are accessible only to IEEE members. Anyone have a URL to a public copy?

(That goes for all of 'em; 802.11[a-z].)

You'd think they'd be on a server, *somewhere* on the UC Berkeley campus ...


-- richard

--

Richard A Childers/KG6HAC -- Senor UNIX System & Network Administrator
"Dont forget nothing." Maj Rogers, standing orders, 1st Ranger Bn, 1759



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 12:16:46 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CEDD737B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:16:44 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 0774243E6E
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:16:43 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7IJGUFl003150;
	Sun, 18 Aug 2002 13:16:30 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 13:14:51 -0600 (MDT)
Message-Id: <20020818.131451.51626124.imp@bsdimp.com>
To: fscked@pacbell.net
Cc: mobile@FreeBSD.ORG
Subject: Re: 802.11b antennas
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <3D5FD938.19F2D00E@pacbell.net>
References: <3D5E98FF.82CD061E@pacbell.net>
	<20020817.141537.108956335.imp@bsdimp.com>
	<3D5FD938.19F2D00E@pacbell.net>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <3D5FD938.19F2D00E@pacbell.net>
            richard childers <fscked@pacbell.net> writes:
: offer 2.4 GHz antenna boosters (PN 174748, 179872), a high-gain
: directional antenna (or is that redundant? - PN 174721), and
: something called a '2.4 GHz SMA RF Antenna' (PN 179864) that looks
: like it might fit onto some of the WAPs I've seen (but I'm not sure
: what 'SMA' refers to).

SMA is a type of connector.  Often times you'll see SMA or N in the
product description to tell you the connector you need to connect to.
The booster may be anything from a simple omni antenna to an
amplifier.

: Note that none of this equipment was originally made for
: 802.11b-specific markets and that careful reading of the device and
: antenna specifications, paying attention to ohms and milliamps and
: such, is indicated.

Antennas don't care what protocol you are talking over.  I really
doubt that 802.11b vs non-802.11 makes one wit of difference.

: I haven't looked recently but NASA Tech Briefs (the magazine) is a
: great source of space-age supplies (duh :-); specifically, things
: like EMF shielding materials and the like. Warner, you might want to
: check them out WRT tin foil equivalents.

All I know is that wrapping my lucent card in tinfoil didn't keep it
from interferring with other 802.11b equiptment in the house.  Didn't
do any calculations, but it seemed to attenuate things by only 2dB or
so, but that could easily be in the noise.

: I went looking for the 802.11b specifications and encountered
: indications that they are accessible only to IEEE members. Anyone
: have a URL to a public copy?  (That goes for all of 'em;
: 802.11[a-z].)

All the ieee standards are available from:
	http://standards.ieee.org/getieee802/

I've grabbed them many times.  You have to agree to the terms and
conditions, but then you get nearly all the relevant stuff.  (802.11g
isn't available yet that I could see, but that's not too relevant).

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 12:20:41 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1E86437B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:20:38 -0700 (PDT)
Received: from critter.freebsd.dk (critter.freebsd.dk [212.242.86.163])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3F62643E65
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:20:37 -0700 (PDT)
	(envelope-from phk@critter.freebsd.dk)
Received: from critter.freebsd.dk (localhost [127.0.0.1])
	by critter.freebsd.dk (8.12.3/8.12.2) with ESMTP id g7IJGwRo083819;
	Sun, 18 Aug 2002 21:17:09 +0200 (CEST)
	(envelope-from phk@critter.freebsd.dk)
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: fscked@pacbell.net, mobile@FreeBSD.ORG
Subject: Re: 802.11b antennas 
In-Reply-To: Your message of "Sun, 18 Aug 2002 13:14:51 MDT."
             <20020818.131451.51626124.imp@bsdimp.com> 
Date: Sun, 18 Aug 2002 21:16:58 +0200
Message-ID: <83818.1029698218@critter.freebsd.dk>
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message <20020818.131451.51626124.imp@bsdimp.com>, "M. Warner Losh" writes:

>All I know is that wrapping my lucent card in tinfoil didn't keep it
>from interferring with other 802.11b equiptment in the house.  Didn't
>do any calculations, but it seemed to attenuate things by only 2dB or
>so, but that could easily be in the noise.

You metal about three times the thickness of regular kitchen-tinfoil
and you need to get it connected to the metal case of the card.

If you just wrap the tinfoil around the plastic part, it will just
act like a capacitor in series with the antenna and likely as not
not make any difference at all.

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 12:27:56 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 2C67137B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:27:55 -0700 (PDT)
Received: from samson.dc.luth.se (samson.dc.luth.se [130.240.112.30])
	by mx1.FreeBSD.org (Postfix) with ESMTP id D880243E42
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 12:27:53 -0700 (PDT)
	(envelope-from bj@dc.luth.se)
Received: from dc.luth.se (root@bompe.dc.luth.se [130.240.60.42])
	by samson.dc.luth.se (8.12.5/8.12.5) with ESMTP id g7IJRgrd026749;
	Sun, 18 Aug 2002 21:27:42 +0200 (MET DST)
Received: from bompe.dc.luth.se (bj@localhost.dc.luth.se [127.0.0.1])
	by dc.luth.se (8.11.3/8.11.3) with ESMTP id g7IJRfB73831;
	Sun, 18 Aug 2002 21:27:41 +0200 (CEST)
	(envelope-from bj@bompe.dc.luth.se)
Message-Id: <200208181927.g7IJRfB73831@dc.luth.se>
X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: mobile@FreeBSD.ORG, fscked@pacbell.net
Subject: Re: 802.11b antennas 
In-reply-to: Your message of Sun, 18 Aug 2002 13:14:51 MDT.
             <20020818.131451.51626124.imp@bsdimp.com> 
Dcc: 
Reply-To: bj@dc.luth.se
X-Disposition-notification-to: Borje.Josefsson@dc.luth.se
X-uri: http://www.dc.luth.se/~bj/index.html
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Date: Sun, 18 Aug 2002 21:27:41 +0200
From: Borje Josefsson <bj@dc.luth.se>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Sun, 18 Aug 2002 13:14:51 MDT "M. Warner Losh" wrote:

> In message: <3D5FD938.19F2D00E@pacbell.net>
>             richard childers <fscked@pacbell.net> writes:
> : offer 2.4 GHz antenna boosters (PN 174748, 179872), a high-gain
> : directional antenna (or is that redundant? - PN 174721), and
> : something called a '2.4 GHz SMA RF Antenna' (PN 179864) that looks
> : like it might fit onto some of the WAPs I've seen (but I'm not sure
> : what 'SMA' refers to).
> =

> SMA is a type of connector.  Often times you'll see SMA or N in the
> product description to tell you the connector you need to connect to.
> The booster may be anything from a simple omni antenna to an
> amplifier.

Does anybody know what the "micro" connector on the tip of the Lucent =

(Orinoco) 802.11 cards are called? I was thinkg of getting a <whatever> t=
o =

N connector cable to be able to hook up a directional antenna.

--Borje



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 13:16: 8 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 8F2FF37B400
	for <FreeBSD-mobile@FreeBSD.org>; Sun, 18 Aug 2002 13:16:03 -0700 (PDT)
Received: from mail.lambertfam.org (www.lambertfam.org [216.223.196.6])
	by mx1.FreeBSD.org (Postfix) with ESMTP id E21F643E65
	for <FreeBSD-mobile@FreeBSD.org>; Sun, 18 Aug 2002 13:16:02 -0700 (PDT)
	(envelope-from lambert@lambertfam.org)
Received: from localhost.localdomain (localhost [127.0.0.1])
	by localhost.inch.com (Postfix) with ESMTP id 2BF623519F
	for <FreeBSD-mobile@FreeBSD.org>; Sun, 18 Aug 2002 16:12:32 -0400 (EDT)
Received: from laptop.lambertfam.org (unknown [10.1.0.2])
	by mail.lambertfam.org (Postfix) with ESMTP id 6D831351A2
	for <FreeBSD-mobile@FreeBSD.org>; Sun, 18 Aug 2002 16:12:24 -0400 (EDT)
Received: by laptop.lambertfam.org (Postfix, from userid 1000)
	id 7D25628B09; Sun, 18 Aug 2002 16:15:49 -0400 (EDT)
Date: Sun, 18 Aug 2002 16:15:49 -0400
From: Scott Lambert <lambert@lambertfam.org>
To: FreeBSD-mobile@FreeBSD.org
Subject: wi card insertion and xmms machine-gunning
Message-ID: <20020818201549.GA3085@laptop.lambertfam.org>
Reply-To: FreeBSD-mobile@FreeBSD.org
Mail-Followup-To: FreeBSD-mobile@FreeBSD.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.4i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I don't know that I've every played with my Netgear MA401 wi card and
xmms at the same time before.  I did so this afternoon and noticed that
xmms audio output "machine-gunned" twice, each less than a second,
during insertion.  I initially thought it was just the interaction
between the pccard beeps and the music.  However, I then fired up
dstumbler and it "machine-gunned" for a fraction of a second, about once
per second while dstumbler was running.  So I went looking and the it
appears the whole machine pauses once per second while dstumbler does
whatever it does with the wi card.

The pause, and associated "machine-gunning", on removal of the card is
between two and six seconds long.

I haven't noticed any machine pausing before.

This doesn't seem to happen as often with my Orinoco Silver, but it does
happen, especially at removal and when dstumbler starts and stops.

I haven't used the wi cards in a couple of weeks.

Below is dmesg from my attemped use of the cards this afternoon.

pcic1: Event mask 0x6
pcic1: Autodetected 5.0V card
pcic1: Event mask 0x8
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is ff
pcic1: reset 2 int is 70 stat is cd
pcic1: reset 3 int is 70 stat is ed
pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:30:ab:0f:42:32
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
wi0: wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0xe
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
pcic: I/O win 0 flags 5 240-27f
wi0: detached
pccard: card removed, slot 1
pcic1: Event mask 0x6
Connection attempt to TCP ::0001:25 from ::0001:1767
pcic1: Autodetected 5.0V card
pcic1: Event mask 0x8
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is ff
pcic1: reset 2 int is 70 stat is cf
pcic1: reset 3 int is 70 stat is ef
pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 11 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:02:2d:2a:25:37
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 7.28.01
wi0: wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0xe
pcic1: Event mask 0x6
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
pcic: I/O win 0 flags 5 240-27f
wi0: detached
pccard: card removed, slot 1
Connection attempt to TCP ::0001:25 from ::0001:1773
pcic1: Event mask 0x6
pcic1: Autodetected 5.0V card
pcic1: Event mask 0x8
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is ff
pcic1: reset 2 int is 70 stat is cd
pcic1: reset 3 int is 70 stat is ed
pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:30:ab:0f:42:32
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
wi0: wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0xe
wi0: timeout in wi_seek to 124/0; last status ffff
wi0: timeout in wi_seek to 124/44; last status ffff
wi0: wi_cmd: busy bit won't clear.
wi0: xmit failed
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
pcic: I/O win 0 flags 5 240-27f
wi0: detached
pccard: card removed, slot 1

I last upgraded Friday, Aug 16:

Starting update: Fri Aug 16 21:31:50 EDT 2002
Finished update: Fri Aug 16 21:38:57 EDT 2002
Starting buildworld: Fri Aug 16 21:38:57 EDT 2002
Finished buildworld: Fri Aug 16 22:41:27 EDT 2002
Starting buildkernel GENERIC: Fri Aug 16 22:41:27 EDT 2002
Finished buildkernel GENERIC: Fri Aug 16 22:54:01 EDT 2002
Starting buildkernel LAPTOP: Fri Aug 16 22:54:01 EDT 2002
Finished buildkernel LAPTOP: Fri Aug 16 23:05:06 EDT 2002
Starting installkernel: Fri Aug 16 23:05:06 EDT 2002
Finished installkernel: Fri Aug 16 23:05:30 EDT 2002
Starting installworld: Fri Aug 16 23:05:30 EDT 2002
Finished installworld: Fri Aug 16 23:11:46 EDT 2002

-- 
Scott Lambert                    KC5MLE                       Unix SysAdmin
lambert@lambertfam.org      

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 14:20:50 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id EBCA437B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 14:20:47 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id DD75B43E65
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 14:20:46 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7ILKZFl003849;
	Sun, 18 Aug 2002 15:20:37 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 13:21:19 -0600 (MDT)
Message-Id: <20020818.132119.116629849.imp@bsdimp.com>
To: bj@dc.luth.se
Cc: mobile@FreeBSD.ORG, fscked@pacbell.net
Subject: Re: 802.11b antennas 
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <200208181927.g7IJRfB73831@dc.luth.se>
References: <20020818.131451.51626124.imp@bsdimp.com>
	<200208181927.g7IJRfB73831@dc.luth.se>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <200208181927.g7IJRfB73831@dc.luth.se>
            Borje Josefsson <bj@dc.luth.se> writes:
: Does anybody know what the "micro" connector on the tip of the Lucent 
: (Orinoco) 802.11 cards are called? I was thinkg of getting a <whatever> to 
: N connector cable to be able to hook up a directional antenna.

It is proprietary.  You need to get a "lucent pigtail" which also
sells under other names.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 15:39:56 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 6FF8437B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 15:39:55 -0700 (PDT)
Received: from rip.psg.com (rip.psg.com [147.28.0.39])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 2E85D43E77
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 15:39:55 -0700 (PDT)
	(envelope-from randy@psg.com)
Received: from localhost ([127.0.0.1] helo=rip.psg.com.psg.com)
	by rip.psg.com with esmtp (Exim 4.10)
	id 17gYi6-0002Kp-00; Sun, 18 Aug 2002 15:39:50 -0700
From: Randy Bush <randy@psg.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: bj@dc.luth.se, mobile@FreeBSD.ORG, fscked@pacbell.net
Subject: Re: 802.11b antennas 
References: <20020818.131451.51626124.imp@bsdimp.com>
	<200208181927.g7IJRfB73831@dc.luth.se>
	<20020818.132119.116629849.imp@bsdimp.com>
Message-Id: <E17gYi6-0002Kp-00@rip.psg.com>
Date: Sun, 18 Aug 2002 15:39:50 -0700
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

>: Does anybody know what the "micro" connector on the tip of the Lucent 
>: (Orinoco) 802.11 cards are called? I was thinkg of getting a <whatever> to 
>: N connector cable to be able to hook up a directional antenna.
> It is proprietary.  You need to get a "lucent pigtail" which also
> sells under other names.

http://www.hyperlinktech.com/web/connectors_mc_card.html


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 16:10:23 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 929D337B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 16:10:22 -0700 (PDT)
Received: from itworks.com.au (dsl-210-15-243-22.Melbourne.netspace.net.au [210.15.243.22])
	by mx1.FreeBSD.org (Postfix) with SMTP id 0E7EE43E6A
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 16:10:21 -0700 (PDT)
	(envelope-from gavin@itworks.com.au)
Received: (qmail 5263 invoked from network); 18 Aug 2002 23:09:10 -0000
Received: from unknown (HELO bugs) (192.168.1.100)
  by chip.gav.itworks.com.au with SMTP; 18 Aug 2002 23:09:10 -0000
Message-ID: <002b01c2470c$71057d40$6401a8c0@bugs>
From: "Gavin Cameron" <gavin@itworks.com.au>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: <mobile@FreeBSD.ORG>
References: <028a01c2444e$f58e0b60$6401a8c0@bugs><20020815.100500.23798930.imp@bsdimp.com><075b01c246a6$15c199c0$6401a8c0@bugs> <20020818.103816.01051524.imp@bsdimp.com>
Subject: Re: Latest wi0 crashes with stable
Date: Mon, 19 Aug 2002 09:10:27 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

> : > 
> : > Are you bridging, and if so how?
> : > 
> : Nope... no bridging.
> 
> OK.  You aren't by chance running dhclient on the wi0 interface are
> you?
> 

Nope. At the moment I'm running pppoed on the interface. Previously
I was just doing standard routing with WEP enabled. Both the standard
routing and pppoed show the same symptoms.

Cheers
Gavin


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 18:38: 2 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A758737B400
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 18:38:00 -0700 (PDT)
Received: from quack.kfu.com (adsl-67-113-12-90.dsl.snfc21.pacbell.net [67.113.12.90])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 03CD743E6E
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 18:38:00 -0700 (PDT)
	(envelope-from nsayer@quack.kfu.com)
Received: from icarus.kfu.com (icarus.kfu.com [IPv6:3ffe:1200:301b:2:230:abff:fe06:62e5])
	by quack.kfu.com (8.12.3/8.12.3) with ESMTP id g7J1btkb085813
	(version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=OK);
	Sun, 18 Aug 2002 18:37:56 -0700 (PDT)
	(envelope-from nsayer@quack.kfu.com)
Received: from quack.kfu.com (localhost [127.0.0.1])
	by icarus.kfu.com (8.12.5/8.12.5) with ESMTP id g7J1boA3004335;
	Sun, 18 Aug 2002 18:37:50 -0700 (PDT)
	(envelope-from nsayer@quack.kfu.com)
Message-ID: <3D604BEE.30807@quack.kfu.com>
Date: Sun, 18 Aug 2002 18:37:50 -0700
From: Nick Sayer <nsayer@quack.kfu.com>
User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.1b) Gecko/20020727
X-Accept-Language: en, en-US, en-GB
MIME-Version: 1.0
To: "Alan B. Clegg" <alan-dated-1029976059.f0eb65@clegg.com>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: HostAP on a WMP11 -- firmware 1.4.9
References: <20020815233457.GA15916@jade.nat.elsasser.org> <20020815.230724.97148444.imp@bsdimp.com> <20020816223311.GB27286@jade.nat.elsasser.org> <20020816202739.C38532@shazam.wetworks.org>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Turns out that with 1.4.9 on my WMP11, HostAP mode was very unreliable 
under heavy loads. I've gone back to using an MA401 for now.


Alan B. Clegg wrote:
> LINKSYS WMP11 firmware update:
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 19:38:31 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1214B37B400
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 19:38:29 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id D496243E70
	for <mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 19:38:27 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7J2cQFl007841;
	Sun, 18 Aug 2002 20:38:26 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Sun, 18 Aug 2002 17:58:08 -0600 (MDT)
Message-Id: <20020818.175808.07018346.imp@bsdimp.com>
To: gavin@itworks.com.au
Cc: mobile@FreeBSD.ORG
Subject: Re: Latest wi0 crashes with stable
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <002b01c2470c$71057d40$6401a8c0@bugs>
References: <075b01c246a6$15c199c0$6401a8c0@bugs>
	<20020818.103816.01051524.imp@bsdimp.com>
	<002b01c2470c$71057d40$6401a8c0@bugs>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <002b01c2470c$71057d40$6401a8c0@bugs>
            "Gavin Cameron" <gavin@itworks.com.au> writes:
: > : > 
: > : > Are you bridging, and if so how?
: > : > 
: > : Nope... no bridging.
: > 
: > OK.  You aren't by chance running dhclient on the wi0 interface are
: > you?
: > 
: 
: Nope. At the moment I'm running pppoed on the interface. Previously
: I was just doing standard routing with WEP enabled. Both the standard
: routing and pppoed show the same symptoms.

Try this patch to see if this is what busted things.

Again, to summarize: You are using hostap mode, but not bridging,
right?

Index: if_wi.c
===================================================================
RCS file: /cache/ncvs/src/sys/dev/wi/if_wi.c,v
retrieving revision 1.103.2.2
diff -u -r1.103.2.2 if_wi.c
--- if_wi.c	2 Aug 2002 07:11:34 -0000	1.103.2.2
+++ if_wi.c	18 Aug 2002 23:56:48 -0000
@@ -1660,16 +1660,13 @@
 		 * wi_init() by just setting PROMISC in the hardware.
 		 */
 		if (ifp->if_flags & IFF_UP) {
-			if (sc->wi_ptype != WI_PORTTYPE_AP &&
-			    ifp->if_flags & IFF_RUNNING) {
+			if (ifp->if_flags & IFF_RUNNING) {
 				if (ifp->if_flags & IFF_PROMISC &&
 				    !(sc->wi_if_flags & IFF_PROMISC)) {
 					WI_SETVAL(WI_RID_PROMISC, 1);
 				} else if (!(ifp->if_flags & IFF_PROMISC) &&
 				    sc->wi_if_flags & IFF_PROMISC) {
 					WI_SETVAL(WI_RID_PROMISC, 0);
-				} else {
-					wi_init(sc);
 				}
 			} else {
 				wi_init(sc);
@@ -2094,7 +2091,7 @@
 	 *      and always reset promisc mode in Host-AP regime,
 	 *      it shows us all the packets anyway.
 	 */
-	if (sc->wi_ptype != WI_PORTTYPE_AP && ifp->if_flags & IFF_PROMISC)
+	if (/* sc->wi_ptype != WI_PORTTYPE_AP && */ ifp->if_flags & IFF_PROMISC)
 		WI_SETVAL(WI_RID_PROMISC, 1);
 	else
 		WI_SETVAL(WI_RID_PROMISC, 0);

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 18 20: 4:45 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A5CD537B400
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 20:04:42 -0700 (PDT)
Received: from orngca-mls02.socal.rr.com (orngca-mls02.socal.rr.com [66.75.160.17])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 376B343E65
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 20:04:42 -0700 (PDT)
	(envelope-from bruce@rhodewalt.com)
Received: from bruce (cpe-66-74-108-108.dc.rr.com [66.74.108.108])
	by orngca-mls02.socal.rr.com (8.11.4/8.11.3) with SMTP id g7J34aK21927
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 18 Aug 2002 20:04:36 -0700 (PDT)
From: "Bruce Rhodewalt" <bruce@rhodewalt.com>
To: <freebsd-mobile@FreeBSD.ORG>
Subject: packet size
Date: Sun, 18 Aug 2002 20:04:09 -0700
Message-ID: <BIEJJAAKCJCMJKKDLIFIGEMFDNAA.bruce@rhodewalt.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I get timeouts from my Linksys WMP11 when copying files larger than around
100KB.  I am testing using WebDAV and Samba, from two different Windows
systems (98 and 2k); these systems are connected to the LAN both wireless
(via BEFW11S4) and wired.  To produce the errors, I must use the wi0
interface on the FreeBSD system, but no other factors seem to be involved.

I get the following console error:
wi0: oversized packet received

Thanks for any ideas.  See settings below.

Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672

NIC serial number:                      [ 0123456789   ]
Station name:                           [ hairspray ]
SSID for IBSS creation:                 [ FreeBSD IBSS ]
Current netname (SSID):                 [ linksys ]
Desired netname (SSID):                 [  ]
Current BSSID:                          [ 00:04:5a:cf:e9:6b ]
Channel list:                           [ 2047 ]
IBSS channel:                           [ 6 ]
Current channel:                        [ 6 ]
Comms quality/signal/noise:             [ 92 154 0 ]
Promiscuous mode:                       [ Off ]
Port type (1=BSS, 3=ad-hoc):            [ 1 ]
MAC address:                            [ 00:06:25:a8:03:72 ]
TX rate (selection):                    [ 3 ]
TX rate (actual speed):                 [ 11 ]
RTS/CTS handshake threshold:            [ 2347 ]
Create IBSS:                            [ Off ]
Access point density:                   [ 1 ]
Power Mgmt (1=on, 0=off):               [ 0 ]
Max sleep time:                         [ 100 ]
WEP encryption:                         [ Off ]
TX encryption key:                      [ 1 ]
Encryption keys:                        [  ][  ][  ][  ]

wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.12 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::206:25ff:fea8:372%wi0 prefixlen 64 scopeid 0x1
        ether 00:06:25:a8:03:72
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
        status: associated
        ssid linksys 1:""
        stationname hairspray
        channel 6 authmode OPEN powersavemode OFF powersavesleep 100
        wepmode OFF weptxkey 1
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:04:e2:20:97:70
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000

Note: wi0 and rl0 (the NIC) have never both been mapped to TCP/IP at any one
time.  That is, the IP address 192.168.1.12 is the only one in use on this
machine.  When I test over the wired connection, wi0 is not mapped to any IP
address, but rl0 uses 192.168.1.12.

FreeBSD hairspray 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12
GMT 20
02     murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC  i386



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19  3:27:23 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 38F8537B400
	for <mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 03:27:22 -0700 (PDT)
Received: from itworks.com.au (dsl-210-15-242-147.Melbourne.netspace.net.au [210.15.242.147])
	by mx1.FreeBSD.org (Postfix) with SMTP id 96DAA43E6A
	for <mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 03:27:20 -0700 (PDT)
	(envelope-from gavin@itworks.com.au)
Received: (qmail 477 invoked from network); 19 Aug 2002 10:26:08 -0000
Received: from unknown (HELO bugs) (192.168.1.100)
  by chip.gav.itworks.com.au with SMTP; 19 Aug 2002 10:26:08 -0000
Message-ID: <00c001c2476b$052af7d0$6401a8c0@bugs>
From: "Gavin Cameron" <gavin@itworks.com.au>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: <mobile@FreeBSD.ORG>
References: <075b01c246a6$15c199c0$6401a8c0@bugs><20020818.103816.01051524.imp@bsdimp.com><002b01c2470c$71057d40$6401a8c0@bugs> <20020818.175808.07018346.imp@bsdimp.com>
Subject: Re: Latest wi0 crashes with stable
Date: Mon, 19 Aug 2002 20:27:29 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

> 
> Try this patch to see if this is what busted things.

Nope... the interface dies just as it does in -stable.

> 
> Again, to summarize: You are using hostap mode, but not bridging,
> right?
> 

Yep.

[Patchus deletus]

Gavin

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19  5:23:10 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id EBCDB37B407
	for <freebsd-mobile@FreeBSD.org>; Mon, 19 Aug 2002 05:23:07 -0700 (PDT)
Received: from axl.seasidesoftware.co.za (axl.seasidesoftware.co.za [196.31.7.201])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 31D9743E3B
	for <freebsd-mobile@FreeBSD.org>; Mon, 19 Aug 2002 05:23:06 -0700 (PDT)
	(envelope-from sheldonh@starjuice.net)
Received: from sheldonh by axl.seasidesoftware.co.za with local (Exim 4.10)
	id 17glYj-000IW9-00
	for freebsd-mobile@FreeBSD.org; Mon, 19 Aug 2002 14:23:01 +0200
Date: Mon, 19 Aug 2002 14:23:01 +0200
From: Sheldon Hearn <sheldonh@starjuice.net>
To: freebsd-mobile@FreeBSD.org
Subject: Choosing a PCMCIA modem for NEWCARD
Message-ID: <20020819122301.GD70479@starjuice.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hi folks,

I'm having trouble figuring out how to choose a supported PCMCIA modem
for -CURRENT's NEWCARD.

First, am I doing things properly?  I have this in my kernel config

	device	cbb
	device	pccard
	device cardbus

and this in /boot/loader.conf:

	hw.cardbus.debug="1"
	hw.cardbus.cis_debug="1"
	hw.pccard.debug="1"
	hw.pccard.cis_debug="1"
	hw.cbb.debug="1"

With nothing plugged into this Compaq Presario 2712EA's cardbus slot, I
get this from dmesg:

pccbb0: <TI1410 PCI-CardBus Bridge> irq 11 at device 6.0 on pci2
pccbb0: PCI Memory allocated: d0200000
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: card inserted: event=0x00000000, state=00000000
pccbb0: Unsupported card type detected

Looks suspect already. :-)

I tried inserting a Xircom 32bit CardBus CME56WG, and got no kernel
messages at all.  Adding the device/vendor ID of the device to sio_pci.c
(on the recommendation of someone on IRC) didn't help.

So am I on the right track?  When I insert a supported device, should I
expect to see kernel messages from cardbus0?

And if so, has anyone got any recommendations for a decent device,
preferably one that offers a real sio device and not some WinModem junk?
My local wholesaler has a 3CXM756 on offer, but won't let me try before
I buy. :-)

Ciao,
Sheldon.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19  9:52:27 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 0813137B400
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 09:52:23 -0700 (PDT)
Received: from samson.dc.luth.se (samson.dc.luth.se [130.240.112.30])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 68D3B43E75
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 09:52:21 -0700 (PDT)
	(envelope-from bj@dc.luth.se)
Received: from dc.luth.se (root@bompe.dc.luth.se [130.240.60.42])
	by samson.dc.luth.se (8.12.5/8.12.5) with ESMTP id g7JGqJrd021025
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 18:52:19 +0200 (MET DST)
Received: from bompe.dc.luth.se (bj@localhost.dc.luth.se [127.0.0.1])
	by dc.luth.se (8.11.3/8.11.3) with ESMTP id g7JGqJB76999
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 18:52:19 +0200 (CEST)
	(envelope-from bj@bompe.dc.luth.se)
Message-Id: <200208191652.g7JGqJB76999@dc.luth.se>
X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4
To: freebsd-mobile@FreeBSD.ORG
Reply-To: bj@dc.luth.se
X-Disposition-notification-to: Borje.Josefsson@dc.luth.se
X-Return-receipt-to: Borje.Josefsson@dc.luth.se
Dcc: 
Subject: Nokia D211 GSM/HSCD/GPRS/802.11 multifunction card
From: Borje Josefsson <bj@dc.luth.se>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Date: Mon, 19 Aug 2002 18:52:19 +0200
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


Hello,

Has anybody got the Nokia D211 multifunction card to work with FreeBSD? =

The card is a combined cell phone (with GSM/HSCD/GPRS) and 802.11.
  http://www.nokia.com/phones/nokiad211/specifications.html

I am at first intrerested in getting the GPRS functions to work. Entering=
 =

the card as a serial device (as in generic PCMCIA MODEM, which works with=
 =

Nokia's other card phones) in pccard.conf and then tryping to connect wit=
h =

"tip" brings my system (4.6R) to a complete lockup. Nokia claims that the=
 =

card is supported under Linux.

The output from "pccardc dumpcis" is attached below. Any ideas on how to =

configure this beast??

With kind regards,

--Borje

Configuration data for card in slot 0
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 3
    000:  00 00 ff
	Common memory device information:
		Device number 1, type No device, WPS =3D OFF
		Speed =3D No speed, Memory block size =3D 512b, 1 units
Tuple #2, code =3D 0x15 (Version 1 info), length =3D 14
    000:  07 00 4e 6f 6b 69 61 00 44 32 31 31 00 ff
	Version =3D 7.0, Manuf =3D [Nokia], card vers =3D [D211]
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
    000:  24 01 20 11
	PCMCIA ID =3D 0x124, OEM ID =3D 0x1120
Tuple #4, code =3D 0x21 (Functional ID), length =3D 2
    000:  06 00
	Network/LAN adapter
Tuple #5, code =3D 0x22 (Functional EXT), length =3D 2
    000:  01 07
	Network technology: Wireless
Tuple #6, code =3D 0x22 (Functional EXT), length =3D 5
    000:  02 c0 d8 a7 00
	Network speed: 11 Mb/sec
Tuple #7, code =3D 0x22 (Functional EXT), length =3D 2
    000:  03 07
	Network media: 2.4 GHz
Tuple #8, code =3D 0x1a (Configuration map), length =3D 4
    000:  00 01 f4 01
	Reg len =3D 1, config register addr =3D 0xf4, last config =3D 0x1
	Registers: X------- =

Tuple #9, code =3D 0x1b (Configuration entry), length =3D 19
    000:  c1 01 1e 71 55 36 c6 5a 35 01 8e 7f e5 13 5f 64
    010:  30 ff ff
	Config index =3D 0x1(default)
	Interface byte =3D 0x1 (I/O)
	Vcc pwr:
		Nominal operating supply voltage: 5 x 1V
		Max current average over 1 second: 3 x 100mA
		Max current average over 10 ms: 4 x 100mA, ext =3D 0x5a
		Power down supply current: 3 x 10mA
	Vpp pwr:
		Nominal operating supply voltage: 1.2 x 10V, ext =3D 0x7f
	Wait scale Speed =3D 1.2 x 1 us, scaled by 10
	RDY/BSY scale Speed =3D 5.0 x 10 ms, scaled by 10
	Card decodes 4 address lines, full 8/16 Bit I/O
		IRQ modes: Level
		IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #10, code =3D 0x14 (No link), length =3D 0
Tuple #11, code =3D 0xff (Terminator), length =3D 0



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19 10:57:34 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 76CCC37B400
	for <mobile@freebsd.org>; Mon, 19 Aug 2002 10:57:33 -0700 (PDT)
Received: from cs.bu.edu (cs.bu.edu [128.197.12.2])
	by mx1.FreeBSD.org (Postfix) with ESMTP id E8E7643E3B
	for <mobile@freebsd.org>; Mon, 19 Aug 2002 10:57:32 -0700 (PDT)
	(envelope-from evms@cs.bu.edu)
Received: from csa.bu.edu (evms@csa [128.197.12.3])
	by cs.bu.edu (8.12.2/8.12.2) with ESMTP id g7JHvVPq008584
	for <mobile@freebsd.org>; Mon, 19 Aug 2002 13:57:31 -0400 (EDT)
Received: (from evms@localhost)
	by csa.bu.edu (8.10.1/8.10.1) id g7JHvSQ09069;
	Mon, 19 Aug 2002 13:57:28 -0400 (EDT)
Date: Mon, 19 Aug 2002 13:57:28 -0400 (EDT)
Message-Id: <200208191757.g7JHvSQ09069@csa.bu.edu>
From: Evan Sarmiento <evms@cs.bu.edu>
To: mobile@freebsd.org
Subject: Orinoco PCI->PCMCIA
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hello,

I was curious if the Orinoco PCI->PCMCIA card is supported. I've
seen that the ISA variant is, but I'm not sure about the PCI
one. So far it appears as an unknown card in dmesg.

- Evan


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19 11:37:35 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 3B30C37B400
	for <Freebsd-mobile@freebsd.org>; Mon, 19 Aug 2002 11:37:29 -0700 (PDT)
Received: from web13205.mail.yahoo.com (web13205.mail.yahoo.com [216.136.174.190])
	by mx1.FreeBSD.org (Postfix) with SMTP id EB4CD43E42
	for <Freebsd-mobile@freebsd.org>; Mon, 19 Aug 2002 11:37:28 -0700 (PDT)
	(envelope-from volswagn@yahoo.com)
Message-ID: <20020819183728.91449.qmail@web13205.mail.yahoo.com>
Received: from [66.105.142.142] by web13205.mail.yahoo.com via HTTP; Mon, 19 Aug 2002 11:37:28 PDT
Date: Mon, 19 Aug 2002 11:37:28 -0700 (PDT)
From: Aaron Clow <volswagn@yahoo.com>
Subject: ACPI causes stutters in Maestro3 playback on Inspiron4000
To: Freebsd-mobile@freebsd.org
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="0-889623176-1029782248=:90694"
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

--0-889623176-1029782248=:90694
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Any ideas why my MP3's stutter constantly now unless I
disable the ACPI module in -CURRENT?

Looks like I have plenty of system resources available, so
it's not that... Maybe something with interrupts?

Thanks...


__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
--0-889623176-1029782248=:90694
Content-Type: text/plain; name="dmesg.txt"
Content-Description: dmesg.txt
Content-Disposition: inline; filename="dmesg.txt"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #7: Fri Aug 16 12:12:49 EDT 2002
    root@DAEMON.FalconStor.Net:/usr/obj/usr/src/sys/DAEMON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc042c000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc042c0a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc042c15c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc042c208.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 701594325 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268353536 (262064K bytes)
avail memory = 255815680 (249820K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fbd80
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   CPi R  > on motherboard
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 3.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 3.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xfbffe000-0xfbffffff irq 5 at device 8.0 on pci0
xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xfbffd800-0xfbffd87f,0xfbffdc00-0xfbffdc7f irq 11 at device 16.0 on pci0
xl0: Ethernet address: 00:01:03:85:8c:38
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xd3800-0xd3fff,0xd3000-0xd37ff,0xd2800-0xd2fff,0xd2000-0xd27ff,0xd1800-0xd1fff,0xd1000-0xd17ff,0xd0800-0xd0fff,0xd0000-0xd07ff,0xc0000-0xcffff on isa0
pcic0 at port 0x3e0 iomem 0xa0000-0xa1fff irq 10 on isa0
pcic_attach: attach found no sockets
device_probe_and_attach: pcic0 attach returned 6
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
acd0: CDROM <TEAC CD-ROM CD-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a

--0-889623176-1029782248=:90694--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 19 23:15:24 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1B0E037B400
	for <mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 23:15:22 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 2936043E3B
	for <mobile@FreeBSD.ORG>; Mon, 19 Aug 2002 23:15:21 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7K6FHFl014811;
	Tue, 20 Aug 2002 00:15:19 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 00:56:07 -0600 (MDT)
Message-Id: <20020820.005607.81895842.imp@bsdimp.com>
To: gavin@itworks.com.au
Cc: mobile@FreeBSD.ORG
Subject: Re: Latest wi0 crashes with stable
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <00c001c2476b$052af7d0$6401a8c0@bugs>
References: <002b01c2470c$71057d40$6401a8c0@bugs>
	<20020818.175808.07018346.imp@bsdimp.com>
	<00c001c2476b$052af7d0$6401a8c0@bugs>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

OK.  I've managed to recreate this with 1.3.4 firmware w/o wep or
anything weird.

The only strange thing that I'm doing is that I have a marginal
signal.

Oh, and two point to point links that are on different channels that
might be confisuing things.

What does dstumbler say?  Any APs in the area that might be
intererring?  How about point to point links?  Any coreless phones in
2.4GHz range?  See any coffee cans mounted on poles pointed in your
general direction?

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  7:55: 7 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id BFE0337B400; Tue, 20 Aug 2002 07:54:38 -0700 (PDT)
Received: from ns.altadena.net (ns.altadena.net [206.126.144.2])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 0739743E3B; Tue, 20 Aug 2002 07:54:38 -0700 (PDT)
	(envelope-from pete@ns.altadena.net)
Received: from ns.altadena.net (localhost [127.0.0.1])
	by ns.altadena.net (8.12.3/8.12.3) with ESMTP id g7KEsbQO019935;
	Tue, 20 Aug 2002 07:54:37 -0700 (PDT)
	(envelope-from pete@ns.altadena.net)
Received: (from pete@localhost)
	by ns.altadena.net (8.12.3/8.12.3/Submit) id g7KEsbD9019934;
	Tue, 20 Aug 2002 07:54:37 -0700 (PDT)
	(envelope-from pete)
From: Pete Carah <pete@ns.altadena.net>
Message-Id: <200208201454.g7KEsbD9019934@ns.altadena.net>
Subject: VAIO R505ES better, but...
To: mobile@freebsd.org, current@freebsd.org
Date: Tue, 20 Aug 2002 07:54:37 -0700 (PDT)
X-Mailer: ELM [version 2.4ME+ PL68 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=iso8859-1
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Well, now it boots (presumably thanks to IRQ fixes for TI bridges...)

Now it doesn't spot *any* devices on pc-card or the built-in wi0;
also the mouse gets lost ("psm0: unable to allocate IRQ").

The Memory-stick does work (with a manual camcontrol rescan).
(there are plenty of complaints from booting with no card present,
but it works right once I plug one in.  

Firewire driver not yet present (I know about the patch and will
likely try it when I get time.)  

I'm mostly concerned with the newcard not seeing *any* cards or card-like
objects (e.g. the built-in orinoco).  Stable sees the orinoco but won't
use it due to lack of a properly-mapped IRQ.  My zoom modem card
was also plugged in for this boot and not spotted...

Another nit for whoever handles ACPI:
If I do "shutdown -p now", the system powers down apparently properly,
but when I try to power back up it locks up in a state with the power 
and battery light both on and nothing else running.  Thank heavens for a 
good supply of paper clips :-)  "shutdown -h now" and powering off
with the button works fine.

-- Pete

verbose DMESG follows
---------------------------------------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Tue Aug 20 05:54:23 PDT 2002
    pete@port2.altadena.net:/d/obj-s/current/usr/src/sys/PORT2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc043e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043e0a8.
Calibrating clock(s) ... TSC clock: 1193121752 Hz, i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 1193107642 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 266862592 (260608K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00465000 - 0x0fceffff, 260616192 bytes (63627 pages)
0x0fd00000 - 0x0fe77fff, 1540096 bytes (376 pages)
avail memory = 253870080 (247920K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6ba0
bios32: Entry = 0xfd871 (c00fd871)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd870+0x13a
pnpbios: Found PnP BIOS data at 0xc00f6bd0
pnpbios: Entry = f0000:880c  Rev = 1.0
Other BIOS signatures found:
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=35758086)
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY   C1      > on motherboard
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 2
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
	map[10]: type 3, range 32, base 00000000, size  0, enabled
found->	vendor=0x8086, dev=0x3575, revid=0x04
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	map[10]: type 3, range 32, base e8000000, size 27, enabled
	map[14]: type 1, range 32, base e0000000, size 19, enabled
found->	vendor=0x8086, dev=0x3577, revid=0x04
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	intpin=a, irq=9
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type 3, range 32, base f0000000, size 27, enabled
	map[14]: type 1, range 32, base e0080000, size 19, enabled
found->	vendor=0x8086, dev=0x3577, revid=0x00
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	powerspec 1  supports D0 D1 D3  current D0
	map[20]: type 4, range 32, base 00001800, size  5, enabled
found->	vendor=0x8086, dev=0x2482, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	intpin=a, irq=9
	map[20]: type 4, range 32, base 00001820, size  5, enabled
found->	vendor=0x8086, dev=0x2484, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=9
	map[20]: type 4, range 32, base 00001840, size  5, enabled
found->	vendor=0x8086, dev=0x2487, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	intpin=c, irq=255
found->	vendor=0x8086, dev=0x2448, revid=0x42
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
found->	vendor=0x8086, dev=0x248c, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 00001860, size  4, enabled
	map[24]: type 1, range 32, base e0100000, size 10, memory disabled
found->	vendor=0x8086, dev=0x248a, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001880, size  5, enabled
found->	vendor=0x8086, dev=0x2483, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=255
	map[10]: type 4, range 32, base 00001c00, size  8, port disabled
	map[14]: type 4, range 32, base 000018c0, size  6, enabled
found->	vendor=0x8086, dev=0x2485, revid=0x02
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=9
	map[10]: type 4, range 32, base 00002400, size  8, port disabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
found->	vendor=0x8086, dev=0x2486, revid=0x02
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	intpin=b, irq=255
pci0: <PCI bus> on acpi_pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f at device 29.2 on pci0
acpi_pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
acpi_pcib0: possible interrupts:  9
acpi_pcib0: routed interrupt 9 via \\_SB_.LNKC
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
umass0:0:0:-1: Attached to scbus0 as device 0
pcib1: <PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xe0200000-0xe02fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: physical bus=2
	map[10]: type 1, range 32, base e0205000, size 11, enabled
	map[14]: type 1, range 32, base e0200000, size 14, enabled
found->	vendor=0x104c, dev=0x8023, revid=0x00
	bus=2, slot=2, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1180, dev=0x0475, revid=0x80
	bus=2, slot=5, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e0204000, size 12, enabled
	map[14]: type 4, range 32, base 00003000, size  6, enabled
found->	vendor=0x8086, dev=0x1031, revid=0x42
	bus=2, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x104c, dev=0xac50, revid=0x01
	bus=2, slot=11, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	intpin=a, irq=255
	powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <PCI bus> on pcib1
pci1: <serial bus, FireWire> at device 2.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> irq 3 at device 5.0 on pci1
pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xe0204000-0xe0204fff irq 9 at device 8.0 on pci1
pcib1: device fxp0 requested decoded memory range 0xe0204000-0xe0204fff
fxp0: using memory space register mapping
fxp0: Ethernet address 08:00:46:4e:96:17
fxp0: PCI IDs: 8086 1031 104d 8100 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
cbb1: <TI1410 PCI-CardBus Bridge> at device 11.0 on pci1
pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb: Unable to map IRQ...
device_probe_and_attach: cbb1 attach returned 12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
eisa0: <EISA bus> on motherboard
eisa0: unknown card B@H0000 (0x08080000) at slot 1
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1 failed to probe at port 0x3e2 iomem 0xd4000 irq 11 on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: On Line
cbb0: Unsupported card type detected
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK4018GAS/Q1.02 C> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
Unretryable error
(probe0:umass-sim0:0:0:0): error 6
(probe0:umass-sim0:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x7, start 63, end = 15663374, size 15663312 : OK
ad0s2: type 0xa5, start 15663375, end = 24049304, size 8385930 : OK
ad0s3: type 0xa5, start 24049305, end = 32435234, size 8385930 : OK
ad0s4: type 0xa5, start 32435235, end = 78140159, size 45704925 : OK
start_init: trying /sbin/init
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
splash: image decoder found: snake_saver
Linux ELF exec handler installed

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  8:21:12 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 4E3E437B400
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 08:21:09 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id CE66843E3B
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 08:21:07 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7KFL6Fl016938;
	Tue, 20 Aug 2002 09:21:06 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 09:19:45 -0600 (MDT)
Message-Id: <20020820.091945.115225537.imp@bsdimp.com>
To: FreeBSD-mobile@FreeBSD.ORG, lambert@lambertfam.org
Subject: Re: wi card insertion and xmms machine-gunning
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <20020818201549.GA3085@laptop.lambertfam.org>
References: <20020818201549.GA3085@laptop.lambertfam.org>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <20020818201549.GA3085@laptop.lambertfam.org>
            Scott Lambert <lambert@lambertfam.org> writes:
: The pause, and associated "machine-gunning", on removal of the card is
: between two and six seconds long.

The driver busy waits for some things.  Sometimes these waits can be
rather long, which causes problems for other aps.  I'd expect it to be
especially bad if you were ejecting the card because we take a long
time to timeout in that case.  I have a fix for that, but for the
insertion problem, init takes a while and you'll notice a rather long
delay in character echo in X when you insert a card often.  Some cards
respond more quickly than others....

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  8:23:53 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 9A63E37B400
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 08:23:51 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id D12DF43E65
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 08:23:50 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7KFNkFl016954;
	Tue, 20 Aug 2002 09:23:46 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 09:22:26 -0600 (MDT)
Message-Id: <20020820.092226.28858516.imp@bsdimp.com>
To: evms@cs.bu.edu
Cc: mobile@FreeBSD.ORG
Subject: Re: Orinoco PCI->PCMCIA
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <200208191757.g7JHvSQ09069@csa.bu.edu>
References: <200208191757.g7JHvSQ09069@csa.bu.edu>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <200208191757.g7JHvSQ09069@csa.bu.edu>
            Evan Sarmiento <evms@cs.bu.edu> writes:
: I was curious if the Orinoco PCI->PCMCIA card is supported. I've
: seen that the ISA variant is, but I'm not sure about the PCI
: one. So far it appears as an unknown card in dmesg.

What version of FreeBSD do you have?  Since about 4.5 the PCI
PCMCIA/CardBus bridges on expansion cards have been supported, as well
as a number of PLX based cards going back even further.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  8:25:44 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id AB50537B400; Tue, 20 Aug 2002 08:25:40 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id E568443E72; Tue, 20 Aug 2002 08:25:39 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7KFPcFl016982;
	Tue, 20 Aug 2002 09:25:39 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 09:24:19 -0600 (MDT)
Message-Id: <20020820.092419.59582832.imp@bsdimp.com>
To: pete@ns.altadena.net
Cc: mobile@FreeBSD.ORG, current@FreeBSD.ORG
Subject: Re: VAIO R505ES better, but...
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <200208201454.g7KEsbD9019934@ns.altadena.net>
References: <200208201454.g7KEsbD9019934@ns.altadena.net>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <200208201454.g7KEsbD9019934@ns.altadena.net>
            Pete Carah <pete@ns.altadena.net> writes:
: I'm mostly concerned with the newcard not seeing *any* cards or card-like
: objects (e.g. the built-in orinoco).  Stable sees the orinoco but won't
: use it due to lack of a properly-mapped IRQ.  My zoom modem card
: was also plugged in for this boot and not spotted...
...
: cbb1: <TI1410 PCI-CardBus Bridge> at device 11.0 on pci1
: pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff
: cardbus1: <CardBus bus> on cbb1
: pccard1: <16-bit PCCard bus> on cbb1
: cbb: Unable to map IRQ...
: device_probe_and_attach: cbb1 attach returned 12
...
: acpi_cpu0: set speed to 100.0%
: acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
: acpi_acad0: On Line

acpi + interrupt routing doesn't work.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  9:34:16 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 4FE4337B400
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 09:34:14 -0700 (PDT)
Received: from itworks.com.au (dsl-210-15-242-157.Melbourne.netspace.net.au [210.15.242.157])
	by mx1.FreeBSD.org (Postfix) with SMTP id 7A7F943E42
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 09:34:09 -0700 (PDT)
	(envelope-from gavin@itworks.com.au)
Received: (qmail 11954 invoked from network); 20 Aug 2002 16:32:46 -0000
Received: from unknown (HELO bugs) (192.168.1.100)
  by chip.gav.itworks.com.au with SMTP; 20 Aug 2002 16:32:46 -0000
Message-ID: <025501c24867$67799d90$6401a8c0@bugs>
From: "Gavin Cameron" <gavin@itworks.com.au>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: <mobile@FreeBSD.ORG>
References: <002b01c2470c$71057d40$6401a8c0@bugs><20020818.175808.07018346.imp@bsdimp.com><00c001c2476b$052af7d0$6401a8c0@bugs> <20020820.005607.81895842.imp@bsdimp.com>
Subject: Re: Latest wi0 crashes with stable
Date: Wed, 21 Aug 2002 02:34:07 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

>
> What does dstumbler say?  Any APs in the area that might be

What's dstumbler ? How do I find this value?

> intererring?  How about point to point links?  Any coreless phones in

APs in the area... not that I know of, though I live in the CBD of a 2
million
people city... other channels seem to experience the same problem though.

> 2.4GHz range?  See any coffee cans mounted on poles pointed in your

Phones... not in my vicinity... again, different channels have the same
problem.

> general direction?

Coffee cans on poles ;-)... what have polish people got to do with this
apart from being good conductors? Cheap polish and tram conductor humour ;-)

Gavin


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20  9:56:57 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 4E4CD37B400
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 09:56:51 -0700 (PDT)
Received: from samson.dc.luth.se (samson.dc.luth.se [130.240.112.30])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 149C443E75
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 09:56:49 -0700 (PDT)
	(envelope-from bj@dc.luth.se)
Received: from dc.luth.se (root@bompe.dc.luth.se [130.240.60.42])
	by samson.dc.luth.se (8.12.5/8.12.5) with ESMTP id g7KGulrd002915
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 18:56:47 +0200 (MET DST)
Received: from bompe.dc.luth.se (bj@localhost.dc.luth.se [127.0.0.1])
	by dc.luth.se (8.11.3/8.11.3) with ESMTP id g7KGuls01666
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 18:56:47 +0200 (CEST)
	(envelope-from bj@bompe.dc.luth.se)
Message-Id: <200208201656.g7KGuls01666@dc.luth.se>
X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Nokia D211 GSM/HSCD/GPRS/802.11 multifunction card 
In-reply-to: Your message of Mon, 19 Aug 2002 18:52:19 +0200.
             <200208191652.g7JGqJB76999@dc.luth.se> 
Dcc: 
Reply-To: bj@dc.luth.se
X-Disposition-notification-to: Borje.Josefsson@dc.luth.se
X-uri: http://www.dc.luth.se/~bj/index.html
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Date: Tue, 20 Aug 2002 18:56:47 +0200
From: Borje Josefsson <bj@dc.luth.se>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


Hello,

So far, I haven't got any answers - so I guess that noone has yet tried =

this card under FreeBSD, so I have made some more tests. Since I haven't =

previously delt with multifunction cards, I really don't have a clue wher=
e =

to go next. The FAQ and the handbook does not mention this. I have tried =

changning the "config" line in pccard.conf to "auto", "default", "0x1". =

All of theese give the same hangning result.

Any ideas on what to try next? I can install the card under Windows, but =

don't know what to look for there.

--B=F6rje

On Mon, 19 Aug 2002 18:52:19 +0200 Borje Josefsson wrote:

> =

> Hello,
> =

> Has anybody got the Nokia D211 multifunction card to work with FreeBSD?=
 =

> The card is a combined cell phone (with GSM/HSCD/GPRS) and 802.11.
>   http://www.nokia.com/phones/nokiad211/specifications.html
> =

> I am at first intrerested in getting the GPRS functions to work. Enteri=
ng =

> the card as a serial device (as in generic PCMCIA MODEM, which works wi=
th =

> Nokia's other card phones) in pccard.conf and then tryping to connect w=
ith =

> "tip" brings my system (4.6R) to a complete lockup. Nokia claims that t=
he =

> card is supported under Linux.
> =

> The output from "pccardc dumpcis" is attached below. Any ideas on how t=
o =

> configure this beast??
> =

> With kind regards,
> =

> --Borje
> =

> Configuration data for card in slot 0
> Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 3
>     000:  00 00 ff
> 	Common memory device information:
> 		Device number 1, type No device, WPS =3D OFF
> 		Speed =3D No speed, Memory block size =3D 512b, 1 units
> Tuple #2, code =3D 0x15 (Version 1 info), length =3D 14
>     000:  07 00 4e 6f 6b 69 61 00 44 32 31 31 00 ff
> 	Version =3D 7.0, Manuf =3D [Nokia], card vers =3D [D211]
> Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
>     000:  24 01 20 11
> 	PCMCIA ID =3D 0x124, OEM ID =3D 0x1120
> Tuple #4, code =3D 0x21 (Functional ID), length =3D 2
>     000:  06 00
> 	Network/LAN adapter
> Tuple #5, code =3D 0x22 (Functional EXT), length =3D 2
>     000:  01 07
> 	Network technology: Wireless
> Tuple #6, code =3D 0x22 (Functional EXT), length =3D 5
>     000:  02 c0 d8 a7 00
> 	Network speed: 11 Mb/sec
> Tuple #7, code =3D 0x22 (Functional EXT), length =3D 2
>     000:  03 07
> 	Network media: 2.4 GHz
> Tuple #8, code =3D 0x1a (Configuration map), length =3D 4
>     000:  00 01 f4 01
> 	Reg len =3D 1, config register addr =3D 0xf4, last config =3D 0x1
> 	Registers: X------- =

> Tuple #9, code =3D 0x1b (Configuration entry), length =3D 19
>     000:  c1 01 1e 71 55 36 c6 5a 35 01 8e 7f e5 13 5f 64
>     010:  30 ff ff
> 	Config index =3D 0x1(default)
> 	Interface byte =3D 0x1 (I/O)
> 	Vcc pwr:
> 		Nominal operating supply voltage: 5 x 1V
> 		Max current average over 1 second: 3 x 100mA
> 		Max current average over 10 ms: 4 x 100mA, ext =3D 0x5a
> 		Power down supply current: 3 x 10mA
> 	Vpp pwr:
> 		Nominal operating supply voltage: 1.2 x 10V, ext =3D 0x7f
> 	Wait scale Speed =3D 1.2 x 1 us, scaled by 10
> 	RDY/BSY scale Speed =3D 5.0 x 10 ms, scaled by 10
> 	Card decodes 4 address lines, full 8/16 Bit I/O
> 		IRQ modes: Level
> 		IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
> Tuple #10, code =3D 0x14 (No link), length =3D 0
> Tuple #11, code =3D 0xff (Terminator), length =3D 0
> =

> =

> =

> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
> =




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 10: 7:16 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CBCC337B400
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:07:13 -0700 (PDT)
Received: from quack.kfu.com (adsl-67-113-12-90.dsl.snfc21.pacbell.net [67.113.12.90])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 4CC9343E4A
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:07:13 -0700 (PDT)
	(envelope-from nsayer@kfu.com)
Received: from kfu.com (gate.cenzic.com [66.237.77.34])
	(authenticated bits=0)
	by quack.kfu.com (8.12.3/8.12.3) with ESMTP id g7KH79kb006996
	(version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=OK);
	Tue, 20 Aug 2002 10:07:12 -0700 (PDT)
	(envelope-from nsayer@kfu.com)
Message-ID: <3D6276DE.7010500@kfu.com>
Date: Tue, 20 Aug 2002 10:05:34 -0700
From: Nick Sayer <nsayer@quack.kfu.com>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.1b) Gecko/20020721
X-Accept-Language: en-us, en
MIME-Version: 1.0
To: Josh Elsasser <jre@vineyard.net>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: HostAP on a DWL-520 prism2 PCI card
References: <20020815233457.GA15916@jade.nat.elsasser.org>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Josh Elsasser wrote:

>I am having trouble setting up my prism2-based dwl-520 pci card.  The
>card is recognized when I load the if_wi driver:
>
>wi0: <Intersil Prism2.5> mem 0xeb103000-0xeb103fff irq 11 at device 14.0 on pci0
>wi0: 802.11 address: 00:05:5d:ed:af:52
>wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
>wi0: Intersil Firmware: Primary 1.00.05, Station 1.03.04
>

I could not get any host to associate with station firmware 1.03.04 (on 
a Prism 2.5 card). I upgraded to 1.04.09 and hosts were able to 
associate, but under heavy load the card would end up getting locked up, 
so I have had to drop back to a Prism 2 card for now. 1.03.04 on Prism 2 
cards (in particular, my MA401) seems to be good.



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 10: 9:55 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id BCDEF37B400
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:09:53 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B417C43E75
	for <mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:09:52 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7KH9kFl017677;
	Tue, 20 Aug 2002 11:09:46 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 09:49:41 -0600 (MDT)
Message-Id: <20020820.094941.25097040.imp@bsdimp.com>
To: gavin@itworks.com.au
Cc: mobile@FreeBSD.ORG
Subject: Re: Latest wi0 crashes with stable
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <025501c24867$67799d90$6401a8c0@bugs>
References: <00c001c2476b$052af7d0$6401a8c0@bugs>
	<20020820.005607.81895842.imp@bsdimp.com>
	<025501c24867$67799d90$6401a8c0@bugs>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <025501c24867$67799d90$6401a8c0@bugs>
            "Gavin Cameron" <gavin@itworks.com.au> writes:
: >
: > What does dstumbler say?  Any APs in the area that might be
: 
: What's dstumbler ? How do I find this value?

dstumbler is one of the bsd-airtools.  There's a port.

: > general direction?
: 
: Coffee cans on poles ;-)... what have polish people got to do with this
: apart from being good conductors? Cheap polish and tram conductor humour ;-)

Well, a common "hack" here in the US is to get a Yuban Coffee Can,
punch a hole in the middle of the B and connect an N connector with a
short copper wire (on the order of 3cm iirc).  Gives you a decent
antenna for not a lot of money, but lacks FCC certification.  Good for
listening, but less good for xmit.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 10:23:35 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 85CB537B400
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 10:23:28 -0700 (PDT)
Received: from hotmail.com (f201.pav2.hotmail.com [64.4.37.201])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 39C9A43E84
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 10:23:28 -0700 (PDT)
	(envelope-from howcanthisbe300@hotmail.com)
Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC;
	 Tue, 20 Aug 2002 10:23:27 -0700
Received: from 80.132.140.124 by pv2fd.pav2.hotmail.msn.com with HTTP;
	Tue, 20 Aug 2002 17:23:27 GMT
X-Originating-IP: [80.132.140.124]
From: "How Can ThisBe" <howcanthisbe300@hotmail.com>
To: freebsd-mobile@freebsd.org
Subject: Configuring Wacom Tablet support 
Date: Tue, 20 Aug 2002 17:23:27 +0000
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F2017cRnjynEzebm3nm00018377@hotmail.com>
X-OriginalArrivalTime: 20 Aug 2002 17:23:27.0959 (UTC) FILETIME=[4C112670:01C2486E]
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hola!

Trying to configure support on a Dell Inspiron 8100 for my USB Wacom Intuos 
tablet running on FreeBSD 4.6 stable with XFree86 4.2 from the FreeBSD ports 
collection. So far I get an error in the XFree86.0.log

<snip>The USB version of the driver isn't available for your platform</snip> 
Tail from XFree86.0.log below.

If I unplug the wacom and plug it back in again I get this message
Aug 20 19:11:21 tank /kernel: ums1: Tablet XD-0608-U, rev 1.10/1.15, addr 3, 
iclass 3/1
Aug 20 19:11:21 tank /kernel: ums1: 3 buttons and Z dir.

Any advice would be greatly appreciated.
mand
http://onemoremonkey.com

This is my XF86config
---------------------
<snip>
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
    	InputDevice "stylus" "AlwaysCore"
    	InputDevice "eraser" "AlwaysCore"
    	InputDevice "cursor" "AlwaysCore"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load "wacom"
	Load  "extmod"
	Load  "xie"
	Load  "pex5"
	Load  "glx"
	Load  "dri"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
	Option 	"Emulate3Buttons"
EndSection

Section "InputDevice"
    Identifier  "stylus"
    Driver      "wacom"
    Option      "Type" "stylus"
    Option      "Device" "/dev/uhid0"
	#Option "Suppress" "2"
	Option "Mode" "Absolute"
	Option "USB" "on"
	Option "TiltMode" "on"
	Option "HistorySize" "200"
	Option "TopX" "0"
	Option "TopY" "0"
	Option "BottomX" "1600"
	Option "BottomY" "1200"
	#Option "KeepShape"
	Option "Threshold" "-280"
EndSection

Section "InputDevice"
    Identifier  "eraser"
    Driver      "wacom"
    Option      "Type" "eraser"
    Option      "Device" "/dev/uhid0"
	Option "Mode" "Absolute"
	Option "USB" "on"
	Option "TopX" "0"
	Option "TopY" "0"
	Option "BottomY" "1200"
	Option "BottomX" "1600"
	Option "Threshold" "-280"
EndSection

Section "InputDevice"
    Identifier  "cursor"
    Driver      "wacom"
    Option      "Type" "cursor"
    Option      "Device" "/dev/uhid0"
	Option "Mode" "Absolute"
	Option "TopX" "0"
	Option "TopY" "0"
	Option "BottomY" "1200"
	Option "BottomX" "1600"
	Option "USB" "on"
EndSection
</snip>

Tail of XFree86.0.log
---------------------
<snip>

(**) Option "AlwaysCore"
(**) stylus: always reports core events
(**) Option "HistorySize" "200"
(**) stylus: has a history of 200 motions
(**) stylus serial device is /dev/uhid0
(**) stylus is in absolute mode
(**) Option "USB" "on"
The USB version of the driver isn't available for your platform
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1600"
(**) stylus: bottom x = 1600
(**) Option "BottomY" "1200"
(**) stylus: bottom x = 1200
(**) stylus: serial number = 0
(**) Option "Threshold" "-280"
(**) stylus: threshold = -280
(**) stylus: resol z = 1270
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "AlwaysCore"
(**) eraser: always reports core events
(**) eraser serial device is /dev/uhid0
(**) eraser is in absolute mode
(**) Option "USB" "on"
The USB version of the driver isn't available for your platform
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1600"
(**) eraser: bottom x = 1600
(**) Option "BottomY" "1200"
(**) eraser: bottom x = 1200
(**) eraser: serial number = 0
(**) Option "Threshold" "-280"
(**) eraser: threshold = -280
(**) eraser: resol z = 1270
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(**) Option "AlwaysCore"
(**) cursor: always reports core events
(**) cursor serial device is /dev/uhid0
(**) cursor is in absolute mode
(**) Option "USB" "on"
The USB version of the driver isn't available for your platform
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1600"
(**) cursor: bottom x = 1600
(**) Option "BottomY" "1200"
(**) cursor: bottom x = 1200
(**) cursor: serial number = 0
(**) cursor: threshold = -280
(**) cursor: resol z = 1270
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "Device" "/dev/uhid0"
(EE) xf86OpenSerial: Cannot open device /dev/uhid0
	Device not configured.
Error opening /dev/uhid0 : Invalid argument
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse
(**) Option "BaudRate" "1200"
(EE) xf86OpenSerial: Cannot open device /dev/uhid0
	Device not configured.
Error opening /dev/uhid0 : Invalid argument
</snip>



_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 10:54:34 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 7255A37B400
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:54:32 -0700 (PDT)
Received: from mail.lambertfam.org (www.lambertfam.org [216.223.196.6])
	by mx1.FreeBSD.org (Postfix) with ESMTP id EC92943E42
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 10:54:31 -0700 (PDT)
	(envelope-from lambert@lambertfam.org)
Received: from localhost.localdomain (localhost [127.0.0.1])
	by localhost.inch.com (Postfix) with ESMTP id B7BB135138
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 13:51:35 -0400 (EDT)
Received: from laptop.lambertfam.org (unknown [10.1.0.2])
	by mail.lambertfam.org (Postfix) with ESMTP id 2940A35140
	for <FreeBSD-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 13:51:33 -0400 (EDT)
Received: by laptop.lambertfam.org (Postfix, from userid 1000)
	id 8778528B09; Tue, 20 Aug 2002 13:54:26 -0400 (EDT)
Date: Tue, 20 Aug 2002 13:54:26 -0400
From: Scott Lambert <lambert@lambertfam.org>
To: FreeBSD-mobile@FreeBSD.ORG
Subject: Re: wi card insertion and xmms machine-gunning
Message-ID: <20020820175426.GA5442@laptop.lambertfam.org>
Reply-To: FreeBSD-mobile@FreeBSD.ORG
Mail-Followup-To: FreeBSD-mobile@FreeBSD.ORG
References: <20020818201549.GA3085@laptop.lambertfam.org> <20020820.091945.115225537.imp@bsdimp.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20020820.091945.115225537.imp@bsdimp.com>
User-Agent: Mutt/1.4i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Tue, Aug 20, 2002 at 09:19:45AM -0600, M. Warner Losh wrote:
> In message: <20020818201549.GA3085@laptop.lambertfam.org>
>             Scott Lambert <lambert@lambertfam.org> writes:
> : The pause, and associated "machine-gunning", on removal of the card is
> : between two and six seconds long.
> 
> The driver busy waits for some things.  Sometimes these waits can be
> rather long, which causes problems for other aps.  I'd expect it to be
> especially bad if you were ejecting the card because we take a long
> time to timeout in that case.  I have a fix for that, but for the
> insertion problem, init takes a while and you'll notice a rather long
> delay in character echo in X when you insert a card often.  Some cards
> respond more quickly than others....

Ok, I just wanted to make sure it wasn't something new creeping in.

Thanks,
-- 
Scott Lambert                    KC5MLE                       Unix SysAdmin
lambert@lambertfam.org      

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 12:18:45 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id B304F37B427
	for <mobile@freebsd.org>; Tue, 20 Aug 2002 12:18:38 -0700 (PDT)
Received: from encontacto.net (adsl-64-173-182-158.dsl.mtry01.pacbell.net [64.173.182.158])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 4DBB743EAC
	for <mobile@freebsd.org>; Tue, 20 Aug 2002 12:17:20 -0700 (PDT)
	(envelope-from eculp@encontacto.net)
Received: from localhost (localhost [127.0.0.1])
  (uid 80)
  by encontacto.net with local; Tue, 20 Aug 2002 12:01:53 -0700
Received: from adsl-64-173-182-155.dsl.mtry01.pacbell.net (adsl-64-173-182-155.dsl.mtry01.pacbell.net [64.173.182.155]) 
	by Mail.EnContacto.Net (IMP) with HTTP for eculp@encontacto.net@encontacto.net;
	Tue, 20 Aug 2002 12:01:53 -0700
Message-ID: <1029870113.3d6292218bae1@Mail.EnContacto.Net>
Date: Tue, 20 Aug 2002 12:01:53 -0700
From: Edwin Culp <eculp@encontacto.net>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: "gavin@itworks.com.au" <gavin@itworks.com.au>,
	"mobile@FreeBSD.ORG" <mobile@FreeBSD.ORG>
Subject: Re: Latest wi0 crashes with stable
References: <00c001c2476b$052af7d0$6401a8c0@bugs> <20020820.005607.81895842.imp@bsdimp.com> <025501c24867$67799d90$6401a8c0@bugs> <20020820.094941.25097040.imp@bsdimp.com>
In-Reply-To: <20020820.094941.25097040.imp@bsdimp.com>
MIME-Version: 1.0
Content-Type: text/plain
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
User-Agent: Internet Messaging Program (IMP) 4.0-cvs
X-Priority: 3 (Normal)
X-Originating-IP:  64.173.182.155
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Quoting "M. Warner Losh" <imp@bsdimp.com>:

 | In message: <025501c24867$67799d90$6401a8c0@bugs>
 |             "Gavin Cameron" <gavin@itworks.com.au> writes:
 | : >
 | : > What does dstumbler say?  Any APs in the area that might be
 | : 
 | : What's dstumbler ? How do I find this value?
 | 
 | dstumbler is one of the bsd-airtools.  There's a port.
 | 
 | : > general direction?
 | : 
 | : Coffee cans on poles ;-)... what have polish people got to do with this
 | : apart from being good conductors? Cheap polish and tram conductor humour
 | ;-)
 | 
 | Well, a common "hack" here in the US is to get a Yuban Coffee Can,
 | punch a hole in the middle of the B and connect an N connector with a
 | short copper wire (on the order of 3cm iirc).  Gives you a decent
 | antenna for not a lot of money, but lacks FCC certification.  Good for
 | listening, but less good for xmit.
 | 
 | Warner

You might take a look at:

http://www.turnpoint.net/wireless/has.html

a Google search will give you more options than you will want to look at.

ed
--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 12:52:44 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 0D09B37B400
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 12:52:42 -0700 (PDT)
Received: from smarthost.yourcomms.net (mailgate.yourcomms.net [195.8.160.1])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 6EAB443E97
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 12:52:37 -0700 (PDT)
	(envelope-from dave@fyonn.net)
Received: from [195.8.191.5] by smarthost.yourcomms.net (NTMail 5.06.0016/GM0002.04.00842b74) with ESMTP id bnlugaaa for freebsd-mobile@freebsd.org; Tue, 20 Aug 2002 20:50:21 +0100
Date: Tue, 20 Aug 2002 20:52:41 +0100
From: David Haworth <dave@fyonn.net>
To: freebsd-mobile@freebsd.org
Subject: Sony Vaio SR11k and jogdial
Message-Id: <20020820205241.31778789.dave@fyonn.net>
X-Mailer: Sylpheed version 0.7.8 (GTK+ 1.2.10; i386-portbld-freebsd4.6)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

good evening folks, 

I've got an old sony vaio sr11k sub notebook that
I'm very happy with. lovely little machine but I'm trying to get the
jogdial working properly. 


I've done my reading on the net and I can't
quite get things right. I've got

device          spic0   at isa? irq 0 port 0x10a0

compiled into the kernel which ID's as this

spic0: device model type = 1
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0

and I run

moused -t jogdial -p /dev/jogdial

from /etc/rc.local (in addition to the one run in the normal rc scripts
for the trackpad. X is configged to use /dev/sysmouse

the current situation is that if I roll the jogdial up and down it acts
as a mousewheel but if I click the wheel in then it acts as a left mouse
button click and what I want is for it to act as a middle mouse button
click.

I've tried 

moused -t jogdial -p /dev/jogdial -m 1=2

and several variations but when I add that flag then the wheel click is
no longer registered at all.

this is all with 4.6-stable

does anyone have any idea's?

many thanks

dave



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 14:50:10 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1E85037B401
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 14:50:05 -0700 (PDT)
Received: from siegetower.ironcastle.net (siegetower.ironcastle.net [12.30.48.133])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 9943643E3B
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 14:50:04 -0700 (PDT)
	(envelope-from chip@chocobo.cx)
Received: from localhost.localdomain (localhost [127.0.0.1])
	by localhost.ironcastle.net (Postfix) with ESMTP id 9B76922E02
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 17:38:56 -0400 (EDT)
Received: from ws-219.simprocontrols.com (ws-219.simprocontrols.com [192.168.2.219])
	by siegetower.ironcastle.net (Postfix) with ESMTP id EED5922E01
	for <freebsd-mobile@freebsd.org>; Tue, 20 Aug 2002 17:38:55 -0400 (EDT)
Subject: Re: Sony Vaio SR11k and jogdial
From: Chip Marshall <chip@chocobo.cx>
Reply-To: chip@chocobo.cx
To: freebsd-mobile@freebsd.org
Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature";
	boundary="=-IHqwa1fKmGGWv3qDLdr1"
X-Mailer: Ximian Evolution 1.0.8 
Date: 20 Aug 2002 17:50:08 -0400
Message-Id: <1029880208.62688.11.camel@tonberry.chocobo.cx>
Mime-Version: 1.0
X-Virus-Scanned: by AMaViS snapshot-20020300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


--=-IHqwa1fKmGGWv3qDLdr1
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

On Tue, 2002-08-20 at 15:52, David Haworth wrote:
[snip]
> the current situation is that if I roll the jogdial up and down it acts
> as a mousewheel but if I click the wheel in then it acts as a left mouse
> button click and what I want is for it to act as a middle mouse button
> click.
>=20
> I've tried=20
>=20
> moused -t jogdial -p /dev/jogdial -m 1=3D2

Did you try "moused -t jogdial -p /dev/jogdial -m 2=3D1"? I made the
mistake of reversing the arguments to -m a bunch of times before I read
the man page really carefully and noticed:
    -m N=3DM  Assign the physical button M to the logical button N.

The virtual button is first, followed by the physical button. Seems
backwards to me, but I guess it makes sense.

--=20
Chip Marshall <chip@chocobo.cx>           http://www.chocobo.cx/chip/
GCM/CS d+(-) s+:++ a21>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+
V-- PS+ PE Y+ PGP++ t+@ R@ tv@ b++@ DI++++ D+(-) G++ e>++ h>++ r++ y?


--=-IHqwa1fKmGGWv3qDLdr1
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (FreeBSD)

iD8DBQA9YrmQ8vyTVl6qbdQRApT7AJ9dfh77VVA1lsS8f8P6UA1J+B2ZgQCgtdrg
jU2BPs7LTElQJVdTw9tnJe8=
=XHxk
-----END PGP SIGNATURE-----

--=-IHqwa1fKmGGWv3qDLdr1--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 21:54:48 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 5698237B400
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 21:54:45 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 89D2943E6A
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 21:54:44 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7L4sfFl020665;
	Tue, 20 Aug 2002 22:54:42 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Tue, 20 Aug 2002 22:54:31 -0600 (MDT)
Message-Id: <20020820.225431.48200026.imp@bsdimp.com>
To: nsayer@quack.kfu.com
Cc: jre@vineyard.net, freebsd-mobile@FreeBSD.ORG
Subject: Re: HostAP on a DWL-520 prism2 PCI card
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <3D6276DE.7010500@kfu.com>
References: <20020815233457.GA15916@jade.nat.elsasser.org>
	<3D6276DE.7010500@kfu.com>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <3D6276DE.7010500@kfu.com>
            Nick Sayer <nsayer@quack.kfu.com> writes:
: Josh Elsasser wrote:
: 
: >I am having trouble setting up my prism2-based dwl-520 pci card.  The
: >card is recognized when I load the if_wi driver:
: >
: >wi0: <Intersil Prism2.5> mem 0xeb103000-0xeb103fff irq 11 at device 14.0 on pci0
: >wi0: 802.11 address: 00:05:5d:ed:af:52
: >wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
: >wi0: Intersil Firmware: Primary 1.00.05, Station 1.03.04
: >
: 
: I could not get any host to associate with station firmware 1.03.04 (on 
: a Prism 2.5 card). I upgraded to 1.04.09 and hosts were able to 
: associate, but under heavy load the card would end up getting locked up, 
: so I have had to drop back to a Prism 2 card for now. 1.03.04 on Prism 2 
: cards (in particular, my MA401) seems to be good.

I'm running a hostap on 1.3.5 on prism2 hardware, and am seeing hangs
under heavy load.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 23:40:25 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 47D9737B400
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 23:40:22 -0700 (PDT)
Received: from borja.sarenet.es (borja.sarenet.es [192.148.167.77])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 15BD243E65
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 23:40:21 -0700 (PDT)
	(envelope-from borjamar@sarenet.es)
Received: from borja.sarenet.es (localhost [127.0.0.1])
	by borja.sarenet.es (8.12.3/8.12.3) with ESMTP id g7L6e4Ev063113;
	Wed, 21 Aug 2002 08:40:05 +0200 (CEST)
	(envelope-from borjamar@sarenet.es)
Content-Type: text/plain;
  charset="iso-8859-1"
From: Borja Marcos <borjamar@sarenet.es>
To: "M. Warner Losh" <imp@bsdimp.com>
Subject: Re: HostAP on a DWL-520 prism2 PCI card
Date: Wed, 21 Aug 2002 08:40:03 +0200
User-Agent: KMail/1.4.2
References: <20020815233457.GA15916@jade.nat.elsasser.org> <3D6276DE.7010500@kfu.com> <20020820.225431.48200026.imp@bsdimp.com>
In-Reply-To: <20020820.225431.48200026.imp@bsdimp.com>
Cc: freebsd-mobile@FreeBSD.ORG
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Message-Id: <200208210840.04088.borjamar@sarenet.es>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Wednesday 21 August 2002 06:54, M. Warner Losh wrote:
> I'm running a hostap on 1.3.5 on prism2 hardware, and am seeing hangs
> under heavy load.

=09I'm running hostap in a Prism2.5 card (D-Link DWL650) with no problems=
=2E I=20
have tried with heavy load, transferring big files, doing a make installw=
orld=20
at the laptop from a NFS filesystem in the hostap machine...

wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 0 on pccard0
wi0: 802.11 address: 00:05:5d:5c:24:01
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.05

FreeBSD nenuial.arnor.es 4.6-STABLE FreeBSD 4.6-STABLE #0: Fri Aug 16 01:=
05:17=20
CEST 2002     root@nenuial.arnor.es:/usr/obj/usr/src/sys/NENUIAL  i386

=09I had problems with this card when using WEP. Anyway, I am using IPSec=
, so I=20
disabled WEP.



=09Borja.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 20 23:51:40 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 0899537B406
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 23:51:36 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3B5B443E4A
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 20 Aug 2002 23:51:35 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7L6pXFl021080;
	Wed, 21 Aug 2002 00:51:34 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Wed, 21 Aug 2002 00:50:52 -0600 (MDT)
Message-Id: <20020821.005052.54576791.imp@bsdimp.com>
To: borjamar@sarenet.es
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: HostAP on a DWL-520 prism2 PCI card
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <200208210840.04088.borjamar@sarenet.es>
References: <3D6276DE.7010500@kfu.com>
	<20020820.225431.48200026.imp@bsdimp.com>
	<200208210840.04088.borjamar@sarenet.es>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <200208210840.04088.borjamar@sarenet.es>
            Borja Marcos <borjamar@sarenet.es> writes:
: 	I had problems with this card when using WEP.

I just changed something that might impact WEP, but I'm not 100%
sure that it will help.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21  3:52:44 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1395837B400
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 03:52:41 -0700 (PDT)
Received: from birch.ripe.net (birch.ripe.net [193.0.1.96])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3FFB243E7B
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 03:52:40 -0700 (PDT)
	(envelope-from marks@ripe.net)
Received: from laptop.6bone.nl (cow.ripe.net [193.0.1.239])
	by birch.ripe.net (8.12.5/8.11.6) with SMTP id g7LAqcF4000355
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 12:52:38 +0200
Received: (nullmailer pid 900 invoked by uid 1000);
	Wed, 21 Aug 2002 10:52:29 -0000
Date: Wed, 21 Aug 2002 12:52:29 +0200
From: Mark Santcroos <marks@ripe.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: acpi, oldcard, newcard, etc
Message-ID: <20020821105229.GB751@laptop.6bone.nl>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.4i
X-Handles: MS6-6BONE, MS18417-RIPE
X-RIPE-Spam-Status: NONE ; -989
X-RIPE-Spam-Level: 
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hi all,

I've acquired a Dell C640, which is a ACPI only laptop.

* ACPI is only available on -CURRENT, but that's not a problem as I was
already running -CURRENT on my previous laptop.

* Machine boots/works fine without ACPI with both OLDCARD and NEWCARD
(Ofcourse no powermanagement available)

* Machine boots fine with ACPI and OLDCARD or no *CARD at all

* Machine hangs during boot with ACPI and NEWCARD on:
  "start_init: trying to /sbin/init"

* With the options with ACPI and where it boots fine, ACPI is not working
  great
  For example, closing the lid makes the machine suspend in some way, but
  opening again doesn't turn my screen on again

For obvious reasons I want to get this working ofcourse.

First step would seem to get the machine booting with both NEWCARD and ACPI 
as OLDCARD is being deprecated.
Next thing would be to get the ACPI correct.

Note that I am willing to spend quite some time on this, but I will need
some guidance here as this part of the kernel is new to me.
(Warner?)

Thanks.

Mark

-- 
Mark Santcroos				RIPE Network Coordination Centre
http://www.ripe.net/home/mark/		New Projects Group/TTM

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21  6:16:21 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id B8EAC37B400
	for <mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 06:16:15 -0700 (PDT)
Received: from itworks.com.au (dsl-210-15-242-193.Melbourne.netspace.net.au [210.15.242.193])
	by mx1.FreeBSD.org (Postfix) with SMTP id 33BE843E4A
	for <mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 06:16:14 -0700 (PDT)
	(envelope-from gavin@itworks.com.au)
Received: (qmail 455 invoked from network); 21 Aug 2002 13:15:06 -0000
Received: from unknown (HELO bugs) (192.168.1.100)
  by chip.gav.itworks.com.au with SMTP; 21 Aug 2002 13:15:06 -0000
Message-ID: <02b901c24914$f9217c10$6401a8c0@bugs>
From: "Gavin Cameron" <gavin@itworks.com.au>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: <mobile@FreeBSD.ORG>
References: <00c001c2476b$052af7d0$6401a8c0@bugs><20020820.005607.81895842.imp@bsdimp.com><025501c24867$67799d90$6401a8c0@bugs> <20020820.094941.25097040.imp@bsdimp.com>
Subject: Re: Latest wi0 crashes with stable
Date: Wed, 21 Aug 2002 23:16:34 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


----- Original Message ----- 
From: "M. Warner Losh" <imp@bsdimp.com>
To: <gavin@itworks.com.au>
Cc: <mobile@FreeBSD.ORG>
Sent: Wednesday, August 21, 2002 1:49 AM
Subject: Re: Latest wi0 crashes with stable


> In message: <025501c24867$67799d90$6401a8c0@bugs>
>             "Gavin Cameron" <gavin@itworks.com.au> writes:
> : >
> : > What does dstumbler say?  Any APs in the area that might be
> : 
> : What's dstumbler ? How do I find this value?
> 
> dstumbler is one of the bsd-airtools.  There's a port.

OK.. found it...

Running dstumber causes the following message pretty much as soon
as I start the program up..

    wi0: timeout in wi_seek to 14b/3c; last status 403c

Now an ifconfig tells me

    status: no carrier

and no nodes can associate with the access port :-(

I think I'll revert back to the files in -stable.

Cheers
Gavin

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21  7:18:58 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 1264E37B400
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 07:18:55 -0700 (PDT)
Received: from mail.speakeasy.net (mail17.speakeasy.net [216.254.0.217])
	by mx1.FreeBSD.org (Postfix) with ESMTP id A9A4743E75
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 07:18:54 -0700 (PDT)
	(envelope-from jhb@FreeBSD.org)
Received: (qmail 23300 invoked from network); 21 Aug 2002 14:18:54 -0000
Received: from unknown (HELO server.baldwin.cx) ([216.27.160.63]) (envelope-sender <jhb@FreeBSD.org>)
          by mail17.speakeasy.net (qmail-ldap-1.03) with DES-CBC3-SHA encrypted SMTP
          for <freebsd-mobile@FreeBSD.ORG>; 21 Aug 2002 14:18:54 -0000
Received: from laptop.baldwin.cx (gw1.twc.weather.com [216.133.140.1])
	by server.baldwin.cx (8.12.5/8.12.5) with ESMTP id g7LEIqBQ017624;
	Wed, 21 Aug 2002 10:18:53 -0400 (EDT)
	(envelope-from jhb@FreeBSD.org)
Message-ID: <XFMail.20020821101858.jhb@FreeBSD.org>
X-Mailer: XFMail 1.5.2 on FreeBSD
X-Priority: 3 (Normal)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
In-Reply-To: <20020821105229.GB751@laptop.6bone.nl>
Date: Wed, 21 Aug 2002 10:18:58 -0400 (EDT)
From: John Baldwin <jhb@FreeBSD.org>
To: Mark Santcroos <marks@ripe.net>
Subject: RE: acpi, oldcard, newcard, etc
Cc: freebsd-mobile@FreeBSD.ORG
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


On 21-Aug-2002 Mark Santcroos wrote:
> Hi all,
> 
> I've acquired a Dell C640, which is a ACPI only laptop.
> 
> * ACPI is only available on -CURRENT, but that's not a problem as I was
> already running -CURRENT on my previous laptop.
> 
> * Machine boots/works fine without ACPI with both OLDCARD and NEWCARD
> (Ofcourse no powermanagement available)
> 
> * Machine boots fine with ACPI and OLDCARD or no *CARD at all
> 
> * Machine hangs during boot with ACPI and NEWCARD on:
>   "start_init: trying to /sbin/init"

Is your CardBus bridge behind a PCI-PCI bridge?  It could be that we aren't
routing the interrupts right in the ACPI case with newcard.  I have some
possible patches to fix this case if so.

> * With the options with ACPI and where it boots fine, ACPI is not working
>   great
>   For example, closing the lid makes the machine suspend in some way, but
>   opening again doesn't turn my screen on again

On my laptop I have to use the power button to wakeup from suspend, opening
the lid doesn't automatically unsuspend.  I have to do the same in Windows, too,
FWIW.

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21  7:25:54 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id D478D37B405; Wed, 21 Aug 2002 07:25:50 -0700 (PDT)
Received: from birch.ripe.net (birch.ripe.net [193.0.1.96])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id CEC7C43E6A; Wed, 21 Aug 2002 07:25:49 -0700 (PDT)
	(envelope-from marks@ripe.net)
Received: from laptop.6bone.nl (cow.ripe.net [193.0.1.239])
	by birch.ripe.net (8.12.5/8.11.6) with SMTP id g7LEPmBG016766;
	Wed, 21 Aug 2002 16:25:48 +0200
Received: (nullmailer pid 60438 invoked by uid 1000);
	Wed, 21 Aug 2002 14:25:38 -0000
Date: Wed, 21 Aug 2002 16:25:38 +0200
From: Mark Santcroos <marks@ripe.net>
To: John Baldwin <jhb@FreeBSD.ORG>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: acpi, oldcard, newcard, etc
Message-ID: <20020821142538.GL751@laptop.6bone.nl>
References: <20020821105229.GB751@laptop.6bone.nl> <XFMail.20020821101858.jhb@FreeBSD.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <XFMail.20020821101858.jhb@FreeBSD.org>
User-Agent: Mutt/1.4i
X-Handles: MS6-6BONE, MS18417-RIPE
X-RIPE-Spam-Status: NONE ; -1023
X-RIPE-Spam-Level: 
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Wed, Aug 21, 2002 at 10:18:58AM -0400, John Baldwin wrote:
> > * Machine hangs during boot with ACPI and NEWCARD on:
> >   "start_init: trying to /sbin/init"
> 
> Is your CardBus bridge behind a PCI-PCI bridge?  It could be that we aren't
> routing the interrupts right in the ACPI case with newcard.  I have some
> possible patches to fix this case if so.

pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
cbb2: <TI1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2

So yes, it is.

Mark

-- 
Mark Santcroos				RIPE Network Coordination Centre
http://www.ripe.net/home/mark/		New Projects Group/TTM

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21  8: 4:25 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id F3D6037B400
	for <freebsd-mobile@freebsd.org>; Wed, 21 Aug 2002 08:04:20 -0700 (PDT)
Received: from orngca-mls01.socal.rr.com (orngca-mls01.socal.rr.com [66.75.160.16])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 8B8F243E3B
	for <freebsd-mobile@freebsd.org>; Wed, 21 Aug 2002 08:04:20 -0700 (PDT)
	(envelope-from bruce@rhodewalt.com)
Received: from bruce (cpe-66-74-108-108.dc.rr.com [66.74.108.108])
	by orngca-mls01.socal.rr.com (8.11.4/8.11.3) with SMTP id g7LF4FA01741
	for <freebsd-mobile@freebsd.org>; Wed, 21 Aug 2002 08:04:15 -0700 (PDT)
From: "Bruce Rhodewalt" <bruce@rhodewalt.com>
To: <freebsd-mobile@freebsd.org>
Subject: Linksys card and large files
Date: Wed, 21 Aug 2002 08:03:45 -0700
Message-ID: <BIEJJAAKCJCMJKKDLIFIGEBGDOAA.bruce@rhodewalt.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Importance: Normal
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I'm looking for troubleshooting advice or parallel stories with happy
endings.

On my FreeBSD 4.6 server, with a Linksys WMP11, small files transfer fine,
but large files (> ~100K) timeout.  This happens using both WebDAV (Web
Folders) and Samba.  I have tested by copying files from the clients
(Windows 2000 and Windows 98) to the server.  If the server is connected by
100Mbps Ethernet, there is no problem.

I've included settings and details below.  I'm running smbd and nmbd as
daemons.  For WebDAV, I'm running Apache 2.

Thanks for any help.

Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672



NIC serial number:                      [ 0123456789   ]
Station name:                           [ hairspray ]
SSID for IBSS creation:                 [ FreeBSD IBSS ]
Current netname (SSID):                 [ linksys ]
Desired netname (SSID):                 [  ]
Current BSSID:                          [ 00:04:5a:cf:e9:6b ]
Channel list:                           [ 2047 ]
IBSS channel:                           [ 6 ]
Current channel:                        [ 6 ]
Comms quality/signal/noise:             [ 92 154 0 ]
Promiscuous mode:                       [ Off ]
Port type (1=BSS, 3=ad-hoc):            [ 1 ]
MAC address:                            [ 00:06:25:a8:03:72 ]
TX rate (selection):                    [ 3 ]
TX rate (actual speed):                 [ 11 ]
RTS/CTS handshake threshold:            [ 2347 ]
Create IBSS:                            [ Off ]
Access point density:                   [ 1 ]
Power Mgmt (1=on, 0=off):               [ 0 ]
Max sleep time:                         [ 100 ]
WEP encryption:                         [ Off ]
TX encryption key:                      [ 1 ]
Encryption keys:                        [  ][  ][  ][  ]

wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.12 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::206:25ff:fea8:372%wi0 prefixlen 64 scopeid 0x1
        ether 00:06:25:a8:03:72
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
        status: associated
        ssid linksys 1:""
        stationname hairspray
        channel 6 authmode OPEN powersavemode OFF powersavesleep 100
        wepmode OFF weptxkey 1
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:04:e2:20:97:70
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000

Note: wi0 and rl0 (the NIC) have never both been mapped to TCP/IP at any one
time.  That is, the IP address 192.168.1.12 is the only one in use on this
machine.  When I test over the wired connection, wi0 is not mapped to any IP
address, but rl0 uses 192.168.1.12.

Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21 21: 6:30 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A613737B400
	for <mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 21:06:27 -0700 (PDT)
Received: from orngca-mls03.socal.rr.com (orngca-mls03.socal.rr.com [66.75.160.18])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3AFA543E6A
	for <mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 21:06:27 -0700 (PDT)
	(envelope-from bruce@rhodewalt.com)
Received: from bruce (dc-66-74-108-108.dc.rr.com [66.74.108.108] (may be forged))
	by orngca-mls03.socal.rr.com (8.11.6+Sun/8.11.3) with SMTP id g7M46Qs13939
	for <mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 21:06:26 -0700 (PDT)
From: "Bruce Rhodewalt" <bruce@rhodewalt.com>
To: <mobile@FreeBSD.ORG>
Subject: Linksys WMP11 and timeouts
Date: Wed, 21 Aug 2002 21:05:53 -0700
Message-ID: <BIEJJAAKCJCMJKKDLIFIAECODOAA.bruce@rhodewalt.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Importance: Normal
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

My FreeBSD 4.6-RELEASE server has a Linksys WMP11 PCI card which works as
required except for any inbound transfers of large files.  Copies of files
larger than about 100K from any workstation, via any protocol (WebDAV, FTP,
Samba), generally timeout.  Copies of the same files in the opposite
direction take less than a second.

I'm using a BEFW11S4 AP, into which the source workstations (Windows 98 and
Windows 2000) are directly plugged.

I don't know where to continue with my troubleshooting.  Thanks for any
help.

Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 21 22:10:43 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 9A9A137B401
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 22:10:41 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 75B9143E6A
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 21 Aug 2002 22:10:40 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7M5AZFl027127;
	Wed, 21 Aug 2002 23:10:39 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Wed, 21 Aug 2002 21:38:06 -0600 (MDT)
Message-Id: <20020821.213806.22558637.imp@bsdimp.com>
To: marks@ripe.net
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: acpi, oldcard, newcard, etc
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <20020821105229.GB751@laptop.6bone.nl>
References: <20020821105229.GB751@laptop.6bone.nl>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <20020821105229.GB751@laptop.6bone.nl>
            Mark Santcroos <marks@ripe.net> writes:
: First step would seem to get the machine booting with both NEWCARD and ACPI 
: as OLDCARD is being deprecated.
: Next thing would be to get the ACPI correct.
: 
: Note that I am willing to spend quite some time on this, but I will need
: some guidance here as this part of the kernel is new to me.
: (Warner?)

ok unset acpi_load
ok boot

is what I do on my laptop far too often.  I'm testing some patches
from jhb that should fix interrupt routing for pci devices (which will
fix both newcard/oldcard).  

I'd get ACPI working first before adding cardbus.  However, this is
the first I've heard of cardbus hang problems that are related to
acpi.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  4:11:14 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 7F90337B400
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 04:11:12 -0700 (PDT)
Received: from birch.ripe.net (birch.ripe.net [193.0.1.96])
	by mx1.FreeBSD.org (Postfix) with ESMTP id A6DAD43E42
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 04:11:11 -0700 (PDT)
	(envelope-from marks@ripe.net)
Received: from laptop.6bone.nl (cow.ripe.net [193.0.1.239])
	by birch.ripe.net (8.12.5/8.11.6) with SMTP id g7MBAvBG014772;
	Thu, 22 Aug 2002 13:10:57 +0200
Received: (nullmailer pid 28405 invoked by uid 1000);
	Thu, 22 Aug 2002 11:10:45 -0000
Date: Thu, 22 Aug 2002 13:10:45 +0200
From: Mark Santcroos <marks@ripe.net>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: acpi, oldcard, newcard, etc
Message-ID: <20020822111045.GC15440@laptop.6bone.nl>
References: <20020821105229.GB751@laptop.6bone.nl> <20020821.213806.22558637.imp@bsdimp.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20020821.213806.22558637.imp@bsdimp.com>
User-Agent: Mutt/1.4i
X-Handles: MS6-6BONE, MS18417-RIPE
X-RIPE-Spam-Status: NONE ; -1034
X-RIPE-Spam-Level: 
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Wed, Aug 21, 2002 at 09:38:06PM -0600, M. Warner Losh wrote:
> is what I do on my laptop far too often.  I'm testing some patches
> from jhb that should fix interrupt routing for pci devices (which will
> fix both newcard/oldcard).  

Can I get these patches too?

> I'd get ACPI working first before adding cardbus.  

So you won't "mind" me still using OLDCARD?

Mark

-- 
Mark Santcroos				RIPE Network Coordination Centre
http://www.ripe.net/home/mark/		New Projects Group/TTM

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  7:25:43 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id D916A37B400
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 07:25:39 -0700 (PDT)
Received: from smtp3.southeast.rr.com (smtp3.southeast.rr.com [24.93.67.84])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 47EE543E6A
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 07:25:39 -0700 (PDT)
	(envelope-from morganw@chemikals.org)
Received: from mail7.sc.rr.com (fe7 [24.93.67.54])
	by smtp3.southeast.rr.com (8.12.5/8.12.2) with ESMTP id g7MEPHga013230;
	Thu, 22 Aug 2002 10:25:18 -0400 (EDT)
Received: from volatile.chemikals.org ([24.88.49.48]) by mail7.sc.rr.com  with Microsoft SMTPSVC(5.5.1877.757.75);
	 Thu, 22 Aug 2002 10:25:32 -0400
Date: Thu, 22 Aug 2002 10:25:32 -0400 (EDT)
From: Wesley Morgan <morganw@chemikals.org>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: marks@ripe.net, <freebsd-mobile@freebsd.org>
Subject: Re: acpi, oldcard, newcard, etc
In-Reply-To: <20020821.213806.22558637.imp@bsdimp.com>
Message-ID: <20020822102429.X99575-100000@volatile.chemikals.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

OLDCARD is being deprecated? I still need this to get my laptop to boot
with the Xircom pccard I have. Will these kind of problems be fixed before
it is removed?

On Wed, 21 Aug 2002, M. Warner Losh wrote:

> In message: <20020821105229.GB751@laptop.6bone.nl>
>             Mark Santcroos <marks@ripe.net> writes:
> : First step would seem to get the machine booting with both NEWCARD and ACPI
> : as OLDCARD is being deprecated.
> : Next thing would be to get the ACPI correct.
> :
> : Note that I am willing to spend quite some time on this, but I will need
> : some guidance here as this part of the kernel is new to me.
> : (Warner?)
>
> ok unset acpi_load
> ok boot
>
> is what I do on my laptop far too often.  I'm testing some patches
> from jhb that should fix interrupt routing for pci devices (which will
> fix both newcard/oldcard).
>
> I'd get ACPI working first before adding cardbus.  However, this is
> the first I've heard of cardbus hang problems that are related to
> acpi.
>
> Warner
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
>

-- 
                                           _ __ ___ ____  ___ ___ ___
          Wesley N Morgan                       _ __ ___ | _ ) __|   \
          morganw@chemikals.org                     _ __ | _ \._ \ |) |
          FreeBSD: The Power To Serve                  _ |___/___/___/
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  7:57:14 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 75A6137B400
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 07:57:13 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id EDDB243E77
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 07:57:11 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7MEv8Fl029810;
	Thu, 22 Aug 2002 08:57:08 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Thu, 22 Aug 2002 08:57:04 -0600 (MDT)
Message-Id: <20020822.085704.122027711.imp@bsdimp.com>
To: marks@ripe.net
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: acpi, oldcard, newcard, etc
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <20020822111045.GC15440@laptop.6bone.nl>
References: <20020821105229.GB751@laptop.6bone.nl>
	<20020821.213806.22558637.imp@bsdimp.com>
	<20020822111045.GC15440@laptop.6bone.nl>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <20020822111045.GC15440@laptop.6bone.nl>
            Mark Santcroos <marks@ripe.net> writes:
: On Wed, Aug 21, 2002 at 09:38:06PM -0600, M. Warner Losh wrote:
: > is what I do on my laptop far too often.  I'm testing some patches
: > from jhb that should fix interrupt routing for pci devices (which will
: > fix both newcard/oldcard).  
: 
: Can I get these patches too?

I'd ask jhb for them, because the patches that I have from him screw
me up pretty badly for reasons unknown.  It is likely my fault.

: > I'd get ACPI working first before adding cardbus.  
: 
: So you won't "mind" me still using OLDCARD?

OLDCARD will be in 5.0

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  8: 0:24 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id DB34D37B400
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 08:00:21 -0700 (PDT)
Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 46D7643E3B
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 08:00:20 -0700 (PDT)
	(envelope-from imp@bsdimp.com)
Received: from localhost (warner@rover2.village.org [10.0.0.1])
	by harmony.village.org (8.12.3/8.12.3) with ESMTP id g7MF0HFl029842;
	Thu, 22 Aug 2002 09:00:17 -0600 (MDT)
	(envelope-from imp@bsdimp.com)
Date: Thu, 22 Aug 2002 09:00:14 -0600 (MDT)
Message-Id: <20020822.090014.52163448.imp@bsdimp.com>
To: morganw@chemikals.org
Cc: marks@ripe.net, freebsd-mobile@freebsd.org
Subject: Re: acpi, oldcard, newcard, etc
From: "M. Warner Losh" <imp@bsdimp.com>
In-Reply-To: <20020822102429.X99575-100000@volatile.chemikals.org>
References: <20020821.213806.22558637.imp@bsdimp.com>
	<20020822102429.X99575-100000@volatile.chemikals.org>
X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In message: <20020822102429.X99575-100000@volatile.chemikals.org>
            Wesley Morgan <morganw@chemikals.org> writes:
: OLDCARD is being deprecated? I still need this to get my laptop to boot
: with the Xircom pccard I have. Will these kind of problems be fixed before
: it is removed?

Short answer: Yes.

Long answer:

5.0 will have both oldcard and newcard.  newcard will be the default.
oldcard will be available.  It will be removed before 6.0.

Warner

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  8: 8:14 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 0607537B400
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 08:08:13 -0700 (PDT)
Received: from mail.speakeasy.net (mail12.speakeasy.net [216.254.0.212])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 9AA6843E6E
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 08:08:12 -0700 (PDT)
	(envelope-from jhb@FreeBSD.org)
Received: (qmail 4711 invoked from network); 22 Aug 2002 15:08:12 -0000
Received: from unknown (HELO server.baldwin.cx) ([216.27.160.63]) (envelope-sender <jhb@FreeBSD.org>)
          by mail12.speakeasy.net (qmail-ldap-1.03) with DES-CBC3-SHA encrypted SMTP
          for <imp@bsdimp.com>; 22 Aug 2002 15:08:12 -0000
Received: from laptop.baldwin.cx (gw1.twc.weather.com [216.133.140.1])
	by server.baldwin.cx (8.12.5/8.12.5) with ESMTP id g7MF8ABQ021406;
	Thu, 22 Aug 2002 11:08:10 -0400 (EDT)
	(envelope-from jhb@FreeBSD.org)
Message-ID: <XFMail.20020822110815.jhb@FreeBSD.org>
X-Mailer: XFMail 1.5.2 on FreeBSD
X-Priority: 3 (Normal)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
In-Reply-To: <20020822111045.GC15440@laptop.6bone.nl>
Date: Thu, 22 Aug 2002 11:08:15 -0400 (EDT)
From: John Baldwin <jhb@FreeBSD.org>
To: Mark Santcroos <marks@ripe.net>
Subject: Re: acpi, oldcard, newcard, etc
Cc: freebsd-mobile@FreeBSD.ORG, "M. Warner Losh" <imp@bsdimp.com>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


On 22-Aug-2002 Mark Santcroos wrote:
> On Wed, Aug 21, 2002 at 09:38:06PM -0600, M. Warner Losh wrote:
>> is what I do on my laptop far too often.  I'm testing some patches
>> from jhb that should fix interrupt routing for pci devices (which will
>> fix both newcard/oldcard).  
> 
> Can I get these patches too?

I'll be committing them to the tree fairly soon (maybe today) since Peter
needs it for the quad Itanium2 box to work.

-- 

John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve!"  -  http://www.FreeBSD.org/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  8:57: 5 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id E696837B400
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 08:57:02 -0700 (PDT)
Received: from axl.seasidesoftware.co.za (axl.seasidesoftware.co.za [196.31.7.201])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 332AD43E7B
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 08:55:28 -0700 (PDT)
	(envelope-from sheldonh@starjuice.net)
Received: from sheldonh by axl.seasidesoftware.co.za with local (Exim 4.10)
	id 17huIl-000KHJ-00
	for freebsd-mobile@FreeBSD.org; Thu, 22 Aug 2002 17:55:15 +0200
Date: Thu, 22 Aug 2002 17:55:15 +0200
From: Sheldon Hearn <sheldonh@starjuice.net>
To: freebsd-mobile@FreeBSD.org
Subject: config line commented out in pccard.conf
Message-ID: <20020822155515.GB71936@starjuice.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hi folks,

The pccard.conf entry for the 3Com 3CXEM556 modem+NIC in RELENG_4 looks
like this:

# 3Com Megahertz 3CCFEM556BI, 3CXEM556 and model B
# as ethernet
card "3Com" "/Megahertz 3C(CF|X)EM556/"
        config  default "ep" ? 0x1
#       config  auto "sio" ?
        insert  /etc/pccard_ether $device start
        remove  /etc/pccard_ether $device stop

Does that commented out line for sio mean that this card won't work as a
modem?

I've downgraded to RELENG_4 so that I can get a PCMCIA modem working,
but I wanna make sure I buy something that works (especially since I'm
buying two and they're not cheap).

Ciao,
Sheldon.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9: 5:49 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id DD28A37B400
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:05:46 -0700 (PDT)
Received: from postal1.es.net (postal1.es.net [198.128.3.205])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 421A743E6E
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:05:46 -0700 (PDT)
	(envelope-from oberman@es.net)
Received: from ptavv.es.net ([198.128.4.29])
        by postal1.es.net (Postal Node 1) with ESMTP id GQF37091;
        Thu, 22 Aug 2002 09:05:45 -0700
Received: from ptavv (localhost [127.0.0.1])
	by ptavv.es.net (Postfix) with ESMTP
	id 313C15D04; Thu, 22 Aug 2002 09:05:44 -0700 (PDT)
To: Sheldon Hearn <sheldonh@starjuice.net>
Cc: freebsd-mobile@FreeBSD.org
Subject: Re: config line commented out in pccard.conf 
In-reply-to: Your message of "Thu, 22 Aug 2002 17:55:15 +0200."
             <20020822155515.GB71936@starjuice.net> 
Date: Thu, 22 Aug 2002 09:05:44 -0700
From: "Kevin Oberman" <oberman@es.net>
Message-Id: <20020822160544.313C15D04@ptavv.es.net>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

> Date: Thu, 22 Aug 2002 17:55:15 +0200
> From: Sheldon Hearn <sheldonh@starjuice.net>
> Sender: owner-freebsd-mobile@FreeBSD.ORG
> 
> Hi folks,
> 
> The pccard.conf entry for the 3Com 3CXEM556 modem+NIC in RELENG_4 looks
> like this:
> 
> # 3Com Megahertz 3CCFEM556BI, 3CXEM556 and model B
> # as ethernet
> card "3Com" "/Megahertz 3C(CF|X)EM556/"
>         config  default "ep" ? 0x1
> #       config  auto "sio" ?
>         insert  /etc/pccard_ether $device start
>         remove  /etc/pccard_ether $device stop
> 
> Does that commented out line for sio mean that this card won't work as a
> modem?
> 
> I've downgraded to RELENG_4 so that I can get a PCMCIA modem working,
> but I wanna make sure I buy something that works (especially since I'm
> buying two and they're not cheap).

Under V4 you can enable either the modem or the Ethernet on most dual
cards. You can select which one operates by commenting out the other
in the pccard.conf file. (Always create a pccard.conf file in /etc and
edit it. Don't edit the one in /etc/defaults or simply copy the one
from /etc/defaults into /etc. Just enter he specific entries that you
need modified.)

The entry for the card in /etc/defaults will result in the card being
used as an Ethernet. If you need to use it as a modem, comment out the
config  default "ep" ? 0x1 line and uncomment the config auto "sio" ?
line. 

R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9:13:19 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id EE03337B400; Thu, 22 Aug 2002 09:13:15 -0700 (PDT)
Received: from mx1.eskimo.com (mx1.eskimo.com [204.122.16.48])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 7D2A143E8A; Thu, 22 Aug 2002 09:13:15 -0700 (PDT)
	(envelope-from ripper@eskimo.com)
Received: from eskimo.com (ripper@eskimo.com [204.122.16.13])
	by mx1.eskimo.com (8.9.1a/8.8.8) with ESMTP id JAA29542;
	Thu, 22 Aug 2002 09:13:09 -0700
Received: (from ripper@localhost)
	by eskimo.com (8.9.1a/8.9.1) id JAA05971;
	Thu, 22 Aug 2002 09:13:09 -0700 (PDT)
Date: Thu, 22 Aug 2002 09:13:09 -0700 (PDT)
Message-Id: <200208221613.JAA05971@eskimo.com>
From: Ross Lippert <ripper@eskimo.com>
To: freebsd-questions@freebsd.org, freebsd-mobile@freebsd.org
Subject: toshiba satellite LAN card with funny chip id 10598086
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


Hi, I am trying to install 4.6 on the above laptop which is a toshiba
satellite 1405-S151 (to be specific).  The biggest pain so far is that the
onboard LAN does not seem to be seen.

I checked pciconf -l

and found it to be a none@pci:0:10:0 with chip id 10598086.

Pulling out my trusty pci index, I found that the 1059 maps to intel's (8086)
   82551QM Ethernet Controller
which, from what I can tell on the specs at intel should behave just like a
   82559 [Ethernet Pro 100]
which has an id of 12298086.

I remember once I figured out how to make a hack to the pci sources of
the kernel to make a pci device with a funny uid get detected as
something with a known uid (I did this for a funky sound-blaster pci
card months ago), however, time is short, and I really have forgotten
what I need to hack on to do this.

Can someone offer me some guidance?  Also, if anyone has any experience with
this brand of toshiba, I'd welcome other input, but this ethernet thing will
either make or break any chance of getting FreeBSD working right on it.




-r

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9:14:17 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 9098D37B405
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:14:14 -0700 (PDT)
Received: from axl.seasidesoftware.co.za (axl.seasidesoftware.co.za [196.31.7.201])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 041C343E88
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:14:03 -0700 (PDT)
	(envelope-from sheldonh@starjuice.net)
Received: from sheldonh by axl.seasidesoftware.co.za with local (Exim 4.10)
	id 17huai-000KJA-00; Thu, 22 Aug 2002 18:13:48 +0200
Date: Thu, 22 Aug 2002 18:13:48 +0200
From: Sheldon Hearn <sheldonh@starjuice.net>
To: Kevin Oberman <oberman@es.net>
Cc: freebsd-mobile@FreeBSD.org
Subject: Re: config line commented out in pccard.conf
Message-ID: <20020822161348.GA77965@starjuice.net>
Mail-Followup-To: Kevin Oberman <oberman@es.net>,
	freebsd-mobile@FreeBSD.org
References: <20020822155515.GB71936@starjuice.net> <20020822160544.313C15D04@ptavv.es.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20020822160544.313C15D04@ptavv.es.net>
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On (2002/08/22 09:05), Kevin Oberman wrote:

> The entry for the card in /etc/defaults will result in the card being
> used as an Ethernet. If you need to use it as a modem, comment out the
> config  default "ep" ? 0x1 line and uncomment the config auto "sio" ?
> line. 

Phew, okay.  That's great news.  I've been dicking around trying to find
something I know will work before spending the cash for a week now.

Thanks!
Sheldon.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9:27:22 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CB43137B400
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:27:20 -0700 (PDT)
Received: from postal3.es.net (postal3.es.net [198.128.3.207])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 5868543E65
	for <freebsd-mobile@FreeBSD.org>; Thu, 22 Aug 2002 09:27:20 -0700 (PDT)
	(envelope-from oberman@es.net)
Received: from ptavv.es.net ([198.128.4.29])
        by postal3.es.net (Postal Node 3) with ESMTP id GQF37091;
        Thu, 22 Aug 2002 09:27:19 -0700
Received: from ptavv (localhost [127.0.0.1])
	by ptavv.es.net (Postfix) with ESMTP
	id 3A9485D06; Thu, 22 Aug 2002 09:27:19 -0700 (PDT)
To: Sheldon Hearn <sheldonh@starjuice.net>
Cc: freebsd-mobile@FreeBSD.org
Subject: Re: config line commented out in pccard.conf 
In-reply-to: Your message of "Thu, 22 Aug 2002 18:13:48 +0200."
             <20020822161348.GA77965@starjuice.net> 
Date: Thu, 22 Aug 2002 09:27:19 -0700
From: "Kevin Oberman" <oberman@es.net>
Message-Id: <20020822162719.3A9485D06@ptavv.es.net>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

> Date: Thu, 22 Aug 2002 18:13:48 +0200
> From: Sheldon Hearn <sheldonh@starjuice.net>
> Sender: Sheldon Hearn <sheldonh@starjuice.net>
> 
> On (2002/08/22 09:05), Kevin Oberman wrote:
> 
> > The entry for the card in /etc/defaults will result in the card being
> > used as an Ethernet. If you need to use it as a modem, comment out the
> > config  default "ep" ? 0x1 line and uncomment the config auto "sio" ?
> > line. 
> 
> Phew, okay.  That's great news.  I've been dicking around trying to find
> something I know will work before spending the cash for a week now.

Good luck! Most people think that the requirement to only use the card
as a modem or an Ethernet at any time is bad news.

R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9:34:47 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id D8CA837B400; Thu, 22 Aug 2002 09:34:40 -0700 (PDT)
Received: from mailout03.sul.t-online.com (mailout03.sul.t-online.com [194.25.134.81])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 2CED343E4A; Thu, 22 Aug 2002 09:34:40 -0700 (PDT)
	(envelope-from garyj@jennejohn.org)
Received: from fwd02.sul.t-online.de 
	by mailout03.sul.t-online.com with smtp 
	id 17huur-0003AK-07; Thu, 22 Aug 2002 18:34:37 +0200
Received: from peedub.jennejohn.org (520017439985-0001@[217.235.123.35]) by fmrl02.sul.t-online.com
	with esmtp id 17huud-0WBXv6C; Thu, 22 Aug 2002 18:34:23 +0200
Received: from peedub.jennejohn.org (localhost [127.0.0.1])
	by peedub.jennejohn.org (8.12.5/8.11.6) with ESMTP id g7MGYMok005121;
	Thu, 22 Aug 2002 18:34:27 +0200 (CEST)
	(envelope-from garyj@peedub.jennejohn.org)
Message-Id: <200208221634.g7MGYMok005121@peedub.jennejohn.org>
X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.3
To: Ross Lippert <ripper@eskimo.com>
Cc: freebsd-questions@freebsd.org, freebsd-mobile@freebsd.org
Subject: Re: toshiba satellite LAN card with funny chip id 10598086 
Reply-To: Gary Jennejohn <garyj@jennejohn.org>
In-reply-to: Your message of "Thu, 22 Aug 2002 09:13:09 PDT."
             <200208221613.JAA05971@eskimo.com> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Thu, 22 Aug 2002 18:34:22 +0200
From: Gary Jennejohn <garyj@jennejohn.org>
X-Sender: 520017439985-0001@t-dialin.net
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Ross Lippert writes:
> 
> Hi, I am trying to install 4.6 on the above laptop which is a toshiba
> satellite 1405-S151 (to be specific).  The biggest pain so far is that the
> onboard LAN does not seem to be seen.
> 
> I checked pciconf -l
> 
> and found it to be a none@pci:0:10:0 with chip id 10598086.
> 
> Pulling out my trusty pci index, I found that the 1059 maps to intel's (8086)
>    82551QM Ethernet Controller
> which, from what I can tell on the specs at intel should behave just like a
>    82559 [Ethernet Pro 100]
> which has an id of 12298086.
> 
> I remember once I figured out how to make a hack to the pci sources of
> the kernel to make a pci device with a funny uid get detected as
> something with a known uid (I did this for a funky sound-blaster pci
> card months ago), however, time is short, and I really have forgotten
> what I need to hack on to do this.
> 
> Can someone offer me some guidance?  Also, if anyone has any experience with
> this brand of toshiba, I'd welcome other input, but this ethernet thing will
> either make or break any chance of getting FreeBSD working right on it.
> 

Just edit if_fxp.c and replace 0x1229 with 0x1059. There's only
one place in the file where the change is required.

---
Gary Jennejohn / garyj@jennejohn.org gj@freebsd.org gj@denx.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22  9:57:49 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 81BFF37B400; Thu, 22 Aug 2002 09:57:46 -0700 (PDT)
Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 0401A43E42; Thu, 22 Aug 2002 09:57:46 -0700 (PDT)
	(envelope-from dan@dan.emsphone.com)
Received: (from dan@localhost)
	by dan.emsphone.com (8.12.5/8.12.5) id g7MGvfmG056909;
	Thu, 22 Aug 2002 11:57:41 -0500 (CDT)
	(envelope-from dan)
Date: Thu, 22 Aug 2002 11:57:41 -0500
From: Dan Nelson <dnelson@allantgroup.com>
To: Ross Lippert <ripper@eskimo.com>
Cc: freebsd-questions@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
Subject: Re: toshiba satellite LAN card with funny chip id 10598086
Message-ID: <20020822165741.GA17838@dan.emsphone.com>
References: <200208221613.JAA05971@eskimo.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <200208221613.JAA05971@eskimo.com>
X-OS: FreeBSD 5.0-CURRENT
X-message-flag: Outlook Error
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In the last episode (Aug 22), Ross Lippert said:
> Hi, I am trying to install 4.6 on the above laptop which is a toshiba
> satellite 1405-S151 (to be specific).  The biggest pain so far is that the
> onboard LAN does not seem to be seen.
> 
> I checked pciconf -l
> 
> and found it to be a none@pci:0:10:0 with chip id 10598086.
> 
> Pulling out my trusty pci index, I found that the 1059 maps to intel's (8086)
>    82551QM Ethernet Controller
> which, from what I can tell on the specs at intel should behave just like a
>    82559 [Ethernet Pro 100]
> which has an id of 12298086.

Try adding a line for 0x1059 in the fxp_ident_table in
sys/dev/fxp/if_fxp.c.  If you're lucky, it'll work :)

-- 
	Dan Nelson
	dnelson@allantgroup.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 10:51:35 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 0C45E37B400; Thu, 22 Aug 2002 10:51:30 -0700 (PDT)
Received: from mx1.eskimo.com (mx1.eskimo.com [204.122.16.48])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 07ABF43E6A; Thu, 22 Aug 2002 10:51:29 -0700 (PDT)
	(envelope-from ripper@eskimo.com)
Received: from eskimo.com (ripper@eskimo.com [204.122.16.13])
	by mx1.eskimo.com (8.9.1a/8.8.8) with ESMTP id KAA27220;
	Thu, 22 Aug 2002 10:51:26 -0700
Received: (from ripper@localhost)
	by eskimo.com (8.9.1a/8.9.1) id KAA18198;
	Thu, 22 Aug 2002 10:51:25 -0700 (PDT)
Date: Thu, 22 Aug 2002 10:51:25 -0700 (PDT)
Message-Id: <200208221751.KAA18198@eskimo.com>
From: Ross Lippert <ripper@eskimo.com>
To: freebsd-questions@freebsd.org, freebsd-mobile@freebsd.org
Subject: Thank you all
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


For telling me how to get the funny ethernet card to get recognized.  Modifying
if_fxp.c did the trick like you suggested.  Working well.

Sound even seems ot be up.

Now on to X.  I have noticed that the video card is coming up as a none in
pciconf -l with chip 88201023 which is a cyberblade xpai1 or some such.  Is
it bad for the kernel not to see this chip or is it just up to X to find it?

Secondly, when I boot just to the console, or run X I just get this tiny
screen about half the dimensions of the physical screen bordered by black.
It seems that this is something people have had happen on toshiba's.  Anyhow
I guess my question is

1) should I do an additional kernel hack to get the cyberblade cade recognized
by the kernel
or
2) should I start hacking around with XF86Config to see if I can get the
full screen?
or
3) both
or
4) something completely different?





-r

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 11: 4:34 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 06D8937B400; Thu, 22 Aug 2002 11:04:30 -0700 (PDT)
Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 7FD9343E77; Thu, 22 Aug 2002 11:04:29 -0700 (PDT)
	(envelope-from dan@dan.emsphone.com)
Received: (from dan@localhost)
	by dan.emsphone.com (8.12.5/8.12.5) id g7MI4PVf089427;
	Thu, 22 Aug 2002 13:04:25 -0500 (CDT)
	(envelope-from dan)
Date: Thu, 22 Aug 2002 13:04:25 -0500
From: Dan Nelson <dnelson@allantgroup.com>
To: Ross Lippert <ripper@eskimo.com>
Cc: freebsd-questions@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
Subject: Re: Thank you all
Message-ID: <20020822180424.GB17838@dan.emsphone.com>
References: <200208221751.KAA18198@eskimo.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <200208221751.KAA18198@eskimo.com>
X-OS: FreeBSD 5.0-CURRENT
X-message-flag: Outlook Error
User-Agent: Mutt/1.5.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

In the last episode (Aug 22), Ross Lippert said:
> For telling me how to get the funny ethernet card to get recognized. 
> Modifying if_fxp.c did the trick like you suggested.  Working well.

Use the send-pr command to send a patch so this gets added to the
official source tree.
 
> Now on to X.  I have noticed that the video card is coming up as a
> none in pciconf -l with chip 88201023 which is a cyberblade xpai1 or
> some such.  Is it bad for the kernel not to see this chip or is it
> just up to X to find it?

This is fine.  All the kernel cares about is plain text mode.
 
> Secondly, when I boot just to the console, or run X I just get this
> tiny screen about half the dimensions of the physical screen bordered
> by black. It seems that this is something people have had happen on
> toshiba's.  Anyhow I guess my question is

Most laptops do this, actually, since a standard VGA console is 640x400
and no laptops are that resolution anymore :).  There's probably a
hotkey to toggle "scale/noscale".  On Sony and Dell laptops, it's
<Fn>+F.  The correct fix for X is to specify your laptop's native
resolution in your XF86Config file.

-- 
	Dan Nelson
	dnelson@allantgroup.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 11:33:17 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 09BF837B400; Thu, 22 Aug 2002 11:33:13 -0700 (PDT)
Received: from poup.poupinou.org (poup.poupinou.org [195.101.94.96])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 6FB0843E42; Thu, 22 Aug 2002 11:33:12 -0700 (PDT)
	(envelope-from ducrot@poupinou.org)
Received: from ducrot by poup.poupinou.org with local (Exim)
	id 17hwh4-0006nI-00; Thu, 22 Aug 2002 20:28:30 +0200
Date: Thu, 22 Aug 2002 20:28:30 +0200
To: Dan Nelson <dnelson@allantgroup.com>
Cc: Ross Lippert <ripper@eskimo.com>, freebsd-questions@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
Subject: Re: Thank you all
Message-ID: <20020822182830.GB26088@poup.poupinou.org>
References: <200208221751.KAA18198@eskimo.com> <20020822180424.GB17838@dan.emsphone.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20020822180424.GB17838@dan.emsphone.com>
User-Agent: Mutt/1.3.28i
From: Ducrot Bruno <ducrot@poupinou.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Thu, Aug 22, 2002 at 01:04:25PM -0500, Dan Nelson wrote:
> In the last episode (Aug 22), Ross Lippert said:
> > For telling me how to get the funny ethernet card to get recognized. 
> > Modifying if_fxp.c did the trick like you suggested.  Working well.
> 
> Use the send-pr command to send a patch so this gets added to the
> official source tree.
>  
> > Now on to X.  I have noticed that the video card is coming up as a
> > none in pciconf -l with chip 88201023 which is a cyberblade xpai1 or
> > some such.  Is it bad for the kernel not to see this chip or is it
> > just up to X to find it?
> 
> This is fine.  All the kernel cares about is plain text mode.
>  
> > Secondly, when I boot just to the console, or run X I just get this
> > tiny screen about half the dimensions of the physical screen bordered
> > by black. It seems that this is something people have had happen on
> > toshiba's.  Anyhow I guess my question is
> 
> Most laptops do this, actually, since a standard VGA console is 640x400
> and no laptops are that resolution anymore :).  There's probably a
> hotkey to toggle "scale/noscale".  On Sony and Dell laptops, it's
> <Fn>+F.  The correct fix for X is to specify your laptop's native
> resolution in your XF86Config file.

I don't know for other toshiba laptop, but my Satellite 3000-100 display
the console at fullscreen.  It is also a BIOS setup.

-- 
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 13: 1: 4 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 8E79C37B400; Thu, 22 Aug 2002 13:00:59 -0700 (PDT)
Received: from mx1.eskimo.com (mx1.eskimo.com [204.122.16.48])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id B3CBD43E6A; Thu, 22 Aug 2002 13:00:57 -0700 (PDT)
	(envelope-from ripper@eskimo.com)
Received: from eskimo.com (ripper@eskimo.com [204.122.16.13])
	by mx1.eskimo.com (8.9.1a/8.8.8) with ESMTP id NAA11126;
	Thu, 22 Aug 2002 13:00:47 -0700
Received: (from ripper@localhost)
	by eskimo.com (8.9.1a/8.9.1) id NAA05889;
	Thu, 22 Aug 2002 13:00:48 -0700 (PDT)
Date: Thu, 22 Aug 2002 13:00:48 -0700 (PDT)
Message-Id: <200208222000.NAA05889@eskimo.com>
From: Ross Lippert <ripper@eskimo.com>
To: dnelson@allantgroup.com
Cc: freebsd-questions@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
In-reply-to: <20020822180424.GB17838@dan.emsphone.com> (message from Dan
	Nelson on Thu, 22 Aug 2002 13:04:25 -0500)
Subject: Re: Thank you all
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org



Actually, there was a snag.  While I was able to get fxp detected and
running and rebootd it and it was found many times after, it got booted
once into winXP and after that, it seems to
1) hang just after fxp0 is announced
2) have some sort of terrible divide by 0 error just after fxp0 is
announced.

It will boot again with kernel.old (which does not detect the fxp0).

Clearly, though, this card is not exactly the ethernet pro I am saying
it is.  And I don't know how it is being put into such a strange state
by the winXP boot.

Any advice on what may be going on is appreciated.  I'll have my hands on
the machine this evening again to play with so I can get, hopefully a better
error message.


-r

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 13: 6:39 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 917B837B400
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 13:06:37 -0700 (PDT)
Received: from moek.pir.net (moek.pir.net [130.64.1.215])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 3EDF543E72
	for <freebsd-mobile@freebsd.org>; Thu, 22 Aug 2002 13:06:37 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 17hyE0-0000J2-00
	for freebsd-mobile@FreeBSD.ORG; Thu, 22 Aug 2002 16:06:36 -0400
Date: Thu, 22 Aug 2002 16:06:36 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Thank you all
Message-ID: <20020822200636.GB23381@pir.net>
Reply-To: freebsd-mobile@freebsd.org
Mail-Followup-To: freebsd-mobile@FreeBSD.ORG
References: <20020822180424.GB17838@dan.emsphone.com> <200208222000.NAA05889@eskimo.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <200208222000.NAA05889@eskimo.com>
User-Agent: Mutt/1.4i
X-fish: <darwin><
X-Copy-On-Listmail: Please do NOT Cc: me on list mail.
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Ross Lippert <ripper@eskimo.com> probably said:
> Actually, there was a snag.  While I was able to get fxp detected and
> running and rebootd it and it was found many times after, it got booted
> once into winXP and after that, it seems to
> 1) hang just after fxp0 is announced
> 2) have some sort of terrible divide by 0 error just after fxp0 is
> announced.

Often with laptops you have to hard power down between running windows
and freebsd.

P.

-- 
pir                pir-sig@pir.net                 pir-sig@net.tufts.edu


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 13:28:16 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 16F8D37B400; Thu, 22 Aug 2002 13:28:11 -0700 (PDT)
Received: from foem.leiden.webweaving.org (fia224-72.dsl.hccnet.nl [62.251.72.224])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 8EAF243E75; Thu, 22 Aug 2002 13:28:10 -0700 (PDT)
	(envelope-from dirkx@webweaving.org)
Received: from foem (foem [10.11.0.2])
	by foem.leiden.webweaving.org (8.12.5/8.12.5) with ESMTP id g7MKRkoQ049009
	(version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO);
	Thu, 22 Aug 2002 22:27:47 +0200 (CEST)
	(envelope-from dirkx@webweaving.org)
Date: Thu, 22 Aug 2002 22:27:46 +0200 (CEST)
From: Dirk-Willem van Gulik <dirkx@webweaving.org>
X-X-Sender: dirkx@foem.leiden.webweaving.org
To: Ross Lippert <ripper@eskimo.com>
Cc: dnelson@allantgroup.com, <freebsd-questions@FreeBSD.ORG>,
	<freebsd-mobile@FreeBSD.ORG>
Subject: Re: Thank you all
In-Reply-To: <200208222000.NAA05889@eskimo.com>
Message-ID: <20020822222702.H48528-100000@foem.leiden.webweaving.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


> running and rebootd it and it was found many times after, it got booted
> once into winXP and after that, it seems to
> 1) hang just after fxp0 is announced

I always need to powercycle after a boot into XP; i.e. halt XP - really
take down the power and then booth FreeBSD. Somehow it leaves the
driver/pcibridge in a funny state.

Dw


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 13:48:51 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id EB5D237B400
	for <mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 13:48:48 -0700 (PDT)
Received: from loquat.bbn.com (crodrigues.bbn.com [128.89.72.49])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 522C443E81
	for <mobile@FreeBSD.ORG>; Thu, 22 Aug 2002 13:48:48 -0700 (PDT)
	(envelope-from crodrigu@bbn.com)
Received: (from crodrigu@localhost)
	by loquat.bbn.com (8.11.2/8.11.2) id g7MKmXd05159;
	Thu, 22 Aug 2002 16:48:33 -0400
Date: Thu, 22 Aug 2002 16:48:33 -0400
From: Craig Rodrigues <crodrigu@bbn.com>
To: Chip Marshall <chip@chocobo.cx>
Cc: mobile@FreeBSD.ORG
Subject: Re: Recommended PCI wireless card?
Message-ID: <20020822164833.A4911@bbn.com>
References: <20020813184655.GA27550@chocobo.cx>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <20020813184655.GA27550@chocobo.cx>; from chip@chocobo.cx on Tue, Aug 13, 2002 at 02:46:56PM -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Tue, Aug 13, 2002 at 02:46:56PM -0400, Chip Marshall wrote:
> Hi, I'm working on a little project to build a FreeBSD-based
> router/access-point, and I just thought I'd ask the list for current
> opinions on wireless solutions that work in host-ap mode. I'm looking
> for either a PCI device or a PCMCIA device and PCMCIA/PCI bridge.
> Anyone have any recommendations or even just warnings of what to stay
> away from?

You should read this article from Sysadmin Magazine,
"Configuring a FreeBSD Access Point for your WIreless Network",
by Michael S. DeGraw-Bertsch,
http://www.samag.com/documents/s=7121/sam0205a/sam0205a.htm

There are some good points raised in the article about different
wireless cards and FreeBSD.


-- 
Craig Rodrigues        Distributed Systems and Logistics, Office 6/325A
crodrigu@bbn.com       BBN Technologies, a Verizon company
(617) 873-4725         Cambridge, MA

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 16:59: 4 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id B64D437B400; Thu, 22 Aug 2002 16:59:01 -0700 (PDT)
Received: from mx1.eskimo.com (mx1.eskimo.com [204.122.16.48])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 391B543E6A; Thu, 22 Aug 2002 16:59:01 -0700 (PDT)
	(envelope-from ripper@eskimo.com)
Received: from eskimo.com (ripper@eskimo.com [204.122.16.13])
	by mx1.eskimo.com (8.9.1a/8.8.8) with ESMTP id QAA07669;
	Thu, 22 Aug 2002 16:58:47 -0700
Received: (from ripper@localhost)
	by eskimo.com (8.9.1a/8.9.1) id QAA07088;
	Thu, 22 Aug 2002 16:58:46 -0700 (PDT)
Date: Thu, 22 Aug 2002 16:58:46 -0700 (PDT)
Message-Id: <200208222358.QAA07088@eskimo.com>
From: Ross Lippert <ripper@eskimo.com>
To: dirkx@webweaving.org
Cc: dnelson@allantgroup.com, freebsd-questions@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
In-reply-to: <20020822222702.H48528-100000@foem.leiden.webweaving.org>
	(message from Dirk-Willem van Gulik on Thu, 22 Aug 2002 22:27:46 +0200
	(CEST))
Subject: Re: Thank you all
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


Power-cycle has no effect unless there is some use of the battery being
made to store something....

I got an error message:
  "disabling dynamic standby mode in EEPROM"

and that seems a little funny.  Any thoughts?



-r

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 22 17: 8:41 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id B676737B400; Thu, 22 Aug 2002 17:08:39 -0700 (PDT)
Received: from mx1.eskimo.com (mx1.eskimo.com [204.122.16.48])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id 3BB0643E86; Thu, 22 Aug 2002 17:08:39 -0700 (PDT)
	(envelope-from ripper@eskimo.com)
Received: from eskimo.com (ripper@eskimo.com [204.122.16.13])
	by mx1.eskimo.com (8.9.1a/8.8.8) with ESMTP id RAA11434;
	Thu, 22 Aug 2002 17:08:38 -0700
Received: (from ripper@localhost)
	by eskimo.com (8.9.1a/8.9.1) id RAA08153;
	Thu, 22 Aug 2002 17:08:38 -0700 (PDT)
Date: Thu, 22 Aug 2002 17:08:38 -0700 (PDT)
Message-Id: <200208230008.RAA08153@eskimo.com>
From: Ross Lippert <ripper@eskimo.com>
To: dnelson@allantgroup.com
Cc: freebsd-questions@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG,
	ripper@eskimo.com
In-reply-to: <20020822180424.GB17838@dan.emsphone.com> (message from Dan
	Nelson on Thu, 22 Aug 2002 13:04:25 -0500)
Subject: Re: Thank you all
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org


Add as it turns out

http://www.geocrawler.com/archives/3/147/2001/8/100/6497482/

Crappy fxp chips apparently cause trouble when suspend is enabled, which,
I guess, winXP was turning on when it booted.




-r

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 23  6: 5:21 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 9988937B400
	for <freebsd-mobile@FreeBSD.org>; Fri, 23 Aug 2002 06:05:09 -0700 (PDT)
Received: from abigail.blackend.org (blackend.org [212.11.50.35])
	by mx1.FreeBSD.org (Postfix) with ESMTP id BAE6843E42
	for <freebsd-mobile@FreeBSD.org>; Fri, 23 Aug 2002 06:05:07 -0700 (PDT)
	(envelope-from marc@blackend.org)
Received: from marduk.blackend.org (marduk.blackend.org [192.168.1.202])
	by abigail.blackend.org (8.12.3/8.12.3/ - 15/04/02) with ESMTP id g7ND3QKm003948
	for <freebsd-mobile@FreeBSD.org>; Fri, 23 Aug 2002 15:03:26 +0200 (CEST)
	(envelope-from marc@abigail.blackend.org)
Received: from marduk.blackend.org (localhost [127.0.0.1])
	by marduk.blackend.org (8.12.5/8.12.5) with ESMTP id g7ND5Dha000919
	for <freebsd-mobile@FreeBSD.org>; Fri, 23 Aug 2002 15:05:13 +0200 (CEST)
	(envelope-from marc@localhost.blackend.org)
Received: (from marc@localhost)
	by marduk.blackend.org (8.12.5/8.12.5/Submit) id g7ND5CXv000918
	for freebsd-mobile@FreeBSD.org; Fri, 23 Aug 2002 15:05:12 +0200 (CEST)
	(envelope-from marc)
Date: Fri, 23 Aug 2002 15:05:12 +0200
From: Marc Fonvieille <blackend@FreeBSD.org>
To: freebsd-mobile@FreeBSD.org
Subject: Similar freeze on -STABLE & -CURRENT with a laptop using O2Micro OZ6812 chip [long]
Message-ID: <20020823150512.C734@marduk.blackend.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5.1i
X-Useless-Header: blackend.org
X-Operating-System: FreeBSD 4.6-STABLE
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Hi,

I own an Acer TravelMate 507DX, the PC Card/Cardbus controller is an
O2Micro OZ6812.

In past, I had a problem with that laptop:

http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/21323
it was fixed.

Today I have a similar problem:

With 4-STABLE if I add
device pcm
in the kernel config, the laptop hangs at boot at the same place.

Here's a part of boot -v:


pccard0: <PC Card bus (classic)> on pcic0
isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000


After reading some mails on various lists, I just added
options PCI_ENABLE_IO_MODES
in the kernel (device pcm was removed) to see, I got the same freeze.


So I downloaded a -CURRENT live-cdrom and I booted on it, here's what I
got (-CURRENT from Sat Aug 17 21:35:32 GMT 2002):


pci0: <PCI bus> on pcib0
pci0: <multimedia, audio> at device 0.1 (no driver attached)
pci0: <simple comms> at device 0.2 (no driver attached)
pci0: <display, VGA> at device 2.0 (no driver attached)
cbb0: <O2Mirco OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 6.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000


I'm not an expert :)), but it seems to be the same problem.

Any advices?

Marc

PS: Here's the boot -v output of a working -STABLE kernel


Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #12: Fri Aug  9 16:48:23 CEST 2002
    marc@marduk.blackend.org:/usr/src/sys/compile/MARDUK
Calibrating clock(s) ... TSC clock: 466574612 Hz, i8254 clock: 1193181 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (466.58-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 167706624 (163776K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00368000 - 0x09fe7fff, 164102144 bytes (40064 pages)
avail memory = 159797248 (156052K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry = 0xf0210 (c00f0210)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at 0xc00f61a0
pnpbios: Entry = fa000:0  Rev = 1.0
pnpbios: Event flag at 4b0
Other BIOS signatures found:
ACPI: 000fe030
Preloaded elf kernel "kernel" at 0xc0341000.
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=71948086)
pcibios: No call entry point
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443MX host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x7194, revid=0x01
	class=06-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7195, revid=0x00
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
found->	vendor=0x8086, dev=0x7196, revid=0x00
	class=07-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
found->	vendor=0x10c8, dev=0x0004, revid=0x01
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base 0c000000, size 24
	map[14]: type 1, range 32, base 0b400000, size 21
	map[18]: type 1, range 32, base 0b300000, size 20
found->	vendor=0x1217, dev=0x6872, revid=0x05
	class=06-07-00, hdrtype=0x02, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
found->	vendor=0x8086, dev=0x7198, revid=0x01
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7199, revid=0x00
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 00008000, size  4
found->	vendor=0x8086, dev=0x719a, revid=0x00
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=10
	map[20]: type 1, range 32, base 00007cc0, size  5
found->	vendor=0x8086, dev=0x719b, revid=0x00
	class=06-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[90]: type 1, range 32, base 0000f100, size  4
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x7195) at 0.1 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x7196) at 0.2 irq 11
pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 2.0 irq 5
pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 6.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
pcic0: PCI Configuration space:
  0x00: 0x68721217 0x04100007 0x06070005 0x00022000 
  0x10: 0x88000000 0x020000a0 0x00000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000001 
  0x30: 0x00000001 0x00000001 0x00000001 0x04a0010b 
  0x40: 0x100b1025 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00071c02 
  0x90: 0x00000002 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e020001 0x00c04000 0x00000012 0x0000000d 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card bus (classic)> on pcic0
isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI 14 eb
ata0-master: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x8008
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82443MX USB controller> port 0x7cc0-0x7cdf irq 10 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82443MX Power management controller> port 0xf100-0xf10f at device 7.3 on pci0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic2: not probed (disabled)
sio0: irq maps: 0x841 0x851 0x851 0x851
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x841 0x841 0x841 0x841
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
pcic0: Event mask 0x6
BIOS Geometries:
 0:024efe3f 0..590=591 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c440, tty 631892, net 671892
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 1 int is 90 stat is 7f
pccard: card removed, slot 0
ar: FreeBSD check1 failed
ad0: <IBM-DARA-206000/AR1OA51A> ATA-4 disk at ata0-master
ad0: 4645MB (9514260 sectors), 10068 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <CD-224E/1.5A> CDROM drive at ata0 as slave
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-DA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 9510479, size 9510417 : OK
start_init: trying /sbin/init
pcic0: reset 1 int is 90 stat is 7f
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 2 int is f0 stat is 5f
pcic0: reset 3 int is f0 stat is 5f
pcic0: reset 0 
splash: image decoder found: rain_saver
Linux ELF exec handler installed
pccard0: Assigning ed0: io 0x240-0x25f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-25f
ed0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-25f
ed0 at port 0x240-0x25f irq 11 flags 0x80000 slot 0 on pccard0
pcic: I/O win 0 flags 15 240-25f
ed0: Forcing IRQ to 11
	using shared irq11.
bpf: ed0 attached
ed0: address 00:e0:98:7a:f5:61, type Linksys (16 bit) 
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x0010dd, model 0x0001, rev. 2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: device timeout
pcic0: Event mask 0x8

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 23  7:22:23 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP
	id 21C2C37B405; Fri, 23 Aug 2002 07:21:47 -0700 (PDT)
Received: from smtp3.southeast.rr.com (smtp3.southeast.rr.com [24.93.67.84])
	by mx1.FreeBSD.org (Postfix) with ESMTP
	id EA97043E91; Fri, 23 Aug 2002 07:21:45 -0700 (PDT)
	(envelope-from morganw@chemikals.org)
Received: from mail7.sc.rr.com (fe7 [24.93.67.54])
	by smtp3.southeast.rr.com (8.12.5/8.12.2) with ESMTP id g7NELQga009927;
	Fri, 23 Aug 2002 10:21:27 -0400 (EDT)
Received: from volatile.chemikals.org ([24.88.49.48]) by mail7.sc.rr.com  with Microsoft SMTPSVC(5.5.1877.757.75);
	 Fri, 23 Aug 2002 10:21:43 -0400
Date: Fri, 23 Aug 2002 10:21:43 -0400 (EDT)
From: Wesley Morgan <morganw@chemikals.org>
To: Marc Fonvieille <blackend@freebsd.org>
Cc: freebsd-mobile@freebsd.org
Subject: Re: Similar freeze on -STABLE & -CURRENT with a laptop using O2Micro
 OZ6812 chip [long]
In-Reply-To: <20020823150512.C734@marduk.blackend.org>
Message-ID: <20020823102041.I7506-100000@volatile.chemikals.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

Insert the module after booting. I had (have) the same problem with my
Toshiba Sat Pro 6k. The sound device will be properly detected when I load
the module post-boot. However, it still doesnt WORK (although for ONE
single boot it _did_ work)

On Fri, 23 Aug 2002, Marc Fonvieille wrote:

> Hi,
>
> I own an Acer TravelMate 507DX, the PC Card/Cardbus controller is an
> O2Micro OZ6812.
>
> In past, I had a problem with that laptop:
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/21323
> it was fixed.
>
> Today I have a similar problem:
>
> With 4-STABLE if I add
> device pcm
> in the kernel config, the laptop hangs at boot at the same place.
>
> Here's a part of boot -v:
>
>
> pccard0: <PC Card bus (classic)> on pcic0
> isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000
>
>
> After reading some mails on various lists, I just added
> options PCI_ENABLE_IO_MODES
> in the kernel (device pcm was removed) to see, I got the same freeze.
>
>
> So I downloaded a -CURRENT live-cdrom and I booted on it, here's what I
> got (-CURRENT from Sat Aug 17 21:35:32 GMT 2002):
>
>
> pci0: <PCI bus> on pcib0
> pci0: <multimedia, audio> at device 0.1 (no driver attached)
> pci0: <simple comms> at device 0.2 (no driver attached)
> pci0: <display, VGA> at device 2.0 (no driver attached)
> cbb0: <O2Mirco OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 6.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000
>
>
> I'm not an expert :)), but it seems to be the same problem.
>
> Any advices?
>
> Marc
>
> PS: Here's the boot -v output of a working -STABLE kernel
>
>
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 4.6-STABLE #12: Fri Aug  9 16:48:23 CEST 2002
>     marc@marduk.blackend.org:/usr/src/sys/compile/MARDUK
> Calibrating clock(s) ... TSC clock: 466574612 Hz, i8254 clock: 1193181 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254"  frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> CPU: Pentium II/Pentium II Xeon/Celeron (466.58-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
>   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory  = 167706624 (163776K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009efff, 647168 bytes (158 pages)
> 0x00368000 - 0x09fe7fff, 164102144 bytes (40064 pages)
> avail memory = 159797248 (156052K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f0280
> bios32: Entry = 0xf0210 (c00f0210)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0x0
> pnpbios: Found PnP BIOS data at 0xc00f61a0
> pnpbios: Entry = fa000:0  Rev = 1.0
> pnpbios: Event flag at 4b0
> Other BIOS signatures found:
> ACPI: 000fe030
> Preloaded elf kernel "kernel" at 0xc0341000.
> Pentium Pro MTRR support enabled
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=71948086)
> pcibios: No call entry point
> apm0: <APM BIOS> on motherboard
> apm: found APM BIOS v1.2, connected at v1.2
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Intel 82443MX host to PCI bridge> on motherboard
> found->	vendor=0x8086, dev=0x7194, revid=0x01
> 	class=06-00-00, hdrtype=0x00, mfdev=1
> 	subordinatebus=0 	secondarybus=0
> found->	vendor=0x8086, dev=0x7195, revid=0x00
> 	class=04-01-00, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	intpin=b, irq=11
> found->	vendor=0x8086, dev=0x7196, revid=0x00
> 	class=07-03-00, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	intpin=b, irq=11
> found->	vendor=0x10c8, dev=0x0004, revid=0x01
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	intpin=a, irq=5
> 	map[10]: type 1, range 32, base 0c000000, size 24
> 	map[14]: type 1, range 32, base 0b400000, size 21
> 	map[18]: type 1, range 32, base 0b300000, size 20
> found->	vendor=0x1217, dev=0x6872, revid=0x05
> 	class=06-07-00, hdrtype=0x02, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	intpin=a, irq=11
> found->	vendor=0x8086, dev=0x7198, revid=0x01
> 	class=06-01-00, hdrtype=0x00, mfdev=1
> 	subordinatebus=0 	secondarybus=0
> found->	vendor=0x8086, dev=0x7199, revid=0x00
> 	class=01-01-80, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	map[20]: type 1, range 32, base 00008000, size  4
> found->	vendor=0x8086, dev=0x719a, revid=0x00
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	intpin=d, irq=10
> 	map[20]: type 1, range 32, base 00007cc0, size  5
> found->	vendor=0x8086, dev=0x719b, revid=0x00
> 	class=06-80-00, hdrtype=0x00, mfdev=0
> 	subordinatebus=0 	secondarybus=0
> 	map[90]: type 1, range 32, base 0000f100, size  4
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x8086, dev=0x7195) at 0.1 irq 11
> pci0: <unknown card> (vendor=0x8086, dev=0x7196) at 0.2 irq 11
> pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 2.0 irq 5
> pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 6.0 on pci0
> pcic0: PCI Memory allocated: 0x88000000
> pcic0: Warning: O2micro OZ68xx chips may not work
> pcic0: PCI Configuration space:
>   0x00: 0x68721217 0x04100007 0x06070005 0x00022000
>   0x10: 0x88000000 0x020000a0 0x00000000 0x00000000
>   0x20: 0x00000000 0x00000000 0x00000000 0x00000001
>   0x30: 0x00000001 0x00000001 0x00000001 0x04a0010b
>   0x40: 0x100b1025 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x00000000 0x00000000 0x00000000 0x00071c02
>   0x90: 0x00000002 0x00000000 0x00000000 0x00000000
>   0xa0: 0x7e020001 0x00c04000 0x00000012 0x0000000d
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pccard0: <PC Card bus (classic)> on pcic0
> isab0: <Intel 82443MX PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000
> ata0: mask=03 ostat0=50 ostat2=00
> ata0-slave: ATAPI 14 eb
> ata0-master: ATAPI 00 00
> ata0: mask=03 stat0=50 stat1=00
> ata0-master: ATA 01 a5
> ata0: devices=09
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x8008
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82443MX USB controller> port 0x7cc0-0x7cdf irq 10 at device 7.2 on pci0
> usb0: <Intel 82443MX USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> chip1: <Intel 82443MX Power management controller> port 0xf100-0xf10f at device 7.3 on pci0
> ata-: ata0 exists, using next available unit number
> ata-: ata1 exists, using next available unit number
> pcic-: pcic0 exists, using next available unit number
> pcic-: pcic1 exists, using next available unit number
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ata2 failed to probe at port 0x1f0 irq 14 on isa0
> ata3 failed to probe at port 0x170 irq 15 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: current command byte:0065
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000000, packet size:3
> psm0: syncmask:c0, syncbits:00
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic2: not probed (disabled)
> sio0: irq maps: 0x841 0x851 0x851 0x851
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: irq maps: 0x841 0x841 0x841 0x841
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: EPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> plip0: <PLIP network interface> on ppbus0
> bpf: lp0 attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> isa_probe_children: probing PnP devices
> pcic0: Event mask 0x6
> BIOS Geometries:
>  0:024efe3f 0..590=591 cylinders, 0..254=255 heads, 1..63=63 sectors
>  0 accounted for
> Device configuration finished.
> bpf: lo0 attached
> bpf: ppp0 attached
> new masks: bio 68c440, tty 631892, net 671892
> ad0: DMA limited to UDMA33, non-ATA66 cable or device
> ad0: success setting UDMA2 on Intel chip
> Creating DISK ad0
> pcic0: Autodetected 5.0V card
> pccard: card inserted, slot 0
> pcic0: reset 1 int is 90 stat is 7f
> pccard: card removed, slot 0
> ar: FreeBSD check1 failed
> ad0: <IBM-DARA-206000/AR1OA51A> ATA-4 disk at ata0-master
> ad0: 4645MB (9514260 sectors), 10068 C, 15 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA33
> ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
> ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
> ata0-slave: success setting PIO4 on generic chip
> acd0: <CD-224E/1.5A> CDROM drive at ata0 as slave
> acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
> acd0: Reads: CD-R, CD-DA stream
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> Mounting root from ufs:/dev/ad0s1a
> ad0s1: type 0xa5, start 63, end = 9510479, size 9510417 : OK
> start_init: trying /sbin/init
> pcic0: reset 1 int is 90 stat is 7f
> pcic0: Autodetected 5.0V card
> pccard: card inserted, slot 0
> pcic0: reset 2 int is f0 stat is 5f
> pcic0: reset 3 int is f0 stat is 5f
> pcic0: reset 0
> splash: image decoder found: rain_saver
> Linux ELF exec handler installed
> pccard0: Assigning ed0: io 0x240-0x25f irq 11 mem 0x0-0xffffffff
> pcic: I/O win 0 flags 15 240-25f
> ed0: Forcing IRQ to 11
> pcic: I/O win 0 flags 5 240-25f
> ed0 at port 0x240-0x25f irq 11 flags 0x80000 slot 0 on pccard0
> pcic: I/O win 0 flags 15 240-25f
> ed0: Forcing IRQ to 11
> 	using shared irq11.
> bpf: ed0 attached
> ed0: address 00:e0:98:7a:f5:61, type Linksys (16 bit)
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: OUI 0x0010dd, model 0x0001, rev. 2
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ed0: device timeout
> pcic0: Event mask 0x8
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
>

-- 
                                           _ __ ___ ____  ___ ___ ___
          Wesley N Morgan                       _ __ ___ | _ ) __|   \
          morganw@chemikals.org                     _ __ | _ \._ \ |) |
          FreeBSD: The Power To Serve                  _ |___/___/___/
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 23  7:55:15 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 07B1137B400
	for <freebsd-mobile@freebsd.org>; Fri, 23 Aug 2002 07:55:14 -0700 (PDT)
Received: from abigail.blackend.org (blackend.org [212.11.50.35])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 62E6E43E6A
	for <freebsd-mobile@freebsd.org>; Fri, 23 Aug 2002 07:55:12 -0700 (PDT)
	(envelope-from marc@blackend.org)
Received: from marduk.blackend.org (marduk.blackend.org [192.168.1.202])
	by abigail.blackend.org (8.12.3/8.12.3/ - 15/04/02) with ESMTP id g7NEs2Km004333;
	Fri, 23 Aug 2002 16:54:02 +0200 (CEST)
	(envelope-from marc@abigail.blackend.org)
Received: from marduk.blackend.org (localhost [127.0.0.1])
	by marduk.blackend.org (8.12.5/8.12.5) with ESMTP id g7NEtnha001331;
	Fri, 23 Aug 2002 16:55:49 +0200 (CEST)
	(envelope-from marc@localhost.blackend.org)
Received: (from marc@localhost)
	by marduk.blackend.org (8.12.5/8.12.5/Submit) id g7NEtmEJ001330;
	Fri, 23 Aug 2002 16:55:48 +0200 (CEST)
	(envelope-from marc)
Date: Fri, 23 Aug 2002 16:55:48 +0200
From: Marc Fonvieille <blackend@freebsd.org>
To: Wesley Morgan <morganw@chemikals.org>
Cc: freebsd-mobile@freebsd.org
Subject: Re: Similar freeze on -STABLE & -CURRENT with a laptop using O2Micro OZ6812 chip [long]
Message-ID: <20020823165547.A1032@marduk.blackend.org>
References: <20020823150512.C734@marduk.blackend.org> <20020823102041.I7506-100000@volatile.chemikals.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5.1i
In-Reply-To: <20020823102041.I7506-100000@volatile.chemikals.org>; from morganw@chemikals.org on Fri, Aug 23, 2002 at 10:21:43AM -0400
X-Useless-Header: blackend.org
X-Operating-System: FreeBSD 4.6-STABLE
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Fri, Aug 23, 2002 at 10:21:43AM -0400, Wesley Morgan wrote:
> Insert the module after booting. I had (have) the same problem with my
> Toshiba Sat Pro 6k. The sound device will be properly detected when I load
> the module post-boot. However, it still doesnt WORK (although for ONE
> single boot it _did_ work)
>

Well it's not just a sound detection problem, as I said it hangs without
sound, but I really miss sound :)

Marc

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 23 12:24:14 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id E566737B401
	for <mobile@freebsd.org>; Fri, 23 Aug 2002 12:24:04 -0700 (PDT)
Received: from oneplusone.ch (oneplusone.ch [212.55.208.170])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 9D97043E6E
	for <mobile@freebsd.org>; Fri, 23 Aug 2002 12:24:03 -0700 (PDT)
	(envelope-from ast@marabu.ch)
Received: (from uucp@localhost)
	by oneplusone.ch (8.11.4/8.11.3) with UUCP id g7NJO2V85531
	for mobile@freebsd.org; Fri, 23 Aug 2002 21:24:02 +0200 (MEST)
	(envelope-from ast@marabu.ch)
Received: from marabu.marabu.ch (marabu.marabu.ch [192.168.21.3])
	by marabu.ch (8.11.6/8.11.6) with ESMTP id g7NJNNG74912
	for <mobile@freebsd.org>; Fri, 23 Aug 2002 21:23:24 +0200 (MEST)
	(envelope-from ast@marabu.ch)
Received: by marabu.marabu.ch (8.7.5/20001028-ast-8.3) id VAA16307; Fri, 23 Aug 2002 21:23:22 +0200 (CEST)
Message-Id: <200208231923.VAA16307@marabu.marabu.ch>
MIME-Version: 1.0 (NeXT Mail 3.3 v124.8483.6)
Content-Type: text/plain
X-Nextstep-Mailer: Mail 3.3 (Enhance 2.0b6)
Received: by NeXT.Mailer (1.124.8483.6)
From: Adrian Steinmann <ast@marabu.ch>
Date: Fri, 23 Aug 2002 21:23:20 +0200
To: mobile@freebsd.org
Subject: rarpd on laptops doesn't find interfaces, fix at
	http://www.webgroup.ch/ast/rarpd/
X-Organization: Steinmann Consulting, Apollostrasse 21, 8032 Zurich
X-Phone-Numbers: Switzerland, Tel +41 1 380 30 83 Fax +41 1 380 30 85
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

FreeBSD rarpd returns "no interfaces" on say, laptops, which have
removable Ethernet NICs.

This can be corrected by replacing the SIOCGIFCONF ioctl() in the
init() routine with getifaddrs(). OpenBSD rarpd.c (version 1.29)
does it this way and hence I ported that version to -stable
retrofitting the few extra options we support under FreeBSD.

This directory contains the ported rarpd.c and modified manpages
as well as the original OpenBSD and FreeBSD versions.

This has been tested on IBM ThinkPAD laptops with ep and xe PCMCIA
network cards on -stable (to netboot Sun systems;-).

I've submited this change request and it's filed under

    http://www.freebsd.org/cgi/query-pr.cgi?pr=40957

I'd be very much obliged if someone would review it and possibly
commit it to our tree for 4.7 and 5.

Adrian

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 23 23: 5:31 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 9265937B400
	for <freebsd-mobile@freebsd.org>; Fri, 23 Aug 2002 23:05:28 -0700 (PDT)
Received: from web9704.mail.yahoo.com (web9704.mail.yahoo.com [216.136.129.140])
	by mx1.FreeBSD.org (Postfix) with SMTP id 4674543E6A
	for <freebsd-mobile@freebsd.org>; Fri, 23 Aug 2002 23:05:28 -0700 (PDT)
	(envelope-from kjerstes@yahoo.com)
Message-ID: <20020824060528.73087.qmail@web9704.mail.yahoo.com>
Received: from [141.154.39.90] by web9704.mail.yahoo.com via HTTP; Fri, 23 Aug 2002 23:05:28 PDT
Date: Fri, 23 Aug 2002 23:05:28 -0700 (PDT)
From: c/o Peter Gatsoulis <kjerstes@yahoo.com>
Reply-To: pg@eth1.com
Subject: duped laptop disk not bootable
To: freebsd-mobile@freebsd.org
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

any advice on the following

just duped a laptop disk with dump|restore

put it into new notebook

i get invalid partition
i get the 1st stage boot prompt with boot failure
message and the expected default that failed 
0:ad(0,a)/boot/loader

the duped drive has the FBSD slice as ad0s1e

if i say at this point

0:ad(0,e)/boot/loader  OR if i say;
0:ad(0,e)/kernel

i can boot to my custom compiled kernel
sometimes BUT NOT always i can boot with just saying;

0:ad(0,e)

i have tried making a boot.config, then a boot.conf
file with 0:ad(0,e)/boot/loader in there

doesn't work, i still have to boot it manually by
saying the exact same thing as above

i've tried putting a reference in loader.conf to try
to get the loader to reckognize boot.config by just
specifying the file name /boot/config in loader.conf
but maybe i don't have the right syntax

even tried doing a disklabel -B /dev/ad0s1, i thought
maybe there weren't any boot blocks, 
tried disklabel -w -B also

tried editing the disklabel disklabel -e ad0
and tried changing the partition label from e to a but
even as root the system wouldn't lemme write to the
disk when editing i finished

fresh out of ideas, anyone know how to do this so it
boots by itself again? HOW/where DO I SPECIFY THAT ad0
s1e, is the right place to boot from with out doing
this manually each and every time?

i haven't tried doing anything w/ boot0cfg but i
figure i'm past that point anyways if i get to where
i'm now getting to..


__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24  9:52:47 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 736D837B400
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 09:52:46 -0700 (PDT)
Received: from rip.psg.com (rip.psg.com [147.28.0.39])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 17F7843E3B
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 09:52:46 -0700 (PDT)
	(envelope-from randy@psg.com)
Received: from localhost ([127.0.0.1] helo=rip.psg.com.psg.com)
	by rip.psg.com with esmtp (Exim 4.10)
	id 17ie9V-0002aC-00
	for freebsd-mobile@freebsd.org; Sat, 24 Aug 2002 09:52:45 -0700
From: Randy Bush <randy@psg.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: FreeBSD Laptoppers <freebsd-mobile@freebsd.org>
Subject: GPRS PPP
Message-Id: <E17ie9V-0002aC-00@rip.psg.com>
Date: Sat, 24 Aug 2002 09:52:45 -0700
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

i use gprs for ppp connectivity.  as i roam both nationally and
internationally, i need to find gprs params for different carriers
etc.  i have been unable to find such info on the web.  if you know
of it, please tell me.

in the meantime, i am starting to accumulate such a page, see
<http://www.psg.com/~randy/gprs-ppp.html>.  i would *really*
appreciate additions to it, especially carrier parameters, urgently
for UK, NL, DE, FR, and GR carriers.

please send data, suggestions, corrections, ... to me via email.
thanks.

randy


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 11:34:41 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 4833437B400
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 11:34:39 -0700 (PDT)
Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143])
	by mx1.FreeBSD.org (Postfix) with ESMTP id BE17443E65
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 11:34:38 -0700 (PDT)
	(envelope-from mavery@pop.myrealbox.com)
Received: from speedy mavery@smtp-send.myrealbox.com [205.229.168.203]
	by smtp-send.myrealbox.com with NetMail SMTP Agent $Revision:   3.11  $ on Novell NetWare;
	Sat, 24 Aug 2002 12:34:40 -0600
From: "Mike Avery" <mavery@myrealbox.com>
To: freebsd-mobile@freebsd.org
Date: Sat, 24 Aug 2002 12:34:08 -0600
MIME-Version: 1.0
Subject: BSD 4.6, X, and Savage IX w/MV woes
Message-ID: <3D677D40.13121.4FAB070@localhost>
X-mailer: Pegasus Mail for Windows (v4.02)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Content-description: Mail message body
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

I'm trying to get my Toshiba 2755 laptop running with 
FreeBSD 4.6.  Sadly, I bought this machine before I 
was thinking about running FreeBSD on a laptop.  

In any case, I can't find any drivers that get the 
Savage IX w/MV working with X.  I've tried all the 
reasonable sounding drivers that were included, and so 
far all I get is a message that tells me something like, 
"it seems the x-setup failed, would you like to try 
again".

A check with (sorry) RedHat 7.3 on the machine shows 
it thinks the video card is a S3 86C270-294 IX-MV (rev 
11), in case that helps.  (Red Hat chokes on the Cisco 
PCM340 Card in the laptop.  There is no joy in mudville.  
While I'd rather have FreeBSD working on the machine, 
my main goal is to get Microsoft OFF the machine.)

I'd appreciate any pointers, tips, or answers you can 
share.  I've been rt'ing the fm, and cursing google until 
my eyes cross.... so far, no joy.  

Thanks,
Mike
-- 
Mike Avery                            
MAvery@mail.otherwhen.com
ICQ: 16241692                      AOL IM:MAvery81230
Phone: 970-642-0282
* Spam is for lusers who can't get business any other 
way *

A Randomly Selected Thought For The Day:
    Efficiency is a highly developed form of laziness.




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 13: 9:36 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id B890137B401
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 13:09:19 -0700 (PDT)
Received: from mta01.fuse.net (mx1.fuse.net [216.68.2.90])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 4F7E143E72
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 13:09:18 -0700 (PDT)
	(envelope-from mistry.7@osu.edu)
Received: from bigguy.am-productions.biz ([216.196.152.131])
          by mta01.fuse.net
          (InterMail vM.5.01.03.01 201-253-122-118-101-20010319) with ESMTP
          id <20020824200806.CYFX3813.mta01.fuse.net@bigguy.am-productions.biz>
          for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 16:08:06 -0400
Content-Type: text/plain;
  charset="us-ascii"
From: Anish Mistry <mistry.7@osu.edu>
To: freebsd-mobile@freebsd.org
Subject: Fujitsu P2000 (2110) USB Problem
Date: Sat, 24 Aug 2002 16:10:42 -0400
User-Agent: KMail/1.4.2
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Message-Id: <200208241610.42334.mistry.7@osu.edu>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

  I am having a problem getting any sort of USB device to work with my Fu=
jitsu=20
P2000 notebook.  The USB works correctly in window 2000 so I know that th=
e=20
hardware is ok.
  The problem is that I can plug in a USB device ie. a floppy drive and a=
=20
little kernel message appears notifying me that it is plugged in, but the=
n I=20
am not able to mount it.  Then I try my USB Visor.  Plug it in press the=20
button, device message shows up, but can't communicate with the device.  =
Not=20
being one to give up I recompiled my kernel for rio mp3 player support. =20
installed rioutil and tryed again.  Plug it in, device shows up as rio0, =
but=20
when I try to query information from it: rioutil -i.  It just hangs and I=
=20
have to [ctl]-c it.
   I've pasted my dmesg below.  Is there anything else that I can send th=
at=20
would help?  I don't have any problems with coding if it comes to that. =20
Thanks.

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #9: Sat Aug 24 14:28:54 EDT 2002
    root@littleguy.am-productions.biz:/usr/obj/usr/src/sys/LITTLEGUY
Timecounter "i8254"  frequency 1193182 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (713.25-MHz 586-class CPU)
  Origin =3D "GenuineTMx86"  Id =3D 0x543
real memory  =3D 251527168 (245632K bytes)
avail memory =3D 240992256 (235344K bytes)
Preloaded elf kernel "kernel" at 0xc03c0000.
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=3D0x1279, dev=3D0x0396) at 0.1
pci0: <unknown card> (vendor=3D0x1279, dev=3D0x0397) at 0.2
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfc004000-0xfc004=
fff=20
irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq =
9 at=20
device 4.0 on pci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUN=
C pci=20
int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
atapci0: <AcerLabs Aladdin ATA66 controller> port 0x1800-0x180f irq 0 at=20
device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xfc007800-0xfc00=
78ff=20
irq 9 at device 16.0 on pci0
rl0: Ethernet address: 00:e0:00:ae:45:08
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x104c, dev=3D0x8026) at 19.0 irq 9
pci0: <ATI RageMobility-P/M graphics accelerator> at 20.0 irq 9
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA66
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2212> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
LongRun: Transmeta Crusoe series CPU's power management feature

  LongRun mode: 1  533MHz 1100mV 41%can't re-use a leaf (longrun)!
can't re-use a leaf (frequency)!
can't re-use a leaf (voltage)!
can't re-use a leaf (percentage)!
umass0: NEC NEC USB UF000x, rev 1.10/1.21, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <NEC USB UF000x 1.21> Removable Direct Access SCSI-0 device
da0: 20KB/s transfers
da0: 1MB (2880 512 byte sectors: 2H 18S/T 80C)
umass0: Unsupported UFI command 0x08, 6 byte command should have been=20
converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi=
 status=20
=3D=3D 0x0

--=20
Anish Mistry


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 15: 7:21 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 0474A37B400
	for <FreeBSD-Mobile@FreeBSD.org>; Sat, 24 Aug 2002 15:07:17 -0700 (PDT)
Received: from mail.lambertfam.org (www.lambertfam.org [216.223.196.6])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 7450243E3B
	for <FreeBSD-Mobile@FreeBSD.org>; Sat, 24 Aug 2002 15:07:16 -0700 (PDT)
	(envelope-from lambert@lambertfam.org)
Received: from localhost.localdomain (localhost [127.0.0.1])
	by localhost.inch.com (Postfix) with ESMTP
	id 538AD35132; Sat, 24 Aug 2002 18:03:59 -0400 (EDT)
Received: from laptop.lambertfam.org (laptop.int.lambertfam.org [10.1.0.2])
	by mail.lambertfam.org (Postfix) with ESMTP
	id 4F151350BF; Sat, 24 Aug 2002 18:03:54 -0400 (EDT)
Received: by laptop.lambertfam.org (Postfix, from userid 1000)
	id 6C10028B09; Sat, 24 Aug 2002 18:07:05 -0400 (EDT)
Date: Sat, 24 Aug 2002 18:07:05 -0400
From: Scott Lambert <lambert@lambertfam.org>
To: Mike Avery <mavery@myrealbox.com>, FreeBSD-Mobile@FreeBSD.org
Subject: Re: BSD 4.6, X, and Savage IX w/MV woes
Message-ID: <20020824220705.GA9746@laptop.lambertfam.org>
Reply-To: FreeBSD-Mobile@FreeBSD.org
Mail-Followup-To: FreeBSD-Mobile@FreeBSD.org
References: <3D677D40.13121.4FAB070@localhost>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <3D677D40.13121.4FAB070@localhost>
User-Agent: Mutt/1.4i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Sat, Aug 24, 2002 at 12:34:08PM -0600, Mike Avery wrote:
> I'm trying to get my Toshiba 2755 laptop running with 
> FreeBSD 4.6.  Sadly, I bought this machine before I 
> was thinking about running FreeBSD on a laptop.  

That's ok, it will probably work just fine.
 
> In any case, I can't find any drivers that get the 
> Savage IX w/MV working with X.  I've tried all the 
> reasonable sounding drivers that were included, and so 
> far all I get is a message that tells me something like, 
> "it seems the x-setup failed, would you like to try 
> again".

That sounds like the Savage chip that is in my Toshiba 2805 and which
has been working perfectly ever since XFree86 4.0.1.  Make sure you 
installed XFree86 4.x and *not* XFree86 3.x.  3.x doesn't work with 
the Savage IX/MV.  BTW, this is an XFree86 issue you are having,
it's not FreeBSD's fault. :-)  XFree68 will work for you once we get 
the magic incantations right.  Don't dispare.

From my /var/log/XFree86.0.log (Check your log file.  You may find the cause 
of your problems in there.)
(--) PCI:*(1:0:0) S3 Savage/IX-MV rev 17, Mem @ 0xf0000000/27, BIOS @ 0x000c0000/16

> A check with (sorry) RedHat 7.3 on the machine shows 
> it thinks the video card is a S3 86C270-294 IX-MV (rev 
> 11), in case that helps.  (Red Hat chokes on the Cisco 
> PCM340 Card in the laptop.  There is no joy in mudville.  
> While I'd rather have FreeBSD working on the machine, 
> my main goal is to get Microsoft OFF the machine.)

I haven't tried a Cisco card yet.  But I've seen reports of success.
I wiped Windows off this machine the day after I bought it.
 
> I'd appreciate any pointers, tips, or answers you can 
> share.  I've been rt'ing the fm, and cursing google until 
> my eyes cross.... so far, no joy.  

I don't know how different the 2755 is from the 2805, but you might at 
least want to try snarfing my XFree86 config file from:

http://www.LambertFam.org/~lambert/laptop/

Look at some of the other stuff, it may apply to your Toshiba as well.

Good luck!

-- 
Scott Lambert                    KC5MLE                       Unix SysAdmin
lambert@lambertfam.org      

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 15:34: 7 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 87A3437B400
	for <mobile@FreeBSD.ORG>; Sat, 24 Aug 2002 15:34:03 -0700 (PDT)
Received: from bobj.dyndns.org (cpe-gan-68-101-90-216-cmcpe.ncf.coxexpress.com [68.101.90.216])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 959B543E72
	for <mobile@FreeBSD.ORG>; Sat, 24 Aug 2002 15:34:01 -0700 (PDT)
	(envelope-from bob88@garbonzo.hos.ufl.edu)
Received: from garbonzo.hos.ufl.edu (localhost [127.0.0.1])
	by bobj.dyndns.org (8.11.4/8.11.4) with ESMTP id g7OMVte00685;
	Sat, 24 Aug 2002 18:32:25 -0400 (EDT)
	(envelope-from bob88@garbonzo.hos.ufl.edu)
Message-ID: <3D68095B.3000106@garbonzo.hos.ufl.edu>
Date: Sat, 24 Aug 2002 18:31:55 -0400
From: Bob Johnson <bob88@garbonzo.hos.ufl.edu>
User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc3) Gecko/20020601
X-Accept-Language: en-us, en, eo
MIME-Version: 1.0
To: Bruce M Simpson <bms@spc.org>
Cc: Kevin Oberman <oberman@es.net>, mobile@FreeBSD.ORG
Subject: Re: Use of USB "Disk on a key" devices
References: <20020811235053.2E7935D04@ptavv.es.net> <20020813100445.GJ23205@spc.org>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org



Bruce M Simpson wrote:
> Kevin,
> 
> I purchased an 8Mb DiskOnKey device last week from PC World here in
> London for 10 GBP kast Thursday. I attempted to get the device to work
> simply byhacking its VID and PID into /src/sys/dev/usb/umass.c, but no joy.

Assuming it is similar to the two USB flash drives I've played with,
you need to hack /src/sys/cam/scsi/scsi_da.c to tell the scsi driver
about the capabilities of your device.

When you plug the device in to your system, it should be recognized.
with a log message something like

Aug 20 22:56:06 bobj /kernel: da0: <TREK2000 TD-G2 W1.1> Removable Direct Access SCSI-0 device

 From that I generated an entry in scsi_da.c that looks like this:

         {
                 /* Trek ThumbDrive Smart - another USB flash drive */
                 {T_DIRECT, SIP_MEDIA_REMOVABLE, "TREK2000", "TD-G2", "*"},
                 /*quirks*/ DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE
         }

then I rebuilt and reinstalled my kernel and it worked.

You can use wildcards to allow one entry to cover a number of devices,
e.g. my first effort used the line

                {T_DIRECT, SIP_MEDIA_REMOVABLE, "TREK*", "*","*"},

which would work with just about any device from TREK. Now that I think about
it, I probably should be using

                {T_DIRECT, SIP_MEDIA_REMOVABLE, "TREK2000", "TD*","*"},

to pick up all models of the ThumbDrive, but that's a guess.

> 
> The device appears to be a BBB/SCSI-transparent one according to its
> configuration descriptor. After attempting to attach CAM, commands time out
> and are then refused - the device does not respond to SCSI_INQUIRY.

IIRC, my drive behaved similarly until I patched the driver.

The USB flash drives seem to universally implement an instruction set
that supports neither 6 byte commands nor cache sync. The "quirks"
entry tells the scsi driver not to use those commands. A device that
did not have any special quirks wouldn't need an entry in scsi_da.c

- Bob
> 
> There are a few further tips and tricks which I can perform, such as 6-byte
> command conversion within the SCSI stack. I will probably attempt to pin
> down further details of why the device isn't responding; I will be sure to
> let you know.
> 
> BMS
> 
> On Sun, Aug 11, 2002 at 04:50:53PM -0700, Kevin Oberman wrote:
> 
>>There are several vendors supplying solid-state USB "disk" drives of
>>between 8 MB and 512 MB. They claim to operate as USB disk drives and
>>require no drivers for Windows (newer than 98), Mac OS (9 and newer),
>>and Linux (with USB support). They come from several manufacturers
>>including TrekStor, Sandisk, EasyDisk, JMTek, Sony, SimpleTech, and
>>DiskOnKey (M-Systems).
>>
>>Has anyone used one of these devices and can they confirm whether or
>>not any particular brand works well? I've seen one report that one did
>>not work, but that's it.
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 18:48:23 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 09C7637B400
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 18:48:16 -0700 (PDT)
Received: from mta03.fuse.net (mx3.fuse.net [216.68.1.123])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 148EC43E72
	for <freebsd-mobile@freebsd.org>; Sat, 24 Aug 2002 18:48:15 -0700 (PDT)
	(envelope-from mistry.7@osu.edu)
Received: from bigguy.am-productions.biz ([216.196.152.131])
          by mta03.fuse.net
          (InterMail vM.5.01.03.01 201-253-122-118-101-20010319) with ESMTP
          id <20020825014912.FBYL5686.mta03.fuse.net@bigguy.am-productions.biz>;
          Sat, 24 Aug 2002 21:49:12 -0400
Content-Type: text/plain;
  charset="iso-8859-1"
From: Anish Mistry <mistry.7@osu.edu>
To: gburditt@airmail.net
Subject: Re: Fujitsu P2000 (2110) USB Problem
Date: Sat, 24 Aug 2002 21:50:55 -0400
User-Agent: KMail/1.4.2
References: <E17iikN-0006xU-00@gerbil.hammy.lonestar.org>
In-Reply-To: <E17iikN-0006xU-00@gerbil.hammy.lonestar.org>
Cc: freebsd-mobile@freebsd.org
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Message-Id: <200208242150.55366.mistry.7@osu.edu>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On Saturday 24 August 2002 05:47 pm, Gordon Burditt,Here,11,817 249-4898=20
wrote:
> >  I am having a problem getting any sort of USB device to work with my=
=20
Fujitsu=20
> >P2000 notebook.  The USB works correctly in window 2000 so I know that=
 the=20
> >hardware is ok.
> >  The problem is that I can plug in a USB device ie. a floppy drive an=
d a=20
> >little kernel message appears notifying me that it is plugged in, but =
then=20
I=20
> >am not able to mount it.  Then I try my USB Visor.  Plug it in press t=
he=20
> >button, device message shows up, but can't communicate with the device=
=2E =20
Not=20
> >being one to give up I recompiled my kernel for rio mp3 player support=
=2E =20
> >installed rioutil and tryed again.  Plug it in, device shows up as rio=
0,=20
but=20
> >when I try to query information from it: rioutil -i.  It just hangs an=
d I=20
> >have to [ctl]-c it.
> >   I've pasted my dmesg below.  Is there anything else that I can send=
 that=20
> >would help?  I don't have any problems with coding if it comes to that=
=2E =20
> >Thanks.
>=20
> >umass0: NEC NEC USB UF000x, rev 1.10/1.21, addr 2
> >da0 at umass-sim0 bus 0 target 0 lun 0
> >da0: <NEC USB UF000x 1.21> Removable Direct Access SCSI-0 device
> >da0: 20KB/s transfers
> >da0: 1MB (2880 512 byte sectors: 2H 18S/T 80C)
> >umass0: Unsupported UFI command 0x08, 6 byte command should have been=20
> >converted
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> This error suggests that you need the following line in /etc/sysctl.con=
f:
> kern.cam.da.no_6_byte=3D1
> (then reboot, or run sysctl -w kern.cam.da.no_6_byte=3D1  .)
>=20
> It may not solve all your problems, but it did solve some I was
> having with flash card readers and solid-state USB disks.
>=20
>=20
> >da0: reading primary partition table: error reading fsbn 0
> >umass0: Unsupported UFI command 0x35
> >(da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, s=
csi=20
status=20
> >=3D=3D 0x0
>=20
> =09=09=09=09=09=09Gordon L. Burditt
>=20
>=20

Thanks, that worked for the floppy drive.  I can mount that fine now.  Bu=
t I=20
am still having problems with my USB devices.  From further testing I was=
=20
able to figure out that after a reboot the first device that you plug in =
and=20
it's first query for information seem to work fine.
1) Insert the USB floppy drive and mount it
2) I can read/write whatever just fine.
3) Unmount then disconnect it.
4) Insert the drive again and it is recongnized, but fails to create=20
communicate with the device.
NOTE: If I kill the usbd, and restart it at this point I get a message=20
/dev/usb: Device busy.
5) Try attaching other device, but nothing is recognized.
Now when I try with the Rio600 MP3 player the following happens, I have=20
inserted  usb kernel debug messages at the point they appeared:
1) Insert rio, and it's recognized.
Aug 24 21:26:40 littleguy /kernel: uhub_explore: status change hub=3D1 po=
rt=3D2
Aug 24 21:26:40 littleguy /kernel: usbd_new_device bus=3D0xc09da000 port=3D=
2=20
depth=3D1 lowspeed=3D0
Aug 24 21:26:40 littleguy /kernel: usbd_new_device: adding unit addr=3D2,=
=20
rev=3D100, class=3D0, subclass=3D0, protocol=3D0, maxpacket=3D16, len=3D1=
8, ls=3D0
Aug 24 21:26:40 littleguy /kernel: usbd_new_device: new dev (addr 2),=20
dev=3D0xc1019600, parent=3D0xc0e7e280
Aug 24 21:26:40 littleguy /kernel: usbd_probe_and_attach: trying device=20
specific drivers
Aug 24 21:26:40 littleguy /kernel: usbd_probe_and_attach: no device speci=
fic=20
driver found
Aug 24 21:26:40 littleguy /kernel: usbd_probe_and_attach: looping over 1=20
configurations
Aug 24 21:26:40 littleguy /kernel: usbd_set_config_index: (addr 2) attr=3D=
0x40,=20
selfpowered=3D1, power=3D0
Aug 24 21:26:40 littleguy /kernel: usbd_set_config_index: set config 1
Aug 24 21:26:40 littleguy /kernel: urio0: Diamond Multimedia Diamond=20
Multimedia  Digital Audio Player, rev 1.00/1.00, addr 2
2) Run "rioutil -i" to view device stats:
littleguy# rioutil -i
Name: Rio 600
Volume: 8
Repeat: Off
Equilizer: Rap
Backlight: 2 secs
Programmed to Playlist: 0
Firmware Version: 1.56
Memory units: 1
Memory unit 0: Internal Flash Memory
Free: 5.6 MB (32.0 MB Total)
Used: 26.3 MB in 6 files
[#########################################         ] 82.3 %
Total Time: 00:19:04
3) Run "rioutil -i" again to view the stats again, this and subsequent ti=
mes I=20
get garbage for the first part only:
littleguy# rioutil -i
Name: =F7=F3=BF=BF
Volume: 1
Repeat: Off
Equilizer: (null)
Backlight: (null)
Programmed to Playlist: 40
Firmware Version: 240.98
Memory units: 1
Memory unit 0: Internal Flash Memory
Free: 5.6 MB (32.0 MB Total)
Used: 26.3 MB in 0 files
[#########################################         ] 82.3 %
Total Time: 00:00:00
4) Unplug device.
Aug 24 21:34:54 littleguy /kernel: uhub_explore: C_PORT_ENABLED
Aug 24 21:34:54 littleguy /kernel: uhub_explore: device addr=3D2 disappea=
red on=20
port 2
Aug 24 21:35:04 littleguy /kernel: urio0: at uhub0 port 2 (addr 2)=20
disconnected
Aug 24 21:35:04 littleguy /kernel: urio0: disconnected
Aug 24 21:35:04 littleguy /kernel: urio0: detached
5) Plugin in device again, and it's not recognized.
Aug 24 21:35:20 littleguy /kernel: uhub_explore: status change hub=3D1 po=
rt=3D2
Aug 24 21:35:20 littleguy /kernel: usbd_new_device bus=3D0xc09da000 port=3D=
2=20
depth=3D1 lowspeed=3D0
6) Unplug device
Aug 24 21:35:36 littleguy /kernel: usbd_new_device: addr=3D2, getting fir=
st desc=20
failed
Aug 24 21:35:36 littleguy /kernel: usbd_remove_device: 0xc1019600
Aug 24 21:35:36 littleguy /kernel: uhub_explore: usb_new_device failed,=20
error=3DTIMEOUT
Aug 24 21:35:36 littleguy /kernel: uhub0: device problem, disabling port =
2

--=20
Anish Mistry


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 24 19:28:20 2002
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id A6F1337B400
	for <FreeBSD-Mobile@FreeBSD.org>; Sat, 24 Aug 2002 19:28:16 -0700 (PDT)
Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 1335843E4A
	for <FreeBSD-Mobile@FreeBSD.org>; Sat, 24 Aug 2002 19:28:16 -0700 (PDT)
	(envelope-from mavery@pop.myrealbox.com)
Received: from Telestar mavery@smtp-send.myrealbox.com [205.229.168.203]
	by smtp-send.myrealbox.com with NetMail SMTP Agent $Revision:   3.11  $ on Novell NetWare;
	Sat, 24 Aug 2002 20:28:15 -0600
From: "Mike Avery" <mavery@myrealbox.com>
To: FreeBSD-Mobile@FreeBSD.org
Date: Sat, 24 Aug 2002 20:28:13 -0600
MIME-Version: 1.0
Subject: Re: BSD 4.6, X, and Savage IX w/MV woes
Reply-To: mavery@mail.otherwhen.com
Message-ID: <3D67EC5D.28438.1DB437B@localhost>
In-reply-to: <20020824220705.GA9746@laptop.lambertfam.org>
References: <3D677D40.13121.4FAB070@localhost>
X-mailer: Pegasus Mail for Windows (v4.02)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Content-description: Mail message body
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-mobile.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-mobile>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-mobile>
X-Loop: FreeBSD.org

On 24 Aug 2002 at 18:07, Scott Lambert wrote:

> On Sat, Aug 24, 2002 at 12:34:08PM -0600, Mike Avery wrote:
> > I'm trying to get my Toshiba 2755 laptop running with 
> > FreeBSD 4.6.  Sadly, I bought this machine before I 
> > was thinking about running FreeBSD on a laptop.  
> 
> That's ok, it will probably work just fine.

FreeBSD is great..... it's just X that isn't.  I hate being 
Xless.

> That sounds like the Savage chip that is in my Toshiba 2805 and which
> has been working perfectly ever since XFree86 4.0.1.  Make sure you
> installed XFree86 4.x and *not* XFree86 3.x.  3.x doesn't work with
> the Savage IX/MV.  BTW, this is an XFree86 issue you are having, it's
> not FreeBSD's fault. :-)  XFree68 will work for you once we get the
> magic incantations right.  Don't dispare.

I figured that.... but making sure the moon was in the 
right phase, that I was holding my tongue just so, and 
then trying to say the right words was getting 
frustrating.

> > (Red Hat chokes on the Cisco 
> > PCM340 Card in the laptop.  There is no joy in mudville.  
> > While I'd rather have FreeBSD working on the machine, 
> > my main goal is to get Microsoft OFF the machine.)

> I haven't tried a Cisco card yet.  But I've seen reports of success. I
> wiped Windows off this machine the day after I bought it.

The Cisco card works great under FreeBSD.  It took 
two days to figure out how to make it happen <g>.
 
> > I'd appreciate any pointers, tips, or answers you can 
> > share.  I've been rt'ing the fm, and cursing google until 
> > my eyes cross.... so far, no joy.  

> I don't know how different the 2755 is from the 2805, but you might at
> least want to try snarfing my XFree86 config file from:
 
> http://www.LambertFam.org/~lambert/laptop/
 Grabbed it... progress report will follow in a day or two.
 
Thanks,
Mike


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message