From owner-freebsd-smp Sun Jul 21 12: 2:37 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C2A0E37B400 for ; Sun, 21 Jul 2002 12:02:35 -0700 (PDT) Received: from mail5.ksc.th.com (mail5.ksc.th.com [203.155.0.236]) by mx1.FreeBSD.org (Postfix) with ESMTP id C885143E4A for ; Sun, 21 Jul 2002 12:02:34 -0700 (PDT) (envelope-from easytoberich01@yahoo.com) Received: from ksc.th.com ([203.107.241.168]) by mail5.ksc.th.com (8.12.1/8.12.0) with SMTP id g6LILZxZ010927 for ; Mon, 22 Jul 2002 02:02:33 +0700 Message-Id: <200207211902.g6LILZxZ010927@mail5.ksc.th.com> Date: Mon, 22 Jul 2002 02:04:34 To: smp@FreeBSD.org From: easytoberich01@yahoo.com (chancetoberich) Subject: สำหรับผู้ที่ต้องการโอกาสในการเปลี่ยนแปลงชีวิต Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org !!!!! Part-Time Job!! สำหรับนักเรียน นักศึกษา และผู้ทำงานประจำ คุณต้องการงานแบบนี้บ้างไหม…?? -งาน parttime ทำงานที่บ้านได้ ถ้าคุณใช้ Internet เป็น -ทำงานเพียงวันละ 2-3 ชม. -รายได้ 5,000 – 15,000 บาท ถ้าคุณเป็นคนหนึ่งที่ทำงานประจำหรือยังไม่มีงานทำ นักศึกษาที่กำลังศึกษาอยู่ ผู้ว่างงาน หรือผู้ที่ยังพอมีเวลาว่างจากงานประจำ มีคุณสมบัติเบื้องต้นดังนี้ 1. มีทัศนคติที่ดี 2. พร้อมที่จะเรียนรู้ เนื่องจากเป็นระบบใหม่จึงต้องให้มีการอบรมให้ตามความเหมาะสม 3. ต้องการที่จะทำงานอย่างจริงจัง อยากที่จะเปลี่ยนฐานะทางการเงินของตนเอง และอยากมีรายได้จากการทำงานตรงนี้จริงๆ ทุกอย่างเป็นไปได้ ใน http://www.geocities.com/getchances2000/ อย่า !…………….. เป็นแค่เพียงคนที่นั่งรอโอกาส To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sun Jul 21 12:25:47 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DF51237B400 for ; Sun, 21 Jul 2002 12:25:46 -0700 (PDT) Received: from mail5.ksc.th.com (mail5.ksc.th.com [203.155.0.236]) by mx1.FreeBSD.org (Postfix) with ESMTP id E417343E58 for ; Sun, 21 Jul 2002 12:25:45 -0700 (PDT) (envelope-from easytoberich01@yahoo.com) Received: from ksc.th.com ([203.107.241.168]) by mail5.ksc.th.com (8.12.1/8.12.0) with SMTP id g6LILZBB010927 for ; Mon, 22 Jul 2002 02:25:43 +0700 Message-Id: <200207211925.g6LILZBB010927@mail5.ksc.th.com> Date: Mon, 22 Jul 2002 02:27:45 To: freebsd-smp@FreeBSD.org From: easytoberich01@yahoo.com (chancetoberich) Subject: สำหรับผู้ที่ต้องการโอกาสในการเปลี่ยนแปลงชีวิต Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org !!!!! Part-Time Job!! สำหรับนักเรียน นักศึกษา และผู้ทำงานประจำ คุณต้องการงานแบบนี้บ้างไหม…?? -งาน parttime ทำงานที่บ้านได้ ถ้าคุณใช้ Internet เป็น -ทำงานเพียงวันละ 2-3 ชม. -รายได้ 5,000 – 15,000 บาท ถ้าคุณเป็นคนหนึ่งที่ทำงานประจำหรือยังไม่มีงานทำ นักศึกษาที่กำลังศึกษาอยู่ ผู้ว่างงาน หรือผู้ที่ยังพอมีเวลาว่างจากงานประจำ มีคุณสมบัติเบื้องต้นดังนี้ 1. มีทัศนคติที่ดี 2. พร้อมที่จะเรียนรู้ เนื่องจากเป็นระบบใหม่จึงต้องให้มีการอบรมให้ตามความเหมาะสม 3. ต้องการที่จะทำงานอย่างจริงจัง อยากที่จะเปลี่ยนฐานะทางการเงินของตนเอง และอยากมีรายได้จากการทำงานตรงนี้จริงๆ ทุกอย่างเป็นไปได้ ใน http://www.geocities.com/getchances2000/ อย่า !…………….. เป็นแค่เพียงคนที่นั่งรอโอกาส To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sun Jul 21 19:10:30 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F20B37B400; Sun, 21 Jul 2002 19:10:29 -0700 (PDT) Received: from mta7.pltn13.pbi.net (mta7.pltn13.pbi.net [64.164.98.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id A17C243E31; Sun, 21 Jul 2002 19:10:28 -0700 (PDT) (envelope-from mtm@pacbell.net) Received: from kokeb.ambesa.net ([64.173.10.185]) by mta7.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GZM00L6SOPG57@mta7.pltn13.pbi.net>; Sun, 21 Jul 2002 19:10:28 -0700 (PDT) Received: from kokeb.ambesa.net (tanstaafl@localhost [IPv6:::1]) by kokeb.ambesa.net (8.12.5/8.12.5) with ESMTP id g6M2A78D002442; Sun, 21 Jul 2002 19:10:07 -0700 (PDT envelope-from mtm@kokeb.ambesa.net) Received: (from mtm@localhost) by kokeb.ambesa.net (8.12.5/8.12.5/Submit) id g6M2A7KV002441; Sun, 21 Jul 2002 19:10:07 -0700 (PDT) Date: Sun, 21 Jul 2002 19:10:07 -0700 From: Mike Makonnen Subject: Re: Getting resource limits out from under Giant In-reply-to: To: John Baldwin Cc: freebsd-smp@FreeBSD.org, bright@mu.org Message-id: <20020721191007.7aa7cf4e.makonnen@pacbell.net> MIME-version: 1.0 X-Mailer: Sylpheed version 0.7.8 (GTK+ 1.2.10; i386-portbld-freebsd5.0) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT References: <20020713222131.6ebf07c8.makonnen@pacbell.net> Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Mon, 15 Jul 2002 09:03:14 -0400 (EDT) John Baldwin wrote: > > > At this early stage (relatively) I would prefer to get it working cleanly > and optimize it later, but that's just me. > Ok. Done. I've worked on it some more. I think I've caught all the areas in the code that touch or read limits. The new patch is up at: http://home.pacbell.net/makonnen/limits.tar.gz The tarball contains three patches. The first one adds the limit locking infrastructure to the kernel, the second one locks down all references to limits. If the limit structure is being modified or the code requires a stable reference over several lines of code, the locks both the proc and limit. If the code just dereferences the limit structure, then it just locks the proc structure. The third patch removes giant from the relevant code. However, I left it in place in some instances because I was not sure whether the code still required it or not. Cheers, Mike Makonnen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jul 22 7:44:14 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 56E5F37B400; Mon, 22 Jul 2002 07:44:13 -0700 (PDT) Received: from mta7.pltn13.pbi.net (mta7.pltn13.pbi.net [64.164.98.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0192F43E42; Mon, 22 Jul 2002 07:44:13 -0700 (PDT) (envelope-from mtm@pacbell.net) Received: from kokeb.ambesa.net ([64.172.25.215]) by mta7.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GZN00FI5NLOK8@mta7.pltn13.pbi.net>; Mon, 22 Jul 2002 07:44:12 -0700 (PDT) Received: from kokeb.ambesa.net (tanstaafl@localhost [IPv6:::1]) by kokeb.ambesa.net (8.12.5/8.12.5) with ESMTP id g6MEhvYA001043; Mon, 22 Jul 2002 07:43:57 -0700 (PDT envelope-from mtm@kokeb.ambesa.net) Received: (from mtm@localhost) by kokeb.ambesa.net (8.12.5/8.12.5/Submit) id g6MEhuCs001042; Mon, 22 Jul 2002 07:43:56 -0700 (PDT) Date: Mon, 22 Jul 2002 07:43:56 -0700 From: Mike Makonnen Subject: Re: Getting resource limits out from under Giant In-reply-to: <20020721191007.7aa7cf4e.makonnen@pacbell.net> To: jhb@FreeBSD.ORG Cc: freebsd-smp@FreeBSD.ORG, bright@mu.org Message-id: <20020722074356.6d1ccc14.makonnen@pacbell.net> MIME-version: 1.0 X-Mailer: Sylpheed version 0.7.8 (GTK+ 1.2.10; i386-portbld-freebsd5.0) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT References: <20020713222131.6ebf07c8.makonnen@pacbell.net> <20020721191007.7aa7cf4e.makonnen@pacbell.net> Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Sun, 21 Jul 2002 19:10:07 -0700 Mike Makonnen wrote: > > Ok. Done. > Please disregard this patch. Sub-standard QA :-P Cheers, Mike Makonnen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Jul 23 9:13:18 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 96DE937B401 for ; Tue, 23 Jul 2002 09:13:09 -0700 (PDT) Received: from sdmmail02.silverpop.com (sdmmail02.silverpop.com [66.45.77.86]) by mx1.FreeBSD.org (Postfix) with ESMTP id 80CC143E6A for ; Tue, 23 Jul 2002 09:13:08 -0700 (PDT) (envelope-from bounce@bounce.rm04.net) Received: from mailgen (10.18.19.175) by sdmmail02.silverpop.com (PowerMTA(TM) v1.5); Tue, 23 Jul 2002 12:13:02 -0400 (envelope-from ) Message-ID: <4567471.1027440781400.JavaMail.root@mailgen> Date: Tue, 23 Jul 2002 12:13:01 -0400 (EDT) From: "Vigilar.net" Reply-To: vigilar@vigilar.net To: freebsd-smp@freebsd.org Subject: Information Security Certification Update Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_73236_5027901.1027440781394" Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org ------=_Part_73236_5027901.1027440781394 Content-Type: text/plain Content-Transfer-Encoding: 7bit To view this mail in a browser, copy http://rm03.net:80/servlet/MailViewServlet?s=E7skHh9ug9yMdoN2PM3hXw** into your browser. 1. Never Before Offered Check Point NG and Nokia Combined Training! 2. Changing CISSP Requirements- How Not to be Affected TIP: How to Receive a $50 Discount When Registering for the Exam 3. Wireless Security Training- Technologies for the Future are Now the Technologies of Today 4. InfoSec Training Location Convenience and a Satisfaction Guarantee 5. Refer a Friend and get $100 6. Request a Free Product Quote: Lowest Price Guaranteed Call a Vigilar Sales Representative today for class and location availability! 1.866.365.8401 1. NEVER BEFORE OFFERED CHECK POINT NG AND NOKIA COMBINED TRAINING Train to attain 3 certifications for the price of 2, a savings of over $2500! Enroll today in the first of its kind vendor/product combination prep course. This 5-day intensive training consists of material that would normally take students 7 days to complete, but because Vigilar employs only the industry’s best instructors, we’re able to teach you MORE, while consuming LESS of your time. www.vigilar.com/combined REGISTER BY AUGUST 15 AND RECEIVE A $500 GIFT CERTIFICATE TO AMAZON.COM 2. CHANGING CISSP REQUIREMENTS- HOW NOT TO BE AFFECTED Did you know that eligibility requirements for the highly coveted CISSP certification are changing in 4 short months? Join Vigilar’s 98% pass rate by taking advantage of the current requirements through our 5-day intensive course. Not only does Vigilar provide state-of-the art accommodations as well as complimentary breakfasts and snacks-- our CISSP certified instructors help to compose our industry renowned consulting team. www.vigilar.com/cissp REGISTER NOW AND RECEIVE A COMPLIMENTARY COPY OF: The Total CISSP Exam Prep Book: Practice Questions, Answers, and Test Taking Tips and Techniques by Thomas Peltier, Patrick D. Howard How Do You Save $50 When Enrolling for the CISSP Examination? Call Your Vigilar Representative : 1.866.365.8401 option 3 Click here to view customer testimonials: www.vigilar.com/testimonials 3. WIRELESS SECURITY TRAINING- TECHNOLOGIES FOR THE FUTURE ARE NOW THE TECHNOLOGIES OF TODAY Is your organization prepared to deal with the security risks associated with the deployment of a wireless network? Does your internal information security staff know how to secure an already deployed and unmonitored wireless architecture? Vigilar now offers a special 2-day Wireless specific course encompassing both lecture and lab exercises. For more on our newest class edition: www.vigilar.com/wireless 4. INFOSEC TRAINING LOCATION CONVENIENCE AND A SATISFACTION GUARANTEE? Vigilar is proud to present an InfoSec Training Curriculum offered both nationwide and onsite. We want to make sure that finding a training location is both convenient geographically and fits well within your time schedule. Nowhere else in the industry will you find such a comprehensive schedule of courses- and if you don’t see a course listed for your area, we will come and teach on-site. Not only that, but Vigilar offers a 100% Satisfaction Guarantee on all of our pre-certification courses. If the student does not pass their exam on the first attempt, they are free to re-take the class again within one calendar year from the date of the original class. 5. REFER A FRIEND AND GET A $100 GIFT CERTIFICATE TO AMAZON.COM If you know of someone interested in becoming certified, all you need to do is refer them to Vigilar. That’s all—nothing more—nothing less. To refer a peer, please fill out form: www.vigilar.com/refer 6. REQUEST A FREE PRODUCT QUOTE: LOWEST PRICE GUARANTEED Vigilar has partnered with best-of-breed technology control vendors in order to offer our customers the most comprehensive infosec solutions available today. A sampling of our partners include: Check Point Software Technologies, Nokia, Enterasys, Sanctum, Symantec, CipherTrust, and many more. We guarantee lowest pricing on all product sales with the highest quality of service available, so if you’re in the market for controls, make Vigilar your first stop to shop. http://www.vigilar.com/products/prod_form.htm PLEASE FEEL FREE TO FORWARD THIS EMAIL ON TO YOUR PEERS. We also offer Cisco Security Training! Call for details: 1.866.365.8401 Vigilar respects your privacy. If you choose to not receive future training updates from us, please click the unsubscribe button below. Please visit the following URL to opt out:http://rm03.net:80/ui/modules/display/optOut.jsp?k=Y8HeeFyNrR95-oLFvdCz4rESeLopM9xbDSMDPhwN6ybV_fFVBsjl2ahbt8qvRRFNGycXnRf2.pLRsK5XRMMo5khLg0EC994uOXpIkFfK5m1bTqMPDF5Vqww** ------=_Part_73236_5027901.1027440781394 Content-Type: text/html Content-Transfer-Encoding: 7bit

1.                  Never Before Offered Check Point NG and Nokia Combined Training!

2.                  Changing CISSP Requirements- How Not to be Affected

                        TIP:  How to Receive a $50 Discount When Registering for the Exam

3.                  Wireless Security Training- Technologies for the Future are Now the Technologies of Today

4.                  InfoSec Training Location Convenience and a Satisfaction Guarantee

5.                  Refer a Friend and get $100

6.                  Request a Free Product Quote:  Lowest Price Guaranteed

 

Call a Vigilar Sales Representative today for class and location availability!  1.866.365.8401

 

 

1.               NEVER BEFORE OFFERED CHECK POINT NG AND NOKIA COMBINED TRAINING

Train to attain 3 certifications for the price of 2, a savings of over $2500!  Enroll today in the first of its kind vendor/product combination prep course.  This 5-day intensive training consists of material that would normally take students 7 days to complete, but because Vigilar employs only the industry’s best instructors, we’re able to teach you MORE, while consuming LESS of your time.   www.vigilar.com/combined

 

 

REGISTER BY AUGUST 15 AND RECEIVE A $500 GIFT CERTIFICATE TO  AMAZON.COM

 

 

2.         CHANGING CISSP REQUIREMENTS- HOW NOT TO BE AFFECTED

Did you know that eligibility requirements for the highly coveted CISSP certification are changing in 4 short months?  Join Vigilar’s 98% pass rate by taking advantage of the current requirements through our 5-day intensive course.  Not only does Vigilar provide state-of-the art accommodations as well as complimentary breakfasts and snacks-- our CISSP certified instructors help to compose our industry renowned consulting team. www.vigilar.com/cissp

 

      REGISTER NOW AND RECEIVE A COMPLIMENTARY COPY OF:

The Total CISSP Exam Prep Book: Practice Questions, Answers, and Test Taking Tips and Techniques  by Thomas Peltier, Patrick D. Howard

 

How Do You Save $50 When Enrolling for the CISSP Examination?  Call Your Vigilar Representative :  1.866.365.8401 option 3

 

Click here to view customer testimonials: www.vigilar.com/testimonials

 

3.                              WIRELESS SECURITY TRAINING- TECHNOLOGIES FOR THE FUTURE ARE NOW THE TECHNOLOGIES OF TODAY

Is your organization prepared to deal with the security risks associated with the deployment of a wireless network?  Does your internal information security staff know how to secure an already deployed and unmonitored wireless architecture?  Vigilar now offers a special 2-day Wireless specific course encompassing both lecture and lab exercises.  For more on our newest class edition:  www.vigilar.com/wireless

 

 

4.               INFOSEC TRAINING LOCATION CONVENIENCE AND A SATISFACTION GUARANTEE?

Vigilar is proud to present an InfoSec Training Curriculum offered both nationwide and onsite.  We want to make sure that finding a training location is both convenient geographically and fits well within your time schedule.  Nowhere else in the industry will you find such a comprehensive schedule of courses- and if you don’t see a course listed for your area, we will come and teach on-site.  Not only that, but Vigilar offers a 100% Satisfaction Guarantee on all of our pre-certification courses.  If the student does not pass their exam on the first attempt, they are free to re-take the class again within one calendar year from the date of the original class.

 

5.               REFER A FRIEND AND GET A $100 GIFT CERTIFICATE TO AMAZON.COM

If you know of someone interested in becoming certified, all you need to do is refer them to Vigilar. That’s all—nothing more—nothing less. 

 

To refer a peer, please fill out form:  www.vigilar.com/refer

 

6.               REQUEST A FREE PRODUCT QUOTE:  LOWEST PRICE GUARANTEED

Vigilar has partnered with best-of-breed technology control vendors in order to offer our customers the most comprehensive infosec solutions available today.  A sampling of our partners include:  Check Point Software Technologies, Nokia, Enterasys, Sanctum, Symantec, CipherTrust, and many more.  We guarantee lowest pricing on all product sales with the highest quality of service available, so if you’re in the market for controls, make Vigilar your first stop to shop.

 

http://www.vigilar.com/products/prod_form.htm

 

PLEASE FEEL FREE TO FORWARD THIS EMAIL ON TO YOUR PEERS.  We also offer Cisco Security Training!

Call for details:  1.866.365.8401

 

Vigilar respects your privacy.  If you choose to not receive future training updates from us, please click the unsubscribe button below.



To unsubscribe from this mailing list, click here.
------=_Part_73236_5027901.1027440781394-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Jul 23 21:44:15 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 99C6D37B400 for ; Tue, 23 Jul 2002 21:43:35 -0700 (PDT) Received: from hotmail.com (oe29.law9.hotmail.com [64.4.8.86]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8E7C443E3B for ; Tue, 23 Jul 2002 21:43:34 -0700 (PDT) (envelope-from devghost@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 23 Jul 2002 21:43:34 -0700 X-Originating-IP: [66.130.112.2] From: "/Dev/Ghost" To: Subject: Unable to boot dual PII system Date: Wed, 24 Jul 2002 00:51:44 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C232AC.48122E70" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 24 Jul 2002 04:43:34.0366 (UTC) FILETIME=[AB03B7E0:01C232CC] Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C232AC.48122E70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello everyone ! I recently came across a acer altos 9100b, dual PII-400 with 1G ram. = I've decided to install FreeBSD 4.6 (ISO) on it to be my main server. = This is not my first FreeBSD install but it is the first on a = multi-processors machine. I compiled a new kernel ( un-commented both = SMP options, config, make, make install ) but now it refuses to boot. If = I boot with kernel.old it is ok ( dmesg ( boot -v ) and mptable at end = of message). With the SMP-kernel, just after the line that says: = "Waiting 15 seconds for SCSI devices to settle" I get the following = lines: SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(); lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: = 0x0000001ff and then the kernel deadlocks and I have to power-cycle it to try to = boot again. ( ctrl-alt-del or ^D or ^C does nothing) DMESG: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298 = Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2 = Features=3D0x183fbff real memory =3D 1073741824 (1048576K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004f7000 - 0x3fff7fff, 1068503040 bytes (260865 pages) avail memory =3D 1040207872 (1015828K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0280 bios32: Entry =3D 0xf0210 (c00f0210) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00f56f0 pnpbios: Entry =3D fa000:0 Rev =3D 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel.old" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D71928086) pcibios: No call entry point npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 00000000, size 28 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel.old" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D71928086) pcibios: No call entry point npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 00000000, size 28 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D255 found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[90]: type 1, range 32, base 00000800, size 4 found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D1 secondarybus=3D1 found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x02 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D10 map[10]: type 1, range 32, base 43500000, size 12 map[14]: type 1, range 32, base 0000ac00, size 5 map[18]: type 1, range 32, base 43200000, size 20 found-> vendor=3D0x1002, dev=3D0x5654, revid=3D0x40 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 42000000, size 24 map[14]: type 1, range 32, base 0000a800, size 8 pci0: on pcib0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS uhci0: at device 7.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 chip1: port 0x800-0x80f at = device 7. 3 on pci0 pcib1: at device 15.0 on pci0 found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D15 map[10]: type 1, range 32, base 00009400, size 8 map[14]: type 1, range 32, base 41100000, size 12 found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D15 map[10]: type 1, range 32, base 00009800, size 8 map[14]: type 1, range 32, base 41101000, size 12 pci1: on pcib1 ahc0: port 0x9400-0x94ff mem = 0x41100000-0x4 1100fff irq 15 at device 6.0 on pci1 ahc0: Reading SEEPROM...done. ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 431 instructions downloaded aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs ahc1: port 0x9800-0x98ff mem = 0x41101000-0x4 1101fff irq 15 at device 10.0 on pci1 ahc1: Reading SEEPROM...done. ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 431 instructions downloaded using shared irq15. aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs fxp0: port 0xac00-0xac1f mem = 0x43200000-0x432f ffff,0x43500000-0x43500fff irq 10 at device 16.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:00:e2:20:56:55 fxp0: PCI IDs: 8086 1229 8086 0001 0002 fxp0: Dynamic Standby mode is disabled nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached pci0: (vendor=3D0x1002, = dev=3D0x5654) at 17.0 ex_isa_identify() Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0:
Hello everyone !
 
 I recently came across a acer = altos 9100b,=20 dual PII-400 with 1G ram. I've decided to install FreeBSD 4.6 = (ISO) on it=20 to be my main server. This is not my first FreeBSD install but it is the = first=20 on a multi-processors machine. I compiled a new kernel ( un-commented = both SMP=20 options, config, make, make install ) but now it refuses to boot. = If I boot=20 with kernel.old it is ok ( dmesg ( boot -v ) and mptable at = end of=20 message). With the SMP-kernel, just after the line that says: "Waiting = 15=20 seconds for SCSI devices to settle" I get the following = lines:
 
SMP: AP CPU #1 Launched!
SMP: CPU1 = apic_initialize();
     lint0: = 0x00010700 lint1:=20 0x00010400 TPR: 0x00000010 SVR: 0x0000001ff
 
and then the kernel deadlocks and I = have to=20 power-cycle it to try to boot again. ( ctrl-alt-del or ^D = or ^C does=20 nothing)
 
 
DMESG:
 
Copyright (c) 1992-2002 The FreeBSD=20 Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, = 1992, 1993,=20 1994
        The Regents of the = University=20 of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun = 11=20 06:14:12 GMT 2002
    murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Cal= ibrating=20 clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298=20 Hz
CLK_USE_I8254_CALIBRATION not specified - using default=20 frequency
Timecounter "i8254"  frequency 1193182=20 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration=20 method
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class=20 CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x652  = Stepping =3D=20 2
 =20 Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real=20 memory  =3D 1073741824 (1048576K bytes)
Physical memory=20 chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 = pages)
0x004f7000 -=20 0x3fff7fff, 1068503040 bytes (260865 pages)
avail memory =3D = 1040207872=20 (1015828K bytes)
bios32: Found BIOS32 Service Directory header at=20 0xc00f0280
bios32: Entry =3D 0xf0210 (c00f0210)  Rev =3D 0  = Len =3D=20 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at=20 0xc00f56f0
pnpbios: Entry =3D fa000:0  Rev =3D 1.0
Other BIOS = signatures=20 found:
ACPI: 00000000
Preloaded elf kernel "kernel.old" at=20 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc = disk
Creating=20 DISK md0
Math emulator present
pci_open(1):    mode = 1 addr=20 port (0x0cf8) is 0x8000384c
pci_open(1a):   = mode1res=3D0x80000000=20 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] = [hdr=3D00] is=20 there (id=3D71928086)
pcibios: No call entry point
npx0: <math=20 processor> on motherboard
npx0: INT 16 interface
pcib0: = <Intel=20 82443BX host to PCI bridge (AGP disabled)> on = motherboard
found->=20 vendor=3D0x8086, dev=3D0x7192,=20 revid=3D0x02
        = class=3D06-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 00000000, size 28
found-> vendor=3D0x8086, = dev=3D0x7110,=20 revid=3D0x02
        = class=3D06-01-00,=20 hdrtype=3D0x00, mfdev=3D1
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111,=20 revid=3D0x01
        = class=3D01-01-80,=20 hdrtype=3D0x00, mfdev=3D0
Other BIOS signatures found:
ACPI:=20 00000000
Preloaded elf kernel "kernel.old" at 0xc04d0000.
Pentium = Pro MTRR=20 support enabled
md0: Malloc disk
Creating DISK md0
Math = emulator=20 present
pci_open(1):    mode 1 addr port (0x0cf8) is=20 0x8000384c
pci_open(1a):   mode1res=3D0x80000000=20 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] = [hdr=3D00] is=20 there (id=3D71928086)
pcibios: No call entry point
npx0: <math=20 processor> on motherboard
npx0: INT 16 interface
pcib0: = <Intel=20 82443BX host to PCI bridge (AGP disabled)> on = motherboard
found->=20 vendor=3D0x8086, dev=3D0x7192,=20 revid=3D0x02
        = class=3D06-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 00000000, size 28
found-> vendor=3D0x8086, = dev=3D0x7110,=20 revid=3D0x02
        = class=3D06-01-00,=20 hdrtype=3D0x00, mfdev=3D1
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111,=20 revid=3D0x01
        = class=3D01-01-80,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7112,=20 revid=3D0x01
        = class=3D0c-03-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Dd,=20 irq=3D255
found-> vendor=3D0x8086, dev=3D0x7113,=20 revid=3D0x02
        = class=3D06-80-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[90]: = type 1,=20 range 32, base 00000800, size  4
found-> vendor=3D0x1011, = dev=3D0x0024,=20 revid=3D0x03
        = class=3D06-04-00,=20 hdrtype=3D0x01, mfdev=3D0
       =20 subordinatebus=3D1       =20 secondarybus=3D1
found-> vendor=3D0x8086, dev=3D0x1229,=20 revid=3D0x02
        = class=3D02-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D10
        map[10]: type 1, = range 32,=20 base 43500000, size 12
        = map[14]:=20 type 1, range 32, base 0000ac00, size =20 5
        map[18]: type 1, range = 32, base=20 43200000, size 20
found-> vendor=3D0x1002, dev=3D0x5654,=20 revid=3D0x40
        = class=3D03-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 42000000, size = 24
       =20 map[14]: type 1, range 32, base 0000a800, size  8
pci0: <PCI = bus>=20 on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 = on=20 pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 = controller> at device 7.1 on pci0
atapci0: ATA channel disabled by = BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device = 7.2 on=20 pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 = attach=20 returned 6
chip1: <Intel 82371AB Power management controller> = port=20 0x800-0x80f at device 7.
3 on pci0
pcib1: <DEC 21152 PCI-PCI = bridge>=20 at device 15.0 on pci0
found-> vendor=3D0x9004, dev=3D0x8078,=20 revid=3D0x01
        = class=3D01-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D15
        map[10]: type 1, = range 32,=20 base 00009400, size  = 8
       =20 map[14]: type 1, range 32, base 41100000, size 12
found-> = vendor=3D0x9004,=20 dev=3D0x8078, revid=3D0x01
        = class=3D01-00-00, hdrtype=3D0x00,=20 mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D15
        map[10]: type 1, = range 32,=20 base 00009800, size  = 8
       =20 map[14]: type 1, range 32, base 41101000, size 12
pci1: <PCI = bus> on=20 pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port = 0x9400-0x94ff mem=20 0x41100000-0x4
1100fff irq 15 at device 6.0 on pci1
ahc0: Reading=20 SEEPROM...done.
ahc0: High byte termination Enabled
ahc0: = Downloading=20 Sequencer Program... 431 instructions downloaded
aic7880: Ultra Wide = Channel=20 A, SCSI Id=3D7, 16/253 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI = adapter>=20 port 0x9800-0x98ff mem 0x41101000-0x4
1101fff irq 15 at device 10.0 = on=20 pci1
ahc1: Reading SEEPROM...done.
ahc1: High byte termination=20 Enabled
ahc1: Downloading Sequencer Program... 431 instructions=20 downloaded
        using shared=20 irq15.
aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 = SCBs
fxp0:=20 <Intel Pro 10/100B/100+ Ethernet> port 0xac00-0xac1f mem=20 0x43200000-0x432f
ffff,0x43500000-0x43500fff irq 10 at device 16.0 on = pci0
fxp0: using memory space register mapping
fxp0: Ethernet = address=20 00:00:e2:20:56:55
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: = Dynamic=20 Standby mode is disabled
nsphy0: <DP83840 10/100 media = interface> on=20 miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = auto
bpf: fxp0 attached
pci0: <ATI Mach64-VT graphics = accelerator>=20 (vendor=3D0x1002, dev=3D0x5654) at 17.0
ex_isa_identify()
Trying = Read_Port at=20 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying = Read_Port at=20 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying = Read_Port at=20 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP=20 devices
isa_probe_children: probing non-PnP devices
orm0: = <Option=20 ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe47ff,0xe4800-0xe4fff=20 on
isa0
fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6=20 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: = <1440-KB 3.5"=20 drive> on fdc0 drive 0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6=20 bmaddr=3D0x0000
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on = isa0
ata1:=20 iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x0000
ata1 at port = 0x170-0x177,0x376=20 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg = Test -=20 ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port = 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status = reg test=20 failed ff
aha0: status reg test failed ff
aha0: status reg test = failed=20 ff
aha0: status reg test failed ff
aha0: status reg test failed = ff
aha0=20 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at = port=20 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at = port=20 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on=20 atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: = keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 = (2),=20 config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: = <PS/2=20 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device = ID=20 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet = size:4
psm0:=20 syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port = 0x3c0-0x3df=20 iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5),=20 flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 = 0x20000
fb0:=20 init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 = size:32k=20 gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 = 00 00 03=20 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 = 1f=20 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 = 0f 08 00=20 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 = 10 00 10=20 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e = 8f 28 1f=20 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 = 0f 08 00=20 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode = 24
50 18 10=20 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 = 9c 8e 8f=20 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f = 0c 00 0f=20 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags = 0x100 on=20 isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, = kbd0,=20 terminal emulator: sc (syscons terminal)
pcic0 failed to probe at = port 0x3e0=20 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: = 0x41=20 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0
sio0:=20 type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port = 0x2f8-0x2ff=20 irq 3 on isa0
sio1: type 16550A
sio2: not probed = (disabled)
sio3: not=20 probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using = extended=20 I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port=20 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in = COMPATIBLE=20 mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0=20 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven=20 port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at = port=20 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port=20 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 = irq 10 on=20 isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 = failed to=20 probe at port 0x300-0x31f on isa0
sn0 failed to probe at port = 0x300-0x30f irq=20 10 on isa0
isa_probe_children: probing PnP devices
BIOS=20 Geometries:
 0:022afe3f 0..554=3D555 cylinders, 0..254=3D255 = heads, 1..63=3D63=20 sectors
 1:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 = heads, 1..63=3D63=20 sectors
 0 accounted for
Device configuration = finished.
bpf: lo0=20 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 63109a, net = 67149a
bpf: sl0 attached
bpf: faith0 attached
Waiting 15 = seconds for=20 SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset = delivered. 0=20 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 = SCBs=20 aborted.
(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff=20 0
(probe5:ahc0:0:5:0): ILLEGAL REQUEST = asc:24,0
(probe5:ahc0:0:5:0):=20 Invalid field in CDB
(ahc0:A:5:0): Sending SDTR period c, offset=20 f
(ahc0:A:5:0): Received SDTR period c, offset=20 f
        Filtered to period c, = offset=20 f
ahc0: target 5 synchronous at 20.0MHz, offset =3D = 0xf
(ahc0:A:5:0):=20 Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, = offset=20 f
        Filtered to period c, = offset=20 f
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 = filtered to=20 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR = period=20 c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset=20 8
        Filtered to period c, = offset=20 8
ahc0: target 0 synchronous at 20.0MHz, offset =3D = 0x8
(ahc0:A:1:0):=20 Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: = target 1=20 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period c, offset=20 8
(ahc0:A:1:0): Received SDTR period c, offset=20 8
        Filtered to period c, = offset=20 8
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x8
Creating = DISK=20 da0
Creating DISK da1
Creating DISK cd0
pass0 at ahc0 bus 0 = target 0=20 lun 0
pass0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2=20 device
pass0: Serial Number RD467983
pass0: 40.000MB/s transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
pass1 at = ahc0 bus 0=20 target 1 lun 0
pass1: <IBM DDRS-39130W S97B> Fixed Direct = Access SCSI-2=20 device
pass1: Serial Number REG08270
pass1: 40.000MB/s transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
pass2 at = ahc0 bus 0=20 target 5 lun 0
pass2: <NEC CD-ROM DRIVE:465 1.03> Removable = CD-ROM=20 SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset=20 15)
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): = Received=20 SDTR period c, offset f
        = Filtered=20 to period c, offset f
Mounting root from = ufs:/dev/da0s1a
(ahc0:A:5:0):=20 Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, = offset=20 f
        Filtered to period c, = offset=20 f
(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 = 0=20 0
(cd0:ahc0:0:5:0): NOT READY asc:3a,0
(cd0:ahc0:0:5:0): Medium = not=20 present
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM = DRIVE:465=20 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers = (20.000MHz,=20 offset 15)
cd0: Attempt to query device size failed: NOT READY, = Medium not=20 present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-39130W = S97B>=20 Fixed Direct Access SCSI-2 device
da1: Serial Number REG08270
da1: = 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing=20 Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T = 1111C)
da0 at=20 ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560W S97B> Fixed = Direct=20 Access SCSI-2 device
da0: Serial Number RD467983
da0: 40.000MB/s = transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB = (8925000=20 512 byte sectors: 255H 63S/T 555C)
da0s1: type 0xa5, start 63, end = =3D 8916074,=20 size 8916012 : OK
start_init: trying /sbin/init
da1s1: type 0xa5, = start=20 63, end =3D 17848214, size 17848152 : OK
da1s1: type 0xa5, start 63, = end =3D=20 17848214, size 17848152 : OK
splash: image decoder found: = logo_saver
Linux=20 ELF exec handler installed
MPTABLE:

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D
 
MPTable, version 2.0.15
 
--------------------------------------------------------------------= -----------
 
MP Floating Pointer Structure:
 
 =20 location:          &nbs= p;         =20 BIOS
  physical=20 address:           = ; =20 0x000f9e00
 =20 signature:          &nb= sp;        =20 '_MP_'
 =20 length:           =            =20 16 bytes
 =20 version:           = ;          =20 1.4
 =20 checksum:          &nbs= p;         =20 0xe3
 =20 mode:           &n= bsp;           &nb= sp;=20 Virtual Wire
 
--------------------------------------------------------------------= -----------
 
MP Config Table Header:
 
  physical=20 address:           = ; =20 0x000f9e10
 =20 signature:          &nb= sp;        =20 'PCMP'
  base table=20 length:           = =20 276
 =20 version:           = ;          =20 1.4
 =20 checksum:          &nbs= p;         =20 0xfd
  OEM=20 ID:           &nbs= p;          =20 'ACER    '
  Product=20 ID:           &nbs= p;      =20 'M9LD        '
  OEM table=20 pointer:           = ;=20 0x00000000
  OEM table=20 size:           &n= bsp;  =20 0
  entry=20 count:           &= nbsp;     =20 26
  local APIC=20 address:          =20 0xfee00000
  extended table=20 length:        0
  extended = table=20 checksum:      0
 
--------------------------------------------------------------------= -----------
 
MP Config Base Table Entries:
 
--
Processors:     APIC ID Version=20 State           = Family =20 Model   Step   =20 Flags
          &nbs= p;     =20 0       0x11    BSP,=20 usable     6      =20 5       = 2      =20 0x183fbff
          =       =20 1       0x11    AP,=20 usable      = 6      =20 5       = 2      =20 0x183fbff
--
Bus:        &n= bsp;  =20 Bus ID =20 Type
           = ;     =20 0      =20 PCI
           =      =20 1      =20 PCI
           =      =20 2       ISA
--
I/O=20 APICs:      APIC ID Version=20 State          =20 Address
          &n= bsp;     =20 2       0x11   =20 usable         =20 0xfec00000
--
I/O Ints:      =20 Type    Polarity   =20 Trigger     Bus ID   IRQ    = APIC ID=20 PIN#
           = ;    =20 INT     = active-hi       =20 edge        2     = 0          = 2   =20 0
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 1          = 2   =20 1
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 0          = 2   =20 2
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 3          = 2   =20 3
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 4          = 2   =20 4
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 5          = 2   =20 5
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 6          = 2   =20 6
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 7          = 2   =20 7
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 8          = 2   =20 8
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 9          = 2   =20 9
           &n= bsp;   =20 INT     = active-hi      =20 level        2   =20 10          2  =20 10
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 11          2  =20 11
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 12          2  =20 12
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 14          2  =20 14
           &= nbsp;   =20 INT     = active-hi      =20 level        2   =20 15          2  =20 15
           &= nbsp;   =20 INT     = active-lo      =20 level        0 =20 16:A          2   = 19
           &= nbsp;   =20 INT     = active-lo      =20 level        1  =20 6:A          2  =20 22
           &= nbsp;   =20 INT     = active-lo      =20 level        1 =20 10:A          2   = 23
--
Local Ints:     Type   =20 Polarity    Trigger     Bus = ID  =20 IRQ    APIC ID=20 PIN#
           = ;    =20 ExtINT  active-hi       =20 edge        2     = 0        255   =20 0
           &n= bsp;   =20 NMI     = active-hi       =20 edge        2     = 0        255    = 1
 
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D
 
------=_NextPart_000_0007_01C232AC.48122E70-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Jul 23 23:50:14 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A5EB537B400 for ; Tue, 23 Jul 2002 23:50:11 -0700 (PDT) Received: from web21109.mail.yahoo.com (web21109.mail.yahoo.com [216.136.227.111]) by mx1.FreeBSD.org (Postfix) with SMTP id 5B58443E5E for ; Tue, 23 Jul 2002 23:50:11 -0700 (PDT) (envelope-from hitmaster2k@yahoo.com) Message-ID: <20020724065011.21403.qmail@web21109.mail.yahoo.com> Received: from [62.254.0.5] by web21109.mail.yahoo.com via HTTP; Tue, 23 Jul 2002 23:50:11 PDT Date: Tue, 23 Jul 2002 23:50:11 -0700 (PDT) From: Hiten Pandya Reply-To: hiten@uk.FreeBSD.org Subject: Re: Unable to boot dual PII system To: /Dev/Ghost , freebsd-smp@FreeBSD.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --- /Dev/Ghost wrote: > Hello everyone ! > > I recently came across a acer altos 9100b, dual PII-400 with 1G ram. I've > decided to install FreeBSD 4.6 (ISO) on it to be my main server. This is > not my first FreeBSD install but it is the first on a multi-processors > machine. I compiled a new kernel ( un-commented both SMP options, config, > make, make install ) but now it refuses to boot. If I boot with kernel.old > it is ok ( dmesg ( boot -v ) and mptable at end of message). With the > SMP-kernel, just after the line that says: "Waiting 15 seconds for SCSI > devices to settle" I get the following lines: > > SMP: AP CPU #1 Launched! > SMP: CPU1 apic_initialize(); > lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x0000001ff Hi. FYI, Have you checked your BIOS for any abnormalities? what motherboard do you have? Have you enabled the MP 1.4 in the BIOS? Regards. -- Hiten __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Jul 23 23:57:47 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E19437B400 for ; Tue, 23 Jul 2002 23:57:46 -0700 (PDT) Received: from flamingo.mail.pas.earthlink.net (flamingo.mail.pas.earthlink.net [207.217.120.232]) by mx1.FreeBSD.org (Postfix) with ESMTP id 09F8A43E42 for ; Tue, 23 Jul 2002 23:57:46 -0700 (PDT) (envelope-from tlambert2@mindspring.com) Received: from pool0254.cvx40-bradley.dialup.earthlink.net ([216.244.42.254] helo=mindspring.com) by flamingo.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 17XG5V-0002hf-00; Tue, 23 Jul 2002 23:57:33 -0700 Message-ID: <3D3E4FA9.531CA1B0@mindspring.com> Date: Tue, 23 Jul 2002 23:56:41 -0700 From: Terry Lambert X-Mailer: Mozilla 4.79 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: hiten@uk.FreeBSD.org Cc: /Dev/Ghost , freebsd-smp@FreeBSD.org Subject: Re: Unable to boot dual PII system References: <20020724065011.21403.qmail@web21109.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hiten Pandya wrote: > FYI, Have you checked your BIOS for any abnormalities? I checked the BIOS on my machine. The BIOSoscopy indicated polyps in the SCSI driver. What do I do now? 8-) 8-) 8-). -- Terry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 8: 8:42 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D436B37B406 for ; Wed, 24 Jul 2002 08:08:32 -0700 (PDT) Received: from proton.hexanet.fr (proton.hexanet.fr [81.23.32.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id C888643E31 for ; Wed, 24 Jul 2002 08:08:29 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.12.3/8.12.3) with SMTP id g6OF8QJU003244 for ; Wed, 24 Jul 2002 17:08:27 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Wed, 24 Jul 2002 17:08:26 +0200 From: Christophe Prevotaux To: smp@freebsd.org Subject: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Message-Id: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr> Organization: HEXANET Sarl X-Mailer: Sylpheed version 0.8.0 (GTK+ 1.2.10; i386-portbld-freebsd4.6) X-NCC-RegID: fr.hexanet Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hello I am running : FreeBSD 4.6-RELEASE-p2 (SMP) on a ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) which had a onboard 'fxp' network card in my PCI slots I have : 1 ATM adapter Forerunner PCA200E-SMF 155Mbps 1 DLINK 500SX Gigabit Ethernet adapter With this configuration I have several problems some of which may or may not be SMP related but I can't really tell so I need your help. 1) the "lge" driver hangs sometimes for unknown reason 2) the "hfa" driver will do the same(and interested people can looks at the atm@freebsd.org mailing list for details I have posted) 3) In order to see if these problem where SMP related I proceeded to switch my KERNEL to non SMP a) After recompiling my KERNEL to non SMP (standard kernel) my 2 PCI based network card (lge0) and (hfa0) refused to work , they are detected at boot time , and get configured properly , but no network traffic goes thru (apart from pinging the IP of the interface itself. b) when recompiling in SMP kernel mode , everything works as before c) when recompiling in NON SMP KERNEL mode and removing a processor physically (replacing it with the needed tab (terminator)) it won't work just as in point (a) I am at a loss , I do not understand what is going on, I can't believe anything else than the kernel (and maybe modules) need to be recompiled in order to work properly. What should I do ? -- -- =============================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 BP202 Fax: +33 (0)3 26 79 30 06 51686 Reims Cedex 2 FRANCE HEXANET Network Operation Center =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 8:48:28 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9C7B037B401 for ; Wed, 24 Jul 2002 08:48:24 -0700 (PDT) Received: from web9908.mail.yahoo.com (web9908.mail.yahoo.com [216.136.129.251]) by mx1.FreeBSD.org (Postfix) with SMTP id AFD7343E3B for ; Wed, 24 Jul 2002 08:48:02 -0700 (PDT) (envelope-from hefbone@yahoo.com) Message-ID: <20020724154743.83904.qmail@web9908.mail.yahoo.com> Received: from [208.235.153.34] by web9908.mail.yahoo.com via HTTP; Wed, 24 Jul 2002 08:47:43 PDT Date: Wed, 24 Jul 2002 08:47:43 -0700 (PDT) From: Jeremy Subject: kernel compiling To: freebsd-smp@freebsd.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-767006229-1027525663=:83486" Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --0-767006229-1027525663=:83486 Content-Type: text/plain; charset=us-ascii All, I am having a bit of a problem getting dual processors to work under freebsd. I edited my kernel with these options options SMP options APIC_IO then I did a config KERNEL-SMP cd ../../compile/KERNEL-SMP make depend; make ; make install anything that I am missing --------------------------------- Do You Yahoo!? Yahoo! Health - Feel better, live better --0-767006229-1027525663=:83486 Content-Type: text/html; charset=us-ascii

All, I am having a bit of a problem getting dual processors to work under freebsd. I edited my kernel with these options

options  SMP

options  APIC_IO

 

then I did a config KERNEL-SMP

cd ../../compile/KERNEL-SMP

make depend; make ; make install

 

anything that I am missing


Do You Yahoo!?
Yahoo! Health - Feel better, live better --0-767006229-1027525663=:83486-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 8:49:40 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DB9FF37B406 for ; Wed, 24 Jul 2002 08:49:33 -0700 (PDT) Received: from proton.hexanet.fr (proton.hexanet.fr [81.23.32.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3247443E70 for ; Wed, 24 Jul 2002 08:49:06 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.12.3/8.12.3) with SMTP id g6OFm0JU003377; Wed, 24 Jul 2002 17:48:00 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Wed, 24 Jul 2002 17:48:00 +0200 From: Christophe Prevotaux To: "Lawrence Farr" Cc: freebsd-smp@freebsd.org Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Message-Id: <20020724174800.30c3cd31.c.prevotaux@hexanet.fr> In-Reply-To: <000a01c23328$e14d4080$c806a8c0@lfarr> References: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr> <000a01c23328$e14d4080$c806a8c0@lfarr> Organization: HEXANET Sarl X-Mailer: Sylpheed version 0.8.0 (GTK+ 1.2.10; i386-portbld-freebsd4.6) X-NCC-RegID: fr.hexanet Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org uhmm ok however I have no PCI RIDER and the board are brand new in fact I have 2 exact same machines (exact same down to the last component) and both have the same problems. I seriously doubt I have 2 defective machines On Wed, 24 Jul 2002 16:43:39 +0100 "Lawrence Farr" wrote: > I've had a similar problem with a damaged PCI riser, and also > quite similar problems when using make -j whatever. > > Lawrence Farr > EPC Direct Limited > > > -----Original Message----- > > From: owner-freebsd-smp@FreeBSD.ORG > > [mailto:owner-freebsd-smp@FreeBSD.ORG] On Behalf Of > > Christophe Prevotaux > > Sent: 24 July 2002 16:08 > > To: smp@freebsd.org > > Subject: SMP --> NORMAL KERNEL on a dual proc machine [HELP] > > > > > > Hello > > > > I am running : > > > > FreeBSD 4.6-RELEASE-p2 (SMP) > > > > on a > > > > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > > which had a onboard 'fxp' network card > > > > in my PCI slots I have : > > > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > > 1 DLINK 500SX Gigabit Ethernet adapter > > > > > > With this configuration I have several problems some of which > > may or may not be SMP related but I can't really tell so I need your > > help. > > > > > > 1) the "lge" driver hangs sometimes for unknown reason > > 2) the "hfa" driver will do the same(and interested people > > can looks at the atm@freebsd.org mailing list for details I > > have posted) > > > > > > 3) In order to see if these problem where SMP related I > > proceeded to switch > > my KERNEL to non SMP > > > > a) After recompiling my KERNEL to non SMP (standard kernel) > > my 2 PCI based > > network card (lge0) and (hfa0) refused to work , they > > are detected at boot > > time , and get configured properly , but no network > > traffic goes thru (apart > > from pinging the IP of the interface itself. > > > > b) when recompiling in SMP kernel mode , everything works as before > > > > c) when recompiling in NON SMP KERNEL mode and removing a > > processor physically > > (replacing it with the needed tab (terminator)) it > > won't work just as in point (a) > > > > > > I am at a loss , I do not understand what is going on, I > > can't believe anything else than the > > kernel (and maybe modules) need to be recompiled in order to > > work properly. > > > > What should I do ? > > > > > > > > -- > > -- > > =============================================================== > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > HEXANET SARL URL: http://www.hexanet.fr/ > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > BP202 Fax: +33 (0)3 26 79 30 06 > > 51686 Reims Cedex 2 > > FRANCE HEXANET Network Operation Center > > =============================================================== > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-smp" in the body of the message > > > > -- -- =============================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 BP202 Fax: +33 (0)3 26 79 30 06 51686 Reims Cedex 2 FRANCE HEXANET Network Operation Center =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 8:59:32 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7DBDD37B400 for ; Wed, 24 Jul 2002 08:59:25 -0700 (PDT) Received: from alpha.yumyumyum.org (dsl092-171-091.wdc1.dsl.speakeasy.net [66.92.171.91]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9A18B43E6E for ; Wed, 24 Jul 2002 08:59:24 -0700 (PDT) (envelope-from culverk@yumyumyum.org) Received: from alpha.yumyumyum.org (localhost [127.0.0.1]) by alpha.yumyumyum.org (8.12.5/8.12.3) with ESMTP id g6OFxC3H008835; Wed, 24 Jul 2002 11:59:12 -0400 (EDT) (envelope-from culverk@yumyumyum.org) Received: from localhost (culverk@localhost) by alpha.yumyumyum.org (8.12.5/8.12.3/Submit) with ESMTP id g6OFxB0R008832; Wed, 24 Jul 2002 11:59:11 -0400 (EDT) (envelope-from culverk@yumyumyum.org) X-Authentication-Warning: alpha.yumyumyum.org: culverk owned process doing -bs Date: Wed, 24 Jul 2002 11:59:11 -0400 (EDT) From: Kenneth Culver To: Christophe Prevotaux Cc: smp@FreeBSD.ORG Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] In-Reply-To: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr> Message-ID: <20020724115854.F8800-100000@alpha.yumyumyum.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org are you using modules for your network cards? did you recompile the modules? Ken On Wed, 24 Jul 2002, Christophe Prevotaux wrote: > Hello > > I am running : > > FreeBSD 4.6-RELEASE-p2 (SMP) > > on a > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > which had a onboard 'fxp' network card > > in my PCI slots I have : > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > 1 DLINK 500SX Gigabit Ethernet adapter > > > With this configuration I have several problems some of which > may or may not be SMP related but I can't really tell so I need your > help. > > > 1) the "lge" driver hangs sometimes for unknown reason > 2) the "hfa" driver will do the same(and interested people > can looks at the atm@freebsd.org mailing list for details I have posted) > > > 3) In order to see if these problem where SMP related I proceeded to swit= ch > my KERNEL to non SMP > > a) After recompiling my KERNEL to non SMP (standard kernel) my 2 PCI ba= sed > network card (lge0) and (hfa0) refused to work , they are detected a= t boot > time , and get configured properly , but no network traffic goes thr= u (apart > from pinging the IP of the interface itself. > > b) when recompiling in SMP kernel mode , everything works as before > > c) when recompiling in NON SMP KERNEL mode and removing a processor ph= ysically > (replacing it with the needed tab (terminator)) it won't work just = as in point (a) > > > I am at a loss , I do not understand what is going on, I can't believe an= ything else than the > kernel (and maybe modules) need to be recompiled in order to work properl= y. > > What should I do ? > > > > -- > -- > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > 3 All=E9e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > BP202 Fax: +33 (0)3 26 79 30 06 > 51686 Reims Cedex 2 > FRANCE HEXANET Network Operation Center > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 9:25:18 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B968437B400 for ; Wed, 24 Jul 2002 09:25:12 -0700 (PDT) Received: from proton.hexanet.fr (proton.hexanet.fr [81.23.32.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id B9A7E43E70 for ; Wed, 24 Jul 2002 09:25:10 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.12.3/8.12.3) with SMTP id g6OGP7JU003554; Wed, 24 Jul 2002 18:25:07 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Wed, 24 Jul 2002 18:25:07 +0200 From: Christophe Prevotaux To: Kenneth Culver Cc: smp@FreeBSD.ORG Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Message-Id: <20020724182507.29b0bda8.c.prevotaux@hexanet.fr> In-Reply-To: <20020724115854.F8800-100000@alpha.yumyumyum.org> References: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr> <20020724115854.F8800-100000@alpha.yumyumyum.org> Organization: HEXANET Sarl X-Mailer: Sylpheed version 0.8.0 (GTK+ 1.2.10; i386-portbld-freebsd4.6) X-NCC-RegID: fr.hexanet Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org no I am not using modules (but I did recompile the modules anyway ) On Wed, 24 Jul 2002 11:59:11 -0400 (EDT) Kenneth Culver wrote: > are you using modules for your network cards? did you recompile the > modules? > > Ken > > On Wed, 24 Jul 2002, Christophe Prevotaux wrote: > > > Hello > > > > I am running : > > > > FreeBSD 4.6-RELEASE-p2 (SMP) > > > > on a > > > > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > > which had a onboard 'fxp' network card > > > > in my PCI slots I have : > > > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > > 1 DLINK 500SX Gigabit Ethernet adapter > > > > > > With this configuration I have several problems some of which > > may or may not be SMP related but I can't really tell so I need your > > help. > > > > > > 1) the "lge" driver hangs sometimes for unknown reason > > 2) the "hfa" driver will do the same(and interested people > > can looks at the atm@freebsd.org mailing list for details I have posted) > > > > > > 3) In order to see if these problem where SMP related I proceeded to switch > > my KERNEL to non SMP > > > > a) After recompiling my KERNEL to non SMP (standard kernel) my 2 PCI based > > network card (lge0) and (hfa0) refused to work , they are detected at boot > > time , and get configured properly , but no network traffic goes thru (apart > > from pinging the IP of the interface itself. > > > > b) when recompiling in SMP kernel mode , everything works as before > > > > c) when recompiling in NON SMP KERNEL mode and removing a processor physically > > (replacing it with the needed tab (terminator)) it won't work just as in point (a) > > > > > > I am at a loss , I do not understand what is going on, I can't believe anything else than the > > kernel (and maybe modules) need to be recompiled in order to work properly. > > > > What should I do ? > > > > > > > > -- > > -- > > =============================================================== > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > HEXANET SARL URL: http://www.hexanet.fr/ > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > BP202 Fax: +33 (0)3 26 79 30 06 > > 51686 Reims Cedex 2 > > FRANCE HEXANET Network Operation Center > > =============================================================== > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-smp" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > -- -- =============================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 BP202 Fax: +33 (0)3 26 79 30 06 51686 Reims Cedex 2 FRANCE HEXANET Network Operation Center =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 9:42:16 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EC65C37B400 for ; Wed, 24 Jul 2002 09:42:07 -0700 (PDT) Received: from proton.hexanet.fr (proton.hexanet.fr [81.23.32.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4D8F043E65 for ; Wed, 24 Jul 2002 09:42:05 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.12.3/8.12.3) with SMTP id g6OGg1JU003666; Wed, 24 Jul 2002 18:42:01 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Wed, 24 Jul 2002 18:42:01 +0200 From: Christophe Prevotaux To: "Lawrence Farr" Cc: smp@freebsd.org Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Message-Id: <20020724184201.593cc176.c.prevotaux@hexanet.fr> In-Reply-To: <001301c2332e$070119a0$c806a8c0@lfarr> References: <20020724181512.6d61169f.c.prevotaux@hexanet.fr> <001301c2332e$070119a0$c806a8c0@lfarr> Organization: HEXANET Sarl X-Mailer: Sylpheed version 0.8.0 (GTK+ 1.2.10; i386-portbld-freebsd4.6) X-NCC-RegID: fr.hexanet Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org MP version in the BIOS ??? I have not seen such a thing I have to check On Wed, 24 Jul 2002 17:20:29 +0100 "Lawrence Farr" wrote: > No, this usually breaks things! What MP version do you have it > set on in the BIOS? Have you get Plug and Play disabled in the > BIOS? > > Lawrence Farr > EPC Direct Limited > > > -----Original Message----- > > From: Christophe Prevotaux [mailto:c.prevotaux@hexanet.fr] > > Sent: 24 July 2002 17:15 > > To: Lawrence Farr > > Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] > > > > > > On Wed, 24 Jul 2002 16:51:51 +0100 > > "Lawrence Farr" wrote: > > > > > So did you do a make -j build? > > > > no , why do I need to do this ? can you explain ? > > > > > > > > > > Lawrence Farr > > > EPC Direct Limited > > > > > > > -----Original Message----- > > > > From: owner-freebsd-smp@FreeBSD.ORG > > > > [mailto:owner-freebsd-smp@FreeBSD.ORG] On Behalf Of > > > > Christophe Prevotaux > > > > Sent: 24 July 2002 16:48 > > > > To: Lawrence Farr > > > > Cc: freebsd-smp@freebsd.org > > > > Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] > > > > > > > > > > > > uhmm ok however I have no PCI RIDER > > > > and the board are brand new in fact I have 2 exact same > > > > machines (exact same down to the last component) and both > > > > have the same problems. > > > > > > > > I seriously doubt I have 2 defective machines > > > > > > > > > > > > On Wed, 24 Jul 2002 16:43:39 +0100 > > > > "Lawrence Farr" wrote: > > > > > > > > > I've had a similar problem with a damaged PCI riser, and also > > > > > quite similar problems when using make -j whatever. > > > > > > > > > > Lawrence Farr > > > > > EPC Direct Limited > > > > > > > > > > > -----Original Message----- > > > > > > From: owner-freebsd-smp@FreeBSD.ORG > > > > > > [mailto:owner-freebsd-smp@FreeBSD.ORG] On Behalf Of > > > > > > Christophe Prevotaux > > > > > > Sent: 24 July 2002 16:08 > > > > > > To: smp@freebsd.org > > > > > > Subject: SMP --> NORMAL KERNEL on a dual proc machine [HELP] > > > > > > > > > > > > > > > > > > Hello > > > > > > > > > > > > I am running : > > > > > > > > > > > > FreeBSD 4.6-RELEASE-p2 (SMP) > > > > > > > > > > > > on a > > > > > > > > > > > > > > > > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > > > > > > which had a onboard 'fxp' network card > > > > > > > > > > > > in my PCI slots I have : > > > > > > > > > > > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > > > > > > 1 DLINK 500SX Gigabit Ethernet adapter > > > > > > > > > > > > > > > > > > With this configuration I have several problems some of which > > > > > > may or may not be SMP related but I can't really tell so > > > > I need your > > > > > > help. > > > > > > > > > > > > > > > > > > 1) the "lge" driver hangs sometimes for unknown reason > > > > > > 2) the "hfa" driver will do the same(and interested people > > > > > > can looks at the atm@freebsd.org mailing list for details I > > > > > > have posted) > > > > > > > > > > > > > > > > > > 3) In order to see if these problem where SMP related I > > > > > > proceeded to switch > > > > > > my KERNEL to non SMP > > > > > > > > > > > > a) After recompiling my KERNEL to non SMP (standard kernel) > > > > > > my 2 PCI based > > > > > > network card (lge0) and (hfa0) refused to work , they > > > > > > are detected at boot > > > > > > time , and get configured properly , but no network > > > > > > traffic goes thru (apart > > > > > > from pinging the IP of the interface itself. > > > > > > > > > > > > b) when recompiling in SMP kernel mode , everything > > > > works as before > > > > > > > > > > > > c) when recompiling in NON SMP KERNEL mode and removing a > > > > > > processor physically > > > > > > (replacing it with the needed tab (terminator)) it > > > > > > won't work just as in point (a) > > > > > > > > > > > > > > > > > > I am at a loss , I do not understand what is going on, I > > > > > > can't believe anything else than the > > > > > > kernel (and maybe modules) need to be recompiled in order to > > > > > > work properly. > > > > > > > > > > > > What should I do ? > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > -- > > > > > > > > =============================================================== > > > > > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > > > > > HEXANET SARL URL: http://www.hexanet.fr/ > > > > > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > > > > > 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > > > > > BP202 Fax: +33 (0)3 26 79 30 06 > > > > > > 51686 Reims Cedex 2 > > > > > > FRANCE HEXANET Network Operation Center > > > > > > > > > > > > =============================================================== > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > > with "unsubscribe freebsd-smp" in the body of the message > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > -- > > > > =============================================================== > > > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > > > HEXANET SARL URL: http://www.hexanet.fr/ > > > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > > > 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > > > BP202 Fax: +33 (0)3 26 79 30 06 > > > > 51686 Reims Cedex 2 > > > > FRANCE HEXANET Network Operation Center > > > > > > =============================================================== > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-smp" in the body of the message > > > > > > > > > > > > > > > > -- > > -- > > =============================================================== > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > HEXANET SARL URL: http://www.hexanet.fr/ > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > BP202 Fax: +33 (0)3 26 79 30 06 > > 51686 Reims Cedex 2 > > FRANCE HEXANET Network Operation Center > > =============================================================== > > > > -- -- =============================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 3 All้e Thierry Sabine Direct: +33 (0)3 26 61 77 72 BP202 Fax: +33 (0)3 26 79 30 06 51686 Reims Cedex 2 FRANCE HEXANET Network Operation Center =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 9:53:45 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB10037B407 for ; Wed, 24 Jul 2002 09:53:38 -0700 (PDT) Received: from alpha.yumyumyum.org (dsl092-171-091.wdc1.dsl.speakeasy.net [66.92.171.91]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB03E43E65 for ; Wed, 24 Jul 2002 09:53:37 -0700 (PDT) (envelope-from culverk@yumyumyum.org) Received: from alpha.yumyumyum.org (localhost [127.0.0.1]) by alpha.yumyumyum.org (8.12.5/8.12.3) with ESMTP id g6OGrO3H009043; Wed, 24 Jul 2002 12:53:25 -0400 (EDT) (envelope-from culverk@yumyumyum.org) Received: from localhost (culverk@localhost) by alpha.yumyumyum.org (8.12.5/8.12.3/Submit) with ESMTP id g6OGrNOD009040; Wed, 24 Jul 2002 12:53:24 -0400 (EDT) (envelope-from culverk@yumyumyum.org) X-Authentication-Warning: alpha.yumyumyum.org: culverk owned process doing -bs Date: Wed, 24 Jul 2002 12:53:23 -0400 (EDT) From: Kenneth Culver To: Christophe Prevotaux Cc: smp@FreeBSD.ORG Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] In-Reply-To: <20020724182507.29b0bda8.c.prevotaux@hexanet.fr> Message-ID: <20020724125237.A8860-100000@alpha.yumyumyum.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org OK, well I don't know then, I use -CURRENT for my smp machine and have never had problems like this. Ken On Wed, 24 Jul 2002, Christophe Prevotaux wrote: > no I am not using modules (but I did recompile the modules anyway ) > > On Wed, 24 Jul 2002 11:59:11 -0400 (EDT) > Kenneth Culver wrote: > > > are you using modules for your network cards? did you recompile the > > modules? > > > > Ken > > > > On Wed, 24 Jul 2002, Christophe Prevotaux wrote: > > > > > Hello > > > > > > I am running : > > > > > > FreeBSD 4.6-RELEASE-p2 (SMP) > > > > > > on a > > > > > > > > > ASUS CUV4X-DLS Dual Processors motherboard (With 2 processors) > > > which had a onboard 'fxp' network card > > > > > > in my PCI slots I have : > > > > > > 1 ATM adapter Forerunner PCA200E-SMF 155Mbps > > > 1 DLINK 500SX Gigabit Ethernet adapter > > > > > > > > > With this configuration I have several problems some of which > > > may or may not be SMP related but I can't really tell so I need your > > > help. > > > > > > > > > 1) the "lge" driver hangs sometimes for unknown reason > > > 2) the "hfa" driver will do the same(and interested people > > > can looks at the atm@freebsd.org mailing list for details I have post= ed) > > > > > > > > > 3) In order to see if these problem where SMP related I proceeded to = switch > > > my KERNEL to non SMP > > > > > > a) After recompiling my KERNEL to non SMP (standard kernel) my 2 PC= I based > > > network card (lge0) and (hfa0) refused to work , they are detect= ed at boot > > > time , and get configured properly , but no network traffic goes= thru (apart > > > from pinging the IP of the interface itself. > > > > > > b) when recompiling in SMP kernel mode , everything works as befor= e > > > > > > c) when recompiling in NON SMP KERNEL mode and removing a processo= r physically > > > (replacing it with the needed tab (terminator)) it won't work j= ust as in point (a) > > > > > > > > > I am at a loss , I do not understand what is going on, I can't believ= e anything else than the > > > kernel (and maybe modules) need to be recompiled in order to work pro= perly. > > > > > > What should I do ? > > > > > > > > > > > > -- > > > -- > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > > > HEXANET SARL URL: http://www.hexanet.fr/ > > > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > > > 3 All=E9e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > > > BP202 Fax: +33 (0)3 26 79 30 06 > > > 51686 Reims Cedex 2 > > > FRANCE HEXANET Network Operation Center > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-smp" in the body of the message > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-smp" in the body of the message > > > > > -- > -- > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05 > 3 All=E9e Thierry Sabine Direct: +33 (0)3 26 61 77 72 > BP202 Fax: +33 (0)3 26 79 30 06 > 51686 Reims Cedex 2 > FRANCE HEXANET Network Operation Center > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 11:39:34 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9CFC437B400 for ; Wed, 24 Jul 2002 11:39:32 -0700 (PDT) Received: from herbelot.dyndns.org (d108.dhcp212-198-26.noos.fr [212.198.26.108]) by mx1.FreeBSD.org (Postfix) with ESMTP id DE3E843E67 for ; Wed, 24 Jul 2002 11:39:30 -0700 (PDT) (envelope-from thierry@herbelot.com) Received: from tulipe.herbelot.nom (tulipe.herbelot.nom [192.168.2.5]) by herbelot.dyndns.org (8.9.3/8.9.3) with ESMTP id UAA46519; Wed, 24 Jul 2002 20:38:54 +0200 (CEST) (envelope-from thierry@herbelot.com) Content-Type: text/plain; charset="iso-8859-1" From: Thierry Herbelot To: Christophe Prevotaux , "Lawrence Farr" Subject: Re: SMP --> NORMAL KERNEL on a dual proc machine [HELP] Date: Wed, 24 Jul 2002 20:38:54 +0200 User-Agent: KMail/1.4.2 Cc: freebsd-smp@FreeBSD.ORG References: <20020724170826.56abc9ec.c.prevotaux@hexanet.fr> <000a01c23328$e14d4080$c806a8c0@lfarr> <20020724174800.30c3cd31.c.prevotaux@hexanet.fr> In-Reply-To: <20020724174800.30c3cd31.c.prevotaux@hexanet.fr> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200207242038.54142.thierry@herbelot.com> Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Le Wednesday 24 July 2002 17:48, Christophe Prevotaux a ้crit : > uhmm ok however I have no PCI RIDER > and the board are brand new in fact I have 2 exact same > machines (exact same down to the last component) and both > have the same problems. > > I seriously doubt I have 2 defective machines > Bonsoir, as there are problems on both machines, this could come from the motherboard itself : CUVX (must be using a VIA chipset ?) you could try and use another motherboard, with a "known good" chipset (such as the obslescent 440BX), to see if you have the same problems. I tried some time to use a Fore board (but it was with 4.2 or 4.2), and I could not get them to work. there were also messages about a rewrite of the hfa driver under current (the messages hinted to a malfunction of the hfa driver, IIRC). you may find these messages on the archives (or have a look at the commit logs for the hfa driver under current) Happy hacking TfH To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 19:29:33 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D286637B400 for ; Wed, 24 Jul 2002 19:29:32 -0700 (PDT) Received: from tspace.ru (ns.tspace.ru [217.106.36.67]) by mx1.FreeBSD.org (Postfix) with ESMTP id E766643E6A for ; Wed, 24 Jul 2002 19:29:30 -0700 (PDT) (envelope-from fsmp@tspace.ru) Received: from michael.tspace.ru (michael.tspace.ru [217.106.39.2]) by tspace.ru (8.9.3/8.9.3) with ESMTP id JAA25203 for ; Thu, 25 Jul 2002 09:29:28 +0700 (NOVST) (envelope-from fsmp@tspace.ru) Date: Thu, 25 Jul 2002 09:30:44 +0700 From: fsmp X-Mailer: The Bat! (v1.41) Reply-To: fsmp X-Priority: 2 (High) Message-ID: <6396.020725@tspace.ru> To: freebsd-smp@FreeBSD.org Subject: subscription Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org subscription To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jul 24 20:26:53 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 45F5137B406 for ; Wed, 24 Jul 2002 20:26:51 -0700 (PDT) Received: from tspace.ru (ns.tspace.ru [217.106.36.67]) by mx1.FreeBSD.org (Postfix) with ESMTP id EA41B43E31 for ; Wed, 24 Jul 2002 20:26:49 -0700 (PDT) (envelope-from fsmp@tspace.ru) Received: from michael.tspace.ru (michael.tspace.ru [217.106.39.2]) by tspace.ru (8.9.3/8.9.3) with ESMTP id KAA27746 for ; Thu, 25 Jul 2002 10:26:48 +0700 (NOVST) (envelope-from fsmp@tspace.ru) Date: Thu, 25 Jul 2002 10:28:03 +0700 From: fsmp X-Mailer: The Bat! (v1.41) Reply-To: fsmp X-Priority: 2 (High) Message-ID: <6436.020725@tspace.ru> To: freebsd-smp@FreeBSD.org Subject: subscribe Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Fri Jul 26 12:54:39 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B8B437B401 for ; Fri, 26 Jul 2002 12:54:38 -0700 (PDT) Received: from palrel10.hp.com (palrel10.hp.com [156.153.255.245]) by mx1.FreeBSD.org (Postfix) with ESMTP id 331F843E67 for ; Fri, 26 Jul 2002 12:54:32 -0700 (PDT) (envelope-from ssoldin@kona.cup.hp.com) Received: from kona.cup.hp.com (kona.cup.hp.com [15.16.128.29]) by palrel10.hp.com (Postfix) with ESMTP id AC0A0C00D3E for ; Fri, 26 Jul 2002 12:54:12 -0700 (PDT) Received: (from ssoldin@localhost) by kona.cup.hp.com (8.9.3 (PHNE_18979)/8.9.3 SMKit7.02) id MAA08235 for freebsd-smp@FreeBSD.org; Fri, 26 Jul 2002 12:52:52 -0700 (PDT) Date: Fri, 26 Jul 2002 12:52:52 -0700 (PDT) From: Shirley Soldin Message-Id: <200207261952.MAA08235@kona.cup.hp.com> To: freebsd-smp@FreeBSD.org Subject: subscribe Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message