Date: Sun, 29 Dec 2002 22:39:41 -0800 (PST) From: Gary Geisbert <gary@geisbert.com> To: freebsd-smp@freebsd.org Subject: 4.7-STABLE SMP kernel dies on Compaq Proliant ML530 Message-ID: <20021230063941.70726.qmail@web41304.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
I just updated to RELENG_4 today (12/29/02) and after building world and a SMP kernel, the system dies when booting right after: Programming 35 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Here is mptable: db2# mptable =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f4ff0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x00 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f28a8 signature: 'PCMP' base table length: 540 version: 1.4 checksum: 0xa3 OEM ID: 'COMPAQ ' Product ID: 'PROLIANT ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 59 local APIC address: 0xfee00000 extended table length: 252 extended table checksum: 112 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x10 BSP, usable 6 2 1 0x0381 0 0x10 AP, usable 6 8 3 0x383fb ff -- Bus: Bus ID Type 0 PCI 224 PCI 225 PCI 15 ISA -- I/O APICs: APIC ID Version State Address 8 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 0 8:A 8 31 INT active-lo level 0 8:B 8 31 INT active-lo level 0 8:C 8 31 INT active-lo level 0 8:D 8 31 INT active-lo level 225 8:A 8 30 INT active-lo level 225 8:B 8 30 INT active-lo level 225 8:C 8 30 INT active-lo level 225 8:D 8 30 INT active-lo level 225 7:A 8 29 INT active-lo level 225 7:B 8 29 INT active-lo level 225 7:C 8 29 INT active-lo level 225 7:D 8 29 INT active-lo level 225 6:A 8 28 INT active-lo level 225 6:B 8 28 INT active-lo level 225 6:C 8 28 INT active-lo level 225 6:D 8 28 INT active-lo level 225 9:A 8 27 INT active-lo level 225 9:B 8 27 INT active-lo level 225 9:C 8 27 INT active-lo level 225 9:D 8 27 INT active-lo level 225 5:A 8 26 INT active-lo level 225 5:B 8 26 INT active-lo level 225 5:C 8 26 INT active-lo level 225 5:D 8 26 INT active-lo level 224 5:A 8 25 INT active-lo level 224 5:B 8 25 INT active-lo level 224 5:C 8 25 INT active-lo level 224 5:D 8 25 INT active-lo level 224 6:A 8 24 INT active-lo level 224 6:B 8 24 INT active-lo level 224 6:C 8 24 INT active-lo level 224 6:D 8 24 INT active-lo level 225 4:A 8 22 INT active-lo level 225 4:B 8 21 INT active-hi edge 15 1 8 1 INT active-hi edge 15 0 8 2 INT active-hi edge 15 3 8 3 INT active-hi edge 15 4 8 4 INT active-hi edge 15 5 8 5 INT active-hi edge 15 6 8 6 INT active-hi edge 15 7 8 7 INT active-hi edge 15 8 8 8 INT active-hi edge 15 9 8 9 INT active-hi edge 15 10 8 10 INT active-hi edge 15 11 8 11 INT active-hi edge 15 12 8 12 INT active-lo level 15 13 8 13 INT active-hi edge 15 14 8 14 INT active-hi edge 15 15 8 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 15 0 255 0 NMI conforms conforms 15 0 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: Extended Table HOSED! db2# Any ideas? Thanks, -g To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021230063941.70726.qmail>