Date: Sun, 20 Jul 2003 20:58:38 +0100 (BST) From: Terry Glanfield <Terry.Glanfield@program-products.co.uk> To: freebsd-isdn@freebsd.org Subject: MultiTech MT128SA Message-ID: <200307201958.h6KJwcS04480@edam.ppsl>
next in thread | raw e-mail | index | archive | help
Hi, I have a MultiTech MT128SA PCI ISDN TA which I'm having trouble configuring. The card reports an ID of 0x88167506 which matches the Dynalink ID. I've put tracing in isic_pnp_probe but this function is not being called. I suspect something in the pnp information. Any help would be much appreciated. Regards, Terry. pnpinfo: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID ASU1688 (0x88167506), Serial Number 0x00000056 PnP Version 1.0, Vendor Version 0 Device Description: ISDN CARD .... Logical Device ID: ASU1688 0x88167506 #0 Device supports I/O Range Check I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x8 [not 16-bit addr] IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive IRQ: - only one type (true/edge) End Tag Successfully got 6 resources, 1 logical fdevs -- card select # 0x0001 CSN ASU1688 (0x88167506), Serial Number 0x00000056 Logical device #0 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 0 IO range check 0x00 activate 0x00 Relevant kernel info: device isic0 options DYNALINK pseudo-device "i4bq921" pseudo-device "i4bq931" pseudo-device "i4b" pseudo-device "i4btrc" 4 pseudo-device "i4bctl" pseudo-device "i4brbch" 4 pseudo-device "i4btel" 2 pseudo-device "i4bipr" 4 pseudo-device "i4bisppp" 4 dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #14: Sun Jul 20 20:27:08 GMT 2003 root@gate:/usr/obj/usr/src/sys/GATE Calibrating clock(s) ... TSC clock: 200472615 Hz, i8254 clock: 1193290 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (200.46-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00601000 - 0x01ff7fff, 27226112 bytes (6647 pages) avail memory = 26787840 (26160K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fadd0 bios32: Entry = 0xfb250 (c00fb250) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb280 pnpbios: Found PnP BIOS data at 0xc00fbdc0 pnpbios: Entry = f0000:bde8 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc05da000. Intel Pentium detected, installing workaround for F00F bug Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086) Using $PIR table, 6 entries at 0xc00fdb00 npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 175654312 bytes/sec bzero() bandwidth = 773993808 bytes/sec pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7100, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7110, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 00006400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x01 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00005000, size 4 found-> vendor=0x1002, dev=0x4755, revid=0x9a class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 24 map[14]: type 1, range 32, base 00006500, size 8 map[18]: type 1, range 32, base e1000000, size 12 pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=51 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 pci0: <ATI Mach64-GU graphics accelerator> (vendor=0x1002, dev=0x4755) at 11.0 isa0: if_ep: <3Com 3C509-TP EtherLink III> at port 0x300-0x310 irq 5 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 ASU1688: adding io range 0x100-0x3ff, size=0x8, align=0x8 ASU1688: adding irq mask 0x9e38 ASU1688: adding irq mask 0000 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 5 on isa0 ep0: Ethernet address 00:60:8c:50:bc:b8 bpf: ep0 attached fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x241 0x251 0x241 0x241 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x241 0x249 0x241 0x241 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: configured irq 7 not in bitmap of probed irqs 0 sio3: irq maps: 0x241 0x241 0x241 0x241 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 failed to probe at port 0x2e8-0x2ef irq 7 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <ISDN CARD ....> can't assign resources unknown: <ISDN CARD ....> at port 0x100-0x107 irq 9 on isa0 BIOS Geometries: 0:03fd3f3f 0..1021=1022 cylinders, 0..63=64 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c840, tty 63001a, net 67003a bpf: sl0 attached i4b: ISDN call control device attached i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached bpf: ipr0 attached bpf: ipr1 attached bpf: ipr2 attached bpf: ipr3 attached i4bctl: ISDN system control port attached i4btrc: 4 ISDN trace device(s) attached bpf: faith0 attached i4bisppp: 4 ISDN SyncPPP device(s) attached bpf: isp0 attached bpf: isp1 attached bpf: isp2 attached bpf: isp3 attached IPsec: Initialized Security Association Processing. IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <ST32122A/0.42> ATA-2 disk at ata0-master ad0: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1 ata1-master: success setting PIO3 on generic chip acd0: <MATSHITA CR-585/ZM50> CDROM drive at ata1 as master acd0: read 4125KB/s (32015KB/s), 128KB buffer, PIO3 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 4124735, size 4124673 : OK start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200307201958.h6KJwcS04480>