Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 06 Apr 2003 13:47:20 -0400
From:      Chuck Swiger <cswiger@mac.com>
To:        freebsd-isp@freebsd.org
Cc:        freebsd-stable@freebsd.org
Subject:   Re: load testing and tuning a 4GB RAM server
Message-ID:  <3E906828.8060001@mac.com>
In-Reply-To: <20030406120112.I11095-100000@netmint.com>
References:  <20030406120112.I11095-100000@netmint.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Support <support@netmint.com> wrote:
[ ... ]
> Now my question. I am trying to stress test a new Dell PowerEdge server
> and find the limits of its hardware and my tuning. Here are the server
> stats:
> 
> * 2x Xeon 2.8 with SMP compiled, hyperthreading NOT compiled in kernel
> * 4 GB of RAM, 8 GB of swap on Raid 1 (15K RPM drives) for speed
> * User Data is on Raid 5 in a detached PowerVault

Given your planned usage, and the type of hardware you've got, I'd like 
to redirect this thread to freebsd-isp as being more appropriate.

Also, your configuration is suited for where the users will be doing 
mostly reads and not a lot of writes.  If the users might be doing a lot 
of writes, you should use RAID-1,0 instead of RAID-5.

> Contents of /boot/loader.conf:
> 
> kern.ipc.maxsockets=32768
> kern.ipc.nmbclusters=32768
> kern.ipc.nmbufs=131072
> kern.ipc.nsfbufs=6656
> kern.ipc.shm_use_phys=1
> kern.maxfiles=32768
> kern.maxproc=8192
> kern.maxswzone=33554432
> kern.nbuf=16384
> kern.ncallout=32768
> kern.vm.kmem.size=268435456
> kern.vm.pmap.shpgperproc=2048
> net.inet.tcp.tcbhashsize=16384
 >
> Contents of /etc/sysctl.conf:
> 
> kern.ip.somaxconn=4096
> vm.v_free_min=131072
> vm.v_free_target=262144
> vm.f_free_reserved=32768
> vm.v_free_severe=65536
> kern.ps_showallprocs=0

Given the amount of memory you have, things like ipc.shm_use_phys and 
vfs.vmiodirenable are a good idea.  If this machine is primarily using 
the network for web traffic, see the section in "man tuning" about 
net.inet.tcp.sendspace and net.inet.tcp.recvspace in particular.

However, I wouldn't change the vm sysctl settings blindly-- the VM 
system in FreeBSD does a really good job of self-tuning.

> Some info from kernel config:
> 
> maxusers 0
> options KVA_PAGES=512
> options NSWAPDEV=1
> (the rest is pretty much my hardware, firewall and other irrelevant stuff)

However, possibly with a degree of self-contradictory advice :-), I'd 
set maxusers to a specific value like 256 or so.

The notion of tuning kernel variables to the amount of memory on the 
_build_ system-- which is not always the same as the system which will 
be running the kernel-- doesn't strike me as the right thing to do, so I 
tend to set this to 64 or so by default, and then change it on a 
case-by-case basis as the need arises.

Also, increase NSWAPDEV to at least two, so you at least have a 
possibility of adding more swap to a running system or for adding some 
in order to take down the primary swap area for some reason.

[ ... ]
> Any ideas? Comments? Is my tuning decent, or would you change anything
> else? This server is to be a very loaded web/database server.

How many simultaneous users do you expect?  WWW hits per day, or 
pageviews (if you can distinguish)?  Are you going to be using SSL, lots 
of virtual domains, any special apache modules?  Logfile analysis needs?

Also, what are you doing with the database; that is to say, which DB 
software are you going to use, and what is the DB to be used for?  Is 
the data sensitive or important?  If so, having a seperate DB server 
which is not Internet accessible but on a small local subnet (talking to 
a second NIC in the WWW server) would significantly improve the security 
aspects, and would also help balance site load in several regards.

Specificly, disk I/O contention is likely to happen if the DB is 
expected to see any significant usage while the drives are busy serving 
up user files.  That's aside from the fact that you really don't want to 
keep database files on RAID-5 storage in the first place, either-- keep 
the DB on RAID-1 or RAID-1,0 if you can: use some of that 15K swapspace 
if you need to.

-- 
-Chuck




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E906828.8060001>