From owner-freebsd-mobile Sun Jan 19 1: 4:47 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E447837B401 for ; Sun, 19 Jan 2003 01:04:46 -0800 (PST) Received: from socrates.Berkeley.EDU (socrates.Berkeley.EDU [128.32.25.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 769C443E4A for ; Sun, 19 Jan 2003 01:04:46 -0800 (PST) (envelope-from jmuelmen@socrates.Berkeley.EDU) Received: from socrates.Berkeley.EDU (localhost [127.0.0.1]) by socrates.Berkeley.EDU (8.11.3/8.11.3) with ESMTP id h0J94k924156 for ; Sun, 19 Jan 2003 01:04:46 -0800 (PST) Received: (from jmuelmen@localhost) by socrates.Berkeley.EDU (8.11.3/8.11.3) id h0J94jA24134; Sun, 19 Jan 2003 01:04:45 -0800 (PST) Message-Id: <200301190904.h0J94jA24134@socrates.Berkeley.EDU> To: "M. Warner Losh" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: problems with SMC 2632W in hostap mode From: Johannes Muelmenstaedt In-Reply-To: Your message of "Sat, 18 Jan 2003 23:46:40 MST." <20030118.234640.119919385.imp@bsdimp.com> Date: Sun, 19 Jan 2003 01:04:45 -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org No bridging anymore. I tried it with bridging first, and I had the same problem: the AP can hear the clients, but it can't talk to them. Cheers, Johannes >>>>> M Warner Losh writes: > No bridging? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 19 1:41:53 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 16ED037B401 for ; Sun, 19 Jan 2003 01:41:53 -0800 (PST) Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1B01F43F1E for ; Sun, 19 Jan 2003 01:41:52 -0800 (PST) (envelope-from imp@bsdimp.com) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.12.6/8.12.3) with ESMTP id h0J9fj1e063778; Sun, 19 Jan 2003 02:41:45 -0700 (MST) (envelope-from imp@bsdimp.com) Date: Sun, 19 Jan 2003 02:40:46 -0700 (MST) Message-Id: <20030119.024046.40389953.imp@bsdimp.com> To: jmuelmen@socrates.Berkeley.EDU Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: problems with SMC 2632W in hostap mode From: "M. Warner Losh" In-Reply-To: <200301190904.h0J94jA24134@socrates.Berkeley.EDU> References: <20030118.234640.119919385.imp@bsdimp.com> <200301190904.h0J94jA24134@socrates.Berkeley.EDU> X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In message: <200301190904.h0J94jA24134@socrates.Berkeley.EDU> Johannes Muelmenstaedt writes: : No bridging anymore. I tried it with bridging first, and I had : the same problem: the AP can hear the clients, but it can't talk : to them. It sounds like you are having the same problem. Who are you arping for? Is it 10.0.0.1? What do the other interfaces on that box look like? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 19 8:48:40 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9D63A37B401 for ; Sun, 19 Jan 2003 08:48:38 -0800 (PST) Received: from angelfish.lewiz.org (dialup.212-50-179-254.karoo.KCOM.COM [212.50.179.254]) by mx1.FreeBSD.org (Postfix) with SMTP id 60CE143ED8 for ; Sun, 19 Jan 2003 08:48:30 -0800 (PST) (envelope-from lewiz@lewiz.dyndns.org.lewiz.org) Received: (qmail 85287 invoked by uid 85); 19 Jan 2003 11:16:17 -0000 Received: from lewiz@lewiz.dyndns.org.lewiz.org by angelfish by uid 0 with qmail-scanner-1.14 (sophie: 2.10/3.62. spamassassin: 2.43. Clear:SA:0(-3.7/5.0):. Processed in 3.599969 secs); 19 Jan 2003 11:16:17 -0000 X-Spam-Status: No, hits=-3.7 required=5.0 Received: from lewiz.dyndns.org (HELO lewiz.dyndns.org.lewiz.org) (lewiz@192.168.0.4) by angelfish.lewiz.org with SMTP; 19 Jan 2003 11:16:10 -0000 Received: (nullmailer pid 85275 invoked by uid 1001); Sun, 19 Jan 2003 11:16:10 -0000 Date: Sun, 19 Jan 2003 11:16:10 +0000 From: lewiz To: David Spreen Cc: freebsd-mobile@freebsd.org Subject: Re: 5.0RC3 and PCCARD on Siemens Mobile 510 AGP Message-ID: <20030119111609.GA85237@lewiz.org> References: <87vg0pvrt5.fsf@foobar.toppoint.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="2fHTh5uZTiUOsy+g" Content-Disposition: inline In-Reply-To: <87vg0pvrt5.fsf@foobar.toppoint.de> X-GPG-Fingerprint: 90A4 939E 3847 A3E4 8103 2A48 22DA B428 542F ED3F X-GPG-Info: http://www.westwood.karoo.net/pgpkey / horowitz.surfnet.nl User-Agent: Mutt/1.5.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --2fHTh5uZTiUOsy+g Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Jan 16, 2003 at 01:53:10AM +0100, David Spreen wrote: > I just tried to install 5.0RC3 on my siemens mobile 510 AGP. Booting with Hehe, it might be better to wait for 5.0-RELEASE (check out your local FTP mirror :). > The card seemed to be detected correctly, so I could choose ep0 as install > device. >=20 > But when I did my switch still had not announced link for that card and= =20 > when I agreed to using dhcp for configuring the interface the installproc= ess > hung.=20 Yes. I have had _exactly_ the same problem with a 3Com 3C589D Etherlink III (also ep0). Everything that I do to the device causes a hard lockup (except running ifconfig ep0 media 10base2/BNC from a fixit console). > (Well, I changed the port, the cable and so on, but nothing worked). Yup, same here. What I've found is that once I got it installed it all worked perfectly (I was quite shocked, really). The only thing I can really suggest you do (other than wait for 5.1-RELEASE ;) is to see if you can either a) get somebody else to burn an ISO; or b) install 4.7-RELEASE and CVSup to 5.0-RELEASE. I know which I'd do, you could even purchase a CD from somewhere. > but I failed. I asked google and dejagoogle but got no help. I've I > still left out an option I am sorry for making noise on this list. Nope, definitely not noise. In fact, since it's not been fixed from DP2 it almost seems that it's something that was missed and it's probably my bad for not reporting it earlier (I had assumed it was a slightly damaged NIC). Hope that's been some help and best wishes, -lewiz. --=20 It's not enough to be Hungarian; you must have talent too. -- Alexander Korda ------------------------------------------------------------------------ --|| url: http://lewiz.info/ | http://www.westwood.karoo.net/pgpkey ||-- --2fHTh5uZTiUOsy+g Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE+Koj5Itq0KFQv7T8RAgCIAKDp9OyguQp+SbMwUMbWbX1xwbNmXwCeL9OA pHETzqEGjI5Gnu3aq/0/QKI= =pHPf -----END PGP SIGNATURE----- --2fHTh5uZTiUOsy+g-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 19 11: 9:15 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 83D7537B401 for ; Sun, 19 Jan 2003 11:09:12 -0800 (PST) Received: from socrates.Berkeley.EDU (socrates.Berkeley.EDU [128.32.25.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F0A543E4A for ; Sun, 19 Jan 2003 11:09:12 -0800 (PST) (envelope-from jmuelmen@socrates.Berkeley.EDU) Received: from socrates.Berkeley.EDU (localhost [127.0.0.1]) by socrates.Berkeley.EDU (8.11.3/8.11.3) with ESMTP id h0JJ9BU15765 for ; Sun, 19 Jan 2003 11:09:11 -0800 (PST) Received: (from jmuelmen@localhost) by socrates.Berkeley.EDU (8.11.3/8.11.3) id h0JJ9BA15746; Sun, 19 Jan 2003 11:09:11 -0800 (PST) Message-Id: <200301191909.h0JJ9BA15746@socrates.Berkeley.EDU> To: "M. Warner Losh" Cc: freebsd-mobile@FreeBSD.ORG From: Johannes Muelmenstaedt Subject: Re: problems with SMC 2632W in hostap mode In-Reply-To: Your message of "Sun, 19 Jan 2003 02:40:46 MST." <20030119.024046.40389953.imp@bsdimp.com> Date: Sun, 19 Jan 2003 11:09:11 -0800 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org To confuse things more, I've reverted to bridging, just to see if the problem might have gone away. (It didn't, of course.) Here's what the machine looks like now: - userland ppp is talking pppoe with a DSL modem over xl0 - wi0, rl0 and rl1 are all bridged together, and rl1 has IP number 10.0.0.1 xl0: flags=8843 mtu 1500 options=3 inet6 fe80::250:daff:fe5f:f9c2%xl0 prefixlen 64 scopeid 0x1 ether 00:50:da:5f:f9:c2 media: Ethernet autoselect (10baseT/UTP) status: active wi0: flags=8943 mtu 1500 inet6 fe80::204:e2ff:fe57:80f6%wi0 prefixlen 64 scopeid 0x2 ether 00:04:e2:57:80:f6 media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps ) status: associated ssid john_f_kennedy_international 1:john_f_kennedy_international stationname brb channel 11 authmode OPEN powersavemode OFF powersavesleep 100 wepmode OFF weptxkey 1 rl0: flags=8943 mtu 1500 inet6 fe80::205:5dff:fe45:f30e%rl0 prefixlen 64 scopeid 0x3 ether 00:05:5d:45:f3:0e media: Ethernet autoselect (100baseTX ) status: active rl1: flags=8943 mtu 1500 inet6 fe80::205:5dff:fe45:ffd0%rl1 prefixlen 64 scopeid 0x4 inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 ether 00:05:5d:45:ff:d0 media: Ethernet autoselect (100baseTX ) status: active lp0: flags=8810 mtu 1500 ppp0: flags=8010 mtu 1500 faith0: flags=8002 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 inet 127.0.0.1 netmask 0xff000000 tun0: flags=8051 mtu 1492 inet 66.32.185.224 --> 66.32.185.1 netmask 0xffffffff Opened by PID 55 Just in case I've got my bridging settings wrong: net.link.ether.bridge_cfg: wi0,rl0,rl1 net.link.ether.bridge: 1 net.link.ether.bridge_ipfw: 0 net.link.ether.bridge_ipf: 0 net.link.ether.bridge_ipfw_drop: 0 net.link.ether.bridge_ipfw_collisions: 0 I don't know if it's relevant, but here is what the kernel thinks about the NICs: Dec 22 00:51:42 brooklyn-bridge /kernel: xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1800-0x187f mem 0xf4009000-0xf400907f irq 11 at device 13.0 on pci0 Dec 22 00:51:42 brooklyn-bridge /kernel: xl0: Ethernet address: 00:50:da:5f:f9:c2 Dec 22 00:51:42 brooklyn-bridge /kernel: miibus0: on xl0 Dec 22 00:51:42 brooklyn-bridge /kernel: xlphy0: <3c905C 10/100 internal PHY> on miibus0 Dec 22 00:51:42 brooklyn-bridge /kernel: xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 22 00:51:42 brooklyn-bridge /kernel: wi0: port 0x1c00-0x1c3f,0x1880-0x18ff mem 0xf4008000-0xf4008fff irq 10 at device 14.0 on pci0 Dec 22 00:51:42 brooklyn-bridge /kernel: wi0: 802.11 address: 00:04:e2:57:80:f6 Dec 22 00:51:42 brooklyn-bridge /kernel: wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A Dec 22 00:51:42 brooklyn-bridge /kernel: wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03 Dec 22 00:51:42 brooklyn-bridge /kernel: rl0: port 0x1000-0x10ff mem 0xf4009400-0xf40094ff irq 15 at device 15.0 on pci0 Dec 22 00:51:42 brooklyn-bridge /kernel: rl0: Ethernet address: 00:05:5d:45:f3:0e Dec 22 00:51:42 brooklyn-bridge /kernel: miibus1: on rl0 Dec 22 00:51:42 brooklyn-bridge /kernel: rlphy0: on miibus1 Dec 22 00:51:42 brooklyn-bridge /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 22 00:51:42 brooklyn-bridge /kernel: rl1: port 0x1400-0x14ff mem 0xf4009800-0xf40098ff irq 9 at device 16.0 on pci0 Dec 22 00:51:42 brooklyn-bridge /kernel: rl1: Ethernet address: 00:05:5d:45:ff:d0 Dec 22 00:51:42 brooklyn-bridge /kernel: miibus2: on rl1 Dec 22 00:51:42 brooklyn-bridge /kernel: rlphy1: on miibus2 Dec 22 00:51:42 brooklyn-bridge /kernel: rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto D If I assign one of the clients 10.0.0.12 and try to ping 10.0.0.1 from the client, here's what tcpdump -i wi0 on the AP machine says: 11:00:53.542001 arp who-has 10.0.0.1 tell 10.0.0.12 11:00:53.542163 arp who-has 10.0.0.1 tell 10.0.0.12 11:00:53.542345 arp reply 10.0.0.1 is-at 0:4:e2:57:80:f6 11:00:54.534133 arp who-has 10.0.0.1 tell 10.0.0.12 11:00:54.534298 arp who-has 10.0.0.1 tell 10.0.0.12 11:00:54.534468 arp reply 10.0.0.1 is-at 0:4:e2:57:80:f6 ... But the client doesn't see any of the arp replies. Furthermore the client only sees one arp who-has per second, I'm puzzled why the AP sees two. The client works fine at work, so I don't think I have to suspect that it's the client that's at fault. Something else that confuses me is that if I run dhclient on one of the client machines and the dhcpd on the AP machine sends back a DHCPNAK, the client actually receives the DHCPNAK. It doesn't receive anything after that, though. Let me know what to try next. Thanks, Johannes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Jan 19 13:57:54 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9FDC737B401 for ; Sun, 19 Jan 2003 13:57:47 -0800 (PST) Received: from mailbox.univie.ac.at (mailbox.univie.ac.at [131.130.1.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2324C43E4A for ; Sun, 19 Jan 2003 13:57:46 -0800 (PST) (envelope-from l.ertl@univie.ac.at) Received: from adslle.cc.univie.ac.at (adslle.cc.univie.ac.at [131.130.102.11]) by mailbox.univie.ac.at (8.12.2/8.12.2) with ESMTP id h0JLvaX6038636 for ; Sun, 19 Jan 2003 22:57:40 +0100 Date: Sun, 19 Jan 2003 22:57:36 +0100 (CET) From: Lukas Ertl To: freebsd-mobile@freebsd.org Subject: 5.0 and Thinkpad T20: ACPI related panics Message-ID: <20030119223421.X363@leelou.in.tern> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE X-DCC-ZID-Univie-Metrics: mx1 4261; Body=1 Fuz1=1 Fuz2=1 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi there, today I upgraded my Thinkpad T20 from 4.7 to 5.0, just to see how it might run. The upgrade itself went smoothly, but I have big problems getting ACPI power management/suspend/resume to work. First off, apm worked quite good with 4.7; closing the lid, issueing "zzz" or hitting the suspend button put the laptop into sleep mode. Ok, now with 5.0, closing the lid seems to do nothing. If I open it again I either get some information messages about "resetting devices" and "wake up from sleep mode", but I'm sure the machine hasn't slept (suspend led wasn't on, but hard disk and fan were still running), or I get a kernel panic and after the crash dump the machine hits a deadlock or something (it doesn't do anything, like rebooting or so, it justs sits there and does nothing and I can only power-cycle it). If I press the suspend key (the blue Fn+F4), the display looks like it is melting away. Really. I've never seen something like this before: the screen is black (classic console), and if I suspend, it starts fading into yellow and bright white from the bottom slowly all over the screen. I was shocked when I first saw it. (If you're interested in how that looks I can take a picture or a short movie.) If I hit the Fn key again, the screen goes back to normal black, but I get again a kernel panic. ("zzz" doesn't do anything but giving an IOCTL error - as expected, since there's no apm in kernel and no apmd running. "apm" itself shows me the correct battery status, though.) Following is the dmesg and a backtrace of one of the panics (suspend and resume with Fn key). Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sun Jan 19 20:07:10 CET 2003 le@korben:/usr/src/sys/i386/compile/KORBEN Preloaded elf kernel "/boot/kernel/kernel" at 0xc053f000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc053f0a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc053f0f8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 696974546 Hz CPU: Intel Pentium III (696.97-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff real memory =3D 268369920 (255 MB) avail memory =3D 255029248 (243 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard Using $PIR table, 11 entries at 0xc00fdee0 ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: port 0x530-0x537 on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xf8000000-0xfbffffff at d evice 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) cbb0: mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fxp0: port 0x1800-0x183f mem 0xe8100000-0xe811 ffff,0xe8120000-0xe8120fff irq 11 at device 3.0 on pci0 fxp0: Ethernet address 00:02:b3:04:8d:3b inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at device 3.1 (no driver attached) csa0: mem 0xe8000000-0xe80fffff,0xe8122000- 0xe8122fff irq 11 at device 5.0 on pci0 csa: card is Thinkpad 600X/A20/T20 pcm0: on csa0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1850-0x185f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x1860-0x187f irq 11 at de vice 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 7.3 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: port 0x3f7,0x3f0-0 x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled acpi_ec0: port 0x66,0x62 on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled orm0: