Date: Wed, 18 Aug 2004 13:29:25 +0800 From: wu wei <logout.wuwei@gmail.com> To: freebsd-smp@freebsd.org Subject: have a smp with scsi problem Message-ID: <33f36d0a04081722296f65f3f4@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
i installed freebsd4.9 on my server. but if i open SMP on kernel . boot have an error " SCSI bus reset delivered,0 scbs aborted " scsi : Adaptec aic7892 Ultra160 i need help . thank u freebsd4.9# dmesg Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) III CPU - S 1266MHz (1262.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1048512K bytes) avail memory = 1039343616 (1014984K bytes) Preloaded elf kernel "kernel" at 0xc056b000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1800-0x183f mem 0xfb000000-0xfb0fffff,0xfb100000-0xfb100fff irq 10 at device 7.0 on pci0 fxp0: Ethernet address 00:c0:9f:17:f1:ff inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1840-0x187f mem 0xfb200000-0xfb2fffff,0xfb101000-0xfb101fff irq 7 at device 9.0 on pci0 fxp1: Ethernet address 00:c0:9f:17:f1:fe inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xfb102000-0xfb102fff irq 5 at device 11.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs pci0: <ATI Mach64-GR graphics accelerator> at 12.0 irq 11 isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x1880-0x188f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfb104000-0xfb104fff irq 9 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe3fff,0xe4000-0xe5fff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default acd0: CDROM <MATSHITA CR-177> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle pass1 at ahc0 bus 0 target 8 lun 0 pass1: <SDR GEM318 0> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS10K3_18_SCA 020W> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C) Mounting root from ufs:/dev/da0s1a freebsd4.9# mptable =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f7ab0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x2b mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0009fc70 signature: 'PCMP' base table length: 308 version: 1.4 checksum: 0xd9 OEM ID: 'Quanta ' Product ID: 'SU2 ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 30 local APIC address: 0xfee00000 extended table length: 140 extended table checksum: 103 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x11 BSP, usable 6 11 4 0x383fbff 0 0x11 AP, usable 6 11 4 0x383fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 3 0x11 usable 0xfec01000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-hi edge 2 0 2 0 INT active-hi edge 2 1 2 1 INT active-hi edge 2 2 2 2 INT active-hi edge 2 3 2 3 INT active-hi edge 2 4 2 4 INT active-lo level 2 5 2 5 INT active-hi edge 2 6 2 6 INT active-lo level 2 7 2 7 INT active-hi edge 2 8 2 8 INT active-lo level 2 9 2 9 INT active-lo level 2 10 2 10 INT active-lo level 2 11 2 11 INT active-hi edge 2 12 2 12 INT active-hi edge 2 13 2 13 INT active-hi edge 2 14 2 14 INT active-hi edge 2 15 2 15 INT active-lo level 0 7:A 3 4 INT active-lo level 0 9:A 3 5 INT active-lo level 0 11:A 3 8 INT active-lo level 0 12:A 3 9 INT active-lo level 0 15:A 2 9 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- System Address Space bus ID: 0 address type: memory address address base: 0x40000000 address range: 0xbee00000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfee01000 address range: 0x11ff000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd0000 address range: 0x10000 -- Bus Heirarchy bus ID: 2 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 -- Compatibility Bus Address bus ID: 1 address modifier: subtract predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 1 address modifier: subtract predefined range: 0x00000001 =============================================================================== freebsd4.9# pciconf chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00 chip1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00 fxp0@pci0:7:0: class=0x020000 card=0x8917152d chip=0x12298086 rev=0x08 hdr=0x00 fxp1@pci0:9:0: class=0x020000 card=0x8917152d chip=0x12298086 rev=0x08 hdr=0x00 ahc0@pci0:11:0: class=0x010000 card=0x8917152d chip=0x008f9005 rev=0x02 hdr=0x00 none0@pci0:12:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 hdr=0x00 isab0@pci0:15:0: class=0x060100 card=0x02001166 chip=0x02001166 rev=0x50 hdr=0x00 atapci0@pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166 rev=0x00 hdr=0x00 ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x04 hdr=0x00
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?33f36d0a04081722296f65f3f4>