Date: Sat, 5 Mar 2005 16:24:57 -0800 From: Eric Buchanan <freebsd@usol.com> To: freebsd-stable@freebsd.org Subject: Error with CMD 649 ATA100 controller while copying files over NFS on 4.11-Stable Message-ID: <200503051625.01980.freebsd@usol.com>
next in thread | raw e-mail | index | archive | help
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I switched one hard drive to a CMD 649 ATA100 controller last summer, and I=
've=20
had some trouble with it on 4.11-Stable. When I copy a large volume of file=
s=20
over NFS (800 Megabytes, lets say) the add on controller will stop=20
recognizing my hard drive. This time the files were not being copied off a=
=20
drive handled by this controller.=20
Any ideas? This only occurs when copying files over nfs, and it will happen=
=20
even when I am not copying anything involving the drive on the controller.=
=20
I've tried "atacontrol reinit 2" and it won't re-recognize the hard drive=20
(ad5s4f). I have absolutely zero problems when I am not using NFS,=20
especially zero problems with make worlds or building large ports on this=20
hard drive in question.
Thanks,
Eric Buchanan
Here is the dmesg I see after the hard drive is unrecognized by the ata=20
controller:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 4.11-STABLE #69: Mon Feb 14 15:38:38 PST 2005
idaho@paulus.org:/backup/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Celeron(TM) CPU 1400MHz (1396.79-MHz 686-class=
=20
CPU)
Origin =3D "GenuineIntel" Id =3D 0x6b4 Stepping =3D 4
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory =3D 436207616 (425984K bytes)
avail memory =3D 413069312 (403388K bytes)
Preloaded elf kernel "kernel" at 0xc0abe000.
Preloaded elf module "linux.ko" at 0xc0abe09c.
Preloaded elf module "nvidia.ko" at 0xc0abe13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff=
at=20
d
evice 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <RIVA TNT2 Model 64/Model 64 Pro> mem=20
0xfc000000-0xfdffffff,0xf5000000-
0xf5ffffff irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x18a0-0x18af at device 7.1 on=
=20
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1880-0x189f irq 9 a=
t=20
dev
ice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: U22_B003 iFeel Mouse, rev 1.10/98.03, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
chip0: <Intel 82371AB Power management controller> port 0x7000-0x700f at=20
device
7.3 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1800-0x187f mem=20
0xf4001000-0xf400
107f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:01:02:3e:6d:64
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <CMedia CMI8738> port 0x1000-0x10ff irq 10 at device 14.0 on pci0
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x1400-0x14ff mem=20
0xf4000000-0xf
4000fff irq 3 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs
atapci1: <CMD 649 ATA100 controller> port=20
0x18b0-0x18bf,0x18c0-0x18c3,0x18c8-0x1
8cf,0x18c4-0x18c7,0x18d0-0x18d7 irq 9 at device 16.0 on pci0
ata2: at 0x18d0 on atapci1
ata3: at 0x18c8 on atapci1
orm0: <Option ROMs> at iomem=20
0xc0000-0xcafff,0xcb000-0xcb7ff,0xcb800-0xcdfff,0xe
0000-0xe3fff,0xe4000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pca0 at port 0x40 on isa0
ahc0: Someone reset channel A
IP packet filtering initialized, divert enabled, rule-based forwarding=20
enabled,
default to deny, logging limited to 10000 packets/entry by default
ad0: 16479MB <Maxtor 91728D8> [33483/16/63] at ata0-master UDMA33
ad5: 57241MB <OEM60-54A 60GB 5400RPM> [116301/16/63] at ata2-slave UDMA100
acd0: CD-RW <_NEC CD-RW NR-9200A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE SX19171W 9D23> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing=20
Enabled
da0: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
ad5s4f: soft error (ECC corrected) reading fsbn 185641109 of 84275072-84275=
075=20
(
ad5s4 bn 185641109; cn 11555 tn 159 sn 17)ad5s4f: hard error reading fsbn=20
185641 109 of=
=20
84275072-84275075 (ad5s4 bn 185641109; cn 11555 tn 159 sn 17) trying PIO =
=20
mode
ad5: READ command timeout tag=3D0 serv=3D0 - resetting
ata2: resetting devices ..
ad5: removed from configuration
done
spec_getpages:(#ad/0x5002d) I/O read failure: (error=3D6) bp 0xca673d88 vp=
=20
0xd72e3 780
size: 0, resid: 0, a_count: 20480, valid: 0x0
nread: 0, reqpage: 0, pindex: 1, pcount: 5
vm_fault: pager read error, pid 786 (kdeinit)
spec_getpages:(#ad/0x5002d) I/O read failure: (error=3D6) bp 0xca673d88 vp=
=20
0xd72e3 780
size: 0, resid: 0, a_count: 883, valid: 0x0
nread: 0, reqpage: 0, pindex: 0, pcount: 1
vm_fault: pager read error, pid 788 (kdeinit)
spec_getpages:(#ad/0x5002d) I/O read failure: (error=3D6) bp 0xca673d88 vp=
=20
0xd72e3 780
size: 0, resid: 0, a_count: 883, valid: 0x0
nread: 0, reqpage: 0, pindex: 0, pcount: 1
vm_fault: pager read error, pid 788 (kdeinit)
pid 788 (kdeinit), uid 1000: exited on signal 11
paulus#
=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (FreeBSD)
iD8DBQFCKk3c//GaROrFlAkRAvI/AJ9l8kHMfYRpHzogr1mG+yoq6hKBOQCffmT6
aJL4RBNQCJITXSM8RC1FWgg=3D
=3DXo2M
=2D----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200503051625.01980.freebsd>