Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 12 Mar 2006 14:35:41 -0700
From:      "Freesbie" <freebsd@rmnanetworks.com>
To:        <freebsd-hardware@freebsd.org>
Subject:   dge-530T gigabit ethernet adapter
Message-ID:  <03b601c6461c$e9c813b0$076fa8c0@rmnalaptop>

next in thread | raw e-mail | index | archive | help
Hi,

I am using FreeBSD6.0(6.0-RELEASE FreeBSD 6.0-RELEASE #1). I just bought =
two dge-530T gigabyte ethernet cards and installed them in my computer. =
I have looked at the supported hardware for 6.0 and it said that the =
dge-530T is supported. I have sk compiled into my kernel, but on boot =
they are not recognized. Is there any additional steps I need to take? =
My kernel config file(PCI-Ethernet Portion) as well as pertaining =
snippet of dmesg are below. I don't know if it makes a difference but =
the H/W ver is:B1.

Thank you for your time in reading this message.

Freesbie

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these =
NICs!
device          miibus          # MII bus support
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, =
82558)
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet =
Networking
#device         pcn             # AMD Am79C97x PCI 10/100(precedence =
over 'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS =
7016
device          sk              # SysKonnect SK-984x & SK-982x gigabit =
Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit =
Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', =
``Cyclone'')

Dmesg Snippet
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> at device 9.0 (no driver attached)
pci1: <network, ethernet> at device 10.0 (no driver attached)
pci1: <simple comms> at device 11.0 (no driver attached)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?03b601c6461c$e9c813b0$076fa8c0>