From owner-freebsd-hardware@FreeBSD.ORG Sun Apr 16 10:53:18 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7C90D16A403 for ; Sun, 16 Apr 2006 10:53:18 +0000 (UTC) (envelope-from bachi@te-clan.ch) Received: from te-clan.ch (ns1.te-clan.ch [217.118.194.40]) by mx1.FreeBSD.org (Postfix) with SMTP id CACC443D49 for ; Sun, 16 Apr 2006 10:53:17 +0000 (GMT) (envelope-from bachi@te-clan.ch) Received: (qmail 4324 invoked from network); 16 Apr 2006 10:53:14 -0000 Received: from unknown (HELO ?10.0.0.251?) (80.219.57.164) by te-clan.ch with SMTP; 16 Apr 2006 10:53:14 -0000 From: Andreas Bachmann To: freebsd-hardware@freebsd.org Content-Type: text/plain Date: Sun, 16 Apr 2006 12:53:11 +0200 Message-Id: <1145184791.25345.10.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.2.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org Subject: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Apr 2006 10:53:18 -0000 Hi, Got some problem with my new notebook: Dell Inspiron 9400 After installing 6.0/6.1-BETA4/6.1-RC1 and starting dhclient or setting my IP address, my OS hangs. I load the GENERIC kernel http://bachi.te-clan.ch/freebsd/messages Any suggestions? Andreas From owner-freebsd-hardware@FreeBSD.ORG Sun Apr 16 19:27:09 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 195B716A416 for ; Sun, 16 Apr 2006 19:27:09 +0000 (UTC) (envelope-from bachi@te-clan.ch) Received: from te-clan.ch (ns1.te-clan.ch [217.118.194.40]) by mx1.FreeBSD.org (Postfix) with SMTP id 3FD3743D4C for ; Sun, 16 Apr 2006 19:27:07 +0000 (GMT) (envelope-from bachi@te-clan.ch) Received: (qmail 6823 invoked from network); 16 Apr 2006 19:27:04 -0000 Received: from unknown (HELO ?10.0.0.251?) (80.219.57.164) by te-clan.ch with SMTP; 16 Apr 2006 19:27:04 -0000 From: Andreas Bachmann To: freebsd-hardware@freebsd.org In-Reply-To: <1145184791.25345.10.camel@localhost> References: <1145184791.25345.10.camel@localhost> Content-Type: text/plain Date: Sun, 16 Apr 2006 21:27:01 +0200 Message-Id: <1145215621.25345.28.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.2.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Subject: Re: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Apr 2006 19:27:09 -0000 > After installing 6.0/6.1-BETA4/6.1-RC1 and starting dhclient or > setting my IP address, my OS hangs. I enable kernel debugging, set an IP address to the specific device (= Broadcom 440x), the system hangs and I step into the debugger. I really don't know much about drivers, but after stepping into the debugger, I don't get to the right process. I was in a keyboard-event function, probably because of CTRL+ALT+ESC. After stepping forward (= 'n') I reached the scheduler and after typing another 'n' my system hangs once again... Are there other persons, who also owns a Broadcom 440x NIC. Andreas From owner-freebsd-hardware@FreeBSD.ORG Sun Apr 16 19:29:52 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E2E016A416 for ; Sun, 16 Apr 2006 19:29:52 +0000 (UTC) (envelope-from dgerow@afflictions.org) Received: from mail.afflictions.org (asylum.afflictions.org [64.7.134.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id A760D43D4C for ; Sun, 16 Apr 2006 19:29:43 +0000 (GMT) (envelope-from dgerow@afflictions.org) Received: from localhost (localhost [127.0.0.1]) by mail.afflictions.org (Postfix) with ESMTP id 57DBC78CB9 for ; Sun, 16 Apr 2006 15:39:13 -0400 (EDT) Received: from mail.afflictions.org ([127.0.0.1]) by localhost (pandora.afflictions.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 25493-01 for ; Sun, 16 Apr 2006 15:39:03 -0400 (EDT) Received: from dementia.afflictions.org (dementia [172.19.206.56]) by mail.afflictions.org (Postfix) with ESMTP id 23E2578CCD for ; Sun, 16 Apr 2006 15:36:57 -0400 (EDT) Received: by dementia.afflictions.org (Postfix, from userid 1001) id DEF161C0866; Sun, 16 Apr 2006 10:01:36 -0400 (EDT) Date: Sun, 16 Apr 2006 10:01:36 -0400 From: Damian Gerow To: freebsd-hardware@freebsd.org Message-ID: <20060416140136.GE46601@afflictions.org> References: <200603251815.00814.agh@tpg.com.au> <20060326082943.GA828@zaphod.nitro.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-PGP-Fingerprint: B3D7 D901 A53A 1A99 BFD6 E6DF 9F3B 742B C288 9CC9 X-PGP-Key: 0xC2889CC9 User-Agent: Mutt/1.5.11 X-Virus-Scanned: amavisd-new at pandora.afflictions.org Subject: Re: Plextor 716SA DVD X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Apr 2006 19:29:52 -0000 Thus spake Jamie Bowden (ragnar@sysabend.org) [14/04/06 09:47]: : Seems fine from here tracking RELELNG_6: Then something has changed since March 26: % uname -a FreeBSD dementia.afflictions.org 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Sun Mar 26 09:54:58 EST 2006 root@dementia.afflictions.org:/usr/obj/usr/src/sys/dementia amd64 % dmesg | grep acd acd0: DVDROM at ata0-slave UDMA66 % Which is excellent news! From owner-freebsd-hardware@FreeBSD.ORG Sun Apr 16 19:57:41 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 29DC416A419 for ; Sun, 16 Apr 2006 19:57:41 +0000 (UTC) (envelope-from bachi@te-clan.ch) Received: from te-clan.ch (ns1.te-clan.ch [217.118.194.40]) by mx1.FreeBSD.org (Postfix) with SMTP id 1D4C243D48 for ; Sun, 16 Apr 2006 19:57:39 +0000 (GMT) (envelope-from bachi@te-clan.ch) Received: (qmail 7466 invoked from network); 16 Apr 2006 19:57:37 -0000 Received: from unknown (HELO ?10.0.0.251?) (80.219.57.164) by te-clan.ch with SMTP; 16 Apr 2006 19:57:37 -0000 From: Andreas Bachmann To: Mikko =?ISO-8859-1?Q?Ty=F6l=E4j=E4rvi?= In-Reply-To: <20060416120208.D4092@antec.home> References: <1145184791.25345.10.camel@localhost> <20060416120208.D4092@antec.home> Content-Type: text/plain Date: Sun, 16 Apr 2006 21:57:34 +0200 Message-Id: <1145217454.25345.36.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.2.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Apr 2006 19:57:41 -0000 > The bfe driver is broken for RAM sizes above 1G, and you have 2G. > > For kicks, you could try booting with hw.physmem="1G" (in loader.conf > or manually). If that doesn't work, you have discovered a new bug. > > The ndis driver works on my H^HDell notebook (see ndisgen(8)). I found your post to freebsd-mobile with the same text :-) After limiting my physical memory, my NIC works now... I will look at the ndisgen. thanks a lot Andreas From owner-freebsd-hardware@FreeBSD.ORG Mon Apr 17 05:18:22 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D4E7316A401 for ; Mon, 17 Apr 2006 05:18:21 +0000 (UTC) (envelope-from hartleigh@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id F39C443D49 for ; Mon, 17 Apr 2006 05:18:20 +0000 (GMT) (envelope-from hartleigh@gmail.com) Received: by nz-out-0102.google.com with SMTP id l8so456740nzf for ; Sun, 16 Apr 2006 22:18:20 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:from:to:subject:date:mime-version:content-type:x-mailer:x-mimeole:thread-index:message-id; b=PXAyqYVjXJBPdktoGS3Ed3KkTq/bxiQqjxzzG1Rf+bwg5+ZCl0NnMEr1G/k7NV4pW8b3vnlDCus7pSl9la7Nd4bDAn8p629BHW9TkunK5YyQIbabMatTTAN5d2fhzIWryCM6AuSYBV11dTr++zz9gfnhzROT910fxbsOZMSKXDE= Received: by 10.37.15.67 with SMTP id s67mr176440nzi; Sun, 16 Apr 2006 22:18:20 -0700 (PDT) Received: from HARTLEIGH ( [203.206.78.234]) by mx.gmail.com with ESMTP id 15sm112772nzp.2006.04.16.22.18.18; Sun, 16 Apr 2006 22:18:20 -0700 (PDT) From: "Hartleigh Burton" To: Date: Mon, 17 Apr 2006 15:18:17 +1000 MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook, Build 11.0.5510 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcZh3lVcJ7AafUPnQ9K+EIMz7gw5zw== Message-ID: <4443251c.461f965d.60e1.59e0@mx.gmail.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Promise FastTrack S150 SX4-M vs FreeBSD & God X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 05:18:22 -0000 Hi All, So I have searched and searched, read through these lists, seen everyone's problems with this controller. And although I am completely aware that this controller is not officially supported, has anybody successfully managed to get it to work with FreeBSD 6.0 (or any release) with a raid 5 array? I really do not want to go back to linux to solve this dilemma *sad*. I have found love with the FreeBSD package system & simplicity. Regards, Hartleigh. From owner-freebsd-hardware@FreeBSD.ORG Mon Apr 17 08:20:27 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B638E16A405 for ; Mon, 17 Apr 2006 08:20:27 +0000 (UTC) (envelope-from agh@tpg.com.au) Received: from mail4.tpgi.com.au (mail4.tpgi.com.au [203.12.160.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 94C8743D60 for ; Mon, 17 Apr 2006 08:20:20 +0000 (GMT) (envelope-from agh@tpg.com.au) X-TPG-Antivirus: Passed Received: from localhost.madcat (220-244-72-6.static.tpgi.com.au [220.244.72.6]) by mail4.tpgi.com.au (envelope-from agh@tpg.com.au) (8.13.6/8.13.6) with ESMTP id k3H8K7df029092 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 17 Apr 2006 18:20:09 +1000 From: "Alastair G. Hogge" To: freebsd-hardware@freebsd.org Date: Mon, 17 Apr 2006 17:44:55 +1000 User-Agent: KMail/1.9.1 References: <200603251815.00814.agh@tpg.com.au> <20060416140136.GE46601@afflictions.org> In-Reply-To: <20060416140136.GE46601@afflictions.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200604171744.55606.agh@tpg.com.au> Cc: Damian Gerow Subject: Re: Plextor 716SA DVD X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 08:20:27 -0000 On Monday 17 April 2006 00:01, Damian Gerow wrote: > Thus spake Jamie Bowden (ragnar@sysabend.org) [14/04/06 09:47]: > : Seems fine from here tracking RELELNG_6: > > Then something has changed since March 26: > > % uname -a > FreeBSD dementia.afflictions.org 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE > #0: Sun Mar 26 09:54:58 EST 2006 uname -a FreeBSD madcat 6.1-RC FreeBSD 6.1-RC #14: Sun Apr 16 01:09:06 CST 2006 root@madcat:/usr/obj/usr/src/sys/MADCAT amd64 > root@dementia.afflictions.org:/usr/obj/usr/src/sys/dementia amd64 % dmesg > | grep acd > acd0: DVDROM at ata0-slave > UDMA66 % dmesg | grep cd acd0: CDRW at ata0-master PIO4 cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers Still no PX-716SA > Which is excellent news! I'm begining to think my hardware is stuffed. It shows up in the BIOS and I can boot from it, plus I only bought it with in a couple of months ago. From owner-freebsd-hardware@FreeBSD.ORG Mon Apr 17 11:14:25 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F9D416A402; Mon, 17 Apr 2006 11:14:25 +0000 (UTC) (envelope-from n-shigemura@ensure.jp) Received: from smail.ensure.ne.jp (smail.ensure.ne.jp [218.219.76.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id 947AF43D46; Mon, 17 Apr 2006 11:14:24 +0000 (GMT) (envelope-from n-shigemura@ensure.jp) Received: from scaned ([127.0.0.1] helo=smail.ensure.ne.jp) by smail.ensure.ne.jp with esmtp (Mail 4.41) id 1FVRgV-0002Us-6r; Mon, 17 Apr 2006 20:14:23 +0900 Received: from [211.18.249.19] (helo=[192.168.214.254]) by smail.ensure.ne.jp with asmtp (Mail 4.41) id 1FVRgU-0002Ul-WE; Mon, 17 Apr 2006 20:14:23 +0900 Date: Mon, 17 Apr 2006 20:14:52 +0900 From: Norikatsu Shigemura To: Vinod Kashyap Message-Id: <20060417201418.0D57.N-SHIGEMURA@ensure.jp> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Becky! ver. 2.21.02 [ja] X-ES-VirusCheck: 19a0adc6dfa3baef1868611db7b5f976 Cc: "Ensure Technology Ltd. Technical Support" , Norikatsu Shigemura , freebsd-hardware@freebsd.org Subject: 3ware 9500S-8 hardware failure X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 11:14:25 -0000 Hi Vinod. I'll use 3ware RAID card (9500S-8) with 6 SATA HDDs as RAID5(5HDDs) + HotSwap(1HDD) on 6.0-RELEASE or 6.1-RELEASE (I tested 6.1BETA4). I was installing 6.1BETA4 from CD-ROM, but I contacted a hardware failure (6.0-RELEASE, too) like following message. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - twa0: ace card: (0x6c706572: 0x1303): PCI parity error: clearing... Re-seat/move/replace card: status reg = 0x15806a56 [MC_RDY,RESP_Q_EMPTY,PCI_PERR] twa0: ERROR: (0x16: 0x1302): Unexpected status bit(s): status reg = 0x800000 Unexpected bits: [PCI_PERR] : twa0: ERROR: (0x03: 0x0212): PCI parity error: port=1 (da0:twa0:0:0:0): WRITE(10). CDB: 2a 0 4 7d fc 3f 0 0 80 0 (da0:twa0:0:0:0): CAM Status: SCSI Status Error (da0:twa0:0:0:0): SCSI Status: Check Condition (da0:twa0:0:0:0): HARDWARE FAILURE asc:4b,0 (da0:twa0:0:0:0): Data phase error (da0:twa0:0:0:0): Retrying Command (per Sense Data) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Freezed after this message was printed. I rebooted it, and boot 3ware BIOS. I saw following BIOS screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3ware BIOS manager (slot 7 ) Exportable Units: Unit 0 - 5 drive 64K RAID 5 1.45TB REBUILDING (after F8) Port 1 - ST3400832AS 372.61 GB Port 2 - ST3400832AS 372.61 GB Port 3 - ST3400832AS 372.61 GB Port 4 - ST3400832AS 372.61 GB Port 5 - ST3400832AS 372.61 GB Not in Use Unusable Arrays: Unit 1 - 5 drive 64K RAID 5 1.45TB Missing drives Port 0 - ST3400832AS 372.61 GB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - After this, I saw following message on 6.4BETA4. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3ware device driver for 9000 series storage controllers, version: 3.60.02.012 twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem 0xfb260000-0xfb2600ff,0xfd800000-0xfdffffff irq 52 at device 2.0 on pci2 twa0: [GIANT-LOCKED] twa0: WARNING: (0x04: 0x0008): Unclean shutdown detected: unit=0 twa0: WARNING: (0x04: 0x0006): Incomplete unit detected: unit=1 twa0: INFO: (0x16: 0x1300): Controller details:: Model 9500S-8, 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - I think that 3ware RAID card is hardware failure. Should I change RAID card? -- Norikatsu Shigemura Norikatsu Shigemura From owner-freebsd-hardware@FreeBSD.ORG Mon Apr 17 17:57:58 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9601216A401 for ; Mon, 17 Apr 2006 17:57:58 +0000 (UTC) (envelope-from dgerow@afflictions.org) Received: from mail.afflictions.org (asylum.afflictions.org [64.7.134.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id DB68343D58 for ; Mon, 17 Apr 2006 17:57:55 +0000 (GMT) (envelope-from dgerow@afflictions.org) Received: from localhost (localhost [127.0.0.1]) by mail.afflictions.org (Postfix) with ESMTP id 6326978CA6; Mon, 17 Apr 2006 14:07:27 -0400 (EDT) Received: from mail.afflictions.org ([127.0.0.1]) by localhost (pandora.afflictions.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 17381-06; Mon, 17 Apr 2006 14:07:25 -0400 (EDT) Received: from dementia.afflictions.org (dementia [172.19.206.56]) by mail.afflictions.org (Postfix) with ESMTP id 5AA4478CB8; Mon, 17 Apr 2006 14:07:21 -0400 (EDT) Received: by dementia.afflictions.org (Postfix, from userid 1001) id 299C11C080F; Mon, 17 Apr 2006 13:57:36 -0400 (EDT) Date: Mon, 17 Apr 2006 13:57:36 -0400 From: Damian Gerow To: "Alastair G. Hogge" Message-ID: <20060417175735.GA89150@afflictions.org> References: <200603251815.00814.agh@tpg.com.au> <20060416140136.GE46601@afflictions.org> <200604171744.55606.agh@tpg.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200604171744.55606.agh@tpg.com.au> X-PGP-Fingerprint: B3D7 D901 A53A 1A99 BFD6 E6DF 9F3B 742B C288 9CC9 X-PGP-Key: 0xC2889CC9 User-Agent: Mutt/1.5.11 X-Virus-Scanned: amavisd-new at pandora.afflictions.org Cc: freebsd-hardware@freebsd.org Subject: Re: Plextor 716SA DVD X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 17:57:58 -0000 Thus spake Alastair G. Hogge (agh@tpg.com.au) [17/04/06 04:38]: : > root@dementia.afflictions.org:/usr/obj/usr/src/sys/dementia amd64 % dmesg : > | grep acd : > acd0: DVDROM at ata0-slave : > UDMA66 % : dmesg | grep cd : acd0: CDRW at ata0-master PIO4 : cd0 at ata0 bus 0 target 0 lun 0 : cd0: Removable CD-ROM SCSI-0 device : cd0: 16.000MB/s transfers : : Still no PX-716SA Same here. I updated yesterday, hoping to get it working, but (unsurprisingly), it's still not showing up. : I'm begining to think my hardware is stuffed. It shows up in the BIOS and I : can boot from it, plus I only bought it with in a couple of months ago. I wouldn't jump to conclusions just yet. I don't think Soren has merged the SATA burner code in to the tree: It makes sense that it would be in the BIOS, and that you can boot from it. But if the FreeBSD kernel doesn't know about SATA CD-ROM drives, it won't find it. From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 08:43:35 2006 Return-Path: X-Original-To: freebsd-hardware@FreeBSD.ORG Delivered-To: freebsd-hardware@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5912C16A406 for ; Tue, 18 Apr 2006 08:43:35 +0000 (UTC) (envelope-from olli@lurza.secnetix.de) Received: from lurza.secnetix.de (lurza.secnetix.de [83.120.8.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id A090443D73 for ; Tue, 18 Apr 2006 08:43:25 +0000 (GMT) (envelope-from olli@lurza.secnetix.de) Received: from lurza.secnetix.de (idqfmh@localhost [127.0.0.1]) by lurza.secnetix.de (8.13.4/8.13.4) with ESMTP id k3I8hIKN049637 for ; Tue, 18 Apr 2006 10:43:23 +0200 (CEST) (envelope-from oliver.fromme@secnetix.de) Received: (from olli@localhost) by lurza.secnetix.de (8.13.4/8.13.1/Submit) id k3I8hI6E049636; Tue, 18 Apr 2006 10:43:18 +0200 (CEST) (envelope-from olli) Date: Tue, 18 Apr 2006 10:43:18 +0200 (CEST) Message-Id: <200604180843.k3I8hI6E049636@lurza.secnetix.de> From: Oliver Fromme To: freebsd-hardware@FreeBSD.ORG In-Reply-To: <20060415153418.M52372@bmyster.com> X-Newsgroups: list.freebsd-hardware User-Agent: tin/1.8.0-20051224 ("Ronay") (UNIX) (FreeBSD/4.11-STABLE (i386)) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.1.2 (lurza.secnetix.de [127.0.0.1]); Tue, 18 Apr 2006 10:43:23 +0200 (CEST) Cc: Subject: Re: IDE tape drive stt3401a X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-hardware@FreeBSD.ORG List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 08:43:35 -0000 Carl Foote wrote: > I just converted a windows server over to Freebsd 5.4 stable. The stt3401a > tape drive that was in server was working fine. The tape drive posts in the > BIOS but when freebsd boots up, it will not detect the drive. You haven't removed the ast(4) driver from your kernel, have you? > Documentation > for the drive does state it cannot be on the same controller as a hard drive, > which I verified. It can be on the same controller, but not on the same channel. As far as I know, it works when configured as slave device (even though this isn't really a legal ATA configuration): atapci0: port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 9 at device 31.1 on pci0 ata1: at 0x170 irq 15 on atapci0 ast0: TAPE at ata1-slave PIO3 > So, on its own controller (secondary) as master Try to configure it as slave device. > I know freebsd is doing /dev differently than in the past. It loads /dev > dynamically on boot, so it is not loaded with all the device files, just the > ones it detects. Is there a way to force the dev file to load. There is no way, and it wouldn't be useful anyway. If no driver attaches to the device, a device node in /dev wouldn't buy you anything. > ANY suggestions would be appreciated. You're not giving much information ... It would be helpful to know what kind of controller you have. An appropriate excerpt from a verbose boot might contain useful information (/var/run/dmesg.boot). Best regards Oliver -- Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing Dienstleistungen mit Schwerpunkt FreeBSD: http://www.secnetix.de/bsd Any opinions expressed in this message may be personal to the author and may not necessarily reflect the opinions of secnetix in any way. "I started using PostgreSQL around a month ago, and the feeling is similar to the switch from Linux to FreeBSD in '96 -- 'wow!'." -- Oddbjorn Steffensen From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 11:27:21 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7BF3216A401 for ; Tue, 18 Apr 2006 11:27:21 +0000 (UTC) (envelope-from hartleigh@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.231]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4197243D79 for ; Tue, 18 Apr 2006 11:27:06 +0000 (GMT) (envelope-from hartleigh@gmail.com) Received: by wproxy.gmail.com with SMTP id i12so798282wra for ; Tue, 18 Apr 2006 04:27:05 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:from:to:subject:date:mime-version:content-type:x-mailer:thread-index:x-mimeole:message-id; b=WDQ0/MvSMz62WqvytBJTtc6jy+UR5XKpog55OWL20BjAqAL+3tpH4ZksS1WN7O7Iyz8y73+Y32yE0XujG+Khm+4IG/SBMS+V/iO8bBv8dI7YTI9QN76hZE2HaDgODaAxQQzpA18bCVOR+3UK+OULpXXjLvDFEU9elEIOHki6mx8= Received: by 10.54.91.3 with SMTP id o3mr370673wrb; Tue, 18 Apr 2006 04:27:05 -0700 (PDT) Received: from HARTLEIGH ( [203.206.78.234]) by mx.gmail.com with ESMTP id 26sm1292856wra.2006.04.18.04.27.04; Tue, 18 Apr 2006 04:27:05 -0700 (PDT) From: "Hartleigh Burton" To: Date: Tue, 18 Apr 2006 21:27:01 +1000 MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook, Build 11.0.5510 Thread-Index: AcZi2wMGxvbk7tbYTO2u0hoBrElRtg== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Message-ID: <4444cd09.759f009c.1b8d.ffff9b38@mx.gmail.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Promise FastTrack S150 SX4-M vs FreeBSD & God X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 11:27:21 -0000 Hi All, So I have searched and searched, read through these lists, seen everyone's problems with this controller in FreeBSD. And although I am completely aware that this controller is not officially supported, has anybody successfully managed to get it to work with FreeBSD 6.0 (or any release) with a raid 5 array? I really do not want to go back to linux to solve this dilemma *sad*. I have found love with the FreeBSD package system & simplicity. Regards, Hartleigh. From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 18:41:46 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 40A7516A401; Tue, 18 Apr 2006 18:41:46 +0000 (UTC) (envelope-from vkashyap@amcc.com) Received: from sdcexchange01.amcc.com (sdcfw11.amcc.com [198.137.200.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB45D43D46; Tue, 18 Apr 2006 18:41:45 +0000 (GMT) (envelope-from vkashyap@amcc.com) X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.3790.1830 Importance: normal Priority: normal Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Date: Tue, 18 Apr 2006 11:41:42 -0700 Message-ID: <2B3B2AA816369A4E87D7BE63EC9D2F26018875CE@SDCEXCHANGE01.ad.amcc.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: 3ware 9500S-8 hardware failure thread-index: AcZipvUcOSbs8AI5RZi34pI8KRK/eQAcFY8w From: "Vinod Kashyap" To: "Norikatsu Shigemura" Cc: "Ensure Technology Ltd. Technical Support" , Norikatsu Shigemura , freebsd-hardware@freebsd.org Subject: RE: 3ware 9500S-8 hardware failure X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 18:41:46 -0000 > -----Original Message----- > From: Norikatsu Shigemura [mailto:n-shigemura@ensure.jp]=20 > Sent: Monday, April 17, 2006 4:15 AM > To: Vinod Kashyap > Cc: freebsd-hardware@freebsd.org; Ensure Technology Ltd.=20 > Technical Support; Norikatsu Shigemura > Subject: 3ware 9500S-8 hardware failure >=20 > Hi Vinod. >=20 > I'll use 3ware RAID card (9500S-8) with 6 SATA HDDs as=20 > RAID5(5HDDs) > + HotSwap(1HDD) on 6.0-RELEASE or 6.1-RELEASE (I tested=20 > 6.1BETA4). >=20 > I was installing 6.1BETA4 from CD-ROM, but I contacted=20 > a hardware > failure (6.0-RELEASE, too) like following message. >=20 > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - > twa0: ace card: (0x6c706572: 0x1303): PCI parity error:=20 > clearing... Re-seat/move/replace card: status reg =3D=20 > 0x15806a56 [MC_RDY,RESP_Q_EMPTY,PCI_PERR] > twa0: ERROR: (0x16: 0x1302): Unexpected status bit(s): status=20 > reg =3D 0x800000 Unexpected bits: [PCI_PERR] > : Like the error message says, re-seating the card, or moving it to a different PCI slot might help. If that doesn't work, it might have to be replaced. Contact 3ware Support and they will be able to help you. > twa0: ERROR: (0x03: 0x0212): PCI parity error: port=3D1 > (da0:twa0:0:0:0): WRITE(10). CDB: 2a 0 4 7d fc 3f 0 0 80 0 > (da0:twa0:0:0:0): CAM Status: SCSI Status Error > (da0:twa0:0:0:0): SCSI Status: Check Condition > (da0:twa0:0:0:0): HARDWARE FAILURE asc:4b,0 > (da0:twa0:0:0:0): Data phase error > (da0:twa0:0:0:0): Retrying Command (per Sense Data) > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - > Freezed after this message was printed. >=20 >=20 > I rebooted it, and boot 3ware BIOS. I saw following=20 > BIOS screen. > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - > 3ware BIOS manager (slot 7 ) >=20 > Exportable Units: > Unit 0 - 5 drive 64K RAID 5 1.45TB REBUILDING (after F8) > Port 1 - ST3400832AS 372.61 GB > Port 2 - ST3400832AS 372.61 GB > Port 3 - ST3400832AS 372.61 GB > Port 4 - ST3400832AS 372.61 GB > Port 5 - ST3400832AS 372.61 GB Not in Use >=20 > Unusable Arrays: > Unit 1 - 5 drive 64K RAID 5 1.45TB Missing drives > Port 0 - ST3400832AS 372.61 GB > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - >=20 >=20 > After this, I saw following message on 6.4BETA4. > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - 3ware device driver for 9000 series storage=20 > controllers, version: 3.60.02.012 > twa0: <3ware 9000 series Storage Controller> port=20 > 0x3000-0x30ff mem 0xfb260000-0xfb2600ff,0xfd800000-0xfdffffff=20 > irq 52 at device 2.0 on pci2 > twa0: [GIANT-LOCKED] > twa0: WARNING: (0x04: 0x0008): Unclean shutdown detected: unit=3D0 > twa0: WARNING: (0x04: 0x0006): Incomplete unit detected: unit=3D1 > twa0: INFO: (0x16: 0x1300): Controller details:: Model=20 > 9500S-8, 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -=20 > - - - - - - >=20 > I think that 3ware RAID card is hardware failure. Should I > change RAID card? >=20 > -- > Norikatsu Shigemura Norikatsu=20 > Shigemura >=20 > -------------------------------------------------------- CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, = is for the sole use of the intended recipient(s) and contains = information that is confidential and proprietary to Applied Micro = Circuits Corporation or its subsidiaries. It is to be used solely for = the purpose of furthering the parties' business relationship. All = unauthorized review, use, disclosure or distribution is prohibited. If = you are not the intended recipient, please contact the sender by reply = e-mail and destroy all copies of the original message. From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 20:07:13 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 712EE16A407 for ; Tue, 18 Apr 2006 20:07:13 +0000 (UTC) (envelope-from mistry.7@osu.edu) Received: from mail.united-ware.com (am-productions.biz [69.61.164.22]) by mx1.FreeBSD.org (Postfix) with ESMTP id A44CE43D45 for ; Tue, 18 Apr 2006 20:07:12 +0000 (GMT) (envelope-from mistry.7@osu.edu) Received: from [192.168.1.100] (am-productions.biz [69.61.164.22]) (authenticated bits=0) by mail.united-ware.com (8.13.4/8.13.4) with ESMTP id k3IKNiF7049884 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Tue, 18 Apr 2006 16:23:50 -0400 (EDT) (envelope-from mistry.7@osu.edu) From: Anish Mistry To: freebsd-hardware@freebsd.org Date: Tue, 18 Apr 2006 16:07:12 -0400 User-Agent: KMail/1.9.1 References: <20060415153418.M52372@bmyster.com> In-Reply-To: <20060415153418.M52372@bmyster.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1994081.3mpXZrLSf7"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200604181607.20430.mistry.7@osu.edu> X-Spam-Status: No, score=-5.5 required=5.0 tests=ALL_TRUSTED,BAYES_50, MYFREEBSD2 autolearn=failed version=3.1.0 X-Spam-Checker-Version: SpamAssassin 3.1.0 (2005-09-13) on mail.united-ware.com X-Virus-Scanned: ClamAV 0.88.1/1405/Tue Apr 18 14:30:25 2006 on mail.united-ware.com X-Virus-Status: Clean Cc: Carl Foote Subject: Re: IDE tape drive stt3401a X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 20:07:13 -0000 --nextPart1994081.3mpXZrLSf7 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Saturday 15 April 2006 11:42, Carl Foote wrote: > I just converted a windows server over to Freebsd 5.4 stable. The > stt3401a tape drive that was in server was working fine. The tape > drive posts in the BIOS but when freebsd boots up, it will not > detect the drive. Documentation for the drive does state it cannot > be on the same controller as a hard drive, which I verified. So, > on its own controller (secondary) as master, the OS still will not > detect the drive when system boots. I have tried all possibilities > of appropiate jumper settings to no avail. The best I can get out > of the drive is when the OS loads I get a "ata1-slave: FAILURE - > ATAPI_IDENTIFY timed out". I get the message three times the os > loads and no drive. > > I know freebsd is doing /dev differently than in the past. It > loads /dev dynamically on boot, so it is not loaded with all the > device files, just the ones it detects. Is there a way to force > the dev file to load. > > ANY suggestions would be appreciated. This won't help you, but I was in a similar situation when I upgraded=20 from 5.3 to 5.4. My ast tape drive disappeared. Unfortunately I=20 couldn't spend the time to debug the problem so just downgraded to=20 5.3 and it appeared again. =2D-=20 Anish Mistry --nextPart1994081.3mpXZrLSf7 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBERUb4xqA5ziudZT0RAkIpAJ0ciFlf281EaIc3VJespiVxz1h7PgCfcDa+ ZCsf25aZwUVBInpVZ5IVfCE= =9IxE -----END PGP SIGNATURE----- --nextPart1994081.3mpXZrLSf7-- From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 21:04:44 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9E03D16A415 for ; Tue, 18 Apr 2006 21:04:44 +0000 (UTC) (envelope-from adyas@numbersix.net) Received: from mail11.bluewin.ch (mail11.bluewin.ch [195.186.18.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2CC5043D48 for ; Tue, 18 Apr 2006 21:04:41 +0000 (GMT) (envelope-from adyas@numbersix.net) Received: from [192.168.0.2] (83.76.101.190) by mail11.bluewin.ch (Bluewin 7.2.072.1) id 443100090038631B for freebsd-hardware@freebsd.org; Tue, 18 Apr 2006 21:04:40 +0000 Date: Tue, 18 Apr 2006 23:04:46 +0200 (CEST) From: Alex Dyas X-X-Sender: adyas@bertha To: freebsd-hardware@freebsd.org Message-ID: <20060418222644.B18394@bertha> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: FreeBSD on Dell 2850 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 21:04:44 -0000 Hi, I'm looking for a rackmount server to run FreeBSD on. I know Dell reasonably well (though mostly with Linux), and the 2850 seems to fit what I'm looking for. However I'm concerned about support for the PERC4e/Di RAID controller, ie monitoring the state of. There was some talk of support through LSI's own drivers (the link escapes me for the minute), but this was for FBSD 5.n. Does anyone have any up to date experience / info? Alternatively, suggestions for other similar FreeBSD friendly hardware that is easily available in Switzerland would also be useful. Thanks, Alex. From owner-freebsd-hardware@FreeBSD.ORG Tue Apr 18 22:02:59 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E75616A403 for ; Tue, 18 Apr 2006 22:02:59 +0000 (UTC) (envelope-from xfb52@dial.pipex.com) Received: from smtp-out4.blueyonder.co.uk (smtp-out4.blueyonder.co.uk [195.188.213.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9F89143D45 for ; Tue, 18 Apr 2006 22:02:58 +0000 (GMT) (envelope-from xfb52@dial.pipex.com) Received: from [172.23.170.136] (helo=anti-virus01-07) by smtp-out4.blueyonder.co.uk with smtp (Exim 4.52) id 1FVyHh-0003TY-4o; Tue, 18 Apr 2006 23:02:57 +0100 Received: from [80.192.25.195] (helo=[192.168.0.2]) by asmtp-out2.blueyonder.co.uk with esmtp (Exim 4.52) id 1FVyHg-0005oG-Hk; Tue, 18 Apr 2006 23:02:56 +0100 Message-ID: <44456210.4010903@dial.pipex.com> Date: Tue, 18 Apr 2006 23:02:56 +0100 From: Alex Zbyslaw User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-GB; rv:1.7.12) Gecko/20060305 X-Accept-Language: en MIME-Version: 1.0 To: Alex Dyas References: <20060418222644.B18394@bertha> In-Reply-To: <20060418222644.B18394@bertha> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-hardware@freebsd.org Subject: Re: FreeBSD on Dell 2850 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Apr 2006 22:02:59 -0000 Alex Dyas wrote: > I'm looking for a rackmount server to run FreeBSD on. I know Dell > reasonably well (though mostly with Linux), and the 2850 seems to fit > what I'm looking for. However I'm concerned about support for the > PERC4e/Di RAID controller, ie monitoring the state of. There was some > talk of support through LSI's own drivers (the link escapes me for the > minute), but this was for FBSD 5.n. Does anyone have any up to date > experience / info? sysutils/megarc. Monitors on 5.4. One would hope that it continues to in 6.X but I haven't tried. hth, --Alex From owner-freebsd-hardware@FreeBSD.ORG Wed Apr 19 04:07:06 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3EA5116A401 for ; Wed, 19 Apr 2006 04:07:06 +0000 (UTC) (envelope-from pyunyh@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.192]) by mx1.FreeBSD.org (Postfix) with ESMTP id 05EC543D46 for ; Wed, 19 Apr 2006 04:07:04 +0000 (GMT) (envelope-from pyunyh@gmail.com) Received: by nz-out-0102.google.com with SMTP id l8so1115644nzf for ; Tue, 18 Apr 2006 21:07:04 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:from:to:cc:subject:message-id:reply-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent; b=NWJg0j97FP9HeevvZVpF1A3SUaqHo/VkZqPfrcR2eMZ3mL8Qtpf2MSdBFyKMCBz+3C24AqaSz5fvCZKA8L2DGfmglZtF39wapQSRZYxqP1D0yWF3hmZdS4wx6wmnhdjbzEWdTF5ffhRhrw+cToW0OyN3AoYGFGhAPTLgLKGeYSE= Received: by 10.36.224.27 with SMTP id w27mr1543882nzg; Tue, 18 Apr 2006 21:07:04 -0700 (PDT) Received: from michelle.cdnetworks.co.kr ( [211.53.35.84]) by mx.gmail.com with ESMTP id c12sm921093nzc.2006.04.18.21.07.02; Tue, 18 Apr 2006 21:07:04 -0700 (PDT) Received: from michelle.cdnetworks.co.kr (localhost.cdnetworks.co.kr [127.0.0.1]) by michelle.cdnetworks.co.kr (8.13.5/8.13.5) with ESMTP id k3J47Q8U010809 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 19 Apr 2006 13:07:27 +0900 (KST) (envelope-from pyunyh@gmail.com) Received: (from yongari@localhost) by michelle.cdnetworks.co.kr (8.13.5/8.13.5/Submit) id k3J47P9F010808; Wed, 19 Apr 2006 13:07:25 +0900 (KST) (envelope-from pyunyh@gmail.com) Date: Wed, 19 Apr 2006 13:07:25 +0900 From: Pyun YongHyeon To: Andreas Bachmann Message-ID: <20060419040725.GA9899@cdnetworks.co.kr> References: <1145184791.25345.10.camel@localhost> <20060416120208.D4092@antec.home> <1145217454.25345.36.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1145217454.25345.36.camel@localhost> User-Agent: Mutt/1.4.2.1i Cc: freebsd-hackers@freebsd.org, Mikko Ty?l?j?rvi , freebsd-hardware@freebsd.org Subject: Re: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: pyunyh@gmail.com List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Apr 2006 04:07:06 -0000 On Sun, Apr 16, 2006 at 09:57:34PM +0200, Andreas Bachmann wrote: > > The bfe driver is broken for RAM sizes above 1G, and you have 2G. > > > > For kicks, you could try booting with hw.physmem="1G" (in loader.conf > > or manually). If that doesn't work, you have discovered a new bug. > > > > The ndis driver works on my H^HDell notebook (see ndisgen(8)). > I found your post to freebsd-mobile with the same text :-) > After limiting my physical memory, my NIC works now... > I will look at the ndisgen. > It seems that BCM440x has DMA address limit at 1GB. How about this? Index: if_bfe.c =================================================================== RCS file: /pool/ncvs/src/sys/dev/bfe/if_bfe.c,v retrieving revision 1.32 diff -u -r1.32 if_bfe.c --- if_bfe.c 4 Apr 2006 22:30:12 -0000 1.32 +++ if_bfe.c 19 Apr 2006 04:01:47 -0000 @@ -200,7 +200,7 @@ /* parent tag */ error = bus_dma_tag_create(NULL, /* parent */ PAGE_SIZE, 0, /* alignment, boundary */ - BUS_SPACE_MAXADDR, /* lowaddr */ + 0x3fffffff, /* lowaddr */ BUS_SPACE_MAXADDR_32BIT, /* highaddr */ NULL, NULL, /* filter, filterarg */ MAXBSIZE, /* maxsize */ -- Regards, Pyun YongHyeon From owner-freebsd-hardware@FreeBSD.ORG Wed Apr 19 18:55:36 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 47EAD16A404 for ; Wed, 19 Apr 2006 18:55:36 +0000 (UTC) (envelope-from bachi@te-clan.ch) Received: from te-clan.ch (ns1.te-clan.ch [217.118.194.40]) by mx1.FreeBSD.org (Postfix) with SMTP id F269143D6A for ; Wed, 19 Apr 2006 18:55:32 +0000 (GMT) (envelope-from bachi@te-clan.ch) Received: (qmail 27426 invoked from network); 19 Apr 2006 18:55:27 -0000 Received: from unknown (HELO ?10.0.0.251?) (80.219.57.164) by te-clan.ch with SMTP; 19 Apr 2006 18:55:27 -0000 From: Andreas Bachmann To: pyunyh@gmail.com In-Reply-To: <20060419040725.GA9899@cdnetworks.co.kr> References: <1145184791.25345.10.camel@localhost> <20060416120208.D4092@antec.home> <1145217454.25345.36.camel@localhost> <20060419040725.GA9899@cdnetworks.co.kr> Content-Type: text/plain Date: Wed, 19 Apr 2006 20:55:04 +0200 Message-Id: <1145472904.803.3.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.2.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-hardware@freebsd.org Subject: Re: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Apr 2006 18:55:36 -0000 > It seems that BCM440x has DMA address limit at 1GB. > How about this? > > Index: if_bfe.c > =================================================================== > RCS file: /pool/ncvs/src/sys/dev/bfe/if_bfe.c,v > retrieving revision 1.32 > diff -u -r1.32 if_bfe.c > --- if_bfe.c 4 Apr 2006 22:30:12 -0000 1.32 > +++ if_bfe.c 19 Apr 2006 04:01:47 -0000 > @@ -200,7 +200,7 @@ > /* parent tag */ > error = bus_dma_tag_create(NULL, /* parent */ > PAGE_SIZE, 0, /* alignment, boundary */ > - BUS_SPACE_MAXADDR, /* lowaddr */ > + 0x3fffffff, /* lowaddr */ > BUS_SPACE_MAXADDR_32BIT, /* highaddr */ > NULL, NULL, /* filter, filterarg */ > MAXBSIZE, /* maxsize */ Don't work with my Dell Inspiron 9400 notebook. Have replaced the following and have no change found. When I set an IP address for my bfe (Broadcom 440x), the system hangs... From owner-freebsd-hardware@FreeBSD.ORG Thu Apr 20 01:20:31 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5699B16A400 for ; Thu, 20 Apr 2006 01:20:31 +0000 (UTC) (envelope-from pyunyh@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.192]) by mx1.FreeBSD.org (Postfix) with ESMTP id B9EE043D45 for ; Thu, 20 Apr 2006 01:20:30 +0000 (GMT) (envelope-from pyunyh@gmail.com) Received: by nz-out-0102.google.com with SMTP id l8so10760nzf for ; Wed, 19 Apr 2006 18:20:30 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:from:to:cc:subject:message-id:reply-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent; b=aHN23IkS1HhgrlNn9Iz8Mvj+MUVXIQeVHbfCPnb0M3LqL0IOkrJQKo9FKNDJ8z7n7DFBY/koshw9k/AdVvJ8qnlr++Fj021U84ej3SFCGZBhOZe8fcFOOKCxV4tGHL4RNtuPNjSBUn4wjfQG8Tbs+BVsf0/l1GJWycZ7yISk1I0= Received: by 10.37.18.76 with SMTP id v76mr42954nzi; Wed, 19 Apr 2006 18:20:30 -0700 (PDT) Received: from michelle.cdnetworks.co.kr ( [211.53.35.84]) by mx.gmail.com with ESMTP id 34sm338375nza.2006.04.19.18.20.28; Wed, 19 Apr 2006 18:20:29 -0700 (PDT) Received: from michelle.cdnetworks.co.kr (localhost.cdnetworks.co.kr [127.0.0.1]) by michelle.cdnetworks.co.kr (8.13.5/8.13.5) with ESMTP id k3K1L35s019844 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 20 Apr 2006 10:21:03 +0900 (KST) (envelope-from pyunyh@gmail.com) Received: (from yongari@localhost) by michelle.cdnetworks.co.kr (8.13.5/8.13.5/Submit) id k3K1L1pK019843; Thu, 20 Apr 2006 10:21:01 +0900 (KST) (envelope-from pyunyh@gmail.com) Date: Thu, 20 Apr 2006 10:21:01 +0900 From: Pyun YongHyeon To: Andreas Bachmann Message-ID: <20060420012101.GA19456@cdnetworks.co.kr> References: <1145184791.25345.10.camel@localhost> <20060416120208.D4092@antec.home> <1145217454.25345.36.camel@localhost> <20060419040725.GA9899@cdnetworks.co.kr> <1145472904.803.3.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1145472904.803.3.camel@localhost> User-Agent: Mutt/1.4.2.1i Cc: freebsd-hardware@freebsd.org Subject: Re: Broadcom 440x on FreeBSD 6.0/6.1 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: pyunyh@gmail.com List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Apr 2006 01:20:31 -0000 On Wed, Apr 19, 2006 at 08:55:04PM +0200, Andreas Bachmann wrote: > > It seems that BCM440x has DMA address limit at 1GB. > > How about this? > > > > Index: if_bfe.c > > =================================================================== > > RCS file: /pool/ncvs/src/sys/dev/bfe/if_bfe.c,v > > retrieving revision 1.32 > > diff -u -r1.32 if_bfe.c > > --- if_bfe.c 4 Apr 2006 22:30:12 -0000 1.32 > > +++ if_bfe.c 19 Apr 2006 04:01:47 -0000 > > @@ -200,7 +200,7 @@ > > /* parent tag */ > > error = bus_dma_tag_create(NULL, /* parent */ > > PAGE_SIZE, 0, /* alignment, boundary */ > > - BUS_SPACE_MAXADDR, /* lowaddr */ > > + 0x3fffffff, /* lowaddr */ > > BUS_SPACE_MAXADDR_32BIT, /* highaddr */ > > NULL, NULL, /* filter, filterarg */ > > MAXBSIZE, /* maxsize */ > Don't work with my Dell Inspiron 9400 notebook. > Have replaced the following and have no change found. > When I set an IP address for my bfe (Broadcom 440x), > the system hangs... > Quick reading the source shows very strange/incorrect arguments in DMA tag creations and manipulations. It seems that busdma(9) portion of bfe(4) should be rewritten. Unfortunately I don't have the hardware and confirming to busdma(9) needs a working hardware. Sorry. You may contact the author of the driver or ship the hardware to me. -- Regards, Pyun YongHyeon From owner-freebsd-hardware@FreeBSD.ORG Thu Apr 20 07:36:51 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A6C7816A402 for ; Thu, 20 Apr 2006 07:36:51 +0000 (UTC) (envelope-from cochard@gmail.com) Received: from pproxy.gmail.com (pproxy.gmail.com [64.233.166.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 21B8543D45 for ; Thu, 20 Apr 2006 07:36:50 +0000 (GMT) (envelope-from cochard@gmail.com) Received: by pproxy.gmail.com with SMTP id t32so93385pyc for ; Thu, 20 Apr 2006 00:36:50 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:cc:in-reply-to:mime-version:content-type:references; b=ZQME2cKdWmnCQOA1Xjs49LQEksNoRTEH1t9gS0R/22IaSCilB2BDmFxhzJkv/w5tME82RYxRoly2AW3HvR90m7ZeheFBwHJmGVjEyr4aN9dkquIVO2r/x1Fxv5JFerQ7tbl+k9jGsZjYH86fHv2AxoFiDkgNhzCg43AcK+9Rn3c= Received: by 10.35.109.2 with SMTP id l2mr459716pym; Thu, 20 Apr 2006 00:36:50 -0700 (PDT) Received: by 10.35.91.16 with HTTP; Thu, 20 Apr 2006 00:36:50 -0700 (PDT) Message-ID: <3131aa530604200036p4d3e36f8nc8037d50a9d2f6b3@mail.gmail.com> Date: Thu, 20 Apr 2006 09:36:50 +0200 From: "Olivier Cochard" Sender: cochard@gmail.com To: "Mike Tancsa" In-Reply-To: <5kfj32hdo5ghrptq95cevc05354f8sm465@4ax.com> MIME-Version: 1.0 References: <3131aa530604070808y1ed68810gaac26c38853d0f76@mail.gmail.com> <5kfj32hdo5ghrptq95cevc05354f8sm465@4ax.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-hardware@freebsd.org Subject: Re: ATA problem with FreeBSD 6.1-PRERELEASE #10 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Apr 2006 07:36:51 -0000 Thanks for the tips: recompiling smartmontools and ataidle using the ports working great! Olivier -- Olivier Cochard FreeNAS main developer http://www.freenas.org Skype: callto://ocochard 2006/4/10, Mike Tancsa : > > On Fri, 7 Apr 2006 17:08:11 +0200, in sentex.lists.freebsd.hardware > you wrote: > > >Hi all, > >I meet a problem with some ATA tools (ataidle and smartmontool) and > FreeBSD > >6.1-PRERELEASE #10. > > > > > >$ smartctl -i /dev/ad0 > >smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 > Bruce > >Allen > >Home page is http://smartmontools.sourceforge.net/ > > > >Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) > > > There were changed to the ata driver that breaks binary compatibility > of the smartmontools. You will need to recompile the smartmontools > port and all will work again. > > > [tyan-1u]# smartctl -a /dev/ad0 | head > smartctl version 5.33 [i386-portbld-freebsd6.1] Copyright (C) 2002-4 > Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D > Device Model: ST340014A > Serial Number: 5JX5L5H4 > Firmware Version: 3.06 > User Capacity: 40,020,664,320 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 6 > [tyan-1u]# uname -a > FreeBSD tyan-1u.sentex.ca 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: > Wed Apr 5 07:46:21 EDT 2006 > mdtancsa@tyan-1u.sentex.ca:/usr/obj/usr/src/sys/SMP i386 > [tyan-1u]# > > > > ---Mike > > -------------------------------------------------------- > Mike Tancsa, Sentex communications http://www.sentex.net > Providing Internet Access since 1994 > mike@sentex.net, (http://www.tancsa.com) > From owner-freebsd-hardware@FreeBSD.ORG Thu Apr 20 09:39:10 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5234916A402 for ; Thu, 20 Apr 2006 09:39:10 +0000 (UTC) (envelope-from riemer@palstra.com) Received: from palstra.com (palstra.com [82.201.5.23]) by mx1.FreeBSD.org (Postfix) with ESMTP id F09E243D48 for ; Thu, 20 Apr 2006 09:39:09 +0000 (GMT) (envelope-from riemer@palstra.com) Received: from riemer by palstra.com with local (Exim 4.60 (FreeBSD)) (envelope-from ) id 1FWVcw-000Ggu-CB; Thu, 20 Apr 2006 11:39:06 +0200 Date: Thu, 20 Apr 2006 11:39:06 +0200 From: Riemer Palstra To: Alex Zbyslaw Message-ID: <20060420093906.GA62708@rb1.palstra.com> References: <20060418222644.B18394@bertha> <44456210.4010903@dial.pipex.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <44456210.4010903@dial.pipex.com> User-Agent: Mutt/1.4.2.1i Cc: Alex Dyas , freebsd-hardware@freebsd.org Subject: Re: FreeBSD on Dell 2850 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Apr 2006 09:39:10 -0000 On Tue, Apr 18, 2006 at 11:02:56PM +0100, Alex Zbyslaw wrote: > sysutils/megarc. Monitors on 5.4. One would hope that it continues to > in 6.X but I haven't tried. Working with FreeBSD 6.0 on i686 and amd64 for me (dispCfg, ctrlInfo, physOn/physOff, doRbld, etc.) -- Riemer Palstra Amsterdam, The Netherlands riemer@palstra.com http://www.palstra.com/ From owner-freebsd-hardware@FreeBSD.ORG Fri Apr 21 09:58:36 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5B9FB16A401 for ; Fri, 21 Apr 2006 09:58:36 +0000 (UTC) (envelope-from adyas@numbersix.net) Received: from mail18.bluewin.ch (mail18.bluewin.ch [195.186.19.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id 041FF43D49 for ; Fri, 21 Apr 2006 09:58:35 +0000 (GMT) (envelope-from adyas@numbersix.net) Received: from [192.168.0.2] (85.1.81.56) by mail18.bluewin.ch (Bluewin 7.2.072.1) id 44312C18003964B1; Fri, 21 Apr 2006 09:58:25 +0000 Date: Fri, 21 Apr 2006 11:58:26 +0200 (CEST) From: Alex Dyas X-X-Sender: adyas@bertha To: Riemer Palstra In-Reply-To: <20060420093906.GA62708@rb1.palstra.com> Message-ID: <20060421115514.A1155@bertha> References: <20060418222644.B18394@bertha> <44456210.4010903@dial.pipex.com> <20060420093906.GA62708@rb1.palstra.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: Alex Zbyslaw , freebsd-hardware@freebsd.org Subject: Re: FreeBSD on Dell 2850 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Apr 2006 09:58:36 -0000 Alex, Riemer, thanks for this. I've tried it on a spare 1850 and it seems to work well too (FBSD 6.0). Good on LSI for supporting FreeBSD! Cheers, Alex. On Thu, 20 Apr 2006, Riemer Palstra wrote: > On Tue, Apr 18, 2006 at 11:02:56PM +0100, Alex Zbyslaw wrote: >> sysutils/megarc. Monitors on 5.4. One would hope that it continues to >> in 6.X but I haven't tried. > > Working with FreeBSD 6.0 on i686 and amd64 for me (dispCfg, ctrlInfo, > physOn/physOff, doRbld, etc.) > > -- > Riemer Palstra Amsterdam, The Netherlands > riemer@palstra.com http://www.palstra.com/ > From owner-freebsd-hardware@FreeBSD.ORG Fri Apr 21 10:40:41 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BAED116A406 for ; Fri, 21 Apr 2006 10:40:41 +0000 (UTC) (envelope-from asdus@mail.ru) Received: from f36.mail.ru (f36.mail.ru [194.67.57.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5676043D4C for ; Fri, 21 Apr 2006 10:40:40 +0000 (GMT) (envelope-from asdus@mail.ru) Received: from mail by f36.mail.ru with local id 1FWt42-000KOY-00 for freebsd-hardware@freebsd.org; Fri, 21 Apr 2006 14:40:38 +0400 Received: from [80.252.150.251] by win.mail.ru with HTTP; Fri, 21 Apr 2006 14:40:38 +0400 From: =?koi8-r?Q?=E9=D7=C1=CE=20=EF=D7=DE=C5=D2=C5=CE=CB=CF?= To: freebsd-hardware@freebsd.org Mime-Version: 1.0 X-Mailer: mPOP Web-Mail 2.19 X-Originating-IP: [80.252.150.251] Date: Fri, 21 Apr 2006 14:40:38 +0400 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Message-Id: Subject: Ralink rt61-chipset based cards X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?koi8-r?Q?=E9=D7=C1=CE=20=EF=D7=DE=C5=D2=C5=CE=CB=CF?= List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Apr 2006 10:40:41 -0000 I have this card: none1@pci0:10:0: class=0x028000 card=0x25611814 chip=0x03011814 rev=0x00 hdr=0x00 vendor = 'Ralink Technology, Corp' class = network It's LevelOne WPC-0301 At ral(4) in supported device list written: LevelOne WPC-0301 v2 I think I have v1 card, because system doesn't detect it. Have a chance to work with this card in FreeBSD? (I use 6.1-RC #0 from CVS) WBR From owner-freebsd-hardware@FreeBSD.ORG Fri Apr 21 10:44:14 2006 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4ACCD16A400 for ; Fri, 21 Apr 2006 10:44:14 +0000 (UTC) (envelope-from asdus@mail.ru) Received: from f58.mail.ru (f58.mail.ru [194.67.57.92]) by mx1.FreeBSD.org (Postfix) with ESMTP id D3D7E43D55 for ; Fri, 21 Apr 2006 10:44:13 +0000 (GMT) (envelope-from asdus@mail.ru) Received: from mail by f58.mail.ru with local id 1FWt7U-000KpI-00 for freebsd-hardware@freebsd.org; Fri, 21 Apr 2006 14:44:12 +0400 Received: from [80.252.150.251] by win.mail.ru with HTTP; Fri, 21 Apr 2006 14:44:12 +0400 From: =?koi8-r?Q?=E9=D7=C1=CE=20=EF=D7=DE=C5=D2=C5=CE=CB=CF?= To: freebsd-hardware@freebsd.org Mime-Version: 1.0 X-Mailer: mPOP Web-Mail 2.19 X-Originating-IP: [80.252.150.251] Date: Fri, 21 Apr 2006 14:44:12 +0400 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Message-Id: Subject: Ralink rt61-chipset based cards X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?koi8-r?Q?=E9=D7=C1=CE=20=EF=D7=DE=C5=D2=C5=CE=CB=CF?= List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Apr 2006 10:44:14 -0000 I have this card: none1@pci0:10:0: class=0x028000 card=0x25611814 chip=0x03011814 rev=0x00 hdr=0x00 vendor = 'Ralink Technology, Corp' class = network It's LevelOne WPC-0301 At ral(4) in supported device list written: LevelOne WPC-0301 v2 I think I have v1 card, because system doesn't detect it. Have a chance to work with this card in FreeBSD? (I use 6.1-RC #0 from CVS) WBR