Date: Tue, 18 Jul 2006 13:25:04 +0200 From: Olivier Mueller <om-lists-bsd@omx.ch> To: freebsd-hardware@freebsd.org Subject: Re: dell poweredge 1950 : not rebooting under 6.1 (sometimes) + bce0 issues Message-ID: <1153221904.23956.25.camel@olipc.insign.local> In-Reply-To: <1152697468.31818.15.camel@olipc.insign.local> References: <1152697468.31818.15.camel@olipc.insign.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2006-07-12 at 11:44 +0200, Olivier Mueller wrote: > Any guess about what I should try? I recompiled the kernel > with & without apci support or some different options, but it didn't > helped yet. Another problem: I wanted to transfer large amount of data (10GB) using rsync via the network, and just after 60MB, the network card won't answser anymore, and here is what is displayed in dmesg: bce0: /usr/src/sys/dev/bce/if_bce.c(4644): Error mapping mbuf into TX chain! bce0: /usr/src/sys/dev/bce/if_bce.c(4644): Error mapping mbuf into TX chain! bce0: /usr/src/sys/dev/bce/if_bce.c(4644): Error mapping mbuf into TX chain! [...] Then if I let it continue, the server simply "crashes" (keyboard not responding, and no network access). $ dmesg | grep bce bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.5> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus0: <MII bus> on bce0 bce0: Ethernet address: 00:13:72:f8:6f:8c bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.5> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5 bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz miibus1: <MII bus> on bce1 bce1: Ethernet address: 00:13:72:f8:6f:8a To be continued, I'll continue to test, but it seems I will have to go back to linux for that PE 1950 server if it continues like that :/ regards, Olivier
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1153221904.23956.25.camel>