Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 26 Feb 2006 01:33:21 +0100
From:      Holger Kipp <hk@alogis.com>
To:        stable@freebsd.org
Subject:   Re: usb/scanimage broken on 6.1-PRERELEASE
Message-ID:  <20060226003321.GA69571@intserv.int1.b.intern>
In-Reply-To: <20060225212457.GA65987@intserv.int1.b.intern>
References:  <20060225212457.GA65987@intserv.int1.b.intern>

next in thread | previous in thread | raw e-mail | index | archive | help
Problem still exists with the latest 6.1-PRERELEASE - build
just finished (FreeBSD 6.1-PRERELEASE #11: Sun Feb 26 00:56:42 CET 2006).

scanimage will remain in state uscnrb.

Help and suggestions welcome!

Regards,
Holger Kipp



On Sat, Feb 25, 2006 at 10:24:57PM +0100, Holger Kipp wrote:
> Hello all,
> 
> on my (A) FreeBSD 6.1-PRERELEASE #10: Tue Feb 21 04:37:53 CET 2006
> I can't access my USB-Scanner Epson 1260 any more. It does work
> on my older kernels (some 5.4 from last year and a fairly recent
> (B) FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006,
> though). Dmesg of B and diff between B and A below.
> 
> Details:
> 
> root calling sane-find-scanner works (both A and B)
> root calling scanimage -L works for B, but only once
> for A (and for A I usually press ctrl-t to find out
> the state scanimage is in, because it does not return):
> 
>   katrin# time scanimage -L
>   device `plustek:/dev/uscanner0' is a Epson Perfection 1260/Photo USB flatbed scanner
>   load: 0.14  cmd: scanimage 860 [runnable] 0.00u 0.00s 0% 1852k
>   0.007u 0.000s 0:05.72 0.0%      0+0k 15+0io 5pf+0w
>   katrin# time scanimage -L
>   load: 0.06  cmd: scanimage 861 [runnable] 0.00u 0.00s 0% 1828k
> 
>   No scanners were identified. If you were expecting something different,
>   check that the scanner is plugged in, turned on and detected by the
>   sane-find-scanner tool (if appropriate). Please read the documentation
>   which came with this software (README, FAQ, manpages).
>   0.000u 0.006s 0:47.45 0.0%      0+0k 0+0io 0pf+0w
>   katrin# 
> 
>   ------------------
> 
>   This is what ps has to say about the status of scanimage
>   during both calls (before pressingt ctrl-t):
> 
>   katrin# ps axwl | grep scanimage
>       0   841   837   0   0  0  3820  1860 uscnrb S+    p1    0:00.01 scanimage -L
>   katrin# 
> 
> 
>   katrin# ps axwl | grep scanimage
>       0   861   839   0   0  0  3732  1836 uscnrb I+    p1    0:00.01 scanimage -L
>   katrin# 
> 
> Scanning is not possible under A.
> 
> Help would be really appreciated. Should I file a PR?
> Or should I first try to upgrade to the latest -STABLE?
> 
> Regards,
> Holger Kipp
> 
> Dmesg B:
> 
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006
>     root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
>   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>   AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
> real memory  = 536543232 (511 MB)
> avail memory = 515686400 (491 MB)
> ACPI APIC Table: <A M I  OEMAPIC >
> ioapic0: Changing APIC ID to 1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 0.3> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> atapci0: <VIA 6420 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f,0xd800-0xd8ff irq 20 at device 15.0 on pci0
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata1: <ATA channel 1> on atapci1
> uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <VIA 83C572 USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 21 at device 16.4 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <VIA VT6202 USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 2
> uhub5: multiple transaction translators
> uhub5: 4 ports with 4 removable, self powered
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <multimedia, audio> at device 17.5 (no driver attached)
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: Ethernet address: 00:0b:6a:c0:00:ce
> acpi_button0: <Power Button> on acpi0
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
> sio0: type 16550A
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
> Timecounter "TSC" frequency 2083112275 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 152627MB <SAMSUNG SP1614N TM100-30> at ata0-master UDMA100
> ad1: 76351MB <SAMSUNG SP0802N TK100-24> at ata0-slave UDMA100
> acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33
> acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4
> Trying to mount root from ufs:/dev/ad0s1a
> 
> 
> diff -u dmesgB dmesgA:
> --- dmesg_kernel_old    Sat Feb 25 21:43:41 2006
> +++ dmesg_kernel_new    Sat Feb 25 21:50:16 2006
> @@ -1,7 +1,7 @@
>  Copyright (c) 1992-2006 The FreeBSD Project.
>  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> -FreeBSD 6.1-PRERELEASE #9: Mon Feb 13 15:25:40 CET 2006
> +FreeBSD 6.1-PRERELEASE #10: Tue Feb 21 04:37:53 CET 2006
>      root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
>  Timecounter "i8254" frequency 1193182 Hz quality 0
>  CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU)
> @@ -71,7 +71,9 @@
>  uhub5: 4 ports with 4 removable, self powered
>  isab0: <PCI-ISA bridge> at device 17.0 on pci0
>  isa0: <ISA bus> on isab0
> -pci0: <multimedia, audio> at device 17.5 (no driver attached)
> +pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
> +pcm0: <C-Media Electronics CMI9761 AC97 Codec>
> +pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
>  vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
>  miibus0: <MII bus> on vr0
>  ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> @@ -102,7 +104,7 @@
>  ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
>  ums0: 5 buttons and Z dir.
>  uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
> -Timecounter "TSC" frequency 2083112275 Hz quality 800
> +Timecounter "TSC" frequency 2083112413 Hz quality 800
>  Timecounters tick every 1.000 msec
>  ad0: 152627MB <SAMSUNG SP1614N TM100-30> at ata0-master UDMA100
>  ad1: 76351MB <SAMSUNG SP0802N TK100-24> at ata0-slave UDMA100
> 
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060226003321.GA69571>