From owner-freebsd-x11@FreeBSD.ORG Sun Apr 16 09:45:03 2006 Return-Path: X-Original-To: freebsd-x11@freebsd.org Delivered-To: freebsd-x11@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B8BA716A402 for ; Sun, 16 Apr 2006 09:45:03 +0000 (UTC) (envelope-from gofdx-freebsd-x11@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2BD7043D46 for ; Sun, 16 Apr 2006 09:45:02 +0000 (GMT) (envelope-from gofdx-freebsd-x11@m.gmane.org) Received: from list by ciao.gmane.org with local (Exim 4.43) id 1FV3oO-0001se-8Q for freebsd-x11@freebsd.org; Sun, 16 Apr 2006 11:44:56 +0200 Received: from AToulouse-151-1-18-233.w83-203.abo.wanadoo.fr ([83.203.0.233]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 16 Apr 2006 11:44:56 +0200 Received: from olivier.saut by AToulouse-151-1-18-233.w83-203.abo.wanadoo.fr with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 16 Apr 2006 11:44:56 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-x11@freebsd.org From: Olivier Saut Date: Sun, 16 Apr 2006 09:44:51 +0000 (UTC) Lines: 28 Message-ID: References: <1145118109.5981.4.camel@fbsd1.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: main.gmane.org User-Agent: Loom/3.14 (http://gmane.org/) X-Loom-IP: 83.203.0.233 (Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.0.2) Gecko/20060328 Firefox/1.5.0.2) Sender: news Subject: Re: Xorg on ATI Radeon 1600 Pro X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Apr 2006 09:45:03 -0000 Scott T. Hildreth sbcglobal.net> writes: > > On Sat, 2006-04-15 at 14:13 +0000, Olivier Saut wrote: > > Hello, > > > > I am trying to run X with an ATI Radeon 1600 Pro (RV530 chipset I think) on > > FreeBSD 6.1-RC1. > > I am able to run X with xorg 6.9 and the vesa driver but the refresh rate is > > stuck at 60 Hz. > > This card is not supported by the FreeBSD fglrx driver. > > Is there a way to increase the refresh rate (1280x1024 85Hz works on my monitor)? > > I assume this is a CRT, since you are asking about refresh rates. The > Vesas driver is generic, I don't know how much you can adjust. Have you > run xorgcfg? You can try xvidtune to adjust the parameters until you get > the right refresh rate. Then save the modeline and put it in your > xorg.conf. I you use xorgcfg (graphical configure), it is easier to > tweak the config. Yes this is a CRT. I have tried to use modelines and xvidtune but it does not work. I can not change the rate with xvidtune. Thanks, - Olivier From owner-freebsd-x11@FreeBSD.ORG Mon Apr 17 16:14:46 2006 Return-Path: X-Original-To: freebsd-x11@freebsd.org Delivered-To: freebsd-x11@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 51F1B16A400 for ; Mon, 17 Apr 2006 16:14:46 +0000 (UTC) (envelope-from neshort@yahoo.com) Received: from web30711.mail.mud.yahoo.com (web30711.mail.mud.yahoo.com [68.142.201.249]) by mx1.FreeBSD.org (Postfix) with SMTP id 2013643D4C for ; Mon, 17 Apr 2006 16:14:44 +0000 (GMT) (envelope-from neshort@yahoo.com) Received: (qmail 88509 invoked by uid 60001); 17 Apr 2006 16:14:44 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=PWXX0m0ramVnFtYLSf4do3px44dOcS6ub1bjKcsariGORcFAVsnNJ4zWYdX02djd16AFcKZYHBeQIj0Hwl0KbaMhcgVMA7ziSNRF/IdbfbWKtyziDRLzy/580sfeyNOd4Qji0NqlKXJiBmpbssmb8sxtW0S6N30IcBCi5tAywbs= ; Message-ID: <20060417161444.88507.qmail@web30711.mail.mud.yahoo.com> Received: from [208.240.243.170] by web30711.mail.mud.yahoo.com via HTTP; Mon, 17 Apr 2006 09:14:44 PDT Date: Mon, 17 Apr 2006 09:14:44 -0700 (PDT) From: Neil Short To: freebsd-x11@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Subject: does XFree86 have better hardware detection than Xorg? X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 16:14:46 -0000 Is it possible that XFree86 will handle detection of my equipment better than Xorg does? I have a Toshiba A105-S101 with an ATI 200M video device and a 1280x800 video screen. Xorg will drive that video only at 1024x768 and only with the vesa video driver. ====== Now I, Nebuchadnezzar, praise and extol and honor the King of heaven, for all his works are truth, and his ways are justice; and he is able to bring low those who walk in pride. Daniel 4:37 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-x11@FreeBSD.ORG Mon Apr 17 18:40:24 2006 Return-Path: X-Original-To: x11@freebsd.org Delivered-To: freebsd-x11@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D7BDE16A400 for ; Mon, 17 Apr 2006 18:40:24 +0000 (UTC) (envelope-from jumpyboy@infinito.it) Received: from bastian.ksniffer.org (xd-85-20-110-70.rm2.albacom.net [85.20.110.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8199B43D49 for ; Mon, 17 Apr 2006 18:40:22 +0000 (GMT) (envelope-from jumpyboy@infinito.it) Received: (qmail 681 invoked by uid 89); 17 Apr 2006 20:43:25 +0200 Received: from qmail by qscan (mail filter); 17 Apr 2006 18:43:24 +0000 Received: from unknown (HELO destino.ilmandarino.org) (giovanni@ksniffer.org@192.168.1.25) by bastian.ksniffer.org with EXP1024-RC4-SHA encrypted SMTP; 17 Apr 2006 20:43:24 +0200 From: Giovanni To: x11@freebsd.org Date: Mon, 17 Apr 2006 20:40:15 +0200 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2384977.5rtDstJYAl"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200604172040.20424.jumpyboy@infinito.it> Cc: ports@freebsd.org Subject: FreeBSD Port: xorg-libraries-6.9.0 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 18:40:25 -0000 --nextPart2384977.5rtDstJYAl Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline I was compiling xorg-libraries-6.9.0 from ports on FreeBSD 5.4 and I get: cc -c -O -pipe -ansi -pedantic -Wno-system-headers -Dasm=3D__asm -= Wall -Wpointer-arith -Wundef -I/usr/local/include -I/usr/local/include/fre= etype2 -I/usr/local/include/freetype2/config -I. -I/usr/ports/x11/xorg-libr= aries/work/xc/include/fonts -I../include -I/usr/ports/x11/xorg-libraries/wo= rk/xc/exports/include/X11 -I/usr/ports/x11/xorg-libraries/work/x= c/programs/Xserver/include -I/usr/ports/x11/xorg-libraries/work= /xc/exports/include -I/usr/ports/x11/xorg-libraries/work/xc -I/usr/ports/x= 11/xorg-libraries/work/xc/exports/include -I/usr/X11R6/include -DCSRG_BASE= D -DFUNCPROTO=3D15 -DNARROWPROTO -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV= -DSINGLEDEPTH -DXFreeXDGA -DXvExtension = -DXFree86LOADER -DDLOPEN_HACK -DXFree86Server = -DXF86VIDMODE -DXvMCExtension = -DSMART_SCHEDULE -DBUILD= DEBUG -DXResExtension -DX_BYTE_ORDER=3DX_LITTLE_= ENDIAN -DXORG_VERSION_CURRENT=3D"(((6)=20 * 10000000) + ((9) * 100000) + ((0) * 1000) +=20 0)" -DXFREE86_FT2 -fPIC xttcap.c rm -f ftfuncs.o unshared/ftfuncs.o cc -c -ansi -pedantic -Wno-system-headers -Dasm=3D__asm -Wall -Wpointer-a= rith -Wundef -I/usr/local/include -I/usr/local/include/freetype2 -I/usr/lo= cal/include/freetype2/config -I. -I/usr/ports/x11/xorg-libraries/work/xc/in= clude/fonts -I../include -I/usr/ports/x11/xorg-libraries/work/xc/exports/in= clude/X11 -I/usr/ports/x11/xorg-libraries/work/xc/programs/Xserv= er/include -I/usr/ports/x11/xorg-libraries/work/xc/exports/incl= ude -I/usr/ports/x11/xorg-libraries/work/xc -I/usr/ports/x11/xorg-librarie= s/work/xc/exports/include -I/usr/X11R6/include -DCSRG_BASED -DFUNCPROTO= =3D15 -DNARROWPROTO -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH= -DXFreeXDGA -DXvExtension = -DXFree86LOADER -DDLOPEN_HACK -DXFree86Server = -DXF86VIDMODE -DXvMCExtension = -DSMART_SCHEDULE -DBUI= LDDEBUG -DXResExtension -DX_BYTE_ORDER=3DX_LITTL= E_ENDIAN -DXORG_VERSION_CURRENT=3D"(((6)=20 * 10000000) + ((9) * 100000) + ((0) * 1000) +=20 0)" -DXFREE86_FT2 -O -pipe ftfuncs.c -o=20 unshared/ftfuncs.o ftfuncs.c:49:22: ft2build.h: No such file or directory ftfuncs.c:50:10: #include expects "FILENAME" or ftfuncs.c:51:10: #include expects "FILENAME" or ftfuncs.c:52:10: #include expects "FILENAME" or ftfuncs.c:53:10: #include expects "FILENAME" or ftfuncs.c:54:10: #include expects "FILENAME" or ftfuncs.c:55:10: #include expects "FILENAME" or ftfuncs.c:56:10: #include expects "FILENAME" or ftfuncs.c:57:10: #include expects "FILENAME" or ftfuncs.c:58:10: #include expects "FILENAME" or ftfuncs.c:59:10: #include expects "FILENAME" or ftfuncs.c:60:10: #include expects "FILENAME" or In file included from ftfuncs.c:71: ft.h:70: error: syntax error before "FT_CharMap" ft.h:85: error: syntax error before "FT_Face" ft.h:86: error: syntax error before "face" ft.h:91: error: syntax error before "int" In file included from ftfuncs.c:72: ftfuncs.h:48: error: syntax error before "FT_Face" ftfuncs.h:59: error: syntax error before "FT_Matrix" ftfuncs.h:121: error: syntax error before "FT_Size" ftfuncs.h:123: error: syntax error before "FT_Int32" ftfuncs.h:165: error: syntax error before "FT_Int32" ftfuncs.h:185: error: syntax error before "FT_Int32" ftfuncs.c:127: error: syntax error before "ftypeLibrary" ftfuncs.c:127: warning: type defaults to `int' in declaration of=20 `ftypeLibrary' ftfuncs.c:127: error: ISO C forbids data definition with no type or storage= =20 class ftfuncs.c: In function `FreeTypeOpenFace': ftfuncs.c:159: error: syntax error before "ftrc" ftfuncs.c:164: error: `ftrc' undeclared (first use in this function) ftfuncs.c:164: error: (Each undeclared identifier is reported only once ftfuncs.c:164: error: for each function it appears in.) ftfuncs.c:164: warning: implicit declaration of function `FT_Init_FreeType' ftfuncs.c:199: warning: implicit declaration of function `FT_New_Face' ftfuncs.c:199: error: structure has no member named `face' ftfuncs.c:207: error: structure has no member named `face' ftfuncs.c:207: error: `FT_FACE_FLAG_SCALABLE' undeclared (first use in this= =20 function) ftfuncs.c:209: error: `TT_MaxProfile' undeclared (first use in this functio= n) ftfuncs.c:209: error: `maxp' undeclared (first use in this function) ftfuncs.c:210: warning: implicit declaration of function `FT_Get_Sfnt_Table' ftfuncs.c:210: error: structure has no member named `face' ftfuncs.c:210: error: `ft_sfnt_maxp' undeclared (first use in this function) ftfuncs.c: In function `FreeTypeFreeFace': ftfuncs.c:244: warning: implicit declaration of function `FT_Done_Face' ftfuncs.c:244: error: structure has no member named `face' ftfuncs.c: In function `TransEqual': ftfuncs.c:261: error: structure has no member named `matrix' ftfuncs.c:261: error: structure has no member named `matrix' ftfuncs.c:262: error: structure has no member named `matrix' ftfuncs.c:262: error: structure has no member named `matrix' ftfuncs.c:263: error: structure has no member named `matrix' ftfuncs.c:263: error: structure has no member named `matrix' ftfuncs.c:264: error: structure has no member named `matrix' ftfuncs.c:264: error: structure has no member named `matrix' ftfuncs.c: At top level: ftfuncs.c:304: error: syntax error before "FT_Int32" ftfuncs.c: In function `FTInstanceMatch': ftfuncs.c:306: error: `instance' undeclared (first use in this function) ftfuncs.c:306: error: `FTFileName' undeclared (first use in this function) ftfuncs.c:308: error: `trans' undeclared (first use in this function) ftfuncs.c:310: error: `spacing' undeclared (first use in this function) ftfuncs.c:312: error: `load_flags' undeclared (first use in this function) ftfuncs.c:314: error: `bmfmt' undeclared (first use in this function) ftfuncs.c:316: error: `tmp_ttcap' undeclared (first use in this function) ftfuncs.c: In function `FreeTypeActivateInstance': ftfuncs.c:326: error: syntax error before "ftrc" ftfuncs.c:330: error: `ftrc' undeclared (first use in this function) ftfuncs.c:330: warning: implicit declaration of function `FT_Activate_Size' ftfuncs.c:330: error: structure has no member named `size' ftfuncs.c:336: warning: implicit declaration of function `FT_Set_Transform' ftfuncs.c:336: error: structure has no member named `face' ftfuncs.c:338: error: structure has no member named `matrix' ftfuncs.c: At top level: ftfuncs.c:346: error: syntax error before "face" ftfuncs.c: In function `FTFindSize': ftfuncs.c:353: error: `trans' undeclared (first use in this function) ftfuncs.c:361: error: `face' undeclared (first use in this function) ftfuncs.c:375: error: `x_return' undeclared (first use in this function) ftfuncs.c:376: error: `y_return' undeclared (first use in this function) ftfuncs.c: At top level: ftfuncs.c:384: error: syntax error before "FT_Int32" ftfuncs.c: In function `FreeTypeOpenInstance': ftfuncs.c:386: error: syntax error before "ftrc" ftfuncs.c:391: error: `face' undeclared (first use in this function) ftfuncs.c:394: error: `FTFileName' undeclared (first use in this function) ftfuncs.c:394: error: `trans' undeclared (first use in this function) ftfuncs.c:394: error: `spacing' undeclared (first use in this function) ftfuncs.c:394: error: `bmfmt' undeclared (first use in this function) ftfuncs.c:395: error: `tmp_ttcap' undeclared (first use in this function) ftfuncs.c:395: error: `load_flags' undeclared (first use in this function) ftfuncs.c:400: error: `instance_return' undeclared (first use in this=20 function) ftfuncs.c:413: error: structure has no member named `load_flags' ftfuncs.c:429: error: structure has no member named `face' ftfuncs.c:431: error: structure has no member named `face' ftfuncs.c:437: error: `ftrc' undeclared (first use in this function) ftfuncs.c:437: warning: implicit declaration of function `FT_New_Size' ftfuncs.c:437: error: structure has no member named `face' ftfuncs.c:437: error: structure has no member named `size' ftfuncs.c:445: warning: implicit declaration of function `FT_Set_Char_Size' ftfuncs.c:445: error: structure has no member named `face' ftfuncs.c:456: warning: implicit declaration of function `FT_Set_Pixel_Size= s' ftfuncs.c:456: error: structure has no member named `face' ftfuncs.c:459: warning: implicit declaration of function `FT_Done_Size' ftfuncs.c:459: error: structure has no member named `size' ftfuncs.c:464: warning: implicit declaration of function `FT_IS_SFNT' ftfuncs.c:466: error: syntax error before "err" ftfuncs.c:472: error: `tt_face' undeclared (first use in this function) ftfuncs.c:472: error: `TT_Face' undeclared (first use in this function) ftfuncs.c:472: error: syntax error before "face" ftfuncs.c:473: error: `tt_char_width' undeclared (first use in this functio= n) ftfuncs.c:474: error: `tt_char_height' undeclared (first use in this functi= on) ftfuncs.c:476: error: `tt_dim_x' undeclared (first use in this function) ftfuncs.c:477: error: `tt_dim_y' undeclared (first use in this function) ftfuncs.c:483: error: `tt_x_ppem' undeclared (first use in this function) ftfuncs.c:483: error: `FT_UShort' undeclared (first use in this function) ftfuncs.c:484: error: `tt_y_ppem' undeclared (first use in this function) ftfuncs.c:486: error: `sfnt' undeclared (first use in this function) ftfuncs.c:486: error: `SFNT_Service' undeclared (first use in this function) ftfuncs.c:486: error: syntax error before "tt_face" ftfuncs.c:487: error: `err' undeclared (first use in this function) ftfuncs.c:487: error: structure has no member named `strike_index' ftfuncs.c:488: error: structure has no member named `strike_index' ftfuncs.c: In function `FreeTypeFreeInstance': ftfuncs.c:524: error: structure has no member named `size' ftfuncs.c: At top level: ftfuncs.c:808: error: syntax error before '*' token ftfuncs.c: In function `tt_get_metrics': ftfuncs.c:815: error: syntax error before "longs_m" ftfuncs.c:818: error: `k' undeclared (first use in this function) ftfuncs.c:819: error: `bearing' undeclared (first use in this function) ftfuncs.c:819: error: `advance' undeclared (first use in this function) ftfuncs.c:823: error: `idx' undeclared (first use in this function) ftfuncs.c:823: error: `FT_UInt' undeclared (first use in this function) ftfuncs.c:823: error: syntax error before "k" ftfuncs.c:825: error: `longs_m' undeclared (first use in this function) ftfuncs.c: At top level: ftfuncs.c:828: error: syntax error before "else" ftfuncs.c:158: warning: 'FreeTypeOpenFace' defined but not used ftfuncs.c:385: warning: 'FreeTypeOpenInstance' defined but not used ftfuncs.c:501: warning: 'FreeTypeFreeInstance' defined but not used ftfuncs.c:620: warning: 'FreeTypeInstanceGetGlyph' defined but not used ftfuncs.c:667: warning: 'FreeTypeInstanceGetGlyphMetrics' defined but not u= sed ftfuncs.h:174: warning: 'FreeTypeRasteriseGlyph' declared `static' but neve= r=20 defined ftfuncs.h:175: warning: 'FreeTypeFreeFont' declared `static' but never defi= ned ftfuncs.h:176: warning: 'FreeTypeFreeXFont' declared `static' but never=20 defined ftfuncs.h:177: warning: 'FreeTypeUnloadXFont' declared `static' but never=20 defined ftfuncs.h:180: warning: 'FreeTypeAddProperties' declared `static' but never= =20 defined ftfuncs.h:181: warning: 'FreeTypeFontGetGlyph' declared `static' but never= =20 defined ftfuncs.h:187: warning: 'FreeTypeLoadFont' declared `static' but never defi= ned ftfuncs.c:102: warning: 'noSuchChar' defined but not used ftfuncs.c:108: warning: 'xlfd_props' defined but not used ftfuncs.c:721: warning: 'ft_make_up_bold_bitmap' defined but not used ftfuncs.c:755: warning: 'ft_make_up_italic_bitmap' defined but not used ftfuncs.c:814: warning: 'tt_get_metrics' defined but not used *** Error code 1 Stop in /usr/ports/x11/xorg-libraries/work/xc/lib/font/FreeType. *** Error code 1 Stop in /usr/ports/x11/xorg-libraries/work/xc/lib/font. *** Error code 1 Stop in /usr/ports/x11/xorg-libraries/work/xc/lib. *** Error code 1 Stop in /usr/ports/x11/xorg-libraries. *** Error code 1 Why? :( Giovanni --nextPart2384977.5rtDstJYAl Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD4DBQBEQ+EUPfGQefXd0v0RAoPTAKCiGHF4KJSva5GH5slS299RC61y4gCYhzJk d76VODHHX3kk8fduFW5sag== =3+Kl -----END PGP SIGNATURE----- --nextPart2384977.5rtDstJYAl-- From owner-freebsd-x11@FreeBSD.ORG Mon Apr 17 18:51:16 2006 Return-Path: X-Original-To: x11@freebsd.org Delivered-To: freebsd-x11@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 49FED16A407; Mon, 17 Apr 2006 18:51:16 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id DBB4443D6B; Mon, 17 Apr 2006 18:51:10 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id C4DD31A4E5A; Mon, 17 Apr 2006 11:51:10 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 120485169C; Mon, 17 Apr 2006 14:51:10 -0400 (EDT) Date: Mon, 17 Apr 2006 14:51:09 -0400 From: Kris Kennaway To: Giovanni Message-ID: <20060417185109.GA93893@xor.obsecurity.org> References: <200604172040.20424.jumpyboy@infinito.it> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="d6Gm4EdcadzBjdND" Content-Disposition: inline In-Reply-To: <200604172040.20424.jumpyboy@infinito.it> User-Agent: Mutt/1.4.2.1i Cc: ports@freebsd.org, x11@freebsd.org Subject: Re: FreeBSD Port: xorg-libraries-6.9.0 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 18:51:16 -0000 --d6Gm4EdcadzBjdND Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Apr 17, 2006 at 08:40:15PM +0200, Giovanni wrote: > I was compiling xorg-libraries-6.9.0 from ports on FreeBSD 5.4 and I get: >=20 >=20 > cc -c -O -pipe -ansi -pedantic -Wno-system-headers -Dasm=3D__asm = -Wall -Wpointer-arith -Wundef -I/usr/local/include -I/usr/local/include/f= reetype2 -I/usr/local/include/freetype2/config -I. -I/usr/ports/x11/xorg-li= braries/work/xc/include/fonts -I../include -I/usr/ports/x11/xorg-libraries/= work/xc/exports/include/X11 -I/usr/ports/x11/xorg-libraries/work= /xc/programs/Xserver/include -I/usr/ports/x11/xorg-libraries/wo= rk/xc/exports/include -I/usr/ports/x11/xorg-libraries/work/xc -I/usr/ports= /x11/xorg-libraries/work/xc/exports/include -I/usr/X11R6/include -DCSRG_BA= SED -DFUNCPROTO=3D15 -DNARROWPROTO -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPR= IV -DSINGLEDEPTH -DXFreeXDGA -DXvExtension = -DXFree86LOADER -DDLOPEN_HACK -DXFree86Server = -DXF86VIDMODE -DXvMCExtension = -DSMART_SCHEDULE -DBUI= LDDEBUG -DXResExtension -DX_BYTE_ORDER=3DX_LITTL= E_ENDIAN -DXORG_VERSION_CURRENT=3D"(((6)=20 > * 10000000) + ((9) * 100000) + ((0) * 1000) +=20 > 0)" -DXFREE86_FT2 -fPIC xttcap.c > rm -f ftfuncs.o unshared/ftfuncs.o > cc -c -ansi -pedantic -Wno-system-headers -Dasm=3D__asm -Wall -Wpointer= -arith -Wundef -I/usr/local/include -I/usr/local/include/freetype2 -I/usr/= local/include/freetype2/config -I. -I/usr/ports/x11/xorg-libraries/work/xc/= include/fonts -I../include -I/usr/ports/x11/xorg-libraries/work/xc/exports/= include/X11 -I/usr/ports/x11/xorg-libraries/work/xc/programs/Xse= rver/include -I/usr/ports/x11/xorg-libraries/work/xc/exports/in= clude -I/usr/ports/x11/xorg-libraries/work/xc -I/usr/ports/x11/xorg-librar= ies/work/xc/exports/include -I/usr/X11R6/include -DCSRG_BASED -DFUNCPROTO= =3D15 -DNARROWPROTO -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH= -DXFreeXDGA -DXvExtension = -DXFree86LOADER -DDLOPEN_HACK -DXFree86Server = -DXF86VIDMODE -DXvMCExtension = -DSMART_SCHEDULE -DBUI= LDDEBUG -DXResExtension -DX_BYTE_ORDER=3DX_LITTL= E_ENDIAN -DXORG_VERSION_CURRENT=3D"(((6)=20 > * 10000000) + ((9) * 100000) + ((0) * 1000) +=20 > 0)" -DXFREE86_FT2 -O -pipe ftfuncs.c -o=20 > unshared/ftfuncs.o > ftfuncs.c:49:22: ft2build.h: No such file or directory Update your freetype2 port. Kris --d6Gm4EdcadzBjdND Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEQ+OdWry0BWjoQKURAoumAJ4qpCEHmD65EeIy2nL/Hdza+Nx51wCfXIXH fI4bhVFAeFCMPMbIZKs3lG8= =Uljn -----END PGP SIGNATURE----- --d6Gm4EdcadzBjdND-- From owner-freebsd-x11@FreeBSD.ORG Mon Apr 17 19:40:53 2006 Return-Path: X-Original-To: freebsd-x11@freebsd.org Delivered-To: freebsd-x11@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 02A3F16A401 for ; Mon, 17 Apr 2006 19:40:53 +0000 (UTC) (envelope-from chris@Shenton.Org) Received: from Shenton.org (23.ebbed1.client.atlantech.net [209.190.235.35]) by mx1.FreeBSD.org (Postfix) with ESMTP id 39BC543D46 for ; Mon, 17 Apr 2006 19:40:51 +0000 (GMT) (envelope-from chris@Shenton.Org) Received: (qmail 89989 invoked by uid 1001); 17 Apr 2006 19:40:51 -0000 From: Chris Shenton To: Eric Anholt References: <20060411093314.38960.qmail@web31805.mail.mud.yahoo.com> <1144793828.27083.13.camel@leguin> Date: Mon, 17 Apr 2006 15:40:50 -0400 In-Reply-To: <1144793828.27083.13.camel@leguin> (Eric Anholt's message of "Tue, 11 Apr 2006 15:17:08 -0700") Message-ID: <86hd4s0z3x.fsf@PECTOPAH.shenton.org> User-Agent: Gnus/5.110004 (No Gnus v0.4) Emacs/21.3 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-x11@freebsd.org, Jason Morgan Subject: Re: X troubles (possibly radeon related) X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 19:40:53 -0000 Eric Anholt writes: > I would probably switch to "radeon" without DRI. If that doesn't work, > "vesa". Nobody uses "vga", so it may be broken. I've tried "radeon" without DRI but get blue blotches in Mozilla and GAIM and some others where graphics shoudl be. Others have commented they get the same. I can use VESA but can't configure it to drive my big LCD, it doesn't want to do the 19200x1600; I think the most it did was 1600x1200. If there's a way to do this I'm all ears. Thanks. From owner-freebsd-x11@FreeBSD.ORG Mon Apr 17 21:47:04 2006 Return-Path: X-Original-To: freebsd-x11@freebsd.org Delivered-To: freebsd-x11@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 695A216A406 for ; Mon, 17 Apr 2006 21:47:04 +0000 (UTC) (envelope-from alvest@earthlink.net) Received: from elasmtp-spurfowl.atl.sa.earthlink.net (elasmtp-spurfowl.atl.sa.earthlink.net [209.86.89.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1140843D5C for ; Mon, 17 Apr 2006 21:46:54 +0000 (GMT) (envelope-from alvest@earthlink.net) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=HFhqoi++KXpuwwBrT44KsxfENdEkp3XXILkLIs3cPrbwW+lD+AV8Y6WUJ7fUmW/l; h=Received:Date:From:To:Subject:Message-Id:In-Reply-To:References:X-Mailer:Mime-Version:Content-Type:Content-Transfer-Encoding:X-ELNK-Trace:X-Originating-IP; Received: from [24.145.140.165] (helo=localhost) by elasmtp-spurfowl.atl.sa.earthlink.net with asmtp (Exim 4.34) id 1FVbYa-0007r4-Dd for freebsd-x11@freebsd.org; Mon, 17 Apr 2006 17:46:54 -0400 Date: Mon, 17 Apr 2006 17:46:46 -0400 From: Albert Vest To: freebsd-x11@freebsd.org Message-Id: <20060417174646.55ba3223.alvest@earthlink.net> In-Reply-To: <86hd4s0z3x.fsf@PECTOPAH.shenton.org> References: <20060411093314.38960.qmail@web31805.mail.mud.yahoo.com> <1144793828.27083.13.camel@leguin> <86hd4s0z3x.fsf@PECTOPAH.shenton.org> X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-ELNK-Trace: a37e7a5645c8e49994f5150ab1c16ac04be4f309a0cc41dd5601c83f64e8b2aaca4466a627af0a4d350badd9bab72f9c350badd9bab72f9c350badd9bab72f9c X-Originating-IP: 24.145.140.165 Subject: Re: X troubles (possibly radeon related) X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Apr 2006 21:47:04 -0000 On Mon, 17 Apr 2006 15:40:50 -0400 Chris Shenton wrote: > Eric Anholt writes: > > > I would probably switch to "radeon" without DRI. If that doesn't work, > > "vesa". Nobody uses "vga", so it may be broken. > > I've tried "radeon" without DRI but get blue blotches in Mozilla and > GAIM and some others where graphics shoudl be. Others have commented > they get the same. Not mine, as long as I keep DRI off, "radeon" works golden. > I can use VESA but can't configure it to drive my big LCD, it doesn't > want to do the 19200x1600; I think the most it did was 1600x1200. My lcd screen has natural 1280x1020 resolution, so that may help too. Are you dedicating enough video ram in your BIOS setup? -- Albert Vest, al vest at earth link dot net From owner-freebsd-x11@FreeBSD.ORG Thu Apr 20 13:36:34 2006 Return-Path: X-Original-To: freebsd-x11@FreeBSD.org Delivered-To: freebsd-x11@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E6C116A401 for ; Thu, 20 Apr 2006 13:36:34 +0000 (UTC) (envelope-from mich@FreeBSD.org) Received: from mail2.itxmarket.com (fw.itxmarket.com [213.11.40.109]) by mx1.FreeBSD.org (Postfix) with ESMTP id 967E743D46 for ; Thu, 20 Apr 2006 13:36:33 +0000 (GMT) (envelope-from mich@FreeBSD.org) Received: from icommerce.fr (mich2.itxmarket.com [192.168.2.26]) by mail2.itxmarket.com (Postfix) with ESMTP id 993AE1C08DA for ; Thu, 20 Apr 2006 15:36:32 +0200 (CEST) Received: by icommerce.fr (Postfix, from userid 1001) id 8F74122824; Thu, 20 Apr 2006 15:36:32 +0200 (CEST) Date: Thu, 20 Apr 2006 15:36:32 +0200 From: Michael Landin Hostbaek To: FreeBSD X11 Message-ID: <20060420133632.GA24988@mich2.itxmarket.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="n8g4imXOkfNTN/H1" Content-Disposition: inline X-Operating-System: FreeBSD 6.0-STABLE i386 X-PGP-Key: http://www.freebsdcluster.org/~mich/ User-Agent: Mutt/1.5.11 Cc: Subject: Dual-head with i810 X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Apr 2006 13:36:34 -0000 --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline List, I've got a Fujitsu-Siemens S7010 laptop, with a: agp0: on vgapci0 Initally I wanted to have two external flatscreens attached on the dockingstation (VGA connector, and a DVI-D connector) - but it seems this is not possbile.. (according to the Intel documentation). So I wanted to settle for one external flatscreen and the laptop display. Attached you'll find a copy of my xorg.conf thus far... Comparing it with versions found with google, this should work.. Unfortunately it does not. When launching Xorg, it simply hangs and locks the laptop while eating CPU time. Xorg.0.log says: (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.9.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.8 (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/libint10.so (II) I810(0): initializing int10 (==) I810(0): Write-combining range (0xa0000,0x20000) was already clear (==) I810(0): Write-combining range (0xc0000,0x40000) was already clear (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (==) I810(0): Write-combining range (0x0,0x1000) was already clear What am I missing ? /mich --n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="xorg.conf.progress" Section "ServerLayout" Identifier "Multihead Layout" Screen "Screen0" Screen "Screen1" LeftOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "type1" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbLayout" "gb" Option "XkbModel" "pc105euro" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" Option "Buttons" "5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "FujitsuSiemens" ModelName "S7010" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "IBM" ModelName "T74A" HorizSync 30-82 VertRefresh 56-76 Option "DPMS" EndSection Section "Device" Identifier "Videocard0" Driver "i810" BusID "PCI:0:2:0" Option "MonitorLayout" "CRT,LFP" Screen 0 EndSection Section "Device" Identifier "Videocard1" Driver "i810" BusID "PCI:0:2:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1024x768" EndSubSection EndSection --n8g4imXOkfNTN/H1-- From owner-freebsd-x11@FreeBSD.ORG Fri Apr 21 10:04:39 2006 Return-Path: X-Original-To: x11@freebsd.org Delivered-To: freebsd-x11@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 209F216A402 for ; Fri, 21 Apr 2006 10:04:39 +0000 (UTC) (envelope-from fenner+portsurvey@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8D18943D5D for ; Fri, 21 Apr 2006 10:04:37 +0000 (GMT) (envelope-from fenner+portsurvey@FreeBSD.org) Received: from freefall.freebsd.org (fenner@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k3LA4bNZ047433 for ; Fri, 21 Apr 2006 10:04:37 GMT (envelope-from fenner+portsurvey@freefall.freebsd.org) Received: (from fenner@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k3LA4b5F047432; Fri, 21 Apr 2006 10:04:37 GMT (envelope-from fenner+portsurvey) Date: Fri, 21 Apr 2006 10:04:37 GMT Message-Id: <200604211004.k3LA4b5F047432@freefall.freebsd.org> From: fenner@freebsd.org (Bill "distfiles" Fenner) To: x11@freebsd.org Cc: Subject: FreeBSD ports: 1 unfetchable distfile: x11-servers/xorg-server-snap X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: ports@freebsd.org List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Apr 2006 10:04:39 -0000 Dear x11@freebsd.org, You are listed as the FreeBSD port maintainer for 1 port whose distfiles are not fetchable from their MASTER_SITES. Could you please visit http://people.freebsd.org/~fenner/portsurvey/x11@freebsd.org.html and correct the problems listed there? The individual port with a problem is x11-servers/xorg-server-snap. If you have already corrected the problems and submitted a PR, please accept my thanks and apologies for the delay in getting the fixes into the tree. This reminder is created automatically and does not (yet) have a way to know if a PR fixing the problem has been submitted. Please do *NOT* send your response to me directly; I do not necessarily have time to commit your fix; please instead submit a PR via 'send-pr' so it doesn't get lost. Problems are usually of two types: 1. The software package has been upgraded and the version in the port has been removed. The best solution to this problem is to upgrade the port to the most current version of the software package. If you are a FreeBSD committer, then you can just upgrade the port directly. If not, you should create the updated port on your own machine, test it (and maybe even run "portlint" on it), and then use "send-pr" to submit a "diff -uNr old-port updated-port". If you added or deleted any files, please make an explicit note of it. 2. The mirror site being used no longer contains the software package in question, or no longer exists. Solutions include: a) If there are other mirror sites, just remove the bad site from the list. (Make sure that what appears to be a bad site isn't actually a problem of type 1, upgrade) b) If the README or other support files in the software documentation mention where to get the software package, use one of those sites. c) Use a search engine to find another place to get the original DISTFILES. Make sure that you don't pick a FreeBSD distfiles mirror -- if you can't find any other places where the file exists, it can be a LOCAL_PORT or you can simply comment out the MASTER_SITES= line, with a comment explaining why. Once you have a solution, use "send-pr" to submit a "diff -u" of the Makefile. Note that this isn't an urgent issue, as people who try to build the port now will just fall back to the FreeBSD distfiles mirror. Please just put it on your list to do and get to it when you have time. These messages will continue to arrive twice a month until the fix is committed, as a reminder. Thanks, Bill "distfiles" Fenner. From owner-freebsd-x11@FreeBSD.ORG Sat Apr 22 23:49:29 2006 Return-Path: X-Original-To: x11@FreeBSD.org Delivered-To: freebsd-x11@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 69B2B16A401; Sat, 22 Apr 2006 23:49:29 +0000 (UTC) (envelope-from kris@8ball.rtp.FreeBSD.org) Received: from triangle.rtp.FreeBSD.Org (triangle.rtp.FreeBSD.org [192.58.184.34]) by mx1.FreeBSD.org (Postfix) with ESMTP id 09AD943D45; Sat, 22 Apr 2006 23:49:28 +0000 (GMT) (envelope-from kris@8ball.rtp.FreeBSD.org) Received: from 8ball.rtp.FreeBSD.org (8ball.rtp.FreeBSD.Org [172.21.1.5]) by triangle.rtp.FreeBSD.Org (8.13.1/8.13.1) with ESMTP id k3MNnSTY065431; Sat, 22 Apr 2006 19:49:28 -0400 (EDT) (envelope-from kris@8ball.rtp.FreeBSD.org) Received: (from kris@localhost) by 8ball.rtp.FreeBSD.org (8.13.3/8.13.3/Submit) id k3MMIUmx033168; Sat, 22 Apr 2006 18:18:30 -0400 (EDT) (envelope-from kris) Date: Sat, 22 Apr 2006 18:18:30 -0400 (EDT) From: Kris Kennaway Message-Id: <200604222218.k3MMIUmx033168@8ball.rtp.FreeBSD.org> To: anholt@FreeBSD.org, bacon@smithers.neuro.mcw.edu, ko@irfu.se, ports@FreeBSD.org, x11@FreeBSD.org Cc: Subject: Ports with duplicate LATEST_LINKS X-BeenThere: freebsd-x11@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: X11 on FreeBSD -- maintaining and support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 22 Apr 2006 23:49:29 -0000 Dear port maintainers, The following list includes ports maintained by you that have duplicate LATEST_LINK values. They should either be modified to use a unique LATEST_LINK or suppressed using NO_LATEST_LINK, to avoid overwriting each other in the packages/Latest directory. If your ports conflict with ports maintained by another person, please coordinate your efforts with them. Thanks, Kris "Annoying Reminder Guy II" Kennaway LATEST_LINK PORTNAME MAINTAINER ========================================================================== git devel/git anholt@FreeBSD.org git misc/git ports@FreeBSD.org imake devel/imake-4 x11@FreeBSD.org imake devel/imake-6 x11@FreeBSD.org vtk math/vtk43 bacon@smithers.neuro.mcw.edu vtk math/vtk ko@irfu.se Total: 6 ports