Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 15 Nov 2008 19:57:46 -0600
From:      eculp <eculp@encontacto.net>
To:        FreeBSD-multimedia@FreeBSD.org
Subject:   with USB2 in Current where should I start to get the crystal eye camara in my laptop working?
Message-ID:  <20081115195746.16765x51ku07yw4k@econet.encontacto.net>

next in thread | raw e-mail | index | archive | help
I'm running up to date (today's cvsup and build) and would like to try =20
and get the crystal eye camara in my acer aspire laptop working.

Information:

# uname -a
FreeBSD ed.local.net.mx 8.0-CURRENT FreeBSD 8.0-CURRENT #79: Sat Nov =20
15 06:42:19 CST 2008     =20
root@ed.local.net.mx:/usr/obj/usr/src/sys/ENCONTACTO  i386

On a verbose boot the only reference that I find in the dmesg is:

ugen0: <SuYin Acer CrystalEye webcam, class 239/2, rev 2.00/1.00, addr =20
2> on uhub1

# usbdevs -v -l
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), =20
nVidia(0x0000), rev 1.00
   uhub0
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
  port 5 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), =20
nVidia(0x0000), rev 1.00
   uhub1
  port 1 powered
  port 2 powered
  port 3 addr 2: high speed, power 500 mA, config 1, Acer CrystalEye =20
webcam(0xa101), SuYin(0x064e), rev 1.00
    ugen0
  port 4 powered
  port 5 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), =20
nVidia(0x0000), rev 1.00
   uhub2
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
  port 5 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), =20
nVidia(0x0000), rev 1.00
   uhub3
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
  port 5 powered

I've installed the following kernel modules and tried each but without =20
any luck.

pwc_load=3D"YES"
gspca_load=3D"YES"
ov511_load=3D"YES"

I think basically all Acer laptops have this camera now, hopefully =20
someone has some suggestions.

Thanks,

ed



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081115195746.16765x51ku07yw4k>