Date: Sun, 3 May 2009 09:06:26 +0800 From: "joejoe" <joejoe@inbsd.com> To: <freebsd-hardware@freebsd.org>, "'freebsd-scsi@freebsd.org.'" Subject: SAS HD not detected on LSI SAS1078 (Acer Altos R520) controller Message-ID: <AF27702CA2F4407EAD040D55764EF77A@yz.local>
next in thread | raw e-mail | index | archive | help
Hi everyone. I use FreeBSD 7.2 RC and 6.4 Release i386 on Acer Altos R520 with a=20 SAS HD 146G (not use SW Raid) Acer Altos R520 SAS controller is LSI SAS1078 ,=20 I checked the manual which is being supported on 2007 Aug, But I can=E2=80=99t detected on System, I try to replace the use of older versions of the R520(SAS controller is = LSI SAS1068) The SAS HD can detected, I try install system and upgrade to 6.4 Stable and make world and kernel Will swap hd to the new version of the R520(SAS controller is LSI = SAS1078) The SAS HD can=E2=80=99t detected. Anyone who can help ? The following information is to install Vmware ESX when I see the Kernel = Message scsi0 : vsd scsi1 : ata_piix scsi2 : ata_piix scsi3 : mptscsi_2xx Vendor: SEAGATE Model: ST9146802SS Rev: 0003 Type: Direct-Access ANSI SCSI revision: 05 VMWARE SCSI Id: Supported VPD pages for sda : 0x0 0x80 0x82 0x83 0xc0 = 0xc1 0xc\ 2 0xc3 0xd1 0xd2 VMWARE SCSI Id: Device id info for sda: 0x1 0x3 0x0 0x8 0x50 0x0 0xc5 = 0x0 0xf \ 0x1e 0xf8 0x6f 0x61 0x93 0x0 0x8 0x50 0x0 0xc5 0x0 0xf 0x1e 0xf8 0x6d = 0x61 0x9\ 4 0x0 0x4 0x0 0x0 0x0 0x1 0x61 0xa3 0x0 0x8 0x50 0x0 0xc5 0x0 0xf 0x1e = 0xf8 0x\ 6c 0x63 0xa8 0x0 0x18 0x6e 0x61 0x61 0x2e 0x35 0x30 0x30 0x30 0x43 0x35 = 0x30 0\ x30 0x30 0x46 0x31 0x45 0x46 0x38 0x36 0x43 0x0 0x0 0x0 0x0 VMWARE SCSI Id: Id for sda 0x50 0x00 0xc5 0x00 0x0f 0x1e 0xf8 0x6f 0x53 = 0x54 0\ x39 0x31 0x34 0x36 VMWARE: Unique Device attached as scsi disk sda at scsi3, channel 0, id = 1, lun 0 Attached scsi disk sda at scsi3, channel 0, id 1, lun 0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AF27702CA2F4407EAD040D55764EF77A>