Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 26 Oct 2009 09:55:15 -0400
From:      Steve Polyack <korvus@comcast.net>
To:        Alexander Motin <mav@FreeBSD.org>
Cc:        freebsd-stable <freebsd-stable@FreeBSD.org>, freebsd-hardware@freebsd.org
Subject:   Re: FreeBSD and SATA Port Multipliers
Message-ID:  <4AE5AA43.7030405@comcast.net>
In-Reply-To: <4AE099D8.5060103@FreeBSD.org>
References:  <4AE04F73.1050703@comcast.net> <4AE073CF.40500@comcast.net> <4AE099D8.5060103@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------070703010804050102070907
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Alexander Motin wrote:
> Steve Polyack wrote:
>   
>> Alexander Motin wrote:
>>     
>>> You can try this patch against today's HEAD:
>>> http://people.freebsd.org/~mav/cam-ata.20091022.patch
>>>   
>>>       
>> I tried the patch this morning against a fresh checkout of HEAD. 
>> Immediately after boot only one device per PM was detected (I have two
>> hooked up at the moment, 5 drives on one, 1 on the other).  However,
>> about two minutes later all of the drives showed up!
>>
>> camcontrol also rescans the entire bus *very* quickly now, and discovers
>> all changes (new/missing disks and port multipliers).
>>
>> Here's some verbose info from /var/log/messages immediately after boot:
>> Oct 22 10:52:03 lovepod kernel: siisch0: Timeout on slot 27
>> Oct 22 10:52:03 lovepod kernel: siisch0: siis_timeout is 00000000 ss
>> 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset...
>> Oct 22 10:52:03 lovepod kernel: siisch0: ready wait time=1ms
>> Oct 22 10:52:03 lovepod kernel: siisch0: hardware reset ...
>> Oct 22 10:52:03 lovepod kernel: siisch0: SATA connect timeout
>> status=00000001
>> Oct 22 10:52:03 lovepod kernel: siisch0: SIIS reset done: phy reset
>> found no device
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Command timed out
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): error 5
>> Oct 22 10:52:03 lovepod kernel: (aprobe0:siisch0:0:1:0): Retries Exhausted
>> Oct 22 10:52:03 lovepod kernel: siisch0: DISCONNECT requested
>>     
>
> What was before that? Can you send me full verbose boot messages?
>
>   
Here's a full dmesg from today using the 10/22/2009 head and patch.  It 
actually failed to detect all but one of 6 drives this time.  I'm about 
to try today's head and patch.  I'll let you know how it goes.


--------------070703010804050102070907
Content-Type: text/plain;
 name="dmesg.20091022patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.20091022patch"

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #2: Thu Oct 22 10:34:44 EDT 2009
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809e7000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff809e7260.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2133421704 Hz
CPU: Intel(R) Xeon(R) CPU           E5506  @ 2.13GHz (2133.42-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4299161600 (4100 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000093fff, 602112 bytes (147 pages)
0x0000000000a16000 - 0x00000000b60fffff, 3043926016 bytes (743146 pages)
0x00000000bf78e000 - 0x00000000bf78ffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4095377408 (3905 MB)
ACPI APIC Table: <061909 APIC1420>
INTR: Adding local APIC 18 as a target
INTR: Adding local APIC 20 as a target
INTR: Adding local APIC 22 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 18
 cpu2 (AP): APIC ID: 20
 cpu3 (AP): APIC ID: 22
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa710 00024 (v2 ACPIAM)
ACPI: XSDT 0xbf790100 0008C (v1 NEC             20090619 MSFT 00000097)
ACPI: FACP 0xbf790290 000F4 (v4 061909 FACP1420 20090619 MSFT 00000097)
ACPI: DSDT 0xbf790670 05B8F (v2  10006 10006000 00000000 INTL 20051117)
ACPI: FACS 0xbf79e000 00040
ACPI: APIC 0xbf790390 000D2 (v2 061909 APIC1420 20090619 MSFT 00000097)
ACPI: MCFG 0xbf790470 0003C (v1 061909 OEMMCFG  20090619 MSFT 00000097)
ACPI: SLIC 0xbf7904b0 00176 (v1 NEC             20090619 MSFT 00000097)
ACPI: ERST 0xbf790630 00040 (v1 061909 WHEA1420 20090619 MSFT 00000097)
ACPI: OEMB 0xbf79e040 0007B (v1 061909 OEMB1420 20090619 MSFT 00000097)
ACPI: HPET 0xbf79a670 00038 (v1 061909 OEMHPET  20090619 MSFT 00000097)
ACPI: DMAR 0xbf79e0c0 00120 (v1    AMI  OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0xbf79efb0 00363 (v1 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: EINJ 0xbf79a6b0 00130 (v1  AMIER AMI_EINJ 20090619 MSFT 00000097)
ACPI: BERT 0xbf79a840 00030 (v1  AMIER AMI_BERT 20090619 MSFT 00000097)
ACPI: ERST 0xbf79a870 001B0 (v1  AMIER AMI_ERST 20090619 MSFT 00000097)
ACPI: HEST 0xbf79aa20 000A8 (v1  AMIER AMI_HEST 20090619 MSFT 00000097)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x10000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
acpi0: <NEC > on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
ACPI timer: 1/2 1/2 1/1 1/0 1/0 1/2 1/0 1/0 1/1 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    6   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    6   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3403, revid=0x13
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3408, revid=0x13
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340a, revid=0x13
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x340e, revid=0x13
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x3410, revid=0x13
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 2 messages, vector masks
found->	vendor=0x8086, dev=0x342e, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3422, revid=0x13
	domain=0, bus=0, slot=20, func=1
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3423, revid=0x13
	domain=0, bus=0, slot=20, func=2
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3438, revid=0x13
	domain=0, bus=0, slot=20, func=3
	class=08-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3430, revid=0x13
	domain=0, bus=0, slot=22, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacfc000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3431, revid=0x13
	domain=0, bus=0, slot=22, func=1
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3432, revid=0x13
	domain=0, bus=0, slot=22, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3433, revid=0x13
	domain=0, bus=0, slot=22, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacf0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3429, revid=0x13
	domain=0, bus=0, slot=22, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfacec000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x342a, revid=0x13
	domain=0, bus=0, slot=22, func=5
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface8000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x342b, revid=0x13
	domain=0, bus=0, slot=22, func=6
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface4000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x342c, revid=0x13
	domain=0, bus=0, slot=22, func=7
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xface0000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=14
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacde000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacde000
found->	vendor=0x8086, dev=0x3a3e, revid=0x00
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=6
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfacd8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a4a, revid=0x00
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacdc000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfacdc000
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a16, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a22, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=14
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xac00, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa880, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
	map[24]: type Memory, range 32, base 0xfacd2000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[10]: type Memory, range 64, base 0xfacd0000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   4
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xfad00000-0xfadfffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x12d8, dev=0xe111, revid=0x02
	domain=0, bus=3, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xc000-0xcfff
pcib4:   memory decode     0xfad00000-0xfadfffff
pcib4:   no prefetched decode
pci4: <PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x1095, dev=0x3124, revid=0x01
	domain=0, bus=4, slot=4, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x01df, statreg=0x02b0, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfadfe000, size  7, enabled
pcib4: requested memory range 0xfadfe000-0xfadfe07f: good
pcib3: requested memory range 0xfadfe000-0xfadfe07f: good
	map[18]: type Memory, range 64, base 0xfadf0000, size 15, enabled
pcib4: requested memory range 0xfadf0000-0xfadf7fff: good
pcib3: requested memory range 0xfadf0000-0xfadf7fff: good
	map[20]: type I/O Port, range 32, base 0xcc00, size  4, enabled
pcib4: requested I/O range 0xcc00-0xcc0f: in range
pcib3: requested I/O range 0xcc00-0xcc0f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 4 INTA is routed to irq 16
siis0: <SiI3124 SATA2 controller> port 0xcc00-0xcc0f mem 0xfadfe000-0xfadfe07f,0xfadf0000-0xfadf7fff irq 16 at device 4.0 on pci4
siis0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfadfe000
siis0: Reserved 0x8000 bytes for rid 0x18 type 3 at 0xfadf0000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 49
siis0: [MPSAFE]
siis0: [ITHREAD]
siisch0: <SIIS channel> at channel 0 on siis0
siisch0: [MPSAFE]
siisch0: [ITHREAD]
siisch1: <SIIS channel> at channel 1 on siis0
siisch1: [MPSAFE]
siisch1: [ITHREAD]
siisch2: <SIIS channel> at channel 2 on siis0
siisch2: [MPSAFE]
siisch2: [ITHREAD]
siisch3: <SIIS channel> at channel 3 on siis0
siisch3: [MPSAFE]
siisch3: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb880
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 16 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacde000-0xfacde3ff irq 18 at device 26.7 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 52
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xd000-0xdfff
pcib7:   memory decode     0xfae00000-0xfaefffff
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfaee0000, size 17, enabled
pcib7: requested memory range 0xfaee0000-0xfaefffff: good
	map[18]: type I/O Port, range 32, base 0xdc00, size  5, enabled
pcib7: requested I/O range 0xdc00-0xdc1f: in range
	map[1c]: type Memory, range 32, base 0xfaedc000, size 14, enabled
pcib7: requested memory range 0xfaedc000-0xfaedffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem 0xfaee0000-0xfaefffff,0xfaedc000-0xfaedffff irq 16 at device 0.0 on pci7
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfaee0000
em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfaedc000
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 256 to local APIC 16 vector 53
msi: routing MSI-X IRQ 257 to local APIC 16 vector 54
msi: routing MSI-X IRQ 258 to local APIC 16 vector 55
em0: using IRQs 256-258 for MSI-X
em0: Using MSIX interrupts
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: [MPSAFE]
em0: [ITHREAD]
em0: bpf attached
em0: Ethernet address: 00:30:48:db:7d:9e
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib8:   domain            0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0xe000-0xefff
pcib8:   memory decode     0xfaf00000-0xfaffffff
pcib8:   no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=8, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfafe0000, size 17, enabled
pcib8: requested memory range 0xfafe0000-0xfaffffff: good
	map[18]: type I/O Port, range 32, base 0xec00, size  5, enabled
pcib8: requested I/O range 0xec00-0xec1f: in range
	map[1c]: type Memory, range 32, base 0xfafdc000, size 14, enabled
pcib8: requested memory range 0xfafdc000-0xfafdffff: good
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xec00-0xec1f mem 0xfafe0000-0xfaffffff,0xfafdc000-0xfafdffff irq 17 at device 0.0 on pci8
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfafe0000
em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfafdc000
em1: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 259 to local APIC 16 vector 56
msi: routing MSI-X IRQ 260 to local APIC 16 vector 57
msi: routing MSI-X IRQ 261 to local APIC 16 vector 58
em1: using IRQs 259-261 for MSI-X
em1: Using MSIX interrupts
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: [MPSAFE]
em1: [ITHREAD]
em1: bpf attached
em1: Ethernet address: 00:30:48:db:7d:9f
uhci3: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb480
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x3f00
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacdc000-0xfacdc3ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     9
pcib9:   subordinate bus   9
pcib9:   I/O decode        0xf000-0xfff
pcib9:   memory decode     0xfb000000-0xfbefffff
pcib9:   prefetched decode 0xf9000000-0xf9ffffff
pcib9:   Subtractively decoded bridge.
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
found->	vendor=0x102b, dev=0x0532, revid=0x0a
	domain=0, bus=9, slot=1, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=64 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=15
	powerspec 1  supports D0 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled
pcib9: requested memory range 0xf9000000-0xf9ffffff: good
	map[14]: type Memory, range 32, base 0xfbefc000, size 14, enabled
pcib9: requested memory range 0xfbefc000-0xfbefffff: good
	map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib9: requested memory range 0xfb000000-0xfb7fffff: good
pcib9: matched entry for 9.1.INTA
pcib9: slot 1 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa49f mem 0xfacd2000-0xfacd27ff irq 19 at device 31.2 on pci0
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfacd2000
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 262 to local APIC 16 vector 64
ahci0: using IRQ 262 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [MPSAFE]
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [MPSAFE]
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000)
Exiting int 0x15 (ax=0x0000 bx=0xe712 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 60
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 62
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 6B (20091013/tbutils-354)
ACPI: SSDT 0xbf79e1e0 008F0 (v1 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 0xbf79ead0 004D5 (v1  PmRef  P001Cst 00003001 INTL 20051117)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (15, 16)
est0: Invalid freq 2000, ignored.
est0: Invalid id16 (set, cur) = (14, 16)
est0: Invalid freq 1867, ignored.
est0: Invalid id16 (set, cur) = (13, 16)
est0: Invalid freq 1733, ignored.
est0: Invalid id16 (set, cur) = (12, 16)
est0: Invalid freq 1600, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (15, 16)
est1: Invalid freq 2000, ignored.
est1: Invalid id16 (set, cur) = (14, 16)
est1: Invalid freq 1867, ignored.
est1: Invalid id16 (set, cur) = (13, 16)
est1: Invalid freq 1733, ignored.
est1: Invalid id16 (set, cur) = (12, 16)
est1: Invalid freq 1600, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (15, 16)
est2: Invalid freq 2000, ignored.
est2: Invalid id16 (set, cur) = (14, 16)
est2: Invalid freq 1867, ignored.
est2: Invalid id16 (set, cur) = (13, 16)
est2: Invalid freq 1733, ignored.
est2: Invalid id16 (set, cur) = (12, 16)
est2: Invalid freq 1600, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (15, 16)
est3: Invalid freq 2000, ignored.
est3: Invalid id16 (set, cur) = (14, 16)
est3: Invalid freq 1867, ignored.
est3: Invalid id16 (set, cur) = (13, 16)
est3: Invalid freq 1733, ignored.
est3: Invalid id16 (set, cur) = (12, 16)
est3: Invalid freq 1600, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi0: wakeup code va 0xffffff8077774000 pa 0x4000
isa_probe_children: disabling PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257519 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669427 hz
Timecounter "TSC" frequency 2133421704 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attachedsiisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch2: CONNECT requested
siisch2: SIIS reset...
siisch2: ready wait time=1ms
siisch2: hardware reset ...
siisch2: SATA connect time=0ms status=00000123
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001

Waiting 15 seconds for SCSI devices to settle
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch1: SIIS reset...
siisch1: ready wait time=1ms
siisch1: hardware reset ...
siisch1: SATA connect timeout status=00000000
siisch1: SIIS reset done: phy reset found no device
siisch2: SIIS reset...
siisch2: ready wait time=1ms
siisch2: hardware reset ...
siisch2: SATA connect time=0ms status=00000123
siisch2: ready wait time=0ms
siisch2: SIIS reset done: devices=00000001
siisch3: SIIS reset...
siisch3: ready wait time=1ms
siisch3: hardware reset ...
siisch3: SATA connect timeout status=00000000
siisch3: SIIS reset done: phy reset found no device
ahcich0: AHCI reset...
ahcich0: hardware reset ...
ahcich0: SATA connect timeout status=00000000
ahcich0: AHCI reset done: phy reset found no device
ahcich1: AHCI reset...
ahcich1: hardware reset ...
ahcich1: SATA connect time=0ms status=00000123
ahcich1: ready wait time=4ms
ahcich1: AHCI reset done: device found
ahcich2: AHCI reset...
ahcich2: hardware reset ...
ahcich2: SATA connect timeout status=00000000
ahcich2: AHCI reset done: phy reset found no device
ahcich3: AHCI reset...
ahcich3: hardware reset ...
ahcich3: SATA connect timeout status=00000000
ahcich3: AHCI reset done: phy reset found no device
ahcich4: AHCI reset...
ahcich4: hardware reset ...
ahcich4: SATA connect timeout status=00000000
ahcich4: AHCI reset done: phy reset found no device
ahcich5: AHCI reset...
ahcich5: hardware reset ...
ahcich5: SATA connect timeout status=00000000
ahcich5: AHCI reset done: phy reset found no device
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Winbond Electronics Corp> at usbus1
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
(aprobe0:siisch0:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe2:siisch2:0:15:0): SIGNATURE: 9669
PM Product ID: 37261095
PM Revision: 00001706
(aprobe5:ahcich1:0:0:0): SIGNATURE: 0000
pmp0 at siisch0 bus 0 scbus0 target 15 lun 0
pmp0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pmp0: 300.000MB/s transfers
PM ports: 5
PM RESET 0
PM RESET 1
PM RESET 2
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM RESET 3
PM RESET 4
siisch0: SNTF 0x0000
siisch0: SNTF 0x0000
PM reset done
pmp1 at siisch2 bus 0 scbus2 target 15 lun 0
pmp1: <Port Multiplier 37261095 1706> ATA/ATAPI-0PM connect done
 devicePM status: 0 - 00000123

pmp1: 300.000MB/s transfersPM status: 1 - 00000123
PM status: 2 - 00000123

PM status: 3 - 00000123
PM ports: 5
PM status: 4 - 00000123
PM RESET 0
PM RESET 1
PM RESET 2
PM RESET 3
PM RESET 4
PM reset done
ada0 at PM connect done
GEOM: new disk ada0PM status: 0 - 00000123

ahcich1 bus 0 scbus5 target 0 lun 0
ada0: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
ada0: Serial Number 9VM1RYE5
ada0: 300.000MB/s transfers
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing enabled
pass0 at siisch0 bus 0 scbus0 target 15 lun 0
pass0: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass0: 30GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
0.000MB/s transfersPM status: 1 - 00000000
PM status: 2 - 00000000
PM status: 3 - 00000000

PM status: 4 - 00000000
pass1 at siisch2 bus 0 scbus2 target 15 lun 0
pass1: <Port Multiplier 37261095 1706> ATA/ATAPI-0 device
pass1: 300.000MB/s transfers
pass2 at ahcich1 bus 0 scbus5 target 0 lun 0
pass2: <ST3320418AS CC35> ATA/ATAPI-8 SATA 2.x device
pass2: Serial Number 9VM1RYE5
pass2: 300.000MB/s transfers
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x12000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x14000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x16000000   VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 18 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 20 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 22 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 18 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 20 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 22 vector 49
msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 22 vector 50
msi: Assigning MSI-X IRQ 260 to local APIC 18 vector 51
msi: Assigning MSI-X IRQ 261 to local APIC 20 vector 51
msi: Assigning MSI IRQ 262 to local APIC 22 vector 51
(aprobe1:siisch2:0:0:0): SIGNATURE: 0000
pass3 at siisch2 bus 0 scbus2 target 0 lun 0
pass3: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
pass3: Serial Number 9VS2FGFN
pass3: 300.000MB/s transfers
ada1 at siisch2 bus 0 scbus2 target 0 lun 0
ada1: <ST31500341AS CC1H> ATA/ATAPI-8 SATA 2.x device
ada1: Serial Number 9VS2FGFN
ada1: 300.000MB/s transfers
ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada1: Native Command Queueing enabled
GEOM: new disk ada1
Trying to mount root from ufs:/dev/label/OS/rootfs
ct_to_ts([2009-10-26 09:41:15]) = 1256550075.000000000
start_init: trying /sbin/init
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
siisch0: Timeout on slot 26
siisch0: siis_timeout is 00000000 ss 04000000 rs 04000000 es 00000000 sts 801a2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(aprobe0:siisch0:0:0:0): Command timed out
(aprobe0:siisch0:0:0:0): error 5
(aprobe0:siisch0:0:0:0): Retries Exhausted
siisch0: Timeout on slot 27
siisch0: siis_timeout is 00000000 ss 08000000 rs 08000000 es 00000000 sts 801b2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:1:0): Command timed out
(aprobe0:siisch0:0:1:0): error 5
(aprobe0:siisch0:0:1:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 28
siisch0: siis_timeout is 00000000 ss 10000000 rs 10000000 es 00000000 sts 801c2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:2:0): Command timed out
(aprobe0:siisch0:0:2:0): error 5
(aprobe0:siisch0:0:2:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 29
siisch0: siis_timeout is 00000000 ss 20000000 rs 20000000 es 00000000 sts 801d2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:3:0): Command timed out
(aprobe0:siisch0:0:3:0): error 5
(aprobe0:siisch0:0:3:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
siisch0: Timeout on slot 30
siisch0: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 sts 801e2000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect timeout status=00000001
siisch0: SIIS reset done: phy reset found no device
(aprobe0:siisch0:0:4:0): Command timed out
(aprobe0:siisch0:0:4:0): error 5
(aprobe0:siisch0:0:4:0): Retries Exhausted
siisch0: DISCONNECT requested
siisch0: CONNECT requested
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
PMP freeze: 0
PMP freeze: 1
PMP freeze: 2
PMP freeze: 3
PMP freeze: 4
siisch0: Timeout on slot 0
siisch0: siis_timeout is 00000000 ss 00000001 rs 00000001 es 00000000 sts 80002000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(pmp0:siisch0:0:15:0): Command timed out
(pmp0:siisch0:0:15:0): Retrying Command
siisch0: Timeout on slot 1
siisch0: siis_timeout is 00000000 ss 00000002 rs 00000002 es 00000000 sts 80012000 serr 00000000
siisch0: ready wait time=1ms
siisch0: ready wait time=1ms
siisch0: SIIS reset...
siisch0: ready wait time=1ms
siisch0: hardware reset ...
siisch0: SATA connect time=0ms status=00000123
siisch0: ready wait time=0ms
siisch0: SIIS reset done: devices=00000001
(pmp0:siisch0:0:15:0): Command timed out
(pmp0:siisch0:0:15:0): error 5
(pmp0:siisch0:0:15:0): Retries Exhausted
PMP release: 0
PMP release: 1
PMP release: 2
PMP release: 3
PMP release: 4

--------------070703010804050102070907--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AE5AA43.7030405>