Date: Mon, 03 May 2010 05:12:15 +0400 From: newuse@qip.ru To: John Baldwin <jhb@freebsd.org> Cc: freebsd-acpi@FreeBSD.org Subject: Re: Re: Power OFF button on very old motherboard with FreeBSD 7.2 Message-ID: <3f9f8adcca03275eee26921bc0d57aefc4d52f2a@mail.qip.ru>
next in thread | raw e-mail | index | archive | help
Hallow, I am new in any mailing lists and I unfortunately don't know how= to post as a followup :((=0ABut ther is an error in dump:=0A# acpidump= -t=0Aacpidump: Can't find ACPI information=0A=0AI think it is because t= he dump is not supported by my kernel :(=0A=0A=0AOn Friday 30 April 2010= 2:22:09 pm newuse@qip.ru wrote:=0A> Can you try booting with 'hint.apic= .0.disabled=3D1' set in loader.conf? Also, =0A> if you could obtain a f= ull dmesg that would be helpful.=0A=0ACan you please get the output of a= cpidump -t and post it to the mailing list =0Aas a followup?=0A=0A> --= =0A> John Baldwin=0A> =0A> Thank you, I add "hint.apic.0.disabled=3D1"= (without "") to the end of =0Aloader.conf, now it looks like:=0A> acpi= _load=3D"YES"=0A> apm_load=3D"YES"=0A> alias_ftp_load=3D"YES"=0A> hint.a= pic.0.disabled=3D1=0A> =0A> my fulll DMESG:=0A> # dmesg=0A> Copyright (c= ) 1992-2009 The FreeBSD Project.=0A> Copyright (c) 1979, 1980, 1983, 198= 6, 1988, 1989, 1991, 1992, 1993, 1994=0A> The Regents of the Uni= versity of California. All rights reserved.=0A> FreeBSD is a registered= trademark of The FreeBSD Foundation.=0A> FreeBSD 7.2-RELEASE #10: Thu M= ar 25 05:42:27 MSK 2010=0A> root@NewUse.vesnet.net:/usr/obj/usr/src/= sys/MYKNL=0A> Timecounter "i8254" frequency 1193182 Hz quality 0=0A> CPU= : Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)=0A> Or= igin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2=0A> Features=3D0= x183f9ff=0A> real memory =3D 134217728 (128 MB)=0A> avail memory =3D 12= 1806848 (116 MB)=0A> kbd1 at kbdmux0=0A> ACPI Error (tbxfroot-0308): A v= alid RSDP was not found [20070320]=0A> ACPI: Table initialisation failed= : AE_NOT_FOUND=0A> ACPI: Try disabling either ACPI or apic support.=0A>= pcib0: pcibus 0 on motherboard=0A> pir0: on motherboard=0A> pci0: on= pcib0=0A> agp0: on hostb0=0A> pcib1: at device 1.0 on pci0=0A> pci1:= on pcib1=0A> isab0: at device 7.0 on pci0=0A> isa0: on isab0=0A> ata= pci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device= =0A7.1 on pci0=0A> ata0: on atapci0=0A> ata0: [ITHREAD]=0A> ata1: on= atapci0=0A> ata1: [ITHREAD]=0A> uhci0: port 0xde00-0xde1f irq 11 at de= vice 7.2 on pci0=0A> uhci0: [GIANT-LOCKED]=0A> uhci0: [ITHREAD]=0A> usb0= : on uhci0=0A> usb0: USB revision 1.0=0A> uhub0: on usb0=0A> uhub0: 2= ports with 2 removable, self powered=0A> intsmb0: port 0x440-0x44f at= device 7.3 on pci0=0A> intsmb0: intr IRQ 9 enabled revision 0=0A> intsm= b0: [GIANT-LOCKED]=0A> intsmb0: [ITHREAD]=0A> intsmb0: PM I/O mapped 400= =0A> smbus0: on intsmb0=0A> smb0: on smbus0=0A> pcm0: port 0xdc00-0xd= c3f irq 11 at device 14.0 on pci0=0A> pcm0: =0A> pcm0: [ITHREAD]=0A> pcm= 0: =0A> rl0: port 0xda00-0xdaff mem 0xefffbf00-0xefffbfff irq 10 at dev= ice 16.0 on =0Apci0=0A> miibus0: on rl0=0A> rlphy0: PHY 0 on miibus0= =0A> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A> r= l0: Ethernet address: 00:80:48:38:3a:3d=0A> rl0: [ITHREAD]=0A> rl1: por= t 0xd800-0xd8ff mem 0xefffbe00-0xefffbeff irq 9 at device 18.0 on =0Apci= 0=0A> miibus1: on rl1=0A> rlphy1: PHY 0 on miibus1=0A> rlphy1: 10base= T, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A> rl1: Ethernet address= : 00:18:e7:09:0f:09=0A> rl1: [ITHREAD]=0A> rl2: port 0xd600-0xd6ff mem= 0xefffbd00-0xefffbdff irq 11 at device 20.0 on =0Apci0=0A> miibus2: on= rl2=0A> rlphy2: PHY 0 on miibus2=0A> rlphy2: 10baseT, 10baseT-FDX, 10= 0baseTX, 100baseTX-FDX, auto=0A> rl2: Ethernet address: 00:11:95:5b:8e:7= a=0A> rl2: [ITHREAD]=0A> cpu0 on motherboard=0A> pmtimer0 on isa0=0A> at= kbdc0: at port 0x60,0x64 on isa0=0A> atkbd0: irq 1 on atkbdc0=0A> kbd0= at atkbd0=0A> atkbd0: [GIANT-LOCKED]=0A> atkbd0: [ITHREAD]=0A> fdc0: a= t port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A> fdc0: [FILTER]=0A> fd0:= =0A> =0A=0A-- =0AJohn Baldwin=0A=0A
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3f9f8adcca03275eee26921bc0d57aefc4d52f2a>