From owner-freebsd-acpi@FreeBSD.ORG Mon Jun 7 11:06:49 2010 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 046F91065692 for ; Mon, 7 Jun 2010 11:06:49 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (unknown [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id CD6648FC1E for ; Mon, 7 Jun 2010 11:06:48 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o57B6m4n008548 for ; Mon, 7 Jun 2010 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o57B6mMb008546 for freebsd-acpi@FreeBSD.org; Mon, 7 Jun 2010 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 7 Jun 2010 11:06:48 GMT Message-Id: <201006071106.o57B6mMb008546@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-acpi@FreeBSD.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Jun 2010 11:06:49 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/146715 acpi [acpi] Suspend works, resume not on a HP Probook 4510s o kern/145306 acpi [acpi]: Can't change brightness on HP ProBook 4510s o bin/145063 acpi [patch] powerd(8): Add -m and -M (minimum and maximum o amd64/144551 acpi [acpi] ACPI issues on SuperMicro X7SPA-H o i386/144045 acpi [acpi] [panic] kernel trap with acpi enabled o i386/143798 acpi [acpi] shutdown problem with SiS K7S5A o kern/143420 acpi [acpi] ACPI issues with Toshiba o kern/142263 acpi [acpi] ACPI regression on Asus K8N7-E deluxe motherboa o kern/142009 acpi [acpi] [panic] Panic in AcpiNsGetAttachedObject o amd64/140751 acpi [acpi] BIOS resource allocation and FreeBSD ACPI in TO o kern/139088 acpi [acpi] ACPI Exception: AE_AML_INFINITE_LOOP error o amd64/138210 acpi [acpi] acer aspire 5536 ACPI problems (S3, brightness, o bin/137053 acpi [hang] FreeBSD 8.0 BETA2Compaq Mini 700 locks on boot o kern/137042 acpi [acpi] hp laptop's lcd not wakes up after suspend to r o i386/136008 acpi [acpi] Dell Vostro 1310 will not shutdown (Requires us o bin/135349 acpi [patch] teach acpidump(8) to disassemble arbitrary mem o kern/135070 acpi [acpi] [patch] BIOS resource allocation and FreeBSD AC o kern/132602 acpi [acpi] ACPI Problem with Intel SS4200: System does not o kern/130683 acpi [ACPI] shutdown hangs after syncing disks - ACPI race? o i386/129953 acpi [acpi] ACPI timeout (CDROM) with Shuttle X27D o kern/129618 acpi [acpi] Problem with ACPI on HP Pavilion DV2899 laptop o kern/129563 acpi [acpi] sleep broken on IBM/Lenovo T61 in amd64 mode f kern/128639 acpi [patch] [acpi_asus] acpi for ASUS A6F,A3E,A3F,A3N not f kern/128634 acpi [patch] fix acpi_asus(4) in asus a6f laptop o kern/124744 acpi [acpi] [patch] incorrect _BST result validation for To o kern/124412 acpi [acpi] power off error on Toshiba M40 laptop o kern/123039 acpi [acpi] ACPI AML_BUFFER_LIMIT errors during boot o kern/121504 acpi [patch] Correctly set hw.acpi.osname on certain machin f kern/121454 acpi [pst] Promise SuperTrak SX6000 does not load during bo o amd64/121439 acpi [boot] Installation of FreeBSD 7.0 fails: ACPI problem o kern/121102 acpi [acpi_fujitsu] [patch] update acpi_fujitsu for the P80 o kern/120515 acpi [acpi] [patch] acpi_alloc_wakeup_handler: can't alloc o kern/119356 acpi [acpi]: i386 ACPI wakeup not work due resource exhaust o kern/119200 acpi [acpi] Lid close switch suspends CPU for 1 second on H o kern/118973 acpi [acpi]: Kernel panic with acpi boot o kern/116939 acpi [acpi] PCI-to-PCI misconfigured for bus three and can o i386/114562 acpi [acpi] cardbus is dead after s3 on Thinkpad T43 with a o kern/114165 acpi [acpi] Dell C810 - ACPI problem s kern/112544 acpi [acpi] [patch] Add High Precision Event Timer Driver f o kern/108954 acpi [acpi] 'sleep(1)' sleeps >1 seconds when speedstep (Cx o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, s kern/91038 acpi [panic] [ata] [acpi] 6.0-RELEASE on Fujitsu Siemens Am s kern/90243 acpi Laptop fan doesn't turn off (ACPI enabled) (Packard Be o i386/83018 acpi [install] Installer will not boot on Asus P4S8X BIOS 1 f kern/81000 acpi [apic] Via 8235 sound card worked great with FreeBSD 5 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys s kern/73823 acpi [request] acpi / power-on by timer support o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/69750 acpi Boot without ACPI failed on ASUS L5 o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop 61 problems total. From owner-freebsd-acpi@FreeBSD.ORG Tue Jun 8 09:53:18 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DF3A61065670 for ; Tue, 8 Jun 2010 09:53:18 +0000 (UTC) (envelope-from mavbsd@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 6F2578FC15 for ; Tue, 8 Jun 2010 09:53:18 +0000 (UTC) Received: by fxm20 with SMTP id 20so3397698fxm.13 for ; Tue, 08 Jun 2010 02:53:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:sender:message-id:date:from :user-agent:mime-version:to:subject:x-enigmail-version:content-type :content-transfer-encoding; bh=7nJDRiXxLTq8PIxtAujKQy9gXF9nXYkWdEKpo+W3PNM=; b=cNttM3OvDhAXb99ws4YFUOPU8Gd9lz/qghA1Pq4WPVtu9T4IQPBFBHOEC92FwSZofu GS3A+UFTH1SzAPqUd5BIFOI5GvHoikPV+OKRjo7p1kalqpRU929C2AFQGzS2hNcllDQh 5Vvhej72G5TRcp3yyfFAcnkRBYVvvqrc5LEjk= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=sender:message-id:date:from:user-agent:mime-version:to:subject :x-enigmail-version:content-type:content-transfer-encoding; b=UUP0dW0LDoWj6NRupgmAlPMeSXgZXrBfnzT97Z1PZaSXem5JLk8ak7e0to2Dyn/tPG ogVitiGJ4BjeTBQl35GQ3AR5PqDk0g5KOKphHbHdFBf+gBRq/fyxxHYbIkI3X/uCEOR1 FlMrZ4ym3yDDGfs9L/by5CPRejvdcwccxseE0= Received: by 10.223.101.4 with SMTP id a4mr888805fao.71.1275990797365; Tue, 08 Jun 2010 02:53:17 -0700 (PDT) Received: from mavbook.mavhome.dp.ua (pc.mavhome.dp.ua [212.86.226.226]) by mx.google.com with ESMTPS id y12sm24662418faj.17.2010.06.08.02.53.15 (version=SSLv3 cipher=RC4-MD5); Tue, 08 Jun 2010 02:53:16 -0700 (PDT) Sender: Alexander Motin Message-ID: <4C0E12F6.8050600@FreeBSD.org> Date: Tue, 08 Jun 2010 12:52:54 +0300 From: Alexander Motin User-Agent: Thunderbird 2.0.0.24 (X11/20100402) MIME-Version: 1.0 To: FreeBSD acpi X-Enigmail-Version: 0.96.0 Content-Type: text/plain; charset=KOI8-R Content-Transfer-Encoding: 7bit Subject: Panic on S3 suspend call. X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Jun 2010 09:53:18 -0000 Hi. Just noted that fresh HEAD i386 system panics on suspend request when build with INVARIANTS and WITNESS: panic: mutex ACPI global lock owned at ../../../kern/kern_event.c:1899 cpuid = 1 KDB: enter: panic [ thread pid 1047 tid 100138 ] Stopped at 0x408d29df: movl $0,0x40dded34 db> bt Tracing pid 1047 tid 100138 td 0x45fcb9c0 kdb_enter(40c75fe3,40c75fe3,40c74763,7c91fb1c,1,...) at 0x408d29df panic(40c74763,40c26898,40c70d4e,76b,7c91fb40,...) at 0x4089ec96 _mtx_assert(40da08a0,0,40c70d4e,76b,7c91fb70,...) at 0x4088e227 knlist_mtx_assert_unlocked(40da08a0,4088ed2c,40da08a0,45d377c0,3,...) at 0x4086b06e knote(45d377dc,0,0,921,0,...) at 0x4086b9ff acpi_ReqSleepState(456c3700,3,40c2633d,c76,0,...) at 0x404e8f4b acpiioctl(45793400,80045004,45d07810,3,45fcb9c0,...) at 0x404e9118 devfs_ioctl_f(45d820e0,80045004,45d07810,45d34a80,45fcb9c0,...) at 0x4081d1e8 kern_ioctl(45fcb9c0,3,80045004,45d07810,91fcec,...) at 0x408ebdbd ioctl(45fcb9c0,7c91fcec,0,40cb192e,0,...) at 0x408ebf47 syscallenter(45fcb9c0,7c91fce4,40b9fa00,40dcd190,0,...) at 0x408e0b23 syscall(7c91fd28) at 0x40b9f169 Xint0x80_syscall() at 0x40b7f49a --- syscall (54, FreeBSD ELF32, ioctl), eip = 0x28183173, esp = 0x3fbfeb1c, ebp = 0x3fbfebf8 --- db> -- Alexander Motin From owner-freebsd-acpi@FreeBSD.ORG Tue Jun 8 16:24:14 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7491F1065670; Tue, 8 Jun 2010 16:24:14 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from cyrus.watson.org (cyrus.watson.org [65.122.17.42]) by mx1.freebsd.org (Postfix) with ESMTP id 47D1C8FC0A; Tue, 8 Jun 2010 16:24:14 +0000 (UTC) Received: from bigwig.baldwin.cx (66.111.2.69.static.nyinternet.net [66.111.2.69]) by cyrus.watson.org (Postfix) with ESMTPSA id EEC8746BC2; Tue, 8 Jun 2010 12:24:13 -0400 (EDT) Received: from jhbbsd.localnet (smtp.hudson-trading.com [209.249.190.9]) by bigwig.baldwin.cx (Postfix) with ESMTPA id 3765F8A01F; Tue, 8 Jun 2010 12:24:13 -0400 (EDT) From: John Baldwin To: freebsd-acpi@freebsd.org Date: Tue, 8 Jun 2010 11:39:04 -0400 User-Agent: KMail/1.12.1 (FreeBSD/7.3-CBSD-20100217; KDE/4.3.1; amd64; ; ) References: <4C0E12F6.8050600@FreeBSD.org> In-Reply-To: <4C0E12F6.8050600@FreeBSD.org> MIME-Version: 1.0 Content-Type: Text/Plain; charset="koi8-r" Content-Transfer-Encoding: 7bit Message-Id: <201006081139.04417.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.0.1 (bigwig.baldwin.cx); Tue, 08 Jun 2010 12:24:13 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at bigwig.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-2.5 required=4.2 tests=AWL,BAYES_00 autolearn=ham version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on bigwig.baldwin.cx Cc: Alexander Motin Subject: Re: Panic on S3 suspend call. X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Jun 2010 16:24:14 -0000 On Tuesday 08 June 2010 5:52:54 am Alexander Motin wrote: > Hi. > > Just noted that fresh HEAD i386 system panics on suspend request when > build with INVARIANTS and WITNESS: > > panic: mutex ACPI global lock owned at ../../../kern/kern_event.c:1899 > cpuid = 1 > KDB: enter: panic > [ thread pid 1047 tid 100138 ] > Stopped at 0x408d29df: movl $0,0x40dded34 > db> bt > Tracing pid 1047 tid 100138 td 0x45fcb9c0 > kdb_enter(40c75fe3,40c75fe3,40c74763,7c91fb1c,1,...) at 0x408d29df > panic(40c74763,40c26898,40c70d4e,76b,7c91fb40,...) at 0x4089ec96 > _mtx_assert(40da08a0,0,40c70d4e,76b,7c91fb70,...) at 0x4088e227 > knlist_mtx_assert_unlocked(40da08a0,4088ed2c,40da08a0,45d377c0,3,...) at > 0x4086b06e > knote(45d377dc,0,0,921,0,...) at 0x4086b9ff > acpi_ReqSleepState(456c3700,3,40c2633d,c76,0,...) at 0x404e8f4b I think this should fix it: Index: acpi.c =================================================================== --- acpi.c (revision 208893) +++ acpi.c (working copy) @@ -2346,7 +2346,7 @@ clone->notify_status = APM_EV_NONE; if ((clone->flags & ACPI_EVF_DEVD) == 0) { selwakeuppri(&clone->sel_read, PZERO); - KNOTE_UNLOCKED(&clone->sel_read.si_note, 0); + KNOTE_LOCKED(&clone->sel_read.si_note, 0); } } -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Tue Jun 8 21:06:17 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7AB001065677; Tue, 8 Jun 2010 21:06:17 +0000 (UTC) (envelope-from mavbsd@gmail.com) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id AE2E38FC08; Tue, 8 Jun 2010 21:06:16 +0000 (UTC) Received: by fxm20 with SMTP id 20so4023340fxm.13 for ; Tue, 08 Jun 2010 14:06:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:sender:message-id:date:from :user-agent:mime-version:to:cc:subject:references:in-reply-to :x-enigmail-version:content-type:content-transfer-encoding; bh=U6zXEjKce1rk1mOkfuTrHZZ/9yp21VlMhcIIMb/WC0M=; b=ll37ah82zY5jRIh/HVFa0znG8bHKhz7yw6VgC+QYHRRvCMxPN847LYANgRvNopQq+1 FNClxDc0lKopgYn6b/te7q16QZj38aMJ1Y3o+G49RsLXvkFqNZib69oDOpheQI4F5Gw8 AcbVuob8FO7IHZaaDFFA69JGq5ot8MrJ697SE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=sender:message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:x-enigmail-version:content-type :content-transfer-encoding; b=Wqfl53joC8enYHvInkJ5XIQzltZFmr9PuWIkuqzKV2fmXjYWq1yKa6XOi8ujcnE1X8 ffpVLCRZVCp7wIkztjbTeqmcjjtbQ9QO8oE46RWv0+RyAE05suvApy3i5/WJpWL/gYct Bx1QK6/OcYlxwNw72lgJUxzSivgPa5SbRKDLs= Received: by 10.223.56.206 with SMTP id z14mr1864121fag.97.1276031174433; Tue, 08 Jun 2010 14:06:14 -0700 (PDT) Received: from mavbook.mavhome.dp.ua (pc.mavhome.dp.ua [212.86.226.226]) by mx.google.com with ESMTPS id g10sm27246774fai.12.2010.06.08.14.06.12 (version=SSLv3 cipher=RC4-MD5); Tue, 08 Jun 2010 14:06:13 -0700 (PDT) Sender: Alexander Motin Message-ID: <4C0EB0AF.7060400@FreeBSD.org> Date: Wed, 09 Jun 2010 00:05:51 +0300 From: Alexander Motin User-Agent: Thunderbird 2.0.0.24 (X11/20100402) MIME-Version: 1.0 To: John Baldwin References: <4C0E12F6.8050600@FreeBSD.org> <201006081139.04417.jhb@freebsd.org> In-Reply-To: <201006081139.04417.jhb@freebsd.org> X-Enigmail-Version: 0.96.0 Content-Type: text/plain; charset=KOI8-R Content-Transfer-Encoding: 7bit Cc: freebsd-acpi@freebsd.org Subject: Re: Panic on S3 suspend call. X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Jun 2010 21:06:17 -0000 John Baldwin wrote: > On Tuesday 08 June 2010 5:52:54 am Alexander Motin wrote: >> Hi. >> >> Just noted that fresh HEAD i386 system panics on suspend request when >> build with INVARIANTS and WITNESS: >> >> panic: mutex ACPI global lock owned at ../../../kern/kern_event.c:1899 >> cpuid = 1 >> KDB: enter: panic >> [ thread pid 1047 tid 100138 ] >> Stopped at 0x408d29df: movl $0,0x40dded34 >> db> bt >> Tracing pid 1047 tid 100138 td 0x45fcb9c0 >> kdb_enter(40c75fe3,40c75fe3,40c74763,7c91fb1c,1,...) at 0x408d29df >> panic(40c74763,40c26898,40c70d4e,76b,7c91fb40,...) at 0x4089ec96 >> _mtx_assert(40da08a0,0,40c70d4e,76b,7c91fb70,...) at 0x4088e227 >> knlist_mtx_assert_unlocked(40da08a0,4088ed2c,40da08a0,45d377c0,3,...) at >> 0x4086b06e >> knote(45d377dc,0,0,921,0,...) at 0x4086b9ff >> acpi_ReqSleepState(456c3700,3,40c2633d,c76,0,...) at 0x404e8f4b > > I think this should fix it: > > Index: acpi.c > =================================================================== > --- acpi.c (revision 208893) > +++ acpi.c (working copy) > @@ -2346,7 +2346,7 @@ > clone->notify_status = APM_EV_NONE; > if ((clone->flags & ACPI_EVF_DEVD) == 0) { > selwakeuppri(&clone->sel_read, PZERO); > - KNOTE_UNLOCKED(&clone->sel_read.si_note, 0); > + KNOTE_LOCKED(&clone->sel_read.si_note, 0); > } > } With this patch it doesn't panics. A bit surprising, as it was written so almost three years ago. -- Alexander Motin From owner-freebsd-acpi@FreeBSD.ORG Thu Jun 10 11:45:33 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 94C8B106566C for ; Thu, 10 Jun 2010 11:45:33 +0000 (UTC) (envelope-from bounces@nabble.com) Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158]) by mx1.freebsd.org (Postfix) with ESMTP id 1BC338FC08 for ; Thu, 10 Jun 2010 11:45:32 +0000 (UTC) Received: from isper.nabble.com ([192.168.236.156]) by kuber.nabble.com with esmtp (Exim 4.63) (envelope-from ) id 1OMgCS-0004Pp-7q for freebsd-acpi@freebsd.org; Thu, 10 Jun 2010 04:45:32 -0700 Message-ID: <28841924.post@talk.nabble.com> Date: Thu, 10 Jun 2010 04:45:32 -0700 (PDT) From: subgeometer To: freebsd-acpi@freebsd.org In-Reply-To: <28616663.post@talk.nabble.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Nabble-From: biggerbumme@yahoo.co.in References: <201004122301.45040.g.veniamin@googlemail.com> <28494831.post@talk.nabble.com> <4BE94278.1010101@FreeBSD.org> <28616663.post@talk.nabble.com> Subject: Re: Problem network devices Acer Extensa 5635G X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Jun 2010 11:45:33 -0000 boot -v output for acer 5635z (sorry about the delay) Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #1: Sun May 9 23:03:50 EST 2010 root@:/usr/obj/usr/src/sys/acer5635z Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2095.00-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x400e39d AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3995230208 (3810 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard wlan: mac acl policy registered netsmb_dev: loaded kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) unknown: I/O range not supported acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 acpi_ec0: warning: EC done before starting event wait acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x1800-0x1807 mem 0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: detected 65532k stolen memory agp0: aperture size is 256M drm0: on vgapci0 info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci1: mem 0xf0400000-0xf04fffff at device 2.1 on pci0 uhci0: port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: on uhci0 uhci1: port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: on uhci1 ehci0: mem 0xf0904800-0xf0904bff irq 19 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: on ehci0 pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pci2: on pcib1 pcib2: irq 19 at device 28.3 on pci0 pci7: on pcib2 ath0: irq 19 at device 0.0 on pci7 ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). ath0: cannot map register space device_attach: ath0 attach returned 6 pcib3: irq 16 at device 28.5 on pci0 pci9: on pcib3 alc0: irq 17 at device 0.0 on pci9 alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). alc0: cannot allocate memory resources. device_attach: alc0 attach returned 6 uhci2: port 0x1860-0x187f irq 23 at device 29.0 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x003b usbus3: on uhci2 uhci3: port 0x1880-0x189f irq 19 at device 29.1 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus4: on uhci3 uhci4: port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0010 usbus5: on uhci4 uhci5: port 0x18c0-0x18df irq 16 at device 29.3 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x0010 usbus6: on uhci5 ehci1: mem 0xf0904c00-0xf0904fff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: on ehci1 pcib4: at device 30.0 on pci0 pci10: on pcib4 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf0904000-0xf09047ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: on acpi0 est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 p4tcc1: on cpu1 orm0: at iomem 0xd0000-0xd0fff,0xe0000-0xe17ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad4: 305245MB at ata2-master SATA300 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 GEOM: ad4: partition 3 does not start on a track boundary. GEOM: ad4: partition 3 does not end on a track boundary. GEOM: ad4: partition 2 does not start on a track boundary. GEOM: ad4: partition 2 does not end on a track boundary. acd0: DVDR at ata3-master SATA150 SMP: AP CPU #1 Launched! WARNING: ad4s1 expected rawoffset 0, found 63 WARNING: ad4s1a expected rawoffset 0, found 63 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus7 uhub7: 8 ports with 8 removable, self powered Root mount waiting for: usbus7 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 ugen7.2: at usbus7 umass0: on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0000 (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): Unretryable error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed umass0:2:0:-1: Attached to scbus2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 7701MB (15771759 512 byte sectors: 255H 63S/T 981C) ugen7.3: at usbus7 Trying to mount root from ufs:/dev/ad4s1a Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 0 2 0 0 0 done All buffers synced. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #1: Sun May 9 23:03:50 EST 2010 root@:/usr/obj/usr/src/sys/acer5635z Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f41000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2095002262 Hz CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2095.00-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x400e39d AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000f70000 - 0x00000000b0420fff, 2940932096 bytes (718001 pages) 0x00000000b9aa7000 - 0x00000000b9bc9fff, 1191936 bytes (291 pages) 0x00000000b9c0f000 - 0x00000000b9d08fff, 1024000 bytes (250 pages) 0x00000000b9f0f000 - 0x00000000b9f18fff, 40960 bytes (10 pages) 0x00000000b9f1f000 - 0x00000000b9f63fff, 282624 bytes (69 pages) 0x00000000b9f9f000 - 0x00000000b9fe0fff, 270336 bytes (66 pages) 0x00000000b9fff000 - 0x00000000b9ffffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 3995230208 (3810 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf7510 00024 (v2 PTLTD ) ACPI: XSDT 0xb9ff573b 00074 (v1 ACRSYS ACRPRDCT 06040000 LTP 00000000) ACPI: FACP 0xb9fe5000 000F4 (v3 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 0xb9fe6000 092A1 (v2 Intel CANTIGA 06040000 INTL 20061109) ACPI: FACS 0xb9f9efc0 00040 ACPI: HPET 0xb9ffed86 00038 (v1 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 0xb9ffedbe 0003C (v1 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: APIC 0xb9ffedfa 00068 (v1 PTLTD APIC 06040000 LTP 00000000) ACPI: BOOT 0xb9ffee62 00028 (v1 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 0xb9ffee8a 00176 (v1 ACRSYS ACRPRDCT 06040000 acer 00000000) ACPI: SSDT 0xb9ff57d7 001A6 (v1 SataRe SataAhci 00001000 INTL 20061109) ACPI: SSDT 0xb9fe4000 00655 (v1 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT 0xb9fe3000 00259 (v1 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0xb9fe2000 0020F (v1 PmRef ApTst 00003000 INTL 20061109) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> wlan: mac acl policy registered random: netsmb_dev: loaded nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: null: io: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 AcpiOsDerivePciId: \\_SB_.PCI0.PEGP.VGA_.VGA_ -> bus 0 dev 0 func 0 unknown: I/O range not supported AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 acpi_ec0: warning: EC done before starting event wait pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a40, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a42, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf0000000, size 22, enabled map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a43, revid=0x07 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf0400000, size 20, enabled found-> vendor=0x8086, dev=0x2937, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x293c, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0904800, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 19 found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf0700000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2946, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x294a, revid=0x03 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2934, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2939, revid=0x03 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x293a, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0904c00, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0x93 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2919, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2929, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x1818, size 3, enabled map[14]: type I/O Port, range 32, base 0x180c, size 2, enabled map[18]: type I/O Port, range 32, base 0x1810, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1808, size 2, enabled map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled map[24]: type Memory, range 32, base 0xf0904000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 64, base 0, size 8, enabled map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 19 vgapci0: port 0x1800-0x1807 mem 0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf0000000 agp0: detected 65532k stolen memory agp0: aperture size is 256M drm0: on vgapci0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 vgapci0: using IRQ 256 for MSI info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci1: mem 0xf0400000-0xf04fffff at device 2.1 on pci0 uhci0: port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: on uhci0 uhci1: port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: on uhci1 ehci0: mem 0xf0904800-0xf0904bff irq 19 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0904800 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: on ehci0 pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 4 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pci2: on pcib1 pci2: domain=0, physical bus=2 pcib2: irq 19 at device 28.3 on pci0 pcib2: domain 0 pcib2: secondary bus 7 pcib2: subordinate bus 7 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci7: on pcib2 pci7: domain=0, physical bus=7 found-> vendor=0x168c, dev=0x002a, revid=0x01 domain=0, bus=7, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0, size 16, memory disabled pcib2: matched entry for 7.0.INTA pcib2: slot 0 INTA hardwired to IRQ 19 ath0: irq 19 at device 0.0 on pci7 pcib2: ath0 requested unsupported memory range 0-0xffffffffffffffff (decoding 0-0, 0-0) ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). ath0: cannot map register space device_attach: ath0 attach returned 6 pcib3: irq 16 at device 28.5 on pci0 pcib3: domain 0 pcib3: secondary bus 9 pcib3: subordinate bus 9 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.RP06 - AE_NOT_FOUND pci9: on pcib3 pci9: domain=0, physical bus=9 found-> vendor=0x1969, dev=0x1063, revid=0xc0 domain=0, bus=9, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0, size 18, memory disabled map[18]: type I/O Port, range 32, base 0, size 7, port disabled pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 pcib3: slot 0 INTA is routed to irq 17 alc0: irq 17 at device 0.0 on pci9 pcib3: alc0 requested unsupported memory range 0-0xffffffffffffffff (decoding 0-0, 0-0) alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). alc0: cannot allocate memory resources. device_attach: alc0 attach returned 6 uhci2: port 0x1860-0x187f irq 23 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x003b usbus3: on uhci2 uhci3: port 0x1880-0x189f irq 19 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus4: on uhci3 uhci4: port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x0010 usbus5: on uhci4 uhci5: port 0x18c0-0x18df irq 16 at device 29.3 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0 uhci5: [MPSAFE] uhci5: [ITHREAD] uhci5: LegSup = 0x0010 usbus6: on uhci5 ehci1: mem 0xf0904c00-0xf0904fff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0904c00 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: on ehci1 pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 10 pcib4: subordinate bus 10 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci10: on pcib4 pci10: domain=0, physical bus=10 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf0904000-0xf09047ff irq 19 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf0904000 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC eSATA 4ports ata2: on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=7ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000004 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci0 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000004 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: on acpi0 ACPI: SSDT 0xb9f1aca0 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0xb9f19620 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20061109) est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 ACPI: SSDT 0xb9f1aa20 001CF (v1 PmRef ApIst 00003000 INTL 20061109) ACPI: SSDT 0xb9f1af20 0008D (v1 PmRef ApCst 00003000 INTL 20061109) est1: on cpu1 p4tcc1: on cpu1 ex_isa_identify() ahc_isa_probe 1: ioport 0x1c00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xd0000-0xd0fff,0xe0000-0xe17ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251406 -> 100000 procfs registered lapic: Divisor 2, Frequency 99762019 hz Timecounter "TSC" frequency 2095002262 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached pflog0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire acpi_acad0: acline initialization start battery0: battery initialization start ad4: 305245MB at ata2-master SATA300 ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 GEOM: ad4: partition 3 does not start on a track boundary. GEOM: ad4: partition 3 does not end on a track boundary. GEOM: ad4: partition 2 does not start on a track boundary. GEOM: ad4: partition 2 does not end on a track boundary. ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata3: device_reset timeout=380us acd0: DVDR drive at ata3 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s)WARNING: ad4s1 expected rawoffset 0, found 63 , 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 51 WARNING: ad4s1a expected rawoffset 0, found 63 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus7 uhub7: 8 ports with 8 removable, self powered Root mount waiting for: usbus7 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? ugen7.2: at usbus7 umass0: on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0000 (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed Unretryable error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error GEOM: new disk cd0pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 3.300MB/s transfers (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error umass0:2:0:-1: Attached to scbus2 pass1 at umass-sim0 bus 0 target 0 lun 0 pass1: Removable Direct Access SCSI-2 device pass1: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 7701MB (15771759 512 byte sectors: 255H 63S/T 981C) ugen7.3: at usbus7 Trying to mount root from ufs:/dev/ad4s1a ct_to_ts([2010-06-10 21:35:32]) = 1276205732.000000000 start_init: trying /sbin/init battery0: battery initialization done, tried 2 times -- View this message in context: http://old.nabble.com/Problem-network-devices-Acer-Extensa-5635G-tp28219409p28841924.html Sent from the freebsd-acpi mailing list archive at Nabble.com. From owner-freebsd-acpi@FreeBSD.ORG Fri Jun 11 12:25:01 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7E6D91065694 for ; Fri, 11 Jun 2010 12:25:01 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from cyrus.watson.org (cyrus.watson.org [65.122.17.42]) by mx1.freebsd.org (Postfix) with ESMTP id 4FBB28FC1B for ; Fri, 11 Jun 2010 12:25:01 +0000 (UTC) Received: from bigwig.baldwin.cx (66.111.2.69.static.nyinternet.net [66.111.2.69]) by cyrus.watson.org (Postfix) with ESMTPSA id E05A446B86; Fri, 11 Jun 2010 08:25:00 -0400 (EDT) Received: from jhbbsd.localnet (smtp.hudson-trading.com [209.249.190.9]) by bigwig.baldwin.cx (Postfix) with ESMTPSA id 268648A03C; Fri, 11 Jun 2010 08:25:00 -0400 (EDT) From: John Baldwin To: freebsd-acpi@freebsd.org Date: Fri, 11 Jun 2010 07:49:11 -0400 User-Agent: KMail/1.12.1 (FreeBSD/7.3-CBSD-20100217; KDE/4.3.1; amd64; ; ) References: <201004122301.45040.g.veniamin@googlemail.com> <28616663.post@talk.nabble.com> <28841924.post@talk.nabble.com> In-Reply-To: <28841924.post@talk.nabble.com> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201006110749.11669.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.0.1 (bigwig.baldwin.cx); Fri, 11 Jun 2010 08:25:00 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at bigwig.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-2.5 required=4.2 tests=AWL,BAYES_00 autolearn=ham version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on bigwig.baldwin.cx Cc: subgeometer Subject: Re: Problem network devices Acer Extensa 5635G X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Jun 2010 12:25:01 -0000 On Thursday 10 June 2010 7:45:32 am subgeometer wrote: > > boot -v output for acer 5635z (sorry about the delay) Ok, it is the PCI bridge resource issue. :( -- John Baldwin