Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 1 Apr 2012 23:04:32 +0200
From:      Hans Petter Selasky <hselasky@c2i.net>
To:        Denver Hull <denverh@comcast.net>
Cc:        freebsd-usb@freebsd.org
Subject:   Re: wacom and x11 and webcamd
Message-ID:  <201204012304.32240.hselasky@c2i.net>
In-Reply-To: <4F74D22B.9010307@comcast.net>
References:  <4F6E0101.8020806@comcast.net> <201203251005.04485.hselasky@c2i.net> <4F74D22B.9010307@comcast.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 29 March 2012 23:20:43 Denver Hull wrote:
> Hans Petter Selasky wrote:
> > On Saturday 24 March 2012 18:14:41 Denver Hull wrote:
> >> Hello,
> >> 
> >> I discovered this when I saw an update to input-wacom at
> >> freshports.org.  I've installed cuse4bsd, the new input-wacom, and the
> >> latest webcamd:
> >> cuse4bsd-kmod-0.1.23
> >> input-wacom-40.0.11.1
> >> webcamd-3.2.0.2
> >> 
> >> I believe I've followed all the instructions properly, and when I start
> >> webcamd, everything seems to be correct:
> >> Attached ugen1.2[0] to cuse unit 0
> >> Creating /dev/input/event0
> >> 
> >> According to dmesg, ugen1.2 is the correct device (I have a Bamboo Pen):
> >> ugen1.2:<Wacom Co.,Ltd.>  at usbus1
> >> 
> >> The /dev/input/event0 node is indeed created.  However, when I start X,
> >> I get the following:
> >> (EE) stylus: Wacom X driver can't grab event device (Bad address)
> >> (EE) eraser: Wacom X driver can't grab event device (Bad address)
> >> (EE) cursor: Wacom X driver can't grab event device (Bad address)
> >> (EE) pad: Wacom X driver can't grab event device (Bad address)
> >> (EE) touch: Wacom X driver can't grab event device (Bad address)
> >> Protocol not supported by server
> >> 
> >> The last line repeats indefinitely, and X never finishes starting up.
> >> The system I'm trying this on is 8.3-PRERELEASE.  I had tried this
> >> quickly a while ago on 8.2-STABLE with similar results.
> >> 
> >> Does anyone have any ideas about what might be wrong?
> > 
> > Hi,
> > 
> > I think the wacom has two interfaces.
> > 
> > So you need to do two instances of webcamd, using -i 0 and -i 1 .
> > 
> > Else search google for webcamd-3.4.0.1
> > 
> > --HPS
> 
> My Bamboo Pen is working fine now.  I installed your latest version,
> webcamd-3.4.0.1, and that takes care of getting webcamd started
> properly.  It's still necessary to make sure moused doesn't attach to
> the tablet.  I'm not sure what the best way is to do that, but for now
> I've adjusted /etc/devd.conf so only the first ums device gets attached.
> 
> Thanks Hans, this is great.  I wish I had one or two other devices I
> could try.

Hi,

To avoid ums attach, see "usbconfig dump_quirk_names | grep UMS".

--HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201204012304.32240.hselasky>