Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Nov 2018 12:52:20 +0530
From:      Rajesh Kumar <rajfbsd@gmail.com>
To:        jhb@freebsd.org
Cc:        freebsd-drivers@freebsd.org, freebsd-current@freebsd.org
Subject:   Re: Has anything changed from 11.2 to 12.0 in PCI MSI/MSIX path?
Message-ID:  <CAAO%2BANPu0Z52BxT1Kjr8kDwHR9V9kieA5U71bco_uLTHSW7g%2Bw@mail.gmail.com>
In-Reply-To: <5c64a532-9f5f-4e52-35e6-4800cb065d8f@FreeBSD.org>
References:  <CAAO%2BANOkcmE6Roj7RLPYaYmD4hJu3cdHrAvUfmxb%2B8EkiSu4iA@mail.gmail.com> <2a595c73-4a93-6e3f-f93d-9038baeeb18a@FreeBSD.org> <CAAO%2BANOTD90zLThJHR_LfddF8cvM_N9B7rLcpZ6vcnoY9HNb9A@mail.gmail.com> <2b2d11cb-2196-0214-a3f2-8ab75c7c0248@FreeBSD.org> <CAAO%2BANMgph1PO_C8PsHijCNoW2tofeXRyhqtmAGngq3Un3pWYQ@mail.gmail.com> <5c64a532-9f5f-4e52-35e6-4800cb065d8f@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Thanks John. I tried building a kernel with these changes and things are
working good. I could able to boot without any tunables.

Thanks again.

On Fri, Nov 2, 2018 at 12:05 AM John Baldwin <jhb@freebsd.org> wrote:

> On 10/30/18 1:22 AM, Rajesh Kumar wrote:
> > Hi John,
> >
> > Thanks for your updates.  I assume you are talking about having a
> unified intr_machdep.h compared to having seperate amd64 and i386 versions.
> >
> > Can you please update this thread once all changes are MFC complete or
> tag me in necessary place? So that I can give a try in my board once it's
> ready.
>
> I just committed r340016 which merges r338360 along with followup fixes to
> stable/11.
>
> > On Mon, Oct 29, 2018 at 11:08 PM John Baldwin <jhb@freebsd.org <mailto:
> jhb@freebsd.org>> wrote:
> >
> >     On 10/25/18 10:24 AM, Rajesh Kumar wrote:
> >     > Hi John,
> >     >
> >     > Thanks a lot. It helps. I backported the changes to 11.2 and tried
> booting in my board with success without any need for the said tunables.
> >     >
> >     > I see those changes are marked for MFC after 2 Weeks. But I don't
> see them still in stable/11 branch.  So, will it be taken into stable/11
> branch by any chance? If not, can the backported changes be submitted for
> review to take into stable/11 branch?
> >
> >     I'm working on the MFC.  The current patch I've tested an MFC of is
> the one to
> >     unify sys/x86/include/intr_machdep.h as a precursor to MFC'ing this
> change.
> >
> >     > On Thu, Oct 25, 2018 at 1:17 AM John Baldwin <jhb@freebsd.org
> <mailto:jhb@freebsd.org> <mailto:jhb@freebsd.org <mailto:jhb@freebsd.org>>>
> wrote:
> >     >
> >     >     On 10/24/18 3:40 AM, Rajesh Kumar wrote:
> >     >     > Hi,
> >     >     >
> >     >     > I have a amd64 based board. When I tried to boot 11.1 (or)
> 11.2 in that, I
> >     >     > needed the following tunables to be set from loader prompt
> to get it booted
> >     >     > (otherwise machine reboots continuously).
> >     >     >
> >     >     > hw.usb.xhci.msi=0
> >     >     > hw.usb.xhci.msix=0
> >     >     > hw.pci.enable_msi=0
> >     >     > hw.pci.enable_msix=0
> >     >     >
> >     >     > But, when I tried with 12.0 - ALPHA4, I could able to get it
> booted without
> >     >     > any tunables.  So, has anything changed significantly on PCI
> MSI/MSI-X
> >     >     > path?
> >     >     >
> >     >     > Note: I have a forum topic with my observations about the
> issue on
> >     >     > 11.1/11.2 in the following thread
> >     >     >
> https://forums.freebsd.org/threads/freebsd-11-1-installation-fails-and-rebooting.65814/
> >     >     >
> >     >     > Let me know if you need any details.
> >     >
> >     >     I believe this was fixed by r338360.
> >     >
> >     >     --
> >     >     John Baldwin
> >     >
> >
> >
> >     --
> >     John Baldwin
> >
>
>
> --
> John Baldwin
>
>
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAO%2BANPu0Z52BxT1Kjr8kDwHR9V9kieA5U71bco_uLTHSW7g%2Bw>