Date: Sun, 29 Mar 2020 21:00:19 +0000 From: bugzilla-noreply@freebsd.org To: multimedia@FreeBSD.org Subject: [Bug 244074] snd_hda stops working after some time Message-ID: <bug-244074-12827-ns9nGBoIub@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-244074-12827@https.bugs.freebsd.org/bugzilla/> References: <bug-244074-12827@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D244074 Bob Frazier <bobf@mrp3.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bobf@mrp3.com --- Comment #2 from Bob Frazier <bobf@mrp3.com> --- I have also seen lockups in the audio. When it happens, video playback ten= ds to 'hang' (apparently can't write to the dsp device) and mplayer reports th= at audio is "locked up". reboot to fix (snd_hda is apparently compiled in, ca= n't kldunload or otherwise reset audio system). Easiest way to trigger it: a) run virtualbox 5.2.34 with pulseaudio for sound on the VM (requires compiling it in) b) using a windows 7 VM, play anything that does multimedia [skippy audio, different problem most likely]. Let it run until audio stops working. After this, nothing else can access audio, either. This was happening with a 7/15/2019 kernel [forget which build number]. I recently updated to the latest 12-stable. FreeBSD (computer name) 12.1-STABLE FreeBSD 12.1-STABLE r359419 GENERIC am= d64 Here is the output of /dev/sndstat with verbosity at 2 sysctl hw.snd.verbose=3D2 hw.snd.verbose: 0 -> 2 root@slash:/home/zelgadis # cat /dev/sndstat FreeBSD Audio Driver (64bit 2009061500/amd64) Installed devices: pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> on hdaa0 (1p:1v/0r:0v) snddev flags=3D0x2e7<SIMPLEX,AUTOVCHAN,SOFTPCMVOL,BUSY,MPSAFE,REGISTERED,VPC> [pcm0:play:dsp0.p0]: spd 48000, fmt 0x00200010, flags 0x00006100, 0x00000004 interrupts 1059, underruns 0, feed 1059, ready 0 [b:2048/1024/2|bs:2048/1024/2] channel flags=3D0x6100<BUSY,HAS_VCHAN,VCHAN_PASSTHROUGH> {userland} -> feeder_mixer(0x00200010) -> {hardware} pcm0:play:dsp0.p0[pcm0:virtual:dsp0.vp0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:8192/1024/8] channel flags=3D0x10000000<VIRTUAL> {userland} -> feeder_root(0x00200010) -> feeder_volume(0x00200010) = -> feeder_rate(0x00200010 q:1 44100 -> 48000) -> {hardware} pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> on hdaa0 (1p:1v/0r:0v) snddev flags=3D0x2e7<SIMPLEX,AUTOVCHAN,SOFTPCMVOL,BUSY,MPSAFE,REGISTERED,VPC> [pcm1:play:dsp1.p0]: spd 48000, fmt 0x00200010, flags 0x00006100, 0x00000004 interrupts 1036, underruns 0, feed 1036, ready 0 [b:2048/1024/2|bs:2048/1024/2] channel flags=3D0x6100<BUSY,HAS_VCHAN,VCHAN_PASSTHROUGH> {userland} -> feeder_mixer(0x00200010) -> {hardware} pcm1:play:dsp1.p0[pcm1:virtual:dsp1.vp0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:8192/1024/8] channel flags=3D0x10000000<VIRTUAL> {userland} -> feeder_root(0x00200010) -> feeder_volume(0x00200010) = -> feeder_rate(0x00200010 q:1 44100 -> 48000) -> {hardware} pcm2: <Realtek ALC887 (Rear Analog)> on hdaa1 (1p:1v/1r:1v) default snddev flags=3D0x2e2<AUTOVCHAN,BUSY,MPSAFE,REGISTERED,VPC> [pcm2:play:dsp2.p0]: spd 48000, fmt 0x00200010, flags 0x00002100, 0x00000004 interrupts 412, underruns 0, feed 412, ready 0 [b:2048/1024/2|bs:2048/1024/2] channel flags=3D0x2100<BUSY,HAS_VCHAN> {userland} -> feeder_mixer(0x00200010) -> {hardware} pcm2:play:dsp2.p0[pcm2:virtual:dsp2.vp0]: spd 8000/48000, fmt 0x00100008/0x00200010, flags 0x10000000, 0x0000006b interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:512/64/8] channel flags=3D0x10000000<VIRTUAL> {userland} -> feeder_root(0x00100008) -> feeder_format(0x00100008 -> 0x00100010) -> feeder_rate(0x00100010 q:1 8000 -> 48000) -> feeder_matrix(1= .0 -> 2.0) -> feeder_volume(0x00200010) -> {hardware} [pcm2:record:dsp2.r0]: spd 48000, fmt 0x00200010, flags 0x00002100, 0x00000005 interrupts 3809, overruns 0, feed 7618, hfree 512, sfree 512 [b:512/256/2|bs:512/256/2] channel flags=3D0x2100<BUSY,HAS_VCHAN> {hardware} -> feeder_root(0x00200010) -> feeder_mixer(0x00200010) -> {userland} pcm2:record:dsp2.r0[pcm2:virtual:dsp2.vr0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, overruns 0, feed 0, hfree 0, sfree 32768 [b:0/0/0|bs:32768/256/128] channel flags=3D0x10000000<VIRTUAL> {hardware} -> feeder_root(0x00200010) -> feeder_rate(0x00200010 q:1 48000 -> 44100) -> feeder_volume(0x00200010) -> {userland} pcm3: <Realtek ALC887 (Front Analog)> on hdaa1 (1p:1v/1r:1v) snddev flags=3D0x2e2<AUTOVCHAN,BUSY,MPSAFE,REGISTERED,VPC> [pcm3:play:dsp3.p0]: spd 48000, fmt 0x00200010, flags 0x00002100, 0x00000004 interrupts 992, underruns 0, feed 992, ready 0 [b:2048/1024/2|bs:2048/1024/2] channel flags=3D0x2100<BUSY,HAS_VCHAN> {userland} -> feeder_mixer(0x00200010) -> {hardware} pcm3:play:dsp3.p0[pcm3:virtual:dsp3.vp0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:8192/1024/8] channel flags=3D0x10000000<VIRTUAL> {userland} -> feeder_root(0x00200010) -> feeder_volume(0x00200010) = -> feeder_rate(0x00200010 q:1 44100 -> 48000) -> {hardware} [pcm3:record:dsp3.r0]: spd 48000, fmt 0x00200010, flags 0x00002100, 0x00000005 interrupts 3804, overruns 0, feed 7608, hfree 512, sfree 512 [b:512/256/2|bs:512/256/2] channel flags=3D0x2100<BUSY,HAS_VCHAN> {hardware} -> feeder_root(0x00200010) -> feeder_mixer(0x00200010) -> {userland} pcm3:record:dsp3.r0[pcm3:virtual:dsp3.vr0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, overruns 0, feed 0, hfree 0, sfree 32768 [b:0/0/0|bs:32768/256/128] channel flags=3D0x10000000<VIRTUAL> {hardware} -> feeder_root(0x00200010) -> feeder_rate(0x00200010 q:1 48000 -> 44100) -> feeder_volume(0x00200010) -> {userland} pcm4: <Realtek ALC887 (Internal Digital)> on hdaa1 (1p:1v/0r:0v) snddev flags=3D0x2e7<SIMPLEX,AUTOVCHAN,SOFTPCMVOL,BUSY,MPSAFE,REGISTERED,VPC> [pcm4:play:dsp4.p0]: spd 48000, fmt 0x00200010, flags 0x00006100, 0x00000004 interrupts 970, underruns 0, feed 970, ready 0 [b:2048/1024/2|bs:2048/1024/2] channel flags=3D0x6100<BUSY,HAS_VCHAN,VCHAN_PASSTHROUGH> {userland} -> feeder_mixer(0x00200010) -> {hardware} pcm4:play:dsp4.p0[pcm4:virtual:dsp4.vp0]: spd 44100/48000, fmt 0x00200010, flags 0x10000000, 0x00000029 interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:8192/1024/8] channel flags=3D0x10000000<VIRTUAL> {userland} -> feeder_root(0x00200010) -> feeder_volume(0x00200010) = -> feeder_rate(0x00200010 q:1 44100 -> 48000) -> {hardware} No devices installed from userspace. this is a relatively new system with Ryzen 6 core and Asus motherboard. So= und has been working all along since I built it last year, and no other notable problems observed. Unfortunately I have seen this audio problem happen in = at least one other case as well, after the system had been running for over a month without a reboot, so it may not be related to pulse audio at all. however, the installed version of pulse audio is: pulseaudio-12.2_5 (I shall grab the latest port version of this to see if it helps) here is the dmesg output on last reboot Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-STABLE r359419 GENERIC amd64 FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) VT(vga): resolution 640x480 CPU: AMD Ryzen 5 2600 Six-Core Processor (3393.71-MHz K8-class = CPU) Origin=3D"AuthenticAMD" Id=3D0x800f82 Family=3D0x17 Model=3D0x8 Stepp= ing=3D2 =20 Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> =20 Features2=3D0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVB= E,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=3D0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=3D0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW= ,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> Structured Extended Features=3D0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHO= PT,SHA> XSAVE Features=3D0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=3D0x1007<CLZERO,IRPerf,XSaveErPtr> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=3D32768 TSC: P-state invariant, performance statistics real memory =3D 17179869184 (16384 MB) avail memory =3D 16552849408 (15786 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Leng= th but zero Address: 0x0000000000000000/0x1 (20191213/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard Launching APs: 9 7 8 11 10 6 2 1 4 5 3 Timecounter "TSC-low" frequency 1696856819 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81118130, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf76a0000-0xf76a7fff irq 32= at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table=20 usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xf7680000-0xf769ffff irq 33 at device 0.= 1 on pci1 ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf7504000-0xf7504fff,0xf7500000-0xf7503fff irq 32 at dev= ice 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 04:92:26:4d:0c:77 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci8 vgapci0: Boot video device hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci8 pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.2 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 37= at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table=20 usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci10: <ACPI PCI bus> on pcib10 pci10: <unknown> at device 0.0 (no driver attached) ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7708000-0xf7708fff irq 42 at device 0.2 on pci10 ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich8: <AHCI channel> at channel 0 on ahci1 hdac1: <AMD (0x1457) HDA Controller> mem 0xf7700000-0xf7707fff irq 43 at de= vice 0.3 on pci10 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 pcm4: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD2003FYYS-70W0B0 HPG3> ATA8-ACS SATA 2.x device ada0: Serial Number WD-WMAY04927842 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) cd0 at ahcich4 bus 0 scbus2 target 0 lun 0 cd0: <ASUS DRW-24B1ST j 1.11> Removable CD-ROM SCSI device cd0: Serial Number JBD0KQ014076 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - t= ray closed uhub1: 8 ports with 8 removable, self powered uhub0: 22 ports with 22 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x13ba Barcode Reader> at usbus0 ukbd0 on uhub0 ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0 kbd2 at ukbd0 Setting hostuuid: 7ec5043d-7771-f7cf-7359-0492264d0c77. Setting hostid: 0x40159d2f. Starting file system checks: Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/gcc8 /usr/local/lib/graphviz /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/opencollada /usr/local/lib/perl5/5.28/mach/CORE /usr/local/lib/qt5 /usr/local/lib/samba4 /usr/local/lib/vtk-6.2 /usr/local/llvm60/lib /usr/local/llvm80/lib /usr/local/share/chromium 32-bit compatibility ldconfig path: /usr/lib32 Loading kernel modules: amdsmn0: <AMD Family 17h System Management Network> on hostb0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 nvidia0: <GeForce GT 710> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platform= s=20 390.87 Tue Aug 21 15:53:31 PDT 2018 Setting hostname: (computer host name). Additional TCP/IP options: ipv4-mapped-ipv6=3DYES. Setting up harvesting: PURE_RDRAND,[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,K= EYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP re0: link state changed to DOWN Starting Network: lo0 re0. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC= ,LINKSTATE> ether 04:92:26:4d:0c:77 inet6 2001:470:d:c9c::3 prefixlen 64 inet6 fe80::692:26ff:fe4d:c77%re0 prefixlen 64 scopeid 0x1 media: Ethernet autoselect (none) status: no carrier nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> Starting devd. Autoloading module: intpm.ko intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 Configuring vt: keyrate. Autoloading module: uhid.ko Autoloading module: ums.ko ums0 on uhub0 ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0 add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 add net default: gateway 2001:470:d:c9c::1 ums0: 5 buttons and [XYZ] coordinates ID=3D1 Waiting 30s for the default route interface:=20 re0: link state changed to UP .(re0) Creating and/or trimming log files. Starting syslogd. No core dumps found. Additional ABI support: linux. Clearing /tmp. Starting dbus. Updating motd:. Mounting late filesystems:. Security policy loaded: MAC/ntpd (mac_ntpd) Starting ntpd. Updating /var/run/os-release done. Starting powerd. Performing sanity check on Samba configuration: OK Starting nmbd. Starting smbd. Starting winbindd. Starting rsyncd. Performing sanity check on sshd configuration. Starting sshd. LOG: ending log output to stderr HINT: Future log output will go to log destination "syslog". Starting hald. Starting cupsd. Performing sanity check on apache24 configuration: Syntax OK Starting apache24. Configuring vt: keyrate. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. kldstat output: Id Refs Address Size Name 1 56 0xffffffff80200000 226f260 kernel 2 1 0xffffffff82470000 3ad5d8 zfs.ko 3 2 0xffffffff8281e000 a430 opensolaris.ko 4 1 0xffffffff82b21000 1480 amdtemp.ko 5 1 0xffffffff82b23000 818 amdsmn.ko 6 2 0xffffffff82b24000 c42988 nvidia.ko 7 2 0xffffffff83767000 3d620 linux.ko 8 4 0xffffffff837a5000 3148 linux_common.ko 9 1 0xffffffff837a9000 f4ef0 nvidia-modeset.ko 10 1 0xffffffff8389e000 2658 intpm.ko 11 1 0xffffffff838a1000 b60 smbus.ko 12 1 0xffffffff838a2000 1880 uhid.ko 13 1 0xffffffff838a4000 2968 ums.ko 14 3 0xffffffff838a7000 520e0 vboxdrv.ko 15 2 0xffffffff838fa000 2ce0 vboxnetflt.ko 16 2 0xffffffff838fd000 9be0 netgraph.ko 17 1 0xffffffff83907000 16e0 ng_ether.ko 18 1 0xffffffff83909000 3f20 vboxnetadp.ko 19 1 0xffffffff8390d000 35490 linux64.ko 20 1 0xffffffff83943000 acf mac_ntpd.ko --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-244074-12827-ns9nGBoIub>