Date: Sun, 17 Jan 2021 11:19:20 +0100 From: =?UTF-8?Q?BERTRAND_Jo=c3=abl?= <joel.bertrand@systella.fr> To: freebsd-hackers@freebsd.org Subject: Mounting swap device on iscsi target Message-ID: <fe95f085-b516-f431-9bfd-6c4f9b63e900@systella.fr>
next in thread | raw e-mail | index | archive | help
Hello, I'm trying to mount iSCSI swap device during boot process. Of course, I have checked that configuration doesn't contains errors. On running system, if I start /etc/rc.d/iscsictl start, device is mounted without error. But not during boot, I obtains : Jan 17 10:48:17 pythagore iscsid[1009]: cannot open or create pidfile "/var/run/iscsid.pid": Operation not supported Jan 17 10:48:17 pythagore root[1010]: /etc/rc: WARNING: failed to start iscsid Jan 17 10:48:28 pythagore root[1014]: /etc/rc: WARNING: failed to start iscsictl Jan 17 10:49:20 pythagore kernel: WARNING: 192.168.10.128 (iqn.2020-02.fr.systella.legendre.istgt:pythagore): timed out waiting for iscsid(8) for 61 seconds; reconnecting Jan 17 10:50:23 pythagore kernel: WARNING: 192.168.10.128 (iqn.2020-02.fr.systella.legendre.istgt:pythagore): timed out waiting for iscsid(8) for 61 seconds; reconnecting This workstation doesn't have any hard disk : root@pythagore:/var/log # df -h Filesystem Size Used Avail Capacity Mounted on 192.168.10.128:/srv/pythagore 523G 221G 276G 44% / devfs 1.0K 1.0K 0B 100% /dev procfs 4.0K 4.0K 0B 100% /proc fdescfs 1.0K 1.0K 0B 100% /dev/fd 192.168.10.128:/home 3.6T 2.4T 1.0T 71% /home After boot, /var/run/iscsid.pid is created but doesn't contains anything. If I start by hands iscsid and iscsictl, this file contains real PID of iscsid and target is connected as da0. For information, rc.conf contains : iscsid_enable="YES" iscsictl_enable="YES" iscsictl_flags="-Aa -w 10" Best regards, JKB
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?fe95f085-b516-f431-9bfd-6c4f9b63e900>