Date: Fri, 10 Feb 2023 17:56:30 +0000 From: bugzilla-noreply@freebsd.org To: usb@FreeBSD.org Subject: [Bug 269471] U-Blox C099-F9P eval board patch Message-ID: <bug-269471-19105@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D269471 Bug ID: 269471 Summary: U-Blox C099-F9P eval board patch Product: Base System Version: 13.1-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: usb Assignee: usb@FreeBSD.org Reporter: stacy@millions.ca Created attachment 240055 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=3D240055&action= =3Dedit patch The C099-F9P eval board has a USB hub and 3 USB devices, the first device is the USB port of the ZED-F9P GNSS chip, the second is a FTDI serial bridge connected to the UART of the ZED-F9P and the third is a FTDI serial bridge connected to the UART of the ODIN-W2 communications chip. The first device is recognized by FreeBSD (by umodem), the other two are not recognized. dmesg output after plugging in the board: ugen1.3: <vendor 0x0424 product 0x2514> at usbus1 uhub4 on uhub2 uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbus1 uhub4: MTT enabled uhub4: 3 ports with 3 removable, self powered ugen1.4: <u-blox AG C099 ZED-F9P> at usbus1 ugen1.5: <u-blox AG C099 ODIN-W2> at usbus1 ugen1.6: <u-blox AG - www.u-blox.com u-blox GNSS receiver> at usbus1 umodem0 on uhub4 umodem0: <u-blox AG - www.u-blox.com u-blox GNSS receiver, class 2/0, rev 1.10/1.00, addr 6> on usbus1 umodem0: data interface 1, has CM over data, has no break dmesg output after patching and compiling uftdi.ko and kldload ./uftdi.ko: uftdi0 on uhub4 uftdi0: <C099 ZED-F9P> on usbus1 uftdi1 on uhub4 uftdi1: <C099 ODIN-W2> on usbus1 --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-269471-19105>