Date: Fri, 17 Sep 1999 16:26:23 +0100 From: graeme.n.brown@bt.com To: doogie@anet-stl.com Cc: freebsd-mobile@freebsd.org Subject: RE: Is 3Com Megahetz 3CCFE574BT Supported under FreeBSD-3.2-RELEA SEa nd PAO3 ? Message-ID: <71DA16F18D32D2119A1D0000F8FE9A9402B5A2CF@mbtlipnt01.btlabs.bt.co.uk>
next in thread | raw e-mail | index | archive | help
Jason
thanks for tip off. I found the Sep 6 patch email from freebsd-current
archives
however according to
Jerry Alexandratos <darkstar@UDel.Edu> :-
>More bad news. The patch doesn't work. ( Here's the output I'm
getting.
>Sep 6 12:41:30 hellboy pccardd[318]: Found existing driver (ep0) for 3Com
>Sep 6 12:41:30 hellboy pccardd[318]: Using I/O addr 0x300, size 32
>Sep 6 12:41:30 hellboy pccardd[318]: Setting config reg at offs 0x10000 to
0x41
, Reset time = 50 ms
>Sep 6 12:41:35 hellboy pccardd[318]: Assigning I/O window 0, start 0x300,
size
0x20 flags 0x7
>Sep 6 12:41:35 hellboy pccardd[318]: Assign ep0, io 0x300-0x31f, mem 0x0,
0 byt
es, irq 11, flags 0
>Sep 6 12:41:35 hellboy pccardd[318]: driver allocation failed for
3Com(Megahert
>z 574B): Inappropriate ioctl for device
>This was with source cvsup'd approx 12:00 EDT today (1999-09-06).>
Obviously ( I presume) you had success with your patch which will show up
in freebsd-current archives sometime soon !
Thanks
Graeme
> -----Original Message-----
> From: Jason Young [SMTP:doogie@anet-stl.com]
> Sent: Friday, September 17, 1999 3:34 PM
> To: Nick Hibma; graeme.n.brown
> Cc: freebsd-mobile
> Subject: RE: Is 3Com Megahetz 3CCFE574BT Supported under
> FreeBSD-3.2-RELEASEa nd PAO3 ?
>
>
> Look for "574B" on the -current mailing list, patches have been sent
> on Sep 6, plus I sent patches yesterday that aren't in the archives
> yet. I had somehow missed that message on -current and ended up doing
> patches myself, although mine are a bit more enhancing to the driver.
>
> Jason Young
> accessUS Chief Network Engineer
>
>
> > -----Original Message-----
> > From: owner-freebsd-mobile@FreeBSD.ORG
> > [mailto:owner-freebsd-mobile@FreeBSD.ORG]On Behalf Of Nick Hibma
> > Sent: Friday, September 17, 1999 9:26 AM
> > To: graeme.n.brown@bt.com
> > Cc: freebsd-mobile@FreeBSD.ORG
> > Subject: Re: Is 3Com Megahetz 3CCFE574BT Supported under
> > FreeBSD-3.2-RELEASEa nd PAO3 ?
> >
> >
> >
> > It looks like the cards are very cheap. Everybody buys them.
> >
> > Check the archives, there should be more informatio there.
> >
> > Nick
> >
> >
> >
> > > Am trying to get a suitable 100BaseT/10BaseT PCMCIA
> > Ethernet card working
> > > under FreeBSD-3.2-RELEASE and PAO3. Just bought a 3Com card which
> > > I thought was a 3C574-TX but its product code appears to be
> > > 3Com Megahertz 3CCFE574BT.
> > >
> > > I get the following pccardc dumpcis output :-
> > >
> > > Configuration data for card in slot 0
> > > Tuple #1, code = 0x1 (Common memory descriptor), length = 2
> > > 000: 00 ff
> > > Common memory device information:
> > > Device number 1, type No device, WPS = OFF
> > > Speed = No speed, Memory block size =
> > reserved, 32 units
> > > Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
> > > 000: 43 02 ff
> > > Attribute memory device information:
> > > Device number 1, type EEPROM, WPS = OFF
> > > Speed = 150nS, Memory block size = 8Kb, 1 units
> > > Tuple #3, code = 0x20 (Manufacturer ID), length = 4
> > > 000: 01 01 74 05
> > > PCMCIA ID = 0x101, OEM ID = 0x574
> > > Tuple #4, code = 0x21 (Functional ID), length = 2
> > > 000: 06 00
> > > Network/LAN adapter
> > > Tuple #5, code = 0x15 (Version 1 info), length = 29
> > > 000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a
> > > 010: 20 35 37 34 42 00 42 00 30 30 31 00 ff
> > > Version = 4.1, Manuf = [3Com], card vers = [Megahertz 574B]
> > > Addit. info = [B],[001]
> > > Tuple #6, code = 0x1a (Configuration map), length = 6
> > > 000: 02 03 00 00 01 03
> > > Reg len = 3, config register addr = 0x10000, last config = 0x3
> > > Registers: XX------
> > > Tuple #7, code = 0x1b (Configuration entry), length = 15
> > > 000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff
> > > Config index = 0x1(default)
> > > Interface byte = 0x1 (I/O)
> > > Vcc pwr:
> > > Nominal operating supply voltage: 5 x 1V
> > > Max current average over 1 second: 3 x 10mA
> > > Max current average over 10 ms: 5 x 10mA
> > > Power down supply current: 5 x 1mA
> > > Wait scale Speed = 7.0 x 100 ns
> > > RDY/BSY scale Speed = 5.0 x 100 us
> > > Card decodes 5 address lines, full 8/16 Bit I/O
> > > IRQ modes: Level
> > > IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
> > > Tuple #8, code = 0x19 (JEDEC descr for attribute
> > memory), length = 3
> > > 000: 00 00 ff
> > > Tuple #9, code = 0x14 (No link), length = 0
> > > Tuple #10, code = 0x10 (Checksum), length = 5
> > > 000: ae ff 5b 00 00
> > > Checksum from offset 65454, length 91, value is 0x0
> > > Tuple #11, code = 0xff (Terminator), length = 0
> > > 2 slots found
> > >
> > > I concocted this entry in etc/pccard.conf :-
> > >
> > > # 3Com Megahertz 3CCFE574BT (experimental)
> > > card "3Com" "Megahertz 574B"
> > > config default "ep0" any
> > > insert logger -s 3Com Megahertz 3C574B inserted
> > > insert /etc/pccard_ether $device
> > > remove logger -s 3Com Megahertz 3C574B removed
> > > remove /etc/pccard_ether_remove $device
> > >
> > > I get the following /var/log/messages :-
> > >
> > > Sep 17 14:02:51 myname /kernel: Card inserted, slot 0
> > > Sep 17 14:02:52 myname lpd[149]: restarted
> > > Sep 17 14:02:53 myname pccardd[54]: Card
> > "3Com"("Megahertz 574B") [B] [001]
> > > matched "3Com" ("Megahertz 574B") [(null)] [(null)]
> > > Sep 17 14:02:56 myname /kernel: card0: assign ep0 iobase
> > 0x300 irq 9
> > > Sep 17 14:02:56 myname /kernel: ep0: failed to come ready.
> > > Sep 17 14:02:56 myname /kernel: Return IRQ=9
> > > Sep 17 14:02:56 myname pccardd[54]: driver allocation
> > failed for 3Com
> > > (Device not configured)
> > > Sep 17 14:02:56 myname pccardd[54]: pccardd started
> > >
> > > Has anyone had experience with this card and got it to work ?
> > >
> > > I could have bought a D-Link DE650 card from same supplier.
> > > Perhaps this would be a better choice as to finding a suported
> > > 100BaseT/10BaseT card.
> > >
> > > TIA
> > > Graeme N Brown
> > > email: graeme.n.brown@bt.com
> > >
> > >
> > >
> > >
> > >
> > >
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-mobile" in the body of the message
> > >
> > >
> >
> > --
> > ISIS/STA, T.P.270, Joint Research Centre, 21020 Ispra, Italy
> >
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-mobile" in the body of the message
> >
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?71DA16F18D32D2119A1D0000F8FE9A9402B5A2CF>