Date: Wed, 20 Feb 2008 09:02:08 -0500 From: "Michael C. Cambria" <mcc@fid4.com> To: freebsd-mobile@freebsd.org Cc: Benjamin Close <Benjamin.Close@clearchain.com> Subject: Re: FreeBSD 7 doesn't see AR5212 (Netgear WPN511) via PCI/Cardbus Adapter Message-ID: <47BC32E0.3020307@fid4.com> In-Reply-To: <47BA23DC.9050509@clearchain.com> References: <47B87D41.50604@fid4.com> <47BA0A1E.4030502@fid4.com> <47BA23DC.9050509@clearchain.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Benjamin Close wrote:
>
> Perhaps the relevant sections of a boot -v and pciconf -lv could help.
When I made this discovery, I didn't have access to the system with the
pic->cardbus, just the laptop.
I have tried with another ath based card which arrived last night, with
the same result. Here is pciconf -lv and boot -v with the Netgear
WPN511 plugged in at boot time. The pci->cardbus adapter is detected.
Using various 802.11b cards, it works just fine.
cbb0@pci0:1:8:0: class=0x060700 card=0x3000133f chip=0xac50104c
rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1410 PC card cardBus Controller'
class = bridge
subclass = PCI-CardBus
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[deleted]
cbb0: <TI1410 PCI-CardBus Bridge> at device 8.0 on pci1
pcib1: cbb0 requested memory range 0xfe900000-0xfeafffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfe900000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 1.8.INTA
pcib1: slot 8 INTA hardwired to IRQ 17
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 53
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
0x00: 0xac50104c 0x02100107 0x06070001 0x00024010
0x10: 0xfe900000 0x020000a0 0x20030201 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400111
0x40: 0x3000133f 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844b060 0x00000000 0x00000000 0x00001d92
0x90: 0x600200c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000000b 0x0000001f
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xdec0-0xdeff mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000
MikeC
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47BC32E0.3020307>