Date: Mon, 22 Aug 2005 17:06:40 -0400 From: Mike Tancsa <mike@sentex.net> To: "Simon L. Nielsen" <simon@FreeBSD.org> Cc: freebsd-stable@FreeBSD.org Subject: Re: ata breakage from RELENG_5 to RELENG_6 Message-ID: <6.2.3.4.0.20050822170547.07a67660@64.7.153.2> In-Reply-To: <20050822210530.GD853@zaphod.nitro.dk> References: <6.2.3.4.0.20050822161456.07b27678@64.7.153.2> <20050822210530.GD853@zaphod.nitro.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
At 05:05 PM 22/08/2005, Simon L. Nielsen wrote: >On 2005.08.22 16:24:12 -0400, Mike Tancsa wrote: > > > [verify1] /usr/ports/sysutils/smartmontools# smartctl -a ad0 > > smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 > > Bruce Allen > > Home page is http://smartmontools.sourceforge.net/ > >I think you have to specify full path for the device now... I ran in >to the same thing and it confused me for a bit... Thanks, that was it! # smartctl -a /dev/ad0 smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3120026AS Serial Number: 3JT1BSB2 Firmware Version: 3.18 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Aug 22 17:06:21 2005 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 059 057 006 Pre-fail Always - 30554783 3 Spin_Up_Time 0x0003 099 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 213765438 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7941 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 43 194 Temperature_Celsius 0x0022 034 046 000 Old_age Always - 34 195 Hardware_ECC_Recovered 0x001a 059 057 000 Old_age Always - 30554783 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7926 - # 2 Short offline Completed without error 00% 7902 - # 3 Short offline Completed without error 00% 7879 - # 4 Short offline Completed without error 00% 7855 - # 5 Short offline Completed without error 00% 7831 - # 6 Short offline Completed without error 00% 7808 - # 7 Short offline Completed without error 00% 7785 - # 8 Short offline Completed without error 00% 7761 - # 9 Short offline Completed without error 00% 7737 - #10 Short offline Completed without error 00% 7714 - #11 Short offline Completed without error 00% 7690 - #12 Short offline Completed without error 00% 7667 - #13 Short offline Completed without error 00% 7643 - #14 Short offline Completed without error 00% 7620 - #15 Short offline Completed without error 00% 7596 - #16 Short offline Completed without error 00% 7572 - #17 Short offline Completed without error 00% 7549 - #18 Short offline Completed without error 00% 7525 - #19 Short offline Completed without error 00% 7502 - #20 Short offline Completed without error 00% 7479 - #21 Short offline Completed without error 00% 7455 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20050822170547.07a67660>