From owner-freebsd-hackers Wed Mar 29 13:52:57 1995 Return-Path: hackers-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA02455 for hackers-outgoing; Wed, 29 Mar 1995 13:52:57 -0800 Received: from prosun.first.gmd.de (prosun.first.gmd.de [192.35.150.136]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id NAA02445 for ; Wed, 29 Mar 1995 13:52:49 -0800 Received: from freebsd.first.gmd.de by prosun.first.gmd.de (4.1/SMI-4.1) id AA22873; Wed, 29 Mar 95 23:00:59 +0200 Received: by freebsd.first.gmd.de (XAA01815); Wed, 29 Mar 1995 23:02:45 +0200 From: Andreas Schulz Message-Id: <199503292102.XAA01815@freebsd.first.gmd.de> Subject: Re: 950322-SNAP adaptec AHA-2940 pci card To: cmjones@wolf.co.net (Craig M. Jones) Date: Wed, 29 Mar 1995 23:02:44 +0159 (MET DST) Cc: hackers@FreeBSD.org In-Reply-To: <59853.cmjones@wolf.co.net> from "Craig M. Jones" at Mar 29, 95 01:10:32 pm X-Mailer: ELM [version 2.4 PL24] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 943 Sender: hackers-owner@FreeBSD.org Precedence: bulk > I am installing 950322-SNAP on pentium 90 pci with an adaptec 2940 scsi > controller. The boot floppies finds the card & I can install all the way to > the reboot from hard disk. While rebooting it hangs on waiting for scsi > devices to settle. I then booted the fixit disk, which booted ok. I can > mount & use the hard drive with this disk. I tried to lower the bus speed > as somone else on the list suggested from 10MHZ to 5MHZ no luck. Have you tried to do a reset after the halt from the boot floppies ? Some machines with certain cards need that. I have in the moment two of them, my pentium hangs at the rebooting and one 486 with a Buslogic VL card and a 3COM 3C507 card needs a reset, otherwise it doesn't find the harddisk. ATS ( ats@first.gmd.de or ats@cs.tu-berlin.de ) Andreas Schulz GMD-FIRST 12489 Berlin-Adlershof Rudower Chaussee 5 Gebaeude 13.7 Tel: +49-30-6392-1856/+49-177-2134745 Germany/Europe