From owner-freebsd-arm@FreeBSD.ORG Thu Oct 17 20:48:27 2013 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 482223C2 for ; Thu, 17 Oct 2013 20:48:27 +0000 (UTC) (envelope-from paul@gromit.dlib.vt.edu) Received: from lennier.cc.vt.edu (lennier.cc.vt.edu [198.82.162.213]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 02C902196 for ; Thu, 17 Oct 2013 20:48:26 +0000 (UTC) Received: from mr2.cc.vt.edu (mr2.cc.vt.edu [198.82.163.74]) by lennier.cc.vt.edu (8.13.8/8.13.8) with ESMTP id r9HCrbLp026916 for ; Thu, 17 Oct 2013 08:53:37 -0400 Received: from auth1.smtp.vt.edu (auth1.smtp.vt.edu [198.82.161.152]) by mr2.cc.vt.edu (8.14.4/8.14.4) with ESMTP id r9HCrb7l011216 for ; Thu, 17 Oct 2013 08:53:37 -0400 Received: from [IPv6:2001:468:c80:c111:4cfc:9f68:de6:73b5] ([IPv6:2001:468:c80:c111:4cfc:9f68:de6:73b5]) (authenticated bits=0) by auth1.smtp.vt.edu (8.14.4/8.14.4) with ESMTP id r9HCrbJt027623 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=NO) for ; Thu, 17 Oct 2013 08:53:37 -0400 From: Paul Mather Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: umass not probed until multi-user on 11-CURRENT Message-Id: <62147506-E78E-4C43-A98D-4049640F361C@gromit.dlib.vt.edu> Date: Thu, 17 Oct 2013 08:53:37 -0400 To: "freebsd-arm@freebsd.org" Mime-Version: 1.0 (Mac OS X Mail 6.6 \(1510\)) X-Mailer: Apple Mail (2.1510) X-Spam-Status: No, score=-0.4 required=5.0 tests=RP_MATCHES_RCVD autolearn=disabled version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mr2.cc.vt.edu X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 17 Oct 2013 20:48:27 -0000 I just created a new image for my BeagleBone Black using Crochet. I'm = using the standard BEAGLEBONE kernel config file. The source is FreeBSD = 11.0-CURRENT r256450. Unlike previously, now when I boot my BBB it does = not probe umass devices until after it goes multiuser. This has created = a problem because I am using an external USB hard drive for swap, = /usr/src, /usr/obj, and /usr/ports. Because of the new probe order, the = devices referenced in /etc/fstab don't exist and the system drops into = single-user. E.g.: KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 r256450: Mon Oct 14 21:19:01 EDT 2013 = pmather@builder:/usr/home/pmather/crochet-freebsd/work/obj/arm.armv6/usr/s= rc/sys/BEAGLEBONE arm FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 WARNING: WITNESS option enabled, expect reduced performance. CPU: Cortex A8-r3 rev 2 (Cortex-A core) Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext WB disabled EABT branch prediction enabled LoUU:2 LoC:2 LoUIS:1=20 Cache level 1:=20 32KB/64B 4-way data cache WT WB Read-Alloc 32KB/64B 4-way instruction cache Read-Alloc Cache level 2:=20 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc real memory =3D 536870912 (512 MB) avail memory =3D 515653632 (491 MB) Texas Instruments AM3358 Processor, Revision ES1.1 random device not loaded; using insecure entropy random: initialized simplebus0: on fdtbus0 aintc0: mem 0x48200000-0x48200fff on = simplebus0 aintc0: Revision 5.0 ti_scm0: mem 0x44e10000-0x44e11fff on simplebus0 am335x_prcm0: mem = 0x44e00000-0x44e012ff on simplebus0 am335x_prcm0: Clocks: System 24.0 MHz, CPU 550 MHz am335x_dmtimer0: mem = 0x44e05000-0x44e05fff,0x44e31000-0x44e31fff,0x48040000-0x48040fff,0x480420= 00-0x48042fff,0x48044000-0x48044fff,0x48046000-0x48046fff,0x48048000-0x480= 48fff,0x4804a000-0x4804afff irq 66,67,68,69,92,93,94,95 on simplebus0 Timecounter "AM335x Timecounter" frequency 24000000 Hz quality 1000 Event timer "AM335x Eventtimer0" frequency 24000000 Hz quality 1000 gpio0: mem = 0x44e07000-0x44e07fff,0x4804c000-0x4804cfff,0x481ac000-0x481acfff,0x481ae0= 00-0x481aefff irq 96,97,98,99,32,33,62,63 on simplebus0 gpioc0: on gpio0 gpiobus0: on gpio0 uart0: mem 0x44e09000-0x44e09fff irq 72 on = simplebus0 uart0: console (115384,n,8,1) ti_edma30: mem = 0x49000000-0x490fffff,0x49800000-0x498fffff,0x49900000-0x499fffff,0x49a000= 00-0x49afffff irq 12,13,14 on simplebus0 ti_edma30: EDMA revision 40014c00 sdhci_ti0: mem 0x48060000-0x48060fff irq 64 on = simplebus0 mmc0: on sdhci_ti0 sdhci_ti1: mem 0x481d8000-0x481d8fff irq 28 on = simplebus0 mmc1: on sdhci_ti1 cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a103fff irq = 40,41,42,43 on simplebus0 cpsw0: CPSW SS Version 1.12 (0) cpsw0: Initial queue size TX=3D128 RX=3D384 cpsw0: Ethernet address: 90:59:af:55:26:eb miibus0: on cpsw0 smscphy0: PHY 0 on miibus0 smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto iichb0: mem 0x44e0b000-0x44e0bfff irq 70 on = simplebus0 iichb0: I2C revision 4.0 iicbus0: on iichb0 iic0: on iicbus0 am335x_pmic0: at addr 0x24 on iicbus0 am335x_pwm0: mem = 0x48300000-0x483000ff,0x48300100-0x4830017f,0x48300180-0x483001ff,0x483002= 00-0x4830025f irq 86,58 on simplebus0 am335x_pwm1: mem = 0x48302000-0x483020ff,0x48302100-0x4830217f,0x48302180-0x483021ff,0x483022= 00-0x4830225f irq 87,59 on simplebus0 am335x_pwm2: mem = 0x48304000-0x483040ff,0x48304100-0x4830417f,0x48304180-0x483041ff,0x483042= 00-0x4830425f irq 88,60 on simplebus0 musbotg0: mem = 0x47400000-0x47400fff,0x47401000-0x474012ff,0x47401300-0x474013ff,0x474014= 00-0x474017ff,0x47401800-0x47401aff,0x47401b00-0x47401bff,0x47401c00-0x474= 01fff irq 17,18,19 on simplebus0 musbotg0: TI AM335X USBSS v0.0.13 usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM usbus0 on musbotg0 usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM usbus1 on musbotg0 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: = on usbus0 ugen1.1: at usbus1 uhub1: = on usbus1 mmcsd0: 16GB at mmc0 = 48.0MHz/4bit/65535-block uhub0: 1 port with 1 removable, self powered uhub1: 1 port with 1 removable, self powered mmcsd1: 2GB at = mmc1 48.0MHz/8bit/65535-block am335x_pmic0: TPS65217C ver 1.2 powered by AC random: unblocking device. WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... warning: no time-of-day clock registered, system time will not be set = accurately Enlarging root partition mmcsd0s2 resized mmcsd0s2a resized growfs: requested size 15GB is not larger than the current filesystem = size 15GB Setting hostuuid: de51addd-3538-11e3-8cc8-9059af5526eb. Setting hostid: 0x4421ab53. No suitable dump device was found. Entropy harvesting: interrupts ethernet point_to_point swi. swapon: /dev/da0s1a: No such file or directory Starting file system checks: /dev/mmcsd0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s2a: clean, 3670983 free (927 frags, 458757 blocks, 0.0% = fragmentation) Can't stat /dev/ufs/ports: No such file or directory Can't stat /dev/ufs/src: No such file or directory Can't stat /dev/ufs/obj: No such file or directory Can't stat /dev/ufs/ports: No such file or directory Can't stat /dev/ufs/src: No such file or directory Can't stat /dev/ufs/obj: No such file or directory THE FOLLOWING FILE SYSTEMS HAD AN UNEXPECTED INCONSISTENCY: ufs: /dev/ufs/src (/usr/src), ufs: /dev/ufs/ports (/usr/ports), = ufs: /dev/ufs/obj (/usr/obj) Unknown error; help! ERROR: ABORTING BOOT (sending SIGTERM to parent)! Oct 16 20:38:19 init: /bin/sh on /etc/rc terminated abnormally, going to = single user mode^M Enter full pathname of shell or RETURN for /bin/sh: ugen1.2: at = usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks =3D 0x4100 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: 286103MB (585938944 512 byte sectors: 255H 63S/T 36473C) da0: quirks=3D0x2 # ls /dev/ufs obj ports src # I know I could work around the problem by adding "late" to the = /etc/fstab options for the file systems that are causing the boot to = fail. I'm not sure whether this also works for swap, though. Is this an expected behaviour now? My Raspberry Pi, still running = FreeBSD 10.0-ALPHA1 r255586 probes umass devices before the "Trying to = mount root from ufs:/dev/mmcsd0s2a [rw,noatime]..." point, e.g.: [...] ugen0.3: at usbus0 smsc0: on usbus0 smsc0: chip 0xec00, rev. 0002 miibus0: on smsc0 ukphy0: PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: on smsc0 ue0: Ethernet address: b8:27:eb:7b:95:7d smsc0: chip 0xec00, rev. 0002 Sending DHCP Discover packet from interface ue0 (b8:27:eb:7b:95:7d) ugen0.4: at usbus0 umass0: on = usbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: 286168MB (586072368 512 byte sectors: 255H 63S/T 36481C) da0: quirks=3D0x2 Received DHCP Offer packet on ue0 from 10.23.5.1 (accepted) Received DHCP Offer packet on ue0 from 10.23.5.1 (ignored) Received DHCP Offer packet on ue0 from 10.23.5.1 (ignored) Sending DHCP Request packet from interface ue0 (b8:27:eb:7b:95:7d) Received DHCP Ack packet on ue0 from 10.23.5.1 (accepted) ue0 at 10.23.5.55 server 10.23.5.1 subnet mask 255.255.255.0 router 10.23.5.1 hostname pi=20 Adjusted interface ue0 Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... warning: no time-of-day clock registered, system time will not be set = accurately Cheers, Paul.